Dreaming to spend beautiful wedding? Then our 4 master class on how to unusually paint a bottle of champagne for a wedding is just for you! An economical, hand-made decoration will not leave guests indifferent and will significantly reduce spending on trifles. But a beautiful bottle painted with safe acrylic paint is also pleasant to open and pour into glasses!

Do you want to know how to paint a bottle of champagne for a wedding so that guests exhale in admiration? Then hurry up and cook necessary tools and let's start!

Champagne bottles covered with gold paint

To make wonderful gilded bottles, we need the following tools:

• Newspaper / fabric that you don’t mind getting dirty;
• Decorative gold sequins (gold glitter) - you can buy ready-made ones, or you can work a little and cut them yourself;
• Aerosol gold paint;
• Empty bottles / bottles with alcohol;
• Glue - you can use both aerosol and liquid special for decoration;
• Paper towels;
• Gloves;
• Deep bowl.

Step 1

Let's start by cleaning the bottles from the labels - you can rub them with dishwashing detergent, soda or try warming it up with a hair dryer, from which the label should easily lag behind the bottle.

We paint the bottles with gold spray paint

Lay out newspapers or unnecessary fabric, arrange bottles. Put on gloves so you don't torment your hands after wiping them off the paint. We begin to paint the bottles with gold spray paint.

To prevent the paint from flowing and laying down evenly - spray it at some distance, not coming very close to the bottles.

Apply 2 coats and let dry. If you are painting for the first time, then you should read the technique in detail. .

Painted bottles in 2 layers

Step 2

1. Pour decorative glitter into a bowl.
2. Spray/spread the bottles with glue and sprinkle them well with glitter.
3. If you notice that you missed sections of the bottle - do not be afraid, add glue and sprinkle more.

to keep the napkin better, secure it with tape

STEP 3: how to coat only part of the bottle with glitter.

• To decorate part of the bottle, take a paper towel and wrap the bottle around it. a few centimeters above the bottom.
• Make sure the paper line is straight. Cover the rest of the bottle with glue and sprinkle with glitter, wait for them to dry and remove the napkin.

Thus, you can decorate a variety of bottles and complete your collection!

Also, based on this master class, you can experiment with color and texture. For example, champagne in red or covered with colored glitter looks gorgeous at a wedding.

Also, do not forget to decorate the glasses for the newlyweds in the same style. Even with glasses you can make chic candlesticks for table decor - click on the button!

Silver painting and texture creation

STEP 5

Take your time and you will succeed! You can apply the pattern to the entire bottle or to a part of it. To fix the result, it is ideal to cover with a matte or glossy varnish.

These are the stages our bottle went through before becoming a real beauty!

This decorated bottle will fit into any interior, adding romance and comfort.

This master class showed only a small part of the ways how you can decorate bottles for a wedding, making original bright accents on them.

Champagne Bottle Design Ideas

If you want to make your wedding more unique, or maybe add a little coziness to your home, we recommend that you look at more ideas for decorating and painting bottles. Unusual candlesticks, bride and groom attire, original pots and much more - and all this from ordinary glass bottles! You are sure to find the very option that fits perfectly into your life!

Packaging is an integral part of a gift. It is with her that the present looks complete. A sparkling drink is a symbol of the holiday, which is why people give it to each other so often. How to decorate a bottle of champagne with sweets, we will tell in this article.

Sharp decor

Just a few years ago, making candy bouquets became incredibly popular. It is not surprising that such flowers have become part of the decor and other products. For example, bottles. True, in this case, the flowers need to be made many times less, literally 3-7 pieces are enough. How to decorate a bottle We make sweets inside them and use a hot gun to fix this decor on the bottle. You can complement this decoration with spikes made of wrapping paper. We turn the cones and glue them to the base of the bottle. In order to somehow combine the composition of flowers and thorns, we make leaves from green translucent paper. We glue them in the gaps between the scattered decor. As an additional decoration, you can use spikelets of wheat or any dried flowers.

A pineapple

How to decorate a bottle of champagne with sweets? It is worth making a pineapple. It is done very simply. A bottle of champagne is wrapped with paper tape. You can not do this, but thanks to this step, the grip will increase. Now you need to glue candies in rows. It is advisable to use those sweets that have a gold or yellow wrapper. Candies must be round or square shape. Layer by layer, glue the sweets to the bottle on the hot gun. You need to stop when the sweets hit the neck. Now we need to make weed. The easiest way to make it is from thick tinted paper. Cut out strips and sharpen their edges. Using scissors, slightly twist the ends. Now glue the grass to the neck of the bottle with a glue gun. To bring the gift to the guests safe and sound, you need to wrap the bottle in transparent paper and tie it with a beautiful bow.

