Please rate the model/article by clicking on the star. Thanks!

Sizes: 38/40 (42/44) You will need: 300g Brown Melange Fashion Trend Stripe (51% sheep wool, 49% polyacrylic 90 m / 50 g), 50 g each of olive and anthracite, the remains of the white Fashion Trend (51% sheep wool, 49% polyacrylic 90 m / 50 g), 150 g white Sheela (48% sheep wool, 48 % polyacrylic, 4% polyamide, 30 m/50 g); knitting needles No. 6 and No. 7; 3 hook fasteners.

Facial surface: persons. R. - persons. p., out. R. - out. P.

Wrong surface: persons. R. - out. p.. out. R. - persons. P.

Star: embroider with an olive thread with a “loop” stitch, on which 1 cell is 1 p. Knitting density, Fashion Trend Stripe, knitting needles No. 6: 14 p. and 19 p. - 10 x 10 cm.

Back: on knitting needles No. 6, thread Fashion Trend Stripe 64 (72) p. And tie 1 out. R. purl. Then knit faces. satin stitch, while for fitting, reduce on both sides in the 11th p. 1 x 1 p. and in every 4th p. 2 x 1 p. = 58 (66) p. At a height of 18 cm, add 1 p. on both sides and in each 6th p. 2 x 1 p. = 64 (72) p. At a height of 30 cm, close 2 (4) p. for armholes on both sides and in each 2nd p. 1 x 2 and 5 x 1 p. = 46 (50) p. At a height of 49 (51) cm, close the middle 18 p. for the neckline and close on both sides of them in each 2nd p. 1 x 3 and 1 x 2 p. At a height of 52 (54) cm, close the remaining 9 (11) p. of the shoulder on each side.

Left shelf: on knitting needles No. 6, thread Fashion Trend Stripe 31 (35) p. And tie 1 out. R. purl. Then knit faces. stitch, while on the right side, fit and armhole, as on the back = 22 (24) p. At a height of 36 (38) cm, close 5 p. for the neckline on the left side, in each 2nd p. 1 x 2 and 2 x 1 p. and in every 4th p. 4 x 1 p. At a height of 52 (54) cm, close the remaining 9 (11) p. Shoulders.

Right shelf: knit symmetrically.

Assembly: straighten the details of the vest in accordance with the pattern and dry under a damp towel. Embroider in the middle of the shelves, while starting 9 cm from the typesetting edge, with an olive star thread. Run shoulder seams. On the edges of the armholes on knitting needles No. 7, type Sheela thread on 45 (50) p. And tie 3 cm out. stitch, then close the loops. Run side seams. On the lower edge of the vest on knitting needles No. 7, thread Sheela 85 (95) l. and knit 3 cm out. stitch, then close the loops. On the edges of the shelves and the short sides of the lower bar, type on needles No. 7 with Sheela thread 35 (38) p. And tie the bar in the same way. On the neckline, including the short sides of the shelf straps, type 64 sts on needles No. 7 with Sheela thread and tie the strap in the same way. Sew on fastener hooks, the 1st hook under the neckline, the rest with an interval of 10 cm.

ARMLETS

Description of work: knit from top to bottom; for each armlet, type on knitting needles No. 6 with Fashion Trend Stripe 36 (40) p. And tie 1 out. R. purl. Then knit faces. stockinette stitch in the following sequence: 3 cm with Fashion Trend Stripe thread, 2 p. whites. 4 p. anthracite color. 30 cm thread Fashion Trend Stripe, 4 p. anthracite, 2 p. white and 2 p. thread Fashion Trend Stripe. After 15 cm, close for bevels on both sides 1 p. And in each 6th p. 3 x 1 p. * 28 (32) p. After 40 cm = at the end of the sequence of alternating stripes, continue working on knitting needles No. 7 with Sheela thread. First knit 1 persons. R. facial, while evenly subtract 7 (9) p. = 21 (23) p. Then knit another 5 cm with Sheela thread. 1 stitch and close the loops. Embroider in the middle of the sleeves, stepping back 7 cm from the typesetting edge, with an olive thread of a star. Run seams.

