In our group there is an Orthodox corner, there are books, icons, a children's prayer book, a candlestick, candles, holy water, willow twigs, only the temple was missing. Here we are with the children, with the help of their parents, we decided to make a church, which is now in our group, in an Orthodox corner. Every year on the feast of Easter we set the Easter table, where our temple occupies a central place.

The execution sequence is as follows:

1. Collected plastic bottles. Prepared plasticine, white paper, glue, white emulsion, green color scheme, foil, wire.

2. We assembled a rough design from bottles.

3. 1st layer was covered with paper, allowed to dry, 2nd layer was made of papier-mâché, also given

dry.

4. We painted the temple with a water-based emulsion tinted with green tint.

5. We inserted wire crosses into the domes, cut out small squares from the foil and glued them to the domes from the bottom up.

6. Long strips of foil were cut out onto the roof of the temple and glued with plasticine and glue.

7. They attached windows and doors from the Lego constructor, glued the face of the Mother of God over the central entrance.

This is how the temple turned out!

The joint work of the educator of the MDOU of the child development center - d.s. No. 10 Gapchenko Natalya Viktorovna and children from the city of Alekseevka, Belgorod Region.

Series of messages " ":
Part 1 -
Part 2 -
Part 3 -
Part 4 - DIY Temple
Part 5 -
Part 6 -
...
Part 41 -
Part 42 -

Introducing step-by-step photo tutorials that will teach you how to make a church out of plastic bottle, plasticine, toothpicks, paper and even pasta.

If you know how to make a church, then you can make this craft from various materials. Not only cardboard will be used, colored paper, but also matches, and even pasta.

How to make a paper church

To make it, take:

• whatman;
• cardboard;
• acrylic paints;
• a plastic bottle with a domed top;
• acrylic paint different color, including gold and silver;
• scissors;
• glue;
• blue colored paper;
• marker;
• ruler;
• icons scanned on paper.

Before you make a church, provide a pedestal for it. Make it from a sheet of thick cardboard, and cover it with paving stones printed on a color printer on top. Now let's start painting the details. To make the walls, you will need to cut out four such blanks by connecting them.

Cut out rectangles from blue paper, using a ruler and a black marker, draw these future windows as follows.

Cut out the door from brown cardboard, glue both rectangular and semicircular elements on top of it so that this part becomes more voluminous and it is clear that there are stones or bricks on it.

Cut out two door handles from yellow cardboard. To make steps for entering the church, you will need to cut semicircles out of cardboard different size, then glue them in order, starting with the smallest ones, ending with the largest ones at the bottom.

To make a dome for a church, cut the top off a matching bottle. All of it needs to be pasted over with plasticine, close the hole in the neck area and make this part more elongated. Then glue the dome with pieces of newspaper, wetting them in PVA glue.

Prime the dome using a real primer or white paint.

By this time the primer has dried, now you can paint the dome with gold acrylic paint in two or three layers.

Glue the windows to the appropriate markings. Glue the dome on top.

See how you need to assemble and arrange the workpiece. After gluing windows to the walls, attach a brown tape with small windows to the bottom, then glue the church layout to make it voluminous. Do not forget to stick on the appropriate places and icons. Glue the paper on top to become the roof.

Color her silver paint interspersed with brown. And with the same composition, mark the forged elements above the visor of the first door, and the column of the other must be painted with brown paint. Glue a silver cross to the dome, then glue the tower in the center of the composition.

Here's how to make a paper church. The process is very interesting, and you and your child will create such a significant thing from improvised materials. This is a model of the church, which is called "Hodegetria of Jerusalem", and it is located in Taganrog.

The next master class will also be easy for the child if you help him.

DIY pasta church

It is from this material that the next church will be built.

These flour products will create walls, openwork pasta will become decoration elements. Here is what you will need to take:

• pasta of different textures;
• scissors;
• pencil;
• ruler;
• long cover;
• foil;
• hot gun;
• cardboard.

Create a hexagon out of cardboard, then use it to make walls of this shape. Cover it with pasta.

Attach flat noodles at the corners and at the top to complete the finish. And with openwork elements you need to steal the top of the walls and make columns by folding this pasta in a pile.

