Crochet knitted daisy will interesting decoration for various things, it can be used as a brooch, bracelet, as an element of a necklace. You can decorate your hair with a flower. How to knit a chamomile can be found in our article containing detailed descriptions and photo.

How to crochet a camomile - a detailed master class

We need:

• threads "Iris", white, green and a small amount yellow flowers;
• hook number 0.7;
• green wire;
• the base for the brooch;
• needle with a large eye.

Description

Petals

See master - class: f.1 - f. 9.

We collect a chain of 13 air. p. In 3 from the hook p. tie 1 stlb s / n, then the scheme is as follows: 1 stlb s / n, 7 stlb s / n, 1 half stlb s / n, 1 sbn (f. 1). We turn the knitting and perform the tying of the connection in a circular manner. stlb (f.2). At the turn, in the end point, you need to tie 2-3 stb so that there is no contraction. This is the first petal.

We do not cut the thread, we knit the next one directly from this petal. We collect a chain of 13 air. item (1.3) The knitting pattern is the same as for the 1st petal.

We use the same master class for knitting the rest of the petals. In total, you need to connect 15 pieces. We get such a garland of overlapping petals (f.5).

We knit 1 VP of the rise. We fasten the left half of one petal with the right half of the previous one, knitting RLS along their base. We get 15 stlb w / n. In conclusion, we close the garland of petals in a ring and continue to knit the STBN, making decreases at equal intervals. Having completely closed the middle, we finish knitting (f.9). Calculated reduction scheme:

• 1p .: (1 stlb b / n - 1U) x5 times;
• 2p .: 5 U.

Master - class on the technique of performing reductions: we introduce a hook under two half loops of the previous stlb. p., we take out the thread, we do not knit, we introduce a hook under two half-loops next. stlb, take out the thread, knit all 3 sts on the hook.

Yellow heart of chamomile

See master - class: f. 10-lb. 12.

The part is knit in a spiral RLS, increasing the number of items: 6 → 12 → 18 → 24.

The hook must be inserted under two half-loops. We do the addition by knitting the previous one from the loop. R. 2 sc:

• 1p.: Tie 6 sc in the amigurumi ring;
• 2p .: +6 additions;
• 3p.: (+1 arr., 1 PRS) x6 times;
• 4p.: (2 sc, +1 arr.) X6 times.

Cut off the thread, leaving a long tail. We need it to sew the core to the petals (f.11). Before the last stitches, we put a little filler under the middle (size 12). We bring the thread to the wrong side, fix and cut.

Leaves

See master - class: f. 13 - f.15.

We collect 22 VP. We skip 2p., In 3 from the hook we knit 2 pillar. without nak., 3 half columns. with nak., 10 pillar. with nak., 3 half-columns. with nak., 2 pillar. with nak. (f. 13). We turn the knitting, apply a wire 25 cm long and knit around the perimeter, tying the wire:

• 2 pillar b / n, 1 half pillar. with nak., 1 CCH, 2 air. n., 1 connection. pillar. at the base of the last stb;
• 1 post. b / n, 1 pstlb s / n, 1 pillar. s / n, 1 CC2H, 3 air. n., 1 connection. pillar. at the base of the last stb;
• 1 post. b / n, 1 pstlb s / n, 1 pillar. s / n, 1 CC2H, 1 CC3H, 4 air. n., 1 connection. pillar. at the base of the last stb;
• 1 post. b / n, 1 pstlb s / n, 1 CCH, 1 CC2H, 3 air. n., 1 connection. pillar. at the base of the last stb;
• 3 sc, at the end tie 2-3 sc, 3 sc;
• 1 СБН, 4 ВП, 1 StS / 3n in the base of the chain from ВП, 1 column with 2 nak., 1 CCH, 1 semiStSN, 1 СБН;
• 1 RLS, 3 VP, 1 StS / 2n in the base of the chain from VP, 1 column with a nak., 1 semi-stSN, 1 RLS;
• 1 RLS, 32 VP, 1 StS / N in the base of the chain from VP, 1 half-column with nak., 2 RLS.

