Any mother-needlewoman is happy to knit for her kids. After all, what is made with your own hands is filled with love and warmth.

To create true DIY magnificence, you just need a little patience and follow my instructions. And then you will succeed! To complete this master class, it is necessary to choose only high-quality yarn in order to avoid an allergic reaction on the delicate skin of the child.

You will need:

• Yarn 100% acrylic;
• Hook #3;
• Brooches or other decorations, ribbons;
• Scissors, thread and needle.

List of abbreviations:

• V.p. - air loop
• S.n. - a column with 1 crochet
• S.b.n. - single crochet

How to crochet sandals - a master class for beginners:

The sole and upper part of sandals.

1. We collect 10 vp with a light green thread. Then you need to insert the hook into the 8th loop and continue knitting s.n. In the next four rows, add 1 loop at the same time on both sides of the knitting. After 4 rows are knitted, the number of columns will be 16. When 24 rows are knitted from the beginning of work, it is necessary to start decreasing. To do this, you must simultaneously knit 2 loops together along the edges of the product. So you need to knit only 4 rows, in the end there should be 8 columns. At the end, it is necessary to tie the entire part of the s.b.n. in a circle.

We start knitting the heel in height.

1. To do this, you need to count 7 rows from the beginning of knitting the sole and start to perform one row of s.n., while capturing only the back of the loop of the lower columns. Having knitted a row to the opposite side, you need to dial 30 ch. and attach to the beginning of the heel. This will be the first strap of a knitted sandal.

2. We knit it with s.n. in a full circle, while not forgetting to perform three reductions of the columns: the 1st must be knitted exactly in the middle. It consists of 5 columns in one. The 2nd is performed at the place where the strap is attached to the heel. To do this, knit 3 columns in one loop. And the 3rd is performed similarly to the second, only on the opposite side.

3. Next, we continue knitting the heels evenly on both sides, subtracting 2 columns each. So we knit two rows. Again we perform a set of 30 ch, for the next strap, but unlike others, it should not have decreases. It is this strap that we will fasten, for better fixation of the sandal booties on the leg, therefore, it must have a free end.

4. At the end, we perform lace. To do this, we knit 1 s.n., 1 ch. and s.n. We perform sandal on the entire upper part of the booties, including on the strap. Next, we knit arches: 1 s.b.n., 3 s.n. and so on to the end of the row.

5. We knit the remaining straps. We introduce a hook under the first strap and knit a row of s.n., while not forgetting to grab only the back thread of the loop of the bottom row. We attach the thread to the sixth column from the previous strap and dial 12 ch, 6 next sc. we knit from 6 columns of the previous strap (exactly in the middle of the booties), then we knit 12 ch. We knit the next row with s.n.

We also knit the last strap from the 6th column from the previous strap. We collect 10 ch, 6 s.b.n., 10 ch. Then we perform a series of s.n. In the middle we knit 6 columns into one.

6. On the edge of the sole we perform openwork: 1 s.n., 1 ch, 1 s.n., and so on throughout the circle. Then 3 s, 1 s.b.n. around the entire circumference of the sandal. On the bends of the sole we knit 3 columns from each loop. We knit the second sandal in the same way.

We decorate our knitted sandals.

1. We stretch the ribbon along the edge of the lace and tie a bow out of it on the back surface of the booties-sandal.

2. Next, we do the same with top booties-sandal and strap - lock. We tie a bow on the side of the sandal, it will be a full-fledged clasp.

3. Then we proceed to decorate the central part of the sandal. For this fit any jewelry. It is she who will determine the true beauty of the entire product. For my booties, I picked up Barbie doll jewelry. It is perfect for girls of all ages. We fasten the jewelry with a thread as tightly as possible. After all, the baby is very curious and can, if desired, taste it, so do not spare the thread.

4. Well, now you know how to knit sandal booties for a princess! These sandals will decorate any outfit of a little fashionista!

In the hot summer season, many fashionistas prefer such stylish and seductive shoes as sandals. The fashion industry offers a huge range of these products: from the simplest to the outrageous models. However, if you want to diversify your wardrobe with original shoes, pay attention to knitted sandals, especially since if you have desire and imagination, you can make them yourself.
Knitted shoes are generally very popular in Lately. But if in the recent past, needlewomen knitted slippers and booties for babies, today fashion trend are knitted sandals. Such shoes not only look attractive, but due to their texture are unusually soft and comfortable.

Crochet sandals

Knitted sandals are especially suitable for women who, when wearing ordinary models, constantly form corns.

Such products, as a rule, are crocheted with openwork knitting. Depending on the sole, these can be models with low running, heels (including stilettos) or wedges. Knitted decor can also be found on the wedge. Looks quite original and interesting.
As for the knitted top, it can be closed or open. In home-made models, of course, the second option is more common, since it is easier to perform.

How to knit sandals yourself

Every girl always has old sandals in her wardrobe, the top of which is torn or stretched. Based on them, you can make stylish knitted shoes for yourself (of course, provided that the sole is still in good condition).
Pay special attention to the choice of yarn. For summer models natural raw materials (cotton or linen) are ideal, only a small synthetic additive is acceptable.
Of course, natural threads are not as practical as synthetic ones. However, in such sandals your foot will not slip, which is especially important for summer shoes (slip on high heels or a wedge heel may cause injury).
Thread colors also matter. Too light colors (white, beige, pink), given the condition of our roads, are not very practical.

Melange yarn always looks original

Starting work, it is necessary to pierce holes around the entire perimeter of the sole (at a distance of no more than a centimeter from each other). For this purpose you will need an awl. If the sole is soft enough, then this will be easy to do. The holes should be wide enough for the thread to pass through.
The work is crocheted. We connect the yarn with the fishing line and start tying the sole with single crochets. You need to knit extremely tightly so that when you wear shoes, the top does not stretch out. In this way we tie all the holes.
Next, we remove the fishing line and knit a few more rows with single crochets to form a dense fabric. And after that we remove the fishing line and proceed to the main pattern.
With the help of the crochets, we form an openwork mesh or any other pattern to your liking, knitting the heel and toe parts separately.
In the process of work, you need to measure sandals to make sure they are comfortable.
Some needlewomen separately knit the upper part of the sandals, and then glue it to the sole, especially if it is thick and hard. Sometimes an insole is additionally knitted.
To decorate the finished product, in addition to pebbles, beads and rhinestones, you can knit a flower from the same yarn.
On the basis of sandals with torn straps and, again, a decent sole, you can build a macrame-style product. Cut off the worn part, arm yourself with linen threads and start weaving.

look detailed master classes: How to knit sandals and repeat such beauty!

How to knit sandals part 1

How to knit sandals part 2

If you do not know how to crochet, then the knitted look of shoes can be given using knitted braid or lace. Lace makes the sandals simply luxurious.

Knitting crochet booties-sandals It will take you little time, and everyone will enjoy the result. The length of the sole is 12 cm. Our sandals are knitted for a child of 6-12 months.

For work you will need:

• Yarn Pekhorka Successful blue (100% cotton; 50g - 220m);
• YarnArt Summer yarn (70% cotton - 30% viscose; 100g - 400m);
• Hook number 2.

Legend:

• VP - air loop;
• CCH - double crochets;
• RLS - single crochet;
• SS - connecting column;
• CC2H - a column with 2 crochets;
• CC3H - a column with 3 crochets.

The first part of the video tutorial on crocheting the soles of booties-sandals:

Description of the process of knitting soles for crochet booties-sandals:

Below is a diagram by which you can tie yourself.

Crochet soles for booties-sandals:

• 1 row: 1 VP and in the 2nd loop from the hook we begin to knit - 7 RLS, 7 CCH and in last loop we knit 8 CCH (rounding the toe) and now we knit the opposite side - 7 CCH, 8 RLS and in the same loop we knit 3 RLS (rounding the heel), SS;
• 2nd row: 3 VP, 15 dc, 5 turning loops we knit in one loop 2 dc each (5 times), go to the opposite side and knit 16 dc, 3dc in one loop, 4 dc in one loop, 3 dc in one loop, sl-st ;
• 3 row: 3 VP, 15 CCH, turning loops - in one loop - 2 CCH, 1 CCH, in one loop -2 CCH, 1 CCH, in one loop -3 CCH, in one loop - 3 CCH, 1 CCH, in one loop - 2 CCH, 1 CCH, in one loop -2 CCH. We pass to the opposite side 16 CCH, in one loop - 2 CCH, 1 CCH, in the bottom of the loop - 2 CCH, 1 CCH, in one loop -3 CCH, in one loop - 3 CCH, 1 CCH, in one loop -2 CCH , 1 CCH, in one loop -2 CCH, SS.
• 4th row: RLS.

For each of the soles you need to tie 2 insoles. Only 4 pieces.

We apply 2 insoles with the wrong side to each other and knit RLS in a circle with white yarn.

The second part of the video tutorial on crocheting the top of booties-sandals:

We knit a heel with a strap

We mark the middle of the heel, count 7 loops in different directions and also mark with pins.