From a sheet of cardboard, cut out a hexagon, as well as a cone. Glue the elements together. Using a hot gun, attach flat pasta on top. Decorate the junction of these two figures with semicircular pasta.

Make a dome from openwork vermicelli. To give it a shape, you can glue the top of a plastic bottle, which is made in the form of a dome, with these flour products. Glue a cross made from flat pasta in the center. Attach this dome to the created roof.

From cardboard, cut out the porch of the following shape, glue it on the outside with pasta.

Decorate the corners of this product with flat noodles, and also decorate the roof over the porch with these pasta and horns.

Cover the elongated cover with plasticine, and then glue this part with foil.

You have a bell. Use a glue gun to stick it in place. Here's how to make a DIY pasta church.

If an adult needs such a thing, then he can use matches as a material. The work is more painstaking, but very interesting.

How to make a church out of matches - step by step instructions with photos

To create such beauty, take:

• candy box;
• toothpicks or matches;
• PVA furniture glue;
• copper wire with a cross section of 0.33 mm;
• for the base - fiberboard, chipboard or plywood;
• floral candy foil;
• veneer.

Here are the tools you will need:

• ruler;
• sharp knife;
• eraser pencil;
• curved or straight scissors;
• bar;
• tweezers;
• compass;
• clothespins;
• carnation 2 mm.

The Lazarevskaya church of the 14th century was taken as the basis.

The master used this photo, making markings here. Redraw or reprint this drawing to know what dimensions will need to be considered when creating a church with your own hands. Calculations are given in millimeters.

To make it easier to make a temple, keep in mind that you need to conditionally divide it into 3 parts. The central one is the church itself, the refectory is located on the right, and the altar is on the left.

Here's how to make a church. To do this, take a thin cardboard and draw four walls, which are a square with sides of 5 cm.

As you can see, you need to draw windows in two walls, then cut them out with a thin knife or scalpel.

You can use matches, toothpicks or a wooden stack to build walls.

The next step is to determine the length of the wooden blanks. If you took a long stack, you will need to cut off parts from it. If toothpicks are used, cut off the sharp ends.

Now you can start making the temple. First decorate the wall on which there is glass.

See how you need to arrange wooden blanks, gluing them.

As you can see, these logs need to be moved through one - then to the left, then to the right. Now cut a strip of cardboard measuring 5 by 2 cm. Bend it approximately in half in the middle.

Make 4 such corners, and with their help assemble the frame of the future structure. As you can see, these corners need to be placed vertically and glued to each of two walls.

Measure the width of the wooden log so you know how much bigger the wall has become. Initially, it is 5 cm, if the thickness of this wooden blank is 3 mm, then it turns out that now the wall is 53 mm. But since the “logs” protrude in both directions, it means that now the wall width is 56 mm. Therefore, it is necessary to cut out two triangles of exactly this width for the pediment. If you have other calculations, then simply attach the wall to a sheet of cardboard and cut two triangles along its width.

Now you will need to glue these two triangles with wooden blanks.

Then attach these gables on both sides to the log cabins, glue them, fix them in this position with clothespins until the glue is completely dry.

Here's how to make a matchstick church next. While the main building dries up, you will be engaged in the manufacture of the refectory. Also make four cardboard walls for it, mark windows on three, and a door on one. The windows must be cut with a sharp knife, and the door must be cut on three sides so that it opens.

Also start gluing matches, pieces of a wooden stack or toothpicks to this blank, moving them to the right, then to the left.

From this strip, make such a box, glue its two opposite walls to make a log house. For a while, also fix this place with a clothespin.

Then, as in the previous case, attach and glue the gables. Please note that one of them is fixed from the side of the door.

Make the third room in the same way, it should be slightly smaller than the first two.

To make a roof, you need to measure the length of the refectory, the altar, the church. Add 4 mm.

Now, according to the marking of each building, cut out the roofs from cardboard, bend these blanks in half.

Glue these roofs onto each of your buildings. Now we need to cover them. To do this, cut the semblance of boards from veneer.

