A knitted scarf is a product that everyone needs. It will not only protect you from the cold, but also add style and elegance. Let's look at what models of scarves can be crocheted.

Stylish option from Drops

A spectacular pattern for experienced craftswomen.

An unusually beautiful design for a women's crochet scarf in burgundy color is offered by the Drops studio.
Dimensions: 20 by 170 cm.
You will need:
— Alpaca Drops yarn (100% alpaca, 180 met/50 g) — 350 grams;
- hook No. 4.5.
Density: 14 p. = 10 cm

Attention! Instead of the first double crochet, knit 1 chain stitch, instead of a double crochet stitch - 3 chain stitches, together with a double crochet stitch - 4 chain stitches.

Tip: when knitting a st. s/n over a st. s3/n, insert the hook into a st. s 3/n; when you knit a st.s/n over a picot in a fancy pattern, insert a 2/n between the sts. When knitting a picot, make sure that the teeth are on the right side.

Knit a fantasy pattern according to the pattern.
Apply the relief pattern to those loops that are not included in the fancy pattern. Knit the pattern as a continuation of the fantasy pattern. Fig., i.e. after st.s/n fantasy. rice. also knit dc in a relief pattern. If in fantasy. rice. fans go, in relief make a treble with 3/n.

Description of crochet scarf:

1. Cast on a chain of 33 chain stitches. plus 3 p. rise. Work 1 stitch with 2/n in the fourth stitch from the hook, 1 stitch with 2/n in the next two chain stitches. * skip 1 chain stitch, 1 chain stitch with 2/n in the next four chain stitches. * - repeat from * (=28 stitches).
2. Then continue like this: 1 stitch with 3/n in the first 3 stitches with 2/n, 9 stitches in fancy pattern, 1 stitch with 3/n in the next 4 stitches, 9 stitches in fantasy pattern, 1 stitch with 3/n in the next 3 p.
3. When you knit a scarf with a height of 170 cm, end the stitch with 2/n in each stitch.
4. Tie around the entire scarf for finishing, starting from the corner: * 1 treble crochet, 2 chain stitches, skip about 1 cm * - repeat from *.

Source: www.garnstudio.com

Spectacular scarf model with tassels

Scarves knitted from medium-weight yarn in openwork knitting are very popular. The crochet scarf pattern is shown in the diagram.
Size: 31 x 225 cm
Required:
— Schachenmayr Silenzio yarn (50% acrylic, 25% wool, 25% alpaca, 60 met/50 g) — 400 grams;
- hook No. 7-8.
Repeat the pattern according to the diagram 1 time from the first row, then only 3-6 rows.
Density: 1 repeat = 10 cm

Crochet scarf pattern:

1. Start with a chain of 25 chain stitches. plus 1 p. for lifting.
2. Knit according to the 225 cm pattern, ending with the 6th row.
3. Make brushes. To do this, cut 6 pieces 60 cm long each. Fold in half and tie on each side.

Scheme of a scarf with tassels.

Long scarf with pompoms

The basis for knitting a women's scarf is cones of elongated loops crocheted. The scarf is decorated with pompoms, which add charm and completeness.

Calculation for 2 sizes: 25 x 190 cm and 35 x 265 cm.
Necessary:
— Phil Nuage yarn (72% merino wool, 28% polyamide, 148 met/50 g) — 250/450 grams;
- hook No. 7.
Density: 5 horizontal. repeats = 12 cm

Crochet scarf diagram and description:

1. Tie a chain of 32/47 chain stitches. and knit the cones pattern according to the pattern.
2. When the length becomes 190 cm (= 95 rubles) / 265 cm (= 133 rubles), finish the work.
3. Make 14/22 pom-poms with a diameter of 5.5 cm and attach them to the edges of the scarf with threads in two folds of different lengths: 2 tassels on a thread with a segment of 30 cm and 2 - 20 cm.

Simple scarf for beginners

Beginning craftswomen are often afraid of complex patterns, but at the same time they want to knit something spectacular. If you take a textured thread, then even a very simple pattern will look chic. For example, a multi-colored simple scarf for beginners crocheted from fluffy yarn with a different thickness effect.

Scarf dimensions: 51 x 200 cm.
Prepare:
— yarn Linie 286 Topaz (75% sheep wool, 25% polyamide, 110 met/50g) — 100 g each of khaki, blue, gray and purple;
- hook No. 6.
Knit the scarf in column s/n, start each new row with 3 chain stitches. rise.

How to crochet a scarf:
Using khaki yarn, knit a chain of 220 chain stitches. plus 3 sts for lifting and knit in single crochets, alternating colors like this: 10 r. khaki, blue, gray, purple.
Source: “Knitting is your hobby” magazine

Scarf pattern

The pattern for the next scarf looks complicated at first glance. But actually it is not. It consists of one technique, but the hook is inserted alternately 3 rows below, 2 rows, 1 row. A step-by-step photo master class on crocheting a scarf is presented for you. In this way it is possible to knit a blanket, stole, or collar.

Crochet a scarf using a crochet stitch. To get a ladder, knit 1 row once every 5 rows. , inserting the instrument 5, 4, 3, 2, 1 p below.

For the stronger sex

The following pattern with a description is a warm crocheted men's scarf, crocheted with an interesting pattern. However, the pattern is also suitable for women's products. It's called Megapolis. The name speaks for itself; this is an excellent urban option for a classic men's coat or jacket.

You will need:
— Alize Cashmira Fine yarn (100% wool, 450 met/100 g) — 300 grams;
- hook No. 2.
Dimensions: 30 x 150 cm.

