Bow - he is always with us in life. When discharged from the hospital, the baby is tied up with a ribbon with a beautiful bow. Time goes by, bows adorn the clothes and head of an already grown princess. Mom has to master the art of making hairpins, ties, gift decorations in the form of bows. And what about the first trips to the birthdays of friends, because what gift is without exquisite design and the same paraphernalia in the form of a bow? Therefore, every mother simply must know how to make a bow from a ribbon, no matter how wide it is.

We pick up the child from the maternity hospital - we make out decoration for discharge

The birth of a child is not only a long-awaited, but also a solemn moment. A happy mother, a joyful husband, who has not yet fully realized that he has become a dad. Relatives in euphoria, because the long-awaited child was born. Diapers, sliders, nipples, bottles are purchased, the room is waiting for its new owner. Have you forgotten about the elegant bow for discharge from the hospital? In addition to decorating, you can also prepare an envelope, as it is done described in the article:.

How to make a bow from a ribbon for an extract from the hospital for a boy?

To make a decoration for discharge from the hospital for a boy yourself, you need to buy the following materials and these tapes:

• from the atlas, which will become the basis. She may be: blue, blue, green, purple, it all depends on the preferences of young parents. A width of 2.5 cm is perfect;
• satin white color for decor. It should be the same width as the main one;
• a candle, a lighter or a wood burner, are necessary for singeing the edges;
• scissors;
• ruler;
• tweezers;
• transparent glue;
• jewelry in the form of rhinestones, beads, pebbles.

Now let's get to work:

1. Initially, you need to assemble the main decor, since it will serve as the main decoration. The bow looks like flower petals superimposed on the base. In order to make it, you need to cut strips of eight centimeters of blue and white. Using tweezers, fold the petal and burn the edge.

2. On a round base, glue the resulting petals in several layers with transparent glue. Decorate with a bead or a strazik in the center. From a piece of ribbon, fold a loop behind the bow (as in the photo) so that the bow can move along the base.

3. The main ribbon can be about 1.5–1.8 m long. To make the ribbon for discharge from the hospital look original, it is necessary to decorate its ends. To do this, you need to make small bows, retreating a few centimeters from the edge. According to the above principle, make petals and attach them, as shown in the photo below.

It turns out so interesting original accessory for discharge from the hospital.

Video master class: how to make a bow from a ribbon for discharge from the hospital for a boy

Photo options for bows from ribbons for discharge from the boy's hospital

How to make a ribbon bow for a girl's discharge from the maternity hospital?

A lady should always look good, even if she was born just a few days ago. We offer to make an exclusive decoration for a girl to be discharged from the maternity hospital. For it you will need materials and such tapes:

• basic satin, 2.5 cm wide, Pink colour. It can be any color, as the young parents decide;
• white from satin, it should be about half as narrow as the main one;
• pink nylon (narrow);
• silver metallized;
• ruler;
• scissors;
• sewing threads;
• needle;
• transparent glue;
• tweezers;
• a candle, a lighter, or a wood burner, are necessary for singeing the edge;
• beads for decoration.

Making a bow for a little lady:

1. Initially, it is necessary to cut 6 pieces of each type of tape, including metallized. Burn the edges of them. Collect petals from the widest one with a needle and thread for sewing in a flower, make petals from all other ribbons.

2. Glue all the resulting petals to a large flower. Prepare 27 small petals from the main ribbon, as they are made described in the master class of a bow for a boy for discharge. On the base, it can be cardboard, felt, glue small petals on a dense fabric, and decorate the top with a bead.

3. Collect two parts of the flower, attach a ribbon at the back and the bow for the girl is ready for the statement.

Video master class on how to make a decoration for a girl's discharge from the maternity hospital

Photo options for bows from ribbons for discharge from the maternity hospital of a girl

Narrow, wide or thin ribbon, how to make a bow out of it?

Every mom can create a beautiful decoration in the form of a bow from a ribbon, no matter if it is narrow, wide or thin. This craft can easily decorate:

• any outfit, from a light sundress to an evening dress;
• gift set, packaging;
• hair on the head;
• home interior;
• table setting and much more.

Well, we will teach you how to make a ribbon bow.

