Japanese floral wire is better suited - it is perfectly even and already wrapped in paper. If a special wire is not available, you can take a soft copper wire- from old transformer coils, electrical cords and multi-core cables. In this case, you first have to learn how to quickly and accurately wrap the wire around the stems with paper.

How to wrap wire with paper

Cut the paper into strips 3-4 mm wide across the folds (at right angles to the roll). Cut the wire into pieces of 10-15 cm, it is inconvenient to work with longer pieces. Apply a little glue to the beginning of the strip and a few more places. With one hand, press the paper against the wire and rotate it with your thumb and forefinger. With your other hand, straighten and guide the strip of paper at a 45 degree angle to the wire. The paper should wrap around the wire in a tight spiral. After the paper has adhered to the wire, run over the finished part with your fingers dipped in glue.

Take a piece of wire 5-6 cm long. Dip the tip of the wire in glue and form a bump in the shape of a drop.

Lubricate the resulting bud with glue. While the bud is not dry, tint it with pink watercolor. Cut a strip of green paper into cloves, grease with glue and wrap around the bud - these will be the sepals.

Cut a strip of white paper 4 cm wide and cut the fringe.

Twist the fringe strips with your fingers. On a wire 8-10 cm long, make a small hook. Hook the edge of the fringed strip with a hook and wind it onto the wire, lubricating with glue. Cut them to a length of 12-15 mm. Dip the ends in glue and yellow semolina.

petals

strip of paper white color about 4 cm wide, fold with an accordion in 12 layers (fold width - about 12 mm). Cut out the petals. Petals can be tinted with small oil pastels or watercolors. If you chose watercolor, then lay out a strip of paper before cutting out the petals, on the newspaper. Moisten the paper with water first to create a smooth transition from colored to uncolored areas, and then gently touch up the ends of the petals. Dry the paper on newspaper.

Sew the petal blank in the center with a double thread and pull it off. Wrap around the wire with stamens (lubricate this place with glue) and tie. The side with five petals should face up. Spread the upper tier of petals first with your fingers, and then the lower one. Gently stretch the middle of the petal, giving it a convex shape.

The leaves are made from double paper. Gently grease a piece of paper with a glue stick, put a wire in its middle and cover with another piece of paper. When the paper is dry, cut out the leaf according to the template.

Twig Assembly

Take one, two or three flowers, a few buds and a couple of leaves. Tie the details of the branch tightly with a two-fold thread, always in two places, at a distance of 2-3 cm from each other. Spread with glue and wrap with a strip of brown paper, you can in several layers. Lubricate each layer with glue.

We will create such a branch of an apple tree in this master class, which can be used to decorate a hairstyle by attaching it to a comb, headband or hairpin, brooch, boutonniere, or use it in any composition.

How to make apple flowers from foamiran with your own hands?

To make apple flowers, you will need the following materials:

• white, olive, green extra Iranian foamiran;
• glue second;
• scissors;
• wire No. 28-30 and 1.2 mm;
• foil;
• red, yellow acrylic paint;
• pink dry pastel and wet wipe;
• green, olive, salad oil pastel;
• green and brown teip tape;
• rose leaf mold;
• Mold Cattleya.

Pattern and patterns of apple flowers

According to the pattern, we cut out 4 five-petal circles for flowers and 3 three-petal circles for buds for the inflorescence of the apple tree.

From white extra foamiran we cut petal circles for flowers with a diameter of 5 cm. And for buds with a diameter of 3.5 cm and a strip 1.5 cm wide.

From different shades of green foamiran we cut out leaves for an apple tree. Cut out 24 leaves of different sizes.

From different shades of light green foamiran we cut out sepals for flowers and buds.

From a white strip 1.5 cm wide, cut a small fringe for the stamens of flowers.

Step-by-step photo of making flowers and apple twigs (MK)

At the beginning, we cut out cloves on the leaves and then process the leaves on an iron at a silk-wool temperature and squeeze the rose leaf well on the mold.

We heat the sepals on an iron at a silk-wool temperature and grind between the fingers.

We rub the fringe between the fingers.

We process the petals on an iron at a temperature of wool-silk and separately press each petal on a Cattleya mold.

We tint all the petals with pink dry pastel, applying a gentle pink shade on all petals in different ways and in the middle of the petal with light green and yellow pastels.

We take small scissors and cut out the legs of the petals in the middle.

We heat silk-wool on an iron at a temperature and process each petal and the middle of the petal circles with a bulk.

We take olive and green oil pastels and apply tinting along the edges of the leaves.

We take the wire No. 28-26 and cut 8-10 cm and glue the lithons to the wrong side of the leaves.

We take the foil in pieces of 5 * 5 cm and form balls for the base of the apple buds. Glue the foil balls onto the wire.

We take three-petal circles and glue the base, the petal slightly overlaps the other.

So we form three buds.

Apply glue to the stem of the petals and clamp with tweezers.

We take a wire of 6-8 cm, make a loop and wind and glue the chopped fringe, forming the stamens of an apple tree flower.

Glue petal circles onto the formed stamens, slightly lifting and pressing the petals.

We take yellow acrylic paint and apply it to the ends of the fringe.

The month of May is outside, and everything is blooming around: cherries, peaches, apricots and apple trees! But this beauty, unfortunately, is not eternal, in a few days the color will fly around and will no longer please us with its beauty until next spring. Let's extend the spring in our house!

How? We Let's make a blossoming branch of an apple tree out of paper!

You will need: cut branches of a tree or bush, paper, glue, scissors and a detailed Master Class 🙂

We make such a branch of an apple tree:

Also prepare a pot or glass and filler to plant our blossoming paper apple tree. It can be pebbles or small pebbles, etc.)

Plant twigs into a pot, cut corrugated paper as below:



Glue step by step flowers:



Another detailed master class:



Do blossoming paper apple tree you can also like this:



Required for work colored paper, glue, scissors, simple pencil. As branches, you can use wire or dry thin branches of mountain ash or birch.

Approximately it should look like this:



We cut brown or green paper into narrow strips, and having previously lubricated the branch with glue, we wrap it until it is completely covered with a paper layer. Let the glue dry.

On light paper, on white, we mark individual leaves. Cut them out carefully with scissors. We form flowers, and attach them to the glue to the branches. You can use a glue gun.

I also really like pink shades, but in the classic version, these are white flowers.

This is what the markup looks like:



And here is an example of how you can use glue from a thermal gun:



Spring is outside. In the coming month, they will delight with the fragrant flowering of apple trees, if you look closely, they bloom white and with a red tint. And during needlework, a beautiful flowering twig can be made different colors from soft paper. Process dry natural branches in potassium permanganate and varnish. Then cut out the petals from the crepe paper. different sizes and combine into a flower, and stick to a dried twig. Cut and shaped leaves on a flowering apple tree will add beauty in a relief form. It remains to combine the blanks and put in a vase.



To make a beautiful flowering branch of an apple tree, we need white and green paper, wire with a fishing line, tree branches for the composition, PVA glue, scissors with a needle, a pencil, two templates (like these):





First, using a template, draw and cut out apple flowers from white paper.



We fold the white flowers several times like this:



from wire and fishing line we make twigs like this:





It is necessary to make a hole in the flowers and leaves so that the stem can be inserted into the core.





Now you need a wire with a fishing line as a stem, on which you first string flowers, then leaves, pre-lubricating with glue so that the flower does not stagger.



Fasten the finished flower to the branch, and so do all the other branches. Attach the blanks to real twigs.



Apple blossom branch is ready!



Nice idea! What could be more beautiful than a blooming apple tree? Well, maybe a peach blossom).

I would make a paper apple tree, but using dry natural twigs, let's say so. We will not touch the branches, but we will work with paper.

It is necessary to choose paper that is as close as possible in color to the natural flowers of a flowering apple tree. It can be pink leaf, fuchsia, salmon, white, of course, will also work.



Cut out paper blanks. We will need to make a lot of small flowers. They can be drawn on paper with a simple pencil and then cut out with scissors.

We are now working with flowers. We will attach them to branches. But it will be possible to fasten with the help of adhesive tape, thinly sliced. And you can also use glue. Hot glue works great for this purpose.

It will turn out a very beautiful, flowering apple tree.

A flowering branch of an apple tree will be an excellent decor in your home and will carry a spring mood at any time of the year. We will need it. Twigs, glue, paper, scissors, a pencil, a figured hole punch flower. We glue the flowers on the twig and draw the middle. Cut out the leaves with glue to the twig too.



Very beautiful apple flowers, can be made from crepe paper. To do this, we need to make the middle for the flower, for this, make the stamens sprinkled, you can use corn grits or semolina. Then, we cut out the flower petals from crepe paper, draw a shade with pencils a little, and you can create a flower.

Detailed steps for the work of such an apple tree flower can be seen in the photo, all the steps can be repeated by yourself, and you will get a wonderful flowering apple tree twig. Separately, you can make the leaves of the tree. And then all the flowers and leaves can be fixed on a regular branch, and we get a branch of a flowering apple tree.

In spring, beautiful white and pale pink flowers appear on apple trees. At this time, the gardens are filled with wonderful aroma, comfort and beauty. Unfortunately, fruitful trees fade quickly enough, but I really want to have a reminder of the beautiful spring days. It would be a great idea to make a sprig of apple blossoms from such a plastic material as foamiran. Foam flowers keep their shape perfectly and look very natural.

Before you start making apple blossoms, you need to prepare templates. Of course, professionals can cut elements right size immediately from foamiran, relying only on their own eye, but for a beginner who makes such a craft for the first time, it is better not to risk it.

Do not be too lazy to make high-quality and durable templates, they can be useful to you when creating other products, for example, apple flowers and sakura flowers are very similar in structure.

On a real inflorescence of an apple tree, the buds open unevenly, that is, to make the composition realistic, you need to make not only blooming flowers, but also buds.

Master class for making templates for apple blossom:

1. For buds and half-blown flowers, you will need two petal templates. Petal bigger size is a plump round drop with a height of 2 cm, and a width of 2.5 cm. The smaller petal has more elongated shape droplets, it is 1.5 cm long and wide.
2. Blooming buds also have one type of petals. In shape, it resembles a droplet. Its first petal is 4 cm high and 2.5 cm wide.
3. In addition to the petal templates, you should have leaf and sepal layouts. The leaves are 5x3 cm in size. The sepals resemble a four-pointed star with rounded edges in shape. The smaller sepal template has a radius of 2 cm, and the larger one has a radius of 3 cm.

These are, perhaps, all the necessary templates for your craft. One branch consists of two closed buds, one or two fully ripened flowers and three or four half-blown ones. For this design, you will need 8 tiny petals, 25 medium and 5 large, as well as 4 leaves, 5 medium sepals and two small ones.

Apple blossom from foamiran: processing blanks

To make the apple blossom look realistic and believable, before collecting a branch, each element must be processed separately. Fortunately, foamiran is very plastic when heated and keeps its shape perfectly after it has cooled completely. The leaves of the apple tree are quite small, so it can take a lot of time to give them volume.

We process blanks for apple flowers:

1. Take pre-cut petals from white foamiran and tint from the edge with a dry bed Pink colour. Some petals may not be painted.
2. Attach medium and large petals to the iron, and twist into a tourniquet. Unroll the petals after they have completely cooled.
3. Just hold the tiny petals by the iron until they themselves bend into a boat.
4. In the best case, the leaves need to be heated on an iron and pressed against the mold, but if you don’t have such a tool, corrugated paper put in a tablespoon will do.
5. The sepals are applied to the sole of the iron, and stay on it until each of their rays takes on a convex shape.
6. In addition to the petals and leaves, you also need to prepare the stamens. To do this, wrap the ring and middle fingers 6 times with white threads, remove them from the fingers and cut in half. Fix the resulting bundle in a wire bent in half by twisting it upper part. Spray future stamens with hairspray, dip your finger in PVA glue and press it between the stamens. Lubricate the ends of the threads with glue and dip them in semolina. After the glue has dried, color the semolina in yellow. Make five of these blanks.

When processing foamiran elements, make sure that it does not melt upon contact with the iron. Instead of an iron, you can use a curling iron or a wood burning machine set to the lowest temperature.

Master class: apple tree from foamiran, collect a twig

When all the elements are prepared, you can proceed to the most important stage - the assembly of individual flowers into one composition. You will need green wire and brown floral tape. These materials can be purchased at a flower shop.

If you do not have a suitable wire, then it can be replaced corrugated paper Green colour.

In addition to the blanks and materials listed above, you also need to prepare a glue gun, it is best suited for attaching the petals to the wire.

We collect a branch of an apple tree from blanks:

1. In order to make a blooming flower, you will need 5 large petals. They need to be glued to the wire immediately below the stamens made earlier so that the lower parts of each petal are in contact with each other. Glue a larger sepal under the petals.
2. Half-blown buds are collected from five small petals. Five tiny petals are glued to the base with stamens in a circle with a slight overlap on each other. A large sepal is glued from below. Make four of these flowers.
3. Now it remains to make two closed buds. To do this, stick on the cotton part ear stick four medium-sized petals so that the cotton base is hidden behind them. Cut the stick just below the petals and transplant them onto the wire. Attach a sepal from below, make two such buds.
4. Wrap the wire of each element with green or brown floral tape.
5. Take the first closed bud and attach two leaves on the sides of it with floral tape, place one half-opened bud next to the right leaf. At the same level, on the other hand, wind another stem with the same flower. Under them, attach a ripe flower and leaf. Next comes a closed bud, and at the last level there are two flowers and a leaf.

You should end up with a small branch of an apple tree. You can adjust the curves of her flowers with a wire.

Crafts with an apple tree from foamiran

From artificial inflorescences of an apple-tree you can make a gentle graceful wreath. To do this, you need to attach one flower, bud and leaf to each wire. Then weave all the manufactured elements into a circle that matches the diameter of your head.

A wreath of apple blossoms can be additionally decorated with beads or rhinestones.

You can also make a hairpin out of these flowers by attaching a foamiran branch to a crab or a latch design. Apple flowers are very similar to sakura, so if you take not white, but pink foamiran for manufacturing, they are quite suitable for creating a Japanese-style painting.

We make apple flowers from foamiran (video)

Making flowering branches of fruitful trees is a rather laborious and long process, but an excellent result will more than pay for the time spent.

A flowering branch of an apple tree looks very beautiful, but, unfortunately, it fades very quickly. From white and green foamiran, you can make a flowering twig very similar to a real one, which, moreover, will not fade.

Apple flowers from foamiran - master class

To make apple blossom from foamiran, we need:

• foamiran white and green;
• white threads;
• yellow acrylic paint;
• transparent glue-moment "Crystal";
• PVA glue;
• scissors;
• pink pastel;
• floral wire;
• paper;
• foil;
• green tape.

Operating procedure

1. Let's make a pattern for an apple branch. We will need a petal for a flower, a petal for a bud, sepals and two leaves - large and small.



Foamiran apple flower template

2. From white foamiran we will cut out 15 petals for flowers and 10 petals for buds.


3. From the green foamiran we cut out three large leaves, two small leaves and five parts of the sepals.


4. The edges of the petals are tinted with pink pastel.


5. Each petal is twisted into a small tube.


6. Straighten the petals, giving them a convex shape.


7. Now you need to make stamens for the flowers. Take three pieces of white thread about 30 cm long each. Lubricate the threads with PVA glue and let dry. After that, each piece of thread must be wound into a small skein. To do this, you can freely wrap your finger with a thread, and then remove it - you get a small hank.


8. We tie each hank in the middle with a thread and cut the ends. We will get three small bunches of threads.


9. We tint the ends of the beams with yellow acrylic paint.


10. Take three pieces of wire. We fold each piece of wire in half, put the stamens into the loops formed and twist the ends of the wire. Glue the stamens with drops of glue.


11. Let's make flowers. To do this, glue five petals around each bunch of stamens.


12. Take two pieces of wire different lengths. We make a loop at one end of each segment and wrap it with foil to make the bases for the buds.


13. We glue each base for the bud with five small petals so that the foil hides under them.


14. Gather the details of the sepals together and twist.


15. Let's straighten the details of the sepals.


16. We will make a hole in each detail of the sepals. We put the sepals on the wire and glue them to the flowers and buds.


17. Roll the leaves into small tight tubes.
18. Photo18
19. Straighten the leaves, giving them a voluminous shape.


20. We wrap the wire with teip tape, fixing a leaf near each flower and bud.


21. We will collect a sprig from flowers and buds, wrapping flowers and buds with a teip tape to the longest stem.

Our master class on making apple blossom from foamiran is over. A flowering branch of an apple tree is ready. It can be turned into a brooch by attaching a pin or a special brooch holder to it. Such a branch will also make an excellent hair decoration if you stick it to a hoop or hairpin. You can also make from foamiran