Making a snowman yourself is very easy without spending a lot of money.

To do this you will need the following materials:

• Threads;
• pearl barley or rice;
• beads, rhinestones, buttons, ribbon.

Take the sock and cut off the nose part. We put it aside.

Take a large part of the sock (with the heel) and tie one side with thread. You need to tie it tightly so that there is no hole left.

Pour cereal into a sock. It is better to take pearl barley or rice, because they are light and will not show through a white sock. We fall asleep almost to the very end, leaving a little fabric so that you can tie it with thread.

We tie a sock. The result is a white ball or oval.

Place the sock on one of the sides with a tied bun (preferably the one that is thicker). We begin to wrap the filled sock with thread just above the middle. The bottom part should be larger than the top.

Let's start decorating. We tie a ribbon between the balls, which are separated by threads. The ribbon is the snowman's scarf.

We take rhinestones or beads and glue them like eyes, a nose and a mouth. It is better to glue it with adhesive moment.

Liquid glue will not work; it gets absorbed into the sock and the beads fall off.

We take the cut off nose part of the sock and make a bend. We put it on the snowman's head. It turns out to be a hat.

Two beautiful snowmen come out of a pair of socks. They turn out very cute and lift your spirits. They will be a wonderful decoration for the holiday.

Other options for a DIY snowman made from socks

How to make a very beautiful snowman from stockings

With the help of your skillful hands, another snowman will settle in your house.

Materials and tools:

• Two foam balls of the same size;
• thin red felt;
• green fuzzy wire;
• foam material, such as foam for the stand;
• orange polymer clay (plasticine is also possible);
• red threads;
• scissors;
• glue gun;
• acrylic paints or gouache - red and black;
• brush;
• stationery knife.

We take two prepared balls and cut off small segments from them.

We divide one of the cut segments into 4 parts with a knife. We leave the middle ones, from which we will make handles.

From packaging material, polystyrene foam or polystyrene foam, we cut out a circle with a slightly larger diameter than our balls.

Carefully cut a small depression in the middle.

Lubricate with glue and install the first ball with the cut side up.

On the first ball, smearing it with glue, place the second one - cut side down.

Then cut out a rectangle from felt. The larger side of this rectangle should be equal to the circumference of our ball, and the smaller side should be equal to its diameter - this will be the cap. A long strip of felt is a scarf. Mittens - 4 parts.

We glue mittens to the handles.

We grease the felt for the hat with glue and apply it to the head.

We attach the handles.

Lubricate the scarf with glue and wrap it around the neck area.

We make a carrot out of plastic or plasticine and place it in place of the nose.

Use a red thread to tighten the cap, cut the ends of the scarf and the top of the cap.

We twist a Christmas tree from green fleecy wire.

We draw the snowman's eyes, mouth, blush on the cheeks, and buttons. We give a Christmas tree in your hand.
Our craft is ready!

DIY napkin stand with snowman

The New Year's holiday table is never complete without a hot dish. In order not to spoil a beautiful tablecloth, housewives often use special stands. But they can be made so that their appearance is in harmony with the holiday atmosphere. For example, knit them in the form of a snowman.

To knit a stand in the form of a Christmas tree toy, we will need any medium-thick yarn of any dark color (otherwise the applique will blend in with the background color), hook No. 1, white denim yarn, pieces of glue-based felt, a decorative bow, two beads, scissors .

We collect 4 air loops from dark yarn and close them into a ring with a connecting loop.

We knit the first row with single crochet stitches, inserting the tool into the hole of the ring. The number of stitches does not matter, the main thing is that the knitting does not bend. We also close the row with a connecting loop.

We also knit the next rows with single crochets. To prevent the knitting from curling at the edges, it is necessary to periodically make additions. We make additions in each row, but their number will vary depending on the numbering of the row. For example, in the second row we make 3-4 additions, in the third – 4-5 and so on. The number of increases may vary depending on the yarn, so the main thing is to ensure that the knitting does not curl and the increases are at an equal distance from each other.

The total number of rows for the base is 5-6. You can make more if you want the diameter of the stand to be larger.

In the next row, use a thread or a yellow marker to mark 4 points that are equidistant from each other. In this row we also knit single crochets, but at the points marked for us we knit three single crochets in one loop.

We knit the third row in the same way as the second.

After this we will tie the edge of the stand. To do this, we attach white yarn to the edge of the circle and knit the following pattern: 3 chain loops for lifting, 1 double crochet in the same loop, 3 chain loops, “picot” from these three chain loops, 2 double crochets in the same loop.

We repeat the pattern to the end of the row, only instead of 3 chain loops we knit a double crochet.

After this, we knit single crochets in the same way as we did when knitting the warp.

Cut out a “bucket” and a “carrot” from pieces of felt with adhesive backing.

We form eyes from beads, sew all the details and glue them to the base so that we get a snowman.

The “Snowman” hot pot is ready. The author of the master class is Elena Sharygina.

In winter, in snowy weather, children enjoy rolling snowballs and then making large and small snowmen from them. It immediately becomes clear to everyone that the basis of such a craft should be balls of different sizes. If you transfer this object to paper, be sure to show the round parts. They can be easily drawn with a compass. But what to do if the child is still small, he does not know how to handle a compass at all, and this sharp object is dangerous for him.

Another thing is toilet paper tubes. The rolls make quite decent crafts. Naturally, the paper on top is gray, but it can be covered with a white sheet. And you can even not use a gray fragment, but immediately make a thin long cylinder from white cardboard.

Thus, to show a snowman figurine, it is not necessary to cut out 2-3 circles. You can make a white cylinder and add distinctive details - a long carrot nose, skis, a broom. All this develops the child’s imagination and makes it possible to use non-standard materials and techniques to perform unusual crafts.

What to prepare to make a paper snowman:

• white paper and a roll of toilet paper for the body;
• orange paper for the spout;
• yellow and blue paper for headphones;
• black paper for skis;
• branches and tape for a broom;
• scissors;
• glue;
• red and black pens or markers.

Make a white cylinder - the basis of the whole craft. This will be a complete blank for the entire torso of the snowman. Either stick a white sheet onto the gray surface of the roll, or use white cardstock. Cut a strip of cardboard, roll it into a cylinder, and secure it with glue or a stapler. This way, the central part will be single, smooth and even, and not consisting of separate circles.

Make an orange nose in the shape of a cone, it will look like a carrot. Take a circle and make a cut along the radius. Hold with your fingers, twist to get the desired part, glue the ends of the cone. Draw round eyes with pupils on a white roll with a black pen, and a wide mouth with a red pen. Now there is a face on the cylinder.

