Crochet booties-sandals are summer shoes for babies who still cannot walk and are in a stroller during a walk. In such "shoes" the child will feel comfortable, as well as look beautiful and very elegant. You can knit booties-sandals with your own hands, this will require basic crochet skills and a little time.

We knit simple and warm crochet booties-sandals: a few tips

We choose the hook number depending on the thickness of the threads, they should be approximately the same. In this case, knitting will be as convenient as possible, and the canvas will turn out to be even and beautiful.

All additional accessories, for the safety of the baby, must be firmly and securely sewn on, especially when it comes to small items that can be swallowed.

This model is good because it is quite easy to knit, it will take quite a bit of time, so it is suitable for beginner knitters. In addition, according to the above master class, you can knit booties for both girls and boys, you just need to choose the appropriate color.

To knit it, you will need the following materials:

• children's cotton yarn (about 50g);
• hook of suitable size;
• knitting markers.

Sole knitting pattern:

Progress:

1. We start with the sole, you will need to immediately knit 4 identical blanks, that is, you will need two for each bootie. We collect a chain of 14 air loops, then we knit according to the above pattern. We focus on the size of the child's legs, if necessary, add rows by analogy.
2. We apply two soles to each other so that all the edges coincide, fasten with a safety pin. We tie in a circle with semi-columns, we get the pins.
3. The upper part of the booties will consist of straps and lacing. With the help of markers on the sole, we mark the points where the straps will be located: two pairs in front and a pair on the heel.
4. From the marked points, we begin to knit all the straps in straight and reverse rows as follows: we hook the hook into the loop of the base, we knit one air loop for lifting, 2 single crochets, 1 air loop for lifting, we knit 4 rows like this, then we perform 3 air loops for lifting , 2 double crochets, cut the thread.
5. Laces: we collect a chain of 200 air loops, we knit them with connecting posts. We steam the finished laces with an iron.
6. We thread the laces into the straps (between the top two columns) so that the ties are on the back side.

If the sandals are intended for a boy, then it is enough to knit them according to this description in the appropriate color. Booties for girls can be additionally decorated, for example, by tying flowers and sewing to the straps.

Trying to crochet cute booties-sandals for a baby

This model of knitted sandals was created especially for little beautiful and tender girls. Despite the simplicity of their execution, they are very beautiful and elegant.

To knit these booties-sandals, you will need the following materials:

• children's cotton yarn in two colors;
• hook of suitable size;
• two buttons;
• needle, scissors.

Sole knitting pattern used:

Work description:

1. We start knitting from the sole. We collect a chain of 8 air loops, then we knit the sole according to the scheme given above. We knit 2 blanks from yarn of one color and two from yarn of the second color. We focus on the size of the child's legs, if necessary, add rows by analogy.
2. We take two soles different colors, apply to each other, tie in a circle with a half-column, connecting them to each other.
3. We find the central loop on the toe, count 8 loops from it in both directions, leave this part open. We knit the rest of the rows in straight and reverse rows with single crochets (6 rows in total). Cut the thread, hide the tip.
4. We tie the edges of the sides with a thread of a different color, we make a loop of 10 air loops in the upper part.
5. Sew on buttons.

The booties are ready!

A selection of videos on the topic of the article

To date, needlewomen have come up with a huge variety of crocheted models of children's sandals - from the simplest to the very complex. Having understood the principle of knitting such shoes for kids, you can create unique models with your own hands. For inspiration, we have selected a few videos from interesting master classes on knitting such shoes for kids.

Moms really want to pamper their little princesses, buy beautiful toys and dress them up in dresses. A little fashionista should have everything in an adult way, this even applies to shoes. Add variety to ordinary shoes, tie your beauty crochet baby sandals. Of course, you can’t walk in them on the street, unless you sew them to the sole, but for home or for riding in a stroller, they are quite suitable.

For work you will need:

• 50 g white yarn, 20 g red yarn. Yarn Gazzal Baby cotton (100% cotton, 50 g - 225 m);
• hook number 3;
• 2 buttons;
• beads;
• needle;
• a thread.

Legend:

• VP - air loop;
• CCH - double crochet;
• RLS - single crochet;
• SP - connecting loop.