Knit a sample, from which calculate the required number of loops (multiples of 5 plus 3 additional air stitches to distribute the pattern in the fabric - 16 repeats). Next, do 1 more stitches. for lifting and start knitting the pattern according to the pattern. Perform from the 1st to the 6th row, then repeat from the 3rd to the 6th row. until the length of the products reaches 150 cm.

Beautiful openwork

There are never too many openwork scarves in a woman's wardrobe. Another option made from 100% wool. Although, if you knit this model from viscose or cotton, it will be just as beautiful.

Prepare:
— Lama yarn (50% llama wool, 50% sheep wool, 120m/100g);
- hook No. 4.
Make a chain of 37 vp. plus 3 ch. for lifting and knit 84 rows according to the pattern. If desired, make fringe. To do this, cut pieces of 2 threads 17 cm long, fold them in half and fasten them along the short sides.

Knitted scarves are always in trend, especially with the onset of cold weather. Everyone wants to have a unique and beautiful warm scarf. Today we will look at different patterns and descriptions of knitting scarves for all occasions. In order to crochet an openwork scarf we need: hook, yarn, scissors.

How to crochet a scarf master class for beginners

An openwork scarf is a trendy accessory for the wardrobe of any fashionista. Our lesson will describe in detail a master class on creating an openwork scarf for beginners.

In order to knit this fashionable accessory, we will need: yellow thread - 200 g (2 balls), a hook, a large gypsy needle and scissors. We have made very simple patterns for you especially for beginner needlewomen. Under each photo there is a detailed description of the knitting process. First, let's take a look at the knitting pattern.

Scarf knitting pattern

There are universal conventions for crocheting. Let's explore what these symbols mean:
1. Air loop (v.p.)- chain. Chain of v.p. is the basis for any knitted product. Tie v.p. very simple: take the working thread on the index finger of the left hand, pass the hook under the thread, turn from left to right, thereby forming the first loop. Next, we hook the working thread and pull it through 1 ch, thus knitting one loop after another to form a chain.

Popular articles:

2. Connecting post (s.st.)- used for knitting the final row, as well as connecting individual parts. Pull the working thread through 2 loops at once.

3. Half column (half column)- Throwing the working thread over the hook, insert it from the front into the 3rd loop, and pull the thread through all 3 loops, as a result, one loop remains on the hook.

Let's get back to knitting our scarf. Length of our scarf: 18 cm * 170 cm. For work we need to purchase: yellow yarn (cotton) - 150 g, hook No. 2.

We collect a chain of 73 vp.

1 r.: in the 4th loop from the edge we knit a dc, then in every 5 vp. we continue to do st.n. to end

2nd row: at the end of the 1st row, knit 1 ch. lifting, in the first loop of the base we make 1 st.b.n.

Then we knit 5 vp, 3 vp. we skip and in the 4th we knit 1 dc, then we knit a picot from 3 ch, then we do 5 ch again,

We skip 3 loops and in the 4th we knit 1 dc, repeat the pattern from picot to the end of the r.

3rd row: 5 ch. (3 v.p.+2 v.p. according to the scheme), then st.b.n. on Wednesday. n. arches pre.r. + 5 v.p., st.b.n. on Wednesday loop next arch before R. , + pico from 3 vp, again 5 vp. and senior biological sciences on Wednesday. loop trace arches Next 5 v.p., st.b.n. on Wednesday. p. next arches, picot from 3 v.p., 5 v.p., st.b.n. on Wednesday. p. next we repeat the arches until the end of the river. Towards the end we knit 2 ch. for lifting + 1 dc.

4 r.: at the end 3 r. knit 1 vp, turn the product over. We make 1 st.b.n. in the 1st loop of the base, in the st.b.n. before. R. we knit 5 st.n., on average. p. next arches before R. knit 1 st.b.n., 5 v.p. and senior biological sciences on Wednesday. p. next arches, then 5 tbsp. in st.b.n. prev. R., senior biological sciences on Wednesday p. next arches 5 v.p., st.b.n. on Wednesday. p. next arches, then 5 st.n. in st.b.n. prev. row, art. b.n. on Wednesday p. next we repeat the arches until the end of the river. We do the last st.b.n. in 3 v.p. arches before R.

5 p.: 4 ch. (3 v.p. + 1 v.p. according to the scheme), then do st.b.n. on Wednesday. st.n prev. r., 3 v.p., st.b.n. on Wednesday. p. next arches, 3 v.p., st.b.n. on Wednesday. st.n prev. r.3 v.p., art. b.n. on Wednesday p. arch, 3 v.p., st.b.n. on Wednesday. st.n prev. R. - repeat until the end of the river. At the end of the river do 1 ch. and 1 st.n last. etc.

6 r.: at the end 5 r. knit 3 ch.p.p. and turn the product over. In every p.r. 1 dc to the end. Next we knit, repeating p. from the 2nd to the 6th to the end of the length of our openwork scarf.

After we have finished knitting the scarf, let's start tying. Without cutting the thread, we knit a r. along the short side of the product (widthwise), similar to the 2nd r., with the exception of the “picot” element.

We knit a r. along the long side. st.b.n. for edge alignment. We bind the remaining sides of the scarf in the same way. We proceed to bind the 2nd row.

