For beginner needlewomen, knitting a baby hat can be a little difficult at first, but with a little practice and you can easily create many different patterns using just a few basic types of loops.

Steps

Single crochet hat

Attach the working thread to the hook. Make a slip knot on the crochet hook using one end of the yarn.

• The free end of the yarn is cut off only at the end of the knitting of the product, it indicates to you where the beginning of knitting is and is more often called the "tail". The beginning of knitting always starts from the end of the thread. The part of the yarn coming from the ball is called the "working thread" and, as the name suggests, it is with this part of the yarn that you will create the hat.

1. Make 2 chain stitches. From the eyelet on the hook, knit 2 air loops.

   Form a ring. Work 6 single crochets into the second loop from the hook. Then close the row with a connecting post by inserting the hook into the base of the first post. You will have the first row.

   • Please note that the second loop from the hook is the very first chain loop.

2. Work single crochet into each stitch of the previous row. In order to form the second row of the future hat, knit 2 single crochet stitches (st.b / n) in each of the 6 loops of the previous row, then connect the first and last stitches with a connecting post.

   • When you finish the row, you will have 12 tbsp. b / n.
   • Mark the last column with a clasp marker or a piece of yarn in a contrasting color so you can clearly see the beginning and end of the row.

3. Knit art. b / n in the third row. Make 1 stitch and knit 1 tbsp. b / n in the first loop of the previous row, and then 2 tbsp. b / n in the second. Continue alternating between 1 and 2 tbsp. b / n to the end of the row. Thus, you will knit 1 tbsp. b / n in each odd and 2 tbsp. b / n in each even loop.

   • At the end of the row, you get 18 tbsp. b / n.
   • Move the marker to the last st. b / n of this row and connect the row with a connecting post.

4. Continue adding in the fourth row. Make one chain stitch. In the fourth row, you need to knit one st. b / n in the first and second loops and 2 tbsp. b / n in the third loop of the previous row. Repeat knitting to the end of the row, then close the row again with a connecting post.

   • In the fourth row, you should have 24 stitches.
   • Transfer the marker to the last column of this row before continuing to knit.

5. Continue adding stitches in row 5. You must have noticed that in each row the distance between the increments increases by 1 loop, so in the fifth row the increase will be made in every fourth loop of the row. Do not forget to close the row again with the connecting post.

   • In the fifth row, you get 30 tbsp. b / n.
   • Mark the end of the fifth row with a marker.

6. Continue adding stitches for 4 more rows. In rows 6-9, increase the distance between the increments by 1 tbsp. b / n.

   • Row 6: One by one Art. b / n in the first 4 loops, then 2 tbsp. b / n in the fifth. Repeat to the end of the row.
   • Row 7: 5 tbsp. b / n in the first 5 loops, then 2 tbsp. b / n in the fifth. Repeat to the end of the row.
   • Row 8: Increase in every 7th loop of the previous row.
   • Row 9: Increase in every 8 stitches. At the end of this row, you will have 54 stitches.
   • Do not forget to mark the last column of the row with a marker and close the rows with a connecting post. Each new row starts with 1 chain stitch.

7. Work 1 more row. Now you no longer need to make increases, just knit 1 tbsp. b / n in each loop of the previous row.

   • Each of the following rows should have 54 loops.
   • Move the marker.
   • Thus, you need to knit rows 10-26.

8. Knit a connecting post. Finish knitting by closing the row with a connecting post. Your hat is ready.

   Secure the work. Cut the working thread, leaving a tail 5-6 cm. Pull the tail through the eyelet of the connecting post and tighten the knot properly.

   • Hide the remaining ponytail in the loops of the beanie.

   Beanie with double crochet

   1. Hook the yarn.

   2. Make a chain of 4 stitches. Work 4 stitches from the eyelet on the crochet

      Form a ring. Connect the first and last loops of the chain with a connecting post.

