Hairpins from foamiran have begun to be popular recently. If you have the skills to work with foamiran, then making a hairpin out of it is not difficult. Hairpins (with flowers, in the shape of a hat, etc.) made of foamiran are worn by women of all ages, such an ornament can even decorate the bride's hairstyle.

More and more in demand lately brilliant foamiran, but making small flowers out of it is not so easy, as it is quite dense, great for bows of all shapes and colors. Below are a few hairpins with a step-by-step description.

To get started you need pick up a hairpin mount.

All hairpins can be divided into two large categories:

1. for loose hair(clothespins and hoops);
2. for collected(elastic bands, hairpins and massive hair clips).

Foamiran appeared relatively recently, but has already become popular for making various jewelry. You can buy it at a craft store. The range of colors will pleasantly surprise even the most fastidious customer. Each time, manufacturers produce more and more new foamiran sheets, and already on free sale can be found material with glitter.

Glitter foamiran in glitter sheets

But, despite such a variety, the material of delicate colors is most in demand.

Important! Good quality material, should not exceed a thickness of 2 mm. In appearance, it is a bit like suede. The material is non-toxic, and children can be involved in needlework.

Holds its shape well, but so that the quality does not deteriorate, do not heat too much. It can be washed, while the decoration will not lose its former shape. Sheets are easily cut with ordinary scissors. In addition, the material is perfectly painted.

The blanks are glued together with hot glue.

Vattention! Material so soft, what on the him may stay footprints from pressure.

But at the same time, it is precisely due to this property that the material easily takes the necessary shape.

Necessary materials and tools for needlework

In order to make a hairpin you need:

• foamiran;
• paints;
• color templates;
• scissors;
• glue gun;
• iron;
• toothpick;
• barrette.

How to make hairpins from foamiran with your own hands?

From shiny or glittery foamiran, you can make flowers that are difficult to distinguish from real ones. Moreover, even a beginner can make such products.

The main thing is to first decide which flowers you want to make, because the execution technique is slightly different.

All the materials that were written about above are the basic set for making foamiran hairpins. First you need to make blanks for the future flower:

1. To do this, flower elements are drawn on the sheet, you can use special templates.
2. After cutting, each element needs shape. To do this, put the flower part on a heated iron. In this state, the faom becomes plastic and various elements can be made from it.
3. To make the flower look more natural, you can use a styrofoam ball, on which all the petals will be glued.
4. After that, you need to cut out several leaves from the same material and complete the decoration.

Dandelion on a hoop

At first glance, the job may not seem easy. A wreath of dandelions is a stylish decoration that will be great addition to the summer sundress.

For this work, in addition to the standard set, You will need a knitting needle and curly scissors. For one dandelion, all strips of material 50 cm long and 2 cm wide will be required.

Stages of work:

1. One edge is trimmed with curly scissors. After that, the workpiece is cut into fringes.
2. Each strip rolls up into a tube.
3. Then unfold, warm on the iron.
4. We turn the fringe in the form of a dandelion.

Advice! Do not forget to glue everything with glue. We unfold all the petals so that the dandelion becomes blooming.

Each dandelion is complemented by foliage, and glued to a clip or rim.

sparkling bows

Luxurious bows are always relevant.

Let's take a look at how to make a butterfly bow step by step.

First you need to draw a bow template. You need two blanks, one of which will be 10 cm long and the other two cm less.

A pattern is applied from the wrong side of the sheet, the blanks are cut with scissors. In this work, material of contrasting colors was used.

After that, we move on to decor. Glue decorative elements on the edge of each side - half-beads, rhinestones or sequins. The blanks are glued to each other with glue.

Butterfly for the bow is made of the same material. A rectangle 13 cm long and 4 cm wide is cut out and cut with a fringe in the center so that it can be glued. The approximate number of resulting strips is 4-5. For decoration, you will need two such blanks.

After that, each blank is glued together. An oval blank is cut out, and oval parts with notches are glued onto it.

All elements are assembled and glued to the bow.

On the reverse side, a hairpin-clip or elastic band is attached. A pin can also be attached to such a bow, then it can be used as a stylish brooch. Such a decoration will be a suitable addition. to a summer look, evening dress or decoration for a children's hairstyle.

Hairpin-brooch with lilies

Lily is a flower that cannot be disliked. You can make it out of faom with just a little effort.