Gift for any occasion

How to decorate a bottle of champagne with sweets? You can combine two decor techniques. For example, decoupage a bottle of champagne with bright napkins, and make a wreath of sweets on top. Let's get started. Remove the label from champagne with alcohol. We degrease the bottle and glue the napkins with the help of PVA. If you have never done decoupage before, you can color the bottle in another way. We paint the workpiece with paints on glass and draw all kinds of patterns on it. The image of lace and snowflakes looks beautiful. Now you need to make a decor of sweets. From wrapping paper, we fold something like a plate. We fix it in this position with hot silicone. Now, in a chaotic manner, we fill the plate with sweets, beads, twigs and berries. Naturally, we glue everything. Using a hot gun, we fix the decoration on a pre-prepared bottle.

Christmas tree

How to decorate a bottle of champagne with tinsel and sweets? Make a Christmas tree out of an alcoholic drink. It's very simple. Lubricate the bottle with glue and wind green tinsel with a snake. We are waiting for the workpiece to dry. Glue colored balls and sweets to the tinsel. You can fasten them randomly, or you can create regular circles or other geometric shapes. The option looks beautiful when the tree is designed in one color or at least in one color scheme. As an additional decor, it is worth sticking ribbons, beads or bells. You can even put on such a Christmas tree a short garland that runs on batteries.

Champagne in a box

Such a gift can be presented to friends or parents at home. You can decorate a bottle of champagne with sweets with your own hands in just an hour. Requires a box colored paper, twigs, chocolate and other sweets. The basis of the composition will be a cardboard container. You can make it yourself or take any box that is available in the house and is suitable in size. We cover the cardboard with wrapping paper. We attach a bottle of champagne to the center of the box. Why attach it? So that during transportation the bottle does not move anywhere. We wrap each candy in shiny paper and attach it to the bottom of the box. Together with sweets, you can put a beautifully wrapped chocolate bar and a silver forest in the background of the composition. Trees are made from branches. They are painted white or silver and attached to the bottom of the box. Candies can be glued to improvised trees.

flower decoration

This decor method is very similar to the item about pineapple. The only difference is that here you can use sweets of any color and any shape. You can see a photo of a bottle of champagne decorated with sweets above. What does it take to repeat this idea? Wrap the bottle with paper tape. Starting from the bottom in rows, glue the candies. We stop at the neck of the bottle. Here you need to tie a beautiful bright bow, as well as attach artificial flower. It can be created from corrugated paper, and candy can be placed inside.

Bunch of grapes

How to decorate a bottle of champagne with sweets? You can step by step make a decor that repeats the shape of a branch of grapes in just two hours. This will require round candies and gold, green or purple foil. We unfold the sweets and make a new wrapper for them. When all the candies have acquired the same desired color, glue them to the bottle. We do this with a hot gun. First lay out the silhouette of the bunch, and then fill it with sweets. With the second and third layers, we give volume to the grape branch. From green paper you need to cut out the leaves and insert them between the berries. From colored wire, you can build tendrils characteristic of grapes. A voluminous bow should be tied at the base of the bunch.

bottle in a bucket

An original gift can be made from improvised materials. How beautiful to decorate a bottle of champagne with sweets? To do this, you need a plastic flower pot. You can immediately take the product of a nice color or give it the desired shade with the help of paint. When our bucket is ready, we insert a bottle inside it. Glue red sheets of tinted paper to the back of the pot. This wall will perform not only a decorative, but also a practical function, keeping sweets in a bucket. Wrap each candy in wrapping paper and put it in a bucket. A bucket of sweets must be filled with a slide.

bottle in boot

The gift that has unusual shape. For example, a bottle decorated to look like a boot. How to make such a present? To do this, from any dense material, plywood, chipboard or plastic, you need to cut out the shape of the sole from the boot. It should look like a bean. A bottle of champagne should be glued a little further than the heel. Now you should wrap the sparkling drink in a floristic net. She looks beautiful, and it will be easy to cling to the decor. And now let's start decorating. We glue the branches of the Christmas tree, moss or any other greenery to the top of the sole. We put sweets, balls, beads and berries on it. We decorate the floral grid with small candies or colored beads. You can attach colored balls, sweets or tie a decorative ribbon to the neck of the bottle.

