Learning to knit and choosing two-color patterns

Learning to knit and choosing two-color patterns

The appearance of knitted products depends on the choice of quality threads by needlewomen, on their personal skill, as well as on the pattern. It is possible to obtain a huge variety of spectacular reliefs by knitting many types of loops, as well as their combination with each other. In addition, there is a technique for creating patterns on knitted fabric using threads of two or more colors. Knit with yarn of different shades according to the instructions in the pattern, and you will be able to form spectacular two-color patterns with knitting needles on knitted fabric. Using the technique of forming two-color patterns, needlewomen can knit stylish items on the simplest fabric made with stockinette stitch. In the photo below you see one example of a pattern on the front surface, knitted with threads of two colors. In this case, the drawing is made according to the diagram. You can create such a simple scheme yourself by choosing a drawing that you like.








In order to transfer such a homemade pattern to canvas, you need to master the method of making a two-color pattern. You will get this opportunity by studying all the photo and video materials in this lesson.

Types of loops in knitting two-color patterns

Beginning needlewomen can be advised to knit a two-color pattern with knitting needles using a smooth fabric, that is, stockinette stitch. This fabric is made exclusively from front loops (LP) and purl loops (IP). In this case, you just need to correctly alternate the thread colors you need at the moment. The method of alternation will depend only on what kind of pattern you need. These could be just dots, or other small relief.
The pattern in the photo is a lazy jacquard, which has the most primitive and uncomplicated patterns. Lazy jacquard is most often used for knitting children's items. But perhaps you don’t need dots, but horizontal or vertical stripes, then the alternation will be completely different. Having mastered a simple technique, move on to more complex patterns, such as geometric shapes, then snowflakes, deer and Christmas trees. It should be noted that two-color patterns are knitted not only by alternating colors, but also by using different stitches. This can be LP and IP, the technique of using yarn overs, slipped loops (P), as well as broaches. Experienced knitters often knit such motifs using more complex techniques, such as broaches, crossed and moved stitches.

Two-color patterns for children

If you look closely at the two-color themes,
, it is not always possible to determine for what age they are more suitable. Most of the two-tone motifs are absolutely suitable for both adults and children. If you need to choose a color pattern for your child, then you will probably turn to two-color knitting patterns. Choosing a knitting motif for children is much easier than for adults, because most shades, as well as many designs with colored yarn, are suitable for small citizens. We make a distinction only depending on the gender and age of the child. For newborns and children under ten years of age, you need to take yarn in very bright colors. As for older children, colorful, but more restrained drawings are suitable for them. When choosing a knitting pattern for boys, you need to focus on a theme that suits them, as in the photo.









For little princesses, bright pink and blue shades, as well as flower patterns, are more suitable.


Beginning craftswomen can be offered the simplest option for making children's two-color drawings. It consists of knitting rows alternately of two threads of different shades. We knit with different threads in even and odd rows, and we get stripes that form a two-color pattern that looks quite original. Experienced needlewomen who find such simple stripes too primitive can be offered a more complex pattern. It consists in the formation of removed loops, performed periodically, at equal distances. The second technique is knitting crossed loops, which perfectly decorate winter sweaters and hats for children, making them warm and voluminous. In this case, the shade of the thread changes after two rows, front and back, forming the original relief and volume of the fabric.



At the end of this lesson, we offer a video master class on knitting a two-color pattern with knitting needles for children. The diagram contains 14 rows, of which two are auxiliary, and 12 constitute vertical repeat. The horizontal repeat of the motif has six loops. Repeat all the steps in the video lesson to gain experience in forming a two-color motif with knitting needles. Video: Simple children's pattern

Patterns for adults

Unlike knitting patterns for children, two-color patterns for adults are knitted using multi-colored threads in calmer and muted tones. Typically, diagrams depicting geometric shapes are chosen for this purpose. This can be a mesh shape, knitted in the form of diamonds, as well as other geometric shapes, plaits and braids.