We report 7 loops from the pin and start knitting the right sandal:

• 1 row: (blue yarn) 3 ch, 6 dc, 15 ch, 7 dc, 21 ch (strap);
• 2 row: turn knitting, 1 VP and knit the entire row of RLS;
• 3 row: 3 VP, we knit the entire row of CCH, at the end of the strap we do not knit 9 loops. These will be the holes for the buttons. We knit like this: * 1 VP, skip one loop and knit 2 CCH * - 3 times.
• 4 row: (white yarn) we tie the entire heel and RLS strap.

The left sandal is knitted in the same way. Only the strap should be in the other direction, so we will have 1 row like this - 21 VP, 7 CCH, 15 VP, 7 VP. Further rows will be like the right sandal.

We knit a toe and straps of sandals

You can print the diagram below.

Knitting pattern for a strap and harness for sandals:

We collect 16 VP with blue yarn.

We knit a side harness (white yarn in 2 threads). We mark on both sides with pins the place where we will start knitting the harness. We attach the thread and knit 1 VP, 5 RLS. Next, we continue to knit RLS to the length of the harness we need, it all depends on the fullness of the foot, I have 7 cm. We leave the end of the thread long, in order to then sew the harness on the opposite side.

We begin to knit the central harness (blue yarn in 3 threads). We mark with two pins where the beginning and end of the harness will be. We attach the thread and knit:

• From 1 to 4 row: 1 VP, 7 RLS;
• 5 row: 6 VP, 2 VP, skip 2 loops and knit 2 СС3Н, 2 VP, skip 2 loops and knit 1 СС3Н in the last loop. It turned out a hole for the side harness.
• From 6 to 10 row: we knit 7 sc;
• 11 row: 6 VP, skip 2 loops - 1 СС2Н, 2 VP, in the last loop 1 СС2Н. There is a hole for a strap.
• 12th row: RLS.

We pass the side harness through the hole and sew it on the opposite side. We pass the strap through the second hole. We sew on a button. Sandals are ready.

Moms really want to pamper their little princesses, buy beautiful toys and dress them up in dresses. A little fashionista should have everything in an adult way, this even applies to shoes. Add variety to ordinary shoes, tie your beauty crochet baby sandals. Of course, you can’t walk in them on the street, unless you sew them to the sole, but for home or for riding in a stroller, they are quite suitable.

For work you will need:

• 50 g white yarn, 20 g red yarn. Yarn Gazzal Baby cotton (100% cotton, 50 g - 225 m);
• hook number 3;
• 2 buttons;
• beads;
• needle;
• a thread.

Legend:

• VP - air loop;
• CCH - double crochet;
• RLS - single crochet;
• SP - connecting loop.

Description of the process of knitting children's sandals crochet:

In finished form, using the above yarn, the sole should be 12.5 cm long and 6 cm wide. This size is suitable for a girl of 12 months. To calculate the sole of a different size, you need to measure the length and width of the foot, in this case the required length is 12 cm and the width is 6 cm. Dial a chain of VP with a length equal to the difference between these two numbers (difference 12 cm-6 cm = 6 cm). The chain turned out from 16 loops. For a shorter or longer sole, the knitting pattern of the toe and heel remains the same, only the number of intermediate loops changes. The red yarn piping adds a little to the length. The upper is knitted in the same way regardless of the size and is suitable for sole lengths from 10 to 14 cm.

Knitting soles

We start knitting sandals from the sole according to the scheme. The scheme is quite simple and quickly knits, first we use white yarn.

We collect 16 VP and 1 VP for lifting. In the first row we knit 7 sc, 7 dc, 7 dc in the last loop. Turn knitting and reverse side we knit 7 dc, 7 sc and 4 sc in one loop. We close the row 1 joint venture.

In total, you need to connect 4 such details.

Knitting the top

When the soles are ready, we continue to knit the top of the sandals with white yarn.

For the right sandal from the center of the heel, count 8 + 5 loops to the right, fasten the thread, make 3 ch for lifting and dial 4 dc towards the center of the heel. Then cast on 16 ch, skip 16 sts on the sole and knit 5 dc and 20 ch on the left side of the sandal.

On the second row, work 1 ch and knit the entire row of sc to the end.

In the third row, dial 3 VP for lifting and knit the row almost to the end of the dc. Before reaching the end of row 4 loops, make 1 VP and skip 1 loop for the hole for the button.

Finish row 3 dc. Tie the entire edge of the sc with red yarn.