New Year's decor

The easiest way to decorate a gift for the holiday is to attach cones and sweets to it. How to decorate a bottle of champagne with sweets? We attach Christmas tree branches around the sparkling drink. They can be artificial or real. Glue two or three cones and 4-5 sweets to the center. It is very easy to make bells out of sweets. It is enough to attach a small bead to the bottom of the candy. Christmas decorations can be an interesting addition to the decoration. Moreover, it can be not only balls, but also a figure of Santa Claus or the Snow Maiden. It remains to bind next to spruce branches large colored bow, and original gift he'll be ready.

There is a tradition of placing paired bottles of champagne on the newlyweds' table. They are not opened at the holiday, but left to be kept by the newlyweds until the couple achieves some success in family life. The bottle of the groom is printed on the first anniversary, and it symbolizes that patience, mutual understanding, the ability to overcome difficulties and routine reign in marriage.

The bottle of the bride is opened when the firstborn crosses the threshold of the house - in honor of the fact that the family has become larger. Therefore, they will stand on the table for the whole holiday and fall into every photo. To make them look beautiful and according to their status, they are decorated accordingly.

The easiest way to decorate champagne bottles is to wrap them with satin ribbons. This does not require special knowledge or skills - just the selected material, a little imagination and a few hours of free time.

Materials needed for decoration:

• several skeins of satin ribbon differing in color, 1–2 cm wide;
• glue on glass or moment-crystal;
• champagne;
• scissors.

At the preparatory stage, it is necessary to attach one end of the tape to the glass, at the level of the transition of the bottle body to the neck. After that, wrap the fabric around, attaching the second edge to the first. The ends should form a right angle, and the middle of the segment, which is behind, rises above them.

If these rules are followed, the tape lies tightly on the surface, then it is cut off and glued on.

Glue is applied to the segment over the entire surface and applied to the bottle, as in the preparatory stage. In this case, the right edge at the end lies on the left. The same is repeated 4 times with the main color ribbon, after which several turns are made with golden material.

Each next turn should partially overlap the previous one in order to get a beautiful weave.

When the decoration of the neck is completed, proceed to the main part of the bottle. To do this, you need to measure the diameter and, adding 1 cm, cut off the golden ribbon and several parts in the main color. It is also necessary to make a piece of tape in the main color, twice as long as the height of the main part of the bottle.

The longest segment is glued to the back - so that it runs along the bottle, leaving half to hang freely. The golden ribbon is smeared with glue, wrapped around the very bottom, connecting the edges at the back - so that there is glued matter under them.

The segment with the main color is glued in the same way as the golden one, but it is necessary that it overlaps the previous layer. Continue to repeat until you reach the decorated neck.

After that, the hanging end is smeared with glue, and the connection of the tapes is closed. The main decoration of the bottles for the wedding is ready, now you can add it with other decor.

It can be anything - paper, ribbons, polymer clay, etc.

Do-it-yourself polymer clay wedding champagne decorations - step by step instructions

To decorate bottles with decorative flowers, it is best to use polymer clay. Such buds can be created by yourself or bought. But if there is no skill, then it is better to use finished goods that will look even and beautiful. Necessary materials:

• bottle;
• a can of white paint;
• Scotch;
• mother-of-pearl halves of beads, 2–3 mm in diameter;
• glass outline;
• ready flowers;
• alcohol;
• cotton fabric;
• glue moment-crystal;
• scissors.

Before you start decorating, the bottle must be cleaned of the label, and wiped with a cloth soaked in alcohol. If this is not done, then the paint will lie unevenly or begin to peel off.

Squares of adhesive tape with a side of 1 cm and wavy lines that will depict plant stems are glued onto the bottle.

After the adhesive tape is glued, white paint is sprayed. After it dries, repeat the procedure 2-3 times to get a dense uniform coating.

When the staining is completed, the adhesive tape is removed and the glass is cleaned of adhesive residue.

Buds are glued onto a curved line using a moment crystal.

An image of plant sprouts is applied next to the contour.

