Content

Sooner or later, everyone has to learn how to tie a bow: both men and women. And if someone is limited to tying shoelaces, then someone discovers the real art of creating magnificent products that can decorate and holiday hairstyle daughters, and wedding cars, gifts and clothes, interior and even pets. To create, you can use both a traditional ribbon and very unusual materials, and to master tying, you can turn to a master class.

Classical

This is the most common and, at the same time, the simplest option, for the creation of which you do not need anything other than:

1. satin ribbon;
2. Scissors.

1. Cut enough tape first.

2. Then fold it, according to the illustration, crossing the folded sections.

4. Then one of the sections must be skipped into the resulting ring.

5. And tighten the knot. Now you can straighten.

Strict

To create it, you will need more materials and tools:

1. Satin ribbon of the main color;
2. Section satin ribbon for decoration;
3. Fabric glue or clear instant glue;
4. Scissors.

1. Cut off a piece to the size of the future bow.

2. Fold it, according to the method indicated in the figure.

3. The connection is fixed with glue.

4. Then this area is gently smoothed out.

5. Now the junction is closed with a finishing tape and the resulting bow is wrapped around it.

6. On the reverse side and carefully glue it.

These bows can be made from different materials, and they are good for decorating shoes, accessories, in particular, bags, as well as children's and women's clothing.

Longline

To make this multi-tiered bow, you will need three types of satin ribbon of different widths, a small segment of a narrow one to secure the entire structure, and scissors.

Colors can be different, the main thing is that the bow turned out to be harmonious and fit the range chosen for the entire festive package.

1. At the ends, folding them lengthwise, make triangular cutouts with scissors.

2. Then put one on top of the other, from the widest to the narrowest.

3. The resulting blank in the center is intercepted with a narrow ribbon, tied into a knot, and the long ends are used to bandage the box ..

Bicolor

Despite the ease of manufacture, the bow looks very impressive. To create it you will need:

1. Two types of tape of different widths;
2. Narrow tape;
3. Fabric glue or other transparent glue;
4. Scissors.

1. The tapes are laid one on top of the other, then a ring is made from them, which is carefully glued together.

2. Now the center of the doubled ring is intercepted by a narrow auxiliary one.

3. The bow is smoothed, and the knot is fastened with glue.

4. After tying, there should be ends of sufficient length to cover the gift being made out.

Openwork "Dior"

An extremely effective bow for decorating magnificent gifts will require a little more strength than previous samples, but after a little training, the design will no longer have secrets. To create this splendor, you need to prepare:

1. A skein of satin ribbon of the desired width and color;
2. Fabric glue or stapler;
3. Scissors.

1. Cut off four segments of ever-increasing length.

2. Rings are glued from these segments.

3. Then these blanks are superimposed on each other so that the bottom is the most big ring, and on top - the smallest.

4. In the center, the resulting workpiece is fastened or carefully glued together.

5. Now this place can be covered with another piece of tape, which sticks together with reverse side bantha.

It is important not to wrinkle the design during manufacture, but to gift box the bow can be glued with double-sided tape or tied

DIY flower gift

If the previous bow is mastered, then it's time to move on to the study of the most elegant and complex decoration. For a flower, it is important to take a sufficient amount of the main tape and a narrow additional tape to pull the structure.

1. First you need to form a ring from the tape, holding it with your thumb and forefinger.

2. Following the example of the first ring, about ten more similar ones are made. In this case, it should be noted that the more turns will be on the fingers, the more magnificent and denser the bow will turn out.

3. When all the planned turns are made, the bow in the center is pulled with a narrow auxiliary tape.

4. The bow can be straightened and decorated with a gift or costume.

Elizabeth Rumyantseva

For diligence and art there is nothing impossible.

Content

Is it hard to imagine a solemn moment without decorating or decorating with elegant bows? Lush and strict, elegant and frivolous - they create a special mood at the holiday. Making a hairpin or a bow tie for an evening dress from satin ribbons is not difficult if you follow the instructions.

How to make bows from satin ribbons

Jewelry assembly technology requires ribbons different color, special width according to your idea. You will need a minimum set of tools and materials for manufacturing. In the case of passing the master class, you will not have a question about how to make a bow from a satin ribbon. Suggested step by step instructions turn the process of work into a pleasant and understandable. You will need:

• lighter;
• scissors;
• threads;
• needle;
• ruler;
• glue or heat gun.