1. Classic style.

2. Flower.

3. Two-tone decoration.

4. BantDior.

5. Tiered bow.

6. Strict bow.

7. Gift option No1.

8. Gift option No2.

How to make exclusive hair bows for a little princess?

Our mothers, collecting us to school, wove bows into their hair, but today everything is much simpler, since you can make various decorations for hair by hand. Young parents can create an exclusive jewelry with an elastic band or a hairpin for their princess and change them daily.

Hairpin "Motley flower"

For work you will need:

• four cuts of dense tape of different colors;
• four cut ribbons with a pattern;
• thin ribbons for decorating hairpins;
• hair clip;
• lighter for burning edges;
• scissors;
• needle and thread;
• rhinestone for decoration.

How to make a hairpin:
1. Trim the edges on the ribbons with a triangle.
2. Singe the edges.
3. With a needle, collect all the ribbons in the center.
4. Glue a pocket from a thin ribbon, fasten a hairpin in it.
5. Glue the hairpin and bow. Decorate with a thin ribbon on top.
6. Glue a strazik in the center.

bright butterfly

Need to prepare:

• colored ribbons of different widths;
• hairpin;
• needle and thread.

How to make a hairpin:
1. From the widest ribbon, make a bow as in the photo.
2. Perform the same actions with a ribbon of a different color and width.
3. Attach a hairpin, as described in the master class above.
4. Decorate with a bright narrow ribbon.

Ears Minnie Mouse

We prepare the material:

• pink ribbon 2.5 cm wide;
• a small piece of black tulle;
• thin black ribbon (hide hairpins);
• two hairpins;
• scissors;
• transparent glue.

How to make original ears:
1. Wrap tulle around the palm of your hand, as shown in the photo.
2. Bandage the resulting queens.
3. Cut the edges, fluff.
4. Decorate the hairpin, glue it to the resulting fluffy tulle. Glue, as shown in the photo, on the side.
5. A bow is formed from a pink ribbon.
6. Fold it into a loop, and wrap it in a folded piece in the center.
7. Glue the bow to the tulle and one ear is ready. Do the procedure again.

Merry bat

For such an accessory you will need:

• ribbons of two colors, one must be black, the second of your choice;
• hoop;
• transparent glue;
• decor for a bat.

Stages of work:
1. From black ribbons, make two circles of different sizes, as in the photo.
2. Glue the ribbons different color, make two loops.
3. Squeeze one of the loops into a bow, do the same with the second.
4. Connect them together and fix.
5. Paste the hoop with tape.
6. Insert the resulting bow into a circle of a larger diameter.
7. Attach a smaller circle from above, decorate the bat.

Dragonfly hairpin

Need to prepare:

• thin ribbons of different colors;
• hairpin;
• transparent glue.

How to make a hairpin: 1. Cut colored strips of different sizes, as shown in the photo. Make a base from a green ribbon (a hairpin will hide in it), and a mustache from a black one.
2. Put the cut pieces of ribbons one on one, fold and glue.
3. After collecting them into wings, wrap them with a green main ribbon.
4. Glue the antennae.
5. "Hide" the hairpin and stick the wings.

Elegant bow

For work you will need:

• ribbons of different colors;
• thin ribbon to hide the hairpin;
• barrette;
• tweezers;
• scissors;
• lighter;
• transparent glue.

How to make a hairpin:
1. Make squares from the tape.
2. According to the steps shown in the photos, use tweezers and a lighter to make a petal.
3. Repeat the steps with a ribbon of a different color.
4. Insert the petals one into the other.
5. Decorate the hairpin.
6. Glue the petals to the hairpin, tie thin ribbons with a knot and wrap the joint around them.
7. Glue the hairpin.

Azure bow

Prepare the following materials:

• thin ribbons, plain with a pattern, nylon;
• scissors;
• transparent glue;
• hairpin;
• rhinestone for decoration

How to make a hairpin: 1. Cut into three strips of the same color, different size.
2. Make eights out of them, glue them with transparent glue.
3. Make six-leaf flowers out of eights.
4. Connect them together.
5. Attach the flower to the decorated hairpin.
6. Finish by attaching a rhinestone in the center of the flower.

