You can download 3 patterns of sheath dresses of different models. One pattern is built with a long sleeve, two - on the straps. There are a lot of darts in the dresses, which will allow you to simply “put” them on almost any figure.

I don't like the name "case". It emanates from him, as well as from the "hourglass", marketing of the lowest kind, clinging to human sexuality. Instead of a “case”, you can simply say - a dress that is fitted and not cut off at the waist. This is not like a “collar”, “cascade” or “godet”, where there is a clear visual similarity or the name of a cut detail, here a direct hint at 90-60-90 ... Case ... I only remember Chekhov.

Well, let there be a sheath dress. Dresses with straps will not be disassembled. You can read the instructions for them at the long dress pattern. A slight difference in length and processing will not be an obstacle.

Dress cutting sheath, lining, additional details

For the model, you can choose the fabrics from which the sheath dress is usually sewn.

For lining the dress, use the back, front and side without facing areas of the neckline and cut allowances, shortening by 2 cm.

On your own, add 1.5 cm to the middle seam of the back, 1 cm to the remaining seams, 3 cm to the hem of the bottom of the sleeve, 4 cm to the hem of the bottom of the dress, 2 cm to the hem of the bottom of the lining.

Before sewing the facing of the neckline of the dress, duplicate it with adhesive interlining. To cut the gasket, a facing pattern without allowances is used.

Instructions for sewing a dress with a sleeve

Trim seam allowances from the right flank and right front of the dress, leaving a 1cm seam allowance.

Transfer the lines of tucks from the patterns to the dress. Sweep, grind and iron the darts at the waist of the front and back of the dress, iron the allowances to the middle, iron the chest darts in front down.

Stitch the middle seam of the back of the dress from the bottom to the place where the zipper is sewn in, the patterns are built without a zipper mark, buy it 55 cm long, overcast and iron the seam allowances. Sew the zipper into the middle seam of the back.

Transfer control marks to the reliefs. Stitch the relief seams of the front and back of the dress, combining the control marks, overcast and iron to the middle.

Stitch the shoulder seams of the dress.

Transfer control marks from the pattern to the sleeve and armholes. Overcast the cuts and the bottom of the sleeve of the dress. Connect on a sewing machine and iron the seam of the sleeve. Sew the sleeve into the armhole of the dress, combining the marks on the pattern, iron.

Bend the hem of the bottom of the front and the allowance of the cut to the wrong side, stitch the corner of the joint diagonally, cut off the excess fabric up to 1 cm, turn it inside out and iron it, stitch the corner of the joint on the left side of the front in the same way. Iron the hem of the bottom of the dress and the allowances of the cut on the wrong side, overcast and hem with blind stitches, also hem the bottom of the sleeves.

Connect the details of the lining in the same way as the dress and process the bottom to the hem.

Stitch the lining to the bottom edge of the neckline and iron the seam onto the lining. Fold the lining, combined with the facing of the neckline, with the front sides inward, turn the neckline, notch the allowances, iron on the facing and topstitch. Insert the lining into the dress, tuck the edges of the armholes of the lining and sew with blind stitches to the allowances of the armholes.

On our site you can also download a narrow sleeveless.

Finishing sewing operations

Fold over the open seams of the middle seam of the back lining and neckline and sew to the zipper with blind stitches. Notch the lining allowances at the upper end of the cut in the left relief seam of the front, tuck the sections and sew with blind stitches to the allowance cuts.

Sew on a hook and make a thread loop.

Bust, cm

Waist, cm

Hip circumference, cm

Bust, cm

Waist, cm

Hardworking - a bright light burns through life, lazy - a dim candle

Straps for dresses and tops - do it yourself

visibility 37882 views

In this article I will tell you how to sew and properly sew straps to clothes. You will also learn how to make adjustable straps - ones that can be lengthened and shortened.

So, let's start with a simple regular strap ...

How to sew a strap.

Firstly, I’ll make a reservation right away that if it’s not important for you that the straps are exactly from the same fabric as the dress itself, then straps can be made very quickly from bias tape(sold in the fabric departments of stores or in the departments of sewing accessories).

