There are a lot of things around us that seem familiar to us. But in fact, we have absolutely no idea what they are actually created for. And the purpose is simply incredible!

Blue part of the eraser

Almost everyone agrees that the blue part of the eraser is needed to remove ink. But this version is not entirely correct. This part was originally designed to remove markings on thick paper. The pink side of the eraser can leave marks on it, but the blue side wipes the paper clean.

When manufacturers realized that most people misunderstood the purpose of the different colored sides, they made the claim that the blue part of the eraser could wipe out ink. They went so far as to put an image of a feather on this side of the eraser.

Loop on the back of a shirt

It would seem that the purpose of this loop is obvious - to hang a shirt with it. But this is completely impractical. There are other explanations. Some people think that this loop came to us from the era of detachable collars and was intended to secure a tie.

The most romantic is the third version. According to it, an American student made a loop on the back of his shirt, on which was embroidered the date when he began dating his girlfriend. Thus, he wanted to show everyone the significance of this event. In turn, the girl began wearing a scarf with the emblem of the university where her lover studied.

Horizontal buttonhole on collar

Surely almost all people have noticed strange fact: While all the buttonholes on the shirt are vertical, one of them - on the collar - is horizontal. But why?

The fact is that vertical loops hold buttons worse, allowing them to unfasten quite easily. At the same time, the horizontally located hole holds them securely.

Tiny hole in an airplane window

Airplane window glass is made from two pieces of plexiglass. Due to the difference in internal and external pressure, a single window would easily crack. But a small hole allows air to circulate from the passenger compartment to the area between the windows, thereby equalizing the pressure between them.

Additional eyelets on sneakers

Few people have noticed that all models of sneakers have additional eyelets located in the upper part. In fact, they play an important function. With their help, you can securely fix your shoes on your feet. These eyelets also prevent chafing of your ankles during sports.

Cylindrical seal on laptop power cable

Probably everyone has seen this small insulated cylinder on the laptop power cable. If you look inside it, you can see a twisted coil around a metal liner.

It's actually very important thing called ferrite. With its help, high-frequency noise is suppressed in electronic circuits.

Hole at the end of a ballpoint pen cap

It is widely believed that this hole is intended to allow air to pass through in the event that the cap should inadvertently become lodged in the airway. But it is wrong.

In reality, if anything gets stuck in the trachea, it causes it to swell. The hole allows the cap not to press tightly against the body of the pen itself.

Small pocket inside the front jeans pocket

There are several popular options for its use: from storing contraceptives to conveniently placing a lighter there. But this is not what this pocket was originally invented for.

It first appeared on Levi's jeans back in 1873, and its main purpose was to store pocket watches.

Hole in Spaghetti Spoon

This hole is designed to make it convenient to measure the required portion of these pasta. It includes a standard portion of spaghetti per person.

Of course, people have different appetites, but the hole is designed for the average eater.

A piece of cloth sold with new clothes

These pieces of material are not intended to be used for patching holes in clothes if something happens. In fact, they act as a small sampler. The scraps can be washed using washing powder or bleach, while checking how new clothes will react to a particular detergent or cleaning agent.

Many people have noticed that men's shirts often there is a loop at the back. Sew it on the front side. Not all people know why the loop is needed in this particular place. There are several versions of answers on this topic, each of which has its own explanation.

Various versions

The simplest and most obvious version is that the loop at the back is needed to hang the product. For men's shirts, it is not customary to make a loop on the wrong side, as it can be uncomfortable to wear and chafe your neck. Therefore, the location was chosen on the front side under the yoke.

Important! It is impossible to say with complete confidence about the reason for the appearance of a loop on the back of a shirt. Some of the versions have historical background.

The next statement is that the loop on the shirt remains from ancient times, when starched detachable ties and collars were worn, and the loop was used as a fastener. At that time, ties were the main decoration of men's outfits. The loop helped to hold the collar or tie so that it did not slip and kept its shape. In those days, ties were more reminiscent of modern silk scarves and scarves.

The third option is shrouded in romance. They say that shirts with similar eyelets began to appear in American stores, and instantly gained popularity among local students. It was convenient when playing sports to hang the shirt in the locker room so that it would not wrinkle. A little later, loops entered student life as symbols of romantic relationships. Young people cut them off as a sign that their hearts are occupied and they have a lover. And the girls wore scarves in the colors of their chosen one’s educational institution.

Reference! The loop on the back of a men's shirt comes in handy when you need to change clothes, but there is nowhere or anything to hang it on.

How to use a buttonhole on a shirt

Modern people see only one purpose for the loop. You can neatly hang a shirt on it if you go to the gym, or another place where you need to change clothes. If the item is not folded, but hangs on a hook, it will not wrinkle and will not lose its original appearance.

