Funny house slippers are knitted with knitting needles and crocheted details are used for decoration. These indoor shoes will keep your feet warm both in autumn and winter.

Size 35-36
For knitting you will need: yarn (50% wool, 50% acrylic, 300 m/100 g) - 60 g dark brown, Carolina yarn (100% acrylic, 438 m/100 g) - leftover black yarn “Grass” (100% acrylic) - remains of light brown and dark brown colors, knitting needles No. 2.5, hook No. 2.75, padding polyester.
Garter stitch: knit. and out. rows - only faces. loops.
Rib 1x1: knit knit 1 alternately. p. and 1 p. P.

Knitting density: 18 sts x 30 rows in garter stitch = 10 x 10 cm.
How to knit slippers with knitting needles. Description of work and knitting patterns.

Start knitting from the sole. On the knitting needles with a dark brown thread in 2 additions, cast on 26 stitches and knit in garter stitch, adding on both sides in each 2nd row 6 times x 1 stitch = 38 stitches. Then knit 4 rows without adding, then decrease on both sides sides in every 2nd row 6 times x 1 p. = 26 p. Next, knit the upper part with knitting needles. To do this, cast on an additional 7 stitches on the knitting needle (continuation of the sole), turn the work. Knit the resulting 33 stitches, at the end of the row add another 1 stitch. Then from this edge add in every 2nd row another 5 times x 1 stitch (like on the sole of a slipper). Knit 12 rows straight. Then cast off 20 stitches from the heel side and knit the remaining stitches with garter stitch needles for another 6 rows straight. Then start decreasing from the toe side in every 2nd row 6 times x 1 stitch. After that, from the heel side, cast on 20 stitches again and knit another 12 rows with a 1x1 elastic band. Close the loops. Make a seam. Ears: Using dark brown “Grass” yarn, crochet the slippers in 5 rows of st. b/n. In the next row, after knitting the side part and reaching the fold line, add 1 brown thread and knit the eyelet using non-woven stitches according to the pattern. After knitting 10 rows with half-stitches, return to the front of the product and knit 3 tbsp. b/n and make the second eye in the same way. Then tie the ears and side part with 1 row of stitches. non-woven thread “Grass” of light brown color.

Muzzle: using Carolina thread in 2 folds, cast on 16 stitches, knit 2 rows straight with garter stitch needles. Then increase on both sides in every 2nd row 2 times x 1 p. = 20 p. Knit 18 rows without adding, then decrease on both sides in every 2nd row 4 times x 1 p. Knit another 18 rows straight and close the loops. Tie the part around the entire perimeter 1 next to the st. b/n. Then knit another 1 row of st. b/n, skipping every 2nd st. the previous row so that the muzzle tightens.

Spout: using black thread in 2 additions, cast on a chain of 3 air. p., close it in a ring. Knit 6 tbsp. b/n in the ring. Next, knit in a circle with single stitches, evenly adding 6 tbsp. in every row. When you get a circle with a diameter of 3 cm, pull the part along the edges, stuffing it with padding polyester.

Assembling the parts of knitted slippers: sew the muzzle with the narrow part between the ears, lightly filling it with synthetic padding. Also fill the wide part with padding polyester and sew it on. Sew the nose onto the muzzle. Sew or glue the eyes.
Source
Based on materials from the magazine "Knitting is fashionable and simple. We knit for children" 2013
Published by Galina Pykhtina on the Mirtesen Skillful Hands website.

