Menu

Aquatic inhabitants. Do-it-yourself octopus from threads: a master class for kids Do-it-yourself octopus

Gynecology

Probably, many mothers of babies were faced with the need to sew some kind of educational toy for kindergarten... For older children, they are usually asked to sew educational books, cubes or rugs, and for very small children - toys that help children develop physically - orthopedic paths, rugs, as well as all kinds of toys with which you can perform simple physical exercises.

One of these toys, aimed at developing the coordination of children's movements, is the "octopus". Children happily jump over its tentacles, raise and lower them with their hands, sitting on the floor.

Sewing such an inhabitant of the seas is possible even for a mother-needlewoman, who is not too sophisticated in making toys. Materials for it need simple and affordable, and it is sewn quite simply and quickly.

In order to sew the body of an octopus, you need to choose a pattern for an adult or children's cap, consisting of 6 wedges.

You can find it in specialized sewing literature, build it yourself, reshoot from a ready-made cap, or simply download it from the Internet.

Materials (edit)

  1. To make an octopus you will need:
  2. Light gray jersey;
  3. Adhesive pad on a knitted basis, white;
  4. Thin synthetic winterizer;
  5. Holofiber filler;
  6. Felt hard, white and black
  7. Threads in the color of the base material and felt.

Tools

  • Scissors;
  • Sewing machine;
  • A simple pencil (chalk or soap) for cutting on fabric;
  • Iron;
  • Needle for hand sewing;
  • Pins.

Cutting and sewing

According to the pattern of the wedge of the cap, you should cut out 6 parts of the body of the octopus from knitwear. The seam allowances should be as follows:

  • on side cuts - 5-7 mm;
  • along the cut of the bottom - 1 cm.

All 6 parts must be duplicated from the seamy side with an adhesive strip on a knitted basis.

Then any 2 parts of the body must be sewn together along the side cuts with a seam 5-7 mm wide (depending on the processing allowance). In this case, the parts should look facing each other, and the seam itself should be laid on the wrong side of the parts.

For the convenience of sewing, parts can be pre-chipped with pins or swept away with hand stitches.

After that, the seam allowances must be spread out in opposite directions and delayed at a distance of 1 mm from the seam.

In the same way, you should sew and delay the third part.

The two halves of the torso must be sewn together, as shown in the photo.

Then you need to cut 12 pieces of tentacles (2 for each) from jersey. Their length and width can be arbitrary. The approximate length can vary from 50 to 60 cm, the width at the widest point is 6 cm, at the narrowest point - 3-4 cm, you also need to add a processing allowance of 7 mm ..

6 parts of the tentacles should be duplicated with an adhesive pad.

All parts of the tentacles must be cleaved in pairs - one part is duplicated, the other is not, face to face, and stitched around the perimeter at a distance of 7 mm from the cuts.

After laying the stitching, the allowance at the end of the tentacles must be trimmed to a width of 3 mm, so the part will turn out more easily and will look beautiful when finished.

The prepared tentacles must be turned out onto the front side.

Each tentacle should be loosely filled with holofiber. Due to the fact that one part of the tentacle is duplicated, and the other is not, the padding will pull the latter more strongly. As a result, the tentacle will be slightly curved, which will make the octopus look more realistic.

From white and black felt, you need to cut out the details of the eyes of the octopus. They can be of any shape. They must be sewn onto the body.

In the middle of each of the 6 wedges (along the lower cut), the tentacles of the octopus should be swept.

After that, you need to cut out the lower part of the body of the octopus from the jersey - a circle. Its diameter can be calculated based on the circumference that the widths form lower parts wedges (formula for the circumference).

The allowance for sewing the circle to the body should be 1 cm.

This detail should be manually swept along the entire perimeter on a layer of thin padding polyester, which will give it rigidity.

Then, approximately the length of the workpiece should be sewn to the body of the octopus. Through the unsewn hole, the toy must be turned out onto the front side.

DIY toys are the most beloved, the most expensive for a child. Probably because the mother puts her love and warmth in them, which the child feels. We suggest making a cute octopus for development fine motor skills your child.