Description of the process of knitting children's sandals crochet:

In finished form, using the above yarn, the sole should be 12.5 cm long and 6 cm wide. This size is suitable for a girl of 12 months. To calculate the sole of a different size, you need to measure the length and width of the foot, in this case the required length is 12 cm and the width is 6 cm. Dial a chain of VP with a length equal to the difference between these two numbers (difference 12 cm-6 cm = 6 cm). The chain turned out from 16 loops. For a shorter or longer sole, the knitting pattern of the toe and heel remains the same, only the number of intermediate loops changes. The red yarn piping adds a little to the length. The upper is knitted in the same way regardless of the size and is suitable for sole lengths from 10 to 14 cm.

Knitting soles

We start knitting sandals from the sole according to the scheme. The scheme is quite simple and quickly knits, first we use white yarn.

We collect 16 VP and 1 VP for lifting. In the first row we knit 7 sc, 7 dc, 7 dc in last loop. Turn knitting and reverse side we knit 7 dc, 7 sc and 4 sc in one loop. We close the row 1 joint venture.

In total, you need to connect 4 such details.

Knitting the top

When the soles are ready, we continue to knit the top of the sandals with white yarn.

For the right sandal from the center of the heel, count 8 + 5 loops to the right, fasten the thread, make 3 ch for lifting and dial 4 dc towards the center of the heel. Then cast on 16 ch, skip 16 sts on the sole and knit 5 dc and 20 ch on the left side of the sandal.

On the second row, work 1 ch and knit the entire row of sc to the end.

In the third row, dial 3 VP for lifting and knit the row almost to the end of the dc. Before reaching the end of row 4 loops, make 1 VP and skip 1 loop for the hole for the button.

Finish row 3 dc. Tie the entire edge of the sc with red yarn.

For the left sandal, we act in a similar way, only we make a report of 8 + 5 loops to the left.

We collect 3 VP, we knit 4 CCH, 16 VP and 16 loops we skip on the sole. Then 5 CCH and 20 VP for the fastener.

We also knit the second and third rows, we tie them with red yarn.

For knitting the front of the sandals, we will use the pattern, it is the same for both sandals.

On the front central part of the sole, leave 9 loops, count another 10 loops to the right side and start knitting. To do this, we fix the thread and perform 3 VPs for lifting, then we knit 9 CCHs towards the center, we knit 7 VPs and skip 9 loops on the sole. We continue to knit further according to the scheme to the end of the row.

In the second row, we collect 1 VP and we knit the entire row to the end of the RLS.

In the third row, we begin to remove the loops, for this we knit 3 VP, 1 CCH and 4 paired CCHs, thereby removing the loops. In the central part we knit 3 sc in one loop, then 1 sc and again 3 sc in one loop. We complete the row with ten CCHs connected in pairs.

The fourth row consists of 1 VP and 12 RLS. In the fifth row, reduce the number of loops to three. To do this, we knit 3 VPs for lifting and 3 CCHs in one loop, then we combine 5 more CCHs in the central part and combine 4 CCHs on the left side. We finish knitting 1 joint venture, gathering together the beginning and end of the row.

We tie the sandals with red yarn RLS. Knitting finished.

It remains only to sew on the buttons and decorate the sandals with beads.

If desired, they can be embroidered with beads on the front, can be connected with a jumper, as in the photo.

Our sandals are ready!

We hope that following the diagram and description, you have obtained the same wonderful sandals for a little princess.

Share with us your result and leave comments.

Knitwear is becoming more and more popular every day. Mothers and grandmothers especially knit for their babies. knitted clothes it looks unusual, the light plays on it very beautifully, and the very texture of such a thing is very pleasant to the touch.

Crochet baby booties-sandals

The product can be light and airy, or dense and warm - it all depends on what function the connected thing will perform.

Such cute little things as crocheted booties and sandals are gaining special love and popularity today. Connected with love and girls, with various decorations, cars, flowers, different form and color scheme- all this can be realized by any needlewoman for her beloved child!

Necessary preparatory actions

So, a little later we will consider crocheting sandals according to the pattern with a description. In the meantime, you need to make measurements and small calculations. Measure the length of your foot from heel to toe. It is most convenient to do this by placing the baby's foot on a piece of paper and circling the foot. For newborn babies and toddlers up to 3 months, the standard bootie length is about 10 cm. You don’t need to take less, because booties are rarely worn on a bare leg, and the baby will be uncomfortable in a tight product.

The next step is to decide on the height of the product. Crocheted sandals and booties look a little different. Sandals usually cover the heel and reach the protruding bone, and booties also capture part of the lower leg. Booties are more like low ankle boots.

