Every woman wants her loved one to always be neat and well-groomed. It is pleasant to look at a neat and clean man in a perfectly ironed shirt. But ironing men's shirts is a real challenge for many.

This must be done without fail with high quality, because the shirt is the face of a man and wrinkles are useless to her. Ironing a men's shirt is not difficult, you just need to know a certain sequence, principles and some rules that we will now share with you.

Before turning on the iron

You need to dry a clean washed shirt in a straightened form, hanging it on a trempel (hanger). It is not necessary to wait for complete drying; ironing a slightly damp product is much easier and faster. If the fabric is still dry, evenly moisten it with a home spray bottle about an hour before ironing. Alternatively, wrap the shirt for a few minutes with a damp towel.

However, this does not apply to silk shirts. They should be ironed exclusively dry through a damp cotton cloth. Sprinkling with water or ironing through cheesecloth may cause stains.

Do not rush to turn on the iron until you examine the label on the shirt. It contains the composition of the fabric, as well as recommendations from the manufacturer regarding the ironing process. It takes very little time, but saves you from the possibility of spoiling the thing.

A high-quality iron plus a good ironing board will make the process more pleasant and comfortable. Pour into the iron you need only distilled water, but not tap water. Otherwise, salt deposits may form in the tank and stains on things during ironing cannot be avoided. In addition, do not forget to clean the soleplate of the iron periodically.

Select the ironing mode according to the type of fabric

In order not to accidentally burn through the favorite shirt of your dear man, carefully set the mode on the iron that corresponds to a certain type of fabric. Memorize or hang in a conspicuous place a cheat sheet for matching materials to ironing modes:

• 100% cotton - 150 degrees, wet steam, strong iron pressure.
• Crinkled cotton - 110 degrees, no steam.
• Cotton + polyester - 110 degrees, a little steam.
• Linen - 210-230 degrees, a lot of wet steam, intense pressure.
• Cotton + linen - 180-200 degrees, abundant steam, strong pressure.
• Viscose - 120 degrees, no steam.

Step by step plan for ironing shirts

After washing the shirt, preparing everything you need and studying the label, you can finally start the great action in the following order:

• Collar.

You should always start with the gate. First, iron its wrong side, making movements with the iron from the corners to the middle. Then iron the front side in the same way. If you iron from the middle, then ugly folds will appear in the corners, which should not be there at all. So that the collar does not lose its natural right kind, do not smooth it by bending it on the rack.

Many mistakenly end up ironing a shirt with a collar. This is wrong, because by ironing the collar, you will wrinkle the sleeves and back again.

• Cuffs.

For long sleeves, start ironing from the cuffs. Do this in the same way as ironing the collar: from the inside, then from the front. Double cuffs should be ironed as follows: unscrew them completely, iron on both sides without folds, fold and iron again, evenly smoothing along the fold.

• Sleeves.

Some ironing boards come with a special board for ironing sleeves. But, even without one, the art of ironing a shirt can be comprehended.
Gently fold the sleeve in half so that the seam is in the middle. Iron each sleeve on both sides from the seam to the edge. Then lift and unfold it so that the edge is in the center, and iron again.

The arrows on the sleeves should not be smoothed out. This is considered bad form, but it is permissible only if there is absolutely no time for ironing, the shirt is urgently needed and the man will definitely not take off his jacket.

• Shelves.

Start with the shelf where the buttons are sewn on. In men's shirts, she is always on the right. Lay out the shirt on the narrow part of your ironing board and move the iron from top to bottom. Avoid buttons and do not fold pockets. Pay special attention to the gaps between the buttons: slightly stretching the fabric, pass the nose of the iron. Iron the second shelf, which is with loops, in the same way. It is even easier to do this, because there are no buttons on it.

• Back.

The back is ironed from right to left from the front or from the wrong side, depending on the material. Iron the right half of the back from the bottom up, the yoke, and then the left half. Finish ironing by moving the iron along the left seam from top to bottom.