We knit a chain of 28 ch, insert a hook 5 from the hook st and knit a half st.b.n., then knit 20 ch.p., then knit a st.b.n. in the middle. p. next arches

We knit 25 ch, insert the hook into the 5th stitch of the chain from the hook and knit half-st.b.n., 20 ch. and senior biological sciences on Wednesday. p. next arches - repeat until the end of the river. The last chain of r. knit from 28 ch.

On the long side we knit like this: 3 ch, skip 1 st and knit 1 dc - repeat until the end. We tie all sides of the scarf in the same way.

Before wearing an openwork scarf, wash it by hand and iron it. Wear it for your health!

Simple crochet scarf patterns and photo description

Let's look at another simple example of crocheting a scarf. We will use a light fillet pattern. We will need: yarn - 190 g, hook, scissors. The size of our product is 30 cm * 145 cm, but you can choose the size you like best. Let's move on to the description:

1. We dial 99 vp. + 3 p. rise and elm. pattern according to the diagram.

2. 5 rapports (repetitions) + 19 sts for symmetry. Repeat from the second to the seventh row.

3. When finished, we tie the first row. and we finish.

Fillet pattern diagram:

Crochet scarf snood collar

The snood scarf or cowl scarf is still a fashion trend this year. In order to start knitting a scarf we need: 800 g - brown and green acrylic yarn in 2 threads, hook, scissors. We knit using voluminous poufs of 4 dc in 1 loop. We choose the length of our scarf, multiply by 2 and get the required number of ch.

We follow the description:

1. So, for a length of 140 cm, we make a chain of brown 280 vp. 1 r.: knitting. 3 p.p. (lifting loops), 1 pouffe in the fifth from the hook. then repeat until the end of the row - 1 ch, 1 pouf, skipping 1 stitch of the chain,

2. Change to green and make 3 vp, knit 2 and 3 r. green threads.

4. Learning to make a pouf:

A. Yarn over, skip 1 loop, and insert the hook into the loop, grab the main thread and get a st. We should have got 3 sts on the hook.

b. Yarn over, knit. in the same loop, and pull out another st. There are 5 sts on the hook.

V. Yarn over, pull out 1 more stitch. There are already 7 stitches on the hook.

Mr. Nakid, we repeat the same action. There are 9 stitches on the hook.

d. Grab the thread and pull it through 8 stitches, there should be 2 stitches left on the hook.

e. Knitted. 2 p. 1 more p. left. Poof done! Next we make 1 ch. and continue making poufs until the end.

5. When we have sewn all the rows to the length we need, close the row and sew on the buttons. Our trendy snood scarf is ready!

How to crochet an openwork scarf video tutorial

An openwork scarf is a fashionable addition to a winter or autumn look. How to make an openwork scarf is shown in great detail in the following video tutorial. After watching the video lesson, you will learn how to make the basic elements of crochet.

Beautiful crochet men's winter scarf step by step

Knitting a men's scarf will give you a lot of pleasure, because such a knitted product will be imbued with the energy of love and warmth. A handmade gift will warm your man's heart.
We chose a simple knitting pattern for the classic scarf model, so any novice needlewoman can cope with the description. To knit a classic model of a men's scarf, we will need: yarn - 50 g of dark gray and 50 g of light gray, hook No. 3.

It is important to know!

1. When changing colors it is necessary to knit. specified art.n. to the last 2 sts. Then continue elm. in a different color.

2. While knitting a section in one color, hold the remaining thread of a different color along the top of the last row. senior sciences

Let's look at the algorithm:

1. Make a chain of 37 vp. Let's look at the diagram.

2. Repeat rapport from 1 to 8 p. * 14 times.

3. After rapport from 1 to 4 p. * 1 time.

4. Finish knitting and close the loops.

5. Decorate the scarf with fringe.

Scheme of the classic model:

Gratitude from your beloved man is guaranteed!

How to crochet a children's scarf yourself

A children's scarf can consist of different patterns and colors. We will look at a detailed description of a children's scarf. For this we
You will need: multi-colored yarn - 100 g, hook, scissors.
The uniqueness of our scarf lies in the fact that the knitted product consists of identical r., which are knitted separately and then cling to each other. Let's look at the description:

1. Do the first r. We collect the required number of v.p. (multiples of 9), + 4 v.p., + 3 v.p. for lifting.

2. Make 1 tbsp. n. in the fourth, fifth, sixth, seventh ch. chains.

3. Skip 4 vp, make 4 vp, 1 dc each. in the next 5 vp. repeat until the end.
It turns out a row consisting of small windows of 4 vp.

4. Make the second row. We collect the chain v.p. similar to the 1st r. We thread it through the windows of the 1st row. wave to the end.

5. Make p. similar to the 1st, taking into account the fact that the chain is threaded through the windows in front. R. This means that 2 adjacent rows will cling to each other in a chain of 4 ch.

7. Decorate the scarf with tassels. We put 6 - 7 threads of the same length and color (35 cm each) into a bundle. Fold the resulting bundle in half. We make a loop for the bun in the scarf. We pull the free ends of the bundle out of the loop and tighten it. Similarly, we make a tassel for the entire edge of the scarf, then move to the opposite side.

Our children's multi-colored scarf is ready!

How to crochet a scarf for a girl

A children's scarf for a girl with a pattern is a great addition to the image of a little princess. We follow the algorithm:

1. We dial 37 v.p. If the baby is still very small, you can dial 32 vp. First r. knit st.n.

2. Second r. Prov. 3 st.n. in 1 st., every 3 sts. Make 5 dc. This will be our main pattern. Let's do it to the end.

3. Third river Prov. all dc, skip 1 p. when we approach the loops with dc.
3 v.p. rise, 2 dc, skip 1 p., 4 dc. skip 1 p., 4 st.n. to end.