After the contour has dried, the halves of the beads are glued in a chaotic manner. The bottle is ready, it can be supplemented with satin ribbons, matched to match the flowers.

Decor with rhinestones, bows

There are more simple ways wedding bottle decorations. To do this, use rhinestones or bows. You can often see how a magnificent satin bow is hung on the neck - light for the bride's bottle and dark for the groom. Types of decor with bows:

1. Tie the neck with a wide ribbon, on which a lush bow is glued to hide the label.
2. Tie the middle of the bottle, use both 1 voluminous bow and 3 small flat ones.
3. Connect two bottles together by the necks and hang a single bow on them. With this design, be sure to remove the labels. Often such garters look unusual, lace or bead threads can be used for them, and sometimes they are made in the same style as the bride's garters.
4. Connect the bottles in the middle with a wide piece of fabric, for this they are placed tightly against each other and tied with ribbon or lace. After that, they hang a large bow of a necessarily different color in order to stand out from the general background and attract attention.
5. Sticking small bows in a chaotic manner on the bottles.

There are a lot of ways to use bows to decorate wedding bottles, but with such decor you need to be moderate.

If used too a large number of bows, they will look ugly and sloppy. In this way, you can easily decorate glasses.

wedding bottles can be decorated with rhinestones. Bright shiny stones can either completely cover the surface or partially. The chosen design depends on the style of the wedding, the imagination of the newlyweds and how patient they are.

Methods for decorating bottles with rhinestones:

1. Full coverage of the surface with plain stones.
2. Full coverage of the bottle, but several colors are used, from which the pattern is laid out. It can be both abstract curls and symbolic patterns of newlyweds, birds, rings or hearts. The more complex the image, the smaller the diameter of the pebbles is chosen.
3. Drawing abstract patterns on the bottle, while the rest of the surface remains clean.
4. Image on the surface of symbolic drawings.
5. Gluing rhinestones in the form of Capitone (carriage tie).
6. Chaotic gluing of stones.

Before creating a decoration from rhinestones, it is necessary to clean the glass from the labels, and then wipe the surface with alcohol or acetone. This treatment guarantees maximum adhesion between decor and glass.

Often, bottles are designed in such a way that combines these two decorations.

Bright engraving design

Engraving on a bottle of champagne can be the most diverse, but it will have to be entrusted to a master who has been working with glass for a long time.

You won’t be able to create this on your own, because with the wrong pressure, the bottle will burst. This is quite hard work, especially if there is no specialized equipment. Engraving Benefits:

1. On the bottle, you can knock out any text that the newlyweds want.
2. A thematic drawing in the form of a pair of newlyweds or swans, hearts or rings is easily placed on the glass surface.
3. The drawing can be either white matte or glossy or with a special fill. Images made in golden or silver color look very beautiful on dark glass.
4. Engraving on glass looks noble and expensive.
5. Because of the neutrality colors and thoughtful design, engraved bottles will be appropriate at any wedding.
6. Decorations do not interfere with their storage in the necessary conditions, which allows you to keep the champagne longer, preventing it from turning into vinegar or weathering gases.
7. Unlike appliqués, which can fall off when the adhesive breaks down when cool, engraving does not change its design when stored.
8. Fabric decor can get dirty or wet and start to rot, which will bring negative emotions when opened. This does not happen with glass jewelry.
9. It is impossible to accidentally violate the integrity of the decor. In order to leave a scratch on the picture, you need to make a lot of effort, so this type of jewelry is the most durable.
10. If the bottles are dirty, they can be easily washed in cool water, which will not damage the decorative elements.

Engraving has many advantages over the usual methods of decorating bottles, especially if it is done by professionals according to an individual layout (standard templates can also be used).

But the more small details in the drawing and text, the more difficult such an order and the higher its payment. The price of carving for one bottle starts from 1500 rubles. And in the case of elite alcohol, it is much higher, because more expensive equipment. This must be taken into account if there is a desire to get unique images on champagne.

Here you will see how you can decorate champagne bottles for a wedding:

Wedding bottles are an important element of the wedding table, photos and future family life, so it is necessary to pay considerable attention to them. appearance, creating a unique design that the clothes, design and decor of the bottles were in the same stylistic direction. It is important that everything is not only beautiful, but also made with high quality, because if the time of the anniversary is known, then it is impossible to predict how long it will take before the appearance of the first child.

