It is the tool with which magic is performed. Anyone who has the ability to make objects levitate with the spell "Wingardium Leviosa" or open locks by saying "Alohomora" at the age of eleven receives his own magic wand. Some especially powerful magicians can do without this device in certain cases.

In the UK, only one master is engaged in the production of magic wands from the world of Harry Potter - Mr. Ollivander. American magicians can do without them at all, but in order to produce spectacular high-level spells, such a tool is still needed. In general, there are four wand makers in America.

Harry Potter wands

The magic wands of all allow you to focus the attention of the wizard on any object and direct the effect of the spell on it. Hermione's wand was made from a vine with a dragonstring core, and Ron used a magic wand that he inherited from his older brothers, it was an ash tool with unicorn hair. Due to the fact that this wand did not choose the Weasley, it did not have all the possible power and hardly obeyed him.

Harry Potter's wand was eleven inches long, made of holly. Inside it was a phoenix feather that belonged to the headmaster of the School of Witchcraft and Wizardry, Albus Dumbledore. The twin of Harry's wand was the tool used by the main villain - Voldemort or "He Whose Name Must Not Be Named." The only difference is that Tom Riddle's wand (later he changed his name to a more sinister one) was made of yew.

Magic wand manufacturers

The most famous (and only) manufacturer of Harry Potter wands was Garik Ollivander. This old master owned a shop in Diagon Alley, where he sold his unusual goods. It is known that his family was engaged in the manufacture of these magical items long before the advent of our era.

At the beginning of the story, the owner of the shop is already very old, but his mind is still clear. It's amazing, but Mr. Ollivander remembers absolutely all the wands he sold. He is a real expert in his field, but Ollivander's knowledge is rather narrow. This is confirmed by the fact that he knows everything or almost everything about the most powerful wand in the world, but has not heard anything about the other Deathly Hallows.

There are four wand makers in America. One of them is a native of the Choctaw Indian tribe, Shikobo Wolf. He makes magic wands with a feather core of a bird that looks like a phoenix. His tools are very powerful, but not all magicians can handle them. They are preferred by specialists in transfiguration.

Another master is Johannes Jonker. The Wizard comes from a Muggle family. It produces wands with a core from the hair of the wild cat Wumpus. His magic wands are expensive and of high quality, with mother-of-pearl inlays.

The third master is called Chiago Kentana. It uses the translucent backbone of an Arkansas river monster in production. His wands are very stylish and powerful. True, after the death of Chyago, the production of magical items stopped, since only he could lure the river monsters.

Wand maker Violette Bouvet of New Orleans uses heartwood from swamp hawthorn wood and the hair of a rugaroo, a dog-headed monster that lives in the swamps of Louisiana. These magical items are more often chosen by dark magicians, but many ordinary members of the American magical community also own wands from Violette Bouvet.

The most famous magic wand

The most famous magic wand in the world of Harry Potter - Elderberry - one of the Deathly Hallows. According to legend, it was a gift from Death itself to one of the Peverell brothers. It could only be obtained by defeating the previous owner in battle. Often, new owners received a wand in very bloody and dirty ways: they killed in a dream, attacked an exhausted or sick opponent, and so on.

According to the book, Professor Dumbledore became the owner of the Elder Wand after defeating the evil wizard Grindelwald. But very interesting is its transition to the next owner. As it turned out later, in order to become the legal owner of this, it is not at all necessary to kill the opponent, it is enough to disarm him. Albus Dumbledore was disarmed by Malfoy in the sixth part of Harry Potter, but then no one imagined that the wand would pass to a new owner in this way.

The Elder Wand was later buried along with Albus Dumbledore. The Dark Lord defiled the grave of the great sorcerer and took the tool. Further, the circumstances were such that Draco Malfoy (the true owner of the wand) lost to Harry Potter in battle. The wand itself remained with Voldemort, while the boy who survived now became its owner. In the decisive duel between them, she disobeyed the Dark Lord's spell and went over to Harry, and the murderous spell ricocheted just in the direction of Tom Riddle.

DIY Harry Potter wand

To get a wand, fans of the Harry Potter universe do not have to try to find Diagon Alley or defeat any wizard in an unequal battle. You can make it yourself. Wizards made these magical tools only on the growing moon, at midnight. According to the ancient books of the magical universe, it was necessary to go around the tree three times, which gave wood to a stick, thanking him, praising his power and strength. Then you need to “give the tree” a scarlet ribbon, tying it, and next to pour red wine or water on the ground and bury bread or a precious stone.

