Fashion is changeable - it comes and goes. But there are things that remain forever in our wardrobe, which are not affected by time or fashion - this is a crochet openwork shawl. Even simple clothes, if you put on a beautiful shawl, openwork bactus, triangular scarf, scarf, will look completely different - more feminine, a little more mysterious. Crocheting a shawl is an activity for a real lady. You won’t surprise anyone with simple shawls now. And we will tell you how to crochet a very beautiful shawl, crochet a scarf, a scarf, and also how to crochet a bactus. Schemes and descriptions are attached.

Simple crochet shawl, crocheted flower pattern shawl. Such an openwork scarf can be worn over outerwear, or wrapped around the throat in cold weather. The openwork crochet scarf has dimensions of 90 cm / 90 cm. Crocheting a shawl is a useful activity for several evenings. Approximate consumption of yarn (50% wool, 50% acrylic) - 400-450 grams. We will knit with a hook 2 mm thick. Knitting density: 1 square has a side of 9 cm.

Designations:

1. VP - air loop.
2. PBN (SS) - half-column b / n (connecting st.).
3. RLS - b / n column.
4. 2 CH - closed together.
5. 3 CH - closed together.

We start knitting a square with a chain of 6 VPs. On this chain, we knit further in this way:

1st row: 1 VP for 1 RLS and 11 RLS we knit around, close the circle 1 PBN (SS) in the VP of the beginning of the row.

2nd row: (15 VP, 1 PBN (SS) in the next RLS) - repeat 12 times.

3rd row: 1 PBN (SS) in each of the 1st 7 loops of the first arch of 15 VP; 3 VP for 1 CH, 2 CH, 4 VP and 3 CH in the first arch of 15 VP; (4 VP, 1 RLS in the next arch) - repeat 2 times, 4 VP; * 3 CH, 4 VP and 3 CH in the next arch, (4 VP, 1 RLS in the next arch) - repeat 2 times, 4 VP *, repeat from * to * 3 times in total; finish 1 PBN (SS) in the third VP of the beginning of the series.

4th row: start with an arch of 4 VPs: 2 PBN (SS); 3 VP for 1 CH, 2 CH, 4 VP, 3 CH in the first arch; 4 VP, 1 RLS in the next arch of 4 VP, 3 CH in the next arch of 4 VP, 1 RLS in the next arch of 4 VP; * 3 CH, 4 VP and 3 CH in the next arch of 4 VP, 1 RLS in the next an arch of 4 VP, 3 CH in the next. arch of 4 VP, 1 RLS in the next. arch of 4 VP *; repeat from * to * 3 times in total; then we finish 1 PBN (SS) in the third VP of the beginning of the row and finish the square.

Then we make 100 such squares. We collect all the squares, and combine them, as in the assembly diagram. We make 10 stripes from 10 squares, and then we connect 10 strips. You can decorate the shawl with a fringe. We have finished crocheting a shawl with patterns.

Crochet shawl for beginners, fast and beautiful - nothing is impossible. The bactus pattern is simple, even if you are not very good at crocheting - it will not be difficult for you to crochet a bactus shawl. The bactus scarf has 3 sides. Its dimensions are: 150 cm / 54 cm / 54 cm. 150 cm is the size of the base of the bactus. For knitting, yarn is used (50% acrylic, 30% polyamide, 20% wool, 50 gr. / 300 m.) - 2 skeins. Hook 3 mm thick. Crocheted openwork scarf is knitted with a fantasy pattern. We knit the harness according to the description. Knitting density: 2 motifs with a fantasy pattern: 11 cm / 10 cm = 10 rows.

Designations:

1. VP - air loop.
2. PBN (SS) - a half-column without a crochet (connecting st.).
3. RLS - single crochet.
4. CH - double crochet.
5. С2Н - double crochet.
6. С3Н - a column with three crochets.

How to knit a scarf? We begin to knit a scarf with a crochet pattern with 1 VP, knit with a fantasy pattern, adding on both sides as shown in the addition scheme: 13 times for one motive in 4 p. When you reach a height of 54 cm (54 rows from the beginning of knitting), you should have 27 motifs. We are finishing the main work, only the binding of the bactus remains.

Strapping: * 3 RLS in the arch from the VP of the previous row, 5 VP, 1 PBN (SS) in the last RLS *, repeat from * to *. We crochet on three sides of the scarf.

Bosnian bactus crochet is such knitting when a scarf is knitted behind the back walls. This interesting type of knitting came from Bosnia. Knitting in its appearance resembles a woven fabric, this technique is also called Slip Stitch Crochet. The patterns of a crocheted scarf, crocheted in this technique, resemble tight loops - these are connecting posts (blind loops). By combining connecting posts and air loops in different ways, you can get an interesting product for the neck. We invite you to crochet a bactus pattern with your own hands. Next, we will crochet a bactus master class.

The connecting column is knitted like this:

Bactus is knitted all the time behind the back wall. We knit in facial and purl cases only on the same wall - on the back.

