If you miss summer, the sun, the beach and, moreover, know how to do something with your own hands, then this master class is especially for you, in which you can learn how to make a palm tree with your own hands. It is very simple, takes a minimum of time and a small amount of consumables.

For this you will need:

A small amount of green beads, preferably transparent;

Roll of copper wire;

Wooden stick with a height of 15 centimeters.

At the very beginning of work, you need to unwind a small piece of about a meter from a coil of wire. We string 5 beads on it and place them exactly in the middle. Then you need to leave the first bead, and thread the wire through the next 4 beads again.

In the same way, we attach a couple more of these leaves on the sides.

Next, you need to make a small gap between them. To do this, using the parallel weaving technique (see the next picture), we weave one bead, and then, in the next row, another one, and then until the end of weaving the entire palm branch, after each pair of leaves we will get a gap from single rows of beads.

We continue weaving to the required height. The finished sheet looks like this.

We use these two patterns to make leaves.

There should be 6 of them in total. You can weave leaves without diagrams, since the principle of the robot is described and you can easily experiment. When all the leaves are ready, we begin to make the trunk. To do this, take a stick no more than one centimeter thick, but with a solid structure. We wrap wire to the top of our stick, first those smaller sheets in a circle, and then, in the same way, those that are larger.

Now we can design the trunk itself. We wrap it with yarn of a suitable color on the palm tree. Near the leaves you can stick coconuts made from plasticine. Place this whole creation in a special glass with plaster, or you can make something like a stone out of plaster, placing a trunk there and decorating it with small shells from the sea. When everything dries, a piece of summer will settle in your home.

Have fun and have a good time!

This cute beaded palm tree with bananas gives off a summer vibe. If you are planning to get into beading, this tree will be an excellent option for your endeavors. It's very easy to make.

Materials

• Beads of green, yellow and brown colors No. 10;
• coil of wire 0.3 mm.

In the product presented for the master class, larger beads were used to make a palm tree trunk, but it is better to take the same ones, visually such a palm tree will look more elegant.

Step 1. Making leaves

The palm leaves will be produced in three different sizes. All of them will need to be woven using the parallel weaving technique.

Small leaves. You will need four of them. The weaving pattern is as follows:

• from the first to the fifth row - the corresponding number of beads;
• sixth row – four beads;
• seventh - three;
• eighth - two;
• ninth - one.

Medium leaves. They also need to be made in four copies. Scheme:

• first row – one bead;
• second, third - two each;
• fourth, fifth - three each;
• sixth, seventh - four each;
• eighth, ninth - five each;
• Next you need to go for a reduction, in the same order you should reduce one bead for every two rows;
• The twentieth row is the final one - there should be one bead in it.

Large leaves. Five pieces. Scheme:

• first row – one bead;
• second, third - two each;
• fourth, fifth - three each;
• sixth, seventh - four each;
• eighth, ninth - five each;
• tenth, eleventh - six each;
• twelfth, thirteenth - seven each;
• then you need to go to decrease, in the reverse order;
• The twenty-fourth row is the final one; one bead is taken for it.

Step 2: Making Bananas

First you need to take two pieces of wire, each 30 cm long. Both should be passed through one yellow bead. It needs to be installed exactly in the middle, the wires should form the letter “X”. 10 yellow beads should be strung on each end of the wire.

All four ends of the wire must be threaded through another yellow bead.

Pull the wire tight. So, you get a bunch of bananas.

In total, you will need three such clusters, which need to be combined into one large one.

Step 3: Assembling the Banana Tree

Take a piece of wire 50 cm long, pass it through a large sheet, twist them.

Use the next ball to attach the middle leaves of the palm tree.

The last ball of leaves is the smallest leaves.

Now it's time to secure the big banana bunch.

At the top of the palm tree, fasten a long piece of wire, string brown beads on it and tightly in a spiral, leaving no gaps between the turns, begin to wrap the entire trunk.

Fasten the wire at the bottom, cut off the excess.

The palm is ready! Can be mounted on any base for crafts.

In this article we will continue to describe the technique of weaving beads of various trees. This time we will bring to your attention master class on making a tropical palm tree with your own hands. This is the simplest thing you can make from beads. You will see this from your own example. But the tropical palm tree will remind you that it’s time to go on vacation to hot countries. And for those who have already swam at sea, this will be a pleasant memory of past summer days. So, prepare all the necessary materials and you can start beading.

To weave one palm tree, you will need the following list of materials:

In order for the palm tree to be fluffy, it must be woven in three tiers and branches of different shapes and lengths. The first row will consist of six or seven leaves, which have six pairs of needles. The next two rows will involve twelve leaves containing eight pairs of needles or even ten. One large palm leaf can take up to ninety centimeters of wire, a medium one will need eighty cm, and a short one will need seventy centimeters.

Weaving palm leaves

Having prepared the materials in front of us, we proceed to a set of seven green and two brown beads. Leave one and thread the edge of the wire in the opposite direction through the eight pieces. This will be the top of the leaf. Similarly, weave two more needles on the right side and on the left. To do this, take only five green beads.

Twist the base material 2 or 3 times and insert one emerald bead.

Then you should repeat the previous steps to weave the required number of needles for the palm branches. Twist the wire ten times, and place another ten green pieces of glass on the formed leg.

To give a branch a truly similar shape, you need to bend two or three pairs of needles towards the central one. In the photo you can see the easiest way to do this on your finger.

Weave the required number of leaves. Look at the photo to see what they should look like.

Palm tree assembly

Now let's start assembling the tropical tree itself. Cut the thick wire into five lengths of forty centimeters each. After this, these elements should be tightly wound with thread on one side, as in the picture. To prevent the edge of the barrel from being sharp, you can melt a small piece of plastic and dip the workpiece in it. Place palm leaves in the first tier around the trunk.

In order to close the conspicuous hole in the center, you need to wrap a thread crosswise between the leaves in several layers.

Tighten and straighten any pieces that may have slipped. Then, using gentle movements and very tightly, wind the thread around the barrel, going down three centimeters. Step back ten mm from the first row. And alternate foliage of different sizes, attaching a second tier. Back off another ten mm. and wrap the third row of greenery.

Bead weaving is a very exciting activity. You can create unique compositions to decorate your home. For example, a beaded palm tree will serve as a wonderful addition to your interior. The weaving pattern is not complicated and is accessible even for beginners.

The finished palm tree can be decorated with banana bunches or coconuts and placed in a beautiful stand. The composition of 3 palm trees looks especially beautiful. So that you can create such a palm tree with your own hands, we have compiled a master class with photo materials on weaving a palm tree with banana decoration especially for you.

We weave a voluminous palm tree from beads in a step-by-step master class

To weave a banana tree from beads we will need:

Beads made of colored glass of the same size. You will need green, yellow, brown.

1. Thin wire, it is better to take 0.3 mm in diameter.
2. Wooden stick or pencil
3. Thick threads

To make leaves for our palm tree you need to take about 70 cm wire and green beads. We need to make the leaves different in length, like a real palm tree. This will make the palm tree look more beautiful. You can weave leaves in two ways - using the coral technique and parallel weaving. To weave leaves using the parallel weaving technique, the following diagram will help you:

The smallest

1st row: 1 bead;
2nd row: 2 beads;
3rd row: 3 beads;
4th row: 4 beads;
5th row: 5 beads;
6th row: 4 beads;
7th row: 3 beads;
8th row: 2 beads;
9th row: 1 bead.

This way we make 4 small palm leaves.

The middle leaves are made according to the following scheme:

That is, one bead is added every two rows; when we reach the 10th row, we string 6 beads and begin to decrease the number, one every two rows. In total you need to make 20 rows in this way.
Make 4 medium palm leaves

Large palm leaves need to be woven in the same way as medium ones, only the number of rows used increases. In total you need to make 24 rows. That is, in the 12th and 13th rows we will use 7 beads each. We need to make 5 large palm leaves.

To make leaves using the coral technique, you need to collect the required number of beads on each “needle” of the leaf. For each leaf we make a stem several beads long and leave a free tail, for which we will attach the leaves to the trunk.

Now you need to bend the leaves a little to make them look like real ones.

To create an imitation of a bunch of bananas, take 2 pieces of wire 30 cm each. We thread 1 yellow bead through both pieces of wire and lower it down 15 cm, that is, to the middle. We take another 40 beads and thread 10 pieces onto each end of the double wire. We roll it in the shape of a sickle and finish weaving the bananas by threading the last bead through the 4 ends of the wire and tightening it tightly.

We make three such bundles and weave them together. (you can do more if you wish)

For the stem you need to take an ordinary thin stick (wooden or bamboo) or a wooden pencil.

1) Connect the large leaves all together.

2) We fix it on the palm tree trunk at the very top. You can attach it by wrapping the wire around the trunk, but it is better to wrap it tightly with a thick thread.

3) Just below we attach the middle leaves one at a time, and even lower we need to place the smallest leaves. We also attach banana bunches using thread or wire.

4) Now we need to decorate the trunk of our palm tree with beads. To do this, we tie the trunk of our palm tree with brown beads. Take a long piece of wire and string brown beads onto it. We wrap the trunk of the palm tree tightly (possibly in several rows) with wire with beads strung on it. It is necessary that the base of the trunk does not show through. Now we carefully secure it, if possible, hiding the ends.

We cut off the remaining wire from the bottom. We place our tree in the stand and straighten it. If desired, the base of the palm tree can be decorated with colored pebbles and shells. Our unique palm tree woven from beads is ready.

It is not necessary to strictly follow the pattern; you can vary the number of beads at your own discretion, changing the length or thickness of the product.

Video on the topic of the article

We also invite you to watch a selection of detailed video lessons that we have selected for you on the topic of weaving a palm tree from beads, which may be useful to you.

A handmade beaded palm tree will be an unusual decoration for a room or a gift for a loved one. A beautiful exotic tree is woven in a variety of ways: needle weaving, parallel and loop methods.

This master class prepared for beginning needlewomen to make a tropical tree step by step with their own hands using a loop technique.

Preparing for work

To make a palm tree about 35 cm high, we will prepare the following materials:

• a 40 cm piece of copper or any other rigid wire with a cross-sectional diameter of at least 1 mm
• about 30 m of sufficient soft wire with a cross-sectional diameter of no more than 0.3 mm
• beads green and brown
• large beads 5-6 pieces
• floral tape
• toothpicks
• pair of wooden sticks about 40 cm
• container for wood
• acrylic paints

Video master class “Beaded coconut tree”

Step-by-step instructions

We take a piece of soft wire about 1.5 m and string beads on it, leaving a free edge of about 40 cm. We wind a wire strung with beads onto a piece of elastic wire to the end with the free end.

Separate approximately 3 cm of collected glass beads and fold the loop.


The wire at the base of the loop from the trunk must be twisted several times around its axis so that the beads on the branch are held tightly and do not fall apart.

In this way, we continue to create leaf segments until the branch size is about 10 cm. Having made 10-15 branches, we begin to assemble palm branches from them.

We twist the finished twigs into a bundle of 3 pieces using tape.

We collect the resulting 2-3 bunches together and connect them together in the same way as individual branches - with floral tape and inserting wooden sticks between them.

Continuing the winding around the branches, we insert toothpicks around the resulting trunk to give our palm the shape of a real tree.
After all the branches are collected together, it is necessary to branch the roots for stability and carefully straighten all the branches to the sides and bend downward, but not too much. Because the branches of the palm tree are arched in appearance.

Making coconuts for a tropical palm tree

Let's move on to creating coconuts with which we will decorate the palm tree. We take several large beads and brown beads prepared in advance and cut off a soft wire about 30 cm long. We pass the wire through the hole of the bead and string brown beads about 2.5 cm long on one side.

We thread the end of the wire on which the beads were strung through the hole of the bead in a loop. We repeat these loops until the beads cover the entire bead.

You can secure the resulting coconuts using a glue gun. We fix the tree itself in a plaster mortar or a plasticine stand. After the base of the finished souvenir has hardened, it can, if desired, be decorated with acrylic paints or gouache.

This will be an original and pleasant gift for your loved ones, will complement the interior of any room and will not leave anyone indifferent. Will create an atmosphere of comfort, warmth and summer mood! I wish you success in your creativity and new achievements in your needlework!