Preparation of materials and tools

How to make a Harry Potter wand? First you need to prepare necessary tools and materials. Magicians make wands from wood, and the core can be a dragon's heartstring, hair from a unicorn's tail, a phoenix feather, or anything else that carries a magical component. Unfortunately, the complete technique for making these magical items is only available to wizards, so the core will have to be discarded unless you decide to make your own paper wand.

So, the material for manufacturing can be wood (you will need one branch of a suitable length and width, fairly even), Chinese chopsticks or a tightly twisted long roll of paper. You also need to prepare:

1. Glue gun with a rod.
2. Several brushes.
3. PVA glue (for paper crafts).
4. Acrylic paints "under the tree".
5. Small beads or buttons for decoration (optional)
6. Fixing emulsion for acrylic.

In addition, you need to take care of the cleanliness of the workplace.

Sanding and shaping

If you decide to make a wooden stick, choose a branch 28-36 centimeters long. The long one will be inconvenient to use, the short ones are more suitable for children. As for the width, it is optimal to choose a branch no thicker than your finger. Of course, you should look for a stick that is fairly even, without bends.

One end of the workpiece must be sanded so that it becomes rounded. You can even try to taper the branch so that it tapers a little towards the tip. It is better to start working with coarse-grained sandpaper, and to direct the finishing touches with fine-grained sandpaper. It is worth removing all growths and sharp notches from the branch, the bark can be left if desired.

Decorating and shaping the handle

Some wands (such as Hermione Granger's wand) have a handle, but this is optional. If you decide to form a handle, then make it approximately equal to the length of your finger. You can make this element with a glue gun. Apply the glue and let it dry, and then apply two to three more layers later. Additionally, you can cut out any patterns.

In addition, you can glue a bead or a small button to the base of the stick. Some sticks have such elements. So that the decoration is not too massive, pick it up the same width as the base of the stick. You can also apply a spiral pattern to the rest of the magic tool with a glue gun. Can be used instead of a glue gun polymer clay.

Coloring and fixing the result

It is better to paint the Harry Potter magic wand (you can see its photo in the article) with acrylic paint. Most of these magical items are made in shades of brown, but you can make a black or white wand. To give the color depth, it is worth applying several layers. You can, for example, use light and dark shades of brown plus black. If diluted acrylic paint water, the natural texture of the wood will be visible.

To achieve the effect of aging, you can fill in all the cracks and chips with a darker shade, and emphasize the protruding areas with a light one. For this jewelry work, a small brush with a hard bristle is well suited.

After the paint has dried well, you need to apply a fixing emulsion. It is not necessary to use a fixer, but it will keep the paint from coming off too quickly. You can choose a glossy or matte fixative depending on the desired effect.

Stick with a core

A stick with a core can be made using paper as a base. Start rolling a sheet of paper of a suitable size into a tight roll, stop as soon as you reach the middle of the sheet. At this point, you can invest the core. Wizards usually use a phoenix feather (any bird's feather can be used), dragon heartstring (red yarn), or unicorn hair (the silver hair of a New Year's garland).

Glowing magic wand

It's a bit more difficult to make a glowing Harry Potter wand. To do this, you need a small flashlight. You need to pull out the LED element and do not forget about the battery. Then the luminous element must be glued to the tip of the magic wand blank. To make it convenient to pass the wires through the workpiece, it is better to make it out of paper. Then it remains only to attach the switch to the handle of the magic tool.

Some caveats

Since a hot glue gun is used in the work and in the process it may be necessary to process the wood with a knife, it is impossible for the child to make the Harry Potter wand himself. Adult help is required.

Also, do not trust children to cut wooden blanks. If a child wants to make a stick completely with his own hands, it is better to choose the option with a paper base.

Such a Harry Potter magic wand, of course, will not perform spells, but it will be an excellent accessory for a brand new robe.

The incomprehensible, but such bewitching words that Harry Potter uttered in moments of danger and in witchcraft lessons are memorized by many schoolchildren. Joan Rowling's book has long become a desktop, and the young magician's magic wand has become a talisman.

The uniqueness of the Potter wand

When Harry first learned that he was to be trained in the school of great wizards, he was a little confused. All famous magicians, in addition to knowledge and experience, had a personal wand that suited their temperament. Thanks to the generosity and kindness of Hagrid - guide and mentor - the newcomer got his own tool for spells.