For work you will need:

1. Semi-woolen yarn (45% wool, 55% acrylic) 380 m/100 gr. - 1.5 skeins.
2. Hook 2.5 mm thick.

In Bosnian knitting, each even row is knitted with connecting posts.

1st row: at the beginning we make 4 air loops, then 2 CCH in the first loop of the chain, 3 VP.

2nd row: connecting posts. In the second ch from the hook, tie the sl-st behind the back wall of the loop. So knit the whole row.

Next, knit according to the scheme, alternating a row of CCH and a row of SS - 2 times, a row of a sirloin wall: * 1 CCH, 1VP * - repeat., Then 1 row of connecting posts (SS). At the end of each row, do not forget to knit an extreme loop. Having knitted to the middle of the bactus, about 65-70 cm from the beginning - knit without increments 1 row of CCH, then a row of CC, and 1 row of CCH. Then knit the rows not to the end, as if making decreases. On the edge, do not forget to tie 3 VP for the fringe. Check the second part of the scarf with the first - so that they are symmetrical. After 140 cm from the beginning, we finish knitting. Tie the edge 1 next to RLS, 1 next to the crayfish step.

An interesting small shawl can be knitted from the remnants of yarn. The crochet pattern for shawls is quite simple, such squares are used to knit blankets, pillows, bags, etc. The size of the scarf is 100 cm / 44 cm without tassels. 100-150 gr is enough for a scarf. yarn.

For work you will need:

1. Yarn (wool with cashmere 120 m / 25 gr.) 25 gr. five colors.
2. Hook 2.5 mm.

Knitting density: rhombus = 12.5 cm / 11 cm.

The crochet scarf is knitted elementarily. First, we perform a chain of 5 VPs, close the chain with 1 conn. Art. (column. column) in the ring. Next, we knit according to scheme A from the first to the third circular row. Each circular row starts with 3 VP instead of the 1st tbsp. s / n (double crochet), also complete 1 st / s / n, 1 p / s or 1 connection. Art.

First, we perform a chain of 5 VPs, close it with 1 connecting column into a ring. We knit according to scheme B from the 1st to the 3rd circular row, while starting each row with 3 VP instead of the 1st column with a crochet, or with 4 VP instead of the 1st column with 2 crochets.

The scarf is knitted from 28 whole rhombuses, and 8 halves, we choose the colors arbitrarily, but so that they are combined. Lay out the rhombuses and halves. Connect all the rhombuses, tying one to the other with a crochet - in the last cr. in a row, instead of VP, we perform a connecting column into the next VP. We make brushes for a shawl from pieces of thread of different colors, pieces 30 cm long. We attach brushes to a scarf.

A crochet baktus shawl will come in handy in any bad weather. The shawl is decorated with trim, a knitting pattern is given for it. At the end we decorate the shawl with laces and tassels. Bactus dimensions: 100 cm / 47 cm. Knitting density: 9.5 cm / 9.5 cm - square.

For work you will need:

1. Wool mixture yarn (50% acrylic, 50% wool), 200 m / 50 grams.
2. Hook 3 mm thick.

Notation

• Air loop - VP.
• Single crochet - RLS.
• Half-column without crochet (connecting column) PBN (SS).
• Column with 2 crochets -С2Н.
• Closed together - 3CH.

How to knit 2 dc knitted together and 3 dc knitted together.

Explanations

First you need to make a chain of 8VP, then close in a circle 1 PBN (SS) in the first VP.

1st row: 3 ch + 2 dc closed together = 3 dc closed together, * 3 ch, 3dc closed together, 1 ch, 3 dc closed in. *, repeat from * to * 3 times, 3 ch, 3 dc closed vm., 1 VP, and 1 PBN (SS) closed vm. in the third VP of the beginning of the row.

2nd row: 1 PBN (SS) to start from the arch, 3 CH closed together, * 3 ch, 3 dc closed together, 2 ch, 3 dc, 2 ch, 3 dc closed together * repeat from * to * 3 times. 3 VP, 3 CH closed together, 2 VP, 3 CH, 2 VP, we finish row 1 PBN (SS) in the third VP of the beginning of the row.

3rd p.: 1 PBN (SS) start from the arch, 3 CH closed together, * 3 VP, 3 CH closed vm., 2 VP, 7 CH, 2 VP, 3 CH closed vm. * repeat from * to * 3 times. 3 VP, 3 CH closed vm., 2 VP, 7 CH, 2 VP, we finish row 1 PBN (SS) in the third VP of the beginning of the row.

4th row: 1 PBN (SS) to start from the arch, 3 CH closed together, * 3 VP, 3 CH closed vm., 2 VP, 11 CH, 2 VP, 3 CH closed vm. * repeat from * to * 3 times. 3 VP, 3 CH closed vm., 2 VP, 11 CH, 2 VP, we finish row 1 PBN (SS) in the third VP of the beginning of the row.

