New Year's decorations from threads. How to make a Christmas ball from threads Making DIY Christmas toys from threads
Helpful Hints
Snowmen from threads
From ordinary threads you can create very beautiful crafts.
By the New Year, it is customary to decorate the Christmas tree with various toys. From threads and glue, you can make such popular Christmas toys as balls.
In addition, threads and glue can be used to create Christmas trees of different colors and sizes, and to complete the picture, you can put a snowman by the Christmas tree, which can also be made from threads.
On our website you will also find:
- DIY Christmas monkey craft
- DIY Christmas balls
- How to make a Christmas tree with your own hands
Shiny ball of thread and PVA glue
You will need:
Several balloons
PVA glue
white thread
sequins
Small bowl.
1. Pour PVA glue into a bowl and dilute it with a little water.
* If the glue runs out and you haven't finished the job yet, you can add more water.
2. Inflate the balloons. Their size directly affects the size of your future Christmas balls.
3. Prepare a white thread, tie one end to the tail of the balloon and start wrapping the thread around the entire balloon. Cover the surface of the balloon as much as possible.
4. Dip the ball wrapped with thread into a bowl of PVA glue and water, and start turning it so that the glue is absorbed into the thread from all sides.
5. Before the glue dries, sprinkle glitter on the balloon.
6. So that the ball can dry, you can hang it on a stretched thread with a paper clip or put it on a jar (without a lid).
7. After 24 hours, remove your Christmas decoration and use scissors or another object to pop the ball inside. Gently pull out the ball, it will be slightly glued to the thread.
* Having made several of these shiny balls, you can decorate the Christmas tree or the interior. If you get several branches, then you can hang Christmas balls on them, decorating the branches with tinsel.
DIY Christmas balls from threads
You will need:
Air balloons
Thick threads (for knitting, for example)
PVA glue
Plastic bowl or glue cup (or other container that you can poke a couple of small holes into)
thick needle
Scissors.
1. Inflate the balloon to the desired size and tie a ponytail. If you want to make it more round, press it down with your hands.
2. Using a needle and thread, pierce a plastic bowl or cup. This should be done as close to the bottom as possible. You can also simply dip the thread into a container of glue.
3. Pour PVA glue into a container and dilute it with a little water to save glue.
4. Slowly pull the thread through the glue container and start winding the ball with it. Since you will be removing the ball after the glue dries, it is better to leave some space near the tail in advance to pull it out.
5. After you have wrapped the ball tightly, cut the thread. You can leave a small tail to make a loop and hang a ball on a Christmas tree, for example.
6. Leave the ball to dry. In a natural way, it will take 24 hours or a little more. You can speed up the process by placing the balloon near a radiator or drying it with a hair dryer.
7. When the glue is fully cured on all sides, pierce the ball and carefully pull it out.
8. If desired, you can decorate the balloon. Try painting it, sticking plastic or paper snowflakes, sequins, covering it with sparkles.
Another option:
How to make a ball of thread: gift wrapping
You will need:
Large ball of thread
Acrylic paint and brush
PVA glue
Screwdriver
Scissors or utility knife
Long piece of tape.
1. Inflate the balloon and wrap it with thread as tightly as possible. In some places, to secure the thread, add a little PVA glue.
* The main thing is to wrap the ball so that nothing is visible through the thread. You can cover all the threads with a thin layer of PVA glue.
2. Using a brush, apply acrylic paint to the thread. You should not save on paint, because in addition to color, it also fastens the threads well.
3. Hang the fumbling to dry overnight. If there is nowhere to hang it, you can put it on the neck of the jar.
4. When the paint is dry, pop the ball and pull it out of the "cocoon".
5. Cut the resulting cocoon in half with scissors or a clerical knife. To make this easier, wrap the ball with one thread of a contrasting color and start cutting along this line.
