DIY Christmas crafts - the best decoration holiday. And what could be more fun than such a fairy-tale hero as a snowman?

Crocheted in skillful hands, you can tie an unusually cute and funny snowman, which can not only decorate festive table, but also become a great gift for loved ones or even a child's favorite toy!

To crochet a toy like a snowman, you need to be patient, with materials, tools and arm yourself with our tips:

• Before you start creating, it would be nice to read a master class or watch a video tutorial on crocheting a snowman.
• Threads are better to buy woolen or cotton. You can use the leftover threads from the previous knitting. One snowman takes 30-50 grams of thread. Crochet hooks are desirable to have different sizes. The hook should always match the thickness of the thread.
• Sometimes you may need knitting needles, for example, for knitting a scarf.
• Beads, buttons, glass beads will be needed for the eyes and eyebrows.
• It is best to knit a snowman according to the scheme, which can be found in master classes or videos.
• If you decide to give your loved ones such a surprise as a snowman knitted, then it can be beautifully decorated with crocheted details.

The process of crocheting a snowman is based on general principle. A snowman always consists of two or three balls, which are his torso and head. If you know how to knit a ball, then you can easily knit a snowman. For beginner needlewomen, a master class or a video lesson on crocheting a ball will be of great help.

We offer you several master classes in which you will find detailed description crochet algorithm for crocheting New Year's snowmen.

Snowman with a scarf - master class

We invite you to knit together with us a funny snowman, which you can hang on the Christmas tree, give to friends or decorate their house.

You will need: red, green and light golden threads, a hook, two balls of different sizes, a needle and thread, PVA glue and a brush, paper, black beads and glass beads.

Step one: tie two balls with golden threads. This will be the body and head of the snowman.

Step two: we firmly connect the torso and head, for which we thread the tip of the thread from the torso blank into the penultimate row of the head blank, tighten it and tie it into a knot.

Step three: knit a red scarf with knitting needles.

Step four: we make a nose out of paper and wrap it with a red thread, attaching it with glue, as shown in the diagram.

Step five: we knit a green hat, and from beads and glass beads we make eyes and eyebrows.

Step six: we attach the nose with a needle and thread and pull a golden lace through the tip of the cap.

Snowman in a hat - master class

For needlewomen who know the technique of crocheting, creating such a snowman according to the scheme will not be difficult.

You will need: white, orange, brown and black woolen threads, hook.

• We knit a ball ( lower part torso), but not to the end, but on 12-18 columns in a row we begin to knit the next smaller ball ( upper part torso). By the same principle, we knit the third ball (head).
• We knit small balls separately - these will be handles.
• We stuff the snowman with padding polyester or cotton wool. For stability, you can put plastic balls or pebbles on the bottom.
• We knit a hat from black threads and a nose from red ones. Then we embroider the mouth and eyes.

Heating pad on a mug - master class

A snowman knitted with thin knitting needles and crocheted as a warmer for a mug is a small, but important detail for comfort in the house.

You will need: blue and white yarn, orange Iris threads, hook No. 1.5, knitting needles, synthetic winterizer and beads.

• First, we knit the head: with a white thread, we collect 20 loops on the knitting needles and knit with the front stitch, adding 10 loops in rows 3 and 5. Having connected the 22nd row, fill the resulting part with a padding polyester. Then in the 23rd, 25th and 27th row add 10 loops again (total there will be 70 loops in the row). On the 120th row close the loops. Run a seam, wrap the edges inward, hem at neck level and tighten slightly.
• We knit a hat: we collect 38 loops and we knit a garter stitch for 32 rows and close the loops. We carry out a seam, we tighten the crown, we make a white pompom and sew.
• We knit a scarf: with blue threads we collect 8 loops and we knit about 100 rows.
• We make a nose: we take an orange thread and crochet 3 air loops, connect them into a ring and knit the first row of 5 tbsp. b / n, 2-8 rows of art. b / n, adding 1 loop. Stuff the nose with padding polyester and sew to the head. Then sew on the beady eyes as shown in the diagram. Crocheted and knitted snowman is ready.