Previous models from the section gloves, mittens, mittens

You will need: 50 g of Fashion Trend Stripe brown melange yarn (51% sheep wool, 49% polyacrylic, 90 m / 50 g), 50 g each or the remains of white, olive and anthracite Fashion Trend (51% sheep wool, 49% polyacrylic , 90 m/50 g); a set of stocking knitting needles No. 6.

You will need: yarn DROPS FABEL 50 gr. color no. 100, natural (50 gr / 205 m), 50 gr. yarn DROPS ALPACA color Nr. 0618m light beige (50 gr / 167 m).

The most popular gloves, mittens, mitts section according to user ratings

You will need Silenzio Yarn (50% acrylic, 25% wool, 25% alpaca; 50 g/60 m) No. 00011 Brown: 1000 g for cardigan and 150 g for mitts. Knitting needles No. 6-7 Circular knitting needles No. 5-6. Hosiery knitting needles No. 5-6. 8 oval wooden buttons.

Season: winter.

Hook/needle/fork size: 5.5-6.5.7.

Yarn composition: acrylic, alpaca, wool.

To knit a blue set you will need: 300 g blue No. 641 Alpina GRFTA yarn (50% alpaca, 30% wool, 20% silk, 230 m / 100 g), GAMMA circular knitting needles No. 3.5, GAMMA stocking needles No. 3.5, hook GAMMA No. 3, pin for open loops

Season: winter.

Hook/needle/fork size: 2.5-3.5.

Composition of yarn: alpaca, silk, wool.

Fashion is as changeable as the weather. The jacket bought last year is no longer in trend today. A child at school made a hole, they themselves were not neat, damaged the sleeve, the elastic band in the jacket was stretched. All this is not a problem. By following simple rules, you can hide defects, or restore your favorite thing.

Rules for the correct calculation of loops, rows, increases.

Measure the width of the bottom of the sleeve, at the beginning of the collar, the height of the sleeve. For the correct determination, use the formula:

1. Multiply the width in cm by the number of loops per 1 cm according to the sample = the number of loops cast on to start work.
2. Multiply the length of the sleeve in cm by the number of rows in 1 cm according to the sample = the number of rows for the entire length of the sleeve.
3. Multiply the width in cm before making an okat by the number of loops according to the pattern = the number of loops to the okat lines.
4. For the correct expansion of the sleeve, follow the following step, point 3 - point 2 = the number of loops added. Divide them by 2, get the number to increase on both sides.
5. To correctly distribute the increase along the entire length of the sleeve, divide the total of point 2/ by the total of point 4 for one side. You will have the number of rows through which you need to make an increase.

For any set of loops, you need to know the width of the product and its height. Then, according to the connected sample, with an accuracy of 1 loop, you can make the correct miscalculations by multiplying the width by the number of loops in 1 cm. For the height, multiply the number of rows in 1 cm by the height of the desired product in cm.

The sample is best moistened and dried. The yarn will sit down, the measurements will be accurate, and the knitting itself will be without possible errors.

Option 1

Before proceeding with measurements, you need to flog the old sleeve. Take measurements along the armhole, they are very important for subsequent work. Tie a sample of 10 by 10 cm. Calculate how many loops you will use for 1 cm of the product, rows. Then, along the flogged sleeve, reshoot the pattern and start working on it.

For the correct number of cast on, see the rule. After casting on, knit a 10 cm elastic band. The fabric is knitted according to the desired pattern with an increase in loops for a smooth expansion of the sleeve. At the beginning of the armhole, you need to cut on each side, first 5 loops, then through the row twice 3, three times two, four times 1 loop. The top of the sleeve is formed according to the pattern.

Sew the finished parts and insert into the armhole of the jacket.

Option 2

You can restore the jacket with the help of side inserts, collars, cuffs. To do this, it is necessary to flog all the restored parts. Subtract the number of loops cast on according to the rule.

Tie the workpiece, insert them in place of the plucked parts from the wrong side, pin the seams with pins, sew.

