Men's hat knitting pattern:

Men's knitted hat, by for_bat

For size 58, I gained 160 p. I knitted a hollow elastic band for 4, then I switched to an elastic band 2x2 and knitting needles 3.5.

Gray men's knitted hat

Hat size: S/M - L/XL for head circumference: 54/55 - 56/58.

Materials: DROPS ALASKA yarn (100% wool, 50 g / 70 m) - 100 g of light gray and 50 g of dark blue, a classic men's hat is knitted with knitting needles 4.5 (double-sided and circular, the length of circular needles is 40 cm.) and 3.5 mm. (circular, length 40 cm).
Knitting density: 18 p. * 38 p. \u003d 10 * 10 cm. front smooth surface with knitting needles 4.5 mm.

Men's hat knitting pattern:

Men's knitted hat, size 56-60

You will need:

• yarn Lana Gold Alize (50% wool, 50% acrylic; 230m / 100gr) - 100 gr
• circular knitting needles with short line 3 and 3.5 cm
• thick needle.

Men's hat knitting video master classes

This video shows a detailed master class on knitting a warm men's hat with a three-dimensional pattern “oblique loops”:

Men's hat - beanie with rhombuses

The set is a multiple of 24 loops, for a head circumference of 55-60 cm we collect 72 loops, yarn 100 g - 240 m (in two threads - 120 m), knitting needles No. 6, for a head circumference of 50-55 cm - take knitting needles No. 5. To increase or decrease the size of the hat, you can simply knit knitting needles half a size or a size up or down.

The video should load here, please wait or refresh the page.

Men's hat with a pattern of "plaits"

In this video, we will knit a men's hat in size 56-60 from Alize LANAGOLD yarn, knitting needles No. 3 and 3.5.

The video should load here, please wait or refresh the page.

Knitted men's hat - stocking

Hat for beginners. Unisex hat, suitable for both men and women.

The video should load here, please wait or refresh the page.

Men's hat - beanie

The hat is crocheted in garter stitch.

The video should load here, please wait or refresh the page.

DIY knitted hats are at the peak of popularity today. They not only look stylish and original, but also perform their main function - they warm in extreme cold. A men's hat with knitting needles can be made in both a business style and a sporty one, be fancy or overly formal, but it will always be special, unusual.

In the Middle Ages, a knight's head on the battlefield was protected by a helmet, and now a young man's head is protected by a warm hat in winter. And no matter how our men assure that they do not freeze at all in the winter cold - you can’t let them out of the house without a hat! And so that the husband has nothing to object to - we knit him a stylish hat and scarf with our own hands. If you want to make a surprise - the dimensions of the head can be carefully removed while he is sleeping: you will need a circumference and height. Our article will help you choose a pattern and style, and MK and a training video will help you tie it.

DIY knitted hats are at the peak of popularity today.

The simplest headwear model for men is, of course, a beanie hat. It is also often referred to as a stocking cap. It is knitted with the usual front stitch, it looks democratic, unofficial. It can be called both sports and classic.

• 100 g of yarn;
• knitting needles No. 2.5;
• centimeter;
• needle.

We knit, guided by the following description:

1. Cast on 140 stitches, add a couple of hem stitches, after which you can start knitting with an elastic band.
2. Alternate a pair of front loops with a pair of purl loops.
3. Thus knit a total of six rows.
4. After that, continue knitting with the front stitch. The length of the product made according to this scheme should be only seventeen centimeters.
5. Then start decreasing, knitting a pair of loops at once in every third row.
6. Pull off the remaining loops, tighten tightly.

Carefully sew the finished product.

Knitted hat (video)

Double knitted hat with earflaps

An original, warm hat with ears will look great not only on boys. For young guys and even mature men, such a headdress will become the most favorite, because it looks good, and winter frosts are not terrible with it, which is the main advantage of earflaps.

Required materials and tools:

• 200 g of wool yarn;
• 200 g of acrylic;
• circular needles.

An original, warm hat with ears will look great not only on boys

How to knit a fashionable hat:

1. Dial 120 loops with acrylic threads, then knit just one row.
2. Immediately switch to wool yarn and knit another 80 rows following the pattern.
3. Exactly the same number of lines knit on the bottom.
4. After that, the loops need to be reduced, dividing all the loops into 26 parts, five loops each.
5. Move the even parts to one knitting needle, immediately move the non-black ones to the other.
6. First of all, start decreasing loops from the bottom bottom by knitting a pair of extreme facial ones together.
7. The remaining six loops are simply pulled off.
8. By analogy with the bottom bottom, make a decrease on the top.
9. Tighten both bottoms, as a result of which a crease should form.
10. Divide the circle into six parts, four of which will go to the back of the head and ears, and the remaining pair to the visor.
11. Immediately knit the back of the head and start knitting the ears.
12. Leave 25 loops on the ears, and thirty on the back of the head.
13. Cut off the auxiliary thread and insert the knitting needles into the loops that have appeared, knit only twenty lines of the ears, without knitting the back of the head and constantly not knitting a pair of loops in each row.
14. Knit until there are only four working loops left.
15. After that, add a couple of loops in each row.
16. Pick up thirty occipital loops and knit eighty stitches.
17. The visor is knitted by analogy with the ears, decreasing a couple of loops in each row.
18. When there are only 14 loops left, you need to add a pair of loops in each line.
19. Pick up all the loops of the inner part and knit 72 rows of the inner part, after which the loops close.

Cool hat for a guy for the winter with knitting needles

New, modern models of knitted hats will suit bold, self-confident guys. The most unusual youth hat is knitted according to a simple pattern. To connect it, no special knowledge and skills are simply needed.

Necessary tools and materials:

• 200 g of yarn;
• knitting needles number 5 on the fishing line.

How to knit:

1. First of all, dial 90 loops.
2. Raise eight centimeters by knitting with an elastic band, alternating a pair of facial and a pair of purl.
3. Then just knit about ten centimeters with front stitch.
4. After that, remove fifteen loops evenly in a circle.
5. Knit another ten centimeters in satin stitch.
6. Again reduce the number of loops by fifteen.
7. Each time, after knitting ten centimeters with a stitch, repeat the decrease.
8. Only when there are only thirty loops left, they need to be threaded and tightened.

At the end of the headdress, attach a pompom or make a brush.

Patterns for men's hats for beginners

Knitting men's hats is most often preferred with front stitch. Nevertheless, craftsmen are increasingly trying to make this wardrobe item more refined and original. A hat decorated with braids or geometric shapes looks beautiful.