Depending on the purpose of the bow, there are various options for manufacturing technologies. He might be:

• small, made using a fork - suitable for decorating a postcard;
• magnificent, elegant - in the style of kanzashi - for a holiday in kindergarten;
• a strict bow tie - for an important banquet;
• double - for decorating hair, attached to a headband or hairpin,
• solemn - on a gift box.

Satin bows can be made in the form of an original flower. If you choose the right color and shape, they will become unique decorations:

• elegant evening dress;
• frivolous sundress;
• styled hair;
• in the form of a bracelet on the hand;
• stylish handbag;
• bridesmaid dresses;
• elegant blouse;
• as a pendant around the neck;
• furniture in the interior;
• stylish dress for graduation party
• curtains in the apartment.

How to make a classic satin ribbon bow

The most popular and simple, this bow is used to decorate clothes and interiors. Even a modest gift, decorated in this way, becomes elegant, solemn and attractive. To tie a bow you will need:

• take a workpiece 20 cm long;
• burn the edges
• fold in half with the smooth side inward;
• bend the edges outward again;
• pick up, so that each has a loop at the top, and a bend between them at the bottom;
• cross the folded parts in front, forming a ring under them;
• pass one loop through it, tie.

Strict beautiful do-it-yourself satin ribbon bow

You can tie a strict stylish bow for a special occasion. It will become an ornament. handbag, dress or gift. Here it is important to choose the right colors for crafts so that it looks elegant. How to make a bow from a satin ribbon, for example, such as in the photo. Prepare scissors, glue, material of three colors for work. You should:

• take a blank 30 mm wide with a length of 18 cm;
• roll into a ring;
• connect the edges with glue.

The next steps to assemble the decoration are:

• fold the ring so that the seam remains at the bottom in the middle;
• iron;
• take a ribbon of a different color of the same width, with a length of 7 cm;
• wrap a ring around the workpiece across;
• fix with glue;
• prepare a tape of a contrasting color of the same length, but thin;
• wrap around, in the middle of the previous ring;
• seal;
• iron.

Two-tone beautiful bow from a satin ribbon with your own hands

A stylish and very elegant decoration can be assembled from blanks of two colors. Ease of manufacture does not mean that it will look modest. Elegant and spectacular, it will decorate the hairstyle and the original dress. You will need a wide and narrow blank. To make jewelry:

• measure 2 pieces 15 cm long - one narrow, the other wide, cut off;
• put one on top of the other;
• roll into a ring;
• fix the joint with glue;
• iron;
• tie a bow in the middle with a narrow ribbon, closing the junction, forming a knot;
• cut off the ends;
• glue.

DIY gift bows from satin ribbons

An anniversary or birthday gift box will look much more impressive if you decorate it with a bow. It can be, depending on the situation, small, elegant or voluminous and lush, for example, like this. It is very easy to tie it - you can quickly learn, even without a master class, following the instructions:

• take a workpiece two meters long;
• wrap it around the open palm of your left hand;
• remove carefully;
• leave the end free.

• on a workpiece folded in several layers, cut off both corners on one side, by about 5 mm;
• burn it so that it does not bloom;
• repeat operations on the other side;
• fold the workpiece so that the cut parts are aligned in the middle;
• tie with the free end of the ribbon;
• straighten each petal, giving it volume.

A lush bow made by yourself can please a young beauty if it is woven into her hair or becomes an ornament. gift box. For its manufacture, you will need 6 blanks 12 cm long, 5 cm wide, the same number 11 cm long and 30 mm wide. First, they need to be burned around the edges. You will also need elegant thin braid, small beads and a piece of felt. Next, you need to do this:

• take wide blanks;
• fold in half;
• sequentially collect on one thread;
• pull, fasten;
• repeat the process for narrow ribbons;
• cut a circle with a diameter of 40 mm from felt;
• stick a large blank on it;
• take pieces of thin braid 12 cm long - 6 pieces;
• fold each into a ring;
• glue on the front side by laying on the petals;
• fix the workpiece from a narrow ribbon on top;
• pour glue, approximately 10 mm in diameter, onto a piece of fabric;
• lay the beads on it tightly in a circle;
• cut in a circle;
• glue the decor in the middle of the decoration.

If you want to decorate holiday card tiny bow, try using a fork. The process will go like this:

• take a fork in your left hand;
• loop a ribbon over it so that the edges remain on the right;
• throw the far end behind the fork through the lower one in front;
• insert it in the middle between the teeth and bring it back;
• enter the remaining tip of the ribbon on the right into the same gap, but from above;
• turn the plug over and tie both ends with two knots;
• remove the bow;
• cut the ends, singe.