DOGGY SLIPPERS. Size of knitted slippers: 35-36 For knitting you will need: yarn (50% wool, 50% acrylic, 300 m/100 g) - 60 g dark brown, Carolina yarn (100% acrylic, 438 m/100 g ) - remains of black color, yarn "Grass" (100% acrylic) - remains of light brown and dark brown colors, knitting needles No. 2.5, hook No. 2.75, padding polyester. Garter stitch: knit. and out. rows - only faces. loops. Rib 1x1: knit knit 1 alternately. p. and 1 p. p. Knitting density: 18 p. x 30 rows in garter stitch = 10 x 10 cm. How to knit slippers with knitting needles. Start knitting from the sole. On the knitting needles with a dark brown thread in 2 additions, cast on 26 stitches and knit in garter stitch, adding on both sides in each 2nd row 6 times x 1 stitch = 38 stitches. Then knit 4 rows without adding, then decrease on both sides sides in every 2nd row 6 times x 1 p. = 26 p. Next, knit the upper part with knitting needles. To do this, cast on an additional 7 stitches on the knitting needle (continuation of the sole), turn the work. Knit the resulting 33 stitches, at the end of the row add another 1 stitch. Then from this edge add in every 2nd row another 5 times x 1 stitch (like on the sole of a slipper). Knit 12 rows straight. Then cast off 20 stitches from the heel side and knit the remaining stitches with garter stitch needles for another 6 rows straight. Then start decreasing from the toe side in every 2nd row 6 times x 1 stitch. After that, from the heel side, cast on 20 stitches again and knit another 12 rows with a 1x1 elastic band. Close the loops. Make a seam. Ears: Using dark brown “Grass” yarn, crochet the slippers in 5 rows of st. b/n. In the next row, after knitting the side part and reaching the fold line, add 1 brown thread and knit the eyelet using non-woven stitches according to the pattern. After knitting 10 rows in half-stitches, return to the front of the product and knit 3 tbsp. b/n and make the second eye in the same way. Then tie the ears and side part with 1 row of stitches. non-woven thread “Grass” of light brown color. Muzzle: using Carolina thread in 2 folds, cast on 16 stitches, knit 2 rows straight with garter stitch needles. Then increase on both sides in every 2nd row 2 times x 1 p. = 20 p. Knit 18 rows without adding, then decrease on both sides in every 2nd row 4 times x 1 p. Knit another 18 rows straight and close the loops. Tie the part around the entire perimeter 1 next to the st. b/n. Then knit another 1 row of st. b/n, skipping every 2nd st. the previous row so that the muzzle tightens. Spout: using black thread in 2 additions, cast on a chain of 3 air. p., close it in a ring. Knit 6 tbsp. b/n in the ring. Next, knit in a circle with single stitches, evenly adding 6 tbsp. in every row. When you get a circle with a diameter of 3 cm, pull the part along the edges, stuffing it with padding polyester. Assembling the parts of knitted slippers: sew the muzzle with the narrow part between the ears, lightly filling it with synthetic padding. Also fill the wide part with padding polyester and sew it on. Sew the nose onto the muzzle. Sew or glue the eyes.

Funny pets knitted slippers, crocheted parts are used for finishing. These indoor shoes will keep your feet warm both in autumn and winter.

Size 35-36
For knitting you will need: yarn (50% wool, 50% acrylic, 300 m/100 g) - 60 g dark brown, "Carolina" yarn (100% acrylic, 438 m/100 g) - leftover black, "Travka" yarn (100 % acrylic) - remains of light brown and dark brown colors, knitting needles No. 2.5, hook No. 2.75, padding polyester.
Garter stitch: persons and out. rows - only faces. loops.
Rib 1x1: knit knit 1 alternately. p. and 1 p. P.

Knitting density: 18 sts x 30 rows in garter stitch = 10 x 10 cm.
How to knit slippers with knitting needles. Description of work and knitting patterns.

Start knitting with soles. On the knitting needles with a dark brown thread in 2 additions, cast on 26 stitches and knit in garter stitch, adding on both sides in each 2nd row 6 times x 1 stitch = 38 stitches. Then knit 4 rows without adding, then decrease on both sides sides in every 2nd row 6 times x 1 p. = 26 p. Next, knit the upper part with knitting needles. To do this, cast on an additional 7 stitches on the knitting needle (continuation of the sole), turn the work. Knit the resulting 33 stitches, at the end of the row add another 1 stitch. Then from this edge add in every 2nd row another 5 times x 1 stitch (like on the sole of a slipper). Knit 12 rows straight. Then cast off 20 stitches from the heel side and knit the remaining stitches with garter stitch needles for another 6 rows straight. Then start decreasing from the toe side in every 2nd row 6 times x 1 stitch. After that, from the heel side, cast on 20 stitches again and knit another 12 rows with a 1x1 elastic band. Close the loops. Make a seam.

Ears: Using dark brown “Grass” yarn, crochet the slippers in 5 rows of st. b/n. In the next row, after knitting the side part and reaching the fold line, add 1 brown thread and knit the eyelet using non-woven stitches according to the pattern. After knitting 10 rows in half-stitches, return to the front of the product and knit 3 tbsp. b/n and make the second eye in the same way. Then tie the ears and side part with 1 row of stitches. non-woven thread “Grass” of light brown color.

Muzzle: Using Carolina thread in 2 folds, cast on 16 stitches, knit 2 rows straight with garter stitch needles. Then increase on both sides in every 2nd row 2 times x 1 p. = 20 p. Knit 18 rows without adding, then decrease on both sides in every 2nd row 4 times x 1 p. Knit another 18 rows straight and close the loops. Tie the part around the entire perimeter 1 next to the st. b/n. Then knit another 1 row of st. b/n, skipping every 2nd st. the previous row so that the muzzle tightens.

Spout: Using black thread in 2 additions, cast on a chain of 3 air. p., close it in a ring. Knit 6 tbsp. b/n in the ring. Next, knit in a circle with single stitches, evenly adding 6 tbsp. in every row. When you get a circle with a diameter of 3 cm, pull the part along the edges, stuffing it with padding polyester.