As can be seen from the attached photos, two-color patterns are made with light and dark threads, but without flashy brightness. It is necessary to note one important feature of two-color patterns, which are formed by alternating tones in rows. The fact is that their schematic drawings often do not coincide with the pattern that appears on the product. Often, each new pattern combination produces a two-color pattern that is completely unexpected.

Video: Learning to knit patterns of two colors

Patterns with removed loops: patterns and examples of knitting

Patterns with removed loops: patterns and examples of knitting

In a craft like knitting, it is important to be able to make a wide variety of patterns. Possession of this skill allows needlewomen to create a wide variety of reliefs and patterns on knitted fabric. Learning knitting techniques and techniques does not happen immediately; you need to devote a sufficient amount of time to it. Each time the range of possible patterns and techniques expands, and we have an increasingly large stock of knowledge, which makes it easier to form many products from threads using knitting needles. In this lesson we will look at the techniques and patterns with which we knit patterns with knitting needles, where there are necessarily removed and dropped loops.

Varieties of patterns

In the first part of the lesson, we will study the removed loops, and only then the lowered ones. To knit the removed loop (P), you need to remove it from the working needle and place it on the right one. In this case, the operation consists precisely in moving the same unknitted loop. As a result of this technique, elongated shapes are formed. Take a look at the video below to see some of the possible patterns with the stitches removed. This relief is called "Asters".
Video: “Asters” pattern

Video: “Honeycombs on the reverse surface”

Video: “Diagonal openwork”

Video: "Salute"

When forming a pattern from the removed P, the thread can be placed on either side of the work, in front of the work or behind it. It is necessary to note the peculiarity of the removed Ps that, by performing them with threads of several shades, we end up with patterns in the form of different geometric shapes. These can be stripes, strokes or even squares. You can see examples in the video.
Video: Lattice pattern

Pattern "Corn". In these video tutorials you can clearly see that such reliefs with the elongated loops removed create the thickest, densest and warmest knitted items. They are very lush and unusually embossed. For this reason, winter sweaters, hats and scarves are often knitted with removed stitches.
Video: Pattern “Corn”

Structural patterns with removed loops

There is a technique for pulling out removed stitches. As a result of this technique, so-called structural patterns are formed, which form protruding parts on a knitted product. These can be both bulges and depressions, as well as selected long loops located on top of the general relief. An example of structural patterns in the photo below.





As can be seen in the photo, the structural patterns are visually similar to peculiar folds, which are often used to decorate knitted fabrics. But if desired, almost every such relief can be knitted independently as the main motif. The removed loops (P) in structural patterns play the role of the main violin for the formation of a special texture. In multicolor knitting, they determine the design of colored threads into various fancy geometric shapes. In addition, skimmed stitches fit perfectly into any knitting technique because they are not subject to deformation.

Examples of patterns with removed loops

And now we will give some examples of the simplest patterns with removed loops for beginners. Examples are given with diagrams explaining the knitting technique for each specific pattern. The first pattern is an elastic band with the loops removed.

Vertical repeat consists of two rows. In the first row (P), two purl loops (IP) are knitted, then two (P) are removed, leaving the thread before work. In the second R, two IPs are performed, then two facial loops (LP). In the third R, the rapports of the first are repeated, and so on.

The next motif is called Horizontal chains of removed P.

The diagram explains that the first and third R are performed from the LP, and the second and fourth from the IP. In the fifth row we knit an IP, then a removed P, placing the thread in front of the work. The sixth P consists of a slip stitch (yarn at the back of the work), after which a LP is performed.

Video master class on knitting a pattern with removed loops

In this video master class you will see the technique of knitting a motif with removed loops. We use knitting needles to cast on the number of P, a multiple of six, plus two edges, that is, fourteen units. We will knit the first row with rib stitches, and the second row only with purl stitches. The third and fourth R repeat the first and second, that is, we knit four R in stocking stitch. From the fifth R we begin knitting the removed loops. After the edge stitch, we knit a knit stitch, followed by three yarn overs, and repeat until the end of the row. In the next sixth row, we remove the edge, throw the yarn overs off the knitting needle, and remove the P and transfer it to the right knitting needle. Only six loops are transferred in this way. We leave three of them on the left knitting needle, and place the remaining three on an additional pin before work. We knit a P from a knitting needle like an IP, after which we knit a P from a pin. This was the first repeat of the pattern with the loops removed. We perform the second repeat of the sample in the same way. After the end of the sixth P, the rapport is repeated from the first row.