The collar is sewn to the fabric collar and inserted into the seam together.

Option 3

Restoration of a winter denim jacket with knitted sleeves. Be sure to flog the old sleeve. Make a cut out on it. Following the rule, cast on loops, tie a high elastic band. Distribute the addition of loops evenly along the entire length before the start of knitting.

Before the top is formed, the sleeves are cut on both sides of the loop, in the first row 6 on each side, further through the row 4/4/3/2/1/1/1. Upload the sleeve according to the pattern.

The sleeves are sewn together, a heater and lining are inserted. The finished sleeve is sewn to the jacket.

Option 4

Restoration of a straight-cut jacket with a raglan sleeve. Before you start knitting details, you need to flog the sleeves, collar. Reshoot the pattern, take measurements, determine the number of loops to be cast on according to the rule.

After a set of loops, we knit a high elastic band, smoothly add loops until the top of the sleeve begins to form. The reduction is carried out according to the pattern, smoothly on both sides. After the sleeves are ready, they are sewn together. Insert insulation from old sleeves, lining. Finished parts are sewn with a jacket.

The perimeter of the neck is measured. According to the rule, the number of loops for the set is calculated, we knit a high elastic band. In finished form, fold it in half, insert it inside, between the lining and the top layer of fabric, chop off, sew.

At the very end, we insert a detachable zipper.

Option 5

To restore the autumn jacket, you need to flog the sleeve and elastic band. Take measurements, calculate the number of typesetting loops according to the rule.

We knit a high elastic band, after the sleeve itself. Along the entire length we make an increase in loops. We form the top of the sleeve according to the pattern, reducing the loops smoothly on both sides. Connect the knitted sleeve with the lining, sew to the jacket.

Dial loops for elastic. It is knitted high, as it needs to be folded in half before sewing. Sew the finished fabric to the jacket, insert a detachable zipper.

How to knit sleeves for a jacket, a diagram with an explanation

A sleeve with an okon is knitted the same way for all products with an armhole, the difference is only in the size and amount of loops to be reduced. It can be knitted on both circular and straight needles.

How to knit cuffs for a jacket, a diagram with an explanation

To knit a cuff, you need to determine the exact number of loops. Tie a fabric 10 by 10 cm. Count how many p came out per 1 cm. Multiply the cuff width in cm by the number of p in 1 cm. The resulting number of loops is dialed for knitting.

Cuffs according to this scheme can be connected separately. Sew in finished form to the sleeve.

How to knit a hood for a jacket, a diagram with an explanation

New fashion trends offer us a lot of knitted items. These can be sleeves, cuffs, yokes, hoods, back or front details. Any part of a product can be linked.

Today in trend among youth and teenagers knitted hoods. They are quite simple to perform.

The number of loops should correspond to the width of the neck perimeter.

According to this scheme, the neckline is 48 cm. There are 2 sts per 1 cm of medium density, for a total of 48 X 2 \u003d 96 sts. We collect 96 sts on the middle knitting needle, we knit five cm. After that, we begin to add loops, six for each half. At a height of 30 cm of the finished fabric, the addition of loops stops. We knit another 8 cm, cut them in one row. We sew the hood.

We insert the finished product into the seam between the raincoat fabric and the lining, we cut it off with pins, we sew it on a typewriter.

How to knit a collar for a jacket, a diagram with an explanation

A knitted collar is much softer in cold weather than its fabric counterparts. It looks beautiful, emphasizes individuality, image. Such a decorative element perfectly hides all the defects of the collar.

The work is done quite simply. The perimeter of the neck is measured with a measuring tape. According to the sample, the required number of loops is dialed. The fabric must be knitted so high that it covers the entire collar.

For instance:

The length of the collar is 63 cm. There are 2 loops per 1 cm with tight knitting. As a result, 126 loops come out. Gate height 9 cm on one side. There are 3 rows per 1 cm. Total 27 rows for one side. For the total height of the canvas, you need to tie 54 rows.