Knitted snowman on a postcard - master class

Even novice craftswomen will be able to knit such a cheerful character, which is great for decorating a New Year's video card or decorating a Christmas tree.

You will need: woolen or cotton threads in red, white, black and orange, a hook, four buttons, two beads and floss threads.

• We knit two mugs different sizes. Beginning needlewomen can find a description of knitting circles in master classes or video lessons.
• We knit a hat, nose and scarf, sew on buttons, make eyes and dimples on the cheeks, embroider a smile and snowflakes with floss threads. Then we sew all the details according to the scheme.

Ideas for creating New Year's snowmen

Shaggy yarn can make a fun fluffy family.

Original potholders in the form of a couple of funny snowmen will decorate your kitchen.

Having studied the master class and video tutorials on crocheting, you can easily knit an athlete snowman.

A cheerful snowman will make a wonderful company, crocheted green tree.

A cute gift will be a mobile phone case decorated with a snowman.

And even a novice craftswoman will knit such a New Year's tack.

A little patience, skill and imagination will help you create unique images of New Year's snowmen. We hope that our workshops and ideas were interesting and informative for you. You can easily peep the missing little things in the video knitting lessons.

is a fascinating knitting process that will delight you at the end with a charming winter handsome man. You can keep it for yourself or give it to one of your colleagues for the New Year. The height of the snowman is 14 cm.

For work you will need:

• Yarn Vita baby Print (100% acrylic; 100g - 400m);
• Yarn Vita baby of blue color(100% acrylic; 100g - 400m);
• Yarn Pekhorka Children's novelty white color(100% acrylic; 50g - 200m);
• Hook 2.0 mm and 1.0 mm.

The first part of the video tutorial on crocheting the head and body of a snowman:

We knit the body and head of the snowman

We knit with white yarn.

• 1 row: in the middle of the loop (ring) we knit six RLS, SS;
• 4th row: *inc, 2 sc* (24 sts);
• 7 row: * addition, 5 sc * (42 p);
• 8-13 row: RLS (42 p);
• 14 row: * decrease, 5 sc * (36 p);
• 15 row: * decrease, 4 sc * (30 p);
• 16 row: * decrease, 3 sc * (24 p);
• 17 row: * decrease, 2 sc * (18 p);
• 18 - 19 row: RLS (18 p);
• 20 row: * addition, 2 sc * (24 p);
• 21 row: * addition, 3SBN * (30 p);
• 22 row: * addition, 4 sc * (36 p);
• 23 row: * addition, 5 sc * (42 p);
• 24 row: * addition, 6 sc * (48p);
• 25 - 39 row: RLS (48 p);
• 40 row: * decrease, 6 sc * (42 p);
• 41 row: * decrease, 5 sc * (36 p);
• 42 row: * decrease, 4 sc * (30 p); Fill the body of the snowman with filler and add more synthetic winterizer as you knit.
• 43 row: * decrease, 3SBN * (24 p);
• 44 row: * decrease, 2 sc * (18 p);
• 45 row: * decrease, 1 RLS * (12 p);
• 46 row: * decrease * until the hole closes. We fix and cut the thread.

The second part of the video tutorial on crocheting a scarf and a snowman hat:

We knit a scarf for a snowman

We collect 60 VP, printed yarn. We knit 2 rows with half-columns with a crochet. We tie the entire scarf with RLS, with a different color of yarn (blue). We cut the yarn, about 7-10 cm long and tie the fringe to the edges. We level with scissors.

We knit a hat for a snowman

Knitted with printed yarn.

• 1 row: Six sc are knitted into the ring, tighten;
• 2 row: from one loop we knit 2 sc (12 p);
• 3 row: * addition, 1 sc * (18 p);
• 4 row: * addition, 2 sc * (24 p);
• 5 row: * addition, 3 sc * (30 p);
• 6 row: * addition, 4 sc * (36 p);
• 7 row: (blue yarn) Sc for the back half loop (36 p);
• 8 - 13 row: (blue yarn) we knit for two half loops of RLS (36 p);
• 14 row: (printed yarn) * increase, 5 sc * knit for the back half loop (42 p);
• 15 row: (printed yarn) * increase, 6 RLS * knit in two half loops (48 p);
• 16 row: (printed yarn) * increase, 7 sc * (52 p).