The nuances of ironing

1. Ironing shirts made of viscose fibers should be especially careful, because they are very sensitive to high temperatures.
2. Woolen shirts should be ironed inside out and damp enough. Thus, it is even possible to restore the shirt to its previous dimensions if it has shrunk during washing.
3. We iron shirts with a sheen, embroidery or a relief pattern only from the wrong side, so that the ebb does not fade, and the embroidery or pattern looks more voluminous.
4. Dark shirts also need to be ironed inside out to avoid a shiny sheen.
5. Do not hold the iron for too long in the same place and do not press it very hard on the surface.
6. A special extension or a regular rolled towel tucked into the sleeve will help to greatly facilitate the process of ironing the sleeves.

How to quickly and effectively iron a shirt without an iron?

Sometimes in an emergency situation in the absence of an iron, such knowledge may come in handy. For example, on a trip or during a sudden power outage, when the husband urgently needs to run to a meeting. A loved one will certainly be pleasantly surprised if you masterfully smooth out the wrinkled folds on his shirt without the help of an iron.

• Method number 1. If the shirt is wrinkled in one place or all, but not very much, then it is best to do the following. Lay the wrinkled shirt on a flat surface and sprinkle it with water. Lightly pull the fabric in all directions to straighten it. Wait for it to dry.
• Method number 2. A heavily wrinkled shirt can be quickly smoothed out using this method. Hang your shirt on a trempel and take it to the bathroom. Close the door tightly, open the hot water faucet as much as possible. After some time, under the influence of steam and its own weight, the shirt will begin to straighten. Then put it on your beloved husband and walk over it with wet hands. That's all, the shirt is ironed, and the man is a little confused, but he is pleased and immensely grateful to you.

Every bachelor and every housewife must be able to properly iron men's shirts. Perhaps for a man it will not work out perfectly the first time, but experience will come with time.

Every woman wants her man to look stylish and neat. On a neatly dressed young man It's nice to look in an ironed shirt. But here another problem arises - not every girl, and even more so a man, knows how to properly iron this part of his wardrobe.

Fortunately, everyone can learn - just carefully read our article, where we will step by step tell you how to iron the product.

Read this article:

• Preparing the shirt for ironing
• Selecting the desired mode
• Shirt Ironing Guide
• Ironing a shirt without an iron
• How to fold and store men's shirts?

How to iron a men's shirt - the first steps

Before we tell you how to properly iron men's shirts, you should do some preparatory work. After washing, hang the shirt flat to dry on a hanger. Don't wait for it to dry, as slightly damp clothes are much easier to iron. If the fabric is still completely dry, it should be moistened with a spray bottle about 1.5 hours before ironing. Alternatively, you can wrap the product with moistened towels for a couple of minutes.

Attention: all this does not apply to silk products that are dry ironed using a damp cotton cloth. Using gauze or splashing with water will result in unsightly stains.

Do not turn on the iron until you read all the recommendations of the manufacturer indicated on the label - there you will find both the composition of the fabric and tips for washing, drying and ironing. It will take you just a couple of minutes, but it will minimize the risk of ruining your clothes. The ironing process will become even more comfortable if you use an ironing board and a high-quality iron without carbon deposits and scale. By the way, a little advice - you need to pour bottled water into the iron, which will protect against the formation of salt deposits, and hence stains on your clothes.

It is important!

Not sure how to choose an ironing board? We will help you buy a quality product that will perform its functions 100%.

Have you noticed traces of soot or scale on the iron? Here you will find all the recommendations for cleaning equipment using improvised means.

Step two - select the desired ironing mode

It's time to discuss in more detail how to properly iron a men's shirt. A lot, including the final result, depends on the type of fabric from which the shirt is made. Let's study in detail at what temperature and which mode is best to choose when working with certain tissues.

So, if the shirt is made of polyester, it is best to turn on a weak mode with a temperature of no more than + 120 degrees. The fabric should be slightly damp when ironing. Viscose products are ironed in the same way. Cottons should preferably be ironed on the 2-point setting at +150°C. Use the steam mode if necessary.

Linen products are best ironed at a maximum temperature of about + 200 ° C.

To remove all wrinkles, use steam and press hard on the iron. Shirts containing wool can be ironed at around +120°C. But this must be done exclusively from the inside, so as not to leave stains on the product.