The drawing can be arbitrary. The finished fabric can be sewn over the old collar. Ideally, flog it and re-sew it with a knitted fabric.

How to knit a yoke for a jacket, a diagram with an explanation

How to knit oversleeves for a jacket, a diagram with an explanation

You can knit stylish and warm armlets both on knitting needles with a fishing line, and on 4 socks. It is best if they are seamless. First, measure the circumference of your wrist and arm according to the desired height of the armlets.

Tie the sample, calculate the number of loops per 1 cm of the product. Multiply one and the second length in cm by the number of loops per 1 cm according to the sample. The resulting quantity will be the first and last row of the product. The difference between the upper and lower loops goes to the expansion of the canvas.

For instance:

The difference of 34 loops is divided by 2. For additions, 17 loops will go on both sides of the armlet. The length of the product is 30 cm. There are 3 rows in one cm, a total of 90 rows are needed per product. For a uniform increase, we knit from below, from above, 11 rows each.

Based on the linked pattern, the number of rows is calculated. They need to be divided into loops for an increase, as a result, you will get a number corresponding to the row for addition.

You can knit armlets in two ways, from top to bottom, from bottom to top. If from top to bottom, the loops decrease. The loops are closed in the first and second case in the same row.

Combining knitting and fabric in clothes, with patterns, diagrams with photos

Option 1

The combined elongated jacket with a knitted back and a hood.

Option 2

Combined jacket, knitted raglan sleeve and back.

For a size 48 back, cast on 138 sts. It is necessary to tie a small piece of 10 by 10 cm to determine the density of knitting. Based on this, the number of loops for the back is calculated. We knit a dense fabric according to a pattern in the form of a raglan. With a measuring tape, measure the volume of the sleeve, cast on loops, tie 20 cm of fabric, proceed to reduce the sleeve. To do this, we cut through a row of 1 loop on each side. We control the length of the cuts according to the desired width of the bottom of the sleeve.

Tie a small canvas measuring 10 by 10 cm. Determine the density of your knitting, how many loops you have for 1 cm. To knit a sleeve, you need to measure the finished armhole, multiply the number of cm of the armhole by the number of loops in 1 cm. the number of loops in 1 cm, the resulting figure will be the loops for the set. After the set, start knitting gum.

The difference between the number of armhole and elastic loops must be divided in half. These loops must be added one at a time on both sides of the sleeve, after 10 cm of elastic and 17 cm of knitted fabric. Calculate the number of additions per 23 cm of canvas. The increase should be even. When the sleeve reaches 40 cm in length, we begin to form an okat, according to the pattern.

The hood is calculated in the same way as the sleeve. We multiply the length of the neckline by the number of loops of 1 cm. We collect them and knit a 28 cm fabric. Next, the fabric must be divided in half. We carry out the reduction of the loops to form a rounding. Rounding 6.5 cm, performed similarly. After the loop, they are divided in half, reduced in pairs on both sides.

With a web length of 37.5 cm, the loops are closed, the web is sewn together. The finished hood is cut off between the fabric and the lining, sewn on the machine.

Option 4

short coat free cut — bat. Combined with knitted wide raglan sleeves on the cuff, with a double collar and sides. Combined belt, fabric - knitted fabric.

The fabric of the sleeves, the sides are knitted large knitting needles minimum number 6.5. Pre-tie 10 by 10 cm, calculate how many loops in 1 cm. Measure the desired length of the sleeve with a measuring tape. Make a calculation by multiplying the width of the sleeve by the number of loops, dial them. Tie 20 cm of elastic, this height is needed for a beautiful lapel. Next, knit along the pattern along the entire length of the sleeve to the shoulder line. The loops close in one row.

Sew the sleeve with the fabric base. On the inside of the bottom of the sleeve, pick up one loop per knitting needle. Tie an elastic band 10 cm.

Use a measuring tape to measure the length of the side along the entire perimeter. Multiply the number of cm by the number of loops in 1 cm. Dial the desired number of loops around the perimeter of the board. Tie 20 cm elastic bands, close the loops. Sew the elastic along the back of the bead.