6. Using a screwdriver, make several symmetrical holes on both sides of the cocoon.
7. Put gifts wrapped in beautiful paper inside.
8. Pull the ribbon through the holes crosswise, and at the end tie it into a bow.
Christmas balls of thread: foam ball with jute rope
You will need:
Styrofoam ball
jute rope
PVA glue
Decorations.
1. Wrap a foam ball with a jute rope, attaching it with PVA glue.
2. Decorate the balloon however you like. Use glitter, stickers, sequins.
In the same way, you can make a Christmas tree, only instead of a ball you use a foam cone.
Thread balls (video)
Option 1.
Option 2.
DIY balls of thread (photo)
Christmas tree made of threads. Option 1.
You will need:
Scissors
regular tape
PVA glue
Decorations.
2. Wrap the cone with cling film or wide tape.
3. Pour PVA glue into a bowl (you can dilute it with a little water).
4. Dip the thread into the bowl of glue and wrap it around the cone, starting at the top. The thread should not be squeezed hard - enough glue should remain on it to attach well to the cone.
5. Leave the craft for 24 hours to allow the glue to dry or you can use a hair dryer to speed up the process.
6. After the glue has dried, carefully remove the Christmas tree from the threads from the cone.
7. You can start decorating your Christmas tree. Any jewelry is suitable for this - sequins, sequins, buttons, beads, pompons, etc. You can also place an electric candle under the tree to make it look even more beautiful.
Christmas tree made of threads with your own hands. Option 2.
You will need:
Scissors
Food wrap or wide tape
regular tape
PVA glue
Garland with lights.
1. Make a paper cone. Make small incisions from below, leaving 2 cm between them. The incisions are needed so that you can stretch the thread between them.
2. In a bowl, dilute the PVA glue with water.
3. Begin to soak the thread with glue and wrap it around the cone, threading the thread through the notches and wrapping the entire cone. Leave the glue to dry.
4. When everything is dry, carefully remove the tree from the threads from the cone. To make this easier, cut off the edge of the base of the cone (where the cuts are). Start turning the cone slowly so that it comes off.
5. Glue, sew or staple the ribbon to the bottom of the tree.
6. Put a garland with lights inside the Christmas tree. If the bulbs are small, then they can be fixed inside the Christmas tree using thin wire or Christmas tree decorations, which have wire mounts. You can also use staples.
Here is another photo tutorial:
Beautiful white Christmas tree made of threads. Option 3.
How to make a knitted Christmas tree from threads for the New Year
There are plenty of Christmas toys in every house, but if we have children, we still make New Year's toys with our own hands every year. The master class that we offer today will allow you to make a lot of Christmas decorations at once with almost no cost. These paper and thread toys can be hung on the Christmas tree, tied into a garland for home decoration, or taken to kindergarten as crafts to the New Year.
We will need:
- jute threads
- A4 paper (newsprint, writing, office)
- needle 1.5–2 mm
- glue (silicate and PVA)
- tassel
- 1 tsp instant coffee
- 100 ml water
- Knitting
- scissors
- ruler
- clothespins
- jewelry (rhinestones, beads, lace)
- In order to make stars, you need to twist the tubes out of paper. Cut an A4 sheet in half lengthwise. And we wind the paper on the knitting needle at an angle of 45 degrees.
- Press the paper firmly against the needle. We drip a little PVA glue on the corner of the sheet, press it. The first "tube" is ready. You need two tubes for each star.
- Color the tubes brown. This can be done in different ways. I offer you the easiest and most affordable. We take 100 ml of warm water and dissolve 1 teaspoon of coffee in it. Using a brush, evenly soak the tubes with coffee solution and put to dry. The remaining solution is not poured out, it will still be useful to us.
- When the tubes are completely dry, you can get to work. We measure three equal segments on the tube. In our case - 9 cm. We make triangles from the tubes. Glue the remaining tip with silicate glue. For a few seconds, fix with a clothespin.
- We glue two triangles together - so that we get a six-pointed star.