To knit a pigtail pattern, do the following:

1. Knit all odd rows with 6 knit rows.
2. Even - purl.
3. Only on the seventh row, remove three loops on an additional knitting needle, knit three facial ones and also three facial ones from the auxiliary one.
4. The scheme includes only ten rows, which must be repeated until the desired length is reached.

A hat decorated with braids or geometric shapes looks beautiful

The classic checkerboard pattern is knitted according to the following pattern:

1. Cast on loops, the number of which should be a multiple of four and an additional two more for the edge.
2. Knit the first row with four knit and the same number of purl rows.
3. The second and all even rows are knitted in accordance with the pattern of the canvas.
4. In the third row, again make four facial and purl.
5. Fifth row - first four purl, and then the same number of front ones.

The seventh row is knitted according to the same principle.

Knitting a men's cap: a master class

For many years, the cap has been considered the most popular among both men and women. It is quite difficult to buy the perfect thing in the store, but to tie it is a matter of several hours.

Necessary tools and materials:

• 100 g of yarn;
• 60 g of hat gum;
• five knitting needles No. 6.5;
• hook number 6.5;
• needle.

For many years, the cap has been considered the most popular among both men and women.

Progress:

1. Crochet into a slip loop and pull eight loops out of it.
2. Transfer a pair of loops to the knitting needles. It is these loops that will always be front, leading.
3. Knit a circular line by adding loops in front of the leading ones.
4. The next row is also facial, but the loops are added after the leading ones.
5. After that, knit the even rows with the wrong ones, the odd ones with the front ones.
6. You need to add loops on the seventh, thirteenth, seventeenth, as well as the twenty-third and twenty-seventh lines.
7. After that, you need to make a reduction. In total, five loops must be removed from each knitting needle for seventeen rows.
8. Then take the hook and knit three lines of semi-columns behind the back wall of the loops.
9. Raise the loops for the future visor from the half-loops of the band (39 in total).
10. Alternate rows of purl and facial, adding loops only in the second case.

Connect the visor with the remaining open loops with a hook.

The most original models of men's hats

Classical headdresses have not surprised any man for a long time. But funny, unusual hats will cause them great delight. Even if they don’t wear such a product in everyday life, it will cheer you up and become an excellent addition to a carnival costume.

The most unusual ideas for knitted hats.

Feminine flared jackets, elegant men's coats, children's raincoats and cardigans came into fashion. Cute hats to complete the look. with patterns, pompoms or "ears".

Clothing stores offer many models of hats - men's, women's, children's. However, it is worth spending time and money to find an accessory that matches the overall look. Needlewomen can save money and at the same time knit suitable stylish hats for the whole family. The main thing is to understand all the intricacies of the circuit and understand the general principle of operation. How to knit a hat with knitting needles. You will find knitting patterns for women's, men's, children's hats with a description in this article.

We knit a hat with knitting needles for women and men

Before knitting, it is necessary to choose the right yarn and knitting needles. Yarn depends on the season and model. Winter hats are knitted from yarn with a high content of wool, spring - with acrylic. Bulk yarn is suitable for models with large patterns and coarse knitting. A thinner yarn is well suited for tight knitting with small patterns.

Hats are usually knitted on circular needles - so the product will turn out smooth, no seams. Elastic band for density is knitted on thin knitting needles. Turning to knitting the base, you need to change the knitting needles to thicker ones and add loops.

In addition, you will need markers to mark the beginning of the row and the loops needed when working, as well as a needle, a hook and an additional curved knitting needle for patterns in the form of a braid.

Before you choose and start knitting a suitable model, you need to understand a few general rules that will be needed when knitting any hat.

How to add loops on a hat with knitting needles

Usually the addition is made in the next row after the elastic, so that the product is held more freely (especially when knitting berets). Increases are made in 1-2 rows, depending on the model.

You can add loops in the middle of the row in different ways. The most convenient methods of increasing are from the previous row and with the help of a crochet.

From the previous row, you can make a loop from a broach, that is, a thread between two loops, or from a loop of the previous row. The broach is thrown onto the left knitting needle and knitted with the front - an additional loop is obtained.

If you pick up, pull out and knit the loop of the previous row with the left knitting needle, you will also get a new loop. This will turn out the most imperceptibly - in the general knitting it will be difficult to find places for an increase.

With the help of a yarn over, a loop is made on the front side: pick up the thread with the right knitting needle and continue knitting. In the next row, knit the added loop behind the back wall of the wrong side. Otherwise, the addition will stand out with a small hole between the threads.

Knitted knitted hat (garter stitch)

Beginners knit simple hats in stockinette stitch or garter stitch. These are the easiest ways to work.

The front surface involves alternating rows with front and back loops. The canvas on one side will have a smooth vertical pattern (front side), on the back - a pattern in the form of transverse waves (wrong side).

Garter stitch is performed exclusively with facial loops, regardless of the side. The result is a simple embossed pattern.

Note! The front surface tends to curl around the edges. To prevent this from happening, first knit an elastic band. Also, the edges can be “fixed” by crocheting them.

How to finish a hat with knitting needles

After the hat is knitted to the desired length, you need to start narrowing the crown. To do this, reduce a few loops in the following rows.
Decrease - knitting two loops together. As a rule, when knitting a hat, rows with decreases alternate with rows knitted according to the pattern. This reduces the number of loops through which reductions are made.

For example, first every 10 loops, then after 9, then after 8 and 7 loops. When no more than 20 loops remain, pull the thread through them and pull off. This completes the knitting of the hat.

Knitting patterns for hats: diagrams and description

There are a lot of knitting patterns. A variety of braids, braids, rhombuses, “knobs”, “leaves” look good on hats. Also, the main fabric of the hat can be knitted not only with satin stitch, but also with a certain pattern, for example, “rice” or “honeycombs”.

"Rice" - a simple pattern that makes the product airy and embossed. “Rice” knits not only hats, but also snoods. The pattern is well suited for both bulky yarn and fine yarn.

The principle of knitting is very simple: the front loop alternates with the wrong one. In the next row, knitting changes: the front is knitted on the wrong side, the wrong side is knitted on the front.

"Honeycombs" are knitted with a thread thrown over. To do this, you need to dial an even number of loops. Knit in the 1st row of the front loop, then throw a thread on the right knitting needle and remove the loop from the opposite knitting needle, repeat the rapport to the edge.