5th row: 1 PBN (SS), 3 CH closed together, * 3 VP, 3 CH closed together, 2 VP, 15 CH, 2 VP, 3 CH closed vm. * repeat from * to * 3 times and 3 VP, 3 CH closed vm., 2 VP, 15 CH, 2 VP, finish row 1 PBN (SS) in the third VP of the beginning of the series.

6th row: 1 PBN (SS), 3 CH closed together, * 3 VP, 3 CH closed vm., 2 VP, 19 CH, 2 VP, 3 CH closed vm. * repeat from * to * 3 times and 3 VP, 3 CH closed vm., 2 VP, 19 CH, 2 VP, finish row 1 PBN (SS) in the third VP of the beginning of the series, and stop.

We make 21 such squares.

Triangle execution scheme

We start with a chain of 8 VPs, close round 1 PBN (SS) in the first VP.

1st p.: 4 VP for S2N, * 1 VP, 3 CH closed vm. * repeat from * to * 2 times, 3 VP, 3 CH closed vm., 1 VP, 3 CH closed vm., 1 VP, 1 С2Н.

2nd row: 4 VP for С2Н, 1 VP, * 3 CH closed together, 2 VP, 3 CH, 2 VP, 3 CH closed together * 3 VP, then repeat from * to * 1 time and 1 VP, 1 C2H.

3rd row: 4 VP for С2Н, 1 VP, * 3 CH closed vm., 2 VP, 7 CH, 2 VP, 3 CH closed together *, 3 VP, then repeat * up to * 1 time and 1 VP, 1 C2H.

4th row: 4 VP for S2N, 1 VP, * 3 CH closed in., 2 VP, 11 CH, 2 VP, 3 CH closed together *, 3 VP, then repeat from * to * 1 time and 1 VP , 1 C2H.

5th row: 4 VP for С2Н, 1 VP, * 3 CH closed together, 2 VP, 15 CH, 2 VP, 3 CH closed together *, 3 VP, then repeat from * to * 1 time and 1 VP, 1 C2H.

6th row: 4 VP for S2N, 1 VP, * 3 CH closed together, 2 VP, 19 CH, 2 VP, 3 CH closed together *, 3 VP, then repeat * to * 1 time and 1 VP, 1 C2H, then stop work.
We make 7 such triangles.

We add squares and triangles according to the assembly scheme. We make one row of sc around the shawl. We sew all the squares and triangles with a needle with a large eye. Next, we do the binding.

On the short sides of the triangle, we finish in this way:

1 PBN (SS) in 1 PRS, * 12 VP, 1 PBN (SS) in the sixth of these 12 loops to form a small ring, in the last one make: * 1 PRS, 2 VP, 2 CH and 2 VP *; repeat from * to * 3 times, finish 1 sc, then 1 sc (sl-st) in the 5th of 12 ch, 4 ch, skip 3 sc, 1 sc-1 (sl-st) in the next loop: * 5 ch, skip 1 p. , 1 PBN (SS) in the next loop * repeat from * to * 3 times, repeat from * to *.

On the large side of the shawl, do: * 1 PBN (SS), 5 VP, skip 1 RLS, always repeat from * to *, finish 1 PBN (SS).

We make "bumps". We collect 4 VP, close round 1 PBN (SS) in the first loop.
1st p .: 3 VP for 1 CH and 11 CH we pierce with a crochet round = 12 CH, finish 1 PBN (SS) in the third VP of the beginning of the row.

2nd row: 1 VP for 1 RLS and 1 RLS in each of 11 CHs = 12 RLS. We finish 1 PBN (SS) in the first VP of the beginning of the series.

3rd, 4th and 5th p.: 1 VP for 1 RLS and 1 RLS in each of the 11 RLS p. = 12 sc.

We finish the rows of 1 PBN (SS) in the first VP of the beginning of the row, stop working.

We stuff it, thread the thread into the loop of the last row, tighten until a small ball is formed.
We make tassels of 8 cm from 26 threads bent in half, fix 2 tassels on a cord of two threads of 4 cm and 1 tassel on a cord of two threads of 8 cm. That's all crochet shawls, the latest model is a beautiful shawl from a German designer.

We bring to your attention the most beautiful patterns for crochet shawls.

Openwork shawls, scarves on the head and shoulders look unusually feminine. Crochet looks especially stylish and beautiful due to the property of the knitted fabric to be airy and lacy. There are many schemes and patterns that are easy to perform even for beginner knitters. And if an experienced craftswoman takes up the matter, then the result of the work will exceed all expectations. Therefore, the above descriptions of crochet scarves with diagrams and descriptions will be useful for both beginners in knitting skills and craftsmen with a lot of knowledge.

Abbreviations for knitting patterns

For convenience and better understanding, the following designations are used in the description of the work:

• air loop - VozdPetl. (or V.P.);
• double crochet - PillarSNak. (or SSN.);
• single crochet - Pillar. b/nak;
• column - column. (or with.);
• chain - CEP;
• loop - P.;
• nakid (loop thrown over the knitting needle) - NAK;
• *…* - the pattern between the stars is repeated.