Harry's wand is made of holly, and in the core is the feather of a Phoenix rising from the ashes. This product is unique as it has a twin brother. A boy from a kind of good magicians becomes the owner of a powerful thing. But her abilities more than once protected the owner from mortal danger and rescued her from trouble.

What do you need to create Harry's artifact?

Recreating a rare relic that many sorcerers fought for possession is a truly exciting experience. You can make a similar stick together with your child, connecting him to the process of decorating and choosing the color design of the main materials. Of course, it is unlikely to be able to make exactly the same wand, since it is impossible to find the feathers of a resurrecting bird, but any master can bring a copy as close as possible to the original.

To do this, it is not necessary to look into Diagon Alley, you can get by with improvised means or inexpensive parts from the nearest hardware store. The design of the wand assumes the presence of:

• tree branches;
• brown paint;
• transparent varnish.

It will take only four tools to fit the stick to a specific size and give it symmetry - a ruler, a saw, sandpaper, a glue gun. Small beads of dark tones are suitable as decorative elements. It will give the product nobility and elegance.

If desired, LEDs can be placed in such a stick. Then the wooden base will need to be sawn and the backlight placed inside the workpiece. Install a switch invisibly on the surface.

Step-by-step algorithm for creating a stick

To make a magical inventory, you do not need to invent or invent anything. A series of master classes in video and printed versions, following which it is very easy to make a magic wand.

The most popular way is to manually process the branch. If its length is more than 11 centimeters, you should shorten the workpiece, and then grind the wood and bring the surface to optimal smoothness without roughness. Next, proceed to the formation of the relief at the end with a glue gun. The handle of the weapon that does the will of the magician should be slightly thickened with smooth bending lines. Small decorative fittings are subsequently mounted on it.

It is desirable to paint the product in brown or another dark color under imitation natural wood. After painting, fix the stick colorless varnish and let dry.

And other ready-made magical attributes - you can in our online store "site" at budget prices. Order high quality products from a trusted supplier!

Every day, the beloved character of the famous film Harry Potter wins the hearts of children and teenagers, immersing them in the world of ancient spells and learning magic. IN Lately Harry Potter's magic wand is becoming more and more popular, which you can make with your own hands at home, without even resorting to magic.

What is needed to create?

Then, when girls dream of a fairy costume, young sorcerers would be happy to take possession of a personal magic wand with which they can go to Hogwarts for training. And if the owl with a message has not yet arrived to you, you need to prepare for this event. Making a child's dreams come true and making a Harry Potter wand at home will not be difficult if you use the photo and video tips.

As a rule, the length of this magic item fluctuates around 25-30 cm. The thickness is selected individually, but usually it is also approximately equal to the diameter of a pencil, or a little thicker.

Necessary materials

• Glue gun filled with hot silicone glue
• Wood blanks
• sticks
• Beads, pebbles, beads
• Acrylic paints (brown, grey, black or others)

DIY Harry Potter Magic Wand: Step by Step Guide

1. Using a glue gun, apply hot silicone glue to the wooden blanks.
   
2. When processing blanks with glue in a circle, try not to burn your hands. If you wish, you can apply drawings on the stick in the form of spirals, zigzags, dots, stripes.
   
3. Attach beads to the end of the stick treated with glue.
   
4. When the glue has cooled to the point where it can be touched, start rotating the stick between your palms.
   
5. Even a slightly cooled glue remains sticky for a long time, so the beads will be well fixed on it.
   

   

6. After that, you should wait for the adhesive coating on the future Harry Potter, created by yourself, to dry completely.
   
7. Now you can start painting the product. For this purpose, it is best to choose paint in different shades of brown. Although gray, black and even red will do.
   
8. Try to paint the stick evenly, along the entire length. After the paint has dried, apply a colorless varnish to the product.
   
9. That's all. Now you know how to make a Harry Potter wand at home in a simple and easy way. a short time. You can experiment with beads and beads as far as your imagination allows.

DIY Harry Potter magic wand can be made in several ways: both from wood and from paper, as in this video.

Connoisseurs believe that such a magical item requires a special initiation process in order for you to exchange energy with it. Well, if you don’t believe in all this, but Harry Potter’s wand was created at home as an addition to children's costume for a holiday, it is enough just to put your love and faith in goodness into it. And who knows, maybe this device will become truly magical and bring success to your child. The main thing is to believe! Good luck!

