Newspaper is a great material for making a hat. A newspaper cap, panama or hat will always protect your head from the sun or during repairs. Simple and understandable diagrams products from the newspaper are presented in this article.

idea to create newsprint hats originated in the days of the USSR. At that time, people tried to invent disposable item from improvised means.

Newsprint, as it turned out, easy to fold and model. From it you can very quickly build a hat, a hat, a visor and even a cap.

It is worth knowing why, in fact, such hats:

• Newspaper hat can easily replace a headdress on a hot sunny day: at a parade, on a hike, in a pioneer camp, in any case, in the open air. A newspaper cap will not allow direct ultraviolet rays to penetrate through itself and worsen a person’s condition, as well as overheating.
• Visor or hat made from a newspaper will help any person during the repair of an apartment or house. The fact is that any kind of repair work: puttying, whitewashing, wallpapering, plastering, is associated with liquid building materials. Often you have to work with high surfaces and ceilings. So that any building material does not get on the head, does not spoil the hair, as well as the face, a “quick” headdress is made from the newspaper. Such a cap will reliably protect the hair and it is not a pity to throw it away after work.
• Hats, caps or caps serve as a wonderful decorative ornament. Such products can be painted with artistic paints, to give an aesthetic appearance. After that, the item can be used for installations, stage performances, other creative ideas, games.

Types of hats from the newspaper:

DIY hat made from a double sheet of newspaper

DIY newsprint visor

Newspaper headwear is an indispensable thing for children and adults

A variation of newspaper head cap for any occasion

Getting creative with newspaper headwear

How to make a repair hat out of a newspaper: addition scheme

As already mentioned, a hat for head protection during repairs- an irreplaceable thing. It can be worn by both women and men. Tight folding of the paper will not allow the hat to turn around or lose its appearance throughout the working day.

To make a hat follows from the most ordinary, thick newspaper. You can also use several sheets of newspaper to make the product thicker. A quality sheet of paper will allow you to create "hard" product.

A newspaper cap will protect the head and hair of a person during repair work from dirt

The schemes will help to make the correct and neat hat for repairs:

Newspaper hat for repairs, scheme No. 1

Hat from a newspaper for repairs, scheme No. 2

Hat from a newspaper for repairs, scheme No. 3

How to make a cap with a visor from a newspaper: diagram

Cap with visor can be a replacement for a headdress for a child or an adult. To this way to protect the head from bright sun kindergarten teachers and teachers often come running to keep a child safe without a real cap or panama hat.

Every adult should know the schemes of the product, because at any moment such an unpleasant situation can happen to him. Always a must have a way to protect yourself and loved ones from the bright and scorching sun.

Schemes for creating a newspaper visor for the head:

Visor from newsprint, detailed diagram No. 1

Visor from newsprint, detailed diagram No. 2

Visor from newsprint, detailed diagram No. 3

How to make a cap from a newspaper?

Cap from the newspaper- This is the simplest headdress that can be made from improvised materials. For this, a newspaper or even the most ordinary landscape, notebook paper can come in handy.

Depending on the size of the cap, it can be used as:

• Sun protection for children and adults
• Protection against head contamination during repairs
• Decorative element or attribute of a stage performance

Detailed schemes will help to make a beautiful neat cap:

Cap from the newspaper, understandable and simple circuit product execution Scheme of a classic cap made of newsprint

It is very easy to make a cap from a newspaper

How to make a panama from a newspaper: addition scheme

Panama from the newspaper- this is another version of the headdress various applications. It differs in that it has small fields, able to give a shadow on the eyes or protect against drops.

It takes a double big leaf whole newspaper and the correct scheme.

Schemes for creating panama from a newspaper:

Detailed scheme folding newspaper for panama

Panama from the newspaper, product diagrams

How to make a pirate hat out of newspaper?

pirate hat from the newspaper It is primarily a decorative element. Such a hat, of course, can be used for your "useful" purposes, but you are unlikely to want to spend a lot of time on needlework in extreme conditions.