These designations apply to each of the presented schemes.

Openwork scarf

The kerchief was previously used at the end of the 18th century to cover the neckline of the karako (a jacket with long floors and semi-long sleeves).

To knit such a scarf (shawl), it is necessary to pick up about 300-400 g of pastel-colored threads No. 32/2 in 4 layers. The shawl pattern is a combination of two types of rhombuses, in one of which flowers are knitted, and in the other a net is knitted. The shawl is knitted from the bottom end, while knitting evenly expands on both sides.

Then you need to knit rhombuses in the amount of two rows, in which the flower is in the center, and rhombuses with a mesh and a flower alternate with each other. At the end of the work, the product is tied along the upper edge..

1. 1st p.: 3 Air loops., S. without draped P. in each chain of five air loops of the previous row.
2. 2nd p .: * Pillar Sak., 1 Air Loop. and so on from the asterisk to the end of the row (Pillar Snak. Use in turn for this either S. without the crochet of the last row, then a chain of 3 Air Loops.). Then they continue tying, while the thread is not torn off, the sides (those that are short) of the shawl are as follows: and so on from * until the end of the row. Next, you need to tie the work along the upper edge in the opposite direction with columns without a loop thrown over (the hook should be inserted under all the air loops of the previous row).

When the shawl is ready, it must be carefully ironed, trying not to crush the flowers from the wide columns; to decorate the shawl, fold the brushes from the threads in 16 - 20 layers, tie them along the edge of the work and interlace them at the same level. Such a shawl can be worn both on the shoulders, in the form of a cape, and as a scarf around the neck. Hook, diagram and description, not counting the threads - that's all you need to complete this work, because it is not difficult at all, and even beginners will enjoy the result.

Snow white shawl

A shawl is a strip of rectangular fabric that came from eastern countries, which served to cover the upper body from cooling. In the 15th century, in the Indian region of Kashmir, shawls were made from the thin wool of Tibetan goats. Authentic shawls spread throughout Europe during the Directory. They were an addition to the costumes, which imitated the antique version - gathered clothes, in which there were no sleeves and there was a deep neckline. Precious cashmere shawls quickly began to be replaced by more affordable fake options.

Such a shawl will require 250 g of white thread No. 26/2 in one layer. Hook size No. 3. The product includes 6 themes - squares and 4 themes - triangles. Each topic is knitted according to the scheme separately and is attached to an already connected topic - a square or a topic - a triangle as a result of knitting the extreme row (the joining points are indicated in the diagram).

Tie the finished work with the given pattern, knit only a mesh along the long edge of the shawl - S. without a crochet and 3 Air Loops between them. Do not forget to add P. in each row in the corners of the product, so as not to tighten the strapping strip. In the last row of strapping on the long edge, make the “picot” teeth from 4 Air Loops.

Scarf and gloves

Gloves at the beginning of the history of their appearance not only protected, but also adorned hands. Samples of these elements of clothing were found in the Egyptian pyramids of the 21st dynasty. Initially, the gloves looked like pouches with no openings for the fingers, and much later, a product similar to a mitten appeared.

In the Middle Ages, gloves were used, in which there were no compartments for the fingers, and they were similar to the current mittens. A leather version on a cloth lining, or gloves made of metal rings were part of the equipment of warriors and hunters. At the highest rank, this type of clothing was inlaid with jewels.

For the finished product, you need to take 200 g of yarn No. 32/2 of a light tone in 3 additions. To perform the work, a hook of size No. 3 is taken. The scarf will turn out to be about 22–26 cm wide, its length will be 140–150 cm.

The product should start from the center, i.e., tie the CEP. of 50 Air Loop. and then carry out the presented pattern (the result of the product will be three "fan" drawings in width) first in the first side, and then from the center of the work to the second side. Finish work on the two halves of the scarf with the second row of the pattern according to the scheme.

Next, the finished product should be tied in three rows in a circle, continue to knit "fans" along the edges of the scarf, while the hook is inserted from the first side of the work under a chain of seven Air Loops, from the second side under the Pillar. with 2 crochets. In the third row of processing, the teeth are from 3 Air Loops. make all over the "fan" of the last row (in each "fan" you get 9 teeth).

Alternatively, gloves can be knitted on 4 needles of the second size with a fifth extra to do the work in a way that is known to everyone as knitting a sock. Gloves will decorate four openwork strips of 3 facial P. each against the background of the wrong P. of the entire glove. To complete the openwork pattern, knit every 4th row in the following way: NAK., Three loops together, NAK.

Black shawl with colored stripes

At the end of the 40s. In the 19th century, the scarf was incredibly fashionable, but only in one color, as an addition to the plaid crinoline, which was very popular.

Material: 200 g of wool yarn No. 32/2. Hook No. 2.5 or No. 3.

The pattern is shown in the diagram, but the principle of its implementation is simple: 3 PillarSNak. form a combination, between them is a chain of 3 Air Loops.

So, the beginning of knitting is the middle of the wide side of the work. The dimensions of the product can be different, such as you need. Increases are made only in two places - on two sides of the center line emanating from the beginning of knitting.

• 1st p.: Knit a chain of 3 Air Loops, then perform 2 Pillars of Sak. on the first P. of this chain. Knit another chain of 3 Air Loops. and 3 SSN. on the same initial P. CEP., on which 2 PillarSNak are already connected.
• 2nd row: a chain of four Air Loops, two Pillars of Sak. in the first P. CEP. air loops, CEP. of 3 Air Loop. further above the CEP. of the last row, two groups of 3 Pillars of Sak., separated by a CEP, from 3 Air Loops are knitted - in this way, additions are made, this action is repeated further in this place in each next row. Next, perform the CEP. of 3 Air Loop. and 3 SSN. on the last P. of the last row.

As you can see, this knitting is simple. Between the colorful stripes - 3 rows, connected with black threads. The colors of the stripes are selected in various colors as desired.

The finished shawl must be tied with 2 rows of PillarsNak., and another option is a small border. The pattern of this border is shown in the diagram. Already at the end of the work, brushes are tied, the length of which will be 12-18 cm.

Openwork mohair shawl

Mohair is a fabric that was obtained by processing the wool of the Angora goat, long and thin, with a silky sheen. Mohair was brought to Europe from Asia Minor.

To get a beautiful and openwork shawl, you should take a thin peach mohair (other pastel color) - 100 g (in one thread), and 35 g of dark beige or another opposite shade of thread No. 10/2 (in one thread) for knitting trim. Hook size #3.

Knitting: the main pattern is given with a shawl pattern: CEP. of 5 Air Loops, fixed with two columns without a loop thrown over, between which three Air Loops are connected. (picot). The border is made with cloves - the knitting pattern is shown in the diagram.

The shawl is knitted starting with the Air Loop chain. the length of which is 160-170 cm (according to the scheme). Then you should knit on the CEP. through one P. Column Snak., and between them along the 1st Air Loop. (see row 1 of the main pattern diagram) - this way a “lattice” pattern is obtained. All further rows are knitted with the main pattern, while it is not necessary to knit 5 Air Loops at the end of each row until one chain of 5 Air Loops remains.

After that, it is necessary to tie a shawl on both sides with a “lattice”, and on it tie a border of 3 rows of the main pattern, ending it with the same “lattice”. After that, you need to tie a rim with cloves with a brown thread (see diagram). Finished teeth should be tied with b / NAK columns. pink thread.

To decorate the lower corner of the shawl, ruffles are made, which should be knitted from pink threads; and the cells that formed the main pattern must be tied on 3 sides (the direction of processing is shown in the diagram). All sides end as follows:

• 1 PillarSac.;
• 1 Pillar. with two NAK.;
• 3 Air Loop;
• 1 Pillar. with two NAK.;
• 1 PillarSac.

Tie the completed ruffle with a contrasting thread in one row with a b / NAC column.

Openwork shawl-kerchief on the shoulders

Most often, such products are knitted from the corner, and this shawl is no exception. First knit CEP. from fourteen P., then knit rows of the pattern.

Further, the work continues according to the scheme until it is possible to connect 2 rhombuses vertically - flowers, horizontally - 3. In the middle of the nineteenth row of work, the execution of the lattice from PillarSNak., and between the Pillar. - one Air Loop. At the beginning of all rows and at the end of the lattice, 2 Air Loops are knitted. and PillarSnak., while the hook is inserted under the Air Loop. past rows.

The remaining row is knitted Pillar. without a crochet, and the hook is also inserted under the Air Loop. and under the hinges Pillar. The edges of the work are processed by the CEP. 5 P. in each and Pillar. without NAC. (Introducing a hook under the Pillar and CHAIN.). to each CEP. impose tassels of thread 9-11 cm long.

From above, the edge of the work is processed by the Pillar. without NAC. and halves of rings from three Air Loops.

At the end of the work, the shawl must be washed and dried in a towel. Then pull on a frame with wooden pegs that replace the carnations (it is possible to use a carpet for this, which should be covered with a light-colored cloth). Pin the finished work to the carpet with pins and give it the necessary outline. It is worth tying brushes only when the product is washed. If, nevertheless, there is a need to wash the shawl together with the brushes, then after washing the brushes must be carefully straightened with a comb with rare teeth.

Knitting products for girls

The scheme of this product can be applied both from above and from below (from the corner). It will not be difficult to perform two patterns of a knitted scarf with a hook to choose from.

To start knitting scarves from above, perform (diagram 1) CEP. of 8 loops and close it into a ring, then knit the rows of the pattern, placing them in both directions.

• 1st p. - 6 Air Loops, 1 Pillar Sac, 2 Air Loops, again 3 Pillars. and 2 Air Loop. between them, 2 Air Loops., 1 column with 2 NAK. When knitting all Pillar. the hook is inserted into the ring from the Air Loop. Then the work should be turned inside out.
• 2nd p. - 6 Air Loops, 2 Pillars under the 1st CEP., 2 V.P., 2 PillarSNak. under the 2nd CEP., 2 air P., 2 Pillar Sak., 3 Air Loop., 2 Pillar Sak. (beam) under the 3rd CHAIN., also 2 times 2 Pillar. under the 4th and 5th (from 6 loops) CEP., 2 V. P., 1 Pillar. with 2 NAC. under the same (last) CEP. Rotate the product.
• The 3rd and all other rows are knitted similarly to the 2nd row.

The kerchief can be made in the size that suits you from threads of various colors: for children - on the head of a smaller head circumference, for women on the shoulders and neck of a larger size with the addition of tassels.

A scarf in the form of a combination of lattices with flowers is made from the bottom corner (scheme 2). To begin with, make a CEP. of 12 Air Loop. and rows of drawing according to the scheme.

The scarf is treated with PillarSNak. and in the form of a grid. Threads for brushes are pulled into the lattice cells. The length of the brushes is 20 cm.

Attention, only TODAY!

Hello, dear mothers, aunts, grandmothers, sisters, in general, all those who have a little princess at home! Summer has come! The sun is shining brightly, everything is blooming around, the birds are singing ... the mood is such that you want to sing! Imagine how the children rejoice at the arrival of summer! And try to keep them at home! In warm, summer weather, they are ready to be outside all day! Play, run, swim - enjoy your childhood! But, caring mothers, one should not forget that in the summer the long-awaited sun is quite insidious and children definitely need a light headdress. And what it will be, it all depends on you, and of course on the desire of your little fashionista.

My youngest daughter is very capricious in choosing hats: “I don’t want it, I won’t, it’s uncomfortable ...”, probably, many mothers are familiar with this situation. Putting a hat on her, a cap is generally impossible. After all, as far as you know, all children's hats for girls are made with a thin elastic band under the neck so that the headdress is not blown away by the wind. So, it is this rope that does not give my child peace. And so, we decided to knit a scarf with our own hands. We chose a yarn, picked up a model ... and started making a masterpiece.

When the work was completed, the result exceeded all expectations. The kerchief turned out to be light, openwork, tender. Crocheted products always look much more elegant. And how much joy the daughter had, simply cannot be conveyed! She was spinning near the mirror, not taking her eyes off the scarf, she didn’t even want to take it off.

Try crochet a scarf for a girl and see how your beauty will transform. The scheme is simple, you will need very little yarn. I bought two skeins, white and blue. The yarn is still there. Enough to tie two more scarves. It takes about 3-4 hours to make a crochet scarf. In 3 hours with your own hands, with the help of a hook and thread, you will create a wonderful thing that will surely please even the most capricious fashionista. Well, let's get started?

Necessary materials for knitting scarves:

• 1. White cotton threads ("Coco") - 50 grams;
• 2. Cotton threads of blue color ("Openwork pekhorka") - 50 grams;
• 3. Hook 1.5.

Note: the yarn can be different, the main thing is that it be made from cotton threads. If the yarn is thicker and more voluminous, then the scarf will gradually turn into an autumn hat. And if the thread is too thin, then the scarf will look like a cobweb and is unlikely to cover from the sun's rays, and it will lose its appearance.

How to knit a summer scarf for a girl?

Before you start crocheting a scarf, take a centimeter and measure the volume of the child's head, so it will be easier to navigate with the size.

I found a knitting pattern on the Internet, in principle, how to knit is clear. Start over. On the hook with a white thread we collect a chain of 4 air loops.

We combine the chain into a ring, fasten it with a connecting loop.

We knit the first row according to the scheme.

Then the second. At first, the drawing seems complicated and incomprehensible. But, later it will be much easier when the drawing system is visible.

We knit the third row.

Next 4, 5 rows.

In the same way, we knit all subsequent rows according to the scheme.

So, the number of rows in the figure (rapports) depends on the volume of your child's head and on the desired length. I got about 16 rows. For a girl two or three years old.

We fix the white thread. We cut. We add blue. Now we tie the edges of the product also according to the scheme. Although, you can tie in any technique, this is a matter of taste.

To make the product look more openwork, it is better to make arches of three air loops in every second loop of the previous row in the last row of the strapping.

The central part of the scarf can be tied simply with arches of air loops.

The scarf is an important element of the wardrobe. For little girls, they are knitted not only to protect them from the scorching sun and windy weather, but also as a charming headdress. Complete with a beautiful knitted dress, a scarf in the same style will look great. Also, this thing will be an excellent women's accessory as a headdress and neckerchief. This article contains information on how to crochet a children's and women's scarf, a pattern and description of knitting, different models and types.

Children's options

Scarves for a girl can be of different models. All of them fit very simply and this process does not take much time.

For summer models, it is better to take thin cotton yarn. They are thin and not hot. For cool weather, bamboo and wool mixture are suitable. Before starting work, you need to make sure that the threads are not prickly.

Traditional triangular scarves look great. You can knit them from the corner, from the middle or sew from two knitted triangles.

On such products, you can make ordinary ties from laces or ribbons. Also, a convenient model is obtained if, instead of ties, an elastic band is made.

For knitting such models, classic patterns are used. For beauty, you can make an openwork harness. Ties can be made like laces. If the kerchief is attached with an elastic band, then the elastic band is tied around the edge in a circle to the classical scheme.

Another interesting version of the scarf is bandages. These models are very beautiful and unusual. They fit snugly and hold up well. It is very easy to knit them. It is enough to choose a beautiful pattern and make a knitted strip of the desired width and length. Consider the length minus 6-7 cm. Then tie an elastic band and decorate as desired.

To knit these bandages, you can use the following patterns.

When knitting children's outfits, threads often remain. If you make a scarf out of them, then the kit will look very fashionable.

For a little princess

A master class with step-by-step photos and a detailed description will help to knit an openwork scarf for a girl.

Knitting pattern for this wonderful thing:

Yarn and hook need to be taken thin, number 1.5.

Knitting will start from the center.

It is necessary to knit nine air loops.

Then you should make a yarn over and grab the thread through the fourth loop of the chain. So there will be two loops on the hook.

Now you need to bring the hook through the extreme loop of the chain and complete the started double crochet.

Next, you need to turn the work over and knit 3 air loops and a double crochet. Then we make 2 more air loops and a half-column into a ring. Now there are five air loops and one half-column in the ring. Once again, five loops and a half-column in the ring. And then again five air loops and one half-column in the ring. We complete this stage with two air loops and two double crochets.

We do the next step like this: we knit three air loops for lifting and one double crochet. We make three air loops and a half-column in the fifth loop of the previous row. Now five more loops and a half-column in the fifth loop of the previous row. We make three half-columns and five air loops in this arch of the third half-column. Then five air loops in a half-column and an arch of three air loops, two double crochets. The second stage is over.

The next step is knitted according to the scheme. Lush columns are made with two crochets. Five air loops are knitted between them.

The next step will be tying the element with half-columns.

According to the scheme, we make the strapping with half-columns as shown in the photo below.

The next rapport of six fans of 15 columns with two crochets in each.

Strapping again and we begin the next rapport of eight fans of six magnificent columns in each.

We alternate rapports of fans from columns with two crochets and from lush columns to the desired size of the scarf.

We finish the fabric of the scarf with a beautiful strapping of a different color.

We turn to knitting laces. Knit chains from air loops of the desired length.

We tie the edge of the scarf with single crochets and fasten the chain with a connecting post. We start the next row from the end of the chain. We make a strapping from columns without a crochet. At the junction of the cord with the fabric, we knit a single crochet, then a half-column with a crochet, again a single crochet and continue tying the scarf with single crochets.

We reach the next edge of the scarf. We make a single crochet, a half crochet. We continue tying the lace with single crochets. We start the next row from the end of this lace. We tie with columns without a crochet. At the connection with the canvas, we again repeat the alternation of a single crochet, a half crochet and a single crochet. We make the binding of the scarf from the alternation of two columns with a crochet and two air loops. Thus we tie up to the next lace. At the connection of the single crochet, half double crochet and single crochet we tie the cord to the end.

We tie the last row with single crochets. On the joints we make alternation with half-columns with a crochet. Laces are ready.

At the end, we tie the scarf with threads of a different color with a “crustacean step”. Now it needs to be washed, dried and steamed.

Steam on an ironing board. We fasten the scarf and laces around the entire perimeter with sewing pins. We make a slight tension, straightening the scarf gently. Then we turn on the iron in the hottest mode with steam supply. Hold it without touching the scarf, for a few seconds over each area.

The finished scarf looks very neat. The last touch remains - to attach a decorative ornament.

Women's jewelry

Women's knitted scarves can be worn not only as a headdress, but also as a scarf or scarf. Such a scarf around the neck is called baktus. This wonderful wardrobe item for a woman will become not only protection from the weather, but also a stylish addition to the image.

A video tutorial will help you create such a beautiful scarf with your own hands, which describes in detail all the stages of knitting the fabric, the color transition, as well as the strapping.

Thin openwork scarves are perfect for going to the beach and protect from the sun in the summer heat. They are knitted from cotton yarn.

For walks in autumn and spring weather, a scarf will also be appropriate. It is better to knit it from bamboo or wool mixture. It is desirable to choose knitting and yarn denser.

The neck scarf can be worn in many ways. Laid like a scarf around the neck, it will not only warm, but also look very beautiful and stylish. It can also be worn over the shoulders like a shawl. This way of wearing a scarf will give the image of femininity and charm.

The diagrams below will help you knit magnificent scarves with your own hands.