The second row is created as follows: purl, throw the yarn over on the right knitting needle, knit 2 loops, transfer, knit 2, etc. 3 row: throw on the thread, remove the loop, knit the front together with the yarn, repeat the rapport to the end. 4 row: 2 facial, transfer the yarn over, repeat again to the edge. 5 row: knit the thrown thread and the loop, remove the loop with the crochet, repeat. 6 knit as 2. From the 7th row, the repetition of rapport begins - 3-6 rows.

"Scythe" - the most common pattern for hats and the simplest especially for beginners. For him, you need to prepare an additional short knitting needle.

As an example, cast on 14 loops in the usual way and knit rapport:

• remove the edge;
• purl 2 loops;
• knit 8 facial;
• the remaining loops knit purl;
• repeat 1-4 points 3-4 times (the length of the braid depends on the quantity);
• repeat point 1-2;
• throw 4 loops on a short knitting needle and leave before knitting;
• knit 4 facial loops of the row;
• return the loops from the knitting needle to the left and knit them with facial ones (if convenient, you can knit immediately with an additional one);
• finish the row by tying the purl loops;
• repeat the rapport (points 1-9).

Note! The number of loops must be even so that you can evenly divide the loops into two parts.

The braids can be knitted in different lengths and widths, as well as tightly together or through purl loops, depending on the model and yarn. Thicker and thinner braids are knitted through 3-6 rows on 4-8 loops. Wide braids are best knitted through 10-15 rows on 10-14 loops.

There are many other basic knit patterns. When choosing a pattern, you need to pay attention to its density.: the denser the pattern, the better the warmth will be retained, which is important for winter hats. Summer and spring hats allow mesh or openwork patterns (“ladder”, “shells”, “peacock tail”, “leaves”, etc.).

How to knit a winter hat for women (with a description)

Winter hats are denser, softer and more voluminous than spring ones. For their knitting, yarn is required, which includes at least 50% wool (alpaca, merino, camel, sheep). To add volume to knitting, you can fold thin threads 2-4 times.

Knitted mohair takori hat (knitting pattern)

A takori-style hat can be considered a universal model, as it can be worn in different variations: as a stocking hat, with one or more lapels. Takori is a very soft and voluminous hat. This model is knitted quite simply with an English elastic band and will appeal to novice craftswomen.

To create a takori hat, you will need Angora yarn (100 g / 500 m), 4.5 mm circular knitting needles (can be knitted on two knitting needles), markers, and a large knitting needle.

The thread is folded in two(the beginning and end of the ball are connected) and 70 loops are cast on (head circumference 56-58 cm).

Knit rapport: throw a thread, remove the loop, facial, repeat. All even rows - yarn over and knit a loop behind it, throw on a thread, remove a loop, etc.

Alternating rows, knit to the desired length (about 32 cm), and then change to 1x1 elastic band: knit a loop with a crochet from the wrong side, 1 front and then in a circle. Subsequent rows (approximately 3 cm) are knitted according to the pattern.

Work through a decrease row, knitting together every 2 loops.

Cut the thread about 10 cm from the knitting needle and thread it through the needle. Pull off the loops and fasten the thread.

Hat with knitting lapel

Classic hat with lapel knitted with 1x1 or 2x2 ribbing (facial and purl). After 5-7 cm is knitted with an elastic band, it is necessary to change the knitting in a checkerboard pattern: knit the front loops with the wrong ones, and the wrong ones with the front ones. In this way, a line of inflection of the lapel will be outlined, along which it will be possible to bend the edge. Continue knitting with an elastic band for another 5-7 cm.

Important to remember! The elastic band made of soft yarn stretches well, so it is important to make it the size of the head or a little narrower.

When the elastic is completed, you can move on to the main part of the hat and knit it with the desired pattern.

Double hat with knitting needles

This is a warm hat with two layers. There are quite a few options. The easiest way is to knit in satin stitch on stocking and circular needles, starting from the crown. In fact, you should get a stocking closed on both sides.

Fold the thread into a ring and, inserting the knitting needles through it, cast on 12 loops, 3 loops on each knitting needle. You can dial in the usual way, but then you get a small hole in the middle. Knit a row of facial.

12 times add 8 loops in a row: 1 row - facial, increase, facial, increase, facial (so on each knitting needle). Subsequent even rows are facial. 3 row - front, increase, 3 front, increase, front, etc. (add on each knitting needle after the first and before the last loop). The result should be 4 wedges.

How 24 rows will be knitted, change the knitting needles to circular ones and start knitting with a satin stitch 122 rows, marking the wedges and the edge of the row with markers.

Decrease (marker guide) 12 times: 1 row - knit, remove, knit, throw the previously removed loop over it, knit to 3 extreme loops (to the marker), 2 together, knit, etc. There are 24 rows in total.

Tighten the last 12 loops with a working thread.

Knitted hat made of thick yarn

From thick yarn, simple hats with a simple pattern are knitted quite quickly. Skeins weighing 100 g and no more than 140 m long are considered thick yarn. Accordingly, large knitting needles from 8-10 mm will be needed, depending on the thickness of the thread.

Usually, 30-40 loops of thick yarn are cast on the knitting needles and knitted in a circle with a garter stitch, elastic band or satin stitch. Additions do not need to be made, reductions are made classic.

Knit a hat for spring with knitting needles for a woman - new models

In the spring, you can dream up and knit not only warm, but also beautiful models of hats.

Hat turban knitting

A simple turban is knitted with 1x1 English Rib in a single piece of fabric about 12x90 cm (should be a narrow scarf). Having connected the scarf to the desired length, close the loops in the usual way. Then the finished canvas is collected in a turban and sewn together.

Try on a scarf on your head, wrapping it in the form of a turban. The middle of the scarf is the back of the head, the two ends cross each other on the forehead and bend back. To understand exactly which segments need to be sewn, it is recommended to mark them with pins.

The edges are sewn through the side loops at the back and from the sides on the wrong side.

Important to remember! To correctly calculate the size of the cap, you need to knit a sample of 10 loops for 10 rows, wash, dry and measure.

Women's hat takes knitting needles with a description and diagrams

Knitting a beret from a hat is distinguished by mandatory increases in 1-2 rows after the elastic. This will help expand the knitting to the desired diameter.