We tie the edge of the cap with a crusty step, blue yarn. We tighten the thread and cut.

The third part of the video is a master class on crocheting handles in mittens, boots and a carrot nose for a snowman:

We knit a nose-carrot

We knit with orange yarn and crochet 1 mm.

• 1 row: we collect 2 VP, in the second loop we knit 4 sc;
• 2 row: RLS (4 p);
• 3rd row: *inc, 3 sc* (5 sts);
• 4 row: RLS (5 p);
• 5th row: *inc, 4 sc (6 sts).

We knit shoes

We knit with blue yarn.

• 1 row: in the ring we knit six sc. We tighten the ring.
• 2nd row: double the loops, knit 2 sc from one;
• 3 row: * RLS, addition * (18 p);
• 4 row: * 2 sc, increase * (24 p);
• 5 row: * 3 sc, increase * (30 p);
• 6 row: * 3 sc, decrease * (24 p);
• 7 row: * 2 sc, decrease * (18 p);
• 8 row: * 1 sc, decrease * (12 p). We fill one side of the boot with synthetic winterizer, for the stability of the snowman.
• 9 row: * decrease * until the hole closes.

We knit hands in mittens

We knit a mitten with printed yarn.

• 1 row: in the ring we knit 1 VP (it is equal to one RLS) and five RLS. We tighten the ring.
• 2 row: in one loop we knit 2 sc (12 p);
• 3 - 4 row: RLS (12 p);
• 5th row: 5 sc, 1 fluffy column (this will be the thumb), 6 sc;
• 6 row: * 2 sc, decrease * (9 p);
• 7 row: we knit for the front half-loop, in each 2 sc. This will be the lapel of the mittens.

Now we knit a hand with white yarn. We still have the back half loops of the 7th row, in which we begin knitting.

We knit RLS in each back half loop (9 p). Then we knit in a circle, in each loop one sc, a total of 7 rows. Do not forget to fill a mitten with a hand with a padding polyester. And with the last row, close the loops with decreases.

Now it remains only to sew on the nose, hands, buttons. Eyes can be glued or sewn on beads. Sew the boots with the flat side to the bottom of the snowman. Ready!

New Year is a Christmas tree, Santa Claus, Snow Maiden, snow and, of course, a snowman! Where without him on this magical night. You can roll it out of snow, or you can crochet it and decorate your house with it, or even give it to someone as a gift. New Year's souvenir. Today we will talk about how a crochet snowman is made, a master class for beginners will help even beginners to cope with crafts.

To crochet a snowman, we need:

- threads of white, blue and orange;
- hook;
- needle and thread;
- black floss threads;
- sintepon.

How to make a crochet knitted snowman: description and photo

The body of the snowman is knitted without a break. The head and tummy are one piece.
From white threads we collect two air loops.
In the second we knit columns without a crochet. In total, you need to knit six columns and connect with a connecting loop.

We knit the second row with increments. We make six additions.
Third row - twelve additions.
The fourth row - six additions.
And we knit three rows without additions. Each row consists of thirty columns.

By the way, you can not only tie a snowman. It turns out very unusual and beautiful.

Now we need to decrease to start crochet the second snowball for the snowman.
Subtract six columns.
The next row also has six columns.
We have a ball with a hole at the top.

Here we fill this ball with synthetic winterizer.
And we knit further.
Now we need to increase again.
We add six columns first. And again six columns in the next row. We again got thirty columns without a crochet.

We knit three rows, without subtracting or adding.
Now we make cuts.
We make six reductions. And in the next two rows, too, six decreases.
Do not forget to crochet the second ball for a knitted snowman for the New Year.
When there are six loops left, we simply pull them together.
We break the thread and hide it.
The body and head of the crochet snowman are ready.

Let's move on to the handles.
We make two air loops from blue threads and in the second from the hook we knit six single crochets.
In the second row we make two increases and get eight columns.
We knit two rows.
Change the thread to white.
And knit five more rows.
This is how the handle turns out.