First you need to make paper blanks. For a lily, you need 6 petals. You can draw which, either on your own or by printing a template.

After that, it is necessary to cut out 6 petals for the future flower and give them a wave-like shape by heating on an iron.

At the beginning of each petal, you need to put a few specks to make the flower more realistic.

Make stamens from wire and beads. The blanks are glued together with a glue gun. Lastly, the stamens are glued.

After that, add a few petals to the plants and attach a clip. You can use this jewelry as a hair clip, or as a brooch for an elegant look.

Flowers from foamiran are obtained like real ones, and even a novice craftswoman can make them. Jewelry with such flowers will be a great addition to hairstyles or as a gift. Creative success!

Recently, handmade products are gaining more and more popularity, penetrating into many spheres of life. Ornaments are a prime example. Fashionistas are happy to use foamiran hairpins - original hair accessories that are famous for their irresistible beauty and uniqueness. A handmade hairpin will be of particular value to its owner.

Foamiran (other names: foam, revelure, fom eva) - foamy material for decoration. It is produced in sheets, a distinctive characteristic is softness, suppleness. Thanks to these properties, the material perfectly “remembers” the necessary shape and texture, retains bends and veins. Foamiran is easy to cut and wash. It is non-toxic, harmless to humans and the environment.

The term "foamiran" comes from the name of the manufacturer Foamlran. The material was brought to Russia from Iran. Until now, this country is the main supplier of foam to the needlework market.

The color scheme of the material is represented by a huge variety of options. If you need to give hairpins with foamiran flowers a unique tone or create a smooth transition from one shade to another, you can paint the material yourself. There is a foam with prints (flowers, geometric shapes, pictures).

Another advantage is the variety of compositions that can be created from this plastic material. Hairpins, headbands, bows, garlands, flowers, unique decor elements. It is preliminary recommended to watch several master classes on making foamiran hairpins. They will allow you to visually understand the intricacies of the process. Foamiran

What you need to work

Hair clips made of foamiran, like any handmade product, are created according to a certain technology. First you need to choose a model. A huge number of examples for every taste have been published on thematic portals. You can draw your own sketch. Then you get a one-of-a-kind product. After that, you should stock up on additional materials, tools, decor. For work you will need:

• stationery knife or scissors;
• a simple pencil with which outlines will be drawn;
• toothpicks for tracing contours, creating veins and small holes;
• wire for the frame;
• stamens for flowers;
• teip tape to wrap the base;
• iron or lighter for heating.

Having at hand all the items from the above list, you can safely proceed to the manufacture of the composition, which remains to be attached to the base. For this, such types of hairpins as comb, clip, banana, click-clack are suitable. Also use elastic bands, hairpins, hoops.

Basic Flower and Leaf Techniques

A distinctive feature of the foam is its ability to stretch a little. This is quite enough to give the material the necessary shape. The main thing in this matter is not to overdo it, otherwise it will break.

Foamiran becomes pliable under the influence of heat. You can use a lighter, iron, candles. However, the temperature of human hands is quite enough to form the desired detail of the future composition.

The most common foamiran product is flowers. Initially, a stencil is prepared taking into account all sizes. The larger the flower is planned to be, the larger each individual petal should be. After that, a sheet of foam with a thickness of 1-1.5 mm is taken. With the help of a toothpick, the shape is transferred to it according to the pattern. Then the required number of elements is cut out. The product is formed according to the principle: cut - heat - shape - stick.

the Rose

The rose is considered the easiest foamiran flower to make. To do it, you just need to repeat the step-by-step algorithm:

1. Prepare the stencil.
2. According to the template, cut out a green sepal and leaves, petals from a material of a suitable color. The volume of the finished product depends on the number of petals.
3. Heat the leaves with an iron or a lighter, form an accordion, twist. Pull out the middle to get volume.
4. From the foil, make a drop of the size required for the bud.
5. Attach the bead to a 15 cm long wire.
6. Insert the glued wire with the bead into the center of the foil drop.
7. Glue 3 petals onto the drop so as to mask the foil element.
8. One by one, attach all the petals to the finished bud.
9. Cut the sepal around the perimeter.
10. Treat the sepals and leaves with a heating device by analogy with the petals, connect with the flower with glue.

It is recommended to heat the foamiran petals with an iron. To form a wavy edge, you need to use a lighter. The material is flammable, so contact with fire should be no more than a second. If the part catches fire, then do not put it out with your fingers. In this case, it is better to always keep a container of water nearby.

chamomile

Despite the simplicity of appearance, many girls love chamomile. To make this flower from foamiran, you must follow the instructions:

1. Four circles are cut out of white foam with a difference in diameter of 1 cm.
2. The shape of the petals is cut along the entire perimeter, after which they are cut to a distance of 3 mm from the center.
3. The edges of the petals are heated, they are given a characteristic shape.
4. A blank of the middle is cut out of yellow foam - a strip of 27 x 2 cm.
5. Cuts are made along the entire length to create a fringe effect.
6. The whole part is smeared with glue by the drip method, twisted.
7. The finished center is attached to the wire.
8. Prepared petals are strung on the bottom of the stem from smallest to largest.
9. Each layer is fixed with glue.
10. The final element is a green backing in the form of a circle with notches.

Lily

Creating a lily from foamiran is not difficult even for novice craftswomen. Manufacturing algorithm:

1. A stencil is created in the form of a lily petal 6 cm long.
2. From the white material, 6 petals are cut out according to the stencil.
3. On both sides, the blanks are tinted in a pale pink or pale lilac color.
4. The petals get hot.
5. Veins are pressed through with a toothpick.
6. Beautiful undulating curves form along the edges.
7. Dots are applied to each blank, the bottom of the petals is darkened with a brown felt-tip pen.
8. The stamens are connected to the wire with glue.
9. 3 oblong green leaves are cut out of the foam.
10. After heating, a texture is created.
11. Petals are attached to the stamens with glue in several rows, three elements in each.
12. Leaves are glued to the flower.

Ranunculus

Ranunculus is a fairly common flower throughout Russia. Only few people know him by this name, most of them know him as buttercup. It is not difficult to make it with your own hands, for this:

1. The stencil is being prepared.
2. Petals of different sizes are cut out of red material. The more their number, the more magnificent the flower will turn out.
3. A small ball is twisted from the foil.
4. The foil core is attached to the wire.
5. Petals heat up, form in the form of waves.
6. The petals are overlapped to the foil ball, starting with the smallest ones.

Dandelion

Dandelion is one of the most common flowers in the world. You can make it from foamiran by following the recommendations:

1. A strip of 2 x 60 cm is cut out of yellow foam. If smaller sheets are available, then several strips must be prepared, giving a total of 60 cm.
2. Cuts are made along the entire length, not reaching the edge of 5 mm. It turns out fringe.
3. A wire 10 cm long is wrapped with a strip of green foam 5 mm wide. Glue is used as fastening.
4. After the stem is ready, a fringe is wound around it, each layer is fixed with glue.
5. The finished flower is heated, the petals are given the desired shape.
6. Leaves are cut out of green foamiran, veins are pressed into them after heating.
7. With the help of glue, the leaves are attached to the stem under the flower.

Perhaps everyone in childhood weaved a wreath of dandelions. You can feel like a child again by making it from foamiran. The product will give the same joy, but will not fade. You can wear such a wreath for folk festivals or a theme party.

Orchid

Since ancient times, the orchid has been considered a symbol of wealth, love and beauty. Even a novice needlewoman can make this beautiful flower, just use the master class:

1. First, a template is prepared.
2. White three-petal and two-petal blanks, a tongue are cut out.
3. The petals are heated, pressed on a special mold, taking the necessary shape and texture.
4. The tongue is tinted in three colors. The tail and wings are in lilac, the head is in yellow, the middle is in a red dot.
5. Each side is treated with a heating device and twisted to the central part.
6. A two-petal blank is glued to the center of the tongue from below, then a three-petal one.

Jasmine

Jasmine attracts not only with its beauty, but also with a wonderful aroma. You can create a flower by following the step by step guide:

1. The stencil is being prepared.
2. The prepared form is transferred to the material, cut out. For one flower, you will need 2 four-petal blanks, 1 sepal, stamens in the form of a white rectangle, 3 leaves.
3. The petals are heated, a depression is formed, and the appearance of a cup is given.
4. The leaves are heated, veins are drawn, a boat shape is created.
5. A white foamiran rectangle is incised, not reaching the edge of 5 mm. It turns out a thin fringe.
6. The free edges of the stamens turn yellow.
7. The stem is formed from a wire 7 cm long.
8. A fringe of stamens is wound around the stem, everything is fixed with glue.
9. From the bottom of the stamens, 2 rows of petals are strung alternately on the wire in a checkerboard pattern, fixed with glue.
10. The last layer is glued to the sepals.
11. The leaves are attached to a separate wire.
12. The composition is assembled by twisting the flower wires and leaves. The bare area is decorated with a satin ribbon.

A hairpin with foamiran jasmine, decorated with beads and rhinestones, will be a great gift.

Leaves

The manufacture of almost any plant composition is not complete without leaves. It is very easy to create this element from foamiran, especially if you have a special mold. The finished form saves a lot of time, you do not have to manually vein, the appearance is quite realistic.

The creation of leaves begins with the preparation of a paper stencil, which is applied to the foamiran canvas. Next, the elements of the required size and color are cut out. Finished products are warmed up. With the help of a toothpick or a mold, veins are drawn, a shape, a bend is given. If necessary, the leaves are additionally tinted.

Accessory Assembly

After the flowers are ready, they should be assembled into a composition that will make foamiran hairpins more colorful. There are two simple options that are usually demonstrated in master classes. Everyone will be able to choose the most suitable:

1. The main material for assembling the composition is glue. Each individual element is cut in such a way that the base is even, without additional material residues. After that, all items fit into the composition. In the process, individual elements are recommended to be interchanged to create the best option. Flowers from foamiran, petals and additional decor are interconnected with glue in places of greatest contact.
2. The main material is wire. One end is smeared with glue and stuck into the center of the flower. If foamiran cannot be pierced, you can pre-prepare the hole with an awl. To the leaf, the wire is fixed from below. After all the elements of the composition have acquired additional legs, the finished product is assembled by twisting the wire together. In the case when the bonding material is knocked out of the overall picture, it can be wrapped with a satin ribbon to match the petals or leaves.

After creating the composition, it must be attached to the base hairpin. First you need to accurately determine the location. It is advisable to first try on the unfixed version in front of the mirror. Then, using glue or wire, the flower arrangement and the hairpin are connected.

When using glue to attach a large bouquet, you can insure yourself with a thick material gluing, which is installed from the bottom of the hairpin and elastic band, grabbing the edges of the composition. If wire is used, it is recommended to decorate its open sections with a satin ribbon, and carefully cut off the excess pieces. For comfortable contact with the head, especially when creating children's hairpins from foamiran, it is also recommended to use gluing.

If you decide to start making foamiran hairpins with your own hands, you should start with the simplest options. These include dandelion, chamomile, jasmine. It is recommended to watch at least one master class beforehand. Only after the first copies are ready, you can start creating more complex compositions.

In order to correctly determine the size of the flower, you must first select a hairpin, but which it will be attached to. The larger the contact surface of the base with the flower, the larger the composition can be. If large flowers are attached to small hairpins, then over time they will come off.

Beginners should not pre-purchase a large assortment of material. It is better to start with 2-3 sheets of the necessary shades to create a particular flower. Only in case of successful completion of the process of making hair accessories from foamiran, you can safely go to the store to purchase additional material. For convenient work, it is enough to have the main colors at hand: white, yellow, green, red, pink, lilac. At any time, they can be given the desired shade with the help of paints.

Video

Anyone who has never heard of foamiran, and even more so has not worked with him, cannot imagine how much can be made from these colored leaves. Children's elastic bands are often decorated with delicate foamiran roses, and beautiful hairpins with foam products will decorate the collection of hair accessories not only for girls, but also for an adult lady.

Hairpins can be small, or they can be quite bulky, accented. These hairpins are the essence of hairstyles, and often they are made specifically for some kind of celebration. It can be crab hairpins, and hairpins, clothespins. Most often, a flower is chosen as the main object.

Rose is the most popular option. It is not very difficult to do, but sometimes it is not an option for beginners. Still, there are easier schemes, on the example of which you can practice working with foam.

Wedding hairpins with foamiran flowers are very popular. Such handmade jewelry is the best compliment to the bride. Especially if they are in tune with the circumstances of the celebration. For example, a wedding in May - and the bride has a hairpin with a sprig of lilac in her hair. Or at the time of peonies, the bride flaunts in a hairpin with a foamiran peony.