How to tie a bow decoration for a gift box?

Gift wrapping is the first thing a gift is evaluated for, so the question of how to pack it should be approached responsibly. The top presentation of a gift in the form of a package kindles the imagination, inflames desire, making the heart flutter, quickly see the surprise itself, which is hidden inside. Well, what is a gift without a beautiful bow?

Packaging Basics

A ribbon, which can be found at home or pre-purchased in a store, will help to beautifully pack the box. The box should be placed in the middle of the ribbon, which should be along the middle line of the box being packed, circle the edges of the ribbon around and tie on top without a knot. Smooth the resulting design, if necessary, correct the edges with scissors, singe the ends and you can give a gift. The larger the design on top of the box, the more attention it will attract to itself. Keep in mind that you will definitely need them.

Gift Wrapping Options

1. Decoration from a nylon cut.

2. A small bow to decorate a gift.

3. Volumetric option.

4. Unusual decor.

5. For any occasion.

6. Original and tasteful.

In this article, you learned how to make a ribbon bow for all occasions, now bring your ideas to life and delight loved ones with beautiful gifts, original hairpins, unusual decor.

When preparing a gift, not only its component is important, but also the aesthetic part. It is much more pleasant to present a beautifully decorated gift than a thing in the manufacturer's packaging. Sometimes just tying a ribbon bow on a gift is enough to make it look festive. That's what we'll talk about.

How to make a ribbon bow on a gift box with your own hands

If you have the skill, tying a bow from a ribbon is not difficult. Sellers of wrapping paper and various accessories for decorating presents masterfully cope with this. They did not learn this right away - once they also comprehended the basics of such a simple art.

We are offering to you three options how to tie a bow beautifully satin ribbon for a gift. Follow the instructions and everything will definitely work out.

For classic bow(also called "bunny ears") algorithm next:

1. Take the tape and visually divide it in half. Fold each end into a loop.
2. Put the right loop on the left in the shape of the letter "X".
3. Turn the right loop into the left.
4. Pull in the middle and make a knot.
5. Trim both sides of the bow.
6. Trim the ends diagonally.

classic bow

This bow is perfect for to female, and on male gift. By the way, there is an opinion that men do not need the aesthetics of the presentation and only the content is important to them. There is some truth in this statement, but, as you know, any rule has exceptions. Who knows, maybe it is your addressee who gives the presentation appearance great importance?

Decorate gifts for both women and men

Now let's tie big gift bow or "pompom". Algorithm such:

1. The ribbon is folded into a ring and wrapped around the center. The number of layers will be equal to the number of "petals" of the future bow.
2. Squeeze the ring flat and make four diagonal cuts.
3. Connect the ends of the aligned ring so that they meet in the center. The workpiece is fixed thin tape. Its color is matched to the tone of the main material.
4. Gently remove the innermost “petal” from one edge and move it to the other side. Do the same with other "petals".
5. The resulting bow is fixed at the base with a thin ribbon.

This pom-pom looks original. on a large and on a miniature box with a present. Depending on the size of the gift, you can increase or decrease the number of "petals".

Big gift bow

And finally, the third option - bow "Tiffany". Instruction by design:

1. Gift box measured. We are interested in the length of the lid and the height of both ribs from the lid to the bottom. All three values ​​are added and multiplied by five. As a result, it turned out optimal length ribbons for a beautiful bow.
2. The center of the tape is placed in the center of the box. To keep it from moving, hold it slightly.
3. The tape turns around. The ends cross on the opposite edge of the box (bottom).
4. The free ends are wrapped in a horizontal position around the cap. Then, twist them under the vertical tape.
5. A knot is formed above the ribbon from the same free ends and a classic bow is tied (as in the first method).
6. The ends are cut diagonally.

Bow "Tiffany" looks unusual and spectacular. Easier to tie on small boxes size.

Bow "Tiffany"

How to make a beautiful paper bow for a gift with your own hands

To create a paper ribbon bow for gift wrapping would need:

• colored paper;
• scissors;
• napkins;
• stapler;
• simple pencil;
• ruler;
• double sided tape;
• glue.

Using these materials, you can five various options paper bow for presentations. Let's bring step by step instructions for making jewelry.