      Work the double crochet into the center of the ring. Before you start knitting the hat itself, as well as each new row, you first need to make 2 lifting air loops. Then, in the center of the ring, knit 13 double crochets (st s / n) and complete the row by connecting the last crochet with the second air lift loop, using a connecting post (c.c), so the first row will be completed. The same procedure will be repeated at the end of each row.

      • Note that 2 lifts in this row do not count as a column.

   3. Double the number of single crochets. In the second row, you need to knit 2 sts / n in each column of the previous row, so you will make 1 increase in each of the 13 columns of the previous row. Complete a row of s.s.

      • At the end of the second row, you will have 26 stitches.
      • In some cases, while knitting in a circle, the work turns over, but to knit this hat model, you do not need to turn the work over, just continue knitting in the same direction.

   4. Alternate single and double s / n sts. As usual, start knitting a new row with 2 air lift stitches. In the third and subsequent rows, the number of increases will decrease. Knit 1 st s / n in the first stitch of the previous row and 2 st s / n in the second. Continue to knit the row in the same way, making an increase in every second buttonhole of the previous row.

      • At the end of the work, you will have 39 loops.
      • In the third row, you will need to make increases in every second loop, in the fourth - in every third, in the fifth - in every fourth, etc.

   5. Continue to increase the number of stitches in the fourth row. Knit two sts s / n in every 3 loop of the previous row.

      • On the fourth row, you should have 52 stitches.
      • Connect the first and last posts with s.c.

   6. Work rows 5 through 13 in the same way. Subsequent rows are knitted similarly to rows 2-5, with the only difference that you no longer need to make increases. Always start knitting a row with 2 air lift loops and end with c.s. Knit 1 st s / n in each of the loops of the previous row.

      • In each of the rows from 5 to 13 there should be 52 st s / n.

   7. Now turn the work over. Make 2 lifting loops again and twist knitting. Next, knit a row similarly to the previous ones, knitting 1 st s / n in each of the columns of the previous row. Complete a row of s.s.

      • Rows 15 and 16 are knitted in the same way, but you no longer need to turn the work.
      • In each of the rows from 14 to 16, there should still be 52 sts / n.

   8. Tie the last decorative row of the beanie. Make 1 lifting loop, and then knit 1 single crochet (st b / n) in each loop of the previous row.

      • Don't skip loops.
      • Similarly, connect the beginning and end of the row with s.c.
      • You can knit any other edging for your hat, on the Internet you can find many options for simple, and at the same time, beautiful edging.

   9. Secure the end. Cut the working thread, leaving a tail 5-6 cm. Pull this tail through the loop on the hook and tighten the loop properly by pulling the tail.

      • In order to further secure the work, thread the tail of the thread into the knitting needle and hide it between the already knitted posts.
      • Fold the last 3 rows up. Your hat is ready.

   Cap

   1. Hook the thread. Make a slip knot at the end of the crochet hook using the free end of the yarn.

      • The free end of the yarn, or ponytail, is not used in knitting. To knit a hat, you will use the thread coming from the ball, this is called the "working thread".

   2. Work 2 stitches. From the loop on your crochet hook, knit 2 chain stitches.

      Work the double crochet into the second loop from the hook. Having connected two air loops, knit 9 half-columns with a crochet (half-s / n) in the second loop from the hook. At the end of the row, connect the first and last half-columns using a connecting post (s.c)

   3. Double the number of stitches. In the second row, you will need to knit 2 half stitches. s / n in each loop of the previous row. Thus, you will make 1 increase in each loop. To do this: make 2 air lifting loops, then knit 1 half. s / n in the same loop, 2 half-st. s / n to the next one and continue to knit for 2 half. s / n in each loop of the previous row. When finished, connect the first and last posts of the row using a connecting post (s.c).

      • You should have 20 stitches in this row.

   4. In the third row, increase every other loop. Knit 2 lifting chain stitches again, and then knit 1 half-st. s / n in the same loop. In the next loop, knit 1 half. s / n and 2 half-st. s / n to the next. Repeat to the end of the row. At the end, close the circle with s.s.

      • In the third row, you will need to make increases in every second loop, in the fourth - in every third, in the fifth - in every fourth, etc. Do not forget to knit 2 lifting air loops at the beginning of each row and close the circle with d.s.
      • You should have 30 stitches in this row.