June 28, 2016 13:30

By Fabiosa

Have you noticed that many shirts have a loop like this at the back? Have you ever wondered what it is for? In fact, there are several versions, and now we will tell you about them.

leangarments.com

Let's start with the cut. This loop usually tops what is called a bow pleat, which runs from the back yoke to the bottom of the shirt. The folds formed are one of the types of darts and are necessary for freedom of movement and at the same time for the fabric to fit along the natural lines of the body. So we can consider that this is a successful decorative detail with a useful cut element.

stylefellow.com

There is another, more romantic version of the origin of this loop. It’s hard to imagine now, but once upon a time, men’s shirts looked and were worn completely differently. In those days, shirts had removable collars that were starched so that they literally stood up and were worn tightly buttoned. Ties back then were more like scarves that had to be secured in some way, so this loop was probably made just for this purpose. But the manner of depicting people from the back came into fashion much later, so there is no sufficient evidence. But on modern shirts there is a button at the back, just so that the tie can fit into it. modern form I didn’t go anywhere.

arnoldzwicky.org

And the last option is from recent history. In the early 1960s, GANT began making shirts with this buttonhole, which became instantly popular among students from Ivy League universities. The direct purpose of the loop is to hang a shirt in a locker in a sports locker room so that it does not wrinkle.

staycrispymyfriends.blogspot.in

This version also has an indirect meaning - it is a designation of the status of personal relationships. If a young man who studied at Harvard, for example, was dating a girl, he would remove this loop as a sign that he was busy. And his chosen one, in turn, began to wear his college scarf. This is exclusively student symbolism, but nevertheless, a rather interesting fact.

Have you ever wondered why shirts need a loop at the back? There are several versions, and now we will tell you about them... Let's start with the cut. This loop usually crowns the so-called bow...

Have you ever wondered why shirts need a loop at the back?

There are several versions, and now we will tell you about them...

Let's start with the cut. This loop usually tops what is called a bow pleat, which runs from the back yoke to the bottom of the shirt. The folds formed are one of the types of darts and are necessary for freedom of movement and at the same time for the fabric to fit along the natural lines of the body. So we can consider that this is a successful decorative detail with a useful cut element.

There is one more romantic version the origin of this loop. It’s hard to imagine now, but once upon a time, men’s shirts looked and were worn completely differently. In those days, shirts had removable collars that were starched so that they literally stood up and were worn tightly buttoned. Ties back then were more like scarves that had to be secured in some way, so this loop was probably made just for this purpose. But the manner of depicting people from the back came into fashion much later, so there is no sufficient evidence. But on modern shirts there is a button at the back, just so that the tie in its modern form does not move anywhere.

AND last option from recent history. In the early 1960s, GANT began making shirts with this buttonhole, which became instantly popular among students from Ivy League universities. The direct purpose of the loop is to hang a shirt in a locker in a sports locker room so that it does not wrinkle.

This version also has an indirect meaning - it is a designation of the status of personal relationships. If a young man who studied at Harvard, for example, was dating a girl, he would remove this loop as a sign that he was busy. And his chosen one, in turn, began to wear his college scarf. This is exclusively student symbolism, but nevertheless, a rather interesting fact.

Many people have noticed that men's shirts often have a buttonhole at the back. Sew it on the front side. Not all people know why the loop is needed in this particular place. There are several versions of answers on this topic, each of which has its own explanation.

Various versions

The simplest and most obvious version is that the loop on the back is needed to hang the product. For men's shirts, it is not customary to make a loop on the wrong side, as it can be uncomfortable to wear and chafe your neck. Therefore, the location was chosen on the front side under the yoke.

Important! It is impossible to say with complete confidence about the reason for the appearance of a loop on the back of a shirt. Some of the versions have historical background.

The next statement is that the loop on the shirt remains from ancient times, when starched detachable ties and collars were worn, and the loop was used as a fastener. At that time, ties were the main decoration of men's outfits. The loop helped to hold the collar or tie so that it did not slip and kept its shape. In those days, ties were more reminiscent of modern silk scarves and scarves.

The third option is shrouded in romance. They say that shirts with similar eyelets began to appear in American stores, and instantly gained popularity among local students. It was convenient when playing sports to hang the shirt in the locker room so that it would not wrinkle. A little later, loops entered student life as symbols of romantic relationships. Young people cut them off as a sign that their hearts are occupied and they have a lover. And the girls wore scarves in the colors of their chosen one’s educational institution.

Reference! The loop on the back of a men's shirt comes in handy when you need to change clothes, but there is nowhere or anything to hang it on.

How to use a buttonhole on a shirt

Modern people see only one purpose for the loop. You can neatly hang a shirt on it if you go to the gym, or another place where you need to change clothes. If the item is not folded, but hangs on a hook, it will not wrinkle and will not lose its original appearance.