Crochet sandals: a diagram with a description. Knitting foot

The standard start is a set of air loops (circles in the center).

The columns in the diagram are double crochets. Not all columns are drawn, but this does not interfere with perception. For a bootie with a foot length of 10 cm, you need to dial 10 air loops. Three more loops are cast on instead of the first column, and the first row is knitted with a double crochet. In the first loop you need to knit 2 columns. Next, we knit one column into each loop, 5 columns into the last loop of the row, then again one column into each loop, and two more columns into the same loop where the first two columns were tied. Thus, we knitted one row, which resembles an oval in shape. The second row is knitted similarly, increases are added according to the scheme.

In order for crocheting sandals according to the pattern with the description to be successful, and the product not to puff, it is better to look not only at the pattern, but also at the product during the knitting process. With a sandal foot length of 10 centimeters, it is enough to knit three rows of double crochets. Depending on the thickness of the yarn, the product may turn out a little less or a little more. In the sample - standard children's yarn for hand knitting brand Baby. For larger booties, you need to decide on the length by looking at the outlined foot of the baby. The booties should protrude from all sides beyond the borders of the circled foot by no more than 0.5 cm. An unlimited number of rows can be knitted, however, for large sizes it is better to combine double crochets, simple columns and semi-columns to create an ergonomic sole.

Side part knitting

Crocheting the side of a bootie or sandal is a continuation of knitting the foot, and the number of stitches is the same as in the last row of the foot, but when grabbing the thread, the hook should be inserted not for the upper loops of the stitches, but for their "body". Thus, perpendicular rows are obtained and the sandal "rises up".

Starting from the second row, we make 2 decreases in each row on the heel. For open sandals, it is better to do 1 decrease in each row.

The product turns out to be open, and you can leave it in this form, but add a jumper so that the sandal does not fly off the leg.

You can crochet a jumper to decorate such a bootie-sandal, or make a slightly more closed nose and decorate it with flowers, cars, volumetric patterns. The jumper can be connected with simple columns, or you can choose openwork pattern, then no more decorations are needed.

Another option is flowers, as in the example. They can be knitted according to the following description: we collect 50 air loops, of which we knit three columns with a crochet into each loop of the entire first row. The second row is a column with two or three crochets, which can be alternated for more volume.

You can also add green petals or a few roses, and the booty will take on a finished look.

The remaining threads can be cut or with their help to fix the leaves.

With more voluminous roses, the use of booties can be inconvenient, and smaller ones look ugly.

An interesting option is crocheting closed sandals according to the pattern with a description that is attached to the photographs.

As you can see, everything is quite simple, and the scope for imagination is not limited!

Finally, the long-awaited summer has come, the days are so happy! The sun warms with its bright rays, the wind blows with pleasant warmth, which means that it's time to shoot all winter clothes, and dress the beauty that everyone will see.

I propose to crochet booties sandals, which will certainly attract the attention of everyone, because they are very unusual and stylish! Adults wear sandals and slates in the summer, so why is it worse for kids and babies who sit in their own and enjoy the world around them?

So, we knit for children, so you should choose cotton yarn, then the legs of the kids will breathe even in the most. You need to work with crochet No. 2.5.
Leg size 10.5 cm.

Crochet booties sandals for a girl - a step-by-step lesson with a diagram and a photo:

1. The foot can be knitted according to any pattern, but this one is optimal for this model of sandals, it is most convenient to fasten it at the end and looks neater.

2. We collect 20 VP, 3 of them are lifting for the next row.

3. In the 4th loop we knit 3 CCH at once.

5. In the last VP, we knit 7 dc for a turn and again we knit dc, one in each loop of the row, except for the last one.

6. In the last loop following the scheme - 3 more CCH and SP complete the row.

7. Then, according to the scheme, we knit the 2nd row and the third, carefully considering all the additions, after which we get the foot.

8. Such details need to be connected 4 pieces, for brightness and creativity, you can take 2 colors. By changing the color, you can make an addition to the outfit of absolutely any color.

10. It is important to consider that before ironing, you must definitely experiment on a sample, otherwise it may turn out that the part does not iron out, which is what we need, but rather deforms or changes color.

11. We take one of the details of the foot and thread the hook under the CCH, which is located in the last row through one CCH from the last increase on the heel.