The elastic band of the beret should fit snugly on the head. As a rule, it is knitted 1x1 or 2x2 and has a length of 2-7 cm. After 5-6 rows from the elastic, uniform reductions are made.

Hat with English ribbing (2x2) knitting needles

This is a fairly simple model, similar in execution to a takori hat.

You will need a relatively thin thread with an acrylic content, for example, Alize Lanagold yarn (100 g / 240 m), as well as 3.5 mm circular needles and a needle.

How to knit:

1. Cast on a multiple of 4 stitches.
2. Knit according to the principle of classic English gum, but knit 2 loops each: knit 2, double crochet 2, next row according to pattern, etc.
3. Having knitted to the desired length, go to the elastic band 1x1: knit front, 2 together with a crochet front, wrong side and further in a circle.
4. Knit the next rows according to the pattern(5-6 cm).
5. Make decreases as when knitting a takori hat.
6. Pass the cut thread through the needle and pull through all loops.

Hat with braids knitting needles (scheme)

There are many options for this model. In a simple, classic hat, braids of 4-6 loops are separated by 2-4 purl loops.

Cast on a multiple of 2 stitches on the needles and start knitting in a circle 2 knit, 2 purl (rib 2x2). After 5-7 cm of knitting, change the knitting needles to thicker ones, go to the smooth surface and add loops every 3 loops.

To knit rapport for a braid: knit 6 front loops, 3 - purl, 6 front, etc. After knitting 4 rows, knit a braid on the front loops, and then repeat the rapport from the beginning.

After knitting to the desired length, make decreases: knit every two loops together, then knit 2 rows according to the pattern, then decrease again, knit a row according to the pattern, 2 rows - decrease. Pull the last loops together.

If you alternate through an equal number of rows of a braid with a knitting needle behind and before knitting, you get a "braid". For example, one row - 120 loops, one braid consists of 12 loops, respectively, around the cap you get 10 wide braids.

10 rows are knitted with satin stitch, then a row with braids is made: remove 6 loops on the third knitting needle and remove for work, knit 6 loops of the row, and then loops from a short knitting needle. So the whole row is knitted. After the next 10 rows in stockinette stitch, the order changes: 6 loops on the auxiliary knitting needle remain before work and so on.

It's important to know! The braids slightly compress the diameter of the cap, so it is necessary to add a large number of loops in 1-2 rows (there may be 15-40 increments in total) so that the braid does not interfere with putting on and taking off the product. After knitting a series of “oblique”, it is necessary to measure the future hat: the pattern should not compress the head.

Knitting pattern for a Kubanka hat with knitting needles for women (with a description)

A Kubanka hat is a rather original model, distinguished by a rectangular shape.. The complexity of this model lies in the fact that when moving from the crown to the bottom of the cap, it is necessary to tie the roller.

For size 57, cast on 4 mm knitting needles 130 loops. Knit with an elastic band 1x1 for about 4-5 rows, and then, without adding loops, proceed to knitting the main part of the cap to the crown (you can make a suitable pattern).

Make a roller by knitting 8 rows for this with a 1x1 elastic band. It is necessary to connect the 1st and 8th row: pick up the loops from the first row of elastic and purl each loop of the 8th row.

Divide the number of loops into 7 parts, set markers - guidelines for decreases. Continue in stockinette stitch, dec 7 sts on each RS row (in purl without dec). The result should be 7 wedges. Pull the last loops with a thread.

How to knit a fashionable hat for a girl with knitting needles

As a rule, all hats are knitted according to the same principle. but each model has its own characteristics, which can cause difficulties when knitting.

Knitted hat with ears

A cute simple hat with ears is knitted in garter st in the round or like takori: English or classic ribbing, but does not close with reductions. Having connected the cap above the top of the head, it is necessary to close the loops in the usual way. The result is a pipe open on both sides.

Ears are made from the upper edge of the "pipe". To do this, you need to sew the top of the cap, starting from the center, from the wrong side (connect the wrong loops together). To make the ears stand out more clearly, you can sew the corners diagonally, separating the ears from the main part of the cap.

Beanie hat (stocking) with knitting needles: knitting pattern

This is a simple knitting pattern that even beginner needlewomen can handle. Usually "stocking" is knitted in garter stitch without patterns. This model differs from all the others in a rounded top and a rather large length (the top of the cap should fall off the head).

To knit this model, you will need thick yarn, for example, “Nako Jersey” (100 g / 74 m) or Trinity yarn “Melody” (100 g / 100 m), knitting needles 6-7 mm, needle.

A stocking hat is knitted in vertical and short rows.. To do this, you need to dial 45 loops on one knitting needle (along the length of the cap) and knit 40 loops with facial ones. The remaining 5 loops are not knitted and remain on the right needle.

Turn the work and knit in the opposite direction in garter stitch. In the 3rd row, knit 41 loops, leaving 4. In the 5th row, 42 loops are knitted, in 7 - 43 loops, in 9 - 44, in 11 - 45. From the 13th to the 22nd row, the front loops are knitted. Row 23 is knitted as 1 and so on (rows 1 to 22 are repeated). The result should be a wedge.

Note! The upper part of the beanie should be slightly narrower than the lower part due to the wedges.

Repeat knitting until the desired width is reached (5-7 wedges). After the last row, the working thread should be at the top (if this is not the case, knit another row). Close the loops with the wrong ones, cut the thread, leaving 15 cm. Pull the thread through the needle and sew the hat along (bottom-up). At the top, thread the needle into the purl loops in a circle and pull off.

Knitted pumpkin hat

The model has a pointed top. You can wear this hat with or without a lapel.

How to knit:

1. Cast on stitches to size.
2. Knit with a pattern like an elastic band from 2 facial and 3 purl.
3. Having knitted to the crown, make decreases in a circle on the wrong loops: 1 wrong side, 2 together, etc. (it will turn out a regular elastic band 2x2, knit about 7 cm according to this pattern).
4. Decrease on purl stitches (Row 1).
5. Knit a row according to the pattern (2 facial, 1 purl).
6. Pull the thread through the last loops and pull off.

Hat with gradient knitting needles

Hats with a gradient look unusual due to the smooth transition from one color to another. The secret of such knitting is that a second color is gradually added to a thread of one color.

In order for the transition to be smooth and not contrasting, it is necessary to prepare a thin thread and fold it 3-10 times, depending on the thickness. Having knitted the lower part of the cap, begin to gradually replace the threads with a different color: first change 1 thread, then 2, 3, and so on, until all the threads “change” color.