Schemes for creating a "pirate hat" from a newspaper:

Pirate hat on head made from newspaper Pirate hat from a newspaper, execution scheme

How to make a cowboy hat out of newspaper?

Beautiful newspaper cowboy hat is a real work of art. To make the product strong, it can be superficially coated with a paste (a mixture of flour and water, home-made glue) or PVA glue. After that, artistic paints are used, which can give the product a realistic look and volume.

IMPORTANT: When creating such a hat, you may need not only glue, but also a stapler!

Cowboy hat made from newspaper

Diagram of a cowboy hat from a newspaper:

You can make a hat out of newspaper

Video: "Cap from the newspaper"

In our life there are situations when we need a headdress not for the sake of beauty. One that you don't mind throwing away. For example, they found themselves under the scorching sun in the country, on the beach, or maybe they started repairs in the apartment. Take an old newspaper and fold an origami hat. Today I will tell you how to make a hat from a newspaper.

First, let's decide on the size. As you know, newspapers come in different sizes. For example, size Russian newspaper"Pravda" 594 mm by 420 mm. Local newspapers sized 297 mm by 420 mm are dropped into my mailbox. These are the most common options. Let me remind you that the size of the newspaper is determined by the size of the newspaper page. If the hat is intended for an adult, then it is worth taking a larger newspaper, and a newspaper measuring 297 mm by 420 mm is enough for a child.

We lay out the newspaper in front of us, so that the fold is located at the top. We bend the upper right corner to the center of the newspaper page. Fold the top left corner in the same way. At the top we have a triangle. And at the bottom is a narrow rectangle.

Bend the rectangle up and bend the left and right corners.

We turn over the newspaper figure and again bend the rectangle up and bend the corners.

We combine the left and right lower corner of the triangle. Our triangle is transformed into a square. Run your fingers along the fold lines to fix them.

The resulting square consists, as it were, of two squares connected by two sides. We unfold the figure so that these sides are located at the top.

We combine the lower corner of the square with the upper one. We turn the figures over and again combine the lower corner with the upper one. It turned out a triangle.

We transform the triangle first into a boat, and then into a hat. We add sharp corners as in the figure. Slightly crush the top of the head. We straighten the "visor".

To prevent the corners from unbending, they can be fixed with glue, a stapler, or a thread with a needle.

You can make such a hat not only from a newspaper, but also from any paper that is suitable in size (a sheet of graph paper, tracing paper, and even an old drawing paper).

If you only have small newspapers on hand, and you want a hat for an adult, then take 2 newspapers. Unfold them and lay one on top of the other, long side down. We immediately press the right corner of the two newspapers to the fold line. Then, similarly, we fold the left corner of the two newspapers. Next, add up according to the technology described above. The resulting hat will serve no less faithfully.

Not so often you can find in origami a model that will take one or another final form, depending on whether

in what order certain operations will be performed. However, such models exist, and one of them is now in front of you. This is a paper hat from a newspaper, which can have several varieties.

This hat can be first a cocked hat, then a skullcap, a jester's cap, an academic cap and, finally, a bishop's miter.

To make all these varieties of paper hats, take a large sheet of newspaper folded in half. Do not forget that the "range" of paper hats is not exhausted by the indicated models and nothing prevents you from inventing your own kind of headdress folded from yesterday's newspaper.

All it takes is a little creativity and imagination.

1. To begin, fold the newspaper in half, bringing the short edges together. Then fold in half again (four times) and unfold, thus forming a central vertical crease.
Making sure the folded edge newspaper sheet at the top, fold both top corners of the paper down along the vertical center line.

2. Fold forward and upward the bottom edge of the newspaper (only one layer of paper) and place it along the bottom edge of the triangular flaps folded in step 1.