In order to create such a cute animal, prepare:

  • pieces of natural fabrics of different colors;
  • scissors;
  • threads;
  • a piece of felt or skin for the eyes;
  • two large black buttons;
  • various fillers for tentacles (cereals, salt, buttons, beans, etc.).

So let's get started. Take a piece of fabric, fold it in half and cut out two halves for the head of our octopus in the shape of the English letter D, as shown in the photo.

Now make eyes on one of the halves. To do this, sew on circles of white leather or felt, and make the pupils from buttons.

Now work on the tentacles. To do this, sew multi-colored tubes closed on one side and fill them with different fillers. Buckwheat, peas, beans, small buttons, cotton wool, etc. are suitable. The tentacles can also be of different lengths.

Now sew all 8 tentacles to the back of the head from the wrong side. As shown in the pictures.

Now you need to sew the two halves of the octopus head along the side seams, folding them with the front side inward, without touching the tentacles. See the photo.

Octopuses are not the kind of creatures that usually cause an attack of affection in people, however, with a detailed study, you can find more than one reason that will make you have respect for these animals. For example, did you know that these are very, very warm-hearted creatures? Yes, yes, each of them has three hearts: one of them drives blue blood through the body, the other two will drive it through the gills. Zoopsychologists say that octopuses are the smartest animals of all invertebrates: they are trainable, they can distinguish geometric shapes, they are trainable and completely tame - if they are fed by the same person, they will begin to recognize it, they will become attached and will even express joy in their own way. from the meeting. In addition, respect is due to the fact that these are extremely clean animals: they regularly clean their homes with a powerful jet of water, they will never leave uneaten food "in the house" - the leftovers are piled outside on a special garbage heap. Isn't all this a good reason to do do it yourself octopus? Funny toy will bring a lot of joy to children, teach them to look not only at the outside, but also think about the inside, and just give you a few pleasant hours of creativity. Diy octopus- must do this season!

DIY octopus - 5 ideas for creative people:

1. Octopus crochet

Crochet lovers will definitely like this project! There is only one problem - be prepared for the fact that, having started, it will be completely unrealistic to stop - you will knit and knit octopuses, enjoy their funny faces, be touched and admired. Keychain, "beacon" for a backpack or cosmetic bag, decor for children's clothing, part of a mobile - there are never too many octopuses!

2. Octopus from thread

A great way to recycle unnecessary and all kinds of threads left over from other projects. Of course, to make such an octopus, you will need a lot of leftovers, however, the result is so pleasant and charming that it is almost impossible to resist - not a single child will be able to part with such a toy. By the way, about children - be sure to involve them in this work: everything is simple there, and the little ones will definitely like it.

3. Sock octopus

To create such a toy, you don't even need to pick up threads and a needle - an octopus from a sock is made quickly, interestingly and without stitching. Decorate the stuffed toy with all sorts of décor, decorate with bow ties, and kids will surely appreciate lovely friends who can be funny, playful, and of course downright adorable!

4. Cloth octopus

Everyone loves soft toys. You can sleep with them, go for a walk, sit comfortably in an armchair or lie in a hammock. Octopuses are sewn quite simply, but they look absolutely magical in the interior! Stylish, original and interesting. Large octopuses can make great sleeping pillows, and small octopuses can be favorite toys for a child.

Even a child of five or eight years old can make this toy with his own hands, if, of course, you show him how to do it and give him material. Moreover, soft toy an octopus is recognizable in any form if it has a head with eyes and as many legs as you want.

Octopus

We need:

  • a square flap of plain fabric, it is better such that unprocessed edges do not "crumble": fleece, thin felt, drape and so on;
  • a small ball, ball, ball of unnecessary thread or a piece of foam rubber to fill the head;
  • scissors;
  • beautiful thin braid;
  • "eyes";
  • small scarf made of colored fabric.