- We apply a little silicate glue to the tips of each asterisk. We take jute threads and wind them around a paper star. We move counterclockwise, and wrap the tips of the stars clockwise.
- We wind until we get a star. We finish winding the threads where we started. We cut the thread and glue its tip with silicate glue on the reverse side.
- We thread the thread into any eye of the asterisk with a loop, tighten and tie the ends. Here are the stars we got.
- You can use colored threads for knitting instead of jute threads. In this case, paper tubes do not need to be painted.
Comment on the article "How to make Christmas decorations from paper and thread: a master class"
How to make Christmas decorations from paper and thread: a master class. DIY Christmas toys: stars on the Christmas tree. Squirrel with acorns: New Year's toy and experience in physics. New Year's crafts on the principle of a balancer.
Ceiling, rope .. Christmas tree. Interestingly, how do you technically imagine how to attach a Christmas tree to the ceiling? so the point is precisely New Year's crafts with your own hands: ideas on how to independently crochet openwork Christmas toys - balls and hearts.
Craft according to technology class 2 "basket of flowers": they gave out 2 sheets, the child only understood that it should be glued onto cardboard. From the received, assemble the panel "basket of flowers" Strelka - you need to wind threads on it, so that it is more convenient to wrap it. Master - class: paper flower.
New Year's hand-made articles. New Year's toys and decorations for the house. Volumetric New Year's crafts "Christmas tree ball". Many of you spend creative minutes or even hours with your children.
Christmas tree toy - soccer ball. ... I find it difficult to choose a section. Foreign online shopping. Buying goods in foreign online stores: selection, payment, delivery, promotions and special offers.
The promised tree for New Year's I'm ready. I'm showing off! :about). Mary the artisan: embroidery and needlework. Cross-stitch, needlework, patterns for embroidery, knitting, sewing. The promised tree for New Year's I'm ready. Well, here she is. And I don’t even know, it seems like I need to stuff more so that the corners don’t sag. And with ...
DIY Christmas decorations: a snowman, Christmas balls and stars. How to make a toy for the New Year tree with your own hands. The New Year is approaching, it's time to prepare gifts and buy Christmas tree decorations. Send photos of your baby's New Year's creations...
DIY toys: tights dachshund and pom-pom caterpillar. Especially for frosty days, we have in store two very cozy ones - a caterpillar made of woolen threads and a dachshund. A master class from needlewoman Irina Shilova will show how to make an angel on a Christmas tree with your own hands.
DIY Christmas decorations: templates and stencils. Partridge - paper craft for the Christmas tree New Year's stencils - for Christmas tree toys and wrapping paper.
Master class with photo. green and white organza. barbecue sticks. threads Paper crafts with your own hands: a paddle turntable. How to make a do-it-yourself spinner We can take ready-made green colored paper and stick it on cardboard, or we can do it ourselves ...
Girls, tell me how you can make a beacon for scissors? I've seen a lot of people, it's very beautiful, but I can't understand the execution technique. Or if it is possible, at least roughly explain the principle of how to do it. I really want the same beauty for myself, please share!
New Year's toys with your own hands: skates from paper clips. Christmas cookies with colorful ice cubes. Decorate the Christmas Tree with Beautiful Stained Shortbread and Sugar Cookies for decoration 2 (16 oz) jars of white frosting Candy for decoration (we...
Christmas trees with their own hands. Do you make crafts for the New Year with your children? New Year's needlework: we sew toys and decorations. Such a little thing can be handed over personally, or you can hang it on a Christmas tree, providing a card with the addressee's name.
But I finished the second toy just yesterday. This is a mouse that I embroidered and sewed according to my own pattern. And HERE I posted step-by-step photos with explanations of how I sewed the toy. The snowman also sewed, so it will do as an instruction for stitching any ...