12. We knit 4 lifting VPs, which replace 1 SS2H.

13. then we knit 6 more CC2H - the first wall is ready.

14. Then 12 VPs, they should just be enough until the fifth of the seven reversal CCHs of the first row and we knit CC2H there.

16. Next, you need to knit a chain of 21 VPs (the number of loops is equal to the distance that is needed for the strap (I have 16 loops), plus 5 loops per buttonhole). I knit a loop in the 5th VP and continue the row of CCH.

17. The 11th loop from the VP, the loop where the jumper is for the finger and 1 loop from the next 12 VP, we knit with one CCH.

18. One bootie of a sandal for a girl is almost ready!

19. For the second sandal, we do the same, but in a mirror way, that is, we start not from the wall, but from the strap. We knit 21 VP, then clinging under the SSN, we knit the wall, then 12 VP, a jumper for the finger, 11 VP, the second wall, then the second row, according to the first sandal.

20. Here are both upper parts of crocheted sandal booties ready.

21. All protruding threads must be pulled out to the wrong side so that they do not spoil appearance our beauty.

22. Align the second part of the foot with the first.

23. Connect two feet with a chain stitch, crocheting both, hook the thread and pull it out, and so on from loop to loop.

24. So, our wonderful booties sandals for girls are ready, all that remains is to decorate them and sew buttons on the strap and you can safely go outside with your baby! The only drawback of these most beautiful sandals is that they are not comfortable to wear for children who already walk on their own, but they look incomparable on the legs of those who still cannot stand!

How good long winter evenings, sitting comfortably on an armchair in front of the TV, to realize all your handmade desires. A young mother, a resident of Georgia, Lina Lima, tells in photographs how she knitted booties - crochet sandals for your boy

If your baby does not walk yet, and he needs sandals solely to complete the outfit, then I recommend knitting crochet these are light summer sandals.

I confess that the baby's bare legs strain me, and most of the shoes are designed for kids who are already taking their first steps. And in my opinion, these shoes are too heavy and hot. And light knitted for the baby will be just the way.

So, we need threads of two colors and a hook matched to the size of the yarn.

And also here is a knitting pattern crochet children's soles sandals found on the Internet. Symbols generally accepted

1. We collect a chain of 16 loops

2. We make one c. lifting, seven tbsp. b. n. and seven st. double crochet

3. In the last loop we place 7 tbsp. double crochet

5. To lift, you need to knit 3 in. n. and make 15 double crochets

6. Then we knit 2 tbsp in each loop five times. from n.

7. In the opposite direction, we knit 16 tbsp. from n.

8. In the loop we make 3 tbsp. from n., in the next 4 tbsp. from n. and again 3 tbsp. from n.

9. Final row crochet sandals knit like this: 3 in. p. and 15 double crochets

10. We do 2 tbsp. from n. and 1 tbsp. from n. and again the same thing. Then in each of the loops we knit 3 tbsp. s.n. and again 1 tbsp. from n. 2 tbsp. from n. and repeat this moment

11. We knit 16 tbsp. from n. and to complete the heel we knit the same semicircle as on the toe of the sole

12. Begin to tie crochet green thread sole. I do it from the edge where the back will be fixed later sandals

13. We tie to the end

14. We start with three lifting loops, and then we do 5 tbsp. from n.

15. We knit a chain from the 16th century. P.

16. We add 5 tbsp. from n.

17. We knit fasteners for the strap of the 20th century. P.

18. We begin to tie the strap with single crochets

19. Then comes a row of double crochets. Here we make two holes for the buttons. To do this, skip one loop, and above it we make 1 c. n. and continue the double crochets

20. Finishing the Back booties sandals next to single crochets

21. We tie the whole part with green thread

22. We collect a chain of 20 loops

23. We knit three rows of double crochets, this top part knitted sandals

24. Sew on this part. We tie it with a green thread

25. We knit the sole of the second shoe in the same way. But the back part needs to be slightly changed so that it turns out in a mirror image. To do this, first we knit 20 loops (this will be a strap fastener) we attach with five tbsp. from n.

26. Making the 16th century n. and again 5 tbsp. from n.

28. Sew on the buttons and sandals for the baby are ready. I didn’t have buttons on hand, and I used star-shaped beads that matched the color. I was going to change them to buttons later, but they did their job very well. And I left them. Now we wear these miracle sandals

These sandals are the perfect complement. crocheted or .