4. The fourth row, just like the second. Stuck. 3 st.n. in 1 st., every 3 sts. Make 5 dc. This will be our main pattern. Stuck. it to the end.

5. Repeat the 3rd row.

6. Make p. to the end of the scarf. Last r. close the loops. We decorate the scarf with bows.

Our wonderful scarf for the girl is ready!

Knitting from large yarn - description of the process

Knitting from large yarn looks very beautiful and neat. Today we will look at another pattern - how to crochet a scarf for beginners from large yarn. We will need: large yarn - 200 g, hook, scissors. Next we work according to the scheme:

1. Make a slip knot.

2. Make a chain (35 - 40 vp)

3. Do st.n. 6 p. from hook to end

4. Make 2 ch, knit. from 1 p.

5. Do st.n. in the same loop.

6. We repeat until the end of the length. Skip 2 p., knit a dc, make 2 v.p. 1 more dc in the same loop, repeat until the end.

7. Turn the product over and make 3 ch.

8. Do st.n. in 1 pass., from 2 ch. prev.r.

9. Make 2 ch. We make two air loops, counting from 1 st on the hook.

10. Do st.n. into the same pass where I got stuck. 1 st.n.

11. We make rapport to the end. Stuck. 1 tbsp. in each gap from 2 v.p. prev.r. to end.

12. Repeat until the end of the product. Each row is repeated. At the end of each row we make 3 v.p.p.

13. Last r. closes.

Scarves are not only designed to protect against cold and wind. Nowadays, they are used as a separate accessory to complete the look. The main criterion for a fashionable scarf is brightness and originality. Any shades, patterns, textures are in demand. How to crochet a scarf - summer or winter, thin or thick, openwork or dense - you decide for yourself. They are decorated with long fringe, pompoms, tassels, etc.

Choosing yarn for a scarf

The choice of yarn for creating scarves must be approached very responsibly. After all, the appearance of the scarf directly depends on this. It should be hypoallergenic, soft, and non-irritating to the skin.

How to crochet a scarf for beginners?

If you have never tried knitting before and have absolutely no experience, but really want to learn, try making an interesting thing for your child! No kid can remain indifferent at the sight of this cartoon character. The simplest method of making, but very bright and beautiful, you can knit a scarf with a minion even if you pick up a crochet hook for the first time.

The patterns used in the work are absolutely not complicated - the main ones are double crochets, and the binding is 3 rows of single crochets.

To work you need to prepare:

• 120 g of rich yellow acrylic,
• 30 g blue thread,
• a little black, brown and white threads - for applique,
• hook number 3.

So how to crochet a scarf with a cheerful minion?

1. To start working with yellow yarn, cast on a chain of chain stitches equal to the width of the scarf (about 50 stitches).
2. Knit 2 instep stitches and knit the first row using single crochet stitches.
3. Turn the work, cast on 2 lifting loops and also knit the next row with double crochets. Knit 14 rows in this way.
4. Next, change the yarn to blue and knit 8 rows with the main pattern.
5. Now take black yarn and work 2 rows.
6. Knit 8 rows again with blue thread, and then knit the fabric with yellow yarn to the required length of the scarf.

After finishing knitting, tie the resulting scarf with three rows of single crochets.

For the eyes, knit 2 circles of brown and white yarn and sew them onto the black stripe. Embroider a mouth and a cute children's minion scarf is ready!

You can decorate the ends with fringe or tassels made of blue yarn.

With your imagination, you can create many original scarves for yourself and your children!

Openwork summer scarf

Knitted openwork scarves for summer are a wonderful accessory that will add romance to your look and will come in handy in the evening on the beach. Choose natural yarn that does not contain synthetic fibers, thin and light. They are knitted according to the patterns given below.

This scarf model is unusual and incomparable due to its special openwork pattern.

Scarf knitted from motifs

In the wardrobe of any representative of the fair sex there should be such things that can not only warm you up during the cold season, but will become a wonderful, bright and unique accent in clothing. Excellent scarves and stoles are knitted from individual elements.

Flowers, leaves, circles, squares, etc. (any flat motifs) - all this is knitted either with yarn of the same color, or from several shades of threads that combine well with each other. Pay special attention to the color combination so as not to end up with a tasteless and tacky item.

The elements can be connected to each other immediately during the knitting process or later, when all the components are ready, steamed and ironed. The second method will give a more accurate canvas.

By replacing flat-shaped motifs with voluminous flowers, you will get a wonderful lush scarf. Products are decorated with beads, ribbons, and rhinestones.

Crochet scarf

Any craftswoman can create a warm, cozy little thing that can reliably protect against the cold. The crocheted snood scarf is made from wool blend yarn.

First, cast on the required number of stitches. It is calculated by measuring the volume of the head plus 10 cm (for a narrow collar) or taking double the volume (for a large snood). The chain is closed into a ring with a half-column. Two lifting loops and in a circle knit double crochets into each loop of the chain, close with a half-stitch. Next, knit according to the pattern below.

Crocheting a snood scarf is absolutely easy. You just need to be patient and a warm accessory will appear in your wardrobe!

Scarf with frills

It is possible to knit a very interesting scarf-boa from ribbon shaped yarn in an hour. This yarn looks like a mesh with a border of pompoms, ruffles, and fur. One ball gives the scarf a size of about one and a half meters.