Video on the topic of the article

In the selection of videos, you can clearly see how to knit beautiful children's and women's scarves, baktus and shawls.

This type of headdress, in principle, is suitable for almost any outfit. See job description below.

We need yarn of the right colors, hook number 2.

Detailed MK with a job description for beginners

To begin with, we make a chain of 122 air loops (the length of the initial rows of the scarf is regulated independently, but the number must be divisible by 3 + 2 loops for the pattern).

Schemes for them:

You can also decorate the finished product with flowers, the schemes of which you will find,.

At the end of knitting the fabric, you need to start tying our product.

The strapping of two threads will look beautiful and original.

The binding takes place according to the scheme provided above. Loops for ropes are not left.

In order to make a strapping, the rim of the scarf is knitted in sirloin stitch, while leaving the same gaps between the double crochets. Fillet knitting is done in five rows.

Having knitted these rows, you can start knitting ties. Without tearing off the thread, decreases are made obliquely. Three rows are made of five squares and three more rows are knitted without decreasing. Then reductions are made obliquely again, one of the three squares remains. Thus, a tie of the desired length is knitted with one square.

You can add knitted flowers or bows to such a scarf, decorate with beads or sequins, as in the photo above.

See video tutorials for more details.

We create comfortable decorations for a baby 1.5-2 years old

We will need: about 20 g of yarn of the desired colors and hook No. 2. To begin with, 111 air loops are dialed and three rows are knitted with double crochets. Next, 33 rows are knitted with the pattern indicated in the diagram in the photo.

Knitting occurs by decreasing on both sides in an odd row, one column, and in an even row, two columns. After that, 13 columns should remain.

The kerchief for the baby is tied on two sides with one row of single crochets and a second row of single crochets with “pico”. The upper edge of the scarf is tied with one row of single crochets with "pico".

Such a scarf can be decorated with flowers on both sides or make a strip of flowers and sew to the scarf.

Be sure to watch the tutorial videos.

We make a headdress from triangles for every day

We will need: yarn of any color and hook number 2. Variants of patterns from triangles you can see in the photo below:

To perform such patterns, they need to be knitted with a fillet pattern. Repeat once from the first to the tenth row, after that you need to repeat from the fifth to the tenth row.

For an empty cage, you need to knit one column with a crochet, one air loop and skip one loop. For a filled cell, you need to knit two double crochets. Then, replace the first double crochet of each row with three instep chains, and finish with one additional double crochet in the topmost instep chain.

To get started, you need to tie a chain of three air loops, adding three lifting air loops. Then knit with a pattern of triangles. After 66 rows, knit a row with single crochets. Congratulations, the job is done.

We create a simple scarf from volumetric flowers

Such a scarf, made of individual parts, will look original. Let's say right away that this option is not particularly suitable for beginners because of its complexity. For example, you can knit a scarf from lush flowers.

To do this, you will need: yarn of the desired colors, a needle for stitching parts, hook number 3.

Each flower is obtained an example of 5 cm in diameter.

Sentences marked with *…* are considered combinations.

Step-by-step MK with a description of the process

To begin with, we collect 4 air loops and connect them into a ring with a connecting column.

1 row. One air loop, 12 single crochet - in the ring.

2 row. Take another color and knit the connecting column into the first loop, then knit 3 air loops and make a yarn over, then * insert the hook into this loop, grab the thread and pull out the loop * to the height of the initial three lifting loops, one loop is ready. Then repeat this combination twice, then yarn over again, insert the hook into the next loop and grab the thread, then pull out the loop. Then repeat the combination twice again. After that, grab the thread and pull through all the loops on the hook. And one flower petal is ready. An example of a petal in the photo.

The rest of the petals fit in the same way. There should be six petals in total. Knit the last connecting column in the same loop.

You can connect flowers simply by tying them together, and you can also make a small mesh. Ties for a scarf can also be made from flowers and by knitting several air loops and tying them with single crochets.

An interesting accessory made of bright hearts for a baby

To do this, take the yarn of the desired color and hook number 2.

1 row. 4 air loops are dialed, a connecting column is knitted into the 1st air loop. Next, 3 air loops are cast on and knitted according to the slipper pattern: 2 double crochet, 3 double crochet, 1 air loop, 1 double crochet, 1 air loop, 3 double crochet, 3 double crochet, 2 air loops , a connecting column in a ring.

2 row. Chain 3, single crochet, 2 single crochet from 1 stitch, 3 single crochet.

For sharpening, knit in the column of the 1st row located between the air loops in this order: 2 single crochet, 1 air loop, 2 single crochet, 3 single crochet, 2 single crochet from the first loop, 2 single crochet.

At the end, knit 2 air loops and a connecting post.

Hearts are obtained as in the photo:

Connect the hearts together with a thread or knit a simple mesh.

We hope your products turn out as wonderful as you wanted! Good luck in your work and continuous inspiration!

Free video tutorials for beginners

See how to make an openwork scarf, it's very simple: