Winter overalls for a boy with a zipper and warm fleece. Children's overalls with a hood - we meet winter fully armed Overalls on a heater to sew on a child

04.03.2022 Climax

Today you will know how to sew a jumpsuit for a newborn with your own hands. Sewing master class by Nadya Britvina.

Lightweight knitted overalls are simply a necessary thing for a baby, in cold weather it can be used as underwear under warm clothes, on warm days - as an independent item. The fabric for sewing overalls should be stretchable and soft, I used knitted terry.

Necessary materials:

main fabric 50 cm,
fabric for finishing (highly stretchable knitwear or ribana is used) - 10 cm with a width of at least 150 cm,
pattern,
tailor's scissors,
sewing threads,
interlining,
ruler,
tailor's chalk (a dry bar of soap is also suitable),
overlock,
metal buttons and a press for their installation (buttons can be replaced with buttons).

So, we sew a jumpsuit with our own hands. Tailoring progress:

1. Print out the pattern. These sizes are given for a child up to 56 cm tall, if desired, the pattern can be easily increased by adding a few cm along the shoulder, step and lower sections.

2. With the help of chalk, we transfer the pattern to the fabric, folded with the front side inward, the share is located along the details of the overalls. The material must first be washed, dried and ironed. We place the back detail with a fold to the fold of the fabric. We cut out parts of the product, adding allowances of 7-8 mm from all sides. We get one piece of a one-piece back, two shelves, two sleeves.

3. From the ribana, cuffs are cut out for the bottom of the sleeves and legs (4 strips 8 cm wide, 17 cm long), a collar (a strip for processing the neck on the pattern) and two straps for fasteners 31 cm long, 5 cm wide. It is desirable to choose a fabric for finishing that matches well with the main material in color.

4. In order for the fastener strips to keep their shape well, they must be glued with interlining (a special reinforcing material is glued to the wrong side with the adhesive side down using an iron).

5. We bend the strips glued with interlining along and iron.

6. We attach the strips to the central sections of the shelves at a distance of 0.7 cm.

7. Sweep the stitching sections from the side of the slats.

8. On the front side of the shelves, we sew the allowance for attaching the straps with a line to the width of the foot.

9. We put the bar one on top of the other and fasten it from below with a machine stitch.

10. We fold the shelf with the back with the front side inward, grind and overcast the shoulder sections.

11. We sew in and sew in the sleeves, we overcast the sewing seam from the side of the shelf. It turns out such an undershirt.

12. We sew the seams of the sleeve and side seams with a single line. This method of joining sleeves is much easier than sewing finished sleeves into armholes. We grind step cuts. If you can’t immediately stitch evenly, then pre-baste everything manually. We overcast all sections from the side of the shelves.

13. We fold the cuffs with the front side inward and grind the transverse sections.

14. We turn the cuffs on the face, put the sleeve / trouser leg into the cuffs, combine the transverse seams, equalize the sections and stitch at a distance of 0.7-0.8 cm. When stitching the cuffs, slightly stretch.

15. Overcast the seams from the side of the cuffs.

16. We fold the collar (strip for the neck) along the front side out, stitch it to the neck, evenly distributing the fit, overcast the seam of the collar. At the ends, we fix the overlay line with knots or manually.

17. On the front side, we give a finishing line along the neckline at a distance of the width of the foot.

18. It remains only to install the buttons with a press, or simply sew the buttons on one bar and sew the loops on the other

and iron the product at all seams.

The jumpsuit is ready, the baby will feel good and comfortable in it.

As you can see, it is quite possible to sew a jumpsuit for a baby with your own hands for a mother or grandmother who knows how to sew.

Another option for a creative gift for a newborn is personalized bodysuits:

More interesting:

TO WORK ON OVERALLS YOU WILL NEED

Fleece 1.15 cm with a width of 150 cm

Elastic band (elastic band) 1.10 cm wide 1 cm

Interlining

The pattern is given without seam allowances. They will need to be made when cutting: along the cuts -1.5 cm, along the bottoms -2.5 cm.

1 - front half (2 parts)

2 - back (2 parts)

3 - sleeve (2 parts)

4 - hood (2 parts)

5 - the middle part of the hood (1 piece with a fold)

On pattern number 1, there is a 5 cm wide bar along the middle of the front. This is a pick. It must be re-shot as a separate additional detail.

