A modern person constantly travels, goes on vacation or on business trips by private car, bus, train, plane. By the way, a little over a hundred years ago there were no suitcases and travelers had to carry luggage in chests, boxes and knapsacks.

Before collecting on the road, the question arises of the need for a suitcase or travel bag. Depending on the purpose of the trip and its duration, the suitcase should have a different capacity. Therefore, whoever travels often must have several suitcases at his disposal and travel bags.

On the road, suitcases are subjected to significant physical stress and therefore break, handles and wheels break especially often. The main cause of breakdowns is its careless operation. Even if you handle your suitcase carefully on the way, there is no certainty that the movers at the airport will also handle it. in order to minimize the possibility of damage to the suitcase on the way, you should choose the right model when buying it, and of course it will not be superfluous to wrap the suitcase with a protective film before checking it in. This service is available at almost all airports.

Choosing a suitcase

Volume, suitcase capacity

One of the main parameters of a suitcase is its volume (capacity), which is measured in liters. Therefore, before buying, it is necessary to evaluate the volume of things on the road and, based on this, decide on the capacity of the suitcase. Valuables are not recommended to be carried in a suitcase if it will be checked in as baggage. Therefore, if there are more things than a small suitcase that can be taken with you as hand luggage in any type of transport, then it is advisable to supplement the suitcase with a travel bag in which to put essential things that are valuable and afraid of blows.

If the trip involves an airplane flight, then you need to take into account that, according to international rules, the weight of a suitcase or travel bag that you can take with you as hand luggage, should not exceed 8 kg, while having overall dimensions of not more than 55 × 40 × 20 centimeters. The weight of a checked-in suitcase must not exceed 23 kg, regardless of the number of travelers.

For example, two people are traveling, if the weight of one suitcase for two is 26 kg, then you will have to pay for 3 extra kilograms, and if you have 2 suitcases of 20 kg each, then you will not need to pay extra. Therefore, if in doubt, it is better to weigh the suitcase in advance so as not to pay for overweight or do repacking at the airport. The given data is for reference, since each airline, depending on the type of aircraft, may establish its own rules, which must be familiarized with before the flight.

There are suitcases, the volume of which can be changed by one third by simply unzipping it. Such a suitcase will help out on the way back, providing additional volume for purchases and souvenirs.

In the photo on the left, the zipper is fastened, and on the right, it is unzipped around the perimeter of the suitcase. As a result, the suitcase has become a third more spacious.

It should be noted that regardless of the volume of the suitcase, the design of the handles and wheels is designed for weight, as a rule, no more than 12 kg, therefore, if you plan to load a suitcase with a large weight, then when buying a suitcase, you need to find out from the seller what maximum load weight the selected model can withstand .

suitcase handles

Sergei Vladimirovich Mikhalkov in 1978 dedicated the fable “A Suitcase without a Handle” to the handle of a suitcase:
That suitcase has long been without a handle,
Leave it somewhere along the way
Yes, it’s a pity to throw it away, at least not to carry it with your hand ...

Has taken root among the people brief retelling fables of S.V. Mikhalkov: “like a suitcase without a handle - it’s hard to carry it, and it’s a pity to leave it.”

Therefore, when choosing a suitcase, special attention should be paid to the handle. The hand should fit comfortably on the arm when it is grasped. To do this, the handle of the suitcase must be round shape and of sufficient size. The fastening of the handle must be reliable - fastened to the wall of the suitcase with rivets or screws. On the inside, under the rivets, nuts or screw heads, washers with a diameter several times larger than the size of the rivet heads, screws or nuts should be installed. The fastening elements of the handles inside the suitcase are not visible, as they are located under the fabric lining, but are usually well felt by hand.

If you buy a suitcase on wheels, then there should be three handles. One on the side and two on the end. One is stationary, the same as on the side, and the other is retractable. A stationary handle on the end is needed in order to be able to carry it over curbs and other obstacles without sliding the retractable one and without turning the suitcase.

The retractable handle should be long enough so that you do not have to bend when rolling the suitcase. The handle must be provided with a mechanism for fixing it in the recessed position and extended. In the retractable handle shown in the photo, a compass is mounted in the control button of the latches. A trifle, but nice.

About zippers and suitcase lock

The zipper must be made of plastic, large, reversible (have two runners so that it can be fastened from either end), and remain functional if up to two adjacent teeth are lost. The slider keychain should be of sufficient size to be comfortable to hold in your hand when fastening the zipper.

It is desirable that the trinkets of the zipper sliders can be fixed in the lock. Although such a lock is weak protection from opening, but still, at least some kind of security element.

About the material of the suitcase

Suitcases come with a soft and hard case. Soft suitcases are made of polyester and nylon impregnated with a water-repellent composition. Solid ones are made of plastic reinforced with metal shavings. They are heavier than soft suitcases, but due to the absence of deformation when squeezed, they allow you to transport fragile items. Plastic is easily scratched, and if the suitcase comes into contact with the conveyor shoulder on the conveyor belt, a mark will remain on the case. Therefore, to protect against abrasions, a plastic suitcase must be wrapped with a film before being checked in as luggage.

About the suitcase on wheels

Now suitcases on wheels are very popular, because even with a large suitcase weight, no more muscle strength is required to move it. When choosing a suitcase on wheels, it is obvious that the larger the diameter of the wheels, the less dynamic load they will have on rough roads.

Two or more wheels are installed on suitcases. How more wheels, the better if the wheels are on the same axis, since the load on an individual wheel will be less, and with small holes the suitcase will roll smoothly. Silicone wheels are considered the most reliable, but I did not notice that rubber wheels do not last long. It's just a matter of rubber. The wheels of all cars, even trucks, are made of rubber and they cover thousands of kilometers. The wheels of a suitcase travel no more than a few hundred meters in one trip. So on the material from which the wheels are made, you can not focus on.

As a rule, the breakage of the wheels of a suitcase is not due to their poor quality, but due to the fact that the suitcases are abandoned by loaders during reloading at airports. If the suitcase is heavy and it was not “lucky”, it landed during an overload after a flight on a wheel, then no matter how strong it is, either the wheel itself or its fastening can still break. Such a fate befell my suitcase, I had to do repairs.

Suitcase repair

Stationary handle repair

The available suitcase was too large for one traveler, and the wife decided, when she was going on a trip to one of the European countries, to buy a new, more expensive and smaller suitcase.

But what a surprise it was when at home, upon a careful examination of the suitcase, it turned out that one of the rivets that fixes the fastening of the handle to the base of the suitcase broke and hung in the air. While the empty suitcase was being carried home from the store, the rivet fell off. It's good that the handle didn't break during the trip.

It was possible to return to the store and replace the suitcase under warranty, but it was faster to fix this breakdown with my own hands, which I did.

A pleasant surprise was the presence of a zipper on the inner lining of the suitcase. To get to the place of installation of the rivet, it was enough to unfasten the snake.

Instead of a rivet, I took an M4 screw with a conical head, which fit well into the plastic washer installed at the factory under the head of the rivet.

On the inside of the suitcase, a nut was screwed onto the screw, to prevent its self-unscrewing, a lock nut was screwed on top. The washer was not enclosed, as a profiled steel bar ran along the entire perimeter of the suitcase. An external examination of the remaining rivets did not reveal any defects and I hope that I will not have to deal with the repair of the stationary handles of this suitcase anymore.

Retractable telescopic handle repair

The repaired stationary travel test handle survived successfully. But another breakdown occurred on the road, it broke off from the sides of the retractable handle from the telescopic tube.

In order not to break the telescopic tube, I had to not roll the suitcase on wheels, but carry it with my hands by the previously repaired handle. She passed the test.

To repair the retractable handle, you must first disconnect it from the telescopic tubes. To do this, it is enough to unscrew one self-tapping screw on the sides of the tubes.

When the handle was removed, it turned out that it consists of three parts, a handle for which they take the suitcase when carrying it, and two corners. The shank of one of the corners broke off. It is almost impossible to find such a spare part, so I had to think about how to repair the handle by hand.

The corner to the base of the handle was attached with a single screw 18 mm long, deeply recessed into the tail section. It became obvious that this was a mistake of the designers in an effort to save on the length of the screws and plastic. It was not possible to restore the integrity of the shank by gluing or otherwise with sufficient strength. Therefore, it was decided to fix the shank to the corner and at the same time fix the corner to the base of the handle using a long self-tapping screw or screw.

There was no self-tapping screw of a suitable length and diameter at hand, so I decided to fasten it using the available M4 threaded screw. Since the diameter of the hole in the shank of the handle was almost equal to the diameter of the screw head, flat washers had to be installed.

The holes in the corners were drilled with a 4 mm drill. To prevent breakage of the second corner, it was also attached, like the broken one, with a long screw. The surprise was that the corners were made of different type plastic, as evidenced by its color. One corner was white and the other black.

In the handle itself, in places where self-tapping screws used to be screwed in, through holes with a diameter of 4 mm were also drilled. If self-tapping screws are used for fastening, then without fail it will be necessary to drill holes with a diameter equal to the inner diameter of the thread of the self-tapping screw, otherwise it will be impossible to tighten the self-tapping screw.

Next, a nut was screwed onto the screw and, using a soldering iron, was fused flush at the base of the handle. Previously, a hole with a diameter equal to the minimum distance between the faces of the nut was expanded for the nut.

After the nut has been melted into the handle, the resulting plastic flows are cut off with a knife or removed with a file. The preparatory work is completed, and you can begin to install the handle on the telescopic tubes.

The broken off shank, rather for ease of assembly than for fixing, was glued to the base of the corner of the handle with Moment universal glue. All the same, the shank will be securely fixed with a screw, and its rotation will be limited by the walls of the telescopic tube.

It remains to insert the handle shanks into the telescopic tubes and fix with two self-tapping screws. The retractable handle has been refurbished without compromising the look of the suitcase. Now the suitcase is ready to travel again. I hope that the wheels and other details of the suitcase will no longer fail.

Wheel repair

My suitcase had eight wheels on one axis, which was a thin-walled tube. The wheels were fixed at the ends of this axis with the help of two pins threaded into the holes. Since the walls of the tube were thin, after each trip this tubular axis was bent, and it had to be leveled so that the wheels were on the same geometric axis. But the last time, during the reloading of the suitcase, the wheels were hit so hard that one of the pins was cut off, and two wheels were lost. The suitcase is still in excellent condition and I did not want to buy a new one due to the loss of two wheels. I had to get it repaired. Couldn't find the right size wheels. I decided that the remaining six would be enough to move the suitcase, if we strengthen the axis on which they are installed.

It was decided to strengthen the axle of the wheels with the help of a metal bar inserted inside the standard wheel axle. Therefore, the new axle length was chosen a couple of millimeters more than the width of the remaining six wheels.

Nuts were used instead of studs to securely fasten the wheels to the axle.

To do this, a thread was cut at the ends of a metal bar, with a length greater than the tubular axis by the width of the thread.

How to cut threads on the axis of the wheels

You can cut threads at home using a die installed in a die holder. To do this, in order for the die to easily cut into the metal, it is necessary to chamfer the end of the bar.

To cut the thread on the axis, you need to press the die with the intake part to the axis and, pressing strongly from above with one hand, rotate the die holder by the handle. After a few revolutions, the cutting edges of the die will enter the metal and threading can be continued without pressure from above. To facilitate threading, you can moisten the axis with a drop machine oil. The thread is cut in one pass.

When the thread at both ends of the bar is cut, it must be inserted into the tubular axis and you can proceed to install the wheels on the suitcase. Cup washers were used for aesthetics and impact protection of the nuts.

Since the tubular axle is slightly longer than the assembly of the wheels, when put on an additional axle, the cup washer rests against it and can be pressed tightly with a nut. In this way, reliable fixation of the nut from self-loosening is ensured.

To completely eliminate the possibility of losing the wheels of the suitcase, the lock nut was additionally tightened, and the end of the axle was slightly riveted. Now even with a wrench it will be difficult to unscrew the nut.

The reliability of the repaired suitcase wheels has been tested by travel practice. Nine flights by plane of a suitcase weighing more than 15 kg with check-in and rolling it on paving slabs did not in the least affect the straightness of the axis and the condition of the wheels.

Due to the reduction in the number of wheels in the suitcase, the outer wheels have become further from the corners of the suitcase, so the likelihood of the suitcase falling on the wheel when overloaded by movers has significantly decreased.

Repairing the legs of a suitcase using improvised material

The new design of fastening the wheels successfully withstood a long journey, but the plastic base, to which the legs of the suitcase are cast, cracked at the transition point to the legs. It became obvious that the legs of the suitcase could fall off the next trip at any time. When a significant lateral force of the hand was applied to the legs, they broke off. I had to repair the suitcase legs.

It is useless in this case to securely connect the broken legs to the plastic base with glue or by catching metal brackets, since when the suitcase lands on the leg for the first time, it will break off. So I decided to make new legs.

To install a new design of legs on a suitcase, you first need to remove the old plastic base, which is screwed to the suitcase body using two screws and M4 nuts. The screw heads with large washers are inside the suitcase under the skin, and the nuts are recessed into the base and a thin-walled socket wrench was needed to unscrew them. I had one, made with my own hands from a piece of tube.

When holding the screw heads by hand, with the help of a wrench, the nuts were easily turned away, and the base was removed as unnecessary. To extract the fixing screws with washers from the inner lining of the suitcase, I had to cut it at the bottom of the suitcase by a couple of centimeters.

A piece of aluminum electrical wire with insulation with a diameter of 6 mm came under my arm. Of course, it would be better to make a leg out of an aluminum tube, but there was no such one. With the help of a vise, the wire was shaped into future legs.

The leg is fixed in the metal square regular tubes of the suitcase with the ends bent twice with the help of longer M4 screws. In order for the leg to be tightly fixed, plywood inserts 8 mm thick, 50 mm long and wide, providing a snug fit in a rectangular tube, are inserted into the remaining free space of the tubes.

After the leg and liners are installed in the square tubes, they need to be fixed. To do this, in the center of the square pipe at a distance of 20 mm from the end, points for drilling are first punched. Further, with a 4 mm drill, through holes are drilled at the designated points, through a square tube, double-folded aluminum wire - a leg, an insert, the second side of the tube and the suitcase body.

A screw is inserted into the drilled hole, a wide, previously standing washer is put on and the screw is fixed inside the suitcase with a nut. To prevent its unscrewing, a lock nut is screwed on. To prevent protruding wines from ruining things, you can put a plastic cap on it.

The new leg looks good, if you need to change its color, then before bending, you can put a thermo-shrinkable tube on the wire. They are available in all sizes and colors.

The test showed that the new leg of the suitcase provides good vertical stability with varying degrees of loading.

Production of new suitcase legs from aluminum profile

For a dozen flights, the legs of the suitcase, made of aluminum wire, lasted, but when overloaded in the luggage compartments, each time they bent, and I had to straighten them with my hands. As a result of repeated bending, the wire broke. I had to make new, more reliable legs.

U-shaped aluminum profile was available. From it I cut out new legs for the suitcase, which are shown in the picture.

From the profile, a couple of segments were sawn off with a hacksaw with a width equal to the inner diameter of the square tube of the suitcase.

A hole was drilled in the center of one side of each leg, matching the hole in the suitcase's square tube.

The square tube was inserted into the plastic wheel mount and secured to the base of the suitcase with a 6mm screw and nut.

The nut was applied self-locking, so as not to unscrew. If this is not at hand, then you can use two simple nuts tightened towards each other. In order to prevent the nut from breaking through the body of the suitcase, a wide washer was installed.

The legs of the suitcase have already withstood a dozen overloads at airports. But even if they break, then in half an hour it will be possible to make the same new ones and replace them. The design lived up to expectations.

It's time to get ready for the road and, as usual, the fees are postponed for last days. And then we realize with horror that we need a new suitcase or travel bag, but there is no time.

How many suitcases, travel bags and money were thrown away? A reasonable solution in this situation would be to repair your travel bag or suitcase. High-quality accessories and fittings will restore the former look. Replacing broken parts, eliminating cuts, scuffs, breaks and scratches is done efficiently and on time, and your favorite handy bag will serve faithfully for quite a long time.

Services of a workshop for the repair of travel bags and suitcases

To extend the life of your travel bags, we will carry out the following quality work:

travel bag wheel replacement
travel bag zipper replacement
repair of cuts and tears
removing scuffs and scratches

As a rule, fate does not spare suitcases, no matter how high quality they are. During transportation and transportation, they are not handled very carefully, and this leads to the need to carry out the following repairs:

retractable suitcase handle repair
retractable suitcase handle replacement
suitcase zipper replacement
suitcase accessories
replacement of code locks
sewing suitcase repair
suitcase body repair

How many more wonderful keepers of luggage and things can be thrown into oblivion? Every time this question arises when a ripped seam or a broken fastener is found. And you can use the service of our workshop. This will save money and time on the purchase of another bag or suitcase. Moreover, we have the equipment and experience for the restoration and complex repair of bags of famous brands. We provide a guarantee for the work done on time, but you do not have to use it, because the work of our craftsmen is done with high quality and for a long time.

Our workshop is located in Dom Byta, which is located in the South Administrative District of Moscow, in the Zyablikovo district, within walking distance from such metro stations as: Shipilovskaya, Krasnogvardeiskaya, Zyablikovo and in close proximity to the Maryino, Borisovo, Domodedovskaya and Alma-Atinskaya metro stations. Our address: st. Musa Jalil, 27, kor. 2, p. 2.

Note!!!
Our House of Life is located inside the yard, behind the house 27, building 2.
Do not confuse us with the repair of clothes and shoes,
which is located in a small annex at the end of the Pyaterochka store!
They, changing signboards, call themselves "life service" or "house of life" - THIS IS NOT US!!!

A century ago, travelers used chests, knapsacks and bags to transport things. Today a suitcase is an indispensable attribute for a modern person whose life is connected with moving and business trips. It is also important for those who just go on vacation a couple of times a year. The criteria by which you should choose it is the spaciousness and convenience of the handles.

Rules for choosing a suitcase

When choosing a "companion" for travel, you need to pay special attention to some parameters:

Broken handles and how to fix them

Sometimes the strongest-looking suitcases break. If the model is branded and of high quality, then a breakdown may occur due to improper operation, overload. And not always the fault of the breakdown lies with the owner. Airport loaders can handle baggage negligently.

Most often, the handles break. Do-it-yourself repair of a suitcase on wheels, if the rivet securing the handle is broken, proceeds as follows.

• you need to find a place to install the mount from the inside;
• prepare the necessary tools - M 4 screw with a cone head (or other suitable one), 2 nuts;
• insert a bolt into the hole of the broken fastener, tighten it from the inside with a nut.

For reliability, tighten another nut well on top..

How to repair a suitcase on wheels yourself, if there is no corresponding workshop nearby, your ingenuity will tell you. Even if the breakdown occurred at the time of travel, you can use improvised materials. For example, to use a belt:

• one, and preferably 2 belts, you need to drag the product along in 2 places;
• in the place where the broken handle is located, you need to pass an oblong object that will replace it.

No belts? They can be replaced with rope. In this case, the repair system does not differ from the previous method. If there is no object nearby to replace the handle, then it can be made from the rope itself. To do this, the string must be twisted and wrapped with adhesive tape at the bottom, leaving the rope ring as an impromptu handle.

Damage to the telescopic handle for a suitcase or retractable handle is difficult to eliminate in the "field" conditions.

The easiest way is to purchase a new telescopic handle and replace the broken one with it. Of course, repairs can be made by contacting specialists, but this is a rather costly pleasure. In emergency situations, you should try to fix the breakdown yourself. This requires tools and skills to work with them.

To replace a broken handle with a new one, you need:

The algorithm for repairing a retractable suitcase handle with your own hands is as follows:

This sequence will help when the handle has broken off from the telescopic tube at the point of its fixation.

Description

A person would not be a person in all the richness of the manifestations of his own nature, if he had not been possessed with enviable regularity by "wanderlust". It is only in the song that they say, "I will not leave with things, I will leave with myself." In fact, no matter where we go, no matter how we swore to ourselves to go on a trip light, so as not to “drag too much” - it’s all the same: there are much more things that it’s simply impossible to do without on vacation or on a business trip. was supposed at the time of "good intentions".

A good, beautiful, roomy and comfortable suitcase is a high-status and extremely important item. Plus, it's not cheap at all. And he, like any actively exploited thing, sometimes needs repair of suitcases - the service of the workshop of the Prosper-SB household in Moscow. Our experienced craftsmen have been specializing in this kind of services for a very long time, therefore, if you need to repair a bag, suitcase, briefcase, then you are welcome to the workshops of the Prosper-SB household!

... A miraculous transformation of a travel bag into a suitcase took place in the middle of the 19th century, when Frenchman Louis Vuitton, a “suitcase master”, opened his own trading house in his homeland. Witton's products quickly glorified the family name, and since then the suitcase has become unfadingly popular in the orderly ranks of the multi-million army of travel enthusiasts.

The suitcase of the “today” era is a rather complex design, pleasing to the eye, equipped with several handles, including a retractable handle, combination locks, a large number of internal compartments, secret “rooms” and fasteners. All this magnificence is often on wheels, which gives another “one hundred points ahead” to an ordinary travel bag. Of course, having “spoilt” on such a “trifle”, I want to wear / carry it as long as possible. Repair of suitcases on wheels, and without them, is a necessary thing, which is why, moreover, not a single suitcase can do without it in its long life. C'est la vie, as the French say...

It has been proven that a suitcase usually breaks when it is least expected of it. At the airport or train station, when there is no time and place to eliminate this unfortunate accident. And then a torn off wheel, a broken retractable handle, a “jamming” lock or a broken lightning turn from a minor nuisance into a “catastrophe of a universal scale”. Therefore, before you go on a trip - take the time to look at us, in the workshop of the Prosper-SB household: we repair suitcases in Moscow and the Moscow region, eliminating any troubles that can befall your faithful "fellow traveler". Also, here you can repair a briefcase, bag, repair a backpack or diplomat.

High-quality repair of the handle of a suitcase and other elements implies the presence in the workshop of original fittings and all kinds of branded parts, the elimination of problems of any complexity associated with attaching handles to the case. If you need to restore a broken wheel - replace a bearing or holder, then the master’s arsenal should have an extensive selection of spare parts for the wheels of suitcases from leading brands. In "Prosper-SB" repair of suitcases in Moscow and the region is carried out in the most short time and no problem. We will select all the necessary parts, carry out the replacement of handles, rings, carabiners, wheels. We will eliminate abrasions, tears, scratches, cuts, we will sew textiles and leather, we will restore the product, we will strengthen the cracked body of the suitcase made of plastic.

Let's perform metal repair work: we will repair and restore any type of suitcase locks - whether it's a regular zipper, a combination lock or a complex built-in lock. If necessary, we will repair suitcases by opening the combination lock without damaging it. We will install new rivets, buttons, eyelets, carry out a comprehensive replacement of metal fittings. Tighten the screws using thread locker.

Here you can repair the handle of a suitcase - both regular and retractable. When repairing products, our craftsmen are guided by the “do no harm” principle, so no matter how difficult the repair work is, we will carry it out in such a way that appearance, the color and texture of the suitcase remained in its original form.

We do, among other things, urgent repair of suitcases in Moscow and the region, therefore, by contacting us at one of six convenient addresses in the capital and Moscow region, you can receive an excellently repaired product in the shortest possible time.

Here you can also always use other important services - repair clothes or shoes, repair watches, sharpen skates, knives or other tools. House of life "Prosper-SB": we work to help you!

Brief price list for luggage repair services

Replacing plain black plastic handle	500-1200 rub.
Replacing the plastic handle with decorative. metal inserts	700-1400 rub.
Replacing the leather handle	600-1800 rub.
Replacing the metal handle	800-1200 rub.
Replacing the cast massive metal handle	1000-2000 rub.
Retractable handle replacement	1500-2500 rub.
Simple lock replacement	350-500 rub.
Replacing a lock with a key	500-1000 rub.
Replacing the combination lock	1500-2000 rub.
Lock decoding	300-500 rub.
Magnet Replacement	250-600 rub.
Wheel replacement (1 pc.)	600-800 rub.
Double bearing wheel block replacement	800-1000 rub.

You can check the rates by looking at price list for the repair of bags and suitcases or by calling the number closest to you

Travel suitcases are indispensable attributes of travelers and people who often go on business trips. They are made of plastic, fabric, metal or leather and come in different sizes and designs.

But sooner or later, any things fail, and in this case, the repair of suitcases on wheels is required - in Moscow this service is especially popular due to the large flow of people from different cities and countries who get into trouble during the trip.
The masters of the LiLi household salon on Kantemirovskaya are ready to perform suitcase repair of any complexity and restore the performance of both molded plastic models and ordinary fabric bags (cases).

Repair of suitcases with a home visit to replace the handle or its fragments

In inexpensive suitcases, this element often becomes unusable, while the breakdown options can be very different - the handle pops out of the grooves, breaks, does not protrude from the socket. The reasons may be different, but most often everything is related to improper use and exceeding the permissible weight.
We repair the retractable handle of the suitcase, if it is still possible, or replace it entirely. If necessary, we will repair suitcases with a visit to the client's home. Also, specialists can restore ordinary carrying handles if they are torn or broken off. It is worth noting that the repair of the handle may be necessary when repairing bags and leather goods.

Repair of suitcases to replace wheels for movement

The quality and wear resistance of the wheels is highly dependent on the price of the product. Usually they break due to the ingress of debris, which acts as an abrasive on the bushings and bearings, incapacitating them. If handled carelessly, the part may break off completely. In this case, our masters will select a similar spare part and replace the damaged one or replace all the wheels at once.
The LiLi household salon also performs other repairs of suitcases on wheels with delivery in Moscow, related to the replacement of locks, accessories, restoration of the body geometry and elimination of dents, at the following addresses:

• st. Kantemirovskaya, 47 (TC "Kantemirovskiy");
• st. Kantemirovskaya, 6.

We value our clients and understand that the modern pace of life does not always allow us to find time for all the necessary things. Departure of the master- the best solution for busy people. We are ready to come to the specified place at a convenient time for you. You can find more details about the service in the "Departure of the master" section.

Suitcase repair with delivery near Kantemirovskaya metro station

Repair elements	Price, rub. *
Repair of retractable handle, retractable system
Replacing the retractable handle of the retractable system
Wheel repair, wheel system
Changing a wheel and/or wheel system
Overhead handle repair
Replacement handle
Unlocking the lock code
Opening the lock, making a key
Lock and latch repair
Replacing the lock code, latches
Slider Replacement
Lightning repair
Replacement zipper (10 cm)