You need to mentally calculate when to change color. For example, if the working thread consists of 3 threads, then you need to mentally divide the hat into 4 parts: part is knitted in one color, part - with 1 thread of a different color, part - with 2 threads, part - in a different color.

Knitted pom-pom hat

The pompom beautifully complements the hat and can hide minor flaws on the top of the head. The simplest pompom can be made using cardboard "bagels" or a special circle.

Cut out 2 circles from cardboard with rounded holes in the middle - “bagels”. Cut the threads about 50 cm long and start wrapping them around the cardboard in a circle through the middle. For convenience, when the central hole is tightly wrapped with threads, you can use a needle.

Tightly wrapped threads are cut in a circle (the cut is made along the edge) to the cardboard. Slightly spread the cardboard rings to the sides so that you can conveniently pull and tie a skein of thread in the middle. After that, the rings are removed or cut, and the pompom affects the ball. Protruding threads, irregularities can be trimmed with scissors.

Men's hat with knitting needles (diagram with description)

There are models of hats that are more suitable for men than women, for example, a hat with earflaps or a hat with a helmet.

Hat with earflaps knitting

Hats with earflaps, depending on the thickness of the yarn and lining, can be both winter and demi-season. The main difficulty in the implementation of this model is knitting "ears". It is with them that knitting begins, so that the hat turns out to be smooth, without seams.

Interesting fact! The prototype of the usual hat with earflaps is the army hat of the White Army. Initially, it was exclusively a male headdress.

A simple one-sided hat with "ears" is knitted in garter stitch (can be knitted in stocking stitch). To work, you will need yarn of medium thickness (for example, 100 g / 120 m), circular and regular knitting needles 4-6 mm, a needle.

First cast on 12 sts on the needles and knit 8 rows, adding 1 st at the beginning of each row with the usual set. Knit 14 rows without increments. Cast on 8 sts at the beginning of the row and knit 20 rows. Similarly, tie the second "ear".

Cast on 22 stitches and knit a visor for 4 rows, adding 2 stitches at the beginning (30 stitches should be on the needle). Next, knit 24 rows without increments.

Connect the connected parts with the help of circular knitting needles, knitting the loops of one “ear”, then the loops of the visor and the loops of the second “ear”, close the knitting into a ring. Knit in the round for about 36 rows.

Dec evenly through a row of 7 loops. When 20 loops remain, decrease in each loop (10 loops remain). Pull the thread and pull.

Knitted helmet helmet

This model is knitted quite difficult, as it ties the head from the crown to the shoulders.

Usually, The hat is knitted from top to bottom.. First, loops are cast on 4 stocking needles (8-12 loops) and rows are knitted in a circle with increases at the beginning and at the end of each knitting needle. When the circle is large enough in diameter (over the head), you can switch to circular needles and knit further in a circle without increments to the forehead line.

Transfer the loops along the width of the face to a large pin and leave them, do not knit. Knit back and sides. When the length reaches the neck, pick up additional loops, close the circle and knit the neck. For a bib, cast on additional raglan loops on top, knit the required width.

Tie the front part with an elastic band and close the loops.

Hat sock knitting

Men's sock hat is knitted like a women's beanie hat, that is, you can start from the side and knit in short rows.

There is another option: knit in a circle with a dense elastic band 1x1, and then divide the loops in a row into 3-5 wedges, put markers and start making decreases through the row, focusing on the markers. Pull the remaining loops with a thread.

Hat made of thick yarn with knitting needles (knitting pattern)

From thick yarn for men, you can knit similar to female models. The only thing difference - drawing and pattern. For men, a more strict, geometrically correct pattern is suitable for a coat or jacket.

Most large-knit men's hats are knitted with elastic bands, garter stitch, satin stitch, vertical braids.

It's important to know! Woolen items must be washed only by hand at a water temperature of no more than 30 degrees, including when rinsing. Wool garments must not be twisted and can only be dried in a horizontal position. This will help to avoid deformation of the product.

Knitted children's hat

Children's hats often resemble bonnets, that is, they cover the entire back of the head and are tied under the chin. This is the main feature of such models. Otherwise, hats for children are knitted according to the same principle as for men and women.

Hat for a newborn with knitting needles

A simple cap-cap for a newborn of any gender is knitted with a satin stitch of acrylic or semi-woolen thin or medium yarn of about 100 g / 150 m.

On two knitting needles, the cap is knitted as follows:

• dial 42 loops;
• knit elastic band 2x2 for about 8 rows;
• go to the surface and knit 22-25 rows;
• close the loops in the usual way.
• As a result, fold the resulting rectangle of the canvas in half and sew the upper edges together through the edge loops. Sew a lace or rope of yarn to the bottom edges.

Knitted hats for a boy with knitting needles (with a description)

For boys, you can knit hats with earflaps with ties, helmets or regular stocking hats. The hat can be decorated not only with volumetric patterns, but also with a jacquard pattern.

Knitted hat for a girl

A simple hat for a girl is knitted in various patterns, both large and small viscous. The finished hat can be decorated with knitted flowers, beads or decorative buttons.

The easiest way to knit a hat with an elastic band and a garter stitch. To do this, you need a fairly thick yarn (100 g / 100 m) and 7 mm knitting needles.

Cast on 72 sts on circular needles and bind off. Knit rib 2x2 for about 15 rows. Next, go to the pattern from the alternation of 2 facial and 2 purl rows. Knit up to 29 rows.

From the 30th row, make decreases: in the 1st row - every 12 loops, in the 3rd row - after 11 loops, in the 5th - after 10 loops, etc. until 18 stitches remain. Pass the thread through the loops and pull off.

Owl hat for spring for a girl with knitting needles: a diagram with a description

A beautiful hat "Owl" with an ornament and "ears" is knitted on circular needles 4 mm with yarn 100 g / 130 m.

Cast on 64 sts and work 4 rows in stockinette stitch. Next, knit 2 rows according to the pattern: 26 wrong side, 12 front, 26 wrong side. Starting from the 7th row from the beginning, start knitting a pattern on 12 central loops (the rest of the loops are purl). Knit even (purl) rows according to the pattern.

In the first row, alternate knit 3 and yarn over in the middle. In the 3rd row, knit 3 loops, then throw on the thread, knit 9 with “rice”, throw on the thread, knit 3. 5 and 7 rows are knitted as 3, but in the middle, knit 11 and 13 loops, respectively, with “rice”. In 9-15 rows, knit 3 facial, 13 "rice", 1 knit.