Beautiful and original decor wedding table very important at the wedding. Why is it so important to decorate the table with a pair of originally decorated bottles of champagne? As a rule, wedding bottles are decorated by the bride and groom with their own hands. And this champagne is not touched throughout the celebration.

• The first bottle is saved for the anniversary of the wedding.
• The second is opened when the firstborn is born.

There are many ways to decorate champagne. We will voice a few of them, the master class offered below will help us figure it out.

Whatever decor option you choose, first you need to remove the label from the bottles and prepare the surface.

To do this, put the bottles in a saucepan or basin, pour warm water and add dishwashing detergent there. We wait 30 minutes and then carefully remove the label. Wipe dry and degrease with acetone or alcohol.

The easiest option: light lace decoration. This work does not require a lot of money or effort. All you need is lace, beads, spray paint, glue, and a couple of satin ribbons.

An unusual option is to decorate the bottle with flower petals. Do-it-yourself artificial flowers are also suitable here.

The traditional decoration option is to wrap narrow ribbons around the bottle. Decor from ribbons can be supplemented with: beads, rhinestones, lace, flowers from polymer clay and atlas.

An original solution for those who love exotic and Chinese cuisine. Suitable for those who are good at sewing.

Touching and cute polymer clay roses are definitely suitable for. If making flowers from clay is a difficult task for you, these roses can be purchased at a needlework store.

This master class will help you decorate champagne bottles and glasses in the same style at no extra cost. You can take absolutely any color, to your taste. Of course, the bride and groom must be in solidarity in choosing wedding decorations.
For work you will need:

1. Champagne - 2 bottles.
2. White spray paint in a can - 1 piece.
3. Satin ribbons white and lilac - 2 meters each.
4. The adhesive tape is double-sided.
5. Beads.
6. Flowers from polymer clay.
7. Glass outline.
8. Glue stationery.
9. Clay Moment.

With warm water and a sponge, wash off the stickers from the bottles. Degrease the surface with alcohol or acetone. We are waiting for it to dry. Next, we stick paper squares, after painting, clean glass should remain in these places. You can decorate with butterflies or whatever.

We take a can of white paint (you can choose the color golden, silver), from a distance of 20-30 cm we paint the glass. We paint at least 3 times, after each time we wait for it to dry.

Carefully remove the squares of paper. If the glue is dry, scrape the glass with sandpaper. There are unpainted squares and stripes.

Glue the flowers on a clean glass with Moment glue.

We paint flowers and a bottle with a contour on glass.

Glue the beads onto the white paint. If the beads are large, split them with a knife and a hammer into two halves. Glue the halves too.

At the end of the work, we tie the bottle with satin ribbons, we start to weave from the neck. To keep our ribbon in place, just in case, fasten it with double-sided tape every 5 cm. We tie the ribbons with a knot and a bow.

So the decor of wedding champagne bottles is ready. This is what ribbon bows should look like.

The classic version of wedding decor requires more time and skill than the previous one. But, if you try, you will succeed. We will make champagne and the same ones.

For work you will need:

1. White inlay - 10.5 meters.
2. Black inlay - 8 meters.
3. Clay Moment (preferably a pencil).
4. Kapron bow - 3 meters.
5. Lace - 10 centimeters.
6. Rhinestones.

Champagne for a wedding can be decorated satin ribbon or colored inlay. These are all sold in craft stores.

Use an inlay, it stretches better than a tape, it will be more convenient for you to stick it on a bottle. Moment glue stick is best suited for these purposes.

We remove the labels, leaving the gold foil on the neck. Cut off a piece of lace and glue it.

Draw a vertical line across the bottle with a bar of soap. So it will be easier for us to work. Next, we begin to decorate with white trim. The first turn was glued, then grease the glass with glue, slightly touching the previous row.

You need to glue, slightly pulling the strip. After each turn, we cut the strip along our intended line. We've covered most of the champagne already.

We need to decorate the work further, make a skirt for the bride. We take a wide white ribbon, divide it into 3 parts and connect its edges. Use a lighter or soldering iron. We gather our 3 skirts and try them on a bottle of champagne. We tighten the thread.

Distribute evenly fluffy skirt. Glue the frills at a distance of 1.5-2 cm.

At the end, we will decorate the neck: glue rhinestones on a narrow golden ribbon

This decor is similar to the previous one. The only difference: we make the upper turns white color and the rest are black. Decorate with a butterfly made from a piece of black satin ribbon.

Glue rhinestones over the butterfly. Three rhinestones will imitate buttons. We glue a piece of a black bike - this will be a pocket with a white handkerchief.

Strictly speaking, only wine made in the French province of Champagne can be considered champagne. But in many other countries today they produce a drink that is given the same name. In any case, most people associate this wine with a holiday, which means that it should look solemn, so why not decorate it?

Materials and techniques

Many holidays are celebrated in a big way. The most delicious dishes are put on the table, and, of course, alcohol is not complete (if we are talking about a celebration for adults). As a rule, the hosts offer guests a choice of drinks, but among them a frequent guest is champagne. It is brought as a gift or bought in advance by the organizers of the event. In any case, a vessel with a drink requires special design.

For decoration, the following materials are usually used:

• tapes,
• braid,
• beads,
• corrugated paper,
• acrylic paints,
• patterned paper napkins,
• beads,
• lace, etc.

As auxiliary means, masters and craftswomen take colorless acrylic lacquer, transparent glue and PVA, small sparkles and confetti. As tools, fan brushes are useful, thin (linear or type) for drawing small details or for applying text, as well as flat ones to cover the surface with varnish.

Techniques with the help of which a real work of art is obtained from an ordinary bottle can be used in a variety of ways:

• decoupage;
• crackle - coating the pattern with a special composition that creates the effect of cracking over time;
• aging, or patting - application, and then partial erasure special paint;
• gilding and silvering;
• matting, drawing a picture using a stencil, etc.

All these methods are different in degree of complexity, and some of them should not be taken without experience.

Birthday

It is worth stocking up with acrylic paint and varnish, patterned napkins, lace, PVA glue and brushes with synthetic bristles:

1. First, the vessel must be soaked in plain water so that all labels can be easily removed. Wipe dry.
2. Cover it with paint 2 times to get an even layer without “bald spots”. Lacquer is applied on top.
3. After the varnish has completely dried, it is necessary to cut or tear out the desired pattern from the napkin. Lay it face down on the multifora.
4. Dampen the cloth by sprinkling water on it. This must be done carefully so as not to tear the thin material.
5. When the drawing is completely wet, it must be applied to the wall of the vessel, pressed and slowly removed the multifora.
6. Dilute PVA glue with water 1: 5 or even stronger, gently cover the drawing with it.
7. After the glue dries, they move on to the decor: wishes are written on the neck with paint with a thin brush, a braid or lace ribbon is glued along the edge of the transferred pattern.

Each next layer of decor is applied only after the previous one has dried. If there is a desire to glue rhinestones or beads, then this should be done at the very end of the whole work.

Wedding

Champagne is a drink, no doubt, festive. Therefore, it cannot be missed at an event such as a wedding. Of course, decorating all the bottles that were purchased for the celebration is long and expensive. But those that will be placed on the table near the bride and groom should be decorated.

Often they just get by with flowers, beads and bows, but sometimes they take two vessels at once and decorate them as figurines of newlyweds:

With the "groom" everything is much simpler: you can leave a bow tied under the cork or glue a piece of the same ribbon vertically under it and decorate it.

Often, glasses for newlyweds and candles that are lit at the celebration are decorated in the same style. Sometimes, photos of the bride and groom printed on self-adhesive paper, or their initials are used as decoration.

New Year

New Year is a holiday that everyone associates with something of their own. For some, this is fluffy snow, for others - unbridled fun, still others cannot imagine a fabulous night without the smell of tangerines, and the fourth definitely needs the sound of a sparkling drink opening and bubbles tickling their nose.

The bottle with thematic pictures drawn on it looks very nice. But this can only be done by those who have the talent of an artist and some experience in applying paint with a thin brush on curved surfaces. A simpler option is to decorate with braid and ribbons.

It is best to take 2 tapes different color: blue and silver, green and gold, etc.

Does the bottom look unfinished? You can simply dip it into the glue for about 1-2 cm, and then into small sparkles or confetti. You can also arrange a New Year's drink using the decoupage technique, transferring a pattern with paper napkin, or just wrap corrugated paper and decorate with beads, cones and small Christmas decorations.

Some people are so fascinated with decorating bottles that over time they begin to make them to order. Today good masters are very highly valued, and before the big holidays the demand for them is great.