3. Fold the bottom strip of paper up again.

4. Turn over the model.

5. Bend both outer edges inward towards the vertical center line.

6. Fold the bottom edge of the model along the bottom edge of the rim created in step 3.

7. Unfold the fold made in step 6. Fold the outer bottom corners inward so that their edges are aligned with the horizontal fold made in step 6.

8. Bend back lower part model up by bending it over the straight edge of the rim made in step 3.

9. Referring to the horizontal crease made in Step 6, fold the end of the strip into a raised crease inside the pocket behind the straight band made in Step 6. Smooth out the model.

10.Operation 9 is completed.

11.Fold the top corner to the bottom edge of the model and thread it under the rim made in step 9.

12. Open the bottom edges of the hat by slightly pressing on the top fold to do this. Straighten the bottom edges of the hat and round them a little.

13. Your cocked hat is ready.

14. Turn the model over. Pull the front and back sides of the hat in opposite directions.

15. Fold the hat into a diamond shape.

16. Having horizontally in front of you the edges of the upper and lower rims of the hat, bend up, towards the center, the lower corner, and insert it under the lower rim.

17. Repeat step 16 with the top corner of the hat.

18. Open the center slot with your fingers by pulling the straight rims of the tire in opposite directions.

19. Using the thumbs and forefingers of both hands, pinch the arrow crease around the existing crease lines, giving the hat a rectangular shape.

20. Turn the model over. The skullcap is ready.

21. Pull out the two triangular flaps from under the rims (you will fold them during operation 16 - 17) and leave them hanging down freely. Now you have a jester's cap.

22. Pull out the triangular flap folded in operation 11 and straighten all three corners so that they are in the same plane with the central part of the hat. You have an academic hat worn by professors and bachelors.

23. Take hold of the sharp corner released in step 22 with your hand and lift it up, allowing the paper to open a little more.

24. Bishop's miter in finished form.

If there is a repair or a costume party ahead, then a paper hat will be more than ever welcome. Learning how to make a paper hat is not difficult at all. A few minutes of training, a drop of imagination and you're done! In addition, making origami is a great activity for spending time together with children.

There are many instructions for making hats. Whether it's a cap, a skullcap, a cowboy hat or a samurai helmet - following the diagrams, it will not be difficult to fold them.

What you need to make a paper hat

To make a hat out of paper, first of all, you need to prepare a place to work, materials and tools.

It will be most convenient to sit at a table with good lighting. There should be enough space to spread out a sheet of paper and a little more.

For some models of hats, only the material itself is needed for work - paper. For others, you will need to prepare in addition the following:

• scissors;
• glue;
• paints and decorations;
• ruler, pencil;
• compasses or something round that can be circled, right size.

You should immediately clarify what is needed for work so as not to interrupt the creative process.

What paper can be used to make a hat

Paper hats are good to make in that you can use almost any large enough piece of paper that you have on hand as the base material, for example:

• full spread of the newspaper;
• a sheet of A4 cardboard;
• a piece of paper wallpaper;
• office or landscape paper;
• colored paper or cardboard.

Important! Do not take paper that is too thin or soft - it will not hold its shape.

How to make a newspaper hat: step by step guide

The easiest hats to make are newspaper hats. They are usually made to protect the head during repairs or painting work, as well as to shelter from the sun while relaxing in the country or in nature.

These hats are made using the origami method, that is, by folding the paper according to the pattern without the use of glue and scissors.

Consider how to fold the most popular newspaper hats.

How to make a painter's hat from newspaper

During painting work, there is a risk of staining the hair with paint. Most easy way to avoid this - make and put on a cap from the newspaper.