   5. Continue adding stitches in the fourth row. Make 2 lifting loops again and knit 1 half-st. s / n in the same loop. In the next 2 loops, knit 1 half. s / n. Continue knitting to the end of the row.

      • You will have 40 stitches in this row.

   6. Reduce the number of loops. Knit 2 lifting loops again, and then, without knitting half-stitches. s / n in the first lifting loop, knit 1 half. s / n in each of the next 37 loops of the previous row.

      • Thus, you get 38 loops.

Many, many all kinds of hats are sold today in stores for children. But I prefer to knit for my kids myself, although I am not an ace in this matter. While on maternity leave, I tried to crochet a hat for my princess and it turns out that there is nothing complicated in its execution, the main thing is to follow the scheme and description.

And what else pleases me that such a hat cannot be found anywhere else, it is individual in its way and your baby will look great. In addition, no one else connects with tenderness and love, like mom. Arm yourself with everything you need and we will do needlework.

Necessary materials:

• YarnArt Jeans yarn in different colors
• hook number 3
• holofiber

Crochet hat for a newborn girl - description for beginners:

We start our knitting with an amigurumi ring, into which we knit twelve single crochet stitches.

We close the ring with a connecting loop.


Next, we continue knitting according to the proposed scheme below, while changing the color of the thread in each row. You can take any colors of a thread at your discretion. The hat is good at knitting because you don't have to buy a lot of multi-colored skeins. It is enough to get the remnants of the yarn that have survived from the previous knitting.


As a result of the additions according to the scheme, we get such a rainbow circle.


Then we continue knitting with ordinary columns with one crochet in each loop of the previous row, while also changing the color of the yarn in each next row. We need to knit such rows in the amount of eight pieces.
We knit the last three rows with single crochet columns with milky yarn. We get such a ready-made hat.


The hat for the newborn girl is ready, it remains to decorate it with a beautiful flower.

Crochet flower for a hat:

To create it, we knit six b / n stitches into the amigurumi ring.

Next, we make an increase in each loop - we get 12 st-kov b / n.


Then we knit three air. loops, we skip one loop of the bottom row, in the next we knit a single crochet. Thus, we knit in a circle and we get arches.


In the next row we knit two air. loops, then five sts with a crochet in the arch, again two air. loops and st-k b / n in the arch. So we continue in a circle to the end of the row. We do not cut the thread.


One flower is ready.


Now we start knitting the second flower. We knit st-k b / n at the beginning of the arch of the lower row, we knit two air. loops and again st-k b / n at the base of the lower arch. We knit to the end of the row.

We start the next row with two air. loops, in the arch we knit four sts with one yarn, two air. loops, st-k b / n in the arch.


Having knitted all the arches in this way, we get the second flower.


We knit the last upper flower according to the same principle as the second, only we will knit three double crochets into the arch instead of four.


Our flower is ready, now we will knit the middle for it. We knit 6 st.b / n into the amigurumi ring, in the second row we add six times (12 stitches), knit two rows of 12 st.b / n, then decrease 6 times (6 stitches).


After that, fill the ball lightly with holofiber and sew it to our flower.

We attach the flower to the cap.

A crocheted hat for a girl is ready. Wear it with pleasure.

Crochet provides endless possibilities. A crochet can be used to knit a warm and dense hat for a child, as well as a light summer one, which allows air to pass through well and saves the child's head from overheating.

Crochet hat for newborns is easy

Head circumference: 36-38 cm.
Materials: acrylic yarn, hook number 2.

"Lush" column: make 3-5 yarns, then insert the hook into the main loop and knit all the formed loops together.

Work description:

Cast on a chain of 91 air loops, connect into a ring with a double crochet.

1st row: 2 air loops for lifting, 91 stitches with 1 crochet, at the end of the row, a connecting half-stitch.

2nd row: 2 air. lifting loops, 11 columns with 1 crochet, "fluffy" column, * 12 columns with a crochet, "fluffy" column *, repeat from "*" to "*" 6 times, at the end of the row a connecting half-column.