Using this master class, knit 2 more smaller leaves. For them, we recruit the original chain from a smaller number of VPs and reduce the height and number of teeth on the sheet.

Bud

See master - class: f. 16- f.24

We knit like a flower, but with shorter petals: we collect the original 10 VP. In addition, for more graceful petals of the STSN and semi-STSN, we replace the RLS, reduce their number: we knit 13 pcs.

The scheme of increments for the core: 6 → 12 → 18. For the green cup: 6 → 12 → 18 → 24. We sew the core onto the flower. We pass the flower from below with a wire 25 cm long, bend it in half (size 19).

We string a cup on the wire, attach it to the petals (f. 21).

We fasten a green thread to the base of the cup and tightly tie the wire - the RLS stem to the desired length (f. 23).

In the course of the process, we attach a small leaf to the stem (f. 24).

We knit a cup 6 → 12 → 18 → 24 → 30 → 36 (f. 25).

After the 5th p. we connect the stem, we knit 2-3 columns without nak., we connect a leaf, we knit 2-3 columns without / n., we connect another leaf, we finish the row.

We fasten and cut the ponytails of the threads on the seamy side. We twist the ends of the wire into a common bundle and put it in a ring (f. 29). Sew the cup to the petals. Sew on the base for the brooch.

Crochet knitted daisy is ready!

Crochet chamomile in Irish lace: MK video

Knitted chamomile with voluminous petals

We will need:

• yarn, 100% acrylic, white, green and yellow;
• decorative eyes;
• button in the form of a ladybug;
• thin wire for the frame;
• filler;
• hook number 2.5.

Description

Petals

We collect 3 VP with white yarn. Then - see the master class in the photo and description:

• 1p: in the 1st st. From the hook, tie 6 single crochet.

• 2p .: + 6st. = 12 stlb b / n;
• 3p.: (StBN, + 1pr.) = 12 stlb b / n;
• 4p.: (StBN, + 1pr.) X6 = 18 StBN;
• 5r.: 18 pillars. without nak .;
• 6p.: (2 StBN, + 1pr.) X6 = 24 StBN;
• from 7p. 8p.: 24 st. without n .;
• 9p.: (6 StBN, -1ub.) X3 = 21 StBN;
• 10r.: 21 pillars. without n .;
• 11r.: (5 StBN, -1ub.) X3 = 18 StBN;
• 12r.: 18 pillar. without n .;
• 13r.: (4 StBN, -1ub.) X3 = 15 StBN;
• from 14 p. 15 rubles each: 15 pillars. without n .;
• 16r.: (3 StBN, -1ub.) X3 = 12 StBN;
• from 17 p. for 18 rubles: 12 pillars. without n.

You need to tie 10 petals.

Performing the last row, we connect the petals to each other for the 6th and 12th columns.

The next step is to fill in the middle of the flower. We have double petals, we will knit along their one side, in a spiral. Reduce the number of stlb: 54 → 48 → 42 → 36 → 30 → 24 → 18 → 12 → 6. The knitting pattern is as follows:

• 1p.: (8 StBN, -1 ub.) X6 = 54;
• 2p.: (7 StBN, -1 ub.) X6 = 48;
• 3p.: (6 StBN, -1 ub.) X6 = 42;
• 4p.: (5 StBN, -1 kill) x6 = 36;
• 5r.: (4 StBN, -1 ub.) X6 = 30;
• 6p.: (3 StBN, -1 ub.) X6 = 24;
• 7p.: (2 StBN, -1 ub.) X6 = 18;
• 8p.: (1 StBN, -1 ub.) X6 = 12;
• 9p.: (-1 kill) x6 = 6.

Finally, we knit 6 stb together, cut and fasten the thread.

We make a frame from the wire and insert it into the petals.

We tie the middle on the second side in a spiral and close the hole completely.

Now we will knit a green circle.