The oblique inlay looks like a half-finished strap, that is, a flat strip of fabric with edges bent inward (Fig. 3 in the diagram below). So you just save time, you don’t have to cut a long strip, bend and iron its edges.

But if this option does not suit you, or you have not found a bias tape in the size you need, then we will try to make it ourselves. Here's how it's done

We take a strip of fabric of the required length. The width of the strip should be 4 times wider than the future strap (Fig. 1).

We bend the edges of the strip inward to the middle (Fig. 2, 3) so that the bend is kept smooth with an iron. So it turned out oblique inlay. This is what it looks like in the store. The same edging can be used to process the armholes and the neck of the dress.

Now, in order for the edging to become a strap, it is necessary to fold it in half again, edge to edge (Fig. 4) and stitch it (Fig. 5).

That's it - the strap is ready, you can sew it to the dress. We fasten one end of the strap in front, and the other in the back.

How to sew a strap on a dress.

First way. You can just sew on with stitches tightly. Hide the ends of the straps over the edge of the dress and sew on stronger - such a simple rough way.

The second way. It is possible to sew on beautiful decorative rings in the places of the future attachment of the straps to the dress and put the strap into them and fasten them. Here's what I mean:

Now on sale are many decorative rings and buckles studded with rhinestones. And a strap with such a ring will become more elegant.

First you need to sew a piece of the strap in the place we need (where the strap will be attached to the dress). And attach a ring to this piece (Fig. 1, 2, 3). And then we put the end of our long strap into the sewn ring, bend this end and sew it to the strap (Fig. 4, 5, 6).

And you can buy several rings, cut the strap into pieces and connect each ring with each other with a piece of strap (Fig. 7).

The third way - you can sew on a strap (when it is still in the edging stage) in such a way that the piping processes the neck and smoothly turns into a strap. Here's what I mean:

Process the armholes separately with an oblique trim (Fig. 2).

And then we take our oblique inlay of such a length that it is enough to process the neck and make 2 straps. We find the middle on this segment of the oblique inlay and apply this middle to the center of the neck.

And now leading a slanting inlay from the center of the neck, we begin to process it (the neck) with this oblique inlay first to the left side - the inlay goes to the left along the neck (processes it) reaches the left edge of the neck and there it already turns into a strap (that is, the oblique inlay sashes are sewn together with the same line, which we just neck was scribbled). And the same is now on the right side.

That's it, the inlay processing the neck to the right and left of the neck smoothly turned into a strap - Fig. 3.

It is possible on the contrary - the neck was processed with a separate piece of inlay, and the inlay that was used to process the armhole smoothly passes to the strap. How do you feel more beautiful.

How to process the edges of armholes and necklines with a trim is shown and described in the diagram below:

The shoulder strap is adjustable.

If we want the strap to be shortened or lengthened according to our desire, we can make an adjustable strap, like in bras.

We need a buckle with a jumper (Fig. 1), a ring (Fig. 2) and a finished shoulder strap with a margin of length (Fig. 3).

The end of the strap must be pulled into the buckle so that it simply bends over the jumper and returns to the strap, to which it must be attached after that (Fig. 4, 5, 6).

Now, on the back, in the place you have planned, we attach a piece of the strap (Fig. 7), into which we thread the ring (Fig. 8, 9), fasten it well with several lines (Fig. 10).

Now we thread the end of the strap (the one without the buckle) into the ring, and we stretch it into the buckle (Fig. 11, 12). All the strap is ready - we attach this free end that came out of the buckle to the front of the dress. You can just sew it on, or you can also attach a ring in front and fasten our end of the strap on this ring.

Now in stores you can buy ready-made adjustable straps - however, their color is limited, and as a rule, they are all narrow. More often they are just black and white, there are transparent, and there are also studded with stars, with buckles in the form of butterflies or flowers.

There are also a lot of beautiful ribbons, decorative buckles on sale - and from all this variety you can come up with many interesting straps yourself, which will decorate a simply tailored dress.

You just need to remember the sense of proportion. If your dress already has a decorative element (bow, intricate drapery, intricately sewn frills), then an additional decor in the form of jewelry on the straps will be superfluous.

That, perhaps, is all that I wanted to tell you about the straps. All questions, wishes and advice from you, dear readers, I will be glad to see in the comments to the article. You can also place photos of the products you have sewn there.

Good luck with your sewing!

Model 1.

If you are going to create something by any method, read it, understand the details, so that you have an idea of ​​​​the process. Take, for example, this guide. See what the K point means? This is the depth of the cutout in the center of the front. Points 3 and 6; is the depth of the armhole. Compare these values ​​with what you want to have as a result of the simulation. You can change them to either side, i.e. decrease or increase. The same can be said about the width of the entire product in the chest and waist. This is just an example that shows you one of the directions in modeling this kind of blouses or dresses.

If you haven't built a base pattern for yourself yet, use our step-by-step instructions and do it.
We take a drawing of our base pattern and copy the shelf and back onto a blank sheet of paper

See Fig. one

To build, we need a separate back and shelf.

Rice. 2

On the pattern-based backrest, along the side cut down from point P, measure 4 cm and set point 1. Draw a horizontal line from point 1 until it intersects with the middle line of the backrest and set point 2. This will be the upper cut of the back.

Fig.3

Departing from the side cut of the base pattern by 1 cm to the left, we draw a new line of the side cut parallel to it.

Rice4

We close the drawer. The upper and lower sections are drawn with a smooth line.

Rice5

On the pattern of the base of the front, we close the chest tuck, transfer it to the tuck at the waist. To do this, we cut the line G74 (points G7 and 4 indicate the tops of the bust and waist darts).

Fig6

The top of the new tuck (point E) will now be on the bisector of the angle of the open tuck, approximately 4 cm from point G7. To build, you can use a compass.

Fig.7

We measure 4 cm along the side cut line down from point P and set point 5. Stepping back from the side cut by 1 cm, we draw a new line parallel to the previous side cut line. From point 5 we draw a perpendicular to the intersection with the new side cut line and set point 6.
Now we draw the upper section of the front of the bodice. On the line of the middle of the front down from point B4, set aside 13-15 cm, we get point K. From point G7 up along the line of the closed tuck, set aside 10 cm, we get point K1. Connecting points K, K1 and point 6, we draw the line of the upper cut of the front.

Rice. 8

Figure 9 shows the details of the cut of the back and front of the bodice. We will adjust the length of the straps in the process of trying on the figure.

And as always, I wish you creative inspiration and self-confidence!

Download in one file | turbobit | | |

The rights to this article belong exclusively to the author. Full or partial use of the materials of this article in electronic publications on the Internet is possible only if the following conditions are met:
Author information must be saved. In the title or at the end of the published reprint, the source must be indicated www.website of the Internet resource "Sewing Master" with a direct, active, visible to the user, not closed from indexing by search engines hyperlink to this article.
The publication of texts by newspapers, magazines or other replication outside the Internet is possible only with the written consent of the author.

Style Description:

This dress with thin straps is one-piece. The silhouette is straight, free, tucks are only on the chest, there are no tucks at the waist. Practically all fabrics can serve as a material for manufacturing, both light, cotton fabrics, linen, silk, and dense, woolen fabrics. The standard long dress is mid-knee length or three fingers above the knee. But it is quite possible to sew such a dress of any length and decorate it as you wish. When making such a dress from thick or textured fabrics, the width of the harness can be slightly increased.

technical drawing

How to model this style:

To make this dress with thin straps, you need a scale ruler. How to make it and how to use it, see the article"Scale ruler for sewing".When cutting the fabric, it is necessary to make allowances for seams and hem. Each detail on the fabric should be placed along the shared thread, otherwise there may be distortions in the product. Pattern - the scheme is given based on a standard figure of size 48. For the manufacture of patterns, it is easier and more convenient to use graph paper.

Building the front:

Draw a right angle with a vertex at point A

Draw a vertical line 84 cm

Draw a horizontal line 26 cm.

From point A, lay down 23 cm.

Set aside 10 cm from t.A horizontally (the place for sewing on the straps)

From t.23cm set aside 26 cm horizontally.

From m. 84 cm set aside 18 cm.

From t.84 cm set aside 36 cm.

Set aside 2 cm from t.36 up.

For tucks along the side line, lay 4 cm from top to bottom (first tuck). The length of the darts is 8 cm, the depth is 2 cm. The distance between the darts is 3 cm.

Back construction:

1. Draw a right angle at point A

2. Down set aside 80cm

3. Set aside 24 cm horizontally.

4. From T.A. set aside 19 cm vertically.

5. From T.A, set aside 10 cm horizontally (the place for sewing on the straps)

6. From t.19 draw an auxiliary line 24 cm

7. From t.80 set aside 17 cm

8. Set aside 34 cm from t.80.

9. From t 34 set aside 2 cm.

Connect the resulting points in accordance with the drawing

Strap: Strap length 42 cm, width 5 cm (2.5 cm when finished).

Material consumption:

one length, plus 20 centimeters. This style can be attributed to economical models.

This style is suitable for almost all women, regardless of the figure. However, women with curvy shapes should avoid thin shiny fabrics and elastic knitwear when sewing this style. For obese women, in this case, denser materials are suitable. The waistline can be emphasized with a thin leather strap, which can be bright or contrasting with the main color of the dress. Recommended dress length: to the knee or slightly above the knee, but other lengths are also possible.

What material is preferred for tailoring:

The model can be made from any kind of material. It can be made from both patterned fabric and plain.

Sewing difficulty level:

manufacturing does not require much effort, entry level, suitable for beginners.

Modeling options:

this style can be used as a basis to which, if desired, you can add original additional decorative elements, resulting in a modified style. Ruffles, flounces, folds, additional straps can act as such decorative elements.

What clothes can be combined with:

Dress with thin straps made of lightweight fabric can be worn solo or combined with a light blouse or short sleeve T-shirt. Made of dense fabric, such a dress can be combined with a regular blouse, shirt. A dress with thin straps will fit perfectly into the wardrobe of almost any style. You can add completely different accessories and decorative elements to it. Made from "smart" material, it can be a sophisticated option for an evening dress. This style looks stylish in a duet with a short fitted jacket, with a long fitted jacket or a knitted openwork cardigan.

To set up printing of pattern No. 217 of A4 format, use "Test square No. 2"! The test square is located on the first sheet in the pattern file.

Sundress pattern. Dress with shoulder straps in a tapered A-shaped silhouette, above the knee length. On the detail of the front there are chest tucks, V-shaped neckline. The top edge of a product is processed by turning. There are slits in the side seams.

The length of the product in the middle of the back in finished form, see: 38 size: 69.6-72.1, 40 size: 69.6-77.2, 42 size: 69.6-77.2, 44 size: 69, 6-77.2, 46 size: 69.6-77.2, 48 size: 69.6-77.2, 50 size: 69.6-77.2, 52 size: 69.6-77.2, 54 size: 69.6-77.2

The general gains laid in the pattern: Pg: 2.2 cm, Fri: 32.2 cm, Pb: 12.5 cm.

Recommended material for tailoring: for sewing this product, we recommend natural thin fabrics with a tight weave without stretching. Such fabrics will hold their shape well, remove moisture in the heat and dry quickly. Cotton or linen is perfect. Fabrics can be plain or printed.

Fabric consumption with a width of 140 cm: 38 size: 1.0-1.05 m., 40.42 size: 1.05-1.1 m., 44.46 size: 1.25-1.35 m., 48, 50 size: 1.55-1.7m., 52.54 size: 1.65-1.8m.

Pattern details are given with processing allowances.

The degree of complexity of tailoring - "For beginners"

The photo shows a sundress sewn at the GRASSER bureau according to pattern No. 217

We want you to enjoy working with Grasser patterns and make the sewing process understandable, so a file with a very detailed description is attached to the pattern, which covers all the stages of working on the product, with step-by-step PHOTOS OF SEWING TECHNOLOGY!

The description also provides detailed information on the required consumption of fabric, materials and accessories.

The pattern in your order will be in two print options:

1. For printing on A4. You need to print the pattern on a regular printer on A4 sheets, then glue the sheets, cut out the pattern and you can sew!

2. For printing on a wide-format plotter. Pattern details are located on a sheet measuring 60 * 172 cm.

March 15.12.2019 02:43:35

Good afternoon. Please tell me, satin or silk is suitable for this model? Thanks

Administrator: Hello, yes it will

Valentine 21.11.2019 16:54:21

Good day. I wanted to download a free pattern, sundress. From the phone.
When you click on the "Download pattern" button, a bunch of pages with different symbols / letters open. And that is all. How can I get a free pattern by email?

Administrator: Hello, on what device are you downloading the pattern? On the phone? Perhaps you do not have a program for opening zip files.
You need to install the program, or open the pattern on another device where a similar program is installed.

The pattern is downloaded on the site, we do not send patterns by mail. Try downloading on another device.

89500656117 16.11.2019 17:02:47

Hello, is it possible to sew such a sundress from Angora?

Administrator: Hello, our recommendations are that the fabric keeps its shape well, is without stretching, you can choose the composition at your discretion.

Irina 13.11.2019 00:46:25

Good day! Tell me, please, I have Og-84 cm, From - 67 cm, About -90 cm, will size 42 fit me or is it better to take 44. Thanks in advance for your reply

Administrator: Hello, yes, your size is 42. The size of the dress pattern should be chosen according to the circumference of the chest.

Our table helps to determine the size -

Adel Vilenskiy 23.08.2019 17:39:28

Hello! Please tell me, for height 165, parameters 91/73/102, which size is better? Given that the trapezoid, I tend to 44. But I doubt

Administrator: Hello, the size of the dress pattern should be chosen according to the girth of the chest.
According to your parameters, size 46 is more suitable.

Mila I 07/29/2019 10:18:33

Hello! I sewed this summer sundress. But I can’t add my photo with the finished product to your site. How to do it?

22.07.2019 13:57:01

Hello!
If you sew a dress on a lining, do you need to change the pattern? Or is the lining and the main layer cut the same way? lining material silk, main - silk muslin

Administrator: Good afternoon!
The lining can be cut according to the details of the top.

Elena Muratova 17.07.2019 14:15:19

Good afternoon! I can't decide on the size. My parameters are 90-75-102.

Administrator: Elena, good afternoon!
Size 46 will suit you with a possible reduction in the chest area and an increase in the hips. We recommend that you sew a layout before sewing a product from the main fabric or cut out details with additional allowances so that you can let out a couple of cm during the fitting.

Marina 08.07.2019 16:00:48

Good morning. Can this pattern be used to sew a bottom dress?

Administrator: Marina, good afternoon!
Yes, of course, why not. It depends on what material and what will be the top dress :)

Lyuba 06/26/2019 13:28:18

Help me decide on the size. OG 102, OT 84, OB 105

Administrator: Hello, size 50 will fit you

Zulfiya 06/25/2019 21:23:26

Tell me, for chest size 97, waist 90cm, what size to take?

Administrator: Hello, size 48 will fit you

Daria Novikova 06/19/2019 20:21:33

Hello, help me decide on the size for parameters 87-73-99, take size 44 or 46? Many thanks.

Administrator:

Daria Novikova 07/03/2019 20:18:35

Svetlana 06/18/2019 09:55:42

Hello! Could you tell me, please, is it possible to sew such a sundress with a lining?

Administrator: Hello, you can. We have a pattern without lining, but you can cut it yourself.

Olga 06/18/2019 09:54:54

Good afternoon.
I really want to sew this model on my 56r. Can you please tell me what additions I need to make.

Administrator: You can add 1 cm for each cut of the side seam (4 cm in girth), sew the layout and see the fit. Just in case, leave more allowances if the volume is not enough.
You may need to adjust the length of the tuck.
And it may be necessary to adjust the solution of the tuck. It all depends on your anatomy, breast fullness. All you need to look at the layout, make changes if necessary and transfer to the pattern.

Svetlana 06/15/2019 18:14:43

Hello! tell me, please, what size to take on the parameters 110-97-116, so that it is free, to hide figure flaws? thanks in advance for your reply.

Administrator: Hello, size 54 will fit you.

Hope 12.06.2019 15:24:52

Good afternoon. Can you tell me if it is possible to use an extensible dublerin when sewing this cotton sundress.?

Olga 06/03/2019 18:51:48

Good afternoon!
Can you please tell me if Niagara blouse fabric is suitable for this sundress?

Administrator: Hello, yes, you can sew from Niagara.

Inna 05/27/2019 17:59:17

Hello. OG 82, OT 62. I downloaded size 42 and it is very big. What size is best? And is it necessary to glue the equity lines if the material is silk? Thank you in advance!

Administrator: Hello, this pattern should not be large for you, the increase in the chest is only 2.2 cm. You can, of course, take size 40, then in this case you will not have freedom in the chest circumference at all.

Tell me, was the print with the correct scale? The test square when printed was 10 by 10 cm?

Alice 05/22/2019 21:12:51

Hello, I want a sundress with a straight cut and below the knees (to the middle of the calves. Muscles), would it be appropriate if I choose not my height, but more? Or is it better to do it yourself?

Administrator: Hello, it's better to choose your height and add the length of the product.
If you are not tall, the chest darts may not be in place.
It's better to lengthen.

Anna 17.05.2019 21:22:42

Hello, is the staple suitable?

Administrator: Hello, yes it does!

Polyanskikh Natalia 14.05.2019 23:59:10

I liked the pattern.
I sewed myself a sundress for study and work from fabric in a cage to wear with blouses.
The bottom was made straight and without cuts.
I would like a similar pattern for large sizes.
My mother has long dreamed of a sundress to wear with blouses in winter and t-shirts in summer.
Her bust size is 124, waist 117, hips 135.

Administrator: Hello Natalia, thank you very much for your review! Glad you liked the pattern!
Let's think about the big size.

16.04.2019 00:41:19

Good afternoon! Tell me, please, how to narrow a sundress and make a straight line out of a trapezoid?

Administrator: Hello, you can adjust the side seams, remove as much as you need at the bottom and bring out new lines of the side seams.

Maria 04/05/2019 21:55:42

Hello. Tell me, by the standards, I get 42 sizes with a height group of 152-158. But your patterns come from 158 growth. Tell me what size to choose. And do I need to make any adjustments?

Administrator: Hello, the size should be determined by the circumference of the bust. If you have a chest circumference of 84, then size 42 will suit you. You need to choose a height of 158-164.
It may be necessary to transfer the chest darts, this can be determined by trying on.

Ekaterina Bizyaeva 27.03.2019 00:46:22

Good afternoon. I downloaded the pattern, but I can't print it. Test square No. 2 with a real print size comes out 10x10, and then the pattern itself does not fit.

Administrator: Hello, when printing, check the "orientation" setting. This setting should be “self-portrait / album”, because of the incorrectly set orientation, the margins of the sheet may move out.

Try a different scale setting, not "real size", but "custom scale". Set it to the desired percentage figure with which the test square will be 10 by 10 cm. Usually it is 100%, but your printer settings may differ.

With the same settings, with which the test square is printed exactly 10 by 10 cm, with a letter and a number in the upper left corner and with margins on all 4 sides, you need to print a pattern. Then the pattern will be the correct size, with margins and numbering.

If you are printing from a browser, please note that printing from a browser may not be correct. It is better to print the pattern by first downloading it to your device.

Detailed instructions for printing patterns are on our website -

Maria 03/20/2019 16:24:03

Hello. On OG 95 what size to take? I don’t understand 48 in the table is the Russian size?

Administrator: Hello, yes we have Russian sizes.
Size 48 fits bust 95

Diana 05.03.2019 00:04:32

Good afternoon!

I sew a sundress according to this pattern. I chose the size in accordance with my measurements (height 156, OG 74, OT 60, OB 86), that is, size 38, height 158-164.
After trying on the layout, it turned out that the sundress is very large and weighs on me the same way as on the mannequin in the video on sewing this model.
The length was below the knee and I reduced it by 10 cm.
The sundress turned out to be wide, so I pinned 1.5 cm from the sides. I lowered the armhole by the same amount.
And then the grooves. Since the front part was puffed up with a tail, I did the same manipulations as in the video: I made cuts to the center of the chest and parted them.
What happened can be seen in the attached photos. The breast recess became only 7mm.
Q: Do I need to leave a notch? Or does it turn out that with my proportions it is not needed at all?

Administrator: Hello, I consulted with the designer - it is better to leave the chest tuck.

Natalya 02/15/2019 02:33:12

Tell me, please, if the fabric is with a pattern, is it possible not to make cuts on the sides?

Administrator: Hello, yes you can!

Evgenia Rudenko 06.02.2019 20:03:35

Hello, tell me, what size is suitable for the parameters Og 101 From 74 Og 102?

Administrator: Hello, there is no need to write the same question under different models. The size of the product is selected according to the measurements of your body, and for different models of shoulder products it will be the same. Since it is selected according to the girth of the chest.
Here for belt products it may differ, as it is selected according to the girth of the hips.

For shoulder items (dresses, blouses, coats) your size is 50.
For waist products (skirts, trousers) Your size is 48

Evgeniya Rudenko 19.02.2019 10:27:50

Good afternoon! Is it possible to use strips of duberlin instead of a glue edge, cut off, respectively, along the lobar and along the oblique?

Administrator: Hello, instead of an edge, you can use a dublerin cut along a shared line. But you need to pay attention to the thickness of the dublerin - the dublerin may be thinner than the finished edge.

The oblique edge has a threaded stitch to support the seam and also, of course, the thickness of the doubler plays a role. In the case of an oblique edge, it is better to use it than doublerin.

Elizabeth 05.02.2019 02:22:03

Please tell me, at 86-60-89, what size is better to take so that it doesn’t sit in a sticky?

Administrator: Hello, size 44 will fit you

Elizabeth 06.02.2019 19:09:09

What size is the model in the photo?

Administrator: Hello, the model is 42 in size and the model itself is 42 in size.

Julia 01/31/2019 03:57:29

Hello! Please tell me at 85-64-87, height 154, is it better to take 40 or 42 size?
Thank you in advance:)

Administrator: Hello, size 42 will fit you

Ruzana 12/22/2018 21:54:37

Good evening. I don't understand, please clarify! I take a pattern according to my size, and I still need to make additions to this ??? I'm waiting for an email reply! Thanks a lot!

Administrator: Hello, no, the increases are already included in the model, you don’t need to add anything.

Katya 11.10.2018 00:10:55

Good evening, please tell me about the parameters 99-83-104, height 163, what size to choose?

Administrator: Hello, size 50 will suit you, height 158-164

Ekaterina 04.10.2018 01:30:40

Hello. Tell me, please, I am sewing this sundress made of artificial suede on a knitted basis, a rather dense material, is it necessary to glue the upper cuts of the neck, back and armholes? And also a question, I can’t find a description of tailoring and fabric consumption. Usually available in print.

Administrator: Hello, yes, it is better to glue.

The description file is located along with the pattern files in the zip archive that you download from the site.
Look for a file called: Description_poshiva_sarafan_217_pay.pdf

Tatyana 09/07/2018 02:28:03

Good afternoon! Could you tell me, please, is it possible to sew this model from silk? Thanks

Administrator: Hello, you can!

Julia Lobanova 09/04/2018 20:22:10

Very good patterns. I sewed their 100% cotton top according to this pattern. Very satisfied!

Administrator: Hello. Thank you very much!! Wear with pleasure!

[email protected] 15.08.2018 16:49:18

Hello, usually all your patterns fit me perfectly. I generally have a very standard 44 size, even the seamstresses in the studio praised. But this sundress somehow ... dangles, or something. It creates the feeling that it is too big in the girth area above the chest. That is how it should be?

Administrator: Hello, no it shouldn't. Check the bodice of the sundress with the patterns - have you stretched the top? The cuts are oblique and can easily be deformed.

And all figures still have features, so sometimes adjustments are required in some models.

Olga 08/09/2018 16:59:37

Good afternoon. Can you please tell me if leather, suede, artificial leather is suitable for this model? I would like a winter version of such a sundress. Thanks.

Administrator: Hello, yes it will.

Olga 08/16/2018 03:48:17

Elena 07/26/2018 11:49:30

Hello!
Thank you so much for the pattern and tutorial!
The pattern did not suit me a little, I chose the correct pattern for my height (158-164), but the tucks are located as if for a higher height. Approximately 2 cm lower.

Administrator: Elena, good afternoon!
Thank you for your feedback. We are glad that you appreciated the pattern and the master class!
The location of the darts may depend on the individual characteristics of the figure, as well as on the length of the straps. Therefore, we always recommend sewing a layout before the main sewing, in order to take into account all the nuances of fitting the product specifically to your figure.

Maria 07/23/2018 11:13:10

Good afternoon. On OG 92 and OB 104, which size is better to choose?

Administrator: Maria, good afternoon!
We recommend that you buy a pattern in size 46, but when sewing the layout, add allowances for the hips so that, if necessary, release a few centimeters during the fitting. It will be easier to adjust the pattern on the hips than on the chest.

Balnur Kubasheva 17.07.2018 15:56:52

Hello. Here in the master classes you used an adhesive edge, but what if I did not find such adhesive edges in my city (with and without a thread in the middle). And you order, delivery is problematic. And I live in Kazakhstan in Aktau. In our stores only cobweb-braid. Adhesive, duplicates are in footage. How to be what can be replaced, tell me. Thank you for being.

Administrator: Good afternoon! You can make a longitudinal edge yourself by simply cutting the doubler to the width you need.

Lyudmila 12.07.2018 17:20:26

Hello! Is it possible to cut this sundress on an oblique? From a less dense fabric?

Administrator: Good afternoon! The pattern is designed for cut along the share, if you cut along the oblique, you will have to make adjustments.

Daria Sokova 07/12/2018 17:16:41

Hello! But how to adjust the pattern in the cut area if I want to remove the width along the entire length of the dress?

evgenia 07/11/2018 11:43:19

Hello, the pdf on the plotter asks for a password when trying to open it in photoshop / corel.
I have no task to make corrections, just open and print on the machine.

Administrator: good afternoon! Try opening the pattern in the free PDF Adobe Reader

Inessa 10.07.2018 16:16:44

Hello, is the jersey suitable for this model?

Malka 07/09/2018 16:42:23

Thank you very much, dear Grasser, for an excellent pattern as always! Sewed on once. I wear it with pleasure!

Administrator: Thanks!

Evgeniya 09.07.2018 16:35:31

Hello! Unable to download pattern. Some code is opening...(

Administrator: Good afternoon! Try downloading the file from a different browser on your computer.

Maria Goncharova 07/09/2018 16:18:56

Hello, I printed the pattern - a test square 10 by 10. But the allowances are strange - there are more side seams than in other places. Maybe something with the settings? More specifically, on the sides - 1 cm, on the neck and armholes - 0.7 cm And the edging along the edge of the page is 1.5 cm. It was just smaller in the previous pattern

Administrator: Good afternoon! That's right, this model has such processing allowances

Oksana 04.07.2018 13:49:06

Tell me, please, a teenage girl OG 76, OT 65, and hips 90 ... Height 167. I'm afraid taking size 38, she will not fit in her hips ...

Administrator: Good afternoon! When choosing the size of shoulder items, we recommend focusing on the chest circumference and, if necessary, adjust the pattern in the hip area.
We advise you to choose size 38 and slightly widen the pattern in the hip area.

Xenia 06/29/2018 20:13:48

Hello, tell me, is the fabric with a coupon suitable? I printed out the pattern and I see that the bottom is not straight.

Administrator: Hello, yes the bottom is rounded, it will fit or not depends on which coupon.