Sequence of work

  • Determine the middle of the square patch and place a ball or skein of unnecessary thread ("brain" or what will become the insides of the head) in this place. Squeeze the ends and mark the “neck” line with chalk or felt-tip pen.
  • Unfold the fabric, straighten it and with your own hands cut the fringe from all four sides, 6 strips on each side, without crossing the “neck” line. Try to keep them the same width. You should have a small square with brushes.

  • Reinsert the "brains" into the octopus and tighten the "neck" with a strong thread. You can tie a scarf or bow tie.
  • Straighten the fringe with scissors.

  • Braid tight braids, tying them at the end with a ribbon bow.

  • Glue or sew on "eyes", draw a smile with a felt-tip pen and tie a scarf.

From threads

You can make the same charming little octopus with pigtails with your own hands from thick threads. Better to use synthetic yarn or cotton with synthetics. It keeps its shape and volume perfectly. The technique of making a toy is shown in the video.

Some additional tips

  • Instead of a wad of newspaper, you can use a plasticine ball or packaging from a kinder surprise.
  • To prevent the threads from diverging on the octopus's head, you can slightly grease the filler with PVA glue.
  • To accurately calculate the number of legs, you can make a simple multiplication 15 cm (octopus length) x 3 (number of strands in a strand) x 3 (number of strands in a braid) x 8 (number of braids) = 1080 cm. So, we take a bundle of 9 strands by 120 cm and fold it in half THREE times.

Very simple

Even the smallest master can easily make this toy with his own hands. Give your baby a handkerchief or a square piece of fabric, slightly cut on the sides (as in the photo), and a small ball of anything: fabric, foam rubber, crumpled newspaper, ball, etc. Let the child throw a cloth over the ball and tie the braid around the octopus's neck. Draw the eyes with your own hands or glue them together.

Sock octopus

Would need:

  • two old socks, can be different;
  • any filler;
  • wooden knitting needle;
  • scissors;
  • thread, needle;
  • felt-tip pen.

Master class on making an octopus from socks

  • Take two socks and draw the lines of future cuts on them. From the toe to the middle of the foot, one of the socks will represent the head of the toy. From the heel to the elastic, divide each toe into 4 parts lengthwise. These will be the tentacles.

  • We cut out the details of the toy.

  • We sew the legs, leaving them unstitched on one side, and turn them out.

  • We fill in all the details with a synthetic winterizer using a wooden knitting needle. We carefully sew up all the holes with our own hands.

  • We sew the tentacles to the head and tighten the "neck". We draw a face. The toy is ready.

Glove

This version of the sea clam assumes both 4 legs and 8. It all depends on how many gloves you do not mind using in your work. Moreover, gloves do not have to be the same.

  • Hide one inside thumb and carefully sew up the trace from it. Wrap the elastic inward. Fill in the 4 remaining fingers and the glove itself with filler and sew up the top. To make it more convincing, you can pull the glove a little at the base of your fingers. Sew on the button eyes, mark the mouth. The four-legged octopus is ready.

  • A toy made of two gloves is made with your own hands a little more complicated. We also remove one thumb inward and mask its stay. We make an incision at the base of the fingers in a fingerless glove and insert another into it, leaving 4 fingers “on the street”. We fill all 8 fingers with padding polyester, stitch them at the base, at the same time closing the slot. We fill the double glove with filler, having previously tucked up the elastic band. Sewing up and making out the face.

Doctor octopus

Dr. Otto Gunther Octavius ​​is a super-villain, star of comics, cartoons and television series, has recently become a favorite toy of our children. The doctor has his own biography, his personal and social life. Making it yourself is difficult, but possible. We offer several options.

  • A villainous doctor from a Lego set, such as in the photo.
  • Doctor octopus from an ordinary doll with four tentacles from scrap materials glued to the back: polymer clay, boiler tubes, wire wrapped with threads, etc.
  • Even a child of five to eight years old can make this toy with his own hands, if, of course, you show him how to do it and give him material. Moreover, the octopus soft toy is recognizable in any form if it has a head with eyes and as many legs as you like.