DIY openwork satin bow

Do you want to learn how to wrap gifts like at Dior? The technology will not cause difficulties, and the view will be unusual and original. For manufacturing, you need satin blanks 25, 20, 16 and 10 cm long. To make such an ornament:

• burn the edges of the ribbons;
• roll the longest into a ring;
• glue the ends;
• repeat operations with other blanks;
• stack all the rings on top of each other, starting with the larger one, place the glued sections from below;
• pass an additional ribbon on top of the rings (as an option, it can pass inside the small element);
• fasten on the back.

Good day, my dear friends! When the time of the holidays approaches (especially the last calls and September 1), such an item as a ribbon bow becomes especially relevant. This accessory is so popular with schoolchildren, mothers and just needlewomen that I could not get around it and decided to dedicate a whole post to bows.

All sorts of bows are actually found in our lives so often that we don’t even notice it - in jewelry, clothes, they are even used as an element school uniform… In general, if you want to learn how to make bows from the most different types ribbons, welcome!

Beautiful do-it-yourself ribbon bows: master classes

In fact, learning how to tie even the most complex bows yourself is not so difficult. Instructions with a large number of photos, which I have prepared for you in abundance today, will help with this. There will be both selections from the Internet and unique master classes specially prepared for you.

How to make satin ribbon bows: step by step instructions

Satin ribbons are the most popular material for creating small masterpieces. Smooth, shiny, relatively inexpensive ribbons have always attracted the attention of needlewomen from all over the world. The material has found application in various fields of creativity, not an exception for steel and decorations based on various kinds of bows.

To create accessories, you can use ribbons of different widths, but it all depends on the chosen design and execution technique. Let's start with the simplest types.

The simplest classic bow

A basic bow that any beginner should learn to make is shown below. For him, you can take both a narrow and a very wide tape - it will turn out from any.

Work process:

1. Fold the ribbon over the two halves of the ribbon over the index fingers of both hands.
2. Cross the halves and slip one into the other.
3. Tighten the product. Ready!

Based on such a bow, you can make chic decoration. It will be enough just to fill it with waterproof glue or shiny acrylic varnish, then attach the rings to which the chain will be fastened.

It will not be difficult to tie the same bow on a fork, with its help it will turn out to be more accurate and even (although you can create a very beautiful accessory on your fingers). There is also a limitation for such an “assistant” - it is useful only when creating very small bows, for larger products you will have to resort to the traditional method.

double tape

The double bow is performed in a slightly different way from the previous one. Two rings of tape and a separately created center, obtained by sealing the edges, are useful for it.

Fold two rings in the middle and sew or glue so that they are in contact with the side parts. After that, the middle is closed with a pre-made part. The design can be attached to a hairpin or elastic band.

Note!

For this accessory, you need to take a medium or wide ribbon; such beauty will not come out of a thin, narrow material. If your choice goes to a width of 2.5-5 cm, then this will be the ideal solution.

A variation of such a bow of two ribbons can be such an analogue: in this case, two rings are superimposed in the middle on each other. You can also experiment with colors - for example, create a red or green bow, or even combine one or more shades in one product.

Try to make more than two layers, take ribbons of different widths and textures. Thus, from one scheme for creating a bow, you can create a wide variety of accessories.

Layered puffy bow

A great option for schoolgirls and not only. Such a bow is easy to put on a hairpin or comb to attach to your hair. It is based on two simple bows discussed earlier.

To fold this, you will need to make a base of two overlapping layers. From the ribbons folded in this way, the back will be obtained. The front is similar to the simplest first bow. At the end, they must be connected with glue or thread. Everything is held together by a central piece.

In this way, you can get more voluminous accessories, like the white bow below. There is one difference here - the basis is not two layers, but three.

Romantic and sophisticated, this addition to the image will please any graduate who wants to indulge in nostalgia. But this option, unlike jewelry for girls, is more adult and feminine, and this is exactly what is needed in such cases.

Twisted bow of 3-4 ribbons

Very beautiful bow, which is well suited for decoration on the head. To do this, three or four (or even more) pieces of tape of the same width, but different lengths you need to sew with the sign of infinity and put one into the other. Draw the middle as in a few microns earlier.

Kanzashi

Many beautiful bows are made using the kanzashi technique. This type of creativity came, as you might guess, from distant Japan. There, in this way, magnificent details are created to complement not only everyday, but also festive outfits.