Lubricate the base of the cone generously with glue. Glue the nose to the face.

Cut out blanks from prepared paper: black skis, a blue stripe and 2 yellow circles for headphones. Gather several short branches into a bundle and wrap the base with tape. The result will be an imitation of a broom, which is usually inserted into the hands of snowmen who are sculpted from snow on the street.

Glue a blue stripe at the top of the cylinder on the sides. Mask the ends of the stripes with yellow circles on top. The headphones are ready.

Glue the broom to the side using tape or a piece of paper. The figurine seems to be holding her in his hands.

Now place the entire structure on the skis. To glue them, use additional pieces of paper or tape.

The little paper snowman is ready. He rushes through the snowdrifts and celebrates the New Year. You can also entrust him with a letter for Santa Claus, which he will definitely deliver to the recipient. In winter we see a snowman in the yard, and we will see another small copy on the shelf after repeating this lesson.

This children's craft in the form of a snowman is completed without much effort, so it is perfect for the youngest children. Everyone knows the sculpting technique, because creating snowmen and snowmen is a favorite activity for all children in winter. There are a lot of snowdrifts outside during the cold season, so you’re tempted to go out into the yard, go sledding, and play in the snow. And at home no one forbids you to engage in interesting creativity.

In this lesson we will not only create an interesting figurine, but also decorate it at our own discretion, because plasticine allows you to realize any fantasy. After reading this master class, you will not need to look for new ideas for winter creativity; you will definitely love this kind of work.

To create a plasticine snowman craft, prepare:

• white plasticine;
• black, orange, red, blue, brown plasticine, but in small quantities;
• match and toothpick.

Select a white block from the set. It is exactly what resembles real snow – just as pliable, easily deformed into clumps. But plasticine is not cold at all, it will never melt, it can even be moistened with water. Of course, you won’t be able to play snowballs, but you can do something unusual.

Cut off 2 pieces, leave a little for the limbs (no one forbids making arms and legs for our snowman). Roll 2 balls for the head and body. These two parts will be enough to form the figure.

Stretch your torso slightly. Prepare a match for connection. This small detail will not only hold it together, but also make the figure movable.

Connect the figurine's head and body. Using the head of a match, press the eyes onto the ball-head. Instead of the usual bucket that children can put on the snowman's head in the yard, make other accessories. Let these be bright headphones.

Make a thin blue strip and glue it onto your head in a half-arc. Glue red cakes on the sides of the strip. These headphones are a winter fashion trend. And they also suit a snowman very well.

Fill the eyes pressed out by the match head with black plasticine. Glue the nose. It can be either a carrot or a wide bright ball. Make a mouth and blush. The cheerful face of the charming snowman is ready, he smiles at us, and therefore we need to immediately move on to further stages.

Glue bright red buttons onto the front part of the body and press them down with the tip of a toothpick. After that, use a toothpick to create a broom. The snowman usually stands at a post in the yard, with a broom inserted into his branch hands.

Glue several brown threads to one end of the stick and press it around the circumference with your fingers. Make oblong arms and legs. It's better if they are small. The main part of the craft is the torso and head.

The snowman turned out to be mischievous and festive, bright and noticeable. Place the broom in his hands and sit him under the small tabletop Christmas tree. The New Year is rushing to visit us, with such a sentry we will not miss the most interesting things, we will definitely prepare for the holiday and have fun.

Nature tirelessly imagines in winter and sends us tens, hundreds, thousands of snowflakes from above. Scientists who have examined them under a microscope say they are all different. Of course, it’s hard for us to believe this, because snowflakes are so small, so delicate, they instantly melt from a light touch or breath.

And we, too, can experiment and create something unique; we don’t even need to look at snowflakes under a microscope for a long time and look for certain distinctive features. We have at our disposal all kinds of materials for creativity: plasticine, paper, threads, felt, beads and much more.

Start with what you understand, the easiest. Children love plasticine very much, and therefore they will gladly agree to make some kind of craft from it, especially if it is.

To create a snowflake like the one suggested here, prepare:

• plasticine;
• stack.

How to make an elegant snowflake

The proposed snowflake is creative, not similar to the white and blue crafts that have become traditional for us. Why not use brown color, it is so similar to chocolate, which children love, which will definitely be in gifts on New Year's Eve, on the branches of the Christmas tree, on the festive table.

Is it possible to refuse the sweetest delicacy? However, we can add additional white elements; moreover, we can also time the image on the snowflake for the New Year. For example, it will be a snowman - the middle of a snowflake and fluffy twigs - rays.

Make the body of a snowflake from a brown portion of plasticine. At first it will be a round cake, press it firmly onto a hard surface, smooth it out on top. Also show 6 rays using stacks. Press the cake around the circumference in 6 places. It is enough to make light cuts.

Make a very thin white cake, much smaller in size. Also go around the edge of the stack. Glue it in the center. Add another white cake and join it to the previous piece. This will be the head of the snowman, but first we prepared the body. The figurine consists of two parts.

Place a New Year's hat on your head. It is not difficult to make if you have red and green plasticine on hand. Glue an imitation of a bright cap with a green trim on your head. Add bubo.

Now you need to somehow decorate your craft, make snowflake rays. Glue small pellets along the edge of the body cake, pierce each with a sharp stick. Glue a twig of white thin plasticine threads onto each ray. Make an imitation of spruce needles using a stack.

Glue spruce branches along each ray. The more magnificent the design, the better. Add a bright scarf to the snowman to prevent him from freezing at night, and decorate with buttons. Glue black eyes and a nose in the shape of a carrot. The figure looks elegant and winter-like.

An interesting plasticine snowflake is ready. Using the same scenario, it’s easy to make other crafts that are bright and stand out against the general background; you can depict not only snowmen on them, but also Santa Claus, the Snow Maiden, a Christmas tree, a deer and other holiday images.

DIY snowman “Skier”

How to make a snowman from felt

In this master class, I propose to sew an interesting felt toy for the New Year with your own hands.

To sew a New Year's toy we will need:

• soft felt (blue or blue, white, a little red for the nose);
• blue or blue floss threads;
• two buttons;
• filling for a snowman (sintepon, holofiber);
• beads or beads for eyes;
• lace.

Using a compass, we draw three circles with a diameter of 5 cm, 4 cm and 3 cm. Using these patterns, we cut out two circles, one of which has a small square at the top, in order to make it convenient to sew the circles to each other.

We take two large circles and sew them together, gradually filling them with filler.

We put two more circles on top, which are slightly smaller, and also sew them together, filling them with filler.