We knit the second one in the same way.
We sew handles to the body of a knitted snowman with a hook for the New Year.

From orange threads we knit a nose-carrot.
We make two loops and in the second we knit six columns without a crochet.
In the second row we add four columns.
And knit three or four rows.

Sew nose to head New Year's snowman, crocheted.
From blue threads we knit a scarf and a hat.
We collect an air chain and knit one row with double crochets.
The scarf is ready.
We knit a hat like this:
A chain of twenty-five or thirty air loops you need to close in a ring and knit in a circle with double crochets.
We do not subtract the first row.
And all subsequent ones are reduced by four columns in each row.
It can be more, it can be less.
From above we make a pompom-fringe.
We put it all on a snowman, embroider eyes with black floss.
At the end of the work, you get such a crochet knitted snowman: a master class for beginners and will help you make such a toy.

We also invite you to watch another knitting master class

Winter will come soon and everyone's favorite holiday, New Year. And this is a great reason to tie. For example, tie snowmen to decorate the interior and just as a gift to relatives and friends. And how to do this we will tell further.

Now we present to your attention several options for snowmen. So you can tie these snowmen in berets. A bright accent will be a scarf and a pompom in the same color.

You can make such stylish snowmen in hats - caps. Pastel gamma looks gentle and neat.

The product does not have to be bulky. So you can tie flat snowmen, but at the same time they will not lose their originality and beauty.

Fans of creativity will definitely like the following option. This is a snowman in a hat resembling a deer. This is an interesting option that combines several symbols of the new year and Christmas.

And you can remember the famous cartoon "Frozen Heart" and knit the charming snowman Olav. After all, he fell in love not only with children, but also with adults. We have listed only a small part of the options, but you can come up with your own model.

Snowman knitted pattern

In fact, it is not difficult to tie a snowman. You can do it with crochet and knitting needles. Now we will give both examples, and you will have to choose the most suitable option for yourself.

crochet snowman pattern

Most crochet toys are knitted in the round. Which greatly simplifies the task. You need to start work with the so-called amigurumi ring. The variant is shown in the following figure.

Another such method is called the "magic ring". Actually this is the most the best way By picking up the loops and tightening the thread, you will get a tightly closed circle without a hole in the middle. Next, we knit according to the pattern below.

Each circle must be closed with a connecting column. The number of increments is also easy to remember, in each subsequent row there should be 6 single crochets more than in the previous one. When you get the desired diameter of the circle, it is worth stopping the increase and knitting rows 7. After that, we begin to decrease the loops in the same way as the increases. You should end up like this.

Now we fill the part and close the hole. The head is knitted in the same way, only the number of loops will be less. To finish the snowmen, you will need to tie the arms, nose, legs and of course a hat with a scarf.

Crochet snowman video

To make it clearer, we suggest you watch the video. It tells about crocheting a snowman.

We knit a snowman with knitting needles master class

Knitting a snowman with knitting needles is also not difficult, and it can be made unusual. Braids and arana are very popular, so you can knit a three-dimensional pattern on the body of a snowman.

For work you will need:

• toe knitting needles;
• yarn of white, blue and gray - blue.

Let's start. We collect an equal number of loops on three knitting needles - 16. On the knitting needle where the braid will be knitted, there should be a couple of loops more - 18 (equal to the report of the pattern). We close the circle, for this we collect one more loop and then we knit an extra loop along with the loop of the first knitting needle. Now we continue to work in a circle. On three knitting needles we knit facial loops. Now we have reached the knitting needle on which we will knit the braid according to the following pattern.

We begin to knit a pattern. We purl two loops. Then we remove one loop on a pin and leave it before knitting. We knit the next loop with the front one and return the loop from the pin to the left knitting needle, after which we knit the front one. We knit one loop of the wrong side, after which 8 p. Facial. Then one purl. We remove one front on a pin and leave it for knitting. We knit the next loop with the knit one and return the removed loop to the left knitting needle and knit it with the knit one. It remains to knit two wrong loops. On three knitting needles we knit facial loops.

We knit the next row of the pattern like this:

• two purl;
• two facial;
• one purl;
• eight facial;
• one purl;
• two facial;
• two purl.

Again facial loops on 3 knitting needles.

Third row of pattern:

• two purl;
• we remove one front loop on a pin before knitting, knit the next front loop and return the removed loop to the left knitting needle and knit the front one;
• purl loop;
• remove two loops on a pin before work, knit the next two loops, return the removed loops to the knitting needle and knit them, remove two loops and leave for knitting, knit the following loops. We return the loops from the pin to the knitting needles and knit them with facial ones.
• purl loop;
• remove the front loop at work and knit the next one, return the loop and knit it with the face;
• two purl loops.

Thus, we knit 8 rows of braids (pattern report). When the number of rows becomes equal to 31, it is necessary to move on to decreases. Starting from the 32nd row on the knitting needle with an oblique, we reduce the extreme purl loops by knitting them together. On each next knitting needle, we also knit the extreme loops two together. Thus, the number of loops will decrease by 6. From 33 rows we knit on all knitting needles with facial loops, continuing to decrease. Thus, 54 sts will remain on the knitting needles. We knit 10 rows and proceed to knitting the slope under the cap. To do this, we knit in front, leaving the back of the head. On the front needle we knit all the loops, and on the side we leave a couple last loops. We continue to work decreasing loops until two knitted loops remain on the side knitting needles. Now we take a thread of a different color and knit a hat for the future snowman, alternating rows of front and back loops. Having connected 20 rows, we switch to an elastic band. We knit it by alternating 2 purl and 2 facial loops. We knit another 20 rows and close the loops. It remains to collect the snowman. The bottom can be made by cutting a circle from a dense fabric and sewing it on. Now you need to fill the toy with filler. We make out the face. Sew eyes, nose - carrots. If desired, you can embroider a mouth. The result is such a cute snowman.

Step-by-step instructions for knitting a snowman with knitting needles

Now we will tell you how to knit a cheerful snowman with knitting needles.

For work you will need:

• toe knitting needles 5 pieces;
• white yarn for the body;
• little by little threads of red and orange.

The body and head are knitted in one piece, which makes our task easier. Knitting will go in a circle and it can be done on both four and five knitting needles. Let's get to work:
1. on a knitting needle we collect 18 loops of them on three knitting needles;
2. then we knit increases in 2, 4,6,8 rows, add 6 loops each, odd rows (3,5,7,9) we knit without increases. In other words, after a row with an increase, we knit a simple row.
3. from the 10th to the 39th row we knit with facial loops (the number of loops will be 42);
4. in the 40th row we decrease 6 loops, knitting two together;
5. from 41 to 60 row we knit without reductions;
6. from 61 to 64 rows, we make 6 decreases in each row;
7. as a result, 12 loops will remain on the knitting needles;
8. cut the thread and thread it with a needle into the loops, tighten the hole;
9. stuff the body with sintepuh;
10. at the level of the 40th row, we tighten the body to visually separate the head from the body;

11. now you need to tie your hands for this, we collect six loops on the knitting needles and knit alternating 2 purl and 2 facial loops, after which we fold in half and sew;

12. go to the mittens, we collect 12 loops on the knitting needle and divide them into three knitting needles, from the 1st to the 5th row we alternate a row of facial and purl loops, from the 6th to the 13th rows we knit with the face, from the 14th to the 16th row we subtract 3 loops in each row and we tighten, similarly we knit the second one, it is more convenient to crochet the finger;

13. for the nose, you need to dial 6 loops and distribute them on 3 knitting needles, then knit 5 rows with front stitch, and in the sixth row make three decreases, tighten the remaining loops.

Now it remains to fill the mittens a little and sew them to the hands. Sew the arms under the snowman's head. Now sew on the nose, eyes. You can wear a decorative bucket on your head or tie a hat with a scarf. That's all our positive snowman is ready.

Snowmen knitted patterns with a description

Snowman in a hat with a scarf. For those who own a crochet, it will not be difficult to tie a snowman according to the following pattern. Moreover, the toy is knitted in the round and scarf and hat patterns are also attached. According to the following description, you can easily tie a snowman.