17 and 19 rows - knit 3, decrease, 7 "rice" (in 19 - 5), decrease, knit 3.

In the 21st row, make a braid on 6 knitting needles, leave an additional one at work. Knit the front and again a braid on 6 loops.

In the 23rd, 25th and 27th rows, 13 loops are knitted with the stockinette stitch, the 29th row is knitted as 21.

31 (33) row - 3 (2) facial, 7 (9) purl, 3 (2) facial. 35 row - 1 facial, 11 purl, 1 facial.

From the 37th row, knit the next 9 rows with the wrong side, and then close the loops and decorate the protruding ears.

Note! For children's clothing, it is necessary to select hypoallergenic yarns specially designed for children. As a rule, such yarn contains acrylic, merino wool or fiber. These materials do not cause irritation, the clothes do not rub and softly adhere to the body.

How to knit a beautiful simple women's hat with knitting needles for beginners: a step by step guide

So, knitting any hat model can be divided into 5 main stages: elastic, increase, base, decrease, closure. Depending on the features of the models, some steps may be missing. For example, if you start knitting a hat with a 1x1 elastic band, and then switch to an English or patent elastic band, then you don’t need to make increments - knitting will turn out lush anyway.

You can also skip the first step, that is, start knitting immediately from the main pattern. If you immediately knit with satin stitch, then the edge will most likely twist into a small roller - you get an original lapel.

The general knitting pattern includes the following steps:

1. Dial according to the size of the head the number of loops on stocking or circular knitting needles from the calculation according to the preliminary sample.
2. Knit an elastic band 1x1 or 2x2 5-7 cm (sometimes you need more or less).
3. Change to larger needles (1-2 mm larger) and increase in the next row after the elastic (5-40 increases).
4. Knit in the round with the main pattern.
5. At the crown, begin to close knitting, evenly decreasing several loops in a row, alternate rows with decreases with regular rows according to the pattern.
6. Through the remaining 6-20 loops, pull the thread with a needle, pull off and fasten the thread at the crown.
7. Wash the finished product and dry.
8. If desired, decorate the hat with a pompom (ready-made or homemade).

How to crochet a hat

A simple crochet hat is knitted from the crown with single crochets with a gradual addition of loops. When the diameter of the head is reached, it is necessary to knit the hat to the end without increments.

Knitting hats with knitting needles: models and patterns for free

In the informative video below you can see how to knit a hat with knitting needles.

Knitting patterns for women's, men's, children's hats with a description are shown in detail in the next video clip. Look.

The presented models are a few of the many possible options for hats. Each needlewoman can come up with her own author's model, draw a diagram or combine two models into one. The main thing is to start knitting, and then the Internet, patience and acquired skill will tell you.

I would like to show you my latest work. I do not pretend to originality, because this is a classic, writes Lyudmila Shulga. Many have already knitted a men's hat "Zigzag Luck",

I also tied, son and husband, 2 blue. When choosing a model, they were categorical: this one! And I agree with them, this model is very beautiful. But, I'm not me if I don't tie my own way. I love double hats for winter, so these are also double.

I used Belarusian threads of 100g in bobbins, a large% of acrylic. In two threads (6 additions). Dark blue. It took about 220g for two caps. Needles number 3. Caps with a volume of 60 cm and a height of 22 cm.

I started knitting with 12 stitches cast on from a ring of thread. On 4 needles, I increased every second row by 2p (in the beginning and in the middle) up to 108p. This came out 12 increments or 24 rows. It turned out a smooth distribution of loops into 8 wedges. Next, front stitch. When the lining became 22 cm long, I made a series of out. fold loops. I didn't follow the description exactly. I opted for the easier option. The elastic was tied 1x1. When switching to the drawing, I simply added yarn over from the side where the stripe slopes (before or after the front one). The previous yarn was always knitted together with the front one. Tilt to the right - for the upper lobules, tilt to the left - for the lower ones (faces or faces crossed, to choose from). If all front loops are knitted crossed, then the strip is sharper. I have this and this.

Maybe it's easier for someone to knit according to the scheme. I'll show you my notes.

The pattern seemed very light, just tried to knit it tightly. In the photo I will show you it from the wrong side - the stripes are even and flat.

But I chose the front side. The pattern is very embossed. When light falls on the cap, the shadow favorably emphasizes the pattern.

After the stripes, I switched to a 1x1 rubber band. Closed on 6 wedges. Every second row at the beginning of 2p. together. When there are 10 (8) sts on 1 knitting needle, then 2 sts. together 2 times through the row and pulled off the remaining loops. Lining 8 wedges, crown 6 wedges. But at the top of the head, when pulled, both canvases lay very well on top of each other.

My husband and son loved it, and so did I. They look great, in my opinion.

My husband asked me to knit another black hat. I'll try to add a photo to this post later.

And for the test I will knit it according to option 2.

For those who do not like to start with a ring: Option 2
Crochet a chain of 108 +1 loop (to complete the circle). From it, dial loops with knitting needles and knit a couple of rows of facial ones. Then a row of purl and then a pattern. Close the hat loops.
Dissolve the chain, dial the opened loops on the knitting needles and knit the lining with the front stitch. Close in the same way as a hat.

Another men's knitted hat

Head circumference: about 56-61 cm.
The depth of the cap is about 21 cm.

Materials: HWS Markoma Pittsburgh yarn (40% wool, 60% polyacrylic, 188 m/100 g); knitting needles number 3.5 and 4.

Knitting density "Pattern" knitting needles 4: 21 p. x 25 p. = 10 x 10 cm.

Cast on 105 on needles 3.5. close in a circle, put a marker at the beginning of the circle.

Knit 6 rows with an elastic band: out. p., persons. p., 1 out. p., 1 person. *, repeat from * to * until the end of the circular row.

Change needles to number 4 and continue to knit with "Pattern":
1st-2nd rows: out. P.
3rd-5th rows:
Work in Pattern until total piece measures 14.5cm, ending with 2nd row.