From the third row to the tenth row, knit like the second row.

11th row: start making decreases as follows: in front of the "magnificent" column and after it, knit two tbsp. with a crochet together.

12-15 rows knit as 11th until there are 5 double crochets between the "lush" columns.

16-17 rows: make one decrease between the "lush" columns. There should be 3 double crochets between them.

Further the bottom of the cap is tied single crochet, for this, 2 loops are knitted together. The last remaining 3-5 loops need to be knit all together and the thread pulled off.

For girls: the bottom of the hat can be decorated with knitted flowers, and you can also tie the hat with 3 double crochets from one loop through 2 air loops.

To the hat you can knit "ears"... To do this, retreat 9 columns from the middle of the back of the cap on both sides and dial 18 loops along the edge of the cap. "Ears" are knitted with single crochet columns. In every second row, you need to make decreases on both sides, knitting two columns together until there are only 3 loops left. Sew to the "ears" along a 30 cm long cord twisted of yarn.

Materials: cotton yarn, hook number 1.5.

Fan Pattern: knit 3 columns in one place and attach the last column to the base with a connecting column.

Work description:

Dial chain of 112 loops.

1st row: 2 air sts for lifting, 112 double crochets;

2nd row: 2 c. st for lifting, 1 double crochet, * 1 air st, 1 double crochet through 1 air st of the previous row *, repeat from "*" to "*" to the end of the row, end the row with 2 double crochets;

3rd row: 2 c. item for lifting, 1 tbsp. with a crochet, * 1 air loop, 1 tbsp. with a crochet in a column with a crochet previous. row *, repeat from "*" to "*" to the end of the row, end the row with 2 double crochets;

4th row: 2 c. item for lifting, 1 tbsp. with a crochet, * 1 air p., 1 double crochet in st. with a crochet before. rows *, repeat from "*" to "*" 7 times, 1 air st., 1 double crochet in st. the previous row, 1 tbsp. with a crochet in the air item of the previous row, 1 tbsp. with a crochet in a column of the previous row, (* 1 air st., 1 st. with a crochet in st. of the previous row *, repeat from "*" to "*" 6 times, 1 air st., 1 double crochet in st. of the previous row, 1 double crochet in the air st. of the previous row, 1 double crochet in the previous row), repeat between (...) 3 times, * 1 air st., 1 double crochet in st. the previous row *, repeat from "*" to "*" to the end of the row, end the row with 2 double crochets;

5th row: 2 c. item for lifting, 1 tbsp. with a crochet, * 1 air loop, 1 tbsp. with a crochet in a column of the previous row *, repeat from "*" to "*" 6 times, 1 air st., 7 double crochets, (* 1 air st., 1 double crochet in the st. of the previous row *, repeat from "*" To "*" 4 times, 1 stitch, 7 double crochets), repeat between (...) 3 times, * 1 air st, 1 double crochet in st. the previous row *, repeat from "*" to "*" to the end of the row, end the row with 2 st. with a crochet;

6th row: 2 c. item for lifting, 1 tbsp. with a crochet, * 1 air p., 1 tbsp. with a crochet in the previous row *, repeat from "*" to "*" 5 times, 1 air st., 5 double crochets, 1 air st., 5 double crochets, * 1 air st., 1 double crochet , 1 air st., 1 double crochet, 1 air st., 5 double crochets, 1 air st., 5 double crochets *, repeat from "*" to "*" 3 times, * 1 air loop, 1 double crochet in st. prev. row *, repeat from "*" to "*" to the end of the row, at the end of 2 st. with a crochet;

7th row: knit like the fifth;

8th row: knit like the fourth;

9th row and all subsequent rows knit as 2nd row, until the length of the fabric reaches 10 cm. Then knit a row with single crochet. Divide the canvas into three parts: the side parts are 37 columns each, the middle part 38 columns. Then knit the middle part with single crochets, at the end of each row, knit 2 penultimate columns of the middle part together, the last column of the middle part and the first column of the side part also together. Knit like this until the sides of the cap are closed, 8-10 single crochets should remain on the middle part.