It is better not to iron delicate silk shirts at all - with proper drying, you will not need this. But if there are still small “wrinkles” on the back or sleeves, set the weakest mode. If there is lace or embroidered elements on the product, you need to iron from the inside, using clean and dry gauze.

A few additional tips:

• dark shirts are ironed from the inside so that the iron does not leave behind an ugly shine;
• do not keep the hot sole on the material for too long, as well as press it to the clothes, so as not to leave unsightly marks.

How to iron a men's shirt - step by step instructions

So you washed and dried the shirt, read the manufacturer's recommendations on the label, which means it's time to start the main work - ironing the product. You need to act in order.

Collar

Ironing of men's shirts should begin with the collar. First we iron its wrong side, moving towards the middle from the edges, then we process the front part. If you iron from the center to the corners, then ugly "wrinkles" will appear there.

Tip: some housewives, on the contrary, finish the work with the collar, although this is wrong - no matter how carefully you work with the iron, wrinkles will still appear on the already ironed sleeves and back.

cuffs

If the shirt has long sleeves, iron from the cuffs. The work process is similar to ironing the collar - first we process the wrong side, then the front. If the cuffs are double, they must first be completely unscrewed, ironed without folds. Then fold the fabric back and go over the top again, smoothing the fold.

Sleeves

The easiest way to iron the sleeves is on a special small ironing board. But if you don’t have it, it’s okay - you can learn this “art”:

Smoothed arrows on the sleeves will look ugly. This is acceptable only if you have absolutely no time, and the man does not take off his jacket - in this case, no one will notice.

Shelves

You need to start ironing from the shelf on which the buttons are sewn - in men's products, such a shelf is located on the right side. Lay out the product on the narrow part of the board and carefully move from top to bottom, bypassing the buttons and not bending the pockets. Particular attention should be paid to the distance between the buttons - run the nose of the iron there, slightly stretching the material. The second part is ironed in the same way.

Did you know that according to statistics, the average person spends 350 days of their life ironing? We spend almost a whole year smoothing wrinkles and frills, steaming tablecloths and napkins. But, for sure, most of this time is spent on ironing shirts. "How to iron a shirt?" - this question can serve as a test to determine the skill of a real hostess.

Ironing a shirt correctly is an art. Let's share little tricks that will help turn a tedious process into an easy and labor-intensive task.

First, you need to prepare the workplace. It's just great if your iron is equipped with a steam generator, and your ironing board has a special device for ironing sleeves. This saves a lot of time. If you have an ordinary iron, you will have to arm yourself with sprays and a sprinkler.

How to iron a shirt

1. We prepare a shirt. It is easier to iron shirts when they are still damp. If the laundry is dry, be sure to moisten the material. You can use special sprays that contain starch. Then your shirt will keep an attractive look and freshness for a long time. If a spray is not available, plain water from a spray bottle will do. After dampening the shirt, put it in a bag for a while or wrap it in a clean towel so that the moisture is evenly distributed throughout the fabric.

• Little trick: rayon shirts should not be splashed with water, because drip marks will remain. It is better to wrap such a shirt for a few minutes in a damp terry towel.

2. Start the ironing process with small details: collar, cuffs, pockets, female models- frills, frills, lace.

• Little trick: Many people are accustomed to starting ironing shirts from the collar. But this is not entirely practical. By the end of the whole process, the collar is wrinkled again and has to be smoothed out additionally. The fabric on the collar is already the most subject to abrasion, and too much ironing will only reduce the life of the shirt.

So, first we smooth out the cuffs. It is better to do this from the wrong side to avoid the appearance of a lasa. On the front side, it is worth smoothing only those cuffs that need to be worn with cufflinks. In this case, turn the sleeve right side out, fold the cuffs and iron carefully, avoiding the appearance of transverse folds.

Then unfold the sleeve with the seam up and iron, gently steaming the armholes, the seam and the folds near the cuffs.

After that, fold the sleeve along the seam and smooth it on both sides. We do the same with the second sleeve.

Arrows on the sleeves: a stylish solution or bad manners?

To do or not to do arrows on the sleeves - there is no definite answer. Someone thinks that arrows are a manifestation of bad taste, others argue that a shirt with arrows on the sleeves keeps a neat look longer.

Some designers offer fashionable shirts with arrows for business people, but shirts in a sporty or casual style are best ironed without arrows.