Toys and games. Child from 3 to 7. Education, nutrition, daily routine, attending a kindergarten and relationships with caregivers, illnesses and physical development of a child from 3 to 7 years. Section: Toys & Games (Does anyone have a good link to Christmas tree crafts?)
Some of the toys are loved, can be used as game pieces, etc. But here are the ones that don’t make any sense. We have a compartment in the IKEA hanging rack specifically for toys from kinders. Easter eggs for the holiday table and as a gift. Master class with photo.
Master class: Christmas tree in English (in English) MK: we braid a Christmas ball with beads MK: weave a snowflake from beads [link-1]. I want to try to make Christmas decorations from beads, based on ordinary Christmas balls, but not Here there are such stylish balls...
Such toys knit! You can be awesome. Then they sell it in passing trains, and secondhand dealers also deliver washcloths all over Russia and sell them for good money. DIY educational toys. Toys from socks, paper, salt dough How to make an amigurumi doll?
The first-grader son was asked to make a model of the sun. it’s clear what I have to do, but I don’t even know which side to approach? what to do? what should this building look like? maybe someone did? I beg you, advise something please.
And we also made from threads. They inflated a balloon to the desired size, took glue in a jar (there are such jars, they are plastic), a skein of simple threads No. 40 will be fine, insert the tip of the thread into a needle, pierce a jar with We made from paper and plasticine\u003e.
How to make a New Year's toy from threads and glue with your own hands? In fact, there is more than one master class that talks about this in detail and in detail. If you look at the photos and thematic videos presented in this material, it becomes clear that such crafts are not only easy to make, but in the end they turn out to be stylish and beautiful.
Probably the most popular option in this regard is a do-it-yourself ball of thread. How to make this Christmas decoration so that it turns out to be original, beautiful and just stylish?
DIY New Year's toys from threads
Shiny Ball #1
To work on this craft, you need balloons, PVA glue, as well as white thread, sparkles and water, a plate in order to pour glue into it. Glue must be diluted with a little water. If during the process the glue starts to run out, then add water to it. Decorate both the Christmas tree and the room.
Inflate the balloons to the size you want to end up with. The creation of this craft from threads begins with the fact that you will need to tie a white thread to the tail of the inflated balloon and start wrapping the balloon with thread. Then dip this blank into a bowl of glue diluted with water.
Be sure to rotate the craft so that the glue soaks the threads on each side. Before the ball dries, additionally sprinkle liberally on each side with glitter. Hang the craft to the surface until completely dry. The New Year's toy will be completely ready after the ball is specially burst inside and pulled out of the blank.
Ball #2
In many ways, the first and second New Year's crafts are similar, but there are differences already in the final version. To work, you will also need balloons, as well as dense threads (in the first version of the craft, the threads could be ordinary), PVA glue, a glass for glue, a thick needle and scissors.
Inflate the balloon, getting the size you want to see as a result of your craft. Tie tightly so that the workpiece does not let air through. Now pierce a plastic cup with a needle into which a thread has already been threaded. Pour PVA glue into a glass, diluting it with a little water.
Pulling the thread through a glass of glue, wind it around the ball in a chaotic manner. When the whole ball is wrapped, leave a small tail and cut the thread. Leave to dry in a vertical position for a day. When the glue is completely dry, pierce the ball inside and get it out.
Advice! Additionally, this ball of threads can be decorated with snowflakes, sparkles, beads or beads, Christmas tree tinsel.
Gift packaging
The photo shows that Christmas decorations can be not only excellent products in themselves, but also an addition. For example, an item made in this way will be a great addition to gift wrapping.
To work, you will need a ball, a ball of thread, acrylic paint with a brush, glue. You will also need a screwdriver, scissors, a long piece of satin ribbon. Traditionally, inflate the balloon and wrap it tightly with thread. Fix the thread with glue only in some places, so that in the end it does not move out. It is extremely important to wrap the ball so tightly that nothing can be seen through the threads. Then cover the threads with a thin layer of glue.