Beanie bottom we tie it as follows: half of the openwork fabric with single crochets, then with double crochets until the middle of the next openwork, and again with single crochets. The front part of the cap can be tied with a fan pattern.

When a small miracle appears in the house, mothers, grandmothers and aunts want to give the child only the best. The most beautiful things are handmade. Knitted hats will be an excellent gift option for a baby, because the fashion for such things does not go away over the years. Skillful needlewomen knit whole masterpieces according to the proposed patterns, decorating products with embroidery or patterns. Today we will look at how knitted hats for newborn boys are created.

Before proceeding with the direct knitting of the hat, you need to calculate the required number of loops. To do this, you can knit a small sample and calculate the knitting density on it. Lightly wash the sample in warm water and let it dry. Count how many loops there were for 1 connected centimeter. Next, measure the volume of the baby's head and multiply the resulting figure by the knitting density. If you want the hat to fit snugly around the child's head, cast on 5 loops less than the amount received. But keep in mind that the baby's hat should fit perfectly on the head. If it turns out to be small, it will constantly expose the ears of the child, and the large hat strives to get off the eyes.

When choosing a knitting pattern, be guided by the season when the hat will be worn. For summer, crocheted fishnet, lightweight and breathable, are perfect. Tighter knitting will be a better option for winter. To make the winter version of the hat warm and hold tightly on the head, give preference to products with ties and knitted in several threads. It is also worth considering the materials used. For the winter version, it is better to take a hypoallergenic yarn with the addition of wool.

The main rule that is worth knowing is that the hat should match the appearance of the baby and emphasize his beauty and uniqueness. We offer you 2 options for a knitted hat for a newborn boy, knitting and crocheting.

We knit a cap for the baby with knitting needles

Materials for work:

• baby yarn (50% wool, 50% acrylic) - 2 skeins of different colors;
• circular needles - 4 mm;
• hook;
• stocking needles.

Process description:

Crochet baby hat

Necessary materials:

• Ceam Hawai blue yarn 100% cotton;
• hook number 2.

The knitting density is 24 stitches for every 10 cm.

In the course of work, you need to use the following types of loops:

• air loop;
• single crochet;
• column and 1 yarn;
• column and 2 yarns.

Process description:

The bonnet as a type of clothing first appeared in the Middle Ages in Europe. It was a headdress worn by both women and men exclusively at night. Later, it came into fashion as a casual type of clothing. Ladies began to wear caps decorated with ribbons, flowers and beads as the main accessory to elegant dresses. Today it is exclusively a children's headdress. We will tell you how to knit a stylish cap on your own, which is suitable for a newborn baby if you crochet the product.

It is a very convenient and practical accessory. It will protect the baby's head from cold, wind, heat. The cap sits perfectly on the head, and thanks to the ties, it does not slip and covers the ears well. You can buy this headdress for a baby at any children's clothing store. But the cap that is tied with your own hands will be especially beautiful and comfortable. Indeed, during knitting, a mother or grandmother puts all her love and care into the product.

Crocheted comfortable caps for newborns look very attractive, and they knit very quickly. In one evening you can knit a charming and unique headdress for your little angel. Take a look at these pictures. Agree that these are real works of "handicraft" art.

In this article, you can see several step-by-step master classes for any level. Both boys and girls of infancy look cute and charming in these caps. The difference between models for boys and girls may be in the selection of colors and splendor of ruffles. For girls' hats, they knit voluminous, lush ruffles and decorate the cap with flowers and beads. For boys, more modest models are chosen. More details about knitting such things for boys and girls are described in the following sections of this article.

Crochet a Newborn Baby Girl's Bonnet

In the wardrobe of every little princess there should be such an airy snow-white cap.

To knit this model you will need Iris yarn, hook number 1.3.

Based on the diagram shown in the photo below, knit first in a circle (back of the head), and then, according to the arrows that show the direction of knitting.