It is made from a newspaper sheet as follows:

1. Bend the sheet lengthwise, thus marking the middle. Expand.
2. Lay it across.
3. Bend the top corners from the middle. An unused strip will remain below.
4. Fold the bottom strip in half. unbend.
5. Bend the top layer of the bottom strip end-to-end with folded corners.
6. Make another twist. Turn over the workpiece.
7. Bend the sides, thereby adjusting the size of the future cap.
8. Turn the workpiece over again and bend the top corner to the bottom line. Also bend the corners of the first gate. This will result in three triangles and a bottom stripe. If the upper triangle is too large, you can bend it to the desired level, and tuck the excess inward.
9. Bend the corners of the bottom strip.
10. Fold it in line with the bottom of the cap.
11. Bend the top edge inward, fixing the top corner and the side.
12. Give the dress volume.

Such a cap can be made from a sheet of paper, color it and make the corresponding paper badges. You get a pioneer, army and sailor cap.

Newspaper repair hat

During the repair, construction dust, plaster strives to settle on the hair. To prevent this, you can make a simple boat hat from a newspaper.

And it is simple precisely because it is really very simple to fold it:

1. Fold a sheet of newspaper in half. Mark the middle longitudinal line of the sheet by bending it in half lengthwise.
2. Considering the top of the fold of the sheet, bend the upper corners to the middle line.
3. Bend the bottom strip outward butt to the bottom line.
4. Bend the bottom corners of the lapels.
5. Turn the lapels up from the outside.
6. Pull the center points of the bottom. Get a square.
7. Bend the bottom corners outward, bending along the line slightly below the center of the square.
8. Again, pull the center points of the bottom.
9. Once again, bend the lapels outward.
10. Grasping the corners, spread them apart.
11. Give volume to the hat.

Having learned how to make such a headdress, you don’t have to worry about your hair during any dirty work.

How to make a hat with a visor from a newspaper with your own hands

Another interesting option for a headdress from a newspaper is a cap.

It is also made by folding paper without the use of scissors and glue as follows:

1. Fold a sheet of newspaper in half. Bend the top corners, closing them in the middle.
2. Fold one of the bottom strips in half.
3. Bend it outside, forming a side.
4. Turn the workpiece over and bend the protruding corners of the side. Bend the sides, forming the size of the future cap.
5. Fold the bottom strip up to the bottom line.
6. Bend the bottom corners.
7. Fill the free corners of the bent triangles inside the side.
8. Turn the workpiece over and bend the top corner.
9. Fill it under the side.
10. Straighten the cap and give it volume.

Such a cap can be worn on a sunny day somewhere in the country.

How to make a paper hat without glue: diagrams and description

For children's holiday or masquerade parties, you can make original paper hats. However, some models can be folded without the use of glue and scissors. You need to take a tight colored paper or color it at the end with paints and applications.

Paper skullcap

To create an oriental image, you can make a skullcap. To do this, you need a square sheet of paper with a side equal to 40 cm. Next, you need to fold it according to the scheme:

1. Fold the sheet in half.
2. Bend the top corners at some distance from the middle.
3. Fold the lower part of the top layer in half to the level of the wrapped corners. Then wrap again.
4. Turn over the workpiece.
5. Bend the sides.
6. Wrap the lower part in the same way as in step 3.
7. Straighten the skullcap, give it volume.

The final chord will be decorating the hat in an oriental style, for example, with bright stripes.

Paper hat with brim

Kids will love the cowboy hat with paper brim.

It is also made in the origami way as follows:

1. A rectangular sheet of paper is folded in half.
2. The resulting rectangle of dreams is folded in half and unfolded back. This is how the middle is marked.
3. The upper corners are bent to the middle line.
4. The lower part is folded in half to the line of folded corners. The action is repeated on the second side.
5. A second fold of the lower part is made on both sides. Next, the workpiece is stretched for the central points of the lower edge.
6. At the resulting square, wrap the lower corners on different sides of the workpiece diagonally.
7. Expand the resulting triangle again by pulling the center points of the bottom.
8. At the new square, pull the upper corners and unfold the hat.
9. Add volume to a cowboy hat.

Important! When breeding corners at the final stage of creating origami, you should not do this until the very end. Otherwise, a cowboy hat with a brim will turn into a boat with high sides.