Tack - snowman. A snowman can be not only a toy, but also a useful household item. We suggest you knit a snowman according to this pattern - a tack. Everything is knitted in a circle with single crochets in places marked with two crosses, we make increases. The result is an original accessory.

Snowman toy. You can also tie a snowman - a toy for the Christmas tree. To do this, take two foam balls (of different diameters) and tie them with threads according to the following scheme.

We end the additions in the middle of the ball and begin the decreases in the same order. After that, we knit a scarf from any bright yarn. We tie it and attach the head and body of the snowman to the scarf. You can put a hat on your head and attach a loop. Glue the eyes on the nose. The cover is a snowman. You can surprise a loved one with the following gift. This is a snowman cover. The cover itself is crocheted of blue yarn. Then we knit three flat circles of different diameters and sew them over the cover. After we make the snowman's eyes and nose - a carrot. It will be cute and interesting. Flat circle diagrams can be viewed above when describing the tack.

We knit a small snowman master class with a description

According to the following description, everyone will be able to tie a snowman. It is small in size and can be given as a souvenir to friends and relatives.

Crochet a small snowman for a Christmas tree, a diagram with a description

The Christmas tree can be decorated with small snowmen. White toys will look advantageous against the background of green needles. Knit such a toy from top to bottom.

1. We collect 6 loops and close them in a ring.
2. We make 6 increases, as a result we get 12 loops.
3. In the next two rows we make increases, respectively, we get 18 and 24 loops.
4. We knit three rows without increments.
5. In the next 3 rows we knit decreases and get 18, 12 and 6 loops, respectively (the head is ready).
6. After that, in four rows in a row, we make increases (12, 18, 24, 30 loops).
7. We knit the next four rows without increments.
8. Further in each row we make 6 decreases and we get 24, 18, 12 and 6 loops.
9. We tighten the hole.

Now it remains to attach the nose (you can use the finished one), embroider the hands, mouth and eyes. We make fasteners from a chain of air loops. That's it.

This article tells how to tie a snowman with your own hands. Schemes with descriptions are given. Using the information provided, you can easily tie a snowman as a gift and to decorate your home. Happy knitting.

Such snowman Might be a Christmas surprise christmas toy, keychain. It consists of several parts. If the snowman is made as a keychain, then all parts must be fastened together. To create a form, you can use a synthetic winterizer or other filler. But we will use the capsule from Kinder Surprise as a basis.

Materials and tools:

Yarn 100% acrylic, in 100 grams approximately 200 m. Hook number 3.5 and a thin hook for threading the free ends of the threads. For knitting, you will need two colors of yarn: white and pink.

You can choose the second color of your choice. A capsule for creating a shape, scissors, beads or half beads for the eyes.

Abbreviations used in the text:

VP - air loop;

runway - air lifting loop;

CCH - double crochet;

US - double column;

RLS - single crochet.

Beautiful knitted snowman. Master Class

We start knitting the product from the center. We carry out the Amigurumi ring. It was invented by Japanese knitters for small knitted amigurumi toys. We call it a sliding or magic ring: we lay the white thread so that the end of the thread is in the palm of your hand, and wrap the working thread around the index finger (away from you), insert the hook into the ring formed, pick up the working thread and, pulling the loop into the ring, knit air loop. The ring is fixed and work can begin.

1 row. We knit 6 sc on the ring.

We close the row of columns with a connecting loop in 1 single crochet. Tighten the ring by pulling on the free end.

2 row. 1 runway. In each loop of the previous row we knit 2 sc. We close the row in the first runway. There should be 12 stitches in the row.

3 row. 1 runway. ** 2 sc in one loop of the previous row (that is, a double column), 1 sc **. Repeat until the end of the row. There should be 18 stitches in the row. We close the row in the first runway.

4 row. 1 runway. We knit the whole row without additions with single crochets. We close the row with a connecting loop.

5, 6, 7, 8 rows knit similarly to the fourth.

If you knit with thinner yarn, the number of loops in a row can be increased to 24. And knit as many rows along the height of the “head” to reach the place of the capsule connector.