For the belt, you need to dial loops along its width and tie a long strip, which is subsequently connected to the fabric base, stitched on the machine.

Option 5

Stylish youth jacket with a hood, free straight cut with raglan sleeves.

To complete this model, you need to cut out two squares. The height of which reaches the level of the armpit. Tailor the hood on the lining, cuffs.

Measure the width of the cuffs, multiply by the loops of 1 cm. Dial the resulting amount on the knitting needle No. 6.5. The sleeve is knitted without elastic, immediately according to the pattern. According to the depth of the opening, calculate the number of loops in the same way as for the cuffs. From the amount received, subtract the loops along the cuff. The difference will go to increase to expand the sleeve. Break them up for an increase on the entire length of the sleeve.

Tie the sleeve to the beginning of the connection with the fabric, close the loops. The second one is done in a similar way. Pick up the necessary loops according to the width of the front, tie the top of the product, reducing the loops for the desired neckline. The shoulder parts are knitted even without cuts. A similar action for a set of loops for the back, the neckline does not fit. The back is one-piece, even square.

Gather all the details. Sew front and back pieces, sleeves. Pick up a loop from each row along the edge of the neck onto the knitting needle. Tie a high elastic band, it will need to be folded along the floors and sewn on the back of the product. The elastic band when folded must be at least 10 cm.

Sew a hood to the finished assembled product along the inner seam. Connect lower part sleeves with fabric cuffs.

Conclusion

The proposed options are quite simple to implement. Difficulties can only be with bulk knitting. Therefore, choose simple elements in patterns and feel free to start modeling the old - new jacket.

Coat with short sleeve periodically comes into fashion and becomes one of the most popular styles. According to stylists, these clothes will remain in trend for a long time. What is the reason for such popularity, who needs to immediately include things of this style in the wardrobe and how to combine them with accessories correctly - these questions become relevant on the eve of the new demi-season.

This article will discuss:

Features of the model with short sleeves

Models in fur coats, jackets, coats with short sleeves come out at world shows. Its length can be very different: from ¾ to the elbow and very short. A slight change in style allows the owner to profitably open the fragile part of the hand, this gives the image a special charm, makes it feminine.

The main feature of the model is that the short sleeve shape suggests an elegant looking piece of clothing or allows the use of elongated gloves. Experiments in this direction allow you to create different images depending on the individual preferences of the hostess.

The length of the product can be different: from the short inherent in the jacket, to the longest version. But most often preference is given to the length from the knee and above. The only limitation is that the proposed model more seasonally corresponds to the autumn or spring version. But skillfully combining it with other things, you can wear it in a not very cold winter.

In warm weather, preference is given to models from light fabrics with wide sleeves. Winter short coats are very fond of wearing. The style does not complicate the process of driving, but natural fur always favorably sets off the face and makes it more attractive.

Most often, the style of a coat with a short sleeve is used in models of a straight, A-shaped or fitted style. Decorations in the form of fur, cuffs bring romance to the image and make it more flirtatious.

The sleeve can be of different cut, flashlights, kimono cut, and cuffs are allowed, as an option for decoration. Depending on the features of the figure and style, each woman has the opportunity to choose the most successful style for herself.

Who is this coat for?

There are no restrictions on age, figure or style of clothing when choosing a style. This silhouette looks good on both tall thin girls and small tight ladies. According to stylists, the ¾ sleeve length stretches the silhouette, which will allow women of small stature to include in their wardrobe.

A successful feature of the style is the ability to hide the upper, fuller part of the arm, and it is advantageous to open the lower, thinnest and most elegant, in the wrist area.

What to wear with a coat with short sleeves?

A coat with a ¾ sleeve harmoniously fits into any style, the only exception is pure sports. This model well complements office clothes and serves as an addition to evening dress.

The semi-open arm length allows the hostess to experiment and create new images through the use of sweaters and turtlenecks in the set. But at the same time, it must be remembered that not every wardrobe item will go well with such a coat. Here are some tips for choosing:

• The model in its execution is filled with romance and coquetry. Its combination with baggy clothes and coarse shoes is highly undesirable.