Assembling parts of knitted slippers: Sew the muzzle with the narrow part between the ears, lightly filling it with padding poly. Also fill the wide part with padding polyester and sew it on. Sew the nose onto the muzzle. Sew or glue the eyes.

Based on materials from the magazine "Knitting is fashionable and simple. We knit for children" 2013

Good afternoon friends!

Olga Andreeva seems to have become interested in knitting slippers and sent a second wonderful work - funny children's knitted slippers with knitting needles in the shape of dogs. Well, such charmers! There is also a description of knitting.

Hello, readers of the blog “The Comfort and Warmth of My Home”!

I already wrote about myself in a previous article. Today I want to present another work for the competition. These are children's slippers knitted with knitting needles.

My nephew recently arrived with his little son Levushka. He is 1.5 years old. My sister, Leva’s grandmother, just met her grandson, because they live in Moscow.

I wanted to knit something for the baby. From the remnants of melange yarn, which I used to knit slippers and socks for the competition, I knitted ordinary socks. And then I decided to knit some funny slippers in the shape of dogs. Now the baby is running around the room in them.

Materials for slippers

The slippers are knitted with two types of blue thread: wool with acrylic and grass.

I knitted with wool in one thread, and with grass in 2, because these threads were very thin.

I used 2.5 mm circular needles and double needles to knit the nose.

Knitting pattern: garter and stocking stitches.

For decoration, we bought ready-made eyes, and the dog’s nose was embroidered with black thread.

The slippers are sewn on the back.

Knitting children's slippers with knitting needles in the shape of dogs

We start knitting children's slippers from the top. We take the necessary measurements and calculate the number of loops based on the sample.

Top

On circular knitting needles I cast on 44 stitches with blue wool thread and knitted 3 rows in garter stitch.

Then I changed the thread to grass and knitted 8 rows with it in the same pattern.

Spout

We move on to knitting the nose of the slipper. We select 12 central loops for the nose. There are 16 loops on each side.

We knit the first 16 loops, then continue to knit only the central 12 loops with stocking needles, and leave the side 16 loops on one and the other side on ring knitting needles.

We knit the toe of the slipper in stocking stitch to the required length, up to the little finger. I got 22 rows.

Then we decrease the loops. We knit two stitches together at the beginning and end of the row. In the purl row we do not decrease, we simply knit according to the pattern. So we cut 3 times until there are 6 loops left on the stocking needle. We cut the thread, then tie it to the main thread.

Sides

We cast on 14 loops on both sides from the outer side loops from the nose of the slipper. And starting from where we stopped when we started knitting the nose, we continue to knit on ring needles in the round using garter stitch. We tie the threads that we cut when knitting the nose to the blue thread.

We will end up with 66 loops on our knitting needles (6-point, 14 loops on both sides that we cast on, and 16 that remained on the ring knitting needles).

We knit 10 rows in garter stitch with blue wool thread. Then 4 rows - with grass and 2 more rows - again with blue woolen thread.

Sole

Let's move on to knitting the sole of the slipper. There are 66 loops on the knitting needles. We leave 8 medium ones for the sole.

We knit 36 ​​loops with knit stitches, then knit 2 together.

Unfold the knitting. Remove 1 loop, knit 6, then purl 2 together, unfold the knitting again.

So we knit the middle loops of the sole in garter stitch, knitting 2 knit stitches together in the front row and 2 purl stitches together at the end of the purl row. In this way, we reduce the side loops until there are 4 loops left on each side on both sides.

The length of the sole is approximately 15 cm. I made them a little larger, because a child’s foot grows very quickly.

Heel

Tied the sole. We have 8 loops on the central knitting needle, and 4 on the side knitting needles. We begin to knit the heel. Remove the first stitch from the central part and knit with knit stitches.

Two loops out of 8 remain on the central knitting needle; we knit them and the first loop from the side knitting needle together.

Unfold the knitting. We remove the first loop, knit it with the front ones, again 2 loops remain on the central knitting needle, we knit them and the first one from the side on the wrong side together with the wrong side.

We repeat again - unfold and knit, knitting 3 together at the end of the front side. front, purl - 3 together purl.

Knit like this until only 1 loop remains on the knitting needle.

We tighten the thread, leave it longer and sew the back of the slipper with a needle.

The slippers are knitted. Now we will decorate them.

Decoration of children's knitted slippers

First we will knit the ears for the dog. We have double ones. The lower part is knitted with blue wool thread, the upper part is knitted with grass.

We cast on 5 loops per ear and knit 14 rows in garter stitch. Then we knit 2 stitches together on both sides. There are 3 loops left on the knitting needles, close them off.

We knitted 2 ears with wool thread and 2 grass for each slipper. We sew pairs of ears together and sew them on the sides of the slippers.

On the front we embroider the nose of our dog with black thread. My daughter Ksyusha did this and helped a little. We attach the eyes with hot glue.