    We need:

    • a square flap of plain fabric, it is better such that unprocessed edges do not "crumble": fleece, thin felt, drape and so on;
    • a small ball, ball, ball of unnecessary thread or a piece of foam rubber to fill the head;
    • scissors;
    • beautiful thin braid;
    • "eyes";
    • small scarf made of colored fabric.

    Sequence of work

    • Determine the middle of the square patch and place a ball or skein of unnecessary thread ("brain" or what will become the insides of the head) in this place. Squeeze the ends and mark the “neck” line with chalk or felt-tip pen.

    • Unfold the fabric, straighten it and cut the fringe on all four sides, 6 strips on each side, without crossing the "neck" line. Try to keep them the same width. You should have a small square with brushes.

    • Reinsert the "brains" into the octopus and tighten the "neck" with a strong thread. You can tie a scarf or bow tie.
    • Straighten the fringe with scissors.

    • Braid tight braids, tying them at the end with a ribbon bow.

    • Glue or sew on "eyes", draw a smile with a felt-tip pen and tie a scarf.

    From threads

    The same adorable pigtailed octopus can be made from thick threads. Better to use synthetic yarn or cotton with synthetics. It keeps its shape and volume perfectly. The technique of making a toy is shown in the video.

    Some additional tips

    • Instead of a wad of newspaper, you can use a plasticine ball or packaging from a kinder surprise.
    • To prevent the threads from diverging on the octopus's head, you can slightly grease the filler with PVA glue.
    • To accurately calculate the number of legs, you can make a simple multiplication 15 cm (octopus length) x 3 (number of strands in a strand) x 3 (number of strands in a braid) x 8 (number of braids) = 1080 cm. So, we take a bundle of 9 strands by 120 cm and fold it in half three times.

    Very simple

    Even the smallest master can easily make this toy. Give your baby a handkerchief or a square piece of fabric, slightly cut on the sides (as in the photo), and a small ball of anything: fabric, foam rubber, crumpled newspaper, a ball, and so on. Let the child throw a cloth over the ball and tie the braid around the octopus's neck. Draw or glue the eyes together.

    Would need:

    • two old socks, can be different;
    • any filler;
    • wooden knitting needle;
    • scissors;
    • thread, needle;
    • felt-tip pen.

    Master class on making an octopus from socks

    • Take two socks and draw the lines of future cuts on them. From the toe to the middle of the foot, one of the socks will represent the head of the toy. From the heel to the elastic, divide each toe into 4 parts lengthwise. These will be the tentacles.

    • We cut out the details of the toy.

    • We sew the legs, leaving them unstitched, on one side, and turn them out.

    • We fill in all the details with a synthetic winterizer using a wooden knitting needle. We carefully sew up all the holes.

    • We sew the tentacles to the head and tighten the "neck". We draw a face. The toy is ready.

    This version of the sea clam assumes both 4 legs and 8. It all depends on how many gloves you do not mind using in your work. Moreover, gloves do not have to be the same.

    • Hide one thumb inside and carefully sew up the mark from it. Wrap the elastic inward. Fill in the 4 remaining fingers and the glove itself with filler and sew up the top. To make it more convincing, you can pull the glove a little at the base of your fingers. Sew on the button eyes, mark the mouth. The four-legged octopus is ready.

    • The two-glove toy is a little more complicated. And also we remove one thumb inside and mask its stay. We make an incision at the base of the fingers in a fingerless glove and insert a friend into it, leaving 4 fingers “on the street”. We fill all 8 fingers with padding polyester, stitch them at the base, at the same time closing the slot. We fill the double glove with filler, having previously tucked up the elastic band. Sewing up and making out the face.

    Dr. Otto Gunther Octavius, a supervillain, star of comics, cartoons and television series, has recently become our children's favorite toy. The doctor has his own biography, his personal and social life. It is difficult to make it, but possible. We offer several options.

    1. A villainous doctor from a Lego set, such as in the photo.
    2. Doctor octopus from an ordinary doll with four tentacles glued to the back made of improvised materials: polymer clay, boiler tubes, from wire wrapped with threads, etc.