Dropped loops in the pattern

Inexperienced needlewomen sometimes confuse dropped loops with removed loops, making a mistake. These are completely different types of knitting. Now we will try to explain to you what is the difference between them. It lies in the fact that the dropped loops are not transferred from one knitting needle to another, but are removed and unraveled. Sometimes knitters lower the P, making a mistake in their work, and then a defect in the form of a hole appears in the fabric. In this case, the canvas may unravel further. It will not be easy for you to “catch” the blooming parts of the canvas, and you will have to redo it entirely. But there are patterns where the dropped loops are made according to the pattern. This is done to create a special translucent openwork. Most often, dropped loops are used to form light spring and summer models, which turn out to be extremely stylish and effective. Dropped stitches can be knitted using two techniques. The first technique is to unravel them, starting from the cast-on row. This is done by simply alternating several regular and deflated P.

The second way is to bloom P to a specific point. At this desired point, you first yarn over, then knit two stitches together, leaving the total number unchanged. After this, we perform several P, and lower one P, located before the yarn over. To maintain the number of P, the necessary yarn overs are performed.






Now pay attention to how spectacular and stylish a summer scarf can be knitted using dropped stitches.

The final video tutorial shows how to knit a modern, eye-catching pattern using dropped stitches. This ornament is used to create a trim or a whole fabric, such as a scarf. The pattern is double-sided. It consists of dense garter stitch tracks, as well as transparent openwork stripes. This pattern is knitted very quickly and requires very little yarn. For the sample, we cast on any number of stitches, and knit the first four rows exclusively with stitches. In the fifth R we knit an edge P, then we perform two yarn overs, and another LP. We do this rapport until the end of the R. The next four R must be done only with knit stitches. In the first row we perform an edge stitch, and lower all the yarn overs from the knitting needle. After this we knit a knit stitch. We repeat this knitting until the end, after which we straighten the fabric. We received a beautiful openwork path located horizontally. Now, to secure it, we will perform four rows of knit stitches, after which the knitting must be repeated from the very beginning.
Video: Double-sided pattern with dropped loops

Circuit examples

Comments

Related posts:

Embroidery letters of the Russian alphabet schemes and font examples

Pattern diagram

This pattern is knitted in 3 colors with 1 color knitted in one row.

In our case, we cast on the loops in red. We knit the zero row (wrong side) purlwise. Next, repeat from rows 1 to 6.

Rapport 2 loops + 3 loops.

8. Thorns

Pattern diagram

The number of loops for the pattern is a multiple of 4 + 1.

This pattern uses 2 colors. In the scheme, white cells are white, blue cells are blue, pale green cells are NO LOOP.

Cast on the loops with blue yarn (in this case).

9. Colored waves

Pattern diagram

The number of loops is a multiple of 4 +1.

Purl the initial row (wrong side).

You can use any number of colors.

10. Two-color honeycomb

Pattern diagram

The diagram shows the front and back rows. Repeat the pattern in 4+1 loops, repeat in height from the 1st to the 12th row.

The pattern is 2-color, row 1 and 2, and row 7 and 8 with a thread of a darker color.

Instead of a second dark color, you can take a thread that is thinner, but matches the shade of the main thread, it will be a very interesting effect.

11. Two-color pattern with elongated loops

Pattern diagram

The pattern uses threads of different colors and textures. Stretch the sample a little so that the interweaving of the threads can be better seen.

The pattern repeat is 6 loops wide, for symmetry we knit 3 loops before the repeat and 3 loops after. We knit in height from the 1st to the 8th row, then from the 3rd to the 8th row.