Features of working with the material: do-it-yourself foamiran hairpins

Before attaching a beautiful flower or berry to a hairpin, you need to make this same flower or berry. And without knowledge about the material itself, it will be difficult to make a product of high quality. Therefore, the following information will not be superfluous.

What you need to know about foamiran:

• The main property of the foam is to remember the shape that you gave it, but remember that you can’t stretch the material too much (it will tear);
• The material does not absorb water, so the product can be washed from it, and if you get caught in the rain with such a hair clip, it will not deform;
• Sheets are perfectly cut with ordinary scissors, but modern punchers are often used;
• The color range is extensive, but light foamiran is traditionally more popular, since it can always be tinted if necessary.

PVA glue is not suitable, ideally you need hot second glue. Therefore, all foamiran lovers will have to stock up on a glue gun. Of the minuses - the porosity and softness of the material, because the indentation of nails and sharp objects can remain on it, be careful.

Do-it-yourself hair clips from foamiran: a list of necessary

So, you want to make a wonderful hair clip for girls. However, such a hairpin is also suitable for young girls. First, see if you have everything you need.

For work you need:

• White and green sheets of foamiran;
• Green corrugated paper;
• Ordinary scissors;
• Hot glue;
• Ready stamens;
• Cardboard;
• The hair clip itself;
• Lighter;
• Thin wire;
• Pencil.

And, as always, the work begins with the preparation of the place where you have to work. Don't forget about good lighting (ideally daylight), and a clean place where nothing will distract you from your work. Well, be patient, the process is not the fastest, requiring attention and caution.

Beauty from foamiran: MK hairpins

So, first you need to make a template in order to draw and cut out the petals on it. From cardboard, make a blank for the petal. The diameter is usually within 4-5 cm, the entire workpiece will consist of 4 petals.

The template is cut out of cardboard, and applied to the foam so that the scraps are kept to a minimum. It is not recommended to do this with a pencil or pen; make the contours for cutting with a toothpick or the back of the brush. It also has a pointed tip.

Eight four-petal blanks need to be cut out of the foam. And then, with manicure scissors, make a wave along the upper edge of each blank so that the future petals look natural. Then take 4 blanks, and fold each one on top of each other. And then twist them together like you twist laundry when washing. But not very much.

• Warm up the middle of each workpiece - with a stick, make a recess in the middle, from the inside;
• At a distance from the outside, direct the flame of the lighter to warm up the material - let it take the shape you need;
• Do this with each workpiece;
• Then the flower can be collected - fold the stamens in half, glue to the center of each flower with a glue gun;
• Then you need to make sepals - cut the foam into 8 squares 2 by 2 cm;
• Cut out the sepals, and twist each edge of the workpiece with your fingertips, and then glue it to the base of the flower;
• Make twigs from the wire, wrapping each stick with corrugated paper (as an option - tape tape);
• The length of the branch will be 8 cm, and for the buds you need 5 sticks of 5 cm;
• From the green foam, leaves are formed, as well as sepals.

Final part: automatic hairpin made of foamiaran

From the inside, a wire is screwed to each leaf, while setting them aside. Make buds, cut out petals from white foam, about 5 for each bud. Collect a bud on a short stick, fix each petal with hot glue. The sepal is fixed last.

You need to collect a twig from the top edge, securing three buds and one leaf on a twig. Screw the wire onto the twig, cover the places with green corrugated paper, attach one leaf below on each side of the twig. Then go down so that you can wind 2 branches with buds, and 2 leaves on each side. Fasten the flowers on a branch, free space is needed for each flower.

You will get a beautiful twig, which is all that is left to glue to the clip with hot glue. Press the workpiece to the glue, and hold for a few seconds. The glue should grab. If you want more glitter, you can arrange additional decor for the hairpin - beads, glass beads, beads, etc.

Is a foamiran rose hairpin in fashion?

Of course, the rose was considered and is considered a classic option, however, a little boring. Therefore, even for a wedding, brides prefer to do something more original - sometimes a hair clip can be in the form of strawberries or sweets. But this, of course, is more daring for brides.

If you still like the pink version, think about the hairpins from a small bouquet of small spray roses. It will look more elegant, original than a blossoming bud once. And at the same time emphasize the freshness and youth of the bride.

Ideas: foamiran headbands and hairpins

Craftswomen do not give any ideas! Now New Year's hairpins are being actively made - such as a spruce branch or New Year's balls. You can use shiny foamiran for these purposes.

Also look great:

• Berry bandages and hairpins;
• Hairpins in the form of sweets - sweets, marshmallows, cookies and marmalades;
• Hairpins in the form of emoticons;
• Hairpins in the form of marine life - from shells to skates.

But your imagination, of course, no one limits. You can make whole compositions from foamiran. And sometimes a simple chamomile or a cornflower on a hairpin becomes a favorite decoration.

Foamiran hairpins: master class (video)

Be sure to try working with foam - this material is interesting to use, it turns out very naturally. Yes, and the hairpins are a feast for the eyes, such are not ashamed to give.

Decorative accessory: hairpins with foamiran flowers

Hairpins with foamiran flowers can make the hairstyle more original Hairpins decorated with flowers, rhinestones, ribbons are called decorative. They have a dual function: they fix the hair and decorate the hairstyle. How to make them - read below.

Fashion trend: do-it-yourself foamiran hairpins

Flowers on hairpins can be made of different materials.

Namely:

• fabrics;
• polymer clay;
• Rhinestones;
• Zhemchuzhin.

Among the advantages of foamiran studs, it is worth noting the excellent aesthetic qualities and low cost.

When choosing decorative accessories for hair, be guided by the planned events, clothing style and your mood. Flowers in the hair, today is a fashionable trend. Decorations made of foamiran look very gentle and natural. This is a plastic suede that can take the desired shape when heated. It is easily cut with scissors, environmentally friendly, and most importantly, it is not afraid of moisture. Even beginner needlewomen will appreciate the properties of this material.

Foamiran hairpins are not difficult to make with your own hands. Such flowers, at first glance, cannot be distinguished from real ones.

They will adorn the most sophisticated fashionista with dignity.

Beautiful foamiran hairpin with snow-white lily: master class

Lily is a delicate flower of amazing beauty, a symbol of purity and innocence. A hairstyle decorated with such an accessory will emphasize the lightness and freshness of the image.

The simple structure of the flower will allow even novice needlewomen to create such decorations. The lily flower consists of 6 separate, oblong petals, 6 stamens on long filaments and a stigma. For the manufacture of petals, we use foamiran, and we will make stamens and stigmas from wire.

Required materials and tools:

• Foamiran white;
• Hairpin;
• Glue moment;
• Knitting needle or tooth stick;
• Scissors;
• Cotton pad;
• Semolina;
• White teip tape;
• Crepe paper;
• Pastel yellow;
• Cardboard or thick paper.

Flowers on a foamiran hairpin may differ both in color and in size.

To make the petals, you need to make a template from thick paper. The flower will not be large, so we draw a small, oblong petal 6 cm long and 3 cm wide. We apply the resulting template to the foamiran, and circle it with a knitting needle or a toothpick. We draw 6 petals and carefully cut out along the contour.

On suede, a trace of sharp objects remains well, so it is not recommended to use a pencil.

It is necessary to prepare 6 stems for the petals. From a wire with a diameter of 0.4 cm, we cut columns of 9 cm and wrap each in a spiral with white crepe paper. Glue the resulting stems to the finished petals, retreating from the edge of 5 mm. We heat the iron to a warm state, and apply only the edges of the petals, slightly arching and twisting them.

The next step in making a lily will be the execution of stamens. Prepare 6 wires 6 cm long by processing them with crepe paper. On the one hand, we bend the finished samples with a small loop in the shape of the letter G. With the help of yellow-colored semolina, we give the stamens a natural friability. Dip each blank with a loop in glue, then in semolina. Our stamens are ready.

The production of a pestle is carried out in several stages:

• We cut the wire 6 cm long, and process it with white crepe paper;
• We divide the cotton pad into 2 parts, and cut one of them in half with scissors;
• We tightly wind the half of the cut-off disk onto the pestle blank;
• We wrap the resulting stick in a spiral with a white teip tape;
• With the wide side, dip the stamen into the glue, and then into the colored semolina.

We collect the prepared parts into a flower. We place the pestle in the middle, place stamens and 3 petals around it, glue the remaining leaves in between. We wrap the entire structure with a white teip tape, cut off the remnants of the wire, and plant a compressed small piece of foamiran on the “tail” of the flower. We insert the hairpin from top to bottom, piercing it between the petals. Your unique head accessory is ready.

Lily will be a worthy decoration for voluminous hairstyles, giving them airiness and tenderness.

Choosing the design of a foamiran hairpin

Decorating her hair with decorative hairpins, a woman wants to emphasize her individuality.

The design of the hairpin should be chosen depending on the hairstyle and outfit.

Properly selected flowers will complement the image and create a unique style.

It is possible to make a hairpin from foamiran with any flower. Fantasy will tell you whether it will be a large rose or a lily, a fluffy chamomile or a small forget-me-not.

Nuances:

1. It is important to remember that for large flowers you need a large hairpin, otherwise the decoration will not stay in the hair.
2. Small items will require more time and patience from needlewomen, but an excellent result will surely please others.
3. The choice of jewelry depends on the color and type of hair. A hairpin with a large bright flower will emphasize dark-haired beauties. Blondes will be decorated with an accessory with gentle tones.
4. The flower must certainly match in color and style of clothing. Lilies and orchids are perfect for an evening dress. To the women's sundress - wild flowers and medium-sized bed roses. Very young girls will be fascinated by a scattering of small roses.

The main rule is not to overload, but to emphasize the image and style.

Small roses on a foamiran hairpin

In the hairstyle, small flowers look very elegant, scattered over the head or collected in small bouquets. Unlike large jewelry, small "stars" in the hair will be appropriate in everyday life.

To make small roses you need:

• Foamiran of the desired color;
• Iron;
• Scissors;
• Glue moment;
• Hairpin;
• Tweezers;
• Foil.

It is better to make roses from foamiran for a hairpin in a small size so that they look harmonious

29 March 2016

More recently, a new fashion has appeared - to wear flowers in hair. Also, foamiran material has recently begun to gain great popularity among needlewomen. Flowers from foamiran and they really turn out to be very realistic and durable, they are not afraid of either frost or heat. Let's combine these two fashionable novelties into one whole.

Materials:

1. Foamiran of two colors (green, white);
2. Preparations for stamens;
3. Wooden skewer;
4. Cardboard;
5. Scissors;
6. Pencil;
7. Ruler;
8. glue gun;
9. Iron;
10. Barrette.

Working with foamiran: how to make flowers on a hair clip

To begin with, we will make a small stencil of cardboard petals. Using a ruler and a simple pencil, we measure a rectangle 2.5 * 2 cm. We draw a petal in it, cut out the stencil.

To apply the outline of a petal to foamiran, you do not need to circle the stencil with a pencil or pen and once again stain the material. Simply circle the stencil with a wooden skewer.

We will make three flowers to decorate the hair clip. One flower will need ten petals. Trace and cut out the petals.

To give the petals volume and texture, you need an iron. Medium heating required. We bring the petal close to the iron for a few seconds.

Quickly shift it into the palm of your hand and press your thumb on the middle of the petal.

We do this with all the petals.

We will get small flowers, so we need a little stamens.

Take the stamens and fix them at the base with a drop of glue.

We glue the first petal, applying a small drop of glue only to the tip. The stamens should be in the middle of the petal.

Glue the subsequent petals, observing uniformity. The flower should be even on all sides.

Since the petals are the same size, we glue them at the same level so that the lower base of the flower does not turn out to be “variegated”. In this technique, we perform three flowers.

Cut out blanks of leaves from green foamiran. We make them more openwork and realistic with the help of small cutouts along the edging.

We bring the leaves one by one close to the iron for a few seconds.

Then we give it a shape close to the shape of a real leaf, twist it a little into a tube.

When everything is ready, glue the leaves to the hairpin first, and then the flowers.

We start with the last flower.

The hairpin is ready!

Flowers on a hairpin very similar to fragrant jasmine flowers.

White flowers always look advantageous and gentle, they look like wedding, but if you want, you can paint the tips of the petals with a sponge before assembling the flower.

It is very pleasant to work with foamiran, making flowers, you feel like a sculptor creating beauty!

The master class was prepared specifically for the site Needlework Lessons.