We do the same with the third circle.

Cut out a strip of blue felt for a scarf, 1 cm wide and the length of a snowman.

Place the scarf on the snowman and sew a button in the middle of the scarf.

Sew another button between the bottom circles.

You can make small cuts at the edge of the scarf with scissors.

Cut out a small triangle from red felt for the nose and sew it to the face.

Sew on small beads for the eyes.

For the handles, cut out small circles about 1 cm in diameter and sew them on.

Cut out two squares 1 cm by 1 cm for the boots.

We trim the edges of the squares so that we get triangles and sew them to the snowman.

At the top of the snowman we cut a hole with a ripper to thread the string through.

We thread the lace through the hole.

The snowman is ready, all that remains is to hang it on the Christmas tree or give it to someone as a souvenir.

How to knit the Snowman applique

Not a single New Year is complete without a snowman. And in this master class we will knit a flat applique in the form of this wizard! The product can be hung in your home or workplace to remind you of the upcoming holiday and instill a cheerful mood.

To knit such an applique we will need:

• Yarn in red, white, black and peach (beige) colors;
• Hook 1.75 mm;
• Scissors.

For applique, it is better to use thin yarn. “Children's Novelty” yarn is suitable. It is better to use a hook no larger than 2 mm.

Let's start knitting with peach-colored yarn, since we will first knit the face for Santa Claus.

We form a ring of 6 loops, but do not close it.

Make 1 lifting loop and unroll the knitting. Next we will knit 2 sc in each loop.

Then we make 1 lifting loop again and knit with an increase through 1 loop.

We turn around and make 3 lifting loops. Then we knit another 4 dc at the same point. In the next loop we make 1 sc. We skip 1 loop and perform 5 dc in the new one.

So we will continue knitting until the end.

The beard is tied, now let's start making the hat.

For this we need red yarn.

We join from above into a peach loop from one edge and knit along the peach loops. We simply do 1 sc.

Gradually the cap will narrow. In order for the edges to be even, we will make a sc stitch binding.

We will embroider the eyes with black thread, and we will embroider the nose with peach thread.

Now take the white thread again and make a few horizontal stitches under the nose. And make 1 vertical stitch in the center of the horizontal ones.

The hat is ready, but you can decorate it with a voluminous pompom.

To do this, we attach a thread to the very top central loop on the hat. We dial 10 VP. Next, join with a white thread to the last ch. We will now knit a lush stitch of 5 yarn overs. But we do not knit the yarn overs all at once, but 2 loops at a time. At the end we knit 1 ss.

This is how we knitted a pompom for the hat. We tighten the thread and cut it. We hide all the tails between the loops on the left side of the applique.

Friends, hello!

Once again, today I had to sit and scour the Internet. And do you know why? Because they gave us homework to make a snowman. And from what? So I didn’t know, but then I realized that you can create it from available materials, but you need to use your imagination and ingenuity. Or take ready-made ideas and do the work on them.

In general, I found a bunch of interesting and beautiful things, so I am sharing this information with you, my dear subscribers. And by the way, you can not only make such a snowman for school with your children or kindergarten, but also outside. And even give it to your loved ones and relatives. I hope you have already decided what you will give to everyone? If not, then run by.

Traditionally, such toys are bought in stores, but now it has become very fashionable to create at home and create all sorts of handicrafts. Therefore, in the article you will find many ideas for any age category; this article is mainly devoted to children's work. I wish you all good luck and creative success.

Perhaps you have your own ideas, share them, I will be very grateful and happy. Well, what are we waiting for, let's go have a look!

I think that a couple of years ago, probably even a dozen years ago, such a funny and cheerful toy appeared in the form of such plastic disposable cups. I don’t know who its creator is, but it has become so popular that not a single holiday is complete without it. Do you agree? Especially, such a snowman is made by schools and kindergartens, and indeed almost all educational institutions. This is because making such a miracle is very quick and easy.

You need take a bunch of cups (about 300 pcs.) and also a stapler, and in it staples (1000 pcs.) or use a glue gun - these are the main materials. You will also need some tape, scissors, and a head and hands))). The rest of the decorations, for example a spout or a bucket, eyes, you take and make from scrap materials at your discretion, you can use paper and even vegetables).

Advice! When buying glasses, pay attention to the rim; it should be thin, otherwise it will not be convenient to join the blanks together.

Well, well, as they say, everything is brilliant and simple. Let's start tinkering. Take 164 cups of 100 ml each - for the body, and the remaining 100 pieces. 50 ml each - use for the head. But it doesn’t matter, you can take the same size.

First of all, you need to lay out a circle out of 17 glasses, and fasten each piece together with a stapler, where you have the rim. The bottoms, as you can see in the photo, should be facing inside the circle.

This is how you'll get a hoop, hahaha. What do we do next? And then we attach the second one to this base.

Sew the cups into the second row using a stapler, but place each cup between the first two at the bottom. This is clearly visible in the figure, I hope you understand what I’m talking about.

As a result, step by step you should get something like this in the form of half a hemisphere.

True, leave a hole in the second workpiece, that is, make 4 rows of glasses.

Now connect the head and torso.

Well, how did you get on with the job? The result is an almost completed masterpiece! Decorate it with the missing decorative elements.

You can also, as I said before, use a glue gun instead of a stapler. Follow the same instructions as well.

Just be careful not to get burned!

The result can be completely unexpected, and very fun and funny. They also make Santa Claus this way. Good luck, comrades!

For the guys I can offer this funny option.

Master class on how to make a snowman from a sock

I remember before, when I was a girl, I went to a labor club and there we did all sorts of things, wonders. And they even managed to make clothes for dolls or something else out of ordinary socks. And this winter character, like a snowman, is no exception. You can easily and quickly create it in a couple of minutes. Follow the description in the pictures and you will succeed.

Interesting! And by the way, you can stuff the craft with cotton wool, padding polyester, and even rice or buckwheat.

And here are a couple more ideas on this topic, learn, fortunately, now there is the Internet, it is powerful). Thanks to all the authors for such amazing work!

But look, Olaf has already done something). Looks cool, doesn't it? And a couple more ideas that might come in handy.

Snowman made of threads, a ball and glue - step-by-step instructions for beginners

I remember my mother and I made such a snowman out of threads for an exhibition at school, at that time we had a magazine with a master class. Now you can find such work on the Internet and follow it step by step. It’s not difficult either, you need to dip the white thread in PVA and apply it to the ball, let it dry. Then puncture the balloon and pull it out. The threads will dry and the base will become hard accordingly. Well, then it’s up to your imagination, dress up a fairy-tale character. Sew a hat, mittens and scarf from fabric.