Regular gift bow is done like this:

1. A sheet of colored paper is cut into strips 1.5 cm wide.
2. Cut the length of the strips. To create one bow, you need three strips of 25 cm, three strips of 22 cm, two strips of 19 cm and one strip of 9 cm.
3. All strips are folded in half.
4. The right and left parts are alternately brought to the fold mark of the strip. In the center, the ends are fastened with a stapler. We do this with all blanks, except for a strip 9 cm long.
5. Double-sided tape is attached to the bottom of each blank.
6. We collect the bow. We start with the largest blanks obtained from years of 25 cm. We cross them with each other. All other parts are attached in the same way.
7. A short strip is glued into a ring. It must be placed in the center of the bow.

Photo of gifts with a bow

Can be made multicolored bright bow to decorate a gift. To do this, you need to take sheets of paper of three different colors. We cut eight strips of each color: the first is 25 cm long, the second is 22 cm, the third is 19 cm. Each strip is glued with tips. A small circle (diameter 3 cm) is cut out of thick paper. All blanks are glued to it in a circle from long to shorter. From above, the bow is fixed with any decorative element - a button, a bead, a rhinestone, etc.

There are absolutely easy way. We take a beautiful sheet of paper and cut it into strips 25 cm long and 1.5 cm wide. It will take 20-25 pieces. Each strip is glued together with tips (petals are obtained). A flower-shaped bow is formed from all blanks. In the center it can be glued for strength. Then, the center is decorated with a paper circle, a button or rhinestones.

A photo gift box with a bow

If you want to do fluffy bow, then you need to take five ordinary napkins of the same color. They are stacked one on top of the other in an open form, and then folded in half twice. At the resulting workpiece, the upper corner is bent to the lower one - a triangle is obtained. It needs to be bent again and draw a semicircle. The future decoration is cut along the resulting line. From below it is fixed with glue or threads. It remains to straighten the bow and attach to the box.

Another easy way is accordion bow. You need to take two sheets of paper and fold each of them with an accordion. At the edges they are cut in a semicircle. Each "accordion" is folded in half. Glue is applied to one of the sides and fastened to the second part of the workpiece. After the glue dries, the decoration is neatly straightened. The same manipulations are carried out with the second "accordion". The finished parts of the bow are attached to the paper circle.

How to assemble a purchased bow for a gift yourself

If you do not want to do needlework, you can attach it to a gift purchased bow. To begin with, the box is tied with a ribbon, which is fixed to the knot. The ends can be cut off or made into a bow using one of the methods described above.

The purchased jewelry is attached to the box or ribbon using glue or double-sided tape. This design will give the gift a festive and solemn look.

Conclusion

If you still can't tie a bow yourself, don't be discouraged. You can always turn to those who decorate gifts professionally. Such services are inexpensive and are available in almost any locality.

Packing a gift - Big bow

There are only a few days left until the New Year. It's time to mobilize your imagination, time and financial resources and go on a pre-holiday gift hunt. We know for ourselves: to set aside a free hour or two for this in the midst of the end of the year, oh, how not easy. But it will have to. And so that even a present chosen in a hurry makes the donee's heart beat faster, do not forget to decorate the surprise beautifully. At least tie a bow. In the case of “your best present is me,” you can even take it on yourself. After all, these three bows will look beautiful and appropriate on anything (and on anyone) anywhere.

We saw how deftly they tie all these bows, knots, ribbons of a girl who wraps gifts in wrapping paper in the shop? No wonder they get paid for it. We, armed with the advice of bloggers, will teach you how to do this for free. Just choose one of the three instructions and follow it step by step.

Option 1: classic bow

Step 1: take a ribbon and, mentally dividing it in half, fold each end into a loop (not without reason in the West, because of the shape of the loops, this bow is affectionately called “rabbit ears”).

Step 2: We put the right loop on the left crosswise.

Step 3: Wrap the right loop over the left.

Step 4: Pull out in the middle, making a knot.

Step 5: equalize the lengths of both "ears", and cut the tips diagonally

Option 2: "pompom"

Step 1: fold the ribbon into a ring and wrap around the center in as many layers as there are "petals" on your pom-pom. Remember that for this type of bow, it is better to use paper ribbons, not fabric ones.