The finished headdress can be decorated with the sheriff's badge, as well as attach a lace to attach the hat to the head by inserting it into small holes.

paper samurai helmet

For a children's holiday, a young warrior can make a samurai helmet.

To make a helmet, you need a square sheet of paper. To make the product more original, you can take paper with sides different color. You need to make a headdress according to the instructions:

1. Fold a square sheet of paper diagonally. Unfold and fold again along the second diagonal.
2. Bend the sharp corners of the triangle, closing them end-to-end.
3. It turned out to be a rhombus. Bend up the lower corners of the upper layer of the workpiece.
4. Bend the corners raised up symmetrically on both sides.
5. Bend the lower part of the top layer along the line just below the line of the future bottom.
6. Bend the strip of the lower part over the bent corner.
7. Turn the workpiece over and bend along the bottom line.
8. Give volume to the helmet.

Thus, making a samurai helmet without glue and scissors is also not difficult.

What paper hats can be made with glue

In addition to origami hats, there are many models of paper hats, for the manufacture of which you will need additional glue, scissors and a pencil. Such hats are made a little longer, but the result will not disappoint.

Funny top hats, paper caps or cowboy hats can be worn on children's party, new year party or just to create a good mood.

paper cylinder

The young gentleman is sure to love the paper top hat.

To make it, you need a sheet of colored paper. You can take a package. As well as a thick A4 paper or cardboard sheet, scissors, glue, paints, a pencil, two circles of different diameters.

After preparing everything you need, you can get to work:

1. Cut a strip from a colored sheet. The width of the strip is the height of the future hat, the length is equal to the circumference of the cylinder.
2. Roll the strip with a pipe, glue it.
3. On a sheet of cardboard, draw two circles of different diameters with a common center. The inner circle should be equal in diameter to the glued pipe. The difference between them is the width of the fields of the cylinder.
4. Color the resulting fields and cut out.
5. At the pipe, cut the lower edge with a fringe depth and a width of 1 cm.

At this stage, all the details are ready, it remains only to connect them. To do this, the fringe of the pipe must be bent outward, put a cut ring on the pipe and glue the fringe along its underside.

On a note! For a neater look, you can cut out the second ring and glue it on the bottom, covering the fringe.

You can diversify the hat with additional funny decor.

Paper cap

A paper cap will appeal to both boys and girls.

The girlish version can be decorated with artificial flowers or appliqués.

In addition to decorative elements, to make a baseball cap you will need:

• thick paper;
• rivet;
• scissors;
• pencil;
• glue;
• hole puncher.

The cap is made as follows:

1. Prepare a pattern for 6 or 8 sections of the desired size. Transfer details to paper material.
2. Cut out the main part of the hat.
3. In the corners of the sections, make one hole with a hole punch.
4. Align holes.
5. Insert a rivet into all holes.
6. Secure it by spreading the paws in different directions.
7. Glue the tail to the sidewall.
8. Cut out the visor piece.
9. Bend her fringe.
10. Spread with glue.
11. Glue on the inside of the main part of the cap.

And here is the baseball cap. You can move on to decorating it.

Paper cowboy hat

An origami cowboy hat is suitable for a home party or everyday game. For a more serious event, it is better to make a hat more serious.

To do this, you need to prepare:

• thick paper;
• toilet paper;
• PVA glue;
• brown paint;
• laces;
• pattern.

The pattern looks like this:

Having adjusted it to size, the details are transferred to paper and cut out. Additionally, the bottom is cut out in the form of an internal oval of the fields with a fringe for connection. Then the parts are glued together: first the fields with the crown, then the bottom is glued.

The hat is almost ready. It remains to give it some unevenness to make it more natural. To do this, cover the entire upper surface with glue and stick toilet paper in pieces. You should get a light drape.

It remains to paint with brown or black paint. The child will be delighted!