For the left sandal, we act in a similar way, only we make a report of 8 + 5 loops to the left.

We collect 3 VP, we knit 4 CCH, 16 VP and 16 loops we skip on the sole. Then 5 CCH and 20 VP for the fastener.

We also knit the second and third rows, we tie them with red yarn.

For knitting the front of the sandals, we will use the pattern, it is the same for both sandals.

On the front central part of the sole, leave 9 loops, count another 10 loops to the right side and start knitting. To do this, we fix the thread and perform 3 VPs for lifting, then we knit 9 CCHs towards the center, we knit 7 VPs and skip 9 loops on the sole. We continue to knit further according to the scheme to the end of the row.

In the second row, we collect 1 VP and we knit the entire row to the end of the RLS.

In the third row, we begin to remove the loops, for this we knit 3 VP, 1 CCH and 4 paired CCHs, thereby removing the loops. In the central part we knit 3 sc in one loop, then 1 sc and again 3 sc in one loop. We complete the row with ten CCHs connected in pairs.

The fourth row consists of 1 VP and 12 RLS. In the fifth row, reduce the number of loops to three. To do this, we knit 3 VPs for lifting and 3 CCHs in one loop, then we combine 5 more CCHs in the central part and combine 4 CCHs on the left side. We finish knitting 1 joint venture, gathering together the beginning and end of the row.

We tie the sandals with red yarn RLS. Knitting finished.

It remains only to sew on the buttons and decorate the sandals with beads.

If desired, they can be embroidered with beads on the front, can be connected with a jumper, as in the photo.

Our sandals are ready!

We hope that following the diagram and description, you have obtained the same wonderful sandals for a little princess.

Share with us your result and leave comments.

How good long winter evenings, sitting comfortably on an armchair in front of the TV, to realize all your handmade desires. A young mother, a resident of Georgia, Lina Lima, tells in photographs how she knitted booties - crochet sandals for your boy

If your baby does not walk yet, and he needs sandals solely to complete the outfit, then I recommend knitting crochet these are light summer sandals.

I confess that the baby's bare legs strain me, and most of the shoes are designed for kids who are already taking their first steps. And in my opinion, these shoes are too heavy and hot. And light knitted for the baby will be just the way.

So, we need threads of two colors and a hook matched to the size of the yarn.

And also here is a knitting pattern crochet children's soles sandals found on the Internet. Symbols generally accepted

1. We collect a chain of 16 loops

2. We make one c. lifting, seven tbsp. b. n. and seven st. double crochet

3. In the last loop we place 7 tbsp. double crochet

5. To lift, you need to knit 3 in. n. and make 15 double crochets

6. Then we knit 2 tbsp in each loop five times. from n.

7. In the opposite direction, we knit 16 tbsp. from n.

8. In the loop we make 3 tbsp. from n., in the next 4 tbsp. from n. and again 3 tbsp. from n.

9. Final row crochet sandals knit like this: 3 in. p. and 15 double crochets

10. We do 2 tbsp. from n. and 1 tbsp. from n. and again the same thing. Then in each of the loops we knit 3 tbsp. s.n. and again 1 tbsp. from n. 2 tbsp. from n. and repeat this moment

11. We knit 16 tbsp. from n. and to complete the heel we knit the same semicircle as on the toe of the sole

12. Begin to tie crochet green thread sole. I do it from the edge where the back will be fixed later sandals

13. We tie to the end

14. We start with three lifting loops, and then we do 5 tbsp. from n.

15. We knit a chain from the 16th century. P.

16. We add 5 tbsp. from n.

17. We knit fasteners for the strap of the 20th century. P.

18. We begin to tie the strap with single crochets

19. Then comes a row of double crochets. Here we make two holes for the buttons. To do this, skip one loop, and above it we make 1 c. n. and continue the double crochets

20. Finishing the Back booties sandals next to single crochets

21. We tie the whole part with green thread

22. We collect a chain of 20 loops

23. We knit three rows of double crochets, this is the upper part of knitted sandals

24. Sew on this part. We tie it with a green thread

25. We knit the sole of the second shoe in the same way. But the back part needs to be slightly changed so that it turns out in a mirror image. To do this, first we knit 20 loops (this will be a strap fastener) we attach with five tbsp. from n.

26. Making the 16th century n. and again 5 tbsp. from n.

28. Sew on the buttons and sandals for the baby are ready. I didn’t have buttons on hand, and I used star-shaped beads that matched the color. I was going to change them to buttons later, but they did their job very well. And I left them. Now we wear these miracle sandals

These sandals are the perfect complement. crocheted or .