• 2p.: (+ 1pr.) X6 = 12 st.b / n;

Yellow center of the flower

• 1p.: In the 1st p. From the hook, tie 6 sc;
• 2p.: (+ 1pr.) X6 = 12 st.b / n;
• 3p.: (1 column without / n, +1 pr.) X6 = 18 st.b / n;
• 4p.: (2 columns without / n, +1 pr.) X6 = 24 st.b / n;
• 5p.: (3 columns without / n, +1 pr.) X6 = 30 st.b / n;
• 6p.: (4 columns without / n, +1 pr.) X6 = 36 st.b / n;
• 7p.: (5 columns without / n, +1 pr.) X6 = 42 st.b / n.
• from 8p. 9p.: 42 st.b / n.

Sew the yellow center onto the front side of the chamomile.

Spout

• 1p.: In the 1st p. From the hook, tie 6 S / BN;
• 2p.: (1 S / BN, +1 pr.) X6 = 12 st.b / n;
• 3p.: (1 S / BN, +1 pr.) X6 = 18 st.b / n;
• from 4p. 6p.: 18 st.b / n;
• 7p.: (1 st.b / n, -1 ub.) X6 = 12 st.b / n.

Fill the nose with filler. We continue knitting:

• 8r.: 6 pillars. b / n.

Then we knit all stb together. We do not cut the thread. Using it, we attach the nose to the center of the flower.

Stem

Tie round 12 C / BN until the desired length is obtained.

Chamomile leaves, if desired, can be knitted using the previous master class.

We knit a camomile crochet: video master class

Large chamomile with contour petals

We will need:

• yarn of white and yellow colors, 50g by 150m;
• hook number 2.5.

Knitting pattern - see below.

Description and master class with photo

We collect a chain of 5 air n., We close it in the SS ring.

Next, we will knit lush columns in a circle. We make 3 air. n. lifting. Next, a lush stb: * make a yarn over the hook, insert the hook into the center of the original ring, grab the thread and pull out a long p. In height equal to three lifting loops * From * and to * repeat twice. We get several elongated stitches on the hook.

We grab the working thread and knit all stitches from the hook, then knit 1 VP.

After 1 VP we knit 11 more lush sts. We complete the circle. R. SS at the top of the lush st. Cut the thread, bring the end to the wrong side and fix it.

Now we will knit white petals. We connect the thread to the top of any fluffy stb. We collect 15 VP, we fix the C / BN chain from the top of the same stlb.

Hello, my dear beauties are needlewomen, and part-time readers of my diary! I propose to start preparing spring-summer outfits and crochet a beautiful delicate daisy, which can serve as an independent decoration-brooch on any thing, and as an ornament on the neck, sewing a beautiful summer dress on the sides and the basis for a knitted blouse, because, having knitted several dozen pieces of such daisies and stitching them together, you get a stunning thing!

So, a luxurious master class, another idea of ​​knitted flowers from Ksenia Nikolaeva - how to crochet a beautiful and delicate daisy.

Materials and tools for Chamomile:

Threads "? Rice" in white, yellow and green colors
hook number 0.7
green wire
base for a brooch
wide-eye needle

Description of knitting Chamomile
Flower petals
For petals, dial a chain of 13 VP.
Starting from the 3rd from the hook of the loop, knit 1 stbn, 1 pstn, 7 stsn, 1 pst sn, 1 sbn (photo 1).
Turn the knitting and tie the petal around the perimeter with connecting posts (photo 2).
In the end loop, knit 2-3 columns so as not to tighten the canvas.
The first petal is ready.

Without breaking the thread, tie a chain of 13 VP for the 2nd petal (photo 3). Execute it exactly like the first one. Tie 15 petals in total. The result is a bunch of 15 elements, in which each petal is partially superimposed on the previous one (photo 5).
Tie 1 VP for lifting. Tie the bases of the petals with the stbn in such a way that each column holds the left half of one petal with the right half of the previous one (photo 6, 7, 8).

In total, you get 15 stbn, according to the number of petals. After finishing the strapping, close the part with the petals in the ring and continue knitting the stbn, evenly performing the decreases until the hole in the center is completely closed (photo 9).