Make a cutout on the central roof, glue this pipe here. Cut the veneer into wider and longer pieces, glue them so that they cover the cardboard roofs.

To make a cross, you can use the following device. On such a bar you need reverse side fill 3 groups of nails. Now start wrapping them with copper wire from above.

Here is the cross.

To make a dome, cut circles. The largest will be 19 mm in diameter, the next 17 mm, 15 mm, 13 mm, 11 mm, 9 mm. The smallest is 5 mm. Glue them like this.

Punch a hole in the center of the round blanks with a nail. Now take a strip of colored foil 10 cm long, put a dome on it, drop glue into the recess, put a cross inside.

Now twist the foil, making the dome in this way.

Cut the foil at the bottom of the dome so that you can glue it later.

From fiberboard, plywood or chipboard, cut out two layers of church bases and glue them together. Glue this blank over so that the surface resembles masonry. Pour glue inside, put the church here and attach it.

It will remain on the made pedestal in the form of a pipe to glue the dome. Here's how to make a matchstick church to look like the real thing.

Sometimes a week of Orthodox culture is held in schools, you need to bring crafts on this topic. If you make such a beautiful blue and white church with your child, he will surely take a prize.

Before you make a church of this kind, you will need to prepare:

• plastic bottle;
• cardboard cover from the box;
• wire;
• rope;
• lace and braid;
• blue and white plasticine;
• cotton wool;
• a strip of roll synthetic winterizer;
• PVA glue;
• foamiran or colored cardboard;
• double sided tape;
• scissors;
• brush;
• white paint.

First, take the lid on which the craft will be located, paint it with white paint. While the drying process is in progress, you will cut strips of cardboard or foamiran. They will help arrange a fence around the temple.

Sharpen the top ends of these strips to make them look like a picket fence.

In the meantime, the white paint on the box has dried, so it's time to glue the planks to the raised edges.

Let the glue dry, in the meantime, take the bottle, cut off the bottom.

You need to take a bottle from which top part reminiscent of the dome of the church, for example, from under the mineral water.

Also cut off the top of this container. But here the plastic is durable, so it is better to heat the knife and gradually cut off the excess part.

Now measure 2 cm from the edge of the bottle and cut this part into strips. Then such a trick will help to fix the church on a horizontal surface.

Cover the top of the bottle with plasticine, making a pointed tip out of it here.

To make a cross, take the wire in the winding. Here it is in blue. First, bend it in half, make a loop here, then bend two more loops on the right and left sides.

Stick the resulting cross into the plasticine dome cap.

Tape the bottom of the bottle with double-sided tape. Now start peeling off the top paper layer gradually. First, remove it from the bottom coil of tape. Wrap here with the yarn of your choice.

Thus, it is necessary to arrange all lower part bottles. Now glue strips of lace here. Above and in the middle they can be blue, and below silver.

Now there is another interesting work to be done, which will also shed light on how to make a church. You need to decorate the dome. To do this, together with the child, roll up balls of blue and blue and make cakes out of them. Start gluing them from below in a checkerboard pattern. The second row should be slightly shifted to the right and the subsequent ones too.

Now attach double-sided tape to the bottom of the cut strips from the plastic bottle and stick it onto the box.

You can cover the horizontal surface of the box with grass, glue trees and flowers made of rubber, plastic or other materials here. But in this case, a white and blue composition, so snowdrifts made of cotton wool would be appropriate. Put them on the box by gluing them. And in the center place a strip of synthetic winterizer. It also needs to be glued. Here's how to make a church look so amazing.

If you are interested in learning how to make a church out of matches, then the following master class will help.

An interesting idea is to make a paper temple using origami art. In just 12 minutes, you will acquire the skill and be able to make a church out of this material.

Hello everyone! Handmade Tuesday on the ShkolaLa blog! Get your golden hands ready. Today we will make a very interesting school craft for the week of Orthodox culture. Do these things happen at your school? We have periodicals) So they asked me to do something suitable.

And we decided to make a church. Long thought from what, but how? Thought and thought and thought. We will make a church out of a plastic bottle. The main thing is to choose the right bottle, so that its upper part looks like the dome of a church in shape. And we found one, from under the mineral water.