If you still don’t understand what’s what, then look below:

Such a snowman can be huge or small, depending on the size of the ball and how many parts of the body it will consist of.

In general, choose any hero and create a miracle, good luck!

Volumetric paper snowman for the New Year in kindergarten

Of course, what would winter be without a white character? We sculpt it with the kids on the street and create charming works together and collectively. How about a product made from palms in the form of an applique? Do you want the same? So what are you waiting for?

The next work will be a stencil, print the stencils and glue them according to the sample.

In addition, paper products made from paper using the origami technique are in great demand, and perhaps you are also interested in such activities:

You can also do the work as follows: cut three strips from a regular A4 sheet and glue each one to make a sleeve. And then connect all the details, draw a mouth, eyes and nose. And it will be a lot of work.

Also, make a snowman out of regular circles; this applique craft will come in handy for the little ones:

Here are some more sketches that will help you create a couple of original products.

From an ordinary leaf, you can crumple it into three balls and build such a beauty:

Beautiful snowman made of fabric (pattern inside)

Well, now needlewomen, this information is for you. Anyone who is interested in sewing and knitting can easily create such a handmade souvenir.

First, print out this template; you can also draw it by hand. Cut it out.

Then place the stencil on the desired piece of fabric and trace it with chalk. Make two copies of each piece, and then sew it together.

Insert cotton wool or padding polyester inside the product - the body. But don’t put anything into the cap.

Sew the cap to the body. Finish the craft, draw on the eyes, mouth and nose with paints.

In addition, if you did not like this master class, then you can use these diagrams. There is even work in the tilde style.

But look how wonderful this bottle decoration looks.

Snowmen made from cotton pads, cotton wool and sticks

If you are going to take a snowman to an exhibition or competition, then why not make a whole composition in the form of a white snow army). With a forest beauty - a Christmas tree. I won’t write about how to create a Christmas tree, because there is information on this topic, I’ll just show pictures. But I’ll show and tell you how to make the main character.

Well, first, as promised, instructions for creating a creative Christmas tree from disks, and then there will be a sequence of actions for a snowman.

To work you will need:

All instructions are given in pictures-slides, I hope this will be more convenient for perception. Don't forget that you will also need cotton swabs and beads.

The next work will be on a stick, the base will be made of cardboard, it is this that is glued to the ice cream stick, and then cotton pads and decorations are glued to it.

For kindergarten-age children, I propose a job in which you will need to roll balls out of cotton wool and use them to decorate a finished printed or drawn product.

You can also create entire paintings and compositions.

Felt snowman (templates and patterns)

Well, we’ve come to probably the most favorite material, which many beginning craftswomen love, this is felt, since it is practical and easy to use. The thing is that it does not crumble and is easy to work with.

In general, watch and repeat all the actions after the author. First cut out the pieces.

Then apply it to the fabric and cut it out.

Or take ready-made templates from the pattern and create using them, friends. After all, you can sew not only voluminous toys, but also flat ones, in the form of keychains or crafts for the Christmas tree.

Now I’m sharing the patterns that caught my eye.

Knitted snowman (patterns and descriptions)

Well, now for those who are into knitting, all these crochet and knitting descriptions might be helpful. Take them into service, because such cute toys will become a souvenir or gift to your family and friends.

Creative ideas for snowmen made from scrap materials

And finally, friends, I want to demonstrate some more ideas from which you can make such a craft, for example, from acorns.

A product made from CDs looks interesting.

Also, make a character out of pompoms.

Or use cotton wool, which you glue onto cardboard.

And display the result on stands.

Here are more ideas from bottles, corks, caps.

The next option is made from plates and mugs of disposable tableware.

Also popsicle sticks, take a look.

Here's another delight from an ordinary pine cone.

You can also make such a souvenir with Santa Claus from plasticine or modeling dough.

Or use pasta.

Don't forget to use whatever paper you have at hand to make papier-mâché out of it.

And also that you can embroider a picture from floss threads.

Or fill New Year's balls with any material and get another craft.

And even for the street, you can make such a character out of ordinary car tires. Original, isn't it? Decorate your garden plot.

Here are more options for the site, hahaha, they even made it out of polyurethane foam and ordinary bottles.

Friends, this is the end of this fun post, I hope you liked all the masterpieces. And today a snowman appeared in your house, and what you made it from, I hope you will share below the article.

Add to my group in contact, write, leave reviews. Bye everyone!

Almost all children look forward to winter only because it brings a lot of snow - the most fertile material for unusual outdoor crafts. Well, what if someone lives where there is no snow at all or there is so little snow that it is impossible to make even one snowball? In this case, children can make a snowman with their own hands from scrap materials. They can be cotton wool, socks, plastic bottles, disposable cups, cotton pads, paper, balls, threads, foam, fabric and much more. Such a cute craft, created at home, will be a wonderful souvenir for the New Year 2018 or a gift to a friend. We are sure: master classes with photos, videos and step-by-step explanations of the process will help you choose the material from which you will make your “snow” man just flawlessly.

Unusual DIY snowman from scrap materials for New Year 2018

What do real craftsmen use to create their crafts? There are probably no things from which a good craftsman could not make something special. For example, a very unusual do-it-yourself snowman from scrap materials for the New Year 2018 can be made from old mittens and socks, bottle caps and tennis balls, balloons and wooden sticks, cans, bottles and even pebbles.

New Year's "melting" snowman made of pebbles - Master class with photos

Not only builders use stones in their work. For example, children can be very enthusiastic about the idea of ​​​​creating an unusual “melting” snowman with their own hands from scrap materials (pebbles) and making it for the New Year 2018. Read this simple master class carefully and make a cute New Year’s souvenir. But first, still find a couple of flat stones or pebbles on the street, different in size. So, after that, buy super glue, nail polish (white, black, orange and red) or acrylic paints in the same colors.

You can coat the craft with glitter varnish, attach a scarf to the snow man instead of drawing his eyes and nose, and make the details of the craft from beads or buttons.

Do-it-yourself openwork snowman made of threads - Video master class and step-by-step instructions

You have probably already seen unusual “airy” crafts more than once, hollow on the inside, but on the outside looking like a bizarre cobweb that has taken on a wide variety of forms? You most likely admired the skill of the craftsmen who created such beauty? Then you will like the idea of ​​​​making an openwork snowman from threads with your own hands, and our video master class and step-by-step instructions will help you understand the technique of creating such an original product.