In the first row, repeat five times: 1 sc - 1 decrease. In the second row there are 5 decreases. Just in case, let me remind you how to make the deductions: insert a hook under both half-loops of the previous row's column, pull out the thread, do not knit, insert the hook under both half-loops of the next column, draw out the thread, knit all three loops on the hook. The side on which the ends of the threads are located is the wrong side.

Yellow center of chamomile

The yellow middle (photo 10) is knitted in a spiral with single crochet columns with uniform increments: 6-12-18-24.
The hook is inserted under both half-loops. For an increase from the loop of the previous row, knit two stbn. First row: 6 sc in a sliding loop (amigurumi loop). Second row: 6 increments. Third row: increase - 1 sc (repeat 6 times). Fourth row: 2 sc - increase (repeat 6 times).

When cutting the thread, you need to leave a sufficient end in length to sew the middle to the petals (photo 11). To make the middle convex, you can fill it with filler (photo 12). Bring the thread to the wrong side, knot all ends and cut.

Chamomile leaves.
For a sheet, dial 22 VP. Starting from the 3rd from the hook of the loop, knit 2 stbn, 3 stsn, 10 stsn, 3 stsn, 2 stbn (photo 13). Expand knitting, attach a green wire about 25 cm long to the edge of the part.

Tie the part around the perimeter together with the wire as follows:
2 stbn, 1 pstscn, 1 stsn, 2 vp, 1 joint venture at the base of the last column;
1 stbn, 1 pstsn, 1 stsn, 1 sts2n, 3 vp, 1 joint venture at the base of the last column;
1 stbn, 1 pstsn, 1 stsn, 1 sts2n, 1 sts3n, 4 vp, cn at the base of the last column;
1 stbn, 1 pstsn, 1 stsn, 1 sts2n, 3 vp, cn at the base of the last column;
3 stbn, knit 2-3 stbn from the end of the sheet, 3 stbn;

1 stbn, 4 vp, 1 sts3n at the base of the chain from vp, 1 sts2n, 1 stsn, 1 pstsn, 1 stbn;
1 stbn, 3 vp, 1 sts2n at the base of the chain from vp, 1 stsn, 1 pstsn, 1 stbn;
1 stbn, 2 vp, 1 stbn at the base of the chain from vp, 1 stbn, 2 stbn.

By the same principle, tie 2 more sheets of a smaller size (make the initial chain shorter, "teeth" - lower and in smaller quantities).

Chamomile bud.
The bud is knitted in the same way as a flower, but its petals are shorter (instead of 13 VP for the initial row, you can dial 10), thinner (instead of stsn and pstsn knit stbn) and there are fewer of them (13 will be enough).

Middle yellow: 6-12-18. Green cup: 6-12-18-24. Sew the middle to the petals. With a piece of wire about 25 cm, sew through the petal circle from the inside out, hooking several threads (photo 19).
Bend the wire in the middle by folding the ends together. Put a cup on the stem, sew it to the petals (photo 21).
Attach a green thread to the base of the cup and tie the wire stem of the stbn quite tightly to the desired length (photo 23).
In the process of tying, attach a small sheet to the stem (photo 24).

Tie the cup: 6-12-18-24-30-36 (photo 25).
Before the last - the sixth - next to attach the stem, knit 2-3 stbn, attach a sheet, knit 2-3 stbn, attach the last sheet, knit the row to the end.
Tie the ends of the threads on the wrong side with a knot and cut. Twist the wire ends together and lay them in a ring (photo 29). Sew the cup to the petals. Sew on the base for the brooch.