We cut the thread and fasten it with a thinner hook or needle, if it is more convenient for you.

We knit the lower part of the snowman in the same way as the upper one, only 6 rows, not 8.

The body of the snowman is ready and you can draw a face. At the level between the sixth and seventh rows of the “head”, we attach bead eyes. Can be glued with Moment glue, but I prefer to sew on, because. The glue leaves traces, no matter how carefully you stick it. I marked the smile with Chamomile yarn.

We start knitting a hat. We make an amigurumi ring with pink yarn and fix it with one air loop.

1 row. We knit 4 sc.

We close the row with a connecting loop, tightening the ring tightly.

2 row. 1 runway, US, 1 RLS, US, 1 RLS. We close the row with a connecting loop. It turned out 6 sc.

3 row. 1 runway. US, 1 RLS, US, 1 RLS, US, 1 RLS. We close the row with a connecting loop. It turned out 9 sc.

4 row. 1 runway, ** US, 1 RLS, 1 RLS **. They closed the row with a connecting loop. There are 12 sc in a row.

5 row. 1 runway, ** US, 1 RLS ** repeat to the end of the row. We close the row with a connecting loop. There are 18 sc in the row.

6, 7, 8, knit rows of 18 sc. The thread is cut and fastened.

9 row. We introduce a white thread. We knit single crochets behind the back wall of the loop.

10 row. We knit with ordinary single crochets for both walls of the loop.

11 row. We knit CCH for the rib from the front walls of the loops of the last pink row. Insert the hook from below.

12 row. They tied the white edge of the cap.

But the edge consists of two parts: the lower part of the RLS, and the upper part of the SSN.

Both of these layers need to be connected. We knit a row of connecting loops, introducing a hook under both parts of the loops of the upper and lower rows.

It remains to knit one more detail - a scarf. To do this, we will dial 60 VP and knit with two rows of single crochets. We cut the thread and thread it with a thin hook. Tied up all the details. It remains to collect the snowman.

The cap can be decorated with a tassel or pompon.

New Year's souvenir is ready!

The master class was prepared by Svetlana Chalkina.

Beautiful crocheted snowman for the New Year. Master Class

Probably, many Santa Clauses and Snow Maidens have already been prepared for the New Year. It's time to complement them with a festive snowman. It can be crocheted with your own hands. Crocheted snowman for the New Year will be a great gift.

• Yarn (red, white, gray, orange);
• Hook;
• Needle;
• Sintepon;
• Button.

Crocheted snowman - master class

We begin to knit the most basic detail - the body. In a sliding loop we knit six columns without a crochet. And we knit five more rows with increments. In each row, we must knit six increments. And we get thirty-six columns. We knit four rows. After that, four more rows with four decreases in each of these rows. And in the next we will do six reductions.

We turn to knitting the second ball. To do this, in three rows we make six increments. We knit four rows. In the next three rows we will have four decreases. And two to six. Next, we make decreases in each loop until the hole is tightened.

Let's tie the legs. We take gray yarn for this. We knit six columns into the amigurumi ring and add six more columns each in the next two rows. After that, in two rows we make four decreases.

Let's start with the middle ground. This point will allow you to symmetrically place the hands and the carrot nose. On the 11th row, we outline a small dot anywhere. We retreat 7 loops to the right side and knit with a blue thread: 3 loops from the bottom-2 loops up-3 loops to the left-2 loops down. The result is a miniature circle. We knit another row of columns without a crochet and close the loops, pulling them together. By the same principle, we make the second hand. Only from the middle we retreat to the left.

Nose making

On the 16th row at the midpoint (just draw a straight line up from the 11th row), we knit with an orange thread, as in the case of hands, 1 loop-1 loop up -1 loop to the left and 1 loop down. On the second row, we knit with single crochets from 4 loops to three. On the next row, from 3 loops we make one and close, pulling the thread and hiding. The nose is ready.

We draw acrylic paints smile. Glue the eyes onto the hot glue. We tie a scarf. Cheerful ready!