How to make a snowman from threads - Master class with video and explanations

In order for you to make an openwork snowman made of threads with your own hands - a video master class and step-by-step instructions are included on the page - prepare the following:

• PVA glue;
• White threads;
• Felt in red and orange colors;
• Glue gun;
• Beads or buttons;
• Twigs;
• Air balloons.

1. After inflating 3 balloons of different sizes, wrap them with threads like a cobweb and coat them with PVA glue. After waiting for the glue to dry completely, remove the balls by first piercing them with a pin.
2. Glue the balls together with a glue gun.
3. Once all the balls are glued together, attach felt button eyes or beads, a nose and a mouth to the snowman's head.
4. Make handles from branches by drawing balls of thread from inside and securing them on the outside with a glue gun. Give the snowman a “broom” made of twigs tied to a long stick.
5. Put a scarf and a red felt hat on the snowman. All is ready!

The simplest DIY paper snowman - Templates for free download

Paper crafts are the easiest and fastest to make. In addition, their cost is tens of times lower than the price of products made from other materials. For example, the simplest DIY paper snowman, templates for which you can download for free on our website, will cost you literally a penny. However, it will bring a lot of joy to the person who received a cute craft for the New Year 2018.

New Year's paper snowman templates for free download

In order to please your friends with a pleasant New Year's gift, you don't need to save money for this present all year. Give your friend the simplest snowman made with your own hands from paper - templates for free download of the craft are included.

After downloading the templates, glue all the parts of the craft with PVA glue. You can make a whole family of snowmen, giving each of them to your household and friends. Write New Year's wishes on the back of the product.

How to make a snowman from plastic cups and garlands for the New Year

Sometimes popular manufacturers have no idea how craftsmen use their products. For example, it would never have occurred to them how they came up with the idea of ​​making a snowman out of plastic cups and garlands and decorating their house with such a work of art for the New Year. Meanwhile, more and more people are trying to create similar home decor for the winter holidays.

New Year's snowman made from plastic cups - Master class on video

Try to create the figure of this New Year's character at home. Well, you will learn how to make a snowman from plastic cups and garlands for the New Year from the detailed master class in the video.

Interesting: when the snowman is ready, you can hide little surprises for each family member and sweets for children in the empty spaces of his cups.

How to make a snowman from disposable cups - Step-by-step master class instructions

The main New Year's decoration, of course, is the Christmas tree. On December 31, under the fluffy beauty, all family members find gifts left there in advance by their loved ones. Well, what if there are so many presents that they simply don’t fit in one room? In order not to purchase a second Christmas tree, read how to make a snowman from disposable cups - the step-by-step instructions of the master class will help you with this. A New Year's figurine will decorate the nursery - at its foot you can leave gifts for the little ones.

Large snowman made from disposable cups—Master class with photos

If you want to learn how to make a big snowman from ordinary disposable cups, read this master class to the end, study its photos and step-by-step instructions.

How to make a snowman from plastic bottles - Step-by-step instructions with photos

You already know what ideas a person’s rich imagination can suggest. No one remembers who was the first to think of how to make a funny snowman out of plastic bottles, but whoever it was, we share his knowledge in our step-by-step instructions with photos. By the way, please note: using several dozen milk bottles, you can make a large snowman - a yard decoration.

Little snowman from a plastic milk bottle - Master class with photos

Before you make a snowman out of plastic bottles (step-by-step instructions with photos are located just below), you and your children will have to drink milk, kefir or yogurt. Moreover, the more crafts you want to make, the more dairy products you will have to consume. It’s tasty, and most importantly, it’s good for the kids’ creativity. So, get your bottles ready and get started.

How to sew a snowman with your own hands from socks for the New Year 2018

Before the end of 2017, start collecting recommendations for creating New Year's souvenirs into your collection of useful tips and master classes. For example, save there step-by-step instructions telling you how to sew a snowman with your own hands from socks for the New Year 2018. Having completed them, you can give many of your acquaintances and friends cute homemade gifts.

Homemade New Year's snowman 2018 from socks - Step by step instructions

Do you have time, imagination, a desire to please your loved ones with New Year's gifts? Then you will be curious to know how to sew a cute little snowman with your own hands from simple socks for the New Year 2018. Follow the step-by-step instructions and you'll make some cute souvenirs over the course of the evening.

Before starting work, prepare:

• White long socks or knee socks;
• Threads;
• A needle;
• Multi-colored buttons;
• PVA glue;
• Textile;
• Beads;
• Elastic bands;
• Rice or pearl barley.

The photo shows the sequence of your actions.

1. First, cut off the top of the sock. After attaching the elastic band to the end of the sock, turn it inside out and fill it with pearl barley or rice. There should still be a little empty space left at the top of the sock.
2. Tie the top end of the sock with an elastic band. Pull a thin string or rubber band over the middle of the already stuffed future craft - you will get two balls.
3. Glue beads or buttons for the snowman's eyes, nose and mouth to the small ball. Instead of a nose, you can use a bright elongated button.
4. Glue buttons onto the snowman’s white “kaftan,” and put a hat made from the remnants of a used sock on his head. Decorate the hat with bright fabric. Tie a scarf to a fairy-tale character.

Do-it-yourself fluffy New Year's snowman from cotton pads - Step-by-step master class

This photo master class with step-by-step explanations of the master’s work sequence will help you make a fluffy New Year’s snowman with your own hands from cotton pads. Creating one such craft will take no more than 10-15 minutes, so in an hour you can make at least 4-6 small snowmen and decorate the Christmas tree with them for the New Year 2018.

Making a “Snowman” applique from cotton pads - Master class with photos

A do-it-yourself fluffy New Year's snowman made from cotton pads (you can find a step-by-step master class on our website) will be an excellent gift for your mother or grandmother on December 31st. Help your child make a neat applique on colored cardboard and sign the craft with words of wishes on the back.

Place on the table:

• Blue cardboard;
• Three cotton pads;
• Figured hole punch;
• Snowflakes, snowdrifts, snowman's cap and carrots, prepared in advance;
• Black felt-tip pen;
• Glue stick;
• Scissors;
• Oilcloth.

How to make a snowman out of cotton wool with your own hands - Master class with explanations and photos

If you have an idea to please your family with original crafts and gifts, we will teach you how to make a snowman out of cotton wool with your own hands, and a master class with explanations and photos of each step will help you make a very unusual gift. However, it will be enough for experienced craftsmen to watch this video.

Homemade New Year's snowman made of cotton wool - Master class with photos

In order to learn how to quickly and accurately make a snowman with your own hands from cotton wool and the base of a toilet paper roll, study this master class with explanations and photos.