Materials and tools for Chamomile:
threads "Iris" of white, yellow and green colors
hook number 0.7
green wire
base for a brooch
wide-eye needle

Description of knitting Chamomile

For petals, dial a chain of 13 VP.
Starting from the 3rd from the hook of the loop, knit 1 stbn, 1 pstn, 7 stsn, 1 pst sn, 1 sbn (photo 1).
Turn the knitting and tie the petal around the perimeter with connecting posts (photo 2).
In the end loop, knit 2-3 columns so as not to tighten the canvas. The first petal is ready.
Without breaking the thread, tie a chain of 13 VP for the 2nd petal (photo 3). Execute it exactly like the first one. Tie 15 petals in total. The result is a bunch of 15 elements, in which each petal is partially superimposed on the previous one (photo 5).
Tie 1 VP for lifting. Tie the bases of the petals with the stbn in such a way that each column holds the left half of one petal with the right half of the previous one (photo 6, 7, 8).
In total, you get 15 stbn, according to the number of petals. After finishing the strapping, close the part with the petals in the ring and continue knitting the stbn, evenly performing the decreases until the hole in the center is completely closed (photo 9).
In the first row, repeat five times: 1 sc - 1 decrease. In the second row there are 5 decreases. Just in case, let me remind you how to make the deductions: insert a hook under both half-loops of the previous row's column, pull out the thread, do not knit, insert the hook under both half-loops of the next column, draw out the thread, knit all three loops on the hook. The side on which the ends of the threads are located is the wrong side.

Yellow center of chamomile
The yellow middle (photo 10) is knitted in a spiral with single crochet columns with uniform increments: 6-12-18-24.
The hook is inserted under both half-loops. For an increase from the loop of the previous row, knit two stbn. First row: 6 sc in a sliding loop (amigurumi loop). Second row: 6 increments. Third row: increase - 1 sc (repeat 6 times). Fourth row: 2 sc - increase (repeat 6 times).
When cutting the thread, you need to leave a sufficient end in length to sew the middle to the petals (photo 11). To make the middle convex, you can fill it with filler (photo 12). Bring the thread to the wrong side, knot all ends and cut.

Chamomile leaves.
For a sheet, dial 22 VP. Starting from the 3rd from the hook of the loop, knit 2 stbn, 3 stsn, 10 stsn, 3 stsn, 2 stbn (photo 13). Expand the knitting, attach a green wire about 25 cm long to the edge of the part.Tie the part around the perimeter together with the wire as follows:
2 stbn, 1 pstscn, 1 stsn, 2 vp, 1 joint venture at the base of the last column;
1 stbn, 1 pstsn, 1 stsn, 1 sts2n, 3 vp, 1 joint venture at the base of the last column;
1 stbn, 1 pstsn, 1 stsn, 1 sts2n, 1 sts3n, 4 vp, cn at the base of the last column;
1 stbn, 1 pstsn, 1 stsn, 1 sts2n, 3 vp, cn at the base of the last column;
3 stbn, knit 2-3 stbn from the end of the sheet, 3 stbn;

1 stbn, 4 vp, 1 sts3n at the base of the chain from vp, 1 sts2n, 1 stsn, 1 pstsn, 1 stbn;
1 stbn, 3 vp, 1 sts2n at the base of the chain from vp, 1 stsn, 1 pstsn, 1 stbn;
1 stbn, 2 vp, 1 stbn at the base of the chain from vp, 1 stbn, 2 stbn.
By the same principle, tie 2 more sheets of a smaller size (make the initial chain shorter, "teeth" - lower and in smaller quantities).

Chamomile bud.
The bud is knitted in the same way as a flower, but its petals are shorter (instead of 13 VP for the initial row, you can dial 10), thinner (instead of stsn and pstsn knit stbn) and there are fewer of them (13 will be enough).
Middle yellow: 6-12-18. Green cup: 6-12-18-24. Sew the middle to the petals. With a piece of wire about 25 cm, sew through the petal circle from the inside out, hooking several threads (photo 19).
Bend the wire in the middle by folding the ends together. Put a cup on the stem, sew it to the petals (photo 21).
Attach a green thread to the base of the cup and tie the wire stem of the stbn quite tightly to the desired length (photo 23).
In the process of tying, attach a small sheet to the stem (photo 24).

Tie the cup: 6-12-18-24-30-36 (photo 25).
Before the last - the sixth - next to attach the stem, knit 2-3 stbn, attach a sheet, knit 2-3 stbn, attach the last sheet, knit the row to the end.
Tie the ends of the threads on the wrong side with a knot and cut. Twist the wire ends together and lay them in a ring (photo 29). Sew the cup to the petals. Sew on the base for the brooch.
Chamomile, crochet, ready!

Crochet chamomile: description

You will need Iris threads of white, yellow and green colors, hook number 0.7, green wire, a base for a brooch, a needle with a wide eye.

For petals, dial a chain of 13 VP. Starting from the 3rd from the hook of the loop, knit 1 stbn, 1 pstn, 7 stsn, 1 pst sn, 1 sbn (photo 1). Turn the knitting and tie the petal around the perimeter with connecting posts (photo 2). In the end loop, knit 2-3 columns so as not to tighten the canvas. The first petal is ready. Without breaking the thread, tie a chain of 13 VP for the 2nd petal (photo 3). Execute it exactly like the first one. Tie 15 petals in total. The result is a bunch of 15 elements, in which each petal is partially superimposed on the previous one (photo 5). Tie 1 VP for lifting. Tie the bases of the petals with the stbn in such a way that each column holds the left half of one petal with the right half of the previous one (photo 6, 7, 8). In total, you get 15 stbn, according to the number of petals. After finishing the strapping, close the part with the petals in the ring and continue knitting the stbn, evenly performing the decreases until the hole in the center is completely closed (photo 9). In the first row, repeat five times: 1 sc - 1 decrease. In the second row there are 5 decreases. Just in case, let me remind you how to make the deductions: insert a hook under both half-loops of the previous row's column, pull out the thread, do not knit, insert the hook under both half-loops of the next column, draw out the thread, knit all three loops on the hook. The side on which the ends of the threads are located is the wrong side.

The yellow middle (photo 10) is knitted in a spiral with single crochet columns with uniform increments: 6-12-18-24. The hook is inserted under both half-loops. For an increase from the loop of the previous row, knit two stbn. First row: 6 sc in a sliding loop (amigurumi loop). Second row: 6 increments. Third row: increase - 1 sc (repeat 6 times). Fourth row: 2 sc - increase (repeat 6 times). When cutting the thread, you need to leave a sufficient end in length to sew the middle to the petals (photo 11). To make the middle convex, you can fill it with filler (photo 12). Bring the thread to the wrong side, knot all ends and cut.

For a sheet, dial 22 VP. Starting from the 3rd from the hook of the loop, knit 2 stbn, 3 stsn, 10 stsn, 3 stsn, 2 stbn (photo 13). Expand the knitting, attach a green wire about 25 cm long to the edge of the part.Tie the part around the perimeter together with the wire as follows:
2 stbn, 1 pstscn, 1 stsn, 2 vp, 1 joint venture at the base of the last column;
1 stbn, 1 pstsn, 1 stsn, 1 sts2n, 3 vp, 1 joint venture at the base of the last column;
1 stbn, 1 pstsn, 1 stsn, 1 sts2n, 1 sts3n, 4 vp, cn at the base of the last column;
1 stbn, 1 pstsn, 1 stsn, 1 sts2n, 3 vp, cn at the base of the last column;
3 stbn, knit 2-3 stbn from the end of the sheet, 3 stbn;

1 stbn, 4 vp, 1 sts3n at the base of the chain from vp, 1 sts2n, 1 stsn, 1 pstsn, 1 stbn;
1 stbn, 3 vp, 1 sts2n at the base of the chain from vp, 1 stsn, 1 pstsn, 1 stbn;
1 stbn, 2 vp, 1 stbn at the base of the chain from vp, 1 stbn, 2 stbn.
By the same principle, tie 2 more sheets of a smaller size (make the initial chain shorter, "teeth" - lower and in smaller quantities).

The bud is knitted in the same way as a flower, but its petals are shorter (instead of 13 VP for the initial row, you can dial 10), thinner (instead of stsn and pstsn knit stbn) and there are fewer of them (13 will be enough). Middle yellow: 6-12-18. Green cup: 6-12-18-24. Sew the middle to the petals. With a piece of wire about 25 cm, sew through the petal circle from the inside out, hooking several threads (photo 19). Bend the wire in the middle by folding the ends together. Put a cup on the stem, sew it to the petals (photo 21). Attach a green thread to the base of the cup and tie the wire stem of the stbn quite tightly to the desired length (photo 23). In the process of tying, attach a small sheet to the stem (photo 24).

Tie the cup: 6-12-18-24-30-36 (photo 25). Before the last - the sixth - next to attach the stem, knit 2-3 stbn, attach a sheet, knit 2-3 stbn, attach the last sheet, knit the row to the end. Tie the ends of the threads on the wrong side with a knot and cut. Twist the wire ends together and lay them in a ring (photo 29). Sew the cup to the petals. Sew on the base for the brooch. Ready)

Crochet daisies

Nice to crochet chamomile.

They will never fade and will remind you of spring when fresh flowers bloom.

Crochet four types of daisies, or at least one of them.

Crochet daisies, a story about knitting

I offer a choice of several varieties of daisies from the following gallery.

If you are interested, read the story about daisies or immediately proceed to the description of knitting.

About camomiles

An old story tells how chamomile acquired its charming appearance. Rose, the queen of flowers, had a birthday. Gathered guests from the category of flora, decorated with bright petals.

One little daisy was shy about her modest appearance and was very happy, whispering her congratulations to the luxurious Rose.

But the wind carried the words of the chamomile to the queen, who assured her that there was no reason to be ashamed: the chamomile's dress was flawless white, and the heart was gold.

At these words, the chamomile was embarrassed and the tips of its petals turned slightly pink. Amazing chamomile flower - its petals close at night and open during the day.

Hence the name of the flower, "day's eye". Chamomiles symbolize devoted love, purity and are a symbol of innocence.

In the old days, girls used to decorate their hair with daisies. Until today, they are using daisies to express their love in a special way.

"Loves, does not love ..." - a well-known fortune-telling, with the tearing off of petals from the middle of a flower.

For knitting, you need several types of yarn, as indicated in the materials. But you can always pick up the necessary yarns from your yarn stocks.

Knitting materials:

• YarnArt ETAMIN yarn - 100% acrylic, 30 g / 180 m;
• yarn YarnArt Begonia - 100% cotton, 50 g / 169 m;
• yarn Alina - 70% viscose, 30% silk, 50 g / 115 m;
• yarn Alize miss - 100% mercerized cotton, 50 g / 280 m;
• yarn KARTOPU conca - 100% Acrylic, 100 g / 300 m;
• tapestry needle;
• green wire for pedicels;
• padding padding polyester for the cup.

Flower cups

When changing the thread from yellow to white, hide the remaining ends for.

For each chamomile, tie a cup with green threads according to the detailed one with the photographs.

Leaves in the last row of the cup do not need to be knitted; knit the first two rows according to the description of the middle for each chamomile.

You can knit a chamomile according to the pattern or according to the knitting description.

Chamomile first

For knitting, use white Alina yarn for the petals and yellow YarnArt ETAMIN for the center.

Tie 4 VP with yellow threads and enclose in a ring.

Description of knitting the first chamomile

1 row: VP, 8 PRS in the ring, SP-1.

2nd row: 3 VP, in each loop of the previous row 2 PRS, SP-3.

3 row: bp + sc, pico, (2 sc! Sc, sc! Sc, pico) * 7, 2 sc! sbn, sp-1.

Change the thread to white, which is attached to the first loop after the picot of the previous row and start knitting the petals as described or using the scheme.

4 row: (psbn + pico! Sbn, (psbn, 9 VP, psbn in the second loop from the hook, sbn, 4 ssn, sbn, psbn) above the chain) * between yellow picos before. row, sp-1. [Q]

The camomile petals are crocheted with white Alina yarn, and the center is crocheted with orange Alize miss yarn.

Knit daisies according to the pattern or description.

Description of knitting the petals of the second chamomile

Knit the middle of the garden chamomile according to the description of 1-2 rows of the middle of the "Fragrant Chamomile".

Then attach the white thread to knit the petals.