The photos below show the work progress step by step.

When the cap is knitted, it remains to decorate it with decorative braid with flowers or any other of your choice. Along the upper edge between the ruffles, insert a string-tie and that's it, the hat is ready to decorate the head of your baby.

Delicate baby skin requires a special approach and attention: - this is exactly what will gently cleanse the baby's body and make bathing even more pleasant!

Attention to video tutorials:

We create products for a boy with our own hands in a master class

A newborn boy also deserves to look like a real prince. Therefore, a beautiful headdress will be very suitable for him. The next picture shows a crocheted bonnet for a newborn boy. With the help of our master class, it is not at all difficult to knit such a hat. Take on board a diagram and description and start creating. The result will not be long in coming. And soon your baby will be able to show off in a cute and comfortable headdress.

You will need cotton yarn, crochet hook # 2.

In knitting, the following types of loops are used: air loop, single crochet, double crochet, double crochet.

The finishing is knitted according to the scheme No. 1. Knit the crown according to the scheme No. 2. Density of knitting: 10 cm is equal to 24 loops.

Work sequence

Tie a ring from ce. and knit the top of the head according to pattern 2. You should get 96 loops. Then continue knitting according to pattern No. 3 in a circle, closing each row with a connecting post. At a height of 10 cm from the beginning of the main pattern, complete 2 rows of finishing according to scheme No. 1. Finish knitting.

When the cap is tied, thread the ribbon into the 1st row of trim. Tie strings from 5 vp. double crochet, sew them to the cap. That's all - the thing is ready.

Openwork option for novice craftsmen in a couple of evenings

Openwork patterns look the best in children's headdresses. An openwork crochet cap for newborns (the diagram of which is posted below) is an ideal addition to the baptismal outfit. Attention to the master classes below.

Here is such an openwork accessory for the head of a little girl, if we take the "Fans" pattern as a basis.

For knitting you need 100% cotton thread - 100g, hook number 1.5, satin ribbon.

Schemes and descriptions of work to create a product

Start knitting from the back of the cap according to the pattern number 1 (circle). Dial a chain of 5 vp and close in a circle.

1 row. 16 Art. s / n. in a ring from ce.

2 row. In each column of the previous row, knit 2 tbsp. s / n.

We knit 3-6 rows according to the scheme No. 1.

From the 7th row, go to knitting the main pattern according to scheme No. 2. On the 22nd row, finish knitting the pattern and tie the lower edge of the cap 1 next to Art. b / n., and after 1 next to st. s / n.

In the place where the circle transitions to the main pattern, knit a ruff. To do this, fasten the thread on the last row of the circle and knit 4 rows with the "Fan" pattern according to pattern # 2.

Insert a ribbon along the bottom edge. The work of knitting an openwork cap is done.

This option is more suitable for girls. But what about the boys? In the next photo, you can see another openwork cap that will suit both boys and girls if you make it in a different color.

For knitting, you need a half-wool yarn of about 30 g, hook number 2.5.

A selection of schemes for creating a little thing for a kid

Start knitting from the back of the head (circle). Dial a chain of 6 vp and close it in a ring. Then knit according to scheme No. 2. Having knitted a circle of 4 rows, on the 5th row start the side part of the cap, knit with the main pattern according to scheme No. 3. Having knitted 11 rows with a pattern, perform 4 rows of Art. b / n.

Tie the front edge of the cap with a border according to scheme No. 1. Decorate the lower edge with a plank of 72 st. b / n 8 rows.

Tie the strings. To do this, dial 85 vp. and knit 3 rows of st. b / n. Knit the second tie in the same way. Sew them on to the cap.

On the last row of the bottom, dial a chain of 84 vp. and knit lace according to scheme No. 4. Along the edge of the product, knit lace in the same way. Sew this lace to the cap between the rows from st. b / n. and openwork rows of sidewalls.

The master classes presented above demonstrate that it is not at all difficult for a baby to make such a headdress on his own. Create beautiful things for your beloved children. Enjoy your needlework!

Video tutorials for beginners

See examples of work on the video: