Olga Gavrilova

The official holiday Mother's Day in Russia appeared recently. Until 1998, our dear mothers, like all Russian women, had only one holiday - March 8. On January 30, 1998, Russian President Boris Nikolayevich Yeltsin signed a decree on celebrating the All-Russian Mother's Day on the last Sunday of November.

Over the years, Mother's Day has become one of the most beloved Russian holidays.

We are always preparing for this holiday with the guys. And we want to tell you what gifts we love to give on this wonderful day. For several years now, a favorite gift has been felt fridge magnet. This time we have prepared heart magnet. We needed for work: felt red and pink, beads, magnets and glue MASTER.

So, first of all, we prepare two templates of hearts of different sizes.

Then we sew beads on a smaller heart.

Then glue the smaller heart to the larger one.

And we finish the work, glue magnet on the reverse side.

These are the hearts we have.

And these works are from previous joint holidays.

We wish you success in your preparations. felt magnets.

Related publications:

Software content. Develop cognitive skills in children research activities through experimentation, search activity;

Good afternoon, dear colleagues! Behind the series of our everyday life, when we are sure to do something with our children, it is always imperceptible.

As part of the project for the anniversary of the city of Velikie Luki, I came up with the idea to make a game on the magnetic board “My city is Velikie Luki”. In Group.

I wanted to make simple souvenirs with the children as a gift. But I had nothing: no blanks, no suitable materials. I had to.

The Christmas tree is the most important attribute of this holiday! And a wide variety of Christmas trees is just pleasing to the eye. Green, red, multi-colored and luminous - all this adds to us a rainbow-colored winter mood and a pleasant atmosphere. We turn on fantasy, imagination and turn our plans into reality.

This workshop on making felt magnet "Winter Christmas Tree" It will take very little time, and the result will pleasantly surprise you! beautiful gift dear friends will be very helpful.

• Felt different colors: White; green;
• Polyester threads white color;
• Fine needle;
• pins;
• Scissors;
• Silicone glue (stick);
• Lighter;
• remnant;
• White beads;
• Magnetic tape.
• Thin gold lace;
• Thin two-color bindweed.

Felt magnet "Winter Christmas tree" - master class

We take the green felt and fold it in half to bring out the symmetry on the future part. With a remnant, draw the shape of a Christmas tree. It is worth noting that she unusual shape with rounded ends. If desired, you can change the shape of the Christmas tree a little, but this is to your taste.

Now we are making snow. To do this, put the Christmas tree on top of the white felt and trace the outline of its extreme cut. Then we finish the shape in the form of melting snow (in waves). We carefully cut everything with small scissors. You should get 3 snow patterns.

We sew our snow on each row of the Christmas tree. We carry out manual running stitches of a small size using a white thread. Make sure that no extra dark pile gets into the line. All lines are smooth.

Then we sew white beads in a chaotic manner. On the reverse side we do not cut the Christmas tree thread, but we make transitions between the beads. In the future, the back side of the magnet will not be visible, since it is one-sided.

At this stage, we decorate the Christmas tree with a bindweed. With a remnant, you can draw a line for gluing this braid. We use silicone glue. On the reverse side, we must fasten the ends of the bindweed.

Now let's make the bows. We need 3 of them. Making them is very simple: first we tie a knot, and on top of it the bow itself.

Magnets can not only be brought from travel, but also created independently from various materials.

Making a felt magnet with your own hands in the form of a funny slap is very simple. Its design, color and size may vary depending on the flight of your imagination. Such a mini-souvenir will decorate your home refrigerator or will be a wonderful gift for no reason. The master class is perfect for those who are just looking at bright felt sheets and are afraid to approach complex crafts, as well as for those who do not know what to do with the remnants of the material.

Materials for the master class

To make a felt fridge magnet, reminiscent of a beach holiday, you need to prepare:

• cardboard, you can take thin or thick, but not corrugated;
• waxed cord;
• felt (2 colors); for the base of a slap, you can take any, and for a flower, only a dense one is suitable;
• bead or stone;
• universal glue;
• magnet;
• glue gun.

Step by step instructions for making

Draw the shape of a slap on cardboard and cut out the figure with scissors.

Attach the cardboard blank to the felt sheet and circle with a simple pencil.

Cut out the felt sole with scissors and glue it to the cardboard blank with any universal glue. When the glue is completely dry, continue working.

Cut a small piece (about 3 cm) from the waxed cord. At the front of the sole, put a drop of glue (from a glue gun) and glue the ends of the cord, creating a loop.

Also, from the waxed cord, weave a pigtail and tie knots on both sides. In front of the knots, put a little glue on the pigtail. After the glue dries, cut off the knots.

On the left side of the slap, apply glue from a glue gun and attach one end of the pigtail.

Pass the pigtail through the loop and glue the other end on the right side.

The felt magnet in the form of a slap is almost ready, it remains to decorate it.

From a thick felt sheet of a different color, cut a circle bigger size, but from the same color as the slap, smaller. It is not necessary to take the material of the same shade as the sole.

With nail scissors, make something that looks like a flower. Then glue the smaller flower to the larger one, and the smaller one to a bead or stone.

Attach the flower to the flip flops.

It remains only to glue the magnet to the felt, and send the slap to the refrigerator. Such a bright souvenir will remind you of warm days and rainy autumn and cold winter.

You can show this master class to a child or do conscientious needlework. If you are looking for more complex ones, take a look at this topic. we also have an MK for creating . Creative ideas for you! We are always glad to see you on our website and among friends in social networks.

But today we will make such felt flowers with you:

In fact, making such magnets from felt (or maybe they will? ;)) is very easy and having made the first flower, you probably won’t even have time to notice how the whole bouquet will be ready. By the way, older children will be happy to help you with this. You can, for example, instruct them to sew on details. A great training for young craftswomen who have just started their acquaintance with sewing!

This tutorial was created Purl Soho and Purl Bee. All rights to the pattern and model are protected by copyright law. Neither the template nor products derived from it may be used for sale. You can find the original tutorial on Purl Bee. It was translated by me (Anastasia) from English into Russian.

Purl Soho and Purl Bee cannot verify the accuracy of this translation, but should you have any questions, they are always happy to answer them at English language on the www.purlbee.com

Necessary materials:

1. Set of felt in pastel colors
2. Round neodymium magnets
3. Cotton threads (white, pink, blue)
4. Printed and cut sample flower
5. Scissors

How to make felt magnets with your own hands

First of all, you need to cut out the details from felt according to the pattern. For one flower, you need 3 “Petals” parts in color A and 1 “Head” part in color B. Choose any colors. Here, for example, light pink and dark blue were used.

From one edge of the core rectangle, make narrow cuts with scissors, not reaching the end each time. You will get a fringe.

Sewing the details of the felt anemone

Place the parts with petals one above the other at an angle of 60 °, as shown in the photo. The outlines of the future flower are already visible.

Fasten the two upper layers together with a thread and a needle (take the thread to match the tone of the core, in this case dark blue). Don't touch the bottom layer yet! You'll deal with them a little later. Tie a knot at the end of the thread and thread the thread through the two layers of petals where they intersect. See photo for clarity.

Now it's the turn of the fringe. Pass one end through the bottom and the other through the top. You will get a small stitch on the fringe.

Pass the needle through two layers of petals, while holding the core.

Return the bottom layer to its place and start sewing the core to the petals in a circle. Use a running stitch. When you have sewn more than half of the core, stop!

Unscrew the back layer of the petals and place a magnet in the stitched circle (it is best to use a small neodymium one). Now you can finish stitching.