Every young wizard dreams of getting his own wand and going to Hogwarts. Still think your owl just got lost somewhere along the way? Do not worry! You can get a nice wand anyway without going to Ollivander's. Of course, she won't be able to choose you properly, but she will be a great addition to a brand new robe!

Steps

Stick made from a wooden nail or branch

Buy a wooden nail about 25-30 cm long. You can find one at a craft supply store, where they usually come in packs of several. You can buy a longer nail and then cut off the excess with a hacksaw.

• You can also use a branch you found on the street. Choose one that is no thicker than your finger, about the length you want, and almost no kinks.

1. Sand one end of the stick so that it becomes rounded. This will be the tip of the stick. You can even give the wand a tapered shape so that it tapers a bit towards the tip like in the movies. Start with coarse grit sandpaper and finish polishing the stick with fine grit sandpaper.

   • If you are working with a branch, it is better to remove all sharp and jagged growths with sandpaper. You can leave the bark and knobby growths on the branch, but if desired, they can be cut or sanded.

2. If you want, you can use hot glue to form a handle. Usually this part of the stick is approximately the length of the finger. Cover the entire handle of your wand with hot glue. Let the glue harden, and then, if desired, apply 2-3 more layers of glue in the same way.

   • Not all sticks require a handle. For example, Hermione's wand does not have a handle.
   • Once the hot glue has hardened, you can cut patterns into it with the hot nozzle of the glue gun.

3. You can glue a bead or button to the base of your wand handle. Some sticks have a convex part at the end of the handle. You can make the same by gluing a convex bead or button to the base of the stick with hot glue. Find something about the same width as the base of your wand so it's not too big.

   • Don't worry if the color doesn't match, you can color your wand later.

4. If desired, using hot glue, you can apply a pattern to the rest of the stick. This material is ideal for making a spiral pattern on a wand, like Hermione Granger. This can be done by rotating the wand with the fingers of one hand, and applying the pattern with hot glue with the other hand. And if you don't have hot glue, you can wrap the handle with duct tape, or use polymer clay to make a good handle without a glue gun.

   Paint the workpiece in the main color with acrylic paint and leave to dry. Most wands are in shades of brown, but you can make a black wand or even a white wand. To add texture and depth to the color, paint the wand several shades of the same color. For example, you can paint the wand brown, using light and dark brown shades.

   • Try thinning the acrylic paint with water to show the wood texture in some places.

5. Try to achieve the effect of "aging". Mix a darker shade of base color paint and fill in all the cracks and chips on the stick with it. Then make a lighter shade of the main color paint and emphasize all the prominent parts on the stick with it. For this work, take a small, pointed brush.

   Let the paint dry, then apply a fixing emulsion to the paint layer to make it stick better. When outside, place your wand on a sheet of newspaper. Apply a colorless acrylic fixer to it and let dry. Then turn the stick over and fix the other side with a fixer. Let the fixative dry and repeat the procedure if necessary.

   • It is not necessary to apply a fixing emulsion to the stick, but it will prevent the paint from coming off too quickly. You can use a glossy or matte fixer.

   chopstick product

   Buy chopsticks. If you are making a chopstick for a child, a simple chopstick will do just fine. If you are making a chopstick for a teenager or adult, look for a bamboo cooking chopstick that is about 38cm long.

   • Don't worry if the color doesn't match, you can color the blank later.
   • Can't find chopsticks anywhere? Instead, you can take a long wooden art brush. Simply remove the lint part along with the metal nozzle. You can also break off this part or saw it off with a hacksaw.

6. Using hot glue, form the handle and stick. The handle should be about the length of your finger. Cover the part of the workpiece where the handle will be with hot glue, let it harden. If desired, you can add 2-3 more layers.

   Glue a bead or button to the base of the stick. Some sticks have a more intricate hilt base. If you want your wand to have one, try gluing a small bead or raised button to the base of the handle. The fittings should be the same width as the base of your stick, that is, do not go beyond the edges of the base too much.

   • Choose a bead or button according to your design and don't worry about the color, because it can be painted.
   • You can always leave a button or bead unpainted, especially if it looks like a crystal!

7. Most of the wands are done in shades of brown, but there were also white and black wands in the Harry Potter films. You can even paint your wand several shades of the same color to make it look more like wood.

   • If your chopsticks are made from bamboo, try thinning your acrylic paint with water. With this technique, you can show the texture of the wood, which will shine through the paint.

8. A little "age" your wand with darker and lighter shades of the base color. With a darker shade of base color paint, fill in all the cracks and chips on the stick. Using a cotton swab or a pointed brush, you can fill in such hard-to-reach places on a stick with paint. Then make a lighter shade of the main color paint and emphasize all the prominent parts on the stick with it.

9. Treat the stick with a clear emulsion to set the acrylic paint to make it last longer. Take the wand outside and place it on a sheet of newspaper. Apply acrylic paint fixer and let dry, then turn the stick over and work on the other side. Repeat these steps if necessary.

   • It is not necessary to apply a fixer, but this way the paint on the product will last longer.
   • You can choose between matte or glossy finish.

Paper magic wand

1. Roll up a sheet of paper into a small, thin, tight roll. Start at the bottom left corner of the sheet and roll it up towards the top right corner. Stop when you pass the widest part of the leaf.

   Apply some liquid glue to the remaining third of the sheet. To prevent the paper from getting too wet, apply glue with a brush in a thin layer. At this stage, you can hide the core in the stick. Here is what wizards usually use:

   • Phoenix Feather: Red, orange or yellow feather.
   • Dragon Heartstring: A piece of red yarn.
   • Unicorn Hair: Silvery or iridescent hair of tinsel.

2. Roll up the paper to the end and hold until the glue dries. This will take 20 to 30 minutes. If you find it inconvenient to hold the stick for so long, you can secure it with a thread. The glue must be completely dry before you move on to the next step.

   Cut off the ends straight. The ends of rolled paper tend to have sharp edges. Use scissors or a utility knife to cut off both sharp ends. Trim one end more than the other: this will make it wider, just enough to make a handle.

   Apply some hot glue to both ends of the stick. Thus, you additionally secure the roll, and it will not unfold. As a finishing touch, hot glue a small raised button or bead to the base of the stick with hot glue. Make sure that the width of the fittings matches the diameter of the base of your stick: the bead or button should not protrude too much from the edges of the base.

   Using hot glue, draw patterns on the stick. You can use hot glue to form the handle of the wand (usually the handle is as long as your finger). You can also use hot glue to draw curled patterns on the rest of the stick.

   • If desired, you can glue cute beads or buttons on the handle to decorate it with a raised pattern.

3. Fix the design of the stick with a primer. It is best to use a paint primer, gesso (gypsum primer), or even decoupage glue (such as Mod Podge brands). Let the primer dry before continuing. This will prevent the paper from getting too wet when you start painting it, otherwise it may tear.

   Paint the stick in the main color with acrylic paint. Most of the wands are done in shades of brown, but there were also white and black wands in the movies. You can paint the whole stick in one color, or you can use several shades of the same color. For example, you can paint a stick brown, adding strokes of light and dark brown to make it look more like wood.

4. A little "age" the wand and let the paint dry. In this way, you will emphasize the raised patterns on the stick. The darker shade of the paint you are using, apply cotton swab or with a pointed brush on all the cracks and hollows of the pattern on the stick. Then, with a lighter shade of paint, emphasize all the protruding edges on the stick.

   • If your sticks are black, you will need to emphasize only the protruding parts, if white, then you need to draw only the shadows.
   • A glue gun can overheat and burn, even one that works at low temperatures, so children should not be left unsupervised while working with it.

   What will you need

   For a stick made from a wooden nail or branch

   • Short, thin wooden nail
   • glue gun
   • glue stick
   • Acrylic paints

   For chopstick product

   • chopstick
   • glue gun
   • glue stick
   • Foam rubber or regular brushes
   • Acrylic paints
   • Small beads or raised buttons (optional)
   • Acrylic fixing emulsion can (recommended)

   For paper stick

   • Sheet paper or printer paper
   • PVA glue
   • glue gun
   • glue stick
   • Foam rubber or regular brushes
   • Acrylic paints
   • Small beads or raised buttons (optional)
   • Acrylic fixing emulsion can (recommended)

New Year's children's morning performances are costumed children's holidays, where every child has a desire to stand out in his own way. In suits, many moments play into the hands of the image: from the fabric from which it is made, to accessories. The fashion for wizards and Harry Potter has taken its toll, and now many children want to look just like that, we offer you step by step instructions, which will help you make such an important accessory as a magic wand with your own hands.

Master class number 1: how to make a Harry Potter magic wand

IN New Year's costumes Not a small role is played by such details as accessories. It is they who help to place the necessary accents in the image. In this tutorial, we will show you how to make a Harry Potter wand in a short amount of time.

materials

Before starting work, prepare:

• a wooden dowel or a long, even stick;
• hacksaw or saw;
• acrylic paints;
• brush;
• hot glue sticks;
• glue gun;
• sandpaper;
• varnish (can be replaced with clear nail polish);
• bead in the form of a large crystal.

Step 1. From a dowel or wooden stick, cut a piece of the length you need. In this case, the length of the stick was 30 cm. If you didn’t succeed in cutting the dowel carefully, process the edges with sandpaper. It is imperative to clean them so that the child does not get hurt.

Step 2. For the convenience of further work, put the blanks for the future magic wand in an empty jar with a sharp end. On the thicker end, start applying hot glue. Apply it carefully, layer by layer, allowing it to cool slightly, and then giving it a characteristic shape. A little closer to the thinner end of the stick, apply glue in stripes, giving the homemade product a characteristic vegetative relief.

At the top of the stick, make a straight cut straight across the glue. It will be needed to glue the bead.

Step 3. After the glue has completely dried, paint the stick with acrylic paints and, using different shades of brown, add depth to the texture.

Paint the previously prepared flat cut with black paint.

Step 4. After the paint has dried, cover the stick with varnish. It is best to use a spray nail polish or replace it with regular clear nail polish.

Step 5. Glue a bead in the form of a crystal on the base of the magic wand. Also put it on hot glue.

After the glue has dried, the Harry Potter wand is ready!

Master class number 2: do-it-yourself luminous magic wand

Magic wands have become especially popular with children after the film adaptation of J.K. Rowling's book. It's easy to make one for your child or with him. Materials for this will need the most simple. A little more work and money will have to be invested if you want the wand to become truly magical and glow in the dark. How to make a magic wand, we will tell in this master class.

materials

To create a magic wand that can glow in the dark, you will need:

• 2 - 3 thick sheets for drawing;
• PVA glue; clerical knife;
• hot glue sticks and gun;
• acrylic paints;
• wet wipes;
• a small flashlight with an LED bulb;
• wiring;
• blowtorch.

Step 1: Assemble the LED Light for the Wand

Well, if you managed to get a small flashlight with an LED bulb. In this case, you have less work to do.

Remove the bulb itself from the flashlight, remove everything superfluous from it (body, handles, etc.), leaving the switch.

Using a soldering iron, assemble part of the structure from the switch and long wires. Set it aside.

Step 2: preparing the base of the magic wand

For an ordinary magic wand, two sheets of thick drawing paper will suffice. They must be rolled into a cone. One sheet of paper may not be enough - the stick will be short. So twist the two cones and insert one into the other. Since there will be additional decoration on the stick, try to roll the cone as narrowly as possible. To prevent it from falling apart, secure the free ends of the cones with PVA glue.

After the cone is ready, run the wires through it so that the switch is in the handle of the cone.

Cut off the excess wires and solder the LED bulb contacts to them. As a result, it should clearly fit at the end of the stick. At the location of the switch, stationery knife cut a hole for the switch.

Carefully fill the cone itself with hot glue. Attach the light bulb to the outside of the end of the magic wand and the switch. Do this work yourself. Working with hot glue requires skill. Plus, they get burned easily. When filling the cone, work with the glue in stages, periodically letting it cool completely.

Working with glue on the outside, shape it after it cools down a bit. So the wand will look neater.

Step 3: Forming and Preparing to Paint

After the glue has dried, we also draw volumetric patterns on the outside of the stick.

As the glue dries, it is necessary to start preparing the surface. IN ideal you need to apply a white primer. If not, regular white acrylic paint will do.

Step 4: painting and aging

Paint the whole stick with a brush in Brown color. After the paint has dried, you can give the wand an authentic vintage look.

Take black acrylic paint, dilute it a little with water and use a brush to drive it into a stick.

Wipe the main convex parts of the stick with a damp cloth. As a result of such manipulations, black paint will remain in the irregularities on the surface, giving visual depth.

Cover convex patterns with golden paint and also remove some of the paint with a napkin. Leave the stick to dry completely.

The magic wand is ready!