1. Prepare cotton wool, a cardboard toilet paper roll, scissors, glue and colorful woolen threads.

   

2. Apply glue to the roll and start wrapping cotton wool around it. Each layer of cotton wool must be glued.

   

3. Cut out a rectangle measuring 6.4cm x 5.1cm from black construction paper.

   

4. Start making a hat for the snowman (see photo).

   

5. Cut out a long rectangle from orange paper and decorate your hat with this “ribbon”.

   

6. Glue the snowman's nose and eyes from beads.

   

7. Use seven tiny paper circles to create a mouth for the snowman.

   

8. You can attach handles like these to the snowman.

   

9. The craft is almost ready and is very nice to iron.

   

10. Now all that remains is to attach a rope or woolen thread to the snowman, and the craft can be hung above the table or on the Christmas tree.

    

    

How to make a snowman with your own hands from threads and balls at home - Video and photos with explanations

After reading how you can easily and quickly make a magical snowman with your own hands from threads and balls at home, watching the videos and photos presented here with explanations, you will learn how to make beautiful, unusual New Year's souvenirs.

Snowman made of threads and balls for the New Year 2018 - Master class with photographs

Before you make a snowman with your own hands from threads and balls at home - videos and photos with explanations will help you figure it out - prepare all the materials and tools:

• Balloons;
• White threads;
• PVA glue;
• Wire;
• Scissors;
• Red yarn;
• Black buttons.

Now, having carefully studied all the master classes with step-by-step instructions, photos and videos telling you how to make a snowman with your own hands for the New Year 2018 from any available materials at home, you can please your family with unusual crafts for the holiday. Create the best works from balls and threads, paper and cotton pads, socks, disposable cups, plastic bottles and cotton wool and share your skills with friends!

The winter holidays are coming very soon, and it’s time to pick up master classes on which you can make a snowman with your own hands for the New Year 2018 for kindergarten or school - from paper, from thread, from cotton pads, from socks and from other improvised materials.

Winter and New Year are all things that children look forward to. For kids, a festive tree, gifts, fluffy snow, winter fun, snowmen and snowballs are the most desirable winter entertainment. And we offer to learn how to make a snowman with your own hands for the New Year. You can make a wonderful snow beauty from the materials you have at home, together with your child, and decorate a room, a Christmas tree, or for handicraft competitions in kindergarten or school.

In order to create an adorable snowman with your own hands for the New Year from socks, there are several ways. All of them are based on the fact that part of any sock is fastened on one side and filler is stuffed into the sock. And then you need to pull the socks in the middle, tie them at the top and decorate them.

The article will provide several variations with tips and descriptions to make the creative process more exciting and fruitful. We will try to make funny snowmen from various materials, from everything that can be found at home:

• socks;
• plastic cups;
• paper;
• disks;
• thread

Let's start! The first master class is dedicated to a snowman made from simple socks.

Snowman made from socks

In order to make such a beauty yourself you need:

1. Socks. You need to take white ones for the snowman’s body and you can take colored ones for the cap and clothes.
2. Threads with a needle.
3. Glue gun.
4. Paints and brush.
5. Beads.
6. Felt.
7. Sintepon.
8. Scissors.

Now look at several collections of photos with step-by-step instructions for making a snowman with your own hands for the New Year:

Step-by-step photos of making a snowman from socks

Pretty simple instructions, not a complicated process, amazing results. This is all a formula for success for creativity with children. You can decorate a snowman made from socks to your taste, completely different from the one in the photo. Here you can use your imagination and use any material you find at home.

Video tutorial on making snowmen:

We use threads

Next, we will describe two options for how to make a snowman with your own hands for the New Year from threads. One of them is quite simple. This is a snowman made from pompoms, which can be made for a competition for school or kindergarten. For it we need:

• white threads. Here it is better to take acrylic or wool mixture;
• half beads for eyes and decorations;
• ribbon or decorative braid;
• fluffy wire. It is sold at any craft store;
• twigs for pens;
• glue. You can use a hot glue gun or Moment Crystal instant glue.

Now let's start creating a fluffy snowman:

1. Initially you need to make 2 pompoms from threads. To do this, take 2 cardboards. One is wider, the other is a little narrower, since we need to make one large pom-pom, the other smaller. You need to wrap as much thread as possible on these cardboards. The pomp of the pompom depends on the number of threads. Then we pull the thread inside the wound threads, tie it at one end and cut it at the other. We get two pompoms for the bottom and top of the snowman.
2. Now you need to tie both pompoms together using the tails of the threads.
3. Our snowman is ready. All that remains is to glue on his eyes and nose, buttons and branches on the sides of the handle.
4. We tie a ribbon scarf to the snowman. Before this, the edges of the tape must be cut in a special way. To do this, fold the tape lengthwise and cut it diagonally from the middle to the tip, unfold the tape, and lightly scorch the edges with a lighter.
5. Now we make headphones from fluffy wire. Let's bend it as shown in the picture and put it on the snowman's head.

Step-by-step photos of making New Year's snowmen

• white threads. This snowman requires knitting cotton;
• PVA glue;
• air balloons;
• twigs for pens;
• buttons for eyes and for decoration;
• paper or felt for the hat;
• a piece of fabric for a scarf;
• hot glue.

When everything is ready, we begin to make an openwork thread snowman:

1. Inflate two balloons. We make one large, the second smaller.
2. Pour PVA glue into a bowl and soak the threads there.
3. After that, we immediately begin to wind the threads in glue onto the ball in a random order, chaotically.
4. When both balls are wrapped with thread, leave them to dry. It's better to leave the balls overnight.
5. When the threads are dry, you need to burst the balls and carefully pull them out.
6. Now we glue both balls, the small one on top of the large one.
7. At the bottom of the large ball, cut off the rounded part with scissors so that the snowman stands steadily.
8. Glue handles from twigs to the snowman.
9. We cut out the hat, glue its parts and put it on the top of the snowman’s head, securing it with glue.
10. Now we need to glue buttons in the form of eyes onto the snowman’s body for decoration.
11. We make a carrot out of paper or felt and glue it in place of the spout.
12. We make a scarf from a piece of fabric and tie it to the snowman.

PHOTO: Snowman made of threads for New Year 2018

It should be noted that the process is quite labor-intensive, since you need to carefully make the balls themselves from threads in glue, but when this stage is completed and the balls have dried, all that remains is a pleasant job that you can do together with the kids.

Such a snowman, made with your own hands for the New Year 2018, will be very good for an exhibition or decoration for a kindergarten or school group.