Apply acrylic paint to the threads using a brush. Remember that the paint here not only gives color, it also additionally holds the threads together, so you should not feel sorry for it. Hang the balloon overnight to dry well. Then carefully pull out the balloon itself from the cocoon. Next, cut the cocoon into two parts, make symmetrical holes on both sides with a screwdriver. Now put a gift inside, and then fasten the two parts of the ball, tie a beautiful satin bow around the circumference. How to do
If you are wondering how to make a New Year's toy, then the New Year is approaching. A very simple and fast way, which is gaining popularity, how and from what to create with your own hands is to make bright and stylish New Year's crafts from threads and glue. No special skills are required when working with threads, and the toys turn out to be beautiful and fashionable. They will not only decorate the interior or the Christmas tree, but will also be great gifts.
So, to make a ball of thread with your own hands, a star or even a heart, you will need a minimum of materials and tools, a great desire, a good mood and just a little free time. There are various options for working in this technique, but the result is excellent and, which is very important, right from the first time.
Options for making Christmas toys with your own hands from threads
balls
This is the easiest way to work with thread to get stylish Christmas balls. If you make a lot of such balls, then you can use them for garlands and just for decorating the festive room as a whole.
To work, you will need to buy inflatable balls (put them on small to a round state), any threads and PVA glue, a container for glue. By the way, it is recommended to take threads of different thicknesses to make the balls more fun. Also, after the end of the main work, it takes 10-12 hours for the workpiece to dry completely and be ready to be used for its intended purpose.
Pour PVA glue into a container and dilute with a small amount of water. Inflate the balloon and, passing the threads through the glue in a chaotic manner, fasten them to the balloon until there are almost no gaps left on it. Then hang the ball and let dry. After that, the ball, which is lowered inside and carefully removed from the workpiece. with your own hands.
Important points on how to make toys from threads correctly:
1. The thread must be moistened with glue, but the glue must first be diluted with water. Because if you ignore this advice, then the glue will seize strongly and then it will be impossible to remove the thread ball from the balloon blank.
2. Do not cheat and coat the balloon with glue, then wind the threads around it. Because, this will leave large free areas, and the glue, spreading over the ball, will not be able to saturate the threads in sufficient quantities and the New Year's toy will eventually turn out to be not neat.
3. Alternatively, you can pour a little water into a tube of glue, then gently pierce it with a needle and draw a thread right from the inside before winding it onto the workpiece. This will speed up the process of work and allow everything to be done as accurately as possible.
4. The larger the balloon, the more threads are required to work, the longer the workpiece will dry.
Snowflakes
They look beautiful, it can be seen in the photo, such crafts from threads. It will be necessary to initially make the shape of a snowflake from the wire, and then, using colored threads, wrap it around. Additionally, decorate the snowflake with sparkles, tinsel. After complete drying, tie a ribbon, and then hang it on a Christmas tree, on a window or on curtains, and pack it as a gift.
Advice! From a large number of snowflakes or balls made in the described way, you can make a stylish holiday garland. Moreover, the balls can be attached to ready-made and burning bulbs of an ordinary electric garland, it looks incredibly stylish and beautiful, creating an atmosphere of New Year's magic and a Christmas miracle around. How to DIY
Not far off is the New Year holidays. It's time to think about decorating your home or class, prepare gifts for loved ones. A Christmas tree and balls are indispensable attributes of the New Year. A master class on making New Year's crafts from threads is quite simple, so both adults and children can handle it.
1:1042 1:1052Thread balls - master class
1:1118 1:1124 1:1134Let's start with the simplest crafts - balls of thread. They are airy, light, do not break, and their size depends only on your desire!
1:1367To make these balls, you will need:
1:1447- glue “office” silicate or PVA glue
- long needle,
- threads of different colors
- and various little things for decoration (beads, rhinestones, foil, rain, bells, etc.)