The only thing that stylists agree on is the presence of arrows on the long sleeves of military uniform shirts.

Arrows are completely unacceptable if you are going to iron a women's shirt, unless it is a military uniform.

So, whether to display arrows on the sleeves or not is a matter of taste and habit.

3. We iron the yoke and shoulders. Lay the shirt on the ledge of the ironing board and gently iron the shoulder seams and the yoke of the shirt. It is unacceptable to iron the arrows on the shoulders.

4. We smooth the floors and the back. Unfold the shirt carefully and carefully iron the floors and back. Particular attention should be paid to pockets (if any) and the space between the buttons.

• little trick: If the shirt is light, then you can iron on the front side. Shirts dark and bright colors, shirts with embroidery and prints are ironed inside out only. This will help keep the saturation of colors longer.

5. Iron the collar. Lay the collar with the back side up and iron, slightly stretching the fabric, first the lapel of the collar, then the stand. Fold the collar along the seam and iron along the fold line. To avoid the appearance of shine, on the front side of the collar should be ironed, only lightly pressing the iron.

After you have finished ironing a men's or women's shirt, be sure to hang it on a coat hanger so that the product is completely dry and does not lose its shape. It is more convenient to store ironed shirts on a coat hanger in a spacious closet.

• Little trick: Having bought a new shirt, do not rush to throw away plastic racks. You will need them if you prefer to fold your shirts. Such racks better retain the shape of the collar.

A few tips on choosing a temperature regime

It is best to follow the instructions on the label that is on any product when choosing the temperature of the iron. Manufacturers always indicate what temperature is acceptable for ironing. Otherwise, please refer to the following guidelines:

100% cotton requires 150 degrees and wet steam;

For polyester shirts, the temperature is not higher than 110 degrees;

Linen fabric should be ironed damp, at an iron temperature of 210-230 degrees, with an abundance of steam and with strong pressure on the iron;

A viscose shirt will smooth out at 120 degrees. By the way, such a fabric does not have to be pre-wetted;

Silk fabric requires special care. Select the minimum temperature setting and iron through a thin cloth or gauze to avoid iron streaks.

Now you know how to iron a shirt correctly and quickly.

If someone in the family works for a company that has a business dress code, then the hostess is forced to regularly iron office-style clothes. And its main element is a well-ironed shirt. In this case, it will be useful to study the technology and features of ironing different types of shirts.

Exploring labels

The first thing to start with is to study the label on the product. If you do not familiarize yourself with this information, you can damage the fabric. After all, for each material there are certain temperature limits, which are not recommended to be exceeded. Iron icons are often printed on the labels, which indicate the acceptable temperature range for the product.

The decoding of these icons is simple: the more dots are drawn on a small iron, the higher the heating temperature can be set on the adjustment wheel of a real iron.

The interpretation of the icons on the labels tells you which ironing mode to choose for a particular garment.

Sometimes the label inside the clothes is uncomfortable to wear, so it is cut off.

If you got a product without a label, then it is better to set a low temperature first. Then add it little by little until the fabric begins to succumb to the iron. If the iron begins to slip poorly and stick to the material, you should slightly reduce the temperature regime.

Necessary accessories for ironing

To qualitatively iron clothes, it is important to prepare a workplace with the necessary devices. These include:

iron - for the standard method of ironing it is necessary;

ironing board - if it is not there, you can simply lay a thin blanket on the table, covering it with a thick cotton cloth;

undersleeve - a special device on which the sleeves are ironed if they want to avoid smoothing the arrows. It can be replaced with a homemade thick fabric roller;

sprayer with cool or room temperature water - to moisten the fabric. It is especially necessary if the iron does not have a steam and top spray function.

For convenience, you can use a sleeve and a spray bottle with water

How to iron a shirt without an iron

If you urgently need to iron a shirt, but there is no iron, you can use the old method of ironing: pour boiling water into an iron mug (or saucepan), clasp it on top with a towel so as not to burn yourself, and carefully iron such a device on clothes, straightening matter.

Sometimes you have to figure out a way to iron clothes if there is no iron in the house, and then even a pot of boiling water will do.