Well? Begin?

Let's prepare the necessary materials:

• shoe box lid
• plastic bottle;
• rope;
• wire;
• braid and lace for decoration;
• plasticine (we chose white and blue);
• cardboard or baby foam (aka foamiran);
• cotton wool;
• PVA glue;
• double sided tape;
• white paint;
• brush;
• scissors.

First, let's prepare the base of our craft. Paint the shoebox lid white.

Set the box aside for the paint to dry. And we will prepare planks for the fence that will enclose our church. They can also be cut out of cardboard. We used colored foam for children's creativity (foamiran). Draw stripes and cut them out with scissors.

We sharpened the tips of the boards to give the fence more naturalism. "Plates" are ready.

Now glue them to our base.

And we turn to the design of the main object of our crafts.

Take a bottle and cut off the bottom of it. Approximately like this.

The top of the bottle also needs to be cut off. This is quite problematic, since the plastic at the neck of the bottle is quite hard and thick. We heated the knife over the gas and slowly cut it off.

It's time to take care of how our future church will be attached to the base. Using a marker, I marked a horizontal line on the bottom of the bottle, approximately 2 cm from the edge. And segments were drawn down from this line.

The bottle was cut with scissors along the marked lines and the resulting strips were bent. It looks like flower petals.

Let's take care of the dome of our church. We will supplement it to the desired shape with the help of plasticine.

How to make a cross? Very simple. We took a beautiful decorative blue wire, since our church will be all blue and white. But you can use the usual wire, just then wrap the cross with foil.

Well, we first bent the wire in half and bent its tails to the sides.

And then like this. Got a cross!

Now we stick a cross into the top of our poppy head.

We take double-sided tape and glue the walls of the church with it.

Gradually, starting from the bottom, we take away the top layer of double-sided tape and begin to wrap the walls with a rope.

And so to the very top of the wall, to the beginning of the dome.

We mark the doors and windows on the walls with the help of blue lace. We made a front door. A thin strip of lace was glued on the top, and a silver braid for beauty was glued on the bottom.

The windows were arranged as follows: two on the sides, one behind.

Let's start decorating the dome. We roll up balls from white and blue plasticine, turn them into cakes, and glue them to the dome in rows, starting from the bottom.

Each next circle finds a little on the previous one. Like every top row to the bottom. The higher we climb, the smaller the cakes become. This is how the dome turned out! Nice?

We can say that we built a church.

We will install it on our base.

Remember we cut the bottom of the bottle into petals? Now we glue double-sided tape on these petals from below.

We made the stripes that are on the back of the church a little shorter in order to set the building as close as possible to the base wall. Then we take away the top layer of adhesive tape and glue the building to the base. Holds very tight and won't fall off.

It remains to decorate the space surrounding the church. You can make it summer, glue grass, make trees with your own hands and “plant” them around. But we went the other way, faster and easier. Made winter. Everything around the church was “swept with snow”. They made snowdrifts from cotton wool. And "cleared" the path to the doors. Path from a piece of synthetic winterizer. All this was glued to the base with PVA glue.

So our white and blue church is ready)

Already went to the school exhibition.

Now, friends, you know what to do if a week of Orthodox culture has started at school. We hope our step by step master class will help you)

By the way, I think that our composition for Christmas with angels can also act as a craft on the theme of Orthodox culture. You will find a master class.

And VKontakte is waiting for you our school group! Become her subscriber! We promise a sea of ​​school positive and interesting information!

Enjoy your creativity!

Always yours, Evgenia Klimkovich.

There are several options for creating a church out of paper. Any of them requires a certain skill and perseverance. For example, to glue a temple out of paper with your own hands, it will take a lot of time and effort. This is a rather complex, voluminous work that requires knowledge and skills in working with paper, as well as with scissors and glue.

How to make a church out of paper?

First you need to find a scheme according to which the process will take place. It is advisable not only to find it on the Internet, but to print it. Ideally, if the scheme also has step-by-step instruction. Before proceeding, study it carefully.