READ THE SYMBOLS CAREFULLY

12. Multicolor braids

Pattern diagram No. 1

The diagram shows the front and back rows. Pattern repeat 11 loops. We repeat in height from the 1st to 8th row, then from the 5th to 8th row.

3.4 row - dark thread (we knit 2 rows with dark thread, removing the loops without knitting according to the diagram)

Row 5, 6 is white thread, row 7, 8 is dark again.

Pattern diagram No. 2

The diagram shows the front and back rows. Pattern repeat 12 loops. We repeat in height from the 1st to 22nd row, then from the 5th to 22nd row.

This pattern is knitted similarly to the 1st. Rows 7, 8 and rows 15, 16 are knitted with dark thread, the rest with white thread. Separately drawn cells in rows with white thread - for clarity.

ATTENTION!!! In PATTERN No. 2 in rows 11 and 19 we do these crossings like this:

1. Cross 3 loops to the left (slip 1 loop onto an additional knitting needle and leave it before work, knit the next 2 loops, then knit a knit stitch from an additional knitting needle).

2. Cross 3 loops to the right (slip 2 loops onto an additional needle and leave them at work, knit the next loop, then knit 2 loops with an additional needle).

Hello, dear friends!

I present to your attention the most beautiful two-color knitting patterns with descriptions and diagrams that I compiled on the Knitting Box website, namely (you can follow the link).

These patterns will decorate any product, and they are knitted using the “lazy jacquard” technique, so knitting them is not difficult: in each row only one color of thread is used and the pattern is obtained by removing loops in one row and picking them up in another row.

If anything is unclear, don’t hesitate to write, we’ll figure it out!

Two-color knitting patterns

Knitting pattern “Boats”

As soon as I saw this two-color pattern, I immediately decided: it will definitely be in mine! And so it happened. It is better to knit “Boats” with thin threads, then the pattern will look more expressive.

Where to use? First of all, for knitting children's clothes, and then see for yourself, because a lot depends on the choice of yarn color.

To complete a sample pattern, we cast on a number of loops that is a multiple of 6 plus 5 loops for the symmetry of the pattern and 2 edge loops (for example, 18+5+2=25 loops). And then we knit according to the pattern diagram, not forgetting that EVEN rows must be read from left to right.

Scheme of the "Boats" pattern

Unfortunately, not all symbols can be reflected on the diagram, so I highlighted the “special” places in dark blue. How to knit these loops is described in detail in the pattern description.

Description of the "Boats" pattern

• In the 1st row (gray thread): we knit 4 purl stitches, * slip 3 loops onto the right knitting needle without knitting (thread BEFORE the loops), 3 purl stitches * (repeat from * to *), at the end of the row not 3, but 4 purl stitches;
• in the 2nd row (gray thread): 4 knit, slip 3 stitches (thread BEHIND the loops), * knit 3, slip 3 (thread behind the loops)*, at the end of the row knit 4;
• in the 3rd and 9th rows (blue thread): knit all the loops;
• in the 4th, 6th, 10th, 12th rows (blue thread): We knit all the loops purlwise;
• in the 5th row (blue thread): 4 knit, *1 knit, 1 we remove, with the left knitting needle we pry up 2 broaches formed in the 1st and 2nd rows, and again we put the removed loop on the left knitting needle, then we knit the broaches with this loop TOGETHER the front one, 4 knit*, at the end of the row not 4, but 5 knit;
• in the 7th row (gray thread): 1 purl, remove 3 (thread before loops), * purl 3, remove 3 (thread before loops)*, at the end of the row after removed loops, knit 1 purl;
• in the 8th row (gray thread): 1 knit 3, slip 3 (thread behind the loops), knit 3, * slip 3 (thread behind the loops), knit 3*, at the end of row 3 slip, knit 1;
• in the 11th row (blue thread): 2 facial, 1 is removed, with the left knitting needle we pry up 2 broaches formed in the 7th and 8th rows, and again we put the removed loop on the left knitting needle, then we knit the broaches together with this knit stitch, 1 knit, *4 knit, remove 1, pick up the broaches and perform as described earlier, 1 knit*, at the end of the row we knit not 1, A 2 facial;
• in the 13th row (with gray thread):

Knitting pattern “Two-color tweed”

At first I tried to knit a sample of this pattern on needles No. 3, but it turned out something microscopic and incomprehensible - I even thought that there was some kind of mistake in the description.