In order for the result of creativity to please, you should listen to a few tips:

• proceed to creative work you only need to be in a good mood;
• it is worth taking a responsible attitude to choosing a place for creativity: nothing should interfere, there should be enough places and light;
• when working with paper, it is necessary to monitor the cleanliness of hands so as not to leave marks on the product. If you have to deal with glue or paints, it is better to immediately prepare wet and dry wipes;
• you need to remember that scissors are a sharp tool, you should not leave children with them unattended;
• before folding life-size origami, you should practice on the "draft" - unnecessary sheet paper;
• to make a homemade hat look good, all lines and folds must be neat and symmetrical.

In the summer, be sure to wear a hat that covers your head from the hot scorching sun. But sometimes situations arise when there is no cap at hand before going out, so you should know how to make a paper hat from a newspaper, which is always found in every apartment. The ability to create such crafts always turns out to be useful occupation both in terms of practical use, and with the aim of developing creative and handicraft skills for the child. In this article we will look at how to make a hat from a newspaper with your own hands.

Paper cap

In order to independently start creating a headdress from pieces of paper, you must first prepare the following components:

• paper - newsprint is better, but with good print quality;
• glue;
• decorative elements that will be useful when decorating the product (optional).

1. We prepare a sheet of paper. Depending on the size of the head circumference and the future headgear, you can choose the format of the sheet, both larger and smaller. For training, you can use a regular sheet of A4 format, so that later you can make a beautiful hat from a newspaper.
2. Fold the paper in half along the long side.
3. After that, it is necessary to fold the material for manufacturing half again along the long side, and then straighten it. As a result, a clear fold line should be visible.
4. Then we carry out the bending of the right and left upper corners of the work sheet to the viewed fold line.
5. At the bottom there is a piece of paper that has a rectangular shape. Its upper part must be wrapped up, and the lower section must be bent back.
6. For a tighter fixation of the edges of an already practically made headgear, you should bend the corners of the “lapels” onto each other.
7. At the end of the manufacturing process, it is necessary to carefully straighten the created product.

The headpiece is ready and can be worn in hot weather!

Paper cap

If you don’t like the cap, familiar from childhood, then you can always fold a more interesting cap model from a paper sheet.

Important! For an adult, a double-folded standard newspaper spread (A3 sheet) is more suitable.

There can be many options for this origami, but we suggest considering how to make a cap with a visor from a newspaper or magazine.

To make a headdress from a newspaper with your own hands:

1. Lay the sheet with the long side towards you (the fold of the newspaper sheet should be on top).
2. Bend the top right and left corners of the newspaper to the middle so that a triangle forms.
3. The lower part of the magazine (rectangular strip) will remain free. Bend its upper part up so that it does not find the triangle, but goes back to back with it.
4. After that, bend the resulting strip up again - now it will already find a triangle.
5. Turn the item over to the other side.
6. At the bottom, we still have the second half of the rectangular strip intact. Two small triangles are visible on the sides of it - bend them towards you.
7. Now tuck in the middle of the edges of the product on the right and left sides.
8. Bend the lower rectangular strip up so that it goes butt-to-butt with the sides of the cap folded in the previous step.
9. Make small folds of the bottom strip on the sides, forming the visor of the hat.
10. Fill them under the envelope formed on the product.
11. Turn the origami upside down.
12. Bend the upper part of the craft down and tuck it under the “lapel”.
13. Once again, smooth and carefully open the cap. The edges of the cap on the right and left stick out, and therefore it is better to bend them and tuck them under the “lapel”.

Important! If you want to make a hat out of a newspaper elegant, then decorate it with decorative elements or paint it with paints. Or at the very beginning, you can take not a newspaper or magazine, but the desired format of colored paper.

Our craft is ready. You can try on an accessory!

footage

That's how easy you can create a headdress in any situation that will protect your head from the scorching rays of the sun. Do not forget about the precautionary measures in the hot season, because their non-observance is fraught with big health problems!