Decrease:
1st p.:* 2 out. p., 3 persons. *, repeat from * to * until the end of the circle.
2nd p.:* 2 out. p., 1 person. p., 2 p. together front *, repeat from * to * until the end of the circle = 84 p.
3rd p.:* 2 out. p., 2 persons. *, repeat from * to * until the end of the circle.
4th and 5th p.: knit out. P.
6th p.:* 2 p. together purl, 2 persons. *, repeat from * to * until the end of the circle = 63 p.
7th p.:*1 out. p., 2 persons. *, repeat from * to * until the end of the circle.
8th p.:*1 out. p., 2 p. together front *, repeat from * to * until the end of the circle = 42 p.
9th and 10th p.: knit out. P.
11th p.:* 1 out. p., 5 persons. *, repeat from * to * until the end of the circle.
12th p.:*1 out. p., 2 p. together facial, 1 person. p., 2 p. together front *, repeat from * to * until the end of the circle = 28 p.
13th p.:*1 out. p., 3 persons. *, repeat from * to * until the end of the circle.
14th p.: Knit 2 sts together purl to end of row = 14 sts.
15th p.: knit out. P.
16th p.: knit 2 sts together front to the end of the row = 7 sts.
Cut the thread, pull through the remaining stitches and fasten off.

The cold season means the time to choose a headdress. Women have options for every taste, from scarves to fur headphones, but what about men? You can diversify the wardrobe of your brother, dad or other half with your own hands by tying a men's hat. To do this, just take knitting needles with threads, select a model and follow the description under the diagram.

In order for a man to like a hat, the following must be considered:

• Natural material is suitable for a hat, especially if the scalp is sensitive. Angora, cashmere, soft wool.
• The optimum knitting density should be determined. A properly knitted hat is dense, but does not cause discomfort and looks neat.
• The model must match the time of year. A pom pom hat is good for winter, in spring or autumn it is better to choose a beanie hat.
• The color should be combined with the color scheme and style of the man's outerwear.

Knitting a simple men's hat with front stitch with an elastic band

For beginners, it is better to choose a simple model in order to master the knitting steps and not be disappointed in the process.

Yarn selection

It must be remembered that the hat will be worn by a man who may not like the thread with a pile or sparkles. In the description of most knitting patterns, the threads recommended for use and their thickness are indicated. If the store does not have the yarn you need, you can pick up a similar one in terms of characteristics. The composition is also important.

Threads with a predominant content of natural fibers retain the original appearance of the product longer. Often natural and artificial threads are mixed, obtaining a favorable combination of qualities. The choice of material also depends on the season. In winter, you should give preference to angora, goat down, mohair.

Needle selection

The main thing that they pay attention to is the size, shape and material of the knitting needles. The choice is also determined by the style of knitting. Cloth is knitted with paired closed knitting needles, and the fabric and products without a seam are knitted in circular knitting needles. A set of double knitting needles is used for seamless circular knitting of small items.

The size of the tools determines the density of knitting and depends on the thickness of the yarn and the knitting characteristics of a particular person. Recommendations for selection are indicated on the packaging of threads. It should be borne in mind that thick knitting needles will make the loops larger and looser, while thin knitting needles will be denser and tighter. The material and texture of the needles depends on the yarn. For sliding threads, you should choose rough, for fleecy - smoother.

Required measurements

Hat measurements must be taken directly from the head. You should not measure an existing headgear, the elasticity of the material may vary. You will need 2 main measurements: girth and height. The girth line is drawn above the eyebrows and a convex point on the back of the head. Height - the distance from the lobe to the parietal part.

The measuring tape should fit snugly around the head. Based on the characteristics of the model, other measurements may be needed. For a tight-fitting hat - from the crown to the end point of the future product from all sides, for a cap or earflaps - face circumference.

Set of loops

To calculate the loops for the side, you need to tie the sample, stretch it a little, count the number per 1 cm and multiply by the head volume obtained during the measurements. For patterns that tend to stretch, you can remove 2 cm. The amount for the main type of knitting is also calculated, without subtracting the length for stretching.

There will be more loops. Extra loops are added immediately after the elastic, knitting 2 loops from one through the same gap. The method of casting loops determines the appearance of the edge of the fabric and its elasticity. It depends on the chosen pattern and model.

Scroll:

The main part of the hat

The front surface is a simple type of knitting, the fabric is even and dense. The essence of the process is the alternation of rows of facial and purl loops. When knitting facial loops, the thread is located behind the canvas. The thread is picked up and pulled out through the loop. For the purl loop, the thread is located in front of the product and is captured from right to left. The first loop is not knitted, the last one is knitted.

Knit to the crown, 16 - 18 cm, then begin to decrease the loops.

The final stage of knitting

The number of loops is halved, knitting in pairs. It is possible to decrease through the row according to the pattern 5 stitch, 2 together, reducing the number of stitches. When there are no more than 12 loops left, the thread is cut off, pulled through them and a bartack is made from the inside.

Knitting fashionable men's hats - description and diagrams

For lovers of the original, knitting hats for men with descriptions and patterns can be a way to test your abilities. However, it should be remembered that an unusual Viking or knight's hat consists of several elements.

In some cases, it is necessary to divide the fabric into parts and knit them according to different patterns., increasing or decreasing loops, knit slits for the eyes or mouth, use yarn of various colors or textures.

Unusual fantasy threads will also help to make the product funny and eye-catching. A thread with knots, pompoms, curly, boucle, grass, thanks to its texture, will add individuality even to an ordinary model. You can pick up sectional dyeing threads. Those who prefer materials with a traditional look may like bulky yarn, interspersed tweed, lace yarn.

Hat with ear flaps

The original hat with earflaps is suitable for men of any age.

To link such a model, you will need:

You can knit with a garter stitch:

1. Cast on 12 stitches
2. Knit 8 rows, adding a loop.
3. Run 14 rows.
4. Add 8 loops to the beginning, knit 20 rows. Knit the second piece in the same way.
5. For a visor, 22 loops knit 4 rows, in each gaining 2 loops. Knit another 24 rows.
6. Connect on circular needles, tie the number of rows in height.
7. Evenly reduce the number of loops to 10, tighten.

With lapels

Combined with a scarf, the lapel hat looks stylish and will complement any look. Knitted with stocking needles.