Original ideas made from paper

Paper crafting is a very simple and surprisingly enjoyable activity. Kids really love this type of creativity. For the New Year, you can make a snowman out of paper with your own hands. Below are several options for ideas with a step-by-step description of their implementation. Let's see how you can make amazing snowmen from plain paper or paper napkins.

Snowman made from palms for a school competition

• white, blue, orange paper;
• pencil;
• scissors;
• glue.

Let's get started:

1. On white paper you need to circle your palms and cut them out. You need to make as many of these palms as possible.
2. From blue paper we cut out a cap - a triangle and three snowflakes for buttons.
3. Now we glue the palms. You need to make 3 circles out of them: 1 large, 1 smaller and small.
4. Glue all three circles together.
5. Now we glue the cap on top and snowflakes in place of the buttons.
6. The nose, eyes and smile can be cut out of colored paper and pasted, or you can draw with paints or felt-tip pens.

The snowman made from palms is ready. It can be attached to the wall of a child’s room or in a kindergarten group.

Snowman made from paper napkins

Let's prepare everything we need:

• white paper napkins;
• pencil;
• scissors;
• glue gun;
• three foam balls of different sizes;
• skewers or toothpicks for connecting the balls together;
• buttons for eyes;
• felt or paper orange cone for the spout;
• twigs for pens.

Let's start tinkering:

1. Napkins need to be cut into squares.
2. Cut off the bottom of the largest ball so that the bottom is flat for stability.
3. Now we cover each ball with napkins. We will glue using the trimming technique. To do this, twist a square of napkin onto the other end of a pencil or any wooden stick. Dip it into PVA glue and apply it to the ball. So we cover all the balls. Glue all the elements close to each other, so the balls will turn out fluffier.
4. Then glue the balls one on top of the other.
5. We attach the branches - arms and eyes with a nose.

The paper napkin snowman is ready. You can decorate it to your liking, put a scarf or hat on it.

Look at some more photos with ideas on how you can make a snowman with your own hands for the New Year:

Applications with snowmen

Surprisingly, applique can be made not from paper. Below is a step-by-step master class on how to make a snowman with your own hands for the New Year from cotton pads, which you can send to a competition at school or kindergarten. This will be a beautiful New Year's applique. The child himself will be happy to do it, but under the supervision of his parents.

To tell your child what to do, let’s take a closer look at how to do this. Let's get ready first:

• cotton pads. We will make a snowman and snowdrifts from them;
• thick cardboard for the base. It can be any color. Blue, cyan or purple will be very good;
• glue. You can use PVA or any other for paper;
• colored paper;
• scissors.

Now let's begin:

1. On the cardboard base we glue a snowman made of three or two cotton pads. Just glue the disks one on top of the other. You can make one or two such snowmen on one cardboard.
2. Now you need to paint the snowman. Cut out a cap, eyes and nose from colored paper. Cut out the scarf and handles with mittens. We glue all the details onto the snowman.
3. We will also paste snowdrifts from halves of cotton pads onto the panel of snowmen. You can cut out rectangles of houses and glue them to the sides, drawing the windows with a felt-tip pen.

The child can dream up his own imagination and come up with something to add to the applique. It could be the sun, clouds, and so on.

In addition, cotton pads can be used to make an excellent toy. You can hang it on the Christmas tree or decorate it with a Christmas wreath, walls and so on. Let's get ready for work:

• cotton pads;
• threads with a needle;
• a little padding polyester;
• felt;
• a pair of beads for eyes;
• glue. It is better to use a second Crystal Moment.

Now let's get started:

1. Let's take 2 disks for the lower part and 2 for the upper. We will cut the ones for the top a little in a circle, making them smaller in diameter.
2. Now you need to sew the parts together with a seam over the edge. But let's leave a little unstitched edge for filling and sewing them together.
3. Let's fill both parts with padding polyester.
4. Let's put them together one on one where there is an unsewn gap and sew them up.
5. Now let's decorate. We cut out a cap from felt and sew it to the snowman on the top of the head using the same seam.
6. Next we will glue the beads - eyes. Cut out a triangle of orange felt and glue it in place of the spout.
7. We will cut out a strip of felt - a scarf and tie it to the snowman.
8. You can make decorations by cutting out leaves and berries from colored felt and sticking them on the snowman.

This beauty can be hung on a Christmas tree by attaching a string to it or used to decorate a wreath or for other purposes.

Plastic cups - turn them into a snowman

Now let’s make a snowman with our own hands for the New Year 2018 from cups, ordinary plastic disposable cups.

This DIY snowman will turn out to be quite large. They can decorate an apartment, a group in a kindergarten, a classroom at school. You can place a garland inside and then the snowman will glow. But let's talk about everything in detail and in order.

Let's prepare everything for work:

1. Plastic cups. For one snowman we need as many cups as large as you need the snowman. For a big snowman you need quite a lot. The first row alone will take 25 cups.
2. Stapler and staples for connecting cups.
3. You can take a real hat and scarf and then dress up the figurine.
4. For the eyes, you can take balls equal in size to the neck of the glass. We'll paint them black and put them in the cup itself in the right places.
5. Glue the nose into a carrot-shaped cone from orange felt.
6. We will also need a glue gun.

Let's get started:

1. Lay out the first row like this. Place the cups in a circle with the bottom inward and the neck outward. We fasten the glasses together with a stapler. We make several rows in this way, each subsequent one is smaller than the previous one, since we place the glasses between those in the previous row.
2. Now let's make the head. The first row for the ball under the head consists of 18 cups. We do everything exactly the same.
3. Then we attach the head to the body with a stapler.
4. Now we insert the balls - eyes. We will first paint them black and attach them with glue.
5. Then we attach the spout.
6. We tie a scarf and put a cap on top. For reliability, secure with glue.
7. You can place a garland inside or leave the snowman like that.

The snowman can be decorated to your liking. You can attach twigs to him as handles and “give” a broom in his hands. You can attach a wide felt strap to the snowman, or a real one if you can find the right size. Attach it with a stapler.

You can make buttons from exactly the same balls by attaching them to the neck of the glass in suitable places. Or cut out snowflakes from colored paper and glue them to the snowman anywhere, as if real snow fluffs lay on top of our handsome man.

You can make such a snowman for a competition for school or kindergarten!

Another wonderful snowman that you can make with your own hands for the New Year is presented in the video below:

If your child has been asked to make a New Year’s craft for the garden or school, then our article is for you. We will tell you how and, most importantly, what you can make a snowman out of.

