Sveta Kudinova

Who has not dreamed of becoming astronaut, fly around the earth or travel in outer space? Especially in childhood our dreams have no limits. Our children were no exception and in honor of the day astronautics decided to make their own spaceships.

For the manufacture of we need a ship:

sample ship models,

colored pencils and markers,

PVA glue,

tassel,

paper towel to remove excess glue

good mood and our imagination.

We start our work with the design of the template ship, it all depends on the preference of color and imagination. Help create a face ship felt-tip pens and colored pencils.

Templates can be printed on a white or colored sheet of computer paper.

When the ship appeared"face", all details must be cut out. Very carefully you need to cut out small petals for internal gluing of parts.

The next step is to glue the nose of the upper body.

Then you need to glue upper part body to the bottom four petals.

Ship already has its own shapes and it remains to glue the tail ship.

What ship can fly without an engine? In our case, we glue all three engines in turn.

We fix three engines to the body ship.

We are with the guys senior group"Merry little men" congratulations to everyone on the day astronautics! And we give everyone our work.

Such we got spaceships.

We invite you to master class II part of the project.

Model for your collection.
The Voskhod launch vehicle is a three-stage launch vehicle from the R-7 family. It was first launched on November 16, 1963.

Model for your collection.
Voskhod-2 is a Soviet manned spacecraft. For the first time in the world, an astronaut stepped out of the cockpit of a spacecraft into outer space.
Print on a printer, on A4 sheets of matte thick paper, cut and glue.

Model for your collection.
"Vostok" - a three-stage launch vehicle for launching spacecraft, liquid fuel is used at all stages. With the help of the Vostok launch vehicle, all spacecraft of the Vostok series, the Luna-1 - Luna-3 spacecraft, some artificial Earth satellites of the Cosmos, Meteor and Electron series were lifted into orbit.
Print on a printer, on A4 sheets of matte thick paper, cut and glue.

Model for your collection.
Vostok is the name of a series of Soviet spacecraft designed for manned flights in near-Earth orbit. They were created under the leadership of the General Designer of OKB-1 Sergey Pavlovich Korolev from 1958 to 1963.
Print on a printer, on A4 sheets of matte thick paper, cut and glue.

The Polyus spacecraft (Skif-DM, product 17F19DM) is a dynamic model of a combat laser orbital platform, the payload used during the first launch of the Energia launch vehicle in 1987. The flight program of the Skif-DM orbital station included ten experiments: four applied and six geophysical.

The Energia-M launch vehicle (product 217GK Neutron) is designed to launch spacecraft into near-Earth orbit and then launch from it (using the last launch stage) to higher orbits (including geostationary and heliostationary orbits), as well as lunar and interplanetary orbits.

The enormous scientific, industrial-technical and experimental potential of the Energia-Buran system created objective prerequisites for the further development of the development of a promising reusable aerospace system in our country. The first approximation to a variant of a fully reusable space-rocket transport system based on Energia-Buran is determined on the basis of the following considerations.

Buran is a Soviet winged reusable orbital spacecraft. It is intended for solving a number of defense tasks, launching various space objects into orbit around the Earth and servicing them; delivery of modules and personnel for the assembly in orbit of large structures and interplanetary complexes; return to Earth of faulty or exhausted satellites; development of equipment and technologies for space production and delivery of products to Earth; performing other cargo and passenger transportation along the Earth-space-Earth route.

Launch vehicle (RN) "Energy" (product 11K25, foreign designation SL-17) is the first Soviet rocket using cryogenic fuel (hydrogen) at the sustainer stage, and the most powerful of domestic rockets - the total engine power is about 170 million horsepower.

The Angara launch vehicle family is a new generation of launch vehicles based on a universal rocket module with oxygen-kerosene engines.

Paper crafts for boys. Fantastic spaceship Millennium Falcon from the movie J. Lucas "Star Wars".

Download the scheme of the spaceship. PDF files

Spacecraft assembly instructions (description in English):

Two MF-1 are printed.
MF-5MF-6, MF-7, and MF-8 are stuck on MF-1.
MF-5,MF-6, MF-7, and MF-8 are stuck on MF-1 of two sheets.
A hole is made in four places.
(I recommend you to use thicker paper for this part. Or please stick two sheets of papers and make it strong.)

MF-2 MF-3 of a side part and MF-4 are attached from a reverse-side side.
Four reinforcement parts R-2 are attached like a photograph.

A, B, C, and D are attached from a reverse-side side.
A and B are the parts for tops. And C and D are the parts for the bottoms.

R-1 which is reinforcement parts, and R-3 are attached in both sides as shown in a figure.

Four holes are made in MF-22 and E, G, and F are attached from a reverse-side side. Parts X and Y are attached in MF-21.

MF-22 are stuck on a main part.

MF-9, MF-13, MF-20, and MF-21 are attached.

The back attaches MF-25 similarly. MF-10, MF-16, MF-23, MF-24, MF-34,MF-35, MF-44, MF-45, and MF-17 are attached. MF-11 are attached in MF-10.

MF-18, MF-19, and MF-27 are attached.