Scheme:

1. Calculate the initial number of loops, evenly distribute on the knitting needles.
2. Elastic band 2 by 2 tie 25 cm.
3. Knit a row of purl loops together, follow the pattern for 2 rows.
4. Work a row with facial loops together, 2 of the following in the figure.
5. Knit the remaining rows in pairs until 8 stitches remain.
6. Pass the thread through the last loops, fasten off.
7. Turn up the edge of the hat.

beanie hat

A simple and fashionable beanie or stocking cap is worn close to the head, while the baggy top is tucked in or left hanging down. You can use garter stitch or make patterns. The beanie is easy to knit on knitting needles in a circle.

knitting:

1. Take measurements and calculate the loops.
2. Knit 5 cm with an elastic band 1 on 1.
3. Dec 30 sts evenly in one row.
4. Knit the front surface for another 15 cm.
5. Dec 8 sts evenly per round until less than 25 sts remain.
6. Knit all loops in pairs.
7. Cut yarn and pull through the last loops. Pin.

good luck zigzag

A knitted hat for a man with a zigzag pattern is more difficult, you must carefully study the description and diagram. The pattern is more embossed on the inside. Materials: 100 g yarn, circular needles.

knitting:

1. Loops are calculated so that the number is a multiple of six. Before counting, the sample should be washed, the pattern is stretched.
2. Cast on loops with any elastic set.
3. First, knit with a patent rubber band. 1 row alternate crochet, untied loop and purl.
4. Connect the front loop and yarn over, then the removed loop and yarn over.
5. Do not knit a loop, yarn over, next purl with yarn over.
6. Repeat alternating rows 2 and 3 until a height of 4 cm.
7. To create a “zigzag of luck” pattern, knit 7 rows according to the scheme: yarn over, knitted front yarn over and loop, purl.
8. In the transition row, yarn over before purl.
9. For the next 7 rows, do not knit the loop, knit the yarn over, pass the removed loop under the yarn, yarn over and purl.
10. Transition: yarn over, remove the loop, knit the yarn over with the front one, pull the removed loop through the yarn over, knit the wrong one.
11. Repeat the steps of the zigzag pattern.
12. The remaining height is knitted with an elastic band 1 on 1 of the crossed loops. The front loop is knitted behind the front wall, throwing a working thread over the knitting needle. In the same sector, products are decreasing. To do this, knitting is divided into 6 parts, at the beginning of each, 3 loops are knitted together through a row.
13. When there are 24 stitches left, knit them in pairs.
14. Knit another row of knit stitches and complete the hat.

Patterns for men's hats

Zigzag pattern

A simple and original, geometric zigzag pattern will allow a plain hat to stand out among the abundance of models that fit tightly on the head.

The pattern is created by yarn overs and alternating knitting patterns.

Rhombus Pattern

Relief is achieved by cross loops. A multiple of 10 is dialed, 2 is added. The beginning of the row is 4 front loops. Next, cross 3 loops to the left: transfer 2 to different additional knitting needles, place the knitting needles on different sides of the work, knit the third, second, then the first loops in order. Run 7 facial, repeat.

From 3 rows, at the beginning, reduce the number of front ones by 1 to cross loops, then increase. After the front to the right, cross 2 loops, knitting the front loop around the first, the knitting needle in front of the first, then the first in the same way, without removing the second. Remove both. Front, then 2 crossed to the right in the same way, only the knitting needle behind the first loop. Repeat the pattern, reducing the number of faces between the diamonds by 2.

Alternate rows with purl rows. It turns out a stylish drawing without frills.

pearl pattern

Similar to pebbles, the pattern is also called "rice". A voluminous, rich, but at the same time simple drawing can be created even by a beginner. To do this, you need to knit facial and purl, changing the sequence of the previous row.

Checkerboard pattern

A knitted chess pattern can be schematically described as an alternation of squares. A man will like a set of a hat with a scarf. To achieve the pattern, alternate the sequence of front and back loops.
For example, with a 6x6 elastic band, work 6 rows, starting with the front ones, then change the order. The size of the squares can be changed by choosing the required number of loops and rows.

Crochet

You can knit a hat for a man not only with knitting needles, but also with a crochet. The process may seem more complicated, however, following the description and understanding the scheme, you can create a beautiful product with a soul.

Hook selection

The right tool is the key to beautiful work. Hooks are long and short, depending on the type of knitting. You can find hooks made of metal, plastic, combined. The most versatile and most comfortable hooks are made of steel. They do not smear the yarn, do not break, are presented in any size. The hook should be matched to the threads so that the product is neat and even.

Thin tools make knitting tighter and vice versa. The sharp head can cling and separate the fibers of the yarn.

One of the selection methods is according to the table according to the length of the yarn. The shorter the thread per 100 g, the larger the hook size. You can pick up the hook manually: you need to pull the thread in the recess of the tool head. The thread should fit in the beard, leaving no space and not protruding.

Yarn selection

Crochet threads are selected based on the type of product and pattern. It is better to knit a sweater from combined thin and elastic threads to avoid an allergic reaction, and for accessories you can choose bright synthetic threads. Yarn should be uniform in thickness and strong.

Simple crochet hat patterns

A simple crochet pattern for a men's hat is an elastic band knitted in a circle. The pattern is obtained by alternating convex and simple embossed double crochets. First you need to connect several rows and determine the number of columns. Then make a ring and knit a hat in a circle.

You can crochet a beanie hat. In this case, the width of the canvas is calculated by the height of the product, and the length by the volume of the head. The fabric is sewn. Such a hat should be knitted from thin threads, the pattern should be made dense so that it does not lose its shape.

Half column

The number of loops is calculated from the sample. The set for the canvas is made with air loops.
In the first sliding loop, you need to stretch the thread from the ball, get a new loop. For a half-column without a crochet, the thread is captured through 2 loops at once.

column

Single crochet is also knitted on the basis of air loops. Crochet to grab 3 loops. The thread is first passed through the 2 extreme, and then again through the remaining 2 loops.

Double crochet

For a double crochet, throw a working thread on the hook, insert the hook into the fourth loop.
Pull out to make 3 loops. Knit the resulting loops in stages of 2.

Final stage

To reduce the volume of the cap, it is necessary to determine the side and the pattern along which the reduction is made. A simple option is to knit 2 loops at a time anywhere in the row. You can also increase or decrease the height by changing the types of columns. For example, from half-columns to half-columns with crochets and so on.

When the canvas is ready, the first and last row must be connected, collect the loops of the hole formed on top of the thread and pull it off. Knitting a hat with knitting needles or crocheting will bring a lot of pleasure if you understand the pattern and clearly follow the description. All difficulties will pay off when the man, for whom the craftswoman tried, accepts the gift and wears it with pleasure.

Video: knitting hats for men with descriptions and patterns

How to knit a men's hat, see the video clip:

Knitting a men's hat, master class: