Handicraft is a world of wonders and flights of fancy. There are many techniques and ways to create a masterpiece. Each master has his own favorite type of activity in this area, but there are hardly those who are indifferent to wool felting. Cute little animals, felted from soft material, instantly captivate hearts. They also inspire you to try your hand at working with wool and beyond.

For dry felting, natural unspun alpaca, camel or llama wool is used. Due to the special structure of the animal's hair, it becomes tangled, forming so-called tangles. It is this property that allows the scraps to be given a certain shape.

Felting, as felting is often called, is an interweaving of wool fibers to create a dense fabric structure. There are several felting techniques: dry felting, wet felting, nun-felt method and felting of knitted fabrics.

The most popular today is the dry method. It is quite simple and allows even novice hand makers to create real masterpieces. You don't need complicated tools for the job. The master's arsenal is simple and laconic.

Equipment for work

To dry felt wool, a beginner will only need a few tools. It is important to take into account that the work tool is very sharp, so it is better for children under 12 years of age to do needlework under adult supervision.

What you will need:

Scissors and other cutting objects are not needed for work. The wool is pliable, so it can be torn off by hand. In addition, a cut tuft loses its structure, while a torn tuft keeps the hairs intact.

Since the felting needle is quite dangerous, it is better to choose a radio as background noise when working. Being distracted by TV can cause you to cut your hands. Wounds caused by metal barbs take a very long time to heal.

Master class for beginners

The wool felting technique allows you to create real masterpieces. These are toys, brooches, and even appliqués on clothes. But in order to learn how to create beautiful things, you need to learn the basic points of working with a needle.

Before starting work, you should find a comfortable place with a flat surface. A desk or kitchen table is ideal.

It is recommended to learn how to felt wool by starting with simple shapes. For example, from a ball:

To get ahead of the readiness of the figure, press on it with your fingers. If the lump does not change its shape due to this, then it is felted enough.

To felt a flat part, a ball of wool is flattened on foam rubber and rolled onto a sponge, periodically turning it over to the other side. Felting flat elements can be compared to drawing on a sheet of paper: you can apply a design only on the front and back of it.

To give a flat element a certain shape, you can use paper patterns, to which the workpiece is periodically tried on during work.

Woolly good monster

Having become familiar with the dry felting technique, hand makers will definitely try to make felt toys with their own hands. For beginners, step-by-step master classes may seem simple, but working with a needle requires experience and dexterity, so you should understand that the first creations of a newly minted master will be far from masterpieces, but you should not give up. It’s better to try to dump a hero who will only benefit from absurdity. For example, a cute monster.

Any creative task begins with creating a sketch. The future hero is drawn on a piece of paper, observing approximate proportions, but without going into small details.

When the sketch is ready, it is divided into main parts. In the case of a monster, the process is divided into creating the torso, limbs and decoration.

In the proposed example, the head and body of the monster smoothly flow into each other, so there is no point in laying them separately. If the sketch requires a clear and graceful neck, you can break up the diagram differently.

Torso and head

Work on the monster begins with the largest detail. To do this, pinch off a large ball of wool and roll it into a ball. You shouldn’t make your debut work too miniature. Small parts are difficult to work with.

So, the body is rolled up. Now its outlines are beginning to form. Sticking a needle in, they make a small pear. To do this, as the ball narrows, more and more injections are made.

At the stage of forming the body, a flat surface is not as important as the density of the element. It is important to knock down the tight pear-shaped lump, in which there will be no cavities.

To form a small belly for the monster, a ball with fluffy edges is made from a small tuft of wool of the same color. Using a needle, roll it onto the pear, paying attention to the edges. The contour of the belly should not stand out.

To level the surface of the future body, the thinnest needles are used.

Preparation of symmetrical limbs

The limbs of the future hero must be the same, so they are rolled simultaneously from equal lumps of material. If you completely form one leg, it will be difficult to find the right amount of wool for the second.

Felt two identical pieces of wool. Periodically, the workpieces are turned over and compared in size.

The upper parts of the arms will be attached to the body, so there is no need to knock down the hair in these places. It should be fluffy and fleecy. The shape of the hands can be any. The master class suggests making long paws with large palms. The limbs are made from large locks of wool so that they are elastic and not “dried.”

After the outline is formed, the fingers are drawn. To do this, longitudinal grooves are made along the edges of the workpiece.

All small details are worked out at the preparation stage. Forming fingers and other indentations on the arms attached to the body will be very difficult. Therefore, before fitting the limbs, they are detailed as much as possible.