When thicker threads and knitting needles were taken, everything fell into place: the pattern turned out dense and very pretty. For coats and warm jackets - just what you need!

And this is the wrong side of the pattern - boucle tweed. I don't even know which side I liked the most!

So, to knit a sample pattern, we cast on a number of loops that is a multiple of 2 plus 1 loop for the symmetry of the pattern. Next we knit according to the pattern and description of the pattern.

Scheme of the "Two-tone tweed" pattern

Description of the "Two-tone tweed" pattern

• In the 1st row (green thread): knit 1 knit, * remove 1 loop (thread BEFORE the loop), 1 knit * (from * to * repeat until the end of the row);
• in the 2nd row (green thread): 2 purl, 1 slip (thread BEHIND the loop), 1 purl, *1 slip (thread behind the loop), 1 purl*, at the end of the row 2 purl;
• in the 3rd row (with mustard thread): repeat row 1;
• in the 4th row (with mustard thread): repeat row 2;
• in the 5th row (green thread): repeat the pattern from the 1st row.

If you use the front side of “Two-Color Tweed” to knit a coat or jacket, then the turned-up lapels will show the wrong side of the pattern, which will really decorate the product, you’ll agree!

Knitting pattern “Steps”

Well, doesn't this handsome guy look like steps leading up? That’s what I thought too, so I decided to give this name to a very dense (due to garter stitch) and good quality pattern.

To knit a sample of this pattern with knitting needles, cast on a number of loops that are a multiple of 6 plus 2 loops for the symmetry of the pattern and 2 edge loops, total: 24+2+2=28 loops. And then we knit, based on the diagram and description of the pattern.

Scheme of the "Steps" pattern

Description of the pattern “Steps”

Knitting pattern “Relief waves” (1)

This cute two-tone pattern is best suited for knitting children's clothing or as a trim for women's clothing (in my opinion).

In order to knit a pattern sample, we cast on any ODD number of loops and then knit according to the pattern below and the description of the pattern, changing colors in the same way as in the pattern.

Scheme of the pattern “Relief waves” (1)

Description of the pattern “Relief waves” (1)

• In the 1st row (green thread): knit all the loops;
• in the 2nd row (green thread): we knit all the loops purlwise;
• in the 3rd and 4th row (mustard thread): 1 knit, *1 slip (thread BEHIND the loop), knit 1* (from* to* knit to the end of the row);
• in the 5th row (with mustard thread): all loops are knit;
• in the 6th row (with mustard thread): all loops are purl;
• in the 7th row (green thread): 1 knit, *knit 1, slip 1 (thread behind the loop)*, at the end of the row knit 2;
• in the 8th row (green thread): 1 purl, knit 1, * slip 1 (thread behind the loop), knit 1 *, at the end of the row purl 1;
• in the 9th row (green thread): repeat the pattern from the 1st row.

Knitting pattern “Relief waves” (2)

Tricolor pattern "Relief waves" (2) outwardly very similar to the previous one, which is why it received the same name, but there are still differences, and not only in the fact that a third color is added.

To knit a sample of a three-color pattern, we also cast on an ODD number of loops. And then we knit according to the pattern, not forgetting to change colors.

Scheme of the pattern “Relief waves” (2)

I didn’t create a cumbersome description for this pattern, since the diagram is very simple, and everything is clear!

Knitting pattern “Florentine frieze”

Yes, yes, this is exactly the beautiful name this no less beautiful two-color pattern with removed loops has.

Armed with a description of this pattern, of which there are many on the Internet, I started knitting a sample and... failed. The appearance of my pattern did not fit in with the one whose photo I fell in love with immediately and forever.

I had to sweat a little to find the typo in the description. And then this pattern diagram with explanations was drawn up.