So, how to crochet a ruffle scarf? Using a hook, grab the cells one at a time, starting from the first. When you have 4 stitches, knit them with a fifth loop. Thus you have the first shuttlecock and one loop. 4 more cells, pull the fifth through them - you get 2 loops, connect them together.

Turn the work and continue knitting, grabbing the cells through one and pulling them into the desired holes of the previous row.

Continue in this manner until the required width of the scarf is reached.

Trim the end and fasten it tightly.

How to crochet a scarf? Easy and fast! Stock up on yarn, knitting tools, patience and, of course, imagination!

A scarf is the simplest accessory and at the same time quite functional, it can be used as a headdress, covering the head, as a cape or stole. There are many ways to crochet or knit a scarf to make the work beautiful, bright, and original. A scarf not only warms, but is also an important detail of an outfit; it can liven up a boring, monochromatic coat or down jacket; voluminous women's models serve as a fluffy collar, which adds femininity and elegance.

Crocheting or knitting a scarf is not difficult even for beginner needlewomen; working on a simple model, be it a men's scarf or women's versions, does not require skills in knitting an openwork pattern. However, if you plan to knit an original accessory, you can always use ready-made patterns with detailed descriptions.

How to crochet a scarf: an easy pattern for beginners

An easy-to-make scarf model, which is a long rectangular fabric, can be knitted by any needlewoman who has already mastered the principle of crocheting or knitting stitches and knitting stitches. For this work, half-woolen or woolen yarn of medium thickness is used and a hook is half a size thicker than indicated on the yarn label, since it is necessary to knit loosely, not tightly. If you are doing knitting work, it is also recommended to purchase a tool half a size larger. Knitting such a product for beginners is very simple:

• To work, we make a chain of an arbitrary number of links. You don’t have to count the loops; the length of the chain is equal to the length of the work (approximately 120 cm). If you plan to knit a snood, the chain can be connected, but it is important to straighten the chain first so that it does not twist;
• Then we make a lift with one loop and then one post at a time in all links of the chain. used yarn over;
• We form 1 ch. and turn the work around. We perform this row, inserting the instrument not under two arches, but only behind the back arch, 1 tbsp in each. b/n;
• We change the side of the work again and knit a row similar to the previous one. Due to the fact that the hook is inserted into the back bow, the knitting is embossed.

Women's winter scarves with a simple relief pattern can also be created with knitting needles. To work, the number of loops must correspond to the width of the scarf; the product is knitted with a 1x1 elastic band. When knitting, you can choose the length of the work during the process; if you decide to crochet a scarf, the length is determined from the very beginning.

The pattern is very simple, so if you want to get an original work, you can use skeins of melange yarn, knit in two threads, contrasting in color, or make the scarf striped. Using the method described above, you can create a snood. This pattern is also applicable for a hat.

How to crochet a scarf with an openwork pattern: a few more options

If you decide to create an openwork version of a scarf or hat with crochet or knitting, it is not necessary to study diagrams with a detailed description of complex patterns or create intricate motifs. A scarf with a simple openwork pattern looks no worse, and you can knit it without using a visual pattern with a detailed description, just remembering the sequence of elements in the pattern.

I scheme (openwork pattern)

The length of the initial chain corresponds to the width of the work, while the number of links for the openwork pattern should be divided by 8 plus one additional edge. For beginners, you can pre-knit a small sample of an openwork pattern:

• For an openwork pattern, we form a chain of 25 loops (8*3+1) from the selected yarn. To create the initial chain, it is recommended to take a hook half a size larger so that the edge of the work is not pulled together;
• We collect 4 additional ones, in the 7th from the instrument we form 1 tbsp. s/n. Next 1 vp, 1 tbsp. s/n, through one base, again 1 vp. and 1 tbsp. s/n through one link;
• 5 ch, change the side of the openwork pattern, skipping one top stitch, 1 st. b/n, then 3 v.p. 3 tbsp. s/n in the same top, knit 1 tbsp. b/n through one vertex. 5 ch, skipping the top to the next one - 1 st. b/n, 3 v.p., 3 tbsp. s/n., drop another one, in the next one - 1 tbsp. b/n, etc. Join in the 2nd stitch from the 1st stitch of the previous row;
• Again we make 5 ch, turn the knitting over, connect to the top of the third column with one stitch. b/n. 3 v.p. and in each link of the chain of 3 v.p. We knit the previous row one st. s/n and connect with one st. b/n for a chain of 5 v.p. We repeat this sequence until the row of openwork pattern is completed;
• We form all further rows by analogy in the manner described in the previous diagram;
• We complete the work in the following way: make 5 ch, adjoining the top of the third column with one st. b/n, 3 vp, under a chain of 5 vp, 3 vp, adjacent to the arms of the third column, etc. The rapport of the openwork pattern is ready.

Let's look at other patterns for crocheting a scarf and creating an openwork pattern for beginners.

II scheme (openwork shell pattern)

• For this openwork pattern we form a chain of 29 centuries. p. In the seventh from the hook we knit 1 tbsp. b/n, 4 vp, in the 4th initial chain we make 1 tbsp. b/n and repeat until completion;
• Then we make a loop, in the first arch 1 tbsp. b/n, in the 2nd - 7 tbsp. s/n. and in all odd arches 1 tbsp. b/n, in even numbers 7 tbsp. s/n;
• At the end of the line we make 4 ch, change the side of the work, and knit 1 st at the top of the second column of the previous one. s/n, 1 vp, a similar combination in the next 3 vertices, in the sixth - 1 st. s/n, connect to the second top of the next arch with one st. s/n and further duplicate;
• Again we make 4 vp, 1 tbsp. b/n in the first arch, 3 vp, 1 tbsp. b/n in the second, 3 v.p. etc;
• At this point the rapport is completed; to move on to the second rapport we knit 4 ch, 1 tbsp. b/n in the 2nd arch, 4 vp, leave one arch, after one 1 tbsp. b/n. At the end we knit 2 ch. and connect them into the final arch. Next, we duplicate the combinations described above according to the scheme.