How to make a snowman from a sock with your own hands

White socks are an excellent preparation for a snowman. Mom's or dad's things will turn into a large snowman, and small socks will be suitable for making snowmen.

So, we need one white sock, scissors, stuffing, thread or elastic bands.

1. Cut off the bottom part of the whole sock.
2. We tie one end with an elastic band and then turn it inside out.
3. Fill a sock with any cereal. Bulk products will make the toy more stable and make it easy to shape it into the desired shape.
4. We also tie the other end with an elastic band.
5. Using our hands we give the snowman a slightly elongated shape. And to highlight the snowman’s head and torso, we tie the piece just above the middle. The bottom part should be slightly larger and thicker than the top.
6. Now you can make a hat from the remaining part of the sock. A narrow piece of any fabric will replace a scarf for a snowman.
7. All that remains is to make the eyes and nose, and glue two or three buttons to the bottom.

To get acquainted with the master class in more detail and learn better how to make a snowman from socks, watch the video.

How to make a snowman from plastic cups

A snowman made from plastic cups turns out to be large and charismatic. It can be placed in the classroom and in the children's room. Just leave more space!

The snowman will require more than three hundred plastic cups, a large stapler and glue. Our product will consist of two large balls. Let's start assembling the snowman from the bottom.

1. We fasten the first row of 25 cups in a circle using a large stapler. We connect the cups to each other neatly and evenly.
2. Now we place the following cups in turn on the resulting circle and connect them to each other and to the previous row. Thus, we complete the first half of the ball. By analogy, we perform the second half.
3. The top part of the snowman is also done, but for the first row of the head, 22 cups are already taken. Glue the resulting balls together.
4. We make the eyes and nose.

All that remains is to come up with a headdress for the snowman and choose a suitable scarf.

And the available video tutorial will clearly demonstrate the process of making a snowman from plastic glasses.

How to make a snowman from threads

The next master class will help you learn how to make aerial snowmen. They are based on balloons, glue and thread.

We choose PVA glue, it has good adhesion and does not leave yellow marks. We take white threads of any thickness.

1. Inflate the balloons so that one is slightly larger than the other. Let's connect them with tape.
2. Let's prepare the adhesive composition. To do this, pour a little PVA glue into a small container, then add water and mix everything.
3. Soak the threads in glue and begin to wind them in random order, first on one, then on the other ball.
4. After drying, you need to pierce both balls and pull out their remains through the threads.

The result was lace balloons. You can attach a thread or string to them and hang them on the Christmas tree. But we need a snowman made of threads. Therefore, we glue the balls together to make a snowman.

All that remains is to come up with a headdress and a scarf. Glue on the drawn eyes or buttons. A carrot-shaped nose is made from orange paper, folded into a narrow cone, or plasticine. Ready!

All the details of the master class are shown in our video.

DIY light bulb snowman (master class)

Don't rush to throw away your old incandescent lamps. Let's make cute snowmen from light bulbs that will decorate any Christmas tree. You can remove the internal parts of the lamp, but this will require carefully disassembling the top of the base. It's up to you to decide whether you will do this painstaking work.

1. The first step is to paint the glass part of the lamp with acrylic paint, using a sponge to apply it evenly over the surface.
2. After the paint has dried, the base is tied with a rope and a loop is glued to hang the toy on the Christmas tree.
3. The eyes, mouth and nose are made using beads or painted with paints, as in the photo.

Light bulbs are quite fragile, so you should not leave children unattended while working with them.

The full version of the master class can be seen on the video.

How to make a paper snowman

Paper is the most popular material among children. It provides a lot of opportunities for making various crafts and souvenirs.

How to make DIY Christmas cards with snowmen

Here's how to make a New Year's card with a snowman applique.

Prepare a white sheet of thick paper, cardboard, cotton wool and glue.

1. Fold the sheet in half widthwise and set it aside for now.
2. From white cardboard you need to cut out two touching circles, one slightly larger than the other.
3. We apply a layer of glue to the base of our snowman, and a thin layer of cotton wool on it.
4. We cut off all the excess and glue the snowman onto the main sheet.
5. We finish his hat, eyes and nose from beads.

Now let’s use our imagination and decorate the card at our own discretion. And our video will help with this.

DIY New Year's paper snowman in 3D

A gift card with a three-dimensional or so-called 3D applique looks interesting. This result is achieved by cutting and bending the elements of the postcard.

We will need two sheets of paper, and the white one should be 1 cm shorter in width and length than the colored one.

1. Fold a white sheet of paper in half widthwise and make two parallel cuts. This is how we designate the lower part of the snowman.
2. We bend the part resulting from the cuts and direct it inward.
3. We make two smaller cuts on one of the folds. And we also direct the bent part inward.
4. All that remains is to make the last two small cuts and again bend the resulting small element inward.

Now we open the card, and we get a three-dimensional snowman inside. Glue the wrong side of the white sheet onto the colored one. More details in the video.

The main element of such a card is a snowman made of several layers of paper, which give it volume and splendor.

• For the base of the postcard, take a thick sheet of cardboard, or two sheets of different colors. Fold them in half.
• The snowman is made from two circles. For a fluffy snowman you will need at least 20 circles of each size. We cut them out of white paper and bend each one in half.
• We glue one upper and lower circle completely so that along the fold they coincide with the fold of the base sheet. Apply glue to the remaining circles only along the outer part of the fold, and glue them to the previous circle. And so on for all the top twenty pieces.
• And then the bottom twenty.
• All that remains is to decorate the card.

Detailed instructions - on video:

New Year's craft: paper snowman - garland

If desired, windows, walls and the Christmas tree can be decorated with a garland of snowmen.

1. Fold a white sheet of A4 scale in half lengthwise and cut along the fold line.
2. We put one part aside, and fold the second in half widthwise, and then again in the form of an accordion.
3. Now on the front side we draw the silhouette of a snowman so that its handles end at the edge of the sheet. This will be the place where the garland adheres.
4. We cut out the design along the contour, and we have part of our garland of four snowmen ready.
5. We also make a few more links of our product, and then fasten the parts (where the handles are) together with narrow tape.

Here's how it was done in the video masterclass:

Snowman on the window

The windows of houses with New Year's paintings look beautiful. And if not everyone can take on Santa Claus and the Snow Maiden, then even a child can handle a snowman. Two or three white circles, a mouth, nose, eyes, a bucket on the head - and one of the main characters of winter is ready!

Today we told and showed how to make a snowman from paper, thread, plastic cups, socks and even ordinary light bulbs. Don’t forget to use our material if you want to make an original decoration for your home or as a gift to friends, or if a craft competition is announced at school or in the garden.