Inflate a balloon of the desired size. We thread the needle and pierce the bottle of glue with it, now the thread will pass through it and immediately become saturated with glue. We begin to wrap the ball with sticky thread. Then you have to wash your hands, because all the fingers will be in this “liquid glass”.
1:22931:9 1:13 1:23
You can do it differently. Wind the threads on the ball turn by turn, and then, from above, coat the threads with glue.
1:227 1:237 1:241 1:251When the glue dries, pierce or gently deflate the ball and pull it out. Then decorate as you wish. We filled this balloon with a shiny “rain” (it will be better seen if the balloon is made more transparent), glued stars and foil flowers on top, and tied a mini bell on the bottom.
1:839 1:849 1:853 1:863 1:867 1:877Christmas tree made of threads - master class
1:947 1:953 1:963For work you will need the following materials:
1:1050- floss or knitting threads (thick ones are easier and faster to work with),
- food film,
- Whatman A1,
- glue,
- brush,
- scissors,
- ruler,
- compass,
- pencil.
- Ribbons, tinsel, toys, sparkles, etc. are suitable for decoration.
Take whatman paper, measure a distance equal to 48 cm, divide it in half. Set the compass to the resulting center and draw a circle. Cut it out by first marking four equal parts on it with a ruler.
1:18651:9 1:13 1:23
Cut out one piece from the mold. If you want the future tree to be narrower, then cut two parts, leaving half a circle.
1:244 1:254 1:258 1:268Make a cone by folding the resulting craft blank. Apply glue to the joint to hold the shape.
1:454 1:464 1:468 1:478Take cling film and wrap around the cone.
1:560 1:570 1:574 1:584Dilute glue with water. Dip the threads into the resulting solution, wet them and randomly wrap them around the cone. You can wear disposable gloves to protect your hands from the glue. The Christmas tree does not have to be green, so the threads will suit absolutely any color and any thickness.
1:1096 1:1106 1:1110 1:1120Wind the threads moistened with glue until the tree is dense enough. If there are few threads, then the craft will not be able to take a stable shape.
1:1409 1:1419 1:1423 1:1433Leave the Christmas tree for a while to dry and become stable. After a few hours, carefully pull out the cone and peel off the film from the threads. The Christmas tree is ready!
1:1753Inside the finished Christmas tree, you can place an LED candle or a New Year's garland, and fancy openwork shadows will decorate your home.
1:235 1:245 1:249 1:259 1:263 1:273If desired, the craft can be decorated. Glue tinsel or toys on top, sprinkle with sparkles. It is easy to make bows from ribbons.
1:503 1:513 1:517 1:527 1:531 1:541 1:545 1:555In addition, in addition to balls and Christmas trees, according to the same principle, you can make, for example, an angel from threads and glue.
1:744A very small ball is inflated for the head (such are obtained from fragments of bursting balls, for example :)), which, after the threads have dried, is pulled out.
1:1024But for the torso, we took a transparent plastic plate (peeled it off the box with a toy), rolled it into a cone, fastened it with a stapler in two places. Having started wrapping the body with threads, we realized that they would hold on only if they were wrapped from all sides (and not just from above, as we planned), that is, it would not be possible to pull out the cone later. But in principle, this is not necessary, because it is transparent. The wings of an angel are cut out of foil.
1:1805 1:9 1:13 1:23But we made such a snowman from threads for a competition in kindergarten.
1:152For a hat, they wrapped a measuring cup of medicine, after the threads dried, they pulled it out, cutting off the bottom of the threads from below. For the “carrot”, they also wrapped a small cone of film. Support - a cover from a coffee jar. Here is such a translucent snowman turned out:
1:646 1:6591:669 1:679 1:689 1:699
Dare and create from threads everything that your imagination inspires you!
1:817 1:827 1:831 1:841 1:845 1:855 1:859 1:869 1:873 1:883 1:887 1:897 1:901 1:911
3:9
7:9