An antenna is made from MF-28, and 29, 30, 31, 32 and 33.

2 sets of laser canon is made from MF-36, MF-37, and MF-26.(The upper photograph)

Under photograph is a simple version. Parts are MF-36, MF-37, and MF-38.

A cockpit is made and attached by MF-39, MF-40, MF-41, MF-42, and MF-43. MF-14 and the parts made from MF-15 are attached in both sides.

A heat dissipation mouth is made and attached by MF-46 and MF-47. MF-48 are attached on both sides.

Almost every boy in his childhood dreamed of becoming an astronaut in order to be able to conquer the stellar distances. These fantasies have come true for a few, while others can make spaceships with their own hands along with a child. There are many different options original crafts that even a child can handle.

How to make a spaceship model?

To make bright and a beautiful craft, you do not need special talents, the main thing is to follow the instructions. To work, you need to take:

• PVA glue;
• corrugated cardboard strips 1 cm wide;
• hot glue gun.

Ready-made corrugated strips can be purchased at needlework stores or cut from cardboard sheets. Depending on this, their length will vary from 29 to 50 cm (in our description, strips of 50 cm are used).

Manufacturing process

We begin to make a model of a spaceship with our own hands:

You can make such spaceships with your own hands with your children. Such a product will look no worse than an expensive toy from the store.

Craft: DIY spaceship

Any child will definitely master this option, since it is very simple to make it. For this craft, you need to take:

Manufacturing process

Craft - a do-it-yourself spaceship that any boy will like. Besides, this great option for exhibitions in kindergarten and school. Let's proceed directly to the manufacture:

You can make such spaceships with your own hands even more original with the help of various decorations, for example, stars, confetti, etc. In addition, you can give your child paints and ask them to decorate the craft at their discretion, in which case you will get a real family masterpiece.

Other options

You can also use plastic bottles to make your own spaceships. To do this, cut off the base, make wings out of cardboard and decorate with colored paper. In general, be creative, as your child will be very pleased to receive a craft made by parents, and not bought in a store.

The beauty of space, scientific research and unusual stories, almost every one of us at a certain period of life dreamed of becoming someday a real astronaut or explorer of space depths. I wanted to fly around the Earth, land on other planets, explore unknown worlds, just travel in the endless void. However, children do not just dream, they embody desires in games. So, how to make a spaceship out of paper?

Options

If you want to create a space ship, you can resort to two options. One of them involves mastering the ancient art of folding outlandish paper figures, which came from mysterious Japan. Origami ships are graceful, beautiful, easy to fold. paper can be made in another way: by drawing a layout, carefully cutting it out and folding it using glue or tape. Which option to choose is everyone's business.

Origami Ship: Getting Started

For creativity, you need a mere trifle: a rectangular sheet of paper. It can be colored or white, it all depends on the intention of the creator. However, it is desirable that the width of the sheet be seven times less than the length. Work begins with the addition to the center of one corner of the paper, then the second (on the other side). Next, a classic bomb is made, that is, the sheets open and fold again, but to the opposite side of the taken leaf. The next stage is the folding of the sash from the edges of the sheet bent towards the center. Similarly, a simple

Origami: continuation of work

Now you need to fold the opposite ends of the sheet, that is, connect two bent triangles. The figure is folded twice, the ledges themselves are laid out from the folded base of the ship. Everything, the starship is ready. It can be left white or colored with colored pencils, crayons or felt-tip pens.

Spaceship from the layout

How to make a spaceship out of paper if you want to create something larger, grandiose and complex? For this, there is a second option: the creation of courts using a layout and improvised stationery. Spacecraft are very different: separate, on stands, on the airfield or base, in front of the hangar for equipment. The resulting masterpiece can be used in games or even given to friends.

materials

So, how to make a spaceship from a mockup? First you need to pick necessary tools. It's cardboard, of course. colored paper, pencils, ruler, scissors and stationery glue. It is advisable to get also a thin adhesive tape.

How to make a boat: getting started

First, a sheet of cardboard is taken in hand, the height of the starship is determined. If it is supposed to look like a classic rocket, then everything is quite simple. A rectangle is cut out of cardboard, which must be rolled up with a tube. The latter is held together with glue. So the starship hull is ready. On another sheet of cardboard, draw the tail and wings, then carefully cut them out.

Terminating a process

When figuring out how to make a spaceship out of paper, you need to remember that all templates must be even, clear, and the lines neat. So, in the lower part of the future body of the starship, three slots are cut through, into which the cut out fins are inserted. Everything, you can proceed to the nose of the rocket. For this, an even circle is cut out with a diameter larger than the hull of the starship. It should be folded with a cone and glue the edges with glue or tape. The resulting nose is put on the body and fastened with adhesive or with the same adhesive tape. Now that the base is ready, you can cut out the decorations already from colored paper: stripes, decorations, portholes. They are carefully glued to the starship.

By figuring out how to make a spaceship out of paper, you can let your imagination run wild and make the spaceship you want. It can be a Soviet rocket or the famous "Firefly" from the series beloved by many. For greater strength, the figure can be fastened with tape or even metal clips.