The finished arms and legs should be fluffy on top and dense at the ends. Then they begin to roll them to the body. To do this, the fluffy fur of the monster’s hands is placed in the right place and they begin to insert the needle, piercing it approximately to the middle of the body.

Gradually, the edges of the limbs will begin to merge with the main part. There should be no sharp transitions or joints.

Design of the character's face

To complete the craft, you need to choose a facial expression for it. The monster's face in the instructions is kind and mischievous. It was performed by attaching woolen eyes to the hero’s head, and also by embroidering the mouth with thread. You can use other techniques, as well as combine them.

Step-by-step design of the toy's face:

You can give any accessories to the monster. They are made from the same wool or other materials. How the craft will be decorated depends only on the imagination of the needlewoman.

If inaccuracies were made during work, you can hide them with a toy outfit. The same felting from wool will help you create a wardrobe for your character. The clothing is formed from thin sheets of felted wool. By pinning it over the entire surface, you can dress the toy in pants or a sweater. A crocheted suit will also work as clothing.

A toy with a secret filling

From felt you can create not only cute animals, but also other interesting crafts. But some toys are too bulky, so it will be difficult to make them from wool alone. Even if the needlewoman acquires a sufficient amount of material, it is possible that the needle simply will not pierce large parts to the required depth.

Therefore, to create three-dimensional crafts, the filling method is used. As a filler, you can use synthetic winterizer or foam blanks. Soft padding can be used to form any curves, but foam elements can only be wrapped in a woolen shell.

Working with fillers is as simple as regular dry felting. With the help of a needle, the pile becomes tangled, penetrating into the workpiece. The finished felted product resembles a whole woolen craft and does not give away its secret filling. At the same time, the weight of the toy will be small.

Wool in combination with polystyrene foam is often used to make Christmas tree decorations and other round things. You can purchase the blank at a craft store. The craftswoman will be able to decorate the finished craft using any technology - beads, patterns, rhinestones or artificial snow.

Felting wool will help you make unique Easter eggs and a felt chicken for the holiday. The nest for the composition can be made from real straw.

Felting is an activity that wins hearts. Therefore, you need to be extremely careful, because the first toy on the shelf is very insidious, because it will definitely “call” its comrades with it, and the hand-maker will wake up, having already created a whole zoo of cute woolen animals. And dry felting ideas for beginners will help him with this.

In everyday life, this type of needlework is also called felting or felting. Unique crafts made from felted wool are very popular, and buyers are very willing to purchase such crafts. Felting wool toys with your own hands is possible even for novice craftswomen and allows you to create unique products with your own hands. Before starting work, it is recommended to familiarize yourself with master classes on felting lessons for beginners.

In contact with

What is needed for creativity

To make products by felting, special attention should be paid to the quality of the purchased wool and tools. For creativity you need purchase natural wool, which can be bought in all specialized stores for creativity.

In most cases, coarse camel or sheep wool is used to make toys by felting. In stores, such wool is called sliver - combed wool of a sheep without awns. Feather is used as a material for stuffing toys, and merino is used to decorate the product.

The felting technique involves the use of special tools, which can have different thicknesses and different cross-sectional shapes.

How to felt: basic techniques

Using the felting technique, unique handmade products, toys, accessories, and clothing can be made. Today there are several popular felting techniques. A detailed study of the master classes will allow you to make any level of complexity.

The following main techniques can be distinguished:

• dry felting;
• wet felting;
• felting using a washing machine.

How to dry felting

Dry felting is the technique of entangling wool fibers together, resulting in felt. The following items are required for work:

• unspun wool, for which the use of carding is recommended;
• special needles with notches in the form of triangles or stars;
• a working surface, which can be a small piece of foam rubber during dry felting.

The manufacturing process includes stages of sequential application of wool fibers to give the item the required shapes and sizes. In some cases, as As a base for the product, a synthetic padding polyester can be used, on top of which wool fibers are applied.

When working with needles, you must be careful and careful, as these instruments are very sharp and can cause injury. The creation process begins with the use of a thick needle, followed by the use of a thin needle for more precise work. When working, the needle should always be positioned perpendicular to the product being manufactured.

The following are produced using the dry felting technique:

• three-dimensional crafts in the form of key chains, badges, toys;
• accessories in the form of wallets, straps;
• items of clothing, for example, hats, coats, felt boots.

How to wet felting

The wet felting technique involves working with wool on gauze and film using a soap solution or liquid soap. When using regular soap the solution is prepared as follows:

• a piece of soap is ground on a grater;
• the resulting shavings are poured with two liters of hot water and mixed well;
• after two hours the solution should thicken and can be used for work.

It should be noted that the concentration of soap in the solution must be high, otherwise the wool fibers will not connect with each other and the craft will not work.

The essence of felting is by rubbing the material manually in different directions. The manufacturing process involves the following steps:

• an oilcloth is spread on a flat surface, on which gauze is spread;
• the base is laid out, the main background and design elements are made;
• after laying out the fibers, place a cloth on top, generously moistened with soapy water;
• After a certain time, excess liquid is removed using napkins.

An important point is that the fibers are laid out crosswise or in strips. At the same time, there should be no holes or gaps in the canvas, and each layer should lie perpendicularly with the same thickness.

How to roll in the washing machine

This felting technique is considered the most a simple way to create items from wool. To work you must have the following items:

• dense form for rolling;
• durable nylon tights;
• wool;
• washing machine.

The prepared workpiece is placed in a washing bag and loaded into the washing machine. When washing, a small amount of washing powder is used, and washing should be done on a wash cycle without soaking and drying. The optimal temperature is considered to be 50 0 C. The finished felted base is removed from the washing machine and after complete drying it can be used for creativity.

Felting wool: toys for beginners

Beginning craftswomen are recommended to begin learning the felting technique with a master class on making felt toys of the simplest models, which will allow them to learn the basics of creating products using this technique and avoid unnecessary waste and damage to materials. Using the felting technique you can make a wide variety of toys. Bulk felted toys are environmentally friendly for children, so making them using this technique is considered an ideal option for creating a children's toy with your own hands.

Master class: felting a panda bear using the dry felting technique for beginners

Manufacturing process necessary start with preparing the materials and tools necessary for work:

• wool of black and white or other desired colors;
• special needles for felting;
• eye beads;
• glue for attaching eyes.

To prevent scratching by needles, it is recommended to protect the work surface. For convenience, it is recommended to use foam rubber, on which basic manipulations with wool and needles are performed.

The manufacturing process is as follows:

If desired, the toy can be decorated with other elements in the form of a creature on the head, imitation beads on the neck and other accessories.

Master class: voluminous felted hare

Cute felted bunnies can, depending on their size, be used as a decorative pillow or as a children's toy. The technique of dry and wet felting is used in production. Color and size of the finished toy determined by the master himself depending on his own desires and preferences.

The following tools and materials are required for work:

For the process of creating a toy, you need to choose a flat surface to work on. When working, a fairly large amount of water is used, so it is recommended to cover the surface with film beforehand.

The manufacturing process includes the stage of creating a blank and the stage of filling the base with padding polyester to give the toy the required volume. It should be noted that when using the wet felting technique, the size of the product decreases as it dries, therefore, taking this feature into account, the pattern should be made larger than the planned size of the final product.

Creating the base:

After this, it is necessary to repeat the cycle of turning the workpiece over with sequential application of dense layers of wool fibers. The total number of turns should be from 6 to 8 times. During manufacturing, you can add a few specks of a different color to give the future toy a more interesting appearance. It should be noted that during the process of applying layers, the fabric base must be inside the workpiece.

After laying the main layers You can start felting:

Adding volume:

• using wooden sticks, push the workpiece apart so that the toy can be filled with padding polyester;
• fill the internal space of the toy with padding polyester to give the desired volume;
• close the lower incision with wool fibers or using a special needle.

The final step will be the creation of eyes and decoration. The eyes can be felted from contrasting wool fibers colors or glue special ready-made parts in the form of button eyes.

The very ancient technique of felting wool (folding or felting) has received a second life in our time. With this simple technology you can create a lot of useful and cute things. The easiest way to understand the process is with an example. Felting toys is a good opportunity to understand the process. There are several different techniques. Let's consider dry and wet felting of a toy.

The word “dry” means that no water will be used in the work. Unlike other types of folding, unwetted wool is used here. This type of needlework is worth using if you need to get bulky things.

To obtain a very large volume, use a base made of padding polyester, foam rubber or something similar of any size and drape it. Gradually cover the entire surface of the blank with scraps of raw material. At the same time (at the same time) they make it denser and smoother with the help of needles.

Necessary materials and some dry felting techniques

For dry felting (felting), unspun wool and special needles are used. Needles differ from ordinary sewing needles in the presence of barbs at the end. These notches are what tangle the hairs. The result is felt.

Natural wool color palette:

It must be borne in mind that if used incorrectly, needles often break. The larger the needle number, the thinner it is. If during the work you can see that holes remain, then you need to take a thinner needle. Beginners usually use needles with a triangle or an asterisk at the end. In the process of improvement, each master chooses needles in accordance with his experience and preferences. These instruments can come in diamond, tristar and crown shapes. They can be cone-shaped or cylindrical. There are other options, but they are rarely used in practice. If you use several needles at once, you will increase the speed of work. But a special holder is required. It can be for a different number of needles (starting from one needle).If you don’t have this device, you can use an ordinary cork. Stick the needle into the product strictly vertically (perpendicular to the product).

Needles for needlework

If you decide to use felting for your work, it is worth preparing other devices. A comb is useful for separating strands of wool. A powder brush will be needed to fluff it up. In the future, to speed up felting work, you can try using a carder for work. It can be used to quickly mix and comb wool scraps. Since needles can damage your fingers, it is better to use thimbles for work.

You will also need to put something under the product while felting. If this is not done, the needles will break on a hard surface. You need to take a brush, a foam sponge, hard felt or polyethylene foam to line the workpiece.

Felting master class part 1

Felting master class part 2

Making a toy using the dry felting method

To make a toy with your own hands, you will most likely need: scissors, a glue gun (or just glue), molds for boning (usually they are made of foam rubber), sewing needles, for flexible products you need a wire on which the felt is rolled well. Let's try to felt, for example, a mouse.

A sliver is good for the base of the product. This is combed sheep wool (without awns). You can try working with camel or dog hair.

It is clear that the felt toy will turn out to be the same color as the wool chosen for the craft. We select the material of the desired color (or several colors).

We start dry felting from wool, both toys and any other crafts, in the same way. You can create different things, but the actions will be the same

The steps in this process are as follows:

• We tear off the required amount of wool.
• Roll it with your hands into a ball or cylinder (or other desired shape).
• By sticking the needle into the workpiece, we fasten the product throughout its entire volume.
• Rotate the product so as to evenly compact the product and level it.

First, the body of the mouse (cylinder) is made. It's grey. We compact it. Let's highlight the animal's belly, for example, in white. To do this, roll a small piece of white wool in the right place. We felt the head in the same way, only we rolled it into a ball. Now let's make the nose. To do this, roll a small cone with your hands. Having compacted it, we roll it onto the ball. We also create ears. The head is ready. Let's select the eye sockets. We stick the needle in the right places until two indentations are formed. We moisten the beads (or buttons) with glue and (using tweezers) glue them into the eye sockets. You can glue a bead onto the mouse's nose. If you need antennae, you can make them from fishing line or thin wire. Now you need chenille wire. It is used to make legs, arms and a tail. Wrap the wire in wool. Let's roll it. We attach it to the body. The mouse is ready. Using these techniques, it is not very difficult to achieve results if desired.

Playing a mouse

Wet felting

As can be seen from this phrase, water will be used in the work. We must remember that woolen items shrink when wet. Using this method it will be about twenty percent. So when making patterns you need to increase them by the appropriate amount.

Toy patterns:

Beginning of work

To make a toy using the wet folding method, of course you will need water (hot). It is worth immediately noting that this method can be used to make toys and other crafts that are flat (one-dimensional) or hollow inside (such as puppets).

By the way, the cavity of the finished product can be filled (for example, with towing) and you will get a voluminous item. You will need soap. If you use ordinary soap (you can use baby soap), then you first need to grate it and soak it in hot water. Liquid soap can be poured directly onto a wet workpiece. Since you will have to work with wet material, you need to cover a flat surface with oilcloth. We put pimply polyethylene on top. The pattern should definitely be waterproof (thick polyethylene will do).

Felt koto - slippers

How does the wet felting process work?

Having prepared the wool of the desired colors in the required quantity, we will proceed directly to work. To make a toy, we will create a pattern (remember about shrinkage).

• Place the pattern on the prepared surface.
• Cover it with pieces of wool. Lay it lengthwise and crosswise, so that the strands overlap each other. We make sure there are no bald spots. The dry wool blank should be about the size of a finger (in thickness).
• Wet it generously with warm soapy water. If we use liquid soap, then pour soap on top and hot water on top.
• Smooth with circular movements (approximately 100 strokes). Where you feel a depression, add some wool there. If the material extends beyond the template, wrap it inside.
• We cover the semi-finished product with nylon fabric (or a bamboo mat, some use another sheet of pimply polyethylene). We wrap the product and roll it on the table (another 100 times). You can squeeze out a little excess water first.
• The workpiece made in this way is flat and monochromatic.

• How to make a double (with a cavity inside) craft out of it? To do this, we put a template on top of it (it can be the same) and start wet felting from wool again. In this case, it is necessary to weld the two workpieces together in those places where this is required. If you need to highlight some places on the craft with other colors, then add wool where needed for felting the desired colors. To prevent the colors from being washed out, cover the rest of the surface (for example, with a piece of polyethylene). It is possible to make separate felted parts and then felt them onto the main product.
• If the toy is ready, you need to wash it from soap several times in cold water.
• Dry the wool toy on a flat surface at room temperature.
• We stuff the product (if necessary) with wool fringe or padding polyester.
• Ready.

Felting toys is a creative process. If you show your imagination, you will get truly wonderful things that will delight others.

Dry felting is significantly different from wet felting. But this technique allows you to create three-dimensional products, in particular, toys, figurines, and dolls. A special needle is used here. She pokes the wool many times until it forms a tight, cohesive material. Crafts made by dry felting are soft, voluminous and very beautiful.

Dry felting wool toys: master class

We offer you a master class for beginners on how to make a kitten.

Necessary materials

To make a cute kitten, in addition to wool, you will need:

1. Needles for felting.
2. Sintepon for internal filling.
3. Threads.
4. For the eyes, polymer clay.
5. Acrylic paints, brush, pastel.
6. Foam sponge or brush for the substrate.

We start to wallow

1) From padding polyester we form an egg-shaped base of the cat using a gypsy needle.

2) Having previously fluffed the wool, we place it on the base and roll it with a thick needle, wire or toothpick, sticking it as deep as possible. The wool is then pulled to the middle of the workpiece, compacted there, and left fluffy on top.

3) Paws. We fold them carefully to achieve the desired density, but leave one edge unprocessed for later attaching them to the body. To do this, we lean the end with loose hair against the body. Add another piece of wool in this place to improve grip. We give the legs the necessary bends and, holding them with our hands, secure them with a needle.

4) Muzzle. We add fur under the eyes and form recesses for the eye sockets, literally pushing the fur inside.

5) Now we will make a triangular platform for the nose, and two small balls will form the cheeks of the future kitten. They are located just below the spout.

6) Chin.

7) For the feet of the paws, add a little wool.

8) Using a needle No. 38, we begin “grinding.” The master class on dry felting toys includes a special technique. It consists in the fact that each area that can no longer be processed is pierced many, many times.

9) All that remains is to felt the tail. Like the paws, we leave the wool on one side unfelted. Giving a beautiful bend, before attaching the tail to the body, it must be carefully “polished”.

10) In the place where the tail rests on the body, you need to pierce this place many times, at the same time forming a butt.

11) We make whites for the eyes from polymer clay, dry them, and glue them with “Moment.”

12) Clearly trim the “smile” line. We roll a small flagellum to the bridge of the nose and form wrinkles.

13) Now we make a small triangle of wool in a contrasting color and attach it to the previously prepared flat area.

14) Making the kitten’s nostrils.

15) On a sponge we place two scraps of wool for the ears, turning them over from time to time.

16) On the bottom side we leave a place for rolling, the remaining edges are carefully felted with a needle, placing the ears between the fingers.

17) Then we roll these ears to the head and make bends.

18) We do the final “grinding”. We tint the kitten and paint the eyes with acrylic paints. We coat them with varnish on top.

This cute little toy kitten will bring a lot of joy to both children and adults.

As can be seen from the above, the dry felting technique for beginning needlewomen is not very complicated, it is enjoyable and brings aesthetic pleasure.

Video on the topic of the article

Felting is working with natural unspun wool. Felting allows you to create exclusive crafts - souvenirs, jewelry, toys... There is a dry and wet felting method. The dry method is used to create voluminous things, and the wet method is used for flat ones.

For dry felting, unspun wool and special needles are used. The work process is carried out in this way: a piece of wool is torn off, given the desired shape, then the wool fibers are tangled by piercing a large number of needles. Beginners need foam rubber for convenience.

Wet felting technique

For wet felting, unspun wool and a soap solution are used. The work process is carried out in this way: pieces of wool are torn off, the desired shape is laid out on a flat surface and a warm soapy solution is soaked through the mesh. Wool fibers are matted (glued) together to form a fabric product.

Modern needlewomen have learned to combine dry and wet felting. Thanks to this method, you can create original crafts, simplify your work and save time.