3 row: (5 ch, cc2n, 5 ch, psbn) * to the end of the circular row in each loop, cn-1. [16 petals]

Let's call 5 VP of the previous row as "arch5".

4 row: (4 sbn under the arch 5, 4 vp, ss2n, 4 ​​vp, 4 sbn under the arch5) * over each petal, cn-1. [Q]

Pharmacy chamomile

Crocheted chamomile with thick yarn

This flower is an absolute copy of a garden chamomile, but the threads for knitting are selected more tightly.

Very small changes, but the result, as you can see, is completely different.

Meadow chamomile

Chamomile is connected according to the description of the previous one, "Pharmacy Chamomile", from 1 to 3 rows of KARTOPU conca threads and therefore it looks more solid.

Among the daisies, a small one looks out, for which there is also a description of knitting.

Flowers with petals different lengths knitted from Alina yarn, and the center from Alize miss yarn.

Description of knitting a large chamomile

Knit the middle of the chamomile with an orange thread.

1 row: knit "" from 7 sbn, cn-1.

2nd row: increase * 7, cn-1.

Knit chamomile petals with white thread in each loop of a circular row. The length of the petal depends on the quantity air loops in a chain.

The petals alternate in such groups - 11 VP each and twice 10 VP each. Attach white thread to any loop on the second row.

When knitting, hide the end of the cut thread.

3 row: sb, tie a chain of 10 (11) ch;
petal from 10 VP - sbn in the second loop from the hook, 6 ssn, sbn, sbn in the first sbn row.

a petal of 11 VP - as in the description above, but instead of 6 PRS, knit 7 PRs. Alternating between the petals, continue knitting to the end of the circular row. [Q]

Little daisy

It differs from a large chamomile with a "magic ring" of 6 sc.

In the second row, after the increase of 12 sbn.

Petals from 10 VP (see above) and 9 VP.

A petal from 9 VP - sbn in the second loop from the hook, 5 ssn, sbn, sbn in the first sbn row.

Let's denote the petals:

• from 11 VP - 11;
• from 10 VP - 10;
• from 9 VP - 9.

Knit petals according to the scheme:
9, 10 * 5 times, 9, 10, 9, 10 * 3 times.

In the photo of daisies in the right corner, you can see two curly daisies related by the same description.

The difference is that the unstarched petals curl into the interior of the flower.

Loop names

Daisies are crocheted, like other similar ones. Getting started knitting, carefully consider the information on the abbreviated names of the loops, so that the result does not upset.

List of abbreviations

Abbreviated names of loops	Loop names
slp, next p, next a loop	next loop
decrease	pull the working thread through the first loop, then through the second and knit them together
decreaseSS	tie two unfinished crochet stitches together by pulling a working thread through 3 loops on the crochet hook.
decrease of PRSP	through two not tied to the end of the pssn (5 loops on the hook), stretch the working thread
vp	air loop
sbn	single crochet
ssn	double crochet
ss2n	double crochet
ss3n	column with three crochets
psbn	single crochet
pssn	half double crochet
increase	2 sc in one loop
increaseSS	2 PRS in one loop
increase of the PRSP	2 pssn in one loop
cn-n	connecting loop, pull the thread through Nth loop the beginning of the row and last loop knitting
connecting loop	connecting loop; pull the working thread through the first loop of the row and the loop on the hook
prop.N	skip N loops
(vp + sbn)	the plus sign means that both loops are knitted in one loop
arch	a chain of several VPs in a knitting pattern
!	(exclamation mark) - to the left of the sign is what we knit, and to the right where we knit in the previous one. a number of
*	repeat the specified number of times
turn or turn	rotate knitting
previous row	previous row
( ),() or (())	brackets enclose a group of loops that are performed the specified number of times
	number of loops in a knitted row
[X]	Fasten the thread, but do not cut it. Leave the tip at 15-20 cm.
[Q]	Fasten the thread, hide the end of the thread inside the part and cut.
"around"	the word "around" means that the specified stitch must be knitted into each loop of the circular row
"everywhere"	the word "everywhere" means that in each loop of a circular or flat row, knit the specified stitch
PH	working thread