To knit a sample pattern on knitting needles, cast on a number of loops that are a multiple of 4 plus 1 loop for the symmetry of the pattern and 2 edge loops, for example: 20+1+2=23 loops.

Scheme of the Florentine frieze pattern

• Even rows are read from left to right from the 6th loop;
• you don’t need to pay any attention to the white cells in the pattern, I just wouldn’t have put the yarn over on the 6th row any other way;
• the white threads of the pattern sample in the diagram are indicated in light pink so as not to be confused with empty cells;
• V On the 7th row we do not knit the yarn overs of the previous 6th row, but throw them off the knitting needle to make longer broaches;
• dark pink square: 1 we slip the loop onto the right knitting needle, with the left knitting needle we pry up the broach formed under this loop in the 6th row and again put the removed loop on the left knitting needle, then we knit the broach with this loop TOGETHER with the front loop, as in the “Boat” pattern;
• after On the 12th row, the thread colors CHANGE, and the pattern is repeated from the 3rd row of the pattern.

These are the two-color knitting patterns with descriptions and diagrams that I have prepared for you today! I hope they will please you and lift your spirits at least a little! And I can only learn about this from your reviews!

Don’t be afraid to leave your name and email address when writing a comment: I won’t write you annoying letters, and no one else will know your email address!

The skill of knitting is an amazing art. Once you get it, it is impossible to recover. That is why for many, a passion for this craft quickly becomes an opportunity to implement interesting ideas in creating clothing models. But professionalism begins with simple skills and techniques that allow you to quickly move beyond the amateur level and turn a craft into an art. The topic of today's publication is how to knit a two-color pattern with knitting needles varying degrees of difficulty, what rules apply when making such knitwear and how to make the work easier. Let's get acquainted with the descriptions and diagrams of some patterns, which are based on the interweaving of two colors.

Two-color lazy knitting patterns

The simplest in the huge segment of two-color patterns are the so-called lazy patterns. These are elementary patterns based on the alternating use of threads of different colors, i.e. one or several rows are made with yarn of one color, the next or several next rows with a thread of a different color. Hence the name of the lazy pattern, since in jacquard patterns the work is complicated by the fact that both threads are used in constructing one row, alternating in knitting loops.

Rules for knitting two-color patterns

Before moving on to the description of two-color patterns, let's learn some rules:

Yarn colors are selected based on your own preferences, but slightly muted tones, rather than oppositely bright ones, look better in knitted fabric;

Thread of both colors is selected according to the same thickness and yarn structure. Often, failure to fulfill this condition negates all the efforts of the master: the canvas will not look organic;

Beginning needlewomen should choose yarn of medium thickness (300-400 meters in a standard 100-gram skein), which is considered the most optimal and convenient. The best knitting needle size for it is No. 2 -2.5;

The thread tension should be adjusted - do not tighten too much, but do not loosen too much.

Video: two-color knitting

So, let's start with the simplest knitted fabrics. For example, this relief pattern, often used in outerwear patterns (cardigans, coats, hats or scarves), is knitted simply, but looks very decent.

A pattern such as a honeycomb is also common. .

Another popular pattern, “two-color granules,” imitates the fabric weave familiar to us from classic Chanel-style jackets. The fabric made with this pattern holds its shape perfectly; it is both dense and elastic.

Two-color knitting patterns for children's things

Knitting for children is a separate block in needlework. An important feature of two-color children's patterns is the selection of color combinations suitable for a particular age. After all, it is well known that colored patterns that look great on children’s suits look very ridiculous on models for adults. For a young age, pastel colors are considered to be the optimal colors; older children are more impressed by bright, cheerful colors in various combinations. And the best pattern structure for children's clothing has become small patterns. It is for children that lazy two-colors are preferred, since many of them are quite dense and, therefore, warm.

This simple knitting patterns, which are based on alternation rows with various options for removing loops without knitting.

An example would be pattern with elongated loops

When performing purl rows (1st and 5th), to maintain an even structure of the pattern, the loops are knitted as follows: knitted in the previous row on the front wall, removed on the back wall.