III scheme (openwork mesh)

• The repeat of the openwork pattern is 10 loops, so the total number of chain links for the width of the scarf should be a multiple of 10. Having cast on the first row of the openwork scarf, make 1 ch, and 1 st in the second. b/n, 3 ch, in the fifth we make 1 tbsp. s/n, 2 v.p. and in the same loop 1 tbsp. s/n, 3 v.p. 1 tbsp. b/n, repeat until the row is completed;
• At the end of the line 5 ch, work on the other side, form 5 sts into an arch. s/n. Next 5 ch. and 1 tbsp. b/n. Duplicate until the row of openwork pattern is completed;
• We knit 4 ch, turn the work over, 1 tbsp. s/n, 2 vp, one st. b/n in the tops, dial 7 vp. and connect with the next bright one, also knitting 1 tbsp at each vertex. b/n. We complete the row with two v.p. and 1 tbsp. s/n;
• Next we make 4 vp, change the direction of work, 1 tbsp. s/n, 3 ch, at the 2nd, 3rd and 4th tops of the columns we knit 1 tbsp. b/n., 3 v.p., 1 tbsp. s/n in the 4th loop of a chain of seven, 2 vp, 1 tbsp. s/n in the same loop, 3 ch. (we repeat the second row of the pattern pattern), we knit 1 stitch at the 2nd, 3rd and 4th tops of the columns. b/n. At the end 3 vp, 1 tbsp. s/n, 2 vp, 1 tbsp. s/n;
• We turn the knitting over, knit 3 tbsp into the first arch. s/n, 5 vp, 1 st in the central top. b/n, 5 vp, in the next arch 5 tbsp. s/n. This row is knitted by analogy with the third, then we repeat the repeat of the openwork pattern.

Women's winter scarf models can also be knitted using an openwork pattern made from wool yarn. It is recommended to knit the work wider so that it can be folded in half.

Similar patterns with descriptions are suitable not only for knitting a scarf or stole; openwork patterns for beginners can be used to create tops or cardigans, a summer hat from cotton yarn.

Unusual ways to knit scarves

If you want to knit a modern, original accessory, you can use not only openwork patterns, but also a non-standard crochet technique from individual elements, which, like puzzles, are assembled into a single fabric. It is recommended to knit from yarn of different colors to make the work bright. Let's consider this option:

• To work, we form a chain (the number of links should be divided by 5 and add 7 to it). For a sample to understand the principle of knitting, you can cast on 37 loops;
• In the 4th from the hook, 5th, 6th and 7th loops we knit 1 tbsp. s/n., 5 ch, in the 6th and the next four we knit 1 tbsp. s/n, i.e. alternate 5 stitches and 5 vp. by skipping the same number of rings of the original chain, you should get a ribbon with holes;
• Next, we collect the same chain from yarn of a different color. We pass it through the holes in the first ribbon and begin to knit in exactly the same way as the previous one, having knitted the stitches, we cast on 5 chain stitches, while the original chain is behind the first ribbon, and the one just cast on in front is connected into the sixth loop with a st /n. We connect five air loops behind the first ribbon. The number of ribbons is comparable to the required width of the product and the choice of yarn.

• We cast on a chain of 40 air loops for the snood if you are knitting from very thick yarn with crochet number 10 or 80 if the yarn is of medium thickness. We connect the chain into a circle;
• We decorate the initial row with half-columns s/n. We make a connection and lift to the next one, then we knit a fluffy element (make a yarn over, insert a hook and thread the working thread, repeat two more times and knit all seven loops at once). Then we secure the element with one loop. In the same one we knit another similar element, then skipping 2 loops, in the 3rd again 2 lush stitches and so on until the end of the row;
• We connect the row under the arch between the first two cones, without tightening the thread so that the connection is invisible. Next, we knit two cones into each arch between the two of the previous row to make spikelets;
• Having knitted the snood to the required width, we finish the work, by analogy with how we started it.

Similar projects for beginners can be created with knitting needles using Chinese spikelet knitting patterns. In this case, we knit the product lengthwise with knitting needles on a fishing line. The pattern can also be used for a voluminous hat; we reduce it by the number of loops in the fluffy elements.

How to crochet a men's scarf?

A warm men's scarf can be made in the simplest way for beginners, which was described at the very beginning. Only for a men's scarf it is recommended to choose strict, brutal colors, for example, gray, blue, wine or burgundy. Models of a men's scarf with stripes look good, for example, a combination of yarn in light gray and asphalt colors. You can also choose melange yarn with a transition of several colors.

While women's models are usually long and are often worn over coats, draping outerwear, men's scarves are short in length and width and are worn inside.

The standard width of a men's scarf is approximately 16-18 cm, length - 90-110 cm. As a rule, openwork patterns with holes that resemble women's models are not used for a men's scarf.