Step 2: now flatten your ribbon ring by squeezing it lightly with your hands. Make 4 diagonal cuts with scissors, as in the photo.

Step 3: connect the ends of the "flat ring" so that the cut edges meet in the center. Secure with a thin ribbon of the same color.

Step 4: and now, working only from one edge, get the innermost "petal" and carefully move it to the opposite side, then the next, third, fourth, etc.

Step 5: fix the resulting pompom at the base with a thin ribbon of a similar shade.

Option 3: Tiffany bow

Step 1: First, measure the box of the future gift. You need the length of the lid from edge to edge and the height of both "edges" (from lid to bottom). Add three values. Now multiply this number by 5. This is the optimal length of the ribbon to make a beautiful bow.

Step 2: find the center of the tape. Place the center of the ribbon in the center of the box. Hold it so that it doesn't "leave".

Terry bow(in foreign sources referred to as the ambiguous playful Pom-pom) will look more spectacular and more elegant if you take a ribbon of hard material that can hold its shape.

We turn it into several rings, the diameter of which is equal to the diameter of the future bow. We smooth the loops and make diagonal cuts as shown in the figure. We fold the loops again so that the cut out triangles are in the center of the folded strips of fabric lying in front of us.

Then you should tightly pull the slots with tape or wire and alternately straighten all the loops on each side of the bow, starting from the inside: one to the right, the other to the left, etc. Let's fluff up the bow - and mentally admire the beauty that, playfully, we just created.

classic bow out of time, fashion, space and circumstances. The main thing in this method of tying a bow is that the ribbon does not wrinkle when tying.

Strict bow. Fold the ribbon in half as shown in the picture. We fix the junction of the ends of the tape with glue and smooth it with your hand. We take a small piece of tape (you can use a different color) to wrap it around an unsightly joint. We glue the ends of the second ribbon on the back of the product - and the bow is ready.

Tiered bow. To beautifully tie such a bow, you should take three ribbon cuts of different widths and colors. Cut them so that the widest piece is the longest, and the narrowest is the shortest. Form the ends of the bow. Now tie the folded pieces together with another piece of ribbon, leaving long ends to secure the tiered bow to the gift bag.

Two color bow. After such manipulations, dealing with a two-color bow will be as easy as shelling pears. We take narrow and wide ribbons of different colors. First, we form a loop from a wide satin ribbon, fastening its ends with glue, and then we do the same with a narrow ribbon superimposed on it. We iron the resulting “sandwich” tightly with our hands and fix it from the inside in the center with glue or a paper clip. The bow in its final form is formed with a third ribbon long enough to tie to a gift bag or box.

Bow "Dior". Some say that the Dior bow is a complicated version of the "strict" bow. We glue the “rings” from pieces of tape of different lengths, which we then connect with each other using glue or a stapler. A half-finished bow is placed on the base - a ribbon with cut ends. And with the third - small - piece of tape, you should mask the paper clip by gluing its ends from the inside of the bow.

Bow flower. The first step in creating this fantastic flower will be a simple ring, which you will make from ribbon, holding it with your thumb and forefinger. This movement should be repeated until there are more than ten such rings in the hand - depending on the desired size of the bow. We will tie the rings in the middle with a long narrow ribbon, straighten the loops one by one - and fix it on the gift.

Chrysanthemum bow. Tying a beautiful chrysanthemum bow is much easier than it seems at first glance. This will require strong tape, wire, scissors and a little more patience than in previous versions. The beginning of the production of "Chrysanthemum" resembles the work on a terry bow. But after fastening at the place of the incision of the ribbons with wire, it is time to give them the appearance of curly chrysanthemum petals. To do this, even cuts are made on the loops folded together. After that, we begin to straighten the “petals”, turning the loops to the right, then to the left, starting from the inside, first from one, and then from the other side of the bow.

And, finally, one more - simplified - version of a bow-decoration with curly petals made of plastic braid. We take about a dozen thin hard ribbons and cross-tie the gift with them, fastening the intersection of the ribbons with a tight double knot. Then we tie the most ordinary classic bow. Let's cut its loops in half, iron each between the blades of the scissors - and we have another magnificent spectacular decoration.