Preparing to Establish a Church

Before you actually start cutting anything, you need to free up your workspace by removing all unnecessary things and papers. This must be done to avoid the possibility of losing small parts. Before cutting out the components from the sheet, lightly press all the folds with ballpoint pen with a dried rod, or something similar. The main thing is not to scratch the surface of the paper. Such a simple solution will help make the bends along the line much neater.

Advice

It's a good idea to use a ruler when you fold the paper in straight sections. To create an inner crease, lay the ruler so that it is along the fold line. And then lift the paper, pressing it against the edge of the ruler.

A church made of paper is an excellent decoration, as well as a great gift in which you can put all your warmth, care and love. The first thing to start with is to draw the so-called “building pattern”. It is advisable to do this on thick paper. white color. Next, all the components must be carefully cut. You can find a pattern on the Internet - there are a great many different options. If you have no experience, start with the simpler one. When all the details are successfully cut, bend them along the pre-marked fold lines. Thus, the walls of your church are ready, it remains to carefully glue them to the cardboard platform - the foundation of the church.

Domes are an obligatory element of any temple. So, paper construction needs them too. Their “pattern” can be found on the same drawing as the “patterns” of the walls for the church. Alternatively, you can simply search for it separately on the Internet. It goes without saying that church domes should not be white. It all depends solely on your imagination. So, blanks for domes can be pasted over with yellow or orange paper, or you can use silver and gold foil for this.

Be careful

When gluing white paper to colored paper or foil, you should try to make the whole process as smooth as possible. You shouldn't have any folds. Do everything so as not to accidentally crush the workpiece, because the quality of the domes and appearance the whole structure. When the paper patterns are ready, you will need to carefully cut out the windows in the paper walls. If there is no desire to cut them out, then you can do it easier - draw with pencils or paints. Lastly, all the details are assembled together and glued. It is necessary to smear the seams with glue so that it does not protrude and is not visible, otherwise the church will not look neat.

Paper church gluing sequence

The “patterns” of all the walls will need to be bent along pre-planned lines, then the walls should be glued to the cardboard platform. When all the walls are glued to the site, and the glue dries, you will need to “attach” the domes from above. You can glue them with the same glue that fastened the walls. Alternatively, you can paint the cardboard area with colored pencils or paints, or go even further - glue small pebbles and sand to it, and also, for greater realism, make a fence out of matches or toothpicks. Creating an environment entirely depends on your imagination and capabilities. Any paper craft involves a wide flight of imagination and creativity.

Conclusion:

A paper temple can be a worthy decoration of any interior, as well as a great gift for a friend or loved one. Its creation is a fascinating, but also difficult task that will require accuracy and endurance, as well as perseverance. You need to choose a time when you are not in a hurry to go anywhere, arrange a workplace for yourself, and then, in fact, take on the temple itself.

Origami paper church

paper church

origami church - simple crafts from paper

Crafts from plastic bottles are very simple and easy to do with your own hands. In this article, we will tell you how you can make church models from ordinary plastic bottles.

It is worth noting that many bottles already have a domed shape, which makes it very easy to make models of churches.

As you can see in the photo, the tops of the bottles are used in this composition.

The pictures are printed on self-adhesive paper using a conventional inkjet printer and glued on top of the bottles, sprinkled with glue and glitter. In addition, beads and foil were used in the manufacture of crafts from plastic bottles.

Quite affordable materials for making DIY crafts, right?

And this craft from a plastic bottle is made using papier-mâché technology, this is when the paper is torn into small pieces, the bottle is coated with glue and pasted over with pieces of soft paper in several layers.

After that, homemade crafts can be painted with acrylic paints or gouache.

This plastic bottle mockup is even easier to make. Acrylic paints were used. Gold paint can be bought at the artist's store, but otherwise - all items for crafting are sold at the stationery store.

This installation uses cut windows in plastic bottles, the domes are made of polymer clay, we wrote about it in the article. You can take already a golden color, or you can paint it.

As you can see, there is nothing complicated in making homemade crafts from bottles! This is a very simple activity and you can do it with your child.

More crafts from plastic bottles:

A helicopter from a plastic bottle - we make a model of a helicopter.
Water rocket - we make a rocket on water-air fuel.