Experienced craftswomen offer original ideas for beginners on how to crochet a men's scarf, relief designs for creating a men's scarf, reminiscent of tweed or drape woolen fabric due to the presence of ribs. This model looks great and is suitable for a man's wardrobe. This option is suitable for beginners, since its scheme is very simple:

• For work, we collect a chain of 90-110 cm (corresponds to the length of the product). We make 3 lifting stitches, in the 5th from the hook and all subsequent ones we knit 1 treble;
• Next, alternate knits and purls. embossed columns, initially we make 3 ch, yarn over, place the hook behind the column of the previous row in front for the front and in the back for the purl;
• Turning the work over, follow the pattern: purl. and persons elements. The number of rows can be increased by another 1-3;
• After the strip of relief elements, we knit with regular stitches, inserting the hook not into the tops of the previous row, but into the arms in front of the braid. Having turned the knitting over, we knit the same row again, inserting the hook into the arms under the main braid, consisting of the vertices of the previous row;
• We knit 3 more rows by analogy with the previous one, which is described above. The repeat of the openwork, relief pattern is completed, you can knit a couple more of these strips and complete the work with rows of front and back stitches. You can also change the number of rows of each strip depending on the thickness of the yarn.

A men's scarf with a relief pattern can also be knitted. For a men's scarf knitted, a pattern with diagonal stripes or rectangles in a checkerboard pattern is ideal. A similar pattern can also be used to knit a men's hat. The pattern is suitable for beginners, the diagram is as follows:

• To knit a men's scarf with knitting needles, the number of loops for the width of the product should be a multiple of four plus two edge stitches;
• The initial loop is removed and then the faces are alternated. and out. 4x4, at the end we knit one purl. Further along the terrain;
• In the 3rd row we make an offset to create diagonal stripes. Remove the first edge, purl the second, then knit 4, purl 4. and so we alternate until the row is completed. In the fifth we remove the first one, 2 p., 4 knits., 4 p. etc. In the seventh: purl 3, knit 4, purl 4, in the ninth: alternating purl 4, knit 4. We knit the entire product using this principle. At the end we close the loops with knitting needles in the traditional way or with a crochet hook.

Knitting a scarf for beginners is not difficult; it is the simplest product, the basis for knitting needlework.

The length of the scarf can be adjusted while knitting, so if you run out of yarn, you don’t have to buy another one.

In addition, when knitting, you can make a pattern with transverse stripes from yarn of different colors.

How to crochet a scarf for a boy and a girl

For a child, it is recommended to knit a set consisting of a hat and a scarf, decorating the products with decorative elements: for a boy, the faces of favorite animals knitted from yarn can be used, for a girl - flowers, which are also easy to create for beginners.

Let's look at how to knit a set of a hat and scarf with flowers and leaves:

• For the scarf, we form a chain approximately 10 cm long, knitting 1 tbsp into the fifth link from the hook. s/n, omitting 2, in the 3rd we form 1 tbsp. b/n, omit 2, 1 tbsp. s/n, 3 vp, 1 tbsp. s/n and so on until completion;
• We turn the work, 4 ch, into the same 1 st. s/n. We knit 1 tbsp in all arches. b/n, and in the top 1 tbsp. s/n, 3 vp, 1 tbsp. s/n. Using a similar pattern, we knit to the selected length. You can use other patterns for crocheting and knitting a scarf described above for a children's product. The scarf can also be knitted. For beginners, creating a satin scarf using medium weight yarn without an openwork pattern using knitting needles may be an easier option;
• The edge of a children's scarf can be decorated with decorative elements, for example, arches made of yarn in an alternative color. The edges of the scarf are decorated with flowers and leaves, and a fringe of yarn. It is very easy to knit a flower: we form a circle of 5 stitches, then three ch, and then three more, knit 3 tbsp. s/n, then alternate 3 vp, 3 tbsp. s/n. In total we form 5 arches. We tie the arches with 1 tbsp. b/n, 1 half-st. double crochet, 5 tbsp. s/n, 1 half-st. s/n, 1 tbsp. b/n. On the Internet you will find other flower knitting patterns with descriptions;
• We start knitting a hat from wool blend yarn from the top of the head. We make a sliding loop and knit 16 stitches into it. s/n. We tighten the working thread. We form a circle for the top of the hat, first knit 2 tbsp. s/n, i.e. we make increases, in the next row we make increases through one, in the 3rd - through two, then a row with increases through three, etc. There should be a total of 6 rows (for a hat for a child under 2 years old) or 7 (for a hat for a child from 3 to 5 years old), it is recommended to make increments in increments so that you do not end up with a polygon instead of a circle. We knit the next rows without increments, forming the main part of the hat.

If you want to crochet a boy's scarf, you don't have to choose dark colors like you would for a man's scarf. An openwork pattern is also allowed. You can use the following scheme for creating an original set of a scarf and a “Lion Cub” hat:

• We knit the middle part of the scarf from yellow/orange yarn. We form a chain of 10 vp, in the sixth and four more we knit 1 st. s/n. Turn the work over, 5 vp, 5 tbsp. s/n;
• Next, take a beige/light brown working thread. We tie the middle part of the work according to the same pattern, connecting the strips using the side rings;
• We make lion faces as decoration for the work. We knit a circle from yellow/orange yarn (the same way as we knitted the top of the hat), the size of the circle should be smaller than the width of the scarf. We tie a fringe around the muzzle. We take 2 threads of beige/light brown color, approximately 10 cm long, fold them in half, insert the fold with a hook into the hole in the edging of the circle, draw the ends of the threads through the resulting loop, and tighten. For the eyes you can use appliqués or beads; the nose, mustache and mouth can be made from yarn;
• To knit a hat, you can use the previous pattern to complete the work or knit the product with knitting needles. The front part of the hat can be decorated with the face of a lion, and a pompom can also be attached to the top of the work.