Small matter: pick up a beautiful gift under the bow - go on a visit!

A bow is the main decoration of any gift. Whatever packaging you choose, no matter how you decorate it, it will always be he who crowns this creation. Since bows and bows are integral components of the design, there are many ways to tie them. Let's get acquainted with some of them, the most common.

It is sometimes difficult to explain the sequence of intricacies of the tape in words, especially when there is only one tape. The photo does not always clearly show the location of the tapes relative to each other. That is why, in some cases, instead of a photo, bow tying patterns will be given, which will become the tool with which you will learn how to tie all kinds of bows and bows.

classic bow

This bow stands out of fashion, time and competition. Having issued a gift in this way, you can be sure that both women and men will like the bow. The main condition is that the tape should not wrinkle when tying. Everything else is done according to the scheme.

And this is how this operation will look in the photo.

The simplest bow

The easiest way to tie, but it looks not at all simple.

1. Fold the ribbon in half. The ends of the tape must be glued with an overlap.
2. Take a piece of tape of a different color and close the joint with it. Glue the ends.

double tier bow

The bow is ready!

three tier bow

To create such a bow, we need exactly the same strips of ribbons as for a two-tiered one. Only we will arrange these strips in a slightly different way.

1. Cut corners at the ends of the strip.
2. Fold the strips one on top of the other and tightly bandage the middle.

The bow is ready!

two color bow

1. Take two pieces of ribbon of different widths and colors.
2. Make a loop with a wide ribbon and glue the ends together.
3. Put on a wide tape narrow. Glue the ends.
4. Fix the ribbons in the center.
5. In the place of fixation, tie a knot with a new tape.

Bow "Dior"

1. Cut three pieces of different lengths from one tape.
2. Glue each piece into a ring.
3. Lay the ribbon rings on top of each other and fix in the center.
4. Cut two more pieces from the tape. Glue one of them into a ring and glue it to the center of the future bow. With another piece, close the junction of all tapes.

Bow "Flower"

There are two ways to tie such a bow: with different length"petals" and with the same length.

Graduated bow "Flower"

This bow will turn out with different lengths of "petals".

1. Leave a tail long enough on the ribbon so that you can then attach the bow to the package.
2. Fold the tape so that each top layer is shorter than the previous one.
3. Fasten in the middle and unfold.

Bow "Flower" with the same length of "petals"

Such a bow is made in the same way as the previous one, but the length of the “petals” is taken the same.

Bow "Terry flower"

Such a bow is well obtained from any ribbons, including paper ones.

The bow is ready.

This is how the manufacture of the bow looks in the photo.

Bow "Chrysanthemum"

"Chrysanthemum" can only be made from stiff paper tape, which is used to wrap gifts and flowers. A bow is made in the same way as the “Terry Flower”, but before you start straightening the bow, the “petals” of the flower must be cut along dotted lines with an arrow.

Original bow "Elephant"

A gift can be decorated not only with classic bows, but also with unusual ones.

You will need two tapes: wide and narrow, elephant eyes and glue.

Let's start manufacturing.

1. Cut two pieces from a wide tape: 9 centimeters and 27 centimeters.
2. From a long piece, make ears by folding it in half and gluing the ends of the tape.
3. Make a trunk from a short piece: attach part of the tape to the middle of the ears, and glue the rest vertically.
4. Make a small bow out of a narrow ribbon.
5. Glue on the elephant's eyes.

Elephant-bow is ready!

How to attach a bow to a gift box?

tie beautiful bows you learned, but now the question arises how to attach these bows to a gift box. There is nothing easier, and you will see it now.

Tie the gift box with ribbon and secure the knot.

Now there are two options: attach a bow to a ribbon or tie a bow from long ends ribbons. The first option is self-explanatory, so consider the second, and at the same time learn how to tie another type of bow.

For ease of execution, we denote the ends of the tapes with the letters A and B.

Bow wrapping is ready!

Decorating gifts with bows gives them a festive, solemn look. Bows decorate whatever your heart desires, absolutely any gift. Now that you have learned how to tie different bows yourself, the problem of decorating a gift will not give you any trouble.