And steam from a boiled kettle will help smooth out small wrinkles: you just need to hold the shirt over it, and then dry it in a straightened form, hanging it on a coat hanger.

Steam from a boiled kettle will help heat the material of the shirt and smooth out fine wrinkles.

Some also use this method: water and vinegar are poured into a spray bottle (pulverizer) in equal proportions. Then lay the shirt on a flat surface (or hang it on a coat hanger) and apply the liquid in an even layer. After that, just dry the clothes.

Table: iron temperature conditions for different types of fabrics

Textile	Temperature (oC)	Steam	Pressing the iron	Peculiarities
Cotton	140-170	wet	strong	needs to be moisturized
Cotton with polyester	110	a small amount of	usual	iron gently: like polyester
Silk	60-80	do not use	usual	iron with a dry iron through a damp cloth (not gauze), do not moisten
Chiffon	60-80	No	lung	through a damp cloth, do not use a spray gun - stains may remain
Polyester	60-80	No	lung	low ironing temperature, the fiber melts
Viscose	120	Little	usual	do not moisturize so that stains do not remain; iron slightly damp, inside out or through the fabric
"Crinkled" cotton	110	No	usual	depends on the composition of the tissue
Wool	110-120	steaming	lung	through a damp cotton cloth, steam the embossed parts
Linen	180-200	lot	strong	iron inside out, use a spray bottle
Cotton with linen	180	lot	strong	like cotton, linen
Knitwear	minimal or medium, depending on fiber composition	steam upright	light, no pressure	in the direction of the loops, from the wrong side

Ironing instructions for shirts with different sleeve lengths

First, consider the difference in ironing different models shirts, namely: with long and short sleeves.

Long-sleeve shirts require more time and attention to iron.

It is necessary to start ironing long sleeves by smoothing the longitudinal seam

First, small and paired parts are ironed. To smooth the sleeves of such a shirt, you need to fold them in half, placing the line of the longitudinal seam in the center. After the fold lines are ironed. If the arrows on the sleeves are not needed, then ironing should be done along the middle part of the sleeve, without touching its outer edge.

Shirt ironing algorithm long sleeve

Video: how to iron a long sleeve shirt

Short-sleeved shirts are easier to iron as they don't have complicated cuffed sleeves.

Short-sleeved shirts are quick and easy to iron

In general, such a shirt is ironed in the same way as a long-sleeved shirt. But if usually on long sleeves arrows from the outside are almost always done, then on some shirts with short sleeves they try not to leave them. Arrows do not do it only in one case: if the material is too soft, and the sleeves are narrow and almost fit the arm.

Video: how to quickly iron a short-sleeved shirt

Detailed description of the process of ironing a men's shirt

So, let's consider the sequence of actions.

Step 1 - Collar:

Start ironing the collar from the inside - move the iron from the edges of the collar to the center to prevent wrinkles from forming at the corners.
Collar ironed first

Flip the collar right side up and iron gently in the same way.

Iron the stand.

If the collar does not iron well, you can use the steam function of the iron or lightly dampen the cloth. If creases have formed on the collar, then they must be smoothed from top to bottom. You can not bend the collar along the stand and iron it along the fold - this leads to rapid abrasion of the material.

Step 2 - Sleeves and Cuffs:

1. Start ironing the cuffs from the wrong side - iron them from the corners to the center so that there are no wrinkles.
2. Iron the cuffs on the other side without touching the buttons (plastic can melt from contact with a hot iron). It is convenient to iron them unfolded on a board or put on a sleeve.
   Don't touch the buttons when ironing the cuffs.
3. Fold the sleeve, placing the line of the longitudinal seam in the center. Iron it, pulling it slightly, without bringing the iron to the brim. It is recommended to iron the bottom of the sleeve, retreating from the cuffs a few centimeters.
   Before ironing the sleeve, the longitudinal seam must be positioned in the center in order to thoroughly steam it.
4. If you want to make "arrows" on the sleeve, then fold it so that the seam is on the edge, and smooth the sides well.
   Usually shirts with long sleeves are made with pleats, as this allows them to hold their shape longer when worn.
5. Next, you need to iron the central part again, gently reaching the cuff with the nose of the iron. But don't touch the buttons. Pull the sleeve slightly when ironing to avoid ironed creases.
6. If there are still small folds, put the sleeves in turn on the undersleeve with the cuff forward and iron them.
   If the material of the shirt is too difficult to iron near the cuff, then it is better to use a special device - an undersleeve

Step 3 - Yoke and Shoulders:

Slip the shirt over the narrow edge of the board with one shoulder. start ironing upper part shelves, then go to the yoke. Guide the iron along the collar. Then put the shirt on the other shoulder and iron it with the same movements.
In order for the upper part of the shirt to iron well, the material needs to be leveled and stretched a little.

Iron all connecting seams.

When ironing the yoke and shoulders, keep the iron parallel to the collar

Step 4 - back and shelves:

1. Position the button front (the front of the shirt) along the board and iron all over.
2. With the tip of the iron, gently work the areas between the buttons on the front side of the shirt, without touching them.
   Between the buttons, iron carefully, slightly pulling the material with your hand
3. Iron the seam at the collar and gradually lower, moving the iron with the back side forward.
   When ironing shelves with buttons, it is important to ensure that the hot iron does not touch them.
4. Then slide the shirt over the board and iron the side seam. The side seam of the shirt must be ironed from top to bottom, starting from the sleeve.
5. Iron the back, paying special attention to the seam of the connection with the yoke. When ironing the back, you need to once again pass the iron along the seam where it connects to the yoke
6. If there are decorative folds or gathers in the upper part of the back, they should be ironed especially carefully.
   Sometimes you need to iron decorative folds on the back from the front and back sides of the shirt: when the material is too thick and difficult to iron
7. At the end, iron the left shelf - first, go over the bar with the fastener holes with the iron. Then, if there is a pocket, iron it from the bottom up. After that, iron the rest of the shelf.
   On a shelf without buttons, special attention is paid to ironing the pocket, if there is one on the shirt.

Step 5 - correct errors:

1. Examine the shirt carefully. It often happens that the central sections are poorly ironed. Or some places wrinkle a little while ironing other parts of the clothes.
2. Correct the errors by ironing the problem areas again.

You can only iron a clean shirt, because under the influence of high temperature, even a subtle smell of sweat can increase many times over. But it is even worse if, after smoothing down, on the matter appear yellow spots. They will no longer be able to be removed.

You can only iron a clean shirt

To make it easier to iron a dry shirt, you can lightly spray it with a spray bottle in advance or hang the shirt for a short time on a coat hanger in a bathroom filled with steam from hot water.

To prevent the shirt collar from wrinkling even in the closet, cut out a cardboard rectangle and fix it under the collar.

What is the difference between ironing male and female models

Women's blouse shirts are often decorated with decorative elements: embroidery, appliqué, sewn on beads or buttons, metal overlays etc.

Often the collar on a women's shirt-blouse is decorated different types patches and patches

Therefore, it is necessary to iron such products more delicately:

Start ironing from the collar. If it has soft stripes made of fabric, braid or lace, then gently iron them with the tip of the iron through gauze or thin cotton fabric. If there are hard linings, then they should be bypassed without touching the hot base.
Any smooth embroidery on a shirt should be ironed carefully, choosing the appropriate heating mode for the iron.

If the material of the patches is too delicate all over the blouse (or, for example, embroideries are made with shiny threads), then the sleeves and back of such clothes should be ironed from the inside out.
Embroidered sleeves are best ironed from the wrong side so that the colored threads do not fade or stick to a hot iron

Next, iron the seam at the collar and gradually lower, moving the iron with the back side forward. Iron the shoulders of the blouse and the yoke, if any.
The shoulders and yoke of a women's blouse are ironed in the same way as a men's shirt.

Start ironing the shelves with small details, carefully ironing the darts and pockets, and then iron the larger parts.
Darts and pockets on women's shirts should be well ironed so that the material does not bulge in the most visible place.

At the end, the back of the shirt is ironed - if there are tucks at the bottom of the back, then they need to be ironed separately, smoothing the ends of the tucks with the nose of the iron. And then iron the top of the garment to the collar.
It is necessary to iron the tucks on the back of the women's blouse with a slight stretch of the material, smoothing their ends with the nose of the iron