To process the edge of the placket and hood, you will need a 1.5 cm wide oblique trim (3 cm in full width). You will find information on how to make it yourself. On the layout plan, the shaded places must be glued with interlining.

The picture shows the most appropriate arrangement of parts.

DESCRIPTION OF WORK

1. Sew back seam

2. Stitch the sleeves to the back and front halves of the jumpsuit along the raglan line

3. Stitch grooves on the hood

4. Attach the middle part of the hood to the side parts

5. Attach the pick along the edge of the front, having previously glued it with interlining.

6. Stitch the hood into the neck of the overalls

7. Process the cuts of the front and hood with an oblique trim

8. Put buttons

9. Run the side and crotch seams on the jumpsuit

10. Fold the bottom of the sleeves and legs

11. Insert rubber bands

That's all! Baby overalls are ready! As always, we got it done pretty quickly. In this outfit, any child will feel comfortable and warm.

If you wish, you can dream up and come up with a model that will combine different fabrics, different colors and textures. For example, the front and back are made of multi-colored fur, and the sleeves are made of plain fleece or thick knitwear. Come up with your own original combinations.

I hope you enjoyed this offer. Take a look at the rubric. There you will find many more interesting and useful things for you and your family members.

Sew with pleasure and for the joy of loved ones!

Leave your comments and ask questions if you have any.

Find out even more interesting things:

Women's straight silhouette dress

Greetings to all ladies who love beautiful elegant clothes and are ready to create their own wardrobe! The dress is gaining another round of popularity, despite the dominance of trousers. ...

Women's lace blouse

Greetings to all lovers of lacy openwork things! Lace products are always a special theme in women's wardrobe, thanks to which it becomes more delicate and sensual. ...

Winter is coming - the time for fun winter fun and outdoor games. What can cause more tenderness in parents than the sight of children squealing with joy, racing along snowy alleys and playing snowballs? However, do not forget that winter is also a cold season, when the likelihood of colds is increased. Therefore, for caring and wise parents, winter is an occasion to update and replenish the children's wardrobe, because it often happens that the kids have already grown out of their last year's winter clothes.

Children's jumpsuit with a hood - we meet the winter fully armed

Today we will talk about how to sew a children's jumpsuit with a hood with your own hands. Indeed, any mother will surely be a reason for special pride and tenderness for a child who fearlessly meets winter not bought somewhere in a store or on the market, but sewn by mother's hands, providing the maximum level of comfort and warmth.

Contrary to popular belief, you do not need to be a professional in sewing children's clothes yourself. The main thing you will need is a pattern for a baby jumpsuit with a hood, inexpensive materials that are now sold in every fabric store, some cutting and sewing skills and a little free time.

Cutting and material preparation

As for the material that we will use - its choice depends entirely on your desire and imagination. The main thing when choosing is to take into account that we sew for children, so the following requirements are mandatory for the material: it must be practical, strong and, if possible, wrinkle-resistant, and at the same time it must repel dirt, dust and moisture from itself.

The main canvas should be about 60 by 100 centimeters in size, the lining is best made from quilted material of the same size. It is clear that the dimensions of the lining are chosen approximately the same. Also, for decoration, you may need a little decorative fabric, we believe that there should be no problems at all, various shreds and strips of such fabrics can certainly be found in the storerooms of any housewife. You will also need an elastic band about 30 centimeters long, a cord about 70 centimeters, a flat zipper about 20 centimeters long and a spool of strong thread.

You can download the finished pattern at the end of the publication. It is best to print it on a printer in a one-to-one size, cut it out, and trace the fabric using paper templates. When cutting the material, keep in mind that it is necessary to leave allowances of one centimeter.

Let's start sewing

When assembling the jumpsuit, you first need to stitch the middle and shoulder seams on the back. After that, the seam allowances must be ironed. Then we sew a hood along the neck line. Now the sleeves are in turn - we sew them into the armholes. After that, you need to grind the middle seam of the front.

Next, we repeat all these operations for the lining - in fact, we assemble another jumpsuit from it. When the lining is ready, we put it inside the overalls, carefully combine all the seams, cuts of the sleeves and bottom, after which we fasten the lining and measure. At this stage, it will still be possible to change something if it doesn’t turn out quite right (after, of course, you can also fix something, but it will take much more time and work).

Now you need to stitch the side seams into the seams at the sleeves, crotch seams. After that, the allowances in the middle of the front on the front parts of the main and lining fabrics will need to be turned inside out and ironed. At this stage, we sew in a zipper, and now we tuck the upper edges of the braid.

As for the neck, it should be tucked to the wrong side, basted and stitched. Now it remains to thread the cord into the drawstring and fasten the limiters at its ends. We pass the elastic band through the bottom of the sleeve, tighten them and then sew up the hole.

Now we have a hood. On the front and lining fabric, it is necessary to grind the middle seam, align and process the allowances with an iron. After that, attach the front fabric and lining to each other, stitch the edges, iron the hood, turning it to the right side.

It remains to decorate our jumpsuit. For this, an applique from the decorative fabric that we have prepared is well suited. It all depends on your artistic taste and skill, we sew the appliqué on the front and our children's overalls are ready. Now little fidgets are not afraid of winter with its cold weather!

To build a pattern drawing, take the following measurements.

Half neck.

Half bust.

Half hip.

Back length to waistline.

Shoulder length.

Back width.

The length of the sleeve.

Pants length on the side.

Pants length to the knee.

Seat height.

Building a drawing.

Back and front halves.

Overalls length. Draw a vertical line on the left side of the sheet, on which set aside the measurement of the length of the back plus the measurement of the length of the trousers plus 4 cm and put points A and H.

Draw horizontal lines from points A and H to the right.

Overalls width. From point A to the right, set aside the measurement of chest girth (Og) divided by 2 plus 8 cm and set point B. From point B, lower the perpendicular to the lower horizontal line, mark the intersection point as H1.

Back length to waistline. From point A down, set aside the measurement of the length of the back to the waist line plus 2 cm and set point T. From point T to the right, draw a horizontal line until it intersects with line BH1, mark the intersection point as T1.

seat height. From point T down, set aside a measurement of the height of the seat plus 2 cm and put a point W. From point W to the right, draw a horizontal line, the point of intersection with the line BH1, mark W1.

hip line. From point W up, set aside 1/3 of the measurement of the height of the seat and set point B. From point B to the right, draw a horizontal line, mark its intersection point with line BH1 as B1.

knee line. From point T down, set aside the measurement of the length of the trousers to the knee plus 1 cm and set point K. From point K to the right, draw a horizontal line, mark its intersection point with line BH1 as K1.

Back width. From point A to the right, set aside the measurement of the width of the back divided by 2 plus 1.8 cm and put point A1.

Armhole Width. From point A1 to the right, set aside ¼ measurements of the half-girth of the chest plus 1.8 cm and put point A2. From points A1 and A2, draw down vertical lines.

Back neckline. From point A to the right, set aside 1/3 measurements of the half-girth of the neck plus 1 cm and put point A3. From point A3, restore upward a perpendicular, on which set aside 1/10 measurements of the half-girth of the neck plus 1 cm and set point A4. Divide the angle AA3A4 in half, from point A3 along the dividing line of the angle, set aside 1/10 measurements of the half-girth of the neck and set point A5.

Connect points A4, A5, A with a smooth line.

Shoulder cut back. From point A1 down, set aside 2 cm for normal shoulders, 1.5 cm for high, 2.5 cm for sloping and put a point P. Connect points A4 and P with a straight line, on which from point A4 set aside the measurement of shoulder width plus 1.6 cm on the tuck plus 0.5 cm on the landing and put a point P1.

Set aside 4 cm from point A4 along line A4 P1 and set a point O. Draw a vertical line down from point O, on which set aside 6 cm and set a point cO1. Set aside 1.6 cm from the point O along the line A4P1 and set the point O2. Connect points O1 and O2. From the point O1 along this line, set aside the length of the segment OO1 and set the point O3. Connect points O3 and P1 with a straight line.

Back armhole depth. From point P down, set aside ¼ measurements of the half-girth of the chest plus 7 cm and set point G. Draw a horizontal line through point G, mark the point of intersection with the line AN G1, with the line limiting the width of the armhole - G2, with the line BH1 - G3.

Back armhole line. Set aside 1/3 of the length of the PG segment plus 1 cm from the point G upwards and set the point P2.

Divide the corner G of the armhole in half, from the point G along the dividing line of the angle, set aside 1/10 of the width of the armhole plus 0.9 cm and set the point P3.

The width of the armhole - segment GG2 - divide in half and put a point G4. Connect points P1, P2, P3, G4 with a smooth line.

Front armhole depth. From point G3 up, set aside ½ measurements of the half-girth of the chest plus 4.5 cm and put point B1. From point G3 up, set aside ½ measurements of the half-girth of the chest plus 4.5 cm and put point B1. From the point G2 up, set aside the length of the segment G3B1 and set the point B2. Connect points B1 and B2 with a straight line.

Front neckline. From point B1 to the left, set aside 1/3 measurements of the half-girth of the neck plus 1 cm and put point B3.

From point B1 down, set aside 1/3 measurements of the half-girth of the neck plus 2 cm and put point B4.

Connect points B3 and B4 with a dotted line, divide it in half. Connect the bleeding point with a dotted line to point B1. From point B1 along this line, set aside 1/3 measurements of the half-girth of the neck plus 1.5 cm and put point B5.

Connect points B3, B5, B4 with a smooth line.

Auxiliary points for the design of the front line. Set aside ¼ from point G2 up

measurements of the half-girth of the chest plus 6 cm and put a point P4.

From the point G2 up, set aside 1/3 of the length of the segment G2P4 and set the point P5.

Divide the angle P5G2G4 in half, from the point G2 along the dividing line of the angle, set aside 1/10 of the width of the armhole plus 0.6 cm and set the point P6.

Shoulder front cut. Draw a straight line from point B3 through point P4. On this line from point B3, set aside the measurement of the length of the shoulder and put point P7.

armhole front line. Connect points P7, P5, P6, G4 with a smooth line.

Side cut of the top of the jumpsuit. From point G4, lower the perpendicular to

line HH1. Mark the points of intersection with the lines of the waist, hips, seat height, knee and the lower horizontal line T2, B2, W2, K2 and H2. Point B2 ends the line of side cuts of the top, below is an auxiliary line for constructing sections of the trouser part.

Front cut line. Draw a horizontal line from point Ш1 to the right, on which, from point Ш1, set aside 1/10 measurements of the half-girth of the hips plus 0.5 cm and put point Ш3.

Set aside the same segment from the point Ш1 up and put the point Ш4. Connect points Ш3 and Ш4 with a dotted line, divide it in half. From the division point, restore the perpendicular down, on which set aside 0.3 cm. Connect the points B1, 0.3, W3 with a smooth line.

Fold line. Divide the line Ш2Ш3 in half, mark the division point as Ш5. Draw a vertical line through point W5. Mark the points of its intersection with the lines of the waist, hips, knee and lower horizontal, T3, B3, K3, H3.

The bottom line of the front half of the jumpsuit. From point H3 to the left and right, set aside ½ measurements of the width of the bottom of the trousers minus 1 cm and put points H4 and H5.

Set aside 0.5 cm from point H3 upwards and connect the resulting point with straight lines to points H4 and H5.

Side cut front. Connect points B2 and H4 with a straight line.

Step cut of the front half. Connect points Ш3 and Н5 with a dotted line, divide this line in half. From the division point to the left, restore the perpendicular, set aside 1-2 cm on it and connect the resulting line with a smooth line with points Ш3 Н5.

Auxiliary point for the design of the line of the middle cut. From point W to the left along the horizontal line, set aside 1/10 measurements of the half-circumference of the hips plus 0.5 cm and put point W6.

Back fold line. Divide the line Ш6Ш2 in half, mark the division point as Ш7. Draw a vertical line through point W7. The points of intersection of this line with the lines of the waist, hips, knees and the lower horizontal mark T4, B4, K4, H6.

Pitch line extension. From point W6 to the left along the horizontal line, set aside 1/10 measurements of the half-circumference of the hips plus 2.5 cm and put point W8.

Bottom line of the back. From point H6 to the left and right, set aside ½ measurements of the width of the bottom of the trousers 1 cm and put points H7 and H8. Set aside 0.5 cm from point H6 down and connect the resulting point with straight lines to points H7 and H8.

Side cut back. Connect points B2 and H8 with a straight line. Mark the point of intersection of this line with the knee line as K5.

Knee Width. From the point K4 to the left, set aside the length of the segment K4K5 and put the point K6.

Step cut back. Connect point K6 with a straight line to point H7 and a dotted line to point Ш8. From the W8 point down the dotted line, set aside 1 cm and put the W9 point. Divide the segment Ш9К6 in half, restore the perpendicular from the division point to the right, on which set aside 0.5 cm. Connect the resulting point with a smooth line with points Ш9 and К6.

Middle cut line. Connect points T and Ш9 with a smooth concave line.