Having become interested in such an interesting hobby as crocheting, some do not know where to start. However, the craftswomen give advice - it is better to choose some small thing that is easy to master. The hook will help you make a thick scarf for cold winters or a light one for spring. And how nice it is to make a beautiful scarf made with your own hands for your child.

You can do something strict for a business man, sweet and airy for a fashionista. There are more than enough options. With the help of this article we will tell you for beginners, and even a not very experienced person can make such a thing himself with the proper desire and diligence.

Just don't laugh! Oddly enough, these two types of scarves are the easiest to make, so we included them as an example. Why are they simple? It’s very simple - to create it, use threads of calm tones and classic ones. And a children's scarf is small in size, so it’s not difficult to make it with your own hands. Let's start with the masculine one. Usually a relief pattern is taken.

Before you start knitting a scarf with your own hands, let us briefly recall the symbols necessary for:

• Circle. Means air loop (v.p.).
• Long cross - with 1 crochet (st. s/n.)
• A cross with a crescent at the end pointing to the left is a convex column.
• If the crescent faces to the right - a concave column.

First you need to choose what width the product will be. Now we knit a small pattern for a scarf according to the photo below.

Scarf pattern for beginners

It is needed so that you can decide on the number of loops. We count. The resulting number should be divisible by 6. Don’t forget about 4 edge loops and symmetry:

1. In the first row we make all double crochets.
2. The beginning of the row is 2 lifting loops. We make relief columns in this way: 3 concave, then 3 convex. At the end of the row - a double crochet.
3. We make the third row like the second.
4. We start again with 2 lifting loops. Under those columns that are connected concave, we make convex ones, and vice versa - under those that are convex we make convex ones. We complete the row with a double crochet.
5. The fifth row is similar to the previous one.
6. This is how we continue to knit our product until the length reaches the desired length. If you take a hook that is three times thicker than the thread, then the thing will look airy.
7. If you are planning to make a product, but do not know how to crochet a scarf with embossed stitches, you can read a separate article about this.
8. At the same time, you can make a men's scarf using single crochets, but alternating colors. For example, black and white. Or blue and black.

If we knit a scarf for a child with our own hands, then it is better to choose bright colors. Let's say hot pink and yellow. Applications will decorate your product well. The item for boys is made with jacquard or with simple patterns. And when we make a crocheted scarf for a girl, it is desirable that it be more elegant, airy and openwork.

Let's show an example that requires yarn of 2 colors: blue and white. On the product we will have three stripes, tapered at the edges and turning into fringe.

So, three parts will be involved in the canvas. One blue one, knitted from double crochets - 8 pieces in total. The second is white, for which 7 pillars are used. And another blue one, knitted from 6 columns. Now we will tell you step by step how to make ends for a scarf.

1. The blue stripe will be the first and widest.
2. To decrease it, remove one loop in the first row.
3. We knit 4 rows as usual, in the fifth we decrease them again.
4. Repeat the decrease every three rows.
5. The second stripe is white, and the third is a thin blue one.
6. For them, we skip 5 rows, do a decrease, then repeat.
7. So we knit until the end, in which we decrease after 3 rows.
8. To create a fringe yourself, we make teeth consisting of 5 air loops.
9. They are knitted along the edges of blue ribbons.
10. When we make a white one, we connect it with blue ribbons, hooking one clove to another

For children, you can make a scarf using knitting needles, the end of which will represent the head of an animal. For example, a seal. To do this, we knit a double crochet. Let's make the paws and tail, as well as the head, which is made in single crochet columns. Now we sew on the button eyes, embroider the mustache and mouth.

Creating a Clamp

This knitted scarf for beginners is also called a snood. Surely there are people among you who do not like to wear hats. This decoration is perfect for them - it covers their head and looks good as a decoration.

You can create a clamp without a seam or with a seam. For the first option, the instructions are simple - the scarf is knitted with a simple pattern. Then it is sewn together, or you can make buttons on one end and loops on the other.

To create the second option, you should make a circle. To do this, we cast on loops. You can find out how many of them you need by measuring the volume of your head. We connect the loops in a circle, then choose any suitable pattern. Well, or we perform double crochets with or without crochets. If the pattern is simple, then we select a variety of interesting colors. If it is complex, you can limit your imagination to one shade.

When a person wonders how to crochet a scarf for a child on his own, the main advice is not to overdo it with patterns and colors. Traditionally, blue is used for boys and pink for girls. But it would be nice to ask the child himself. Maybe your little one has seen enough cartoons about Princess Celestia, and now she wants a purple scarf at all costs.

An airy and beautiful thing will complement any wardrobe, choose a pattern. Fortunately, on the Internet, patterns of openwork scarves are presented for every taste. Or we can make the option shown in the pictures below. This pattern is simple, but the handmade scarf looks very beautiful.

A master class for beginners on knitting a scarf will help you make such a thing. We take threads, a hook and get started.

1. First we knit a scarf. And then we start decorating it.
2. We tie the length of the product with a single crochet on both sides.
3. The width is decorated with 5 air loops in the form of cloves. At the same time, we read 4 loops in the row, and knit loops in the fourth.
4. To make a fringe that will run along the edge of the product, you need to make 28 loops.
5. We need 5 loops from the end. We insert a hook into it and knit one half-column.
6. We make 20 air loops.
7. We connect the middle of the arc and the chain.
8. The rest of the fringe is knitted in the same way.