New Year's crafts. Crocheted snowman. Master class with step by step photos

I present to your court a craft -. Purpose of the product: toy, didactic manual, a toy for the theater, a detail for decorating the interior for the holiday. Purpose: to make a toy with your own hands.

Necessary materials and equipment for:

• threads white and pink, yellow, red
• hook 2.5
• bead eyes
• lollipop sticks
• homemade broom made of brown thread
• scissors
• threads
• needle

Crochet a snowman tutorial.

We collect 4 air loops, close in a ring, knit with a double crochet in each loop. We continue to knit with a column with 1 crochet in each loop for 2 columns with 1 crochet. We knit 3 cm. After that, we begin to decrease, we knit through 1 loop 1 cm with 1 yarn.

It turns out a ball. We put pieces of cotton wool inside. This is the torso. We knit the head in the same way, only we collect 3 air loops, we close it in a ring, we knit with a double crochet in each loop. Next, add in each loop. We knit 2 cm - it turns out the head.

We embroider a smile and sew on bead eyes.

Panicle. Q-tip wrap with brown thread, glue 3 cm threads. crochet snowman ready.

Knitted snowman crochet for the New Year. Master class with step by step photos

Hello. In this tutorial, I want to show you how to crochet a funny snowman. It is very simple to perform, even a beginner knitter can handle it. So let's go!

6-10 rows: no change.
11 row: * 3 sc, decrease *. Repeat * 6 times.
12 row: * 2 sc, decrease *. Repeat * 6 times. Fill with filler.
13 row: *increase, 2 sbn*. Repeat * 6 times.
14 row: *increase, 3 sbn*. Repeat * 6 times.
15 row: no change.
16 row: *increase, 4 sbn*. Repeat * 6 times.
17 row: no change.
18 row: *increase, 5 sbn*. Repeat * 6 times.
19-29 rows: no change.
Break the thread, fasten off.

Base.

Row 1: Cast on 2 ch and work 6 sbn in the second loop from the hook.
2 row: *increase*. Repeat * 6 times.
3 row: *increase, 1 sbn*. Repeat * 6 times.
4 row: *increase, 2 sbn*. Repeat * 6 times.
5 row: *increase, 3 sbn*. Repeat * 6 times.
6 row: *increase, 4 sbn*. Repeat * 6 times.
7 row: *increase, 5 sbn*. Repeat * 6 times.
Leave a long thread for sewing to the body.

We knit in rows only for the back loop, not forgetting to make 1 lifting loop in each row.
First color: ch 15
1 row: starting from the second loop from the hook, we knit 14 sc (14)
2nd row: 14 sc
Second color:
3-4 rows: 14 sc
First color - 5-6 rows: 14 sc
so repeat until the 38th row inclusive. You can do a little more if you suddenly don’t fit a snowman on your head.
39 row: 14 sbn, 40th next, connect the edges of the cap, knitting in only one loop. Leave long end thread, pull it over the top edge and tighten.
Ribbon for a hat: ch 30

We knit only for the back wall of the loop. Second color: ch 61, turn starting from the second loop 60 sc, turn 60 more

Carrot nose.

Hook No. 1, cotton (knit from the base to the tip): 2 ch, 6 sbn, 1 row - increase 6 times (12), 2-6 - 12 sbn (12), 7 row - (sbn, decrease) * 4 times. Fasten the thread and hide the tail. Stuff the head and body of the snowman with padding polyester and sew the base.

Here's the one I got. Happy knitting!

Me with the snowman.

You can simply make a snowman with your own hands, or you can knit such a young lady with a slight touch of glamor and shocking. Not all snowmen should be with a bucket and a broom.

I knitted sequins, threads and my soul flew to heaven.

For such a snowman girl you will need:
Threads: acrylic white and blue.

A little red thread for the nose, black floss for the eyes and mouth, sequin ribbon for decoration. Holofiber for filling.

Tools:
Knitting needles No. 2, 1.8, sewing needle.
Now more about how to knit a snowman with knitting needles.

We make an increase from the lower loop of the previous row.
Decrease - 2 loops together front.
All loops are facial, except for the handbag.

Torso.
white thread
1 row - dial 6 loops