Sleeve construction.

Length. Draw a vertical line on the left side of the sheet, on which set aside the measurement of the length of the sleeve and put points A and H. Draw horizontal lines from these points to the right.

Width. From point A to the right, set aside the width of the armhole from the overalls drawing, multiplied by 3, minus 1 cm, and set point B. From point B, lower the perpendicular to the lower horizontal line, mark the intersection point as H1.

Eye height. From point A down, set aside ¾ of the depth of the armhole of the back and set point O. From point O to the right, draw a horizontal line, mark its intersection point with line BH1 as O1.

eye line. Divide the line OO1 into six equal parts, mark the division points as O2, O3, O4, O5, O6. From these points, draw vertical lines upward, mark the points of intersection with the AB line as A1, A2, A3, A4, A5.

From point O2 upwards, set aside 1/3 of the height of the eye minus 0.5 cm and set points A7 and A8.

From point O6 up, set aside 1/6 of the height of the eye and set point A9.

Connect points O, A6, A7, A3, A8, A9, O1 with a smooth line.

bottom line. Continue the A3O4 line down, mark its intersection point with the HH1 line as H2. Set aside 2-3 cm from the H point to the right and put the H3 point. Divide the H3H2 segment in half, set aside 0.5 cm from the division point down and connect the resulting point with a smooth line to the points H3 and H2. Set aside 2-3 cm from point H1 to the left and put point H4. Divide the H4H2 segment in half, set aside 0.5 cm from the division point upwards and connect the resulting point with a smooth line with points H4 and H2.

Article from the site

It's getting colder outside every day. It's time to warm up. Today I want to show you how to sew a children's jumpsuit with your own hands. I sewed this jumpsuit from a ready-made coupon, where the pattern of the right size is already printed. Fabric with a pattern ordered in the store "Bobbin" (patterns on fabric with your prints). Sublimation printing on fabric (I have fleece, you can choose another fabric). The drawing was chosen by my daughter.

This is how the pattern looks on the fabric, the seam allowances are already taken into account (1 cm). Marks are also marked on the fabric. A hood can be ordered instead of a collar.

We cut all the details of the pattern: 2 back details, 2 front details, 2 sleeve details, a collar and 4 cuff details. Cuffs are best sewn from ribana or cashmere. I decided to make a collar from the main fabric, that is, from fleece.

We grind both parts of the back from the wrong side, as shown in the photo below.

We connect the details of the front and back in the shoulder seams.

We straighten the front and back and sew the sleeve into the armhole, combining the marks.

We fold the overalls along the shoulder seams and grind the side seams from the wrong side, including the sleeves and legs (where it is marked with a dotted line).

Then we sew one of the sides of the collar detail to the neck, connecting the marks.

Clips for fixing the fabric can be.

Let's get to the lightning. For a size of 128-134 cm, the length of the zipper = 60 cm. Fold the collar in half and insert the zipper between the layers of fabric.

We sweep and stitch one of the two sides of the zipper along the entire length.

Before basting the second part of the zipper, it is better to make a protective bar for the zipper. Since I made the cuffs from cashmere, the details of the fleece cuffs remained on the coupon. From one part, I cut 2 parts in the form of a semicircle about 5x8 cm in size.

We put these parts on top of each other with the front sides inward and sew, where it is marked with a dotted line.

We turn this part on the front side and sew it to the second part of the zipper in the appropriate place. Moreover, most of the protective bar will be on the wrong side of the zipper.

Then we sweep the second part of the zipper, also bending the collar in half.

We turn and align the corners of the collar. We fasten the zipper and check that everything is even. If everything is smooth, then we sew (sew in) the zipper.

We bend the second edge of the collar and sew it by hand with a blind seam.

On the front side, at the seam next to the collar, you can lay a straight line.

We fasten the zipper and fasten the bottom with a seam. Cut off the excess length of the zipper.

On the front side, we lay a straight line along the entire length of the zipper, where it is marked with a dotted line.

We sew a step seam.

It remains only to sew the cuffs. We bend the details of the cuffs and sew them into a ring with smaller sides.

We bend the cuffs in a circle so that the seams remain inside.

We insert the cuffs, as shown in the photo below and grind in a circle.

The fleece overalls for the daughter are ready.

Veronica is 7 years old, height 127 cm. I took the pattern of overalls for a height of 134 cm - the size fit perfectly.

Home baking recipes with photos - step by step master classes