Two-color children's knitting patterns diversify textured patterns. For example, lattice - a simple but interesting pattern with a textured base. This pattern also does not take into account the edges (they are done together with the drawing).

Of dense patterns, they are famous for their remarkable unusual texture.two-color stars.

For the sample, cast on the knitting needles a number of loops that are a multiple of 6 + 4 loops for the symmetry of the pattern + 2 edge loops.

Many craftswomen are passionate about making fabric decorated with braids and arans. For knitting lovers two-tone braids We offer a simplified version of the “caterpillar” relief braids.

The number of loops for the sample should be a multiple of 6 + 2 edge loops. The first 2 rows are basic and they are knitted like this (color A): 1st row with knit stitches, 2nd row with purl stitches.

Caterpillar braid pattern

Video about the two-color Braid pattern

Not only knitted fabrics can be made by interlacing two colors. The two-color patent elastic band looks great. A similar pattern is made on double-pointed knitting needles. The pattern requires an odd number of loops.

The lazy method is often used to create patterns with repeating patterns called jacquards. This method significantly simplifies the work, since with a thread of each color only the corresponding loops of the front and back rows are knitted according to the pattern, without knitting those that require yarn of a different color. They are performed in the next two rows, and those knitted earlier are removed.

Thus, alternating the execution of each two rows with a different color, jacquard patterns are knitted, and as a result, a dense knitted fabric is obtained, examples of which we present. Jacquard patterns are diverse: these include geometric shapes, stars, zigzags, and diamonds.

The “lazy” option is not just the easiest option for making jacquard patterns, but also creates a more accurate fabric, since there are no thread pulls that are formed when making a classic jacquard. Starting work, the first two rows are knitted as base rows in one color, and then proceed to the design. Knit stitches are knitted on the front side, and purl stitches are knitted on the back side.

Rules for performing a lazy jacquard pattern

There are several rules for knitting lazy jacquards, the implementation of which will make the fabric beautiful, even and neat:

do not remove 2 loops in a row;

the same loop should not be removed repeatedly, it is performed in the purl row;

at the beginning and end of the row, in addition to the edge loops, you can make one more additional loop, which does not participate in the pattern, but makes the fabric neater.

One of the varieties of such jacquards is the legendary “houndstooth” pattern, a knitting pattern and pattern of which we demonstrate in the publication. The number of loops for the sample is 6 + 2 edge loops.

Scheme of the drawing

Video about lazy two-color knitting patterns

Making knitted models in various color variations is acceptable not only for children's clothing models. For example, various zigzags and missoni are extremely impressive patterns that have long been successfully used in the production of women's clothing, in particular, dresses and skirts.

Patterns imitating waves and zigzags are knitted from yarn of two or more colors. To make a knitted fabric according to the presented sample, the number of loops must be a multiple of 14 + 1 to achieve symmetry of the pattern + 2 edge loops. Knit as follows:

Popular designs are often diversified by adding openwork, which makes them even more elegant and graceful. For example, missoni patterns with openwork stripes, which are extremely in demand today, noticeably “lighten” the canvas, making it soft and floaty.

Missoni is not only popular, clothing models made with similar patterns are always unique and interesting. Like all patterns with a wavy texture, they can not only be two-color, but also combine up to a dozen different colors. The selection of shades for such paintings is individual, but even the craziest combination of shades often attracts the eye. There are many options for alternating color stripes, their width can be different. It is only important that the pattern is zigzag.

Knitting pattern

Practical application of two-color patterns

Having considered the presented two-color knitting patterns, diagrams and descriptions, we note that there are a lot of techniques for making knitted fabric, as well as patterns. What can we say about clothing models knitted with two-color patterns!

For example, a sweater for a boy, created by patent elastic, ideally combines ease of execution, practicality of the solution, attractiveness and functionality of the model. To make sizes 32-34 you will need 150-200 grams. yarn of blue and dark blue colors (wool blend 250 m/100 g), knitting needles No. 2 and 2.5, auxiliary knitting needle No. 2.5.