• Pay special attention to the part of the clothes under the coat. It should organically fit and match created image. When choosing a jumper, sweater and turtleneck, it is necessary that the things are narrow and blend well with the tone of the outerwear. You can simplify your choice of wardrobe and wear a coat in combination with long gloves.

• Take a closer look at the asymmetrical clothing options, they will not only hide the fullness of the arms, but also stretch the silhouette, draw increased attention to the hostess.

• To create a stylish bright look, experiment and add things with sleeves made of transparent materials to your wardrobe - this is good combination for warm early autumn and spring.

Combination with other things:

• As a bottom, a variety of things fit well into the image: leather shorts, trousers, jeans and skirts, dresses, including knitwear.

• A coat with a short sleeve looks perfect with tight-fitting clothes: leggings, turtlenecks.

• The most popular style is the model in the style of the 60s of the last century, decorated with a small collar and having a slightly shortened sleeve. In this case, there is no need to wear long gloves.

• A classic all-round look that's perfect for any occasion is paired with a simple-cut outerwear with a hat, ankle boots and a classic bag to match the coat or in a contrasting hue.

Shoes, bags, accessories

There are no special restrictions on the choice of shoes. Rough models resembling are not welcome. Any women's shoes, especially if it is a stable heel or stiletto heel - it will fit perfectly. The main thing is that it matches the season.

Among the accessories that look good in the kit, it is worth highlighting long seals or. Their addition will create the image of an aristocratic lady. You can make the set more daring with long gloves with cut off fingers -. The color should match the tone of the outerwear or be in contrast.

In addition to the traditional black, brown and beige, take a look at the burgundy and red. If black makes the set strict, then colored gloves can become its main element. As a material, ordinary or patent leather, fabric, preferably with a pile, are suitable.

Young ladies have a lot of room for experimentation, you can bring a neckerchief into the ensemble, close the lower part of the arm with knitted armlets or leggings. Such a rough detail adds insecurity to the young fashionista.

Big additions look good in the kit:

• unusual shaped clutch,
• large shopping bag
• wide bracelet or large watch.

The only limitation when choosing accessories is to observe the measure, there should not be too many of them.

¾ sleeve coat for fall 2019

One of the main trends in 2019 is related to length and style. On the podium there are models both without sleeves at all, and with their shortened length. The most popular are fitted, straight and flared silhouettes.

The emphasis is on cuff decoration or expansion to the bottom. The latest model, which helps to hide the excessive thickness of the hands, will appeal to a woman with a similar feature.

The armlet is not only functional, but also a decorative item of clothing. It can be pulled over a sweater and knitted mitten additionally protecting hands from the cold. Tastefully made products interestingly complement not only outerwear, but also holiday outfits with a shirt or blouse. They are often knitted together with fashionable poncho capes and leggings. Try to make both casual and dressy knitted armlets - it won't take much of your time and a large number material.

You will need

• - single-color yarn (optional - a combination of different colors);
• - knitting needles straight or circular;
• - centimeter;
• - needle;
• - sewing machine, lace braid, paper and a pencil for a pattern or a hook (optional).

Instruction

1. You can knit armlets both with straight knitting needles and in the round. First, calculate the density of knitting and make a test strip with a 2x2 elastic band (two front loops, then two wrong ones).
2. Try on an elastic band on your hand to calculate correctly required size. Measure the thickest part of the arm; consider future clothing under the armlet, as well as the estimated length of the product. In order for the thing to warm the hand well and look stylish, it is recommended to make it no shorter than 20 cm.
3. Tie a fabric with an elastic band right size in straight and reverse rows, then bind off the loops of the last row.
4. Sew the connecting seam of the sleeve on the wrong side of the piece. When working in circular rows on five stocking needles, you will get seamless products.
5. You can knit armlets in the same style with homemade ponchos, sweaters, leggings, hats, etc. In this case, perform the upper edge of the thing with an elastic band (1x1 or 2x2), tying it about 5 cm in height.
6. Then knit the product with the selected pattern, while in front rows it is necessary to make uniform increases according to the individual size.
7. At the bottom of the sleeve, decrease the loops (corresponding to the number of increases at the beginning of work). Tie the product with an elastic band.
8. Another option for expanding the fabric of armlets is to make bevels on both sides. For example, you initially dialed 47 loops on straight knitting needles. Make short rows, starting with the middle five loops.
9. Enter in every second row (on the right and left sides) seven times in three loops.
10. When you have finished 14 rows, start making bevels. To do this, in every tenth row, it is necessary to add eight loops on each side of the sleeve. As a result, you will have 63 loops.
11. After 96 rows from the beginning of the product, make an elastic band of the desired height and close the loops. You just have to complete the side seams on the finished armlets.