You will need: unspun wool of beige or gray (primary color), orange or blue (for gloves) and brown or white (for felt boots), black beads, needles for felting, a simple pencil, a needle and thick thread, scissors, if desired - thin needles for knitting and orange or blue yarn for a scarf.

Master Class

1. Roll the beige wool into an L-shape, then felt it by piercing it with a needle.
2. Add wool to the cheek area and felt well.
3. Pass a needle with a thick thread through the neck in place of the eye, then string a bead, thread the needle into the other eye hole, string the bead, bring the needle out and secure it in the neck area.
   
   
4. Draw a nose and mouth with a simple pencil.
5. Roll the body into a teardrop shape, then felt with a thick needle.
6. Roll up the sheep's feet and felt them, leaving the ends loose (not felted).
7. Form felt boots from brown wool, felt them with a thick, then thin needle and felt the needle to the legs of the sheep.
   
   
8. Use a needle to press the legs to the body of the sheep.
9. Felt the wool around the tummy and thighs.
10. Felt the arms in the same way as the legs, only slightly smaller.
11. Form mittens from orange wool and felt them with a thin needle to your hands.
    
    
12. Place your hands on the lamb's body.
13. Form the ears into a triangular shape from beige wool, felt them, leaving the tip loose, and felt them to the head.
14. Knit a 15 cm scarf with thin needles using 7 loops or decorate the toy to your taste.

The sheep using the dry felting technique is ready! I recommend watching this video!

You will need: light-colored wool yarn, unspun wool, liquid soap, bead thread, felting needle (38 stars), warm water, terry towel, gypsy needle.

Master Class

1. Roll the yarn into 8 beads of the desired size.
2. Wrap the beads tightly with wool so that there are no gaps.
   
   
3. Felt the wool with a needle around the perimeter of each bead.
4. Moisten the bead with warm water, drop some liquid soap on it and roll it, wetting it periodically. When the top layer sets, increase the temperature of the water and continue felting until it becomes dense and hard. Felt all the beads in this way.
   
   
5. Rinse the beads and squeeze them out with your hands.
6. Roll the beads in a terry towel, removing excess moisture, then send them to dry on a radiator or in a warm place.
   
   
7. Prepare your gypsy needle and bead thread, then string the wool beads.

Beads using the mixed felting technique are ready! I recommend watching this video!

You will need: foam rubber, scissors, unspun wool in beige, red, brown, white and green, felting needles, a brush with hard bristles.

Master Class

The house using the dry felting technique is ready! I recommend watching this video!

Flower using wet felting technique

You will need: unspun wool for felting, combed Merino ribbon in purple, white, green, light green and yellow, film with pimples, hot water, soap, medium felting needle, bamboo mat, sponge, mosquito net or organza, scissors, sheet of paper, compass.

Master Class

1. Draw a circle with a diameter of 18 cm on the sheet.
2. Cover the work surface on top of the sheet with the circle with oilcloth with pimples.
   
   
3. Separate the pieces of purple wool with smooth movements and lay them out in a circle in 5 layers, overlapping each other.
4. Lay out strands of white wool and turn the workpiece over.
5. Lay out strands of green wool, sprinkle with hot (not boiling water) water and cover with a net so that the wool is well saturated with water.
   
   
6. Twist yellow wool for the stamens.
7. Form a leaf from green and light green wool.
8. Form a stem from green and light green wool, sprinkle with hot (not boiling water) water, leaving a dry 4 cm tip.
   
   
9. Lather your hands and roll the stem on a bamboo mat without touching the dry tip.
10. Roll the stamens into flagella with soapy hands on a bamboo mat.
11. Place the leaf blank under the mesh next to the flower and sprinkle with hot water.
12. Felt the flower and leaf (smooth the wool in a random direction) with soapy wet hands on both sides.
    
    
13. Cut a small hole in the center of the flower and insert the stamens.
14. Apply the dry part of the stem to the center of the flower and apply soapy water.
15. Roll the leaf onto the stem and pierce with a needle the junction of the stem with the leaf and the stem with the flower and stamens.
    
    
16. Continue felting the flower with wet, soapy hands on the bamboo mat in different directions, creating the desired shape.
17. Rinse the flower in cold water when the flower size decreases.
18. Make 6 cuts along the edges of the flower, forming the petals.
    
    
19. Felt the cut areas by wetting the workpiece and rubbing it with soap.
20. Rinse in warm water, squeeze, straighten and dry.