The sweater is knitted with a patent elastic band, the knitting pattern of which is indicated in the article. The knitting density according to the pattern is 22 loops and 52 rows in 10*10 cm. Based on this pattern, overlaps are made to form large braids. “Braid” of 12 loops:

6 pet. leave on the auxiliary needle while working, 6 stitches. knit with patent elastic, then knit 6 stitches. with an additional knitting needle.

Back: 94 pet. cast on knitting needles No. 2 and, knitting with a 1x1 elastic band, knit 4 cm. Then switch to knitting needles No. 2.5 and knit with a patent elastic band according to the pattern:

56 rows of two-color patent elastic (DPR);

57th row: edge, 16 pets. DPR, “braid”, 12 pets. DPR, “braid”, 12 pets. DPR, “braid”, 16 pets. DPR, regional;

58-92nd rows: DPR;

93rd row: edge, 28 pets. DPR, braid, 12 pets. DPR, braid, 28 pets. DPR, regional;

94-128th rows: DPR;

Row 129: 16 stitches. DPR, “braid”, 12 pets. DPR, “braid”, 12 pets. DPR, “braid”, 16 pets. DPR, regional;

Having knitted 40-44 cm, bind off the middle 22 loops and finish the piece by sewing each side separately and casting off 3 p., 2 p., 1 p. in each front row. Close the shoulder seam (30 p.) 2 cm from the neck line.

Before: performed in the same way as the back, only the neckline begins at a height of 36-40 cm. First, close 14 central loops, then in every 2nd row, decrease once - 4 p., 3 p., 2 p., 1 p. The remaining 30 loops of each shoulder section are closed at the same height as the back.

Sleeves: for elastic (knitting needles No. 2), cast on 45 loops, knit 4 cm. Continue on knitting needles No. 2.5 DPR. On both sides for bevels, add 1 loop 19 times in every 8th row. At a height of 30-32 cm, the sleeve is closed.

To process the neckline, the loops are collected on circular knitting needles, having previously sewn the shoulder sections on one side. Make a binding; if desired, you can knit a high collar. Having closed the loops, sew the second shoulder section, side seams, and sew in the sleeves.

Knitted socks with two-tone pattern

Not only clothes are created using two-color knitting. Models of socks and house shoes made from yarn of two colors have long become an excellent alternative to store-bought items. A good example is the socks shown in the photo (size 37-38).

They are performed like this:

Yarn of two colors (but the same texture) of medium thickness (200 m/100 g), knitting needles No. 2.5.

Cast on 49 stitches with thread C and knit 2 rows, and then, changing thread (B), knit 2 more rows.

Row 5 (thread C): edge stitch, *slip 1 loop, knit 1.* knit the last edge stitch purlwise. As a result of alternation, loops of different colors will appear on the needle.

6th row (C): edge, *1 remove NPR, 1 person.*

7-8, 11-12 rows (thread B): all persons.
Row 9 (C): edge, the next 23 loops are knitted, repeating the algorithm * slip 1 loop, knit 1. * Then the 24th. remove the loop, and from the 25th knit 9 loops (knit, yo, knit, yo, etc.), then until the end of the row * remove 1 loop, 1 knit*

Row 10 (C): work in the same way as row 6, but the central inc stitches are knitted.

Repeating the sequence of knitting rows from the 9th to the 12th, knit up to 7 repeats of increase, i.e., a chain of 7 “bells” is formed in the center of the sock. The next 4 rows are performed as rows 5 to 8.

At this stage, the knitting of the top of the sock is completed. There are 98 stitches on the needles. The trail and heel are made on 10 central loops. There are 44 loops left on each side ((98 - 10)/2).

Knit 44 sts + 10 sts, knit the next 2 sts together. The work is turned and 10 loops are knitted, and one of the next 2 is knitted again. Continuing in this manner, knit until the side loops run out. Having finished the work, the loops are closed and the heel is sewn.

We have talked about only a small part of the wonderful art of knitting in two colors. By putting the listed techniques into practice and using them for your own ideas and subsequent implementation in models, you can significantly improve your level of skill and learn how to create unique knitwear.