At the height of poncho fashion! It is waist-length, with expressive patterns, and a high ribbed collar. Knitted poncho is complemented with long mitts.

Size: 36/38

You will need: 750 g of gray yarn

Merino 70 (100% merino wool, 70m/50g); long and short circular and stocking knitting needles No. 7. Attention! Because of a large number loops in front and on the back, knit with straight reverse p. on circular needles.

Elastic band, straight and reverse r: after a set of loops, start 1 out. R. and knit as follows: chrome., * 1 out., 1 person., repeat from \ 1 out., chrome. In faces. R. knit loops according to the pattern.

Relief pattern (from 159 p.): Knit according to the scheme, which shows only faces. r., in out. R. knit all loops according to the pattern or, as indicated in the legend, persons. cross n. knit out. cross and nakida knit out. The diagram shows 1/2 front with a central oblique. Knit 1 time all the loops of the scheme with a central braid, then symmetrically knit the 2nd half without a central braid, i.e. from the central braid, read the loops of the scheme from left to right, perform all crossings, as in the 1st half. Tie 1 time from the 1st to the 80th p., On the central braid 1 time from the 1st to the 12th p., Then repeat from the 9th to the 12th p. Elastic band, circular p: alternately 1 person., 1 out.

The central braid (of 5 p.), circular pj knit the last 5 p. of the scheme, on which only odd circular p. are shown, in even circular p. knit all loops according to the pattern, knit knit faces. Link 1 time from the 1st to the 12th circular p., Then repeat from the 9th to the 12th circular p. Knitting density. Relief pattern: 18 p. and 24 p. = 10 x 10 cm; an elastic band with a scythe (measured in an unstretched state): 18 p. and 22 p circular p. = 10×10 cm.

Knitted poncho

Poncho knit in 2 parts, each time start from the bottom edge. An oblique central seam is obtained due to decreases.

Front / back: on long circular knitting needles, dial 159 p. And tie 2 cm = 5 p. rubber band. Then knit between chrome. embossed pattern, while for the cape, reduce before and after the central braid, as indicated. After 31 cm = 74 p. from the elastic close to the bevels of the shoulder on both sides of the loop, as indicated, while closing the chrome. together with the first 4 p. Through 33.5 cm = 80 p. set aside the remaining 61 sts from the elastic for the collar. Assembly: perform shoulder / side seams. On short circular knitting needles, transfer the pending collar stitches and knit on all 122 stitches in circular p. rubber band. At a collar height of 14 cm, close all loops according to the drawing.

ARMLETS

Left sleeve: cast on 42 sts, distribute them on stocking needles (= on 2 knitting needles of 10 sts and on 2 knitting needles of 11 sts), conclude the work in a circle and knit as follows: 37 sts of elastic band, starting and ending with 1 out., 5 p. of the central braid. After 29 cm = 64 circular p. from the inlaid edge split for slots thumb work between the 29th and 30th p. from the beginning of the circular p., tie in the pattern with straight and reverse p. 6 p., Then again conclude the work in a circle and continue to knit in the pattern. After 35.5 cm = 78 circular p. from the inlaid edge, close all the loops according to the drawing.

Right sleeve: knit in the same way, but for the slots of the thumb, divide the work between the 8th and 9th sts from the beginning of the circular p.