Bow flower

Making such a flower is not difficult, but painstaking. You will need at least 12 petals, which will need to be pre-cut from a ribbon 2 and 4 cm wide (you can take a different width, but not less than 1.5 cm).

First, make the first layer by stringing six wide petals and pulling them together. Put some kind of decoration between the layers and attach the second layer made in the same way. Don't forget the bead in the middle.

Another variation of simple but beautiful petals is located below. Here the flowers come out more pointed.

More graceful White flower created below. IN step by step photos you can see that the flower petals are made by twisting the ends inside the middle. Such a bow can consist of either a pair or five or six layers gradually increasing in number of elements.

Bow for discharge from the hospital

Newborns (and children in general) deserve the best! That is why I have found for you a beautiful bow that will suit both girls and boys. For it, you will need a sufficiently long tape (at least three meters).

In the middle, make a winding of several layers and then a knot as in the photo. After that, you will need to pull out a few petals formed by previously folded rings.

Why leave such long ends around the edges? The fact is that you will need to tie them around the long-awaited bundle, leaving a beautiful center in front. At one time, I generally purchased a five-meter ribbon - the nurse imposed such beauty from it that we still remember with a smile with the whole family.

How to tie a ribbon bow

Rep ribbon is good because, unlike satin, it is less prone to various kinds of damage. Satin should only be hooked once and that's it - appearance bow is damaged. With reps, such a trick will not work, but it also costs more.

Baby bows

The combination of several types of tapes looks very interesting. In this case, colors are also combined, which, nevertheless, look very organic. The polka dot ribbon is just perfect! Such a bow will decorate the girl's head for a holiday and in Everyday life. For him, you will need to connect two tucked parts, as was seen earlier in the master classes. The top will be decorated with a classic variation.

On an elastic band

Collecting a magnificent bow on an elastic band is not difficult. To do this, you will need several layers of bows, decorated as we did earlier. The number of layers is limited only by your imagination and common sense. The difference of this accessory is that under it there is a semblance of crosses with serifs at the ends.

You can connect all this splendor with ribbons 1 cm wide, bandaging the middle. You can attach a bow to the elastic with a glue gun or something similar.

A bright school-themed bow explodes early ideas of what a school accessory should be. It's just a bomb!

Butterfly bow

With the help of rep ribbons, you can even make a semblance of a tie! Yes, the butterfly will turn out small, but very effective. To create it, fold the ribbon, bending the edges under each other, as in the photo below. You will need three of these layers. Under them, attach a longer ribbon so that you can tie it at the back. In MK it is very short, in this form it can be left for a simple accessory.

And here is another fun variation of a bow tie. Nothing more or less bird feathers are used here, connected by a ribbon in the middle. An interesting interpretation of the standard butterfly, isn't it?

By the way, a butterfly bow can also be made from fabric, a master class on this below.

Bows for gift boxes

To tie a bow on a gift box, you will need not only ribbon, but also different types of wrapping paper.

big bow

A very large accessory for a very large gift. Such a bow can be made from a ribbon, but it is better to use wrapping paper, which will take a lot for such a work.

Insert a small box into the base of the decorative element. It may be a surprise or it may just be the basis for such an accessory. Place it in the center of the square, which close its edges at the top and bottom. Tuck the free edges as in the photo below (as if wrapping an envelope). Press the middle and wrap it with a small piece of paper of sufficient length. Straighten the edges to make them as fluffy as possible.

This bow can be used on its own or as a decorative piece for a huge surprise.

Beautiful for a gift

The next fluffy bow has an incredible Christmas mood. They literally breathe from him! For this, you will need to fold the ribbon as shown below, overlapping and tying several layers together.

Place a few bows on top of the structure, folded as shown below. Decorate the middle with a beautiful bear in a cap or any other decorative element.

Paper bows: simple, cheap, original. All master classes describe their creation in great detail.

Do you want even more bows for a gift? Read about it in another article.

Nylon bows

Nylon ribbon is traditionally used for graduates and hair decoration. But for other purposes, such bows can be used.

A simple bow on a fork is created in just a couple of minutes. To do this, you take a fork, thread a thin ribbon in the middle, thicker on top of it. Wrap the thicker ribbon around the tines of the fork many times, forming a braid. A thinner ribbon becomes the central part of such a flower.

A semicircular metal template will help to “cut” the petals with a small resemblance of a soldering iron. To do this, two ribbons - nylon and satin - must be folded as shown below. After that, the middle is bent inward and you will need a lot of such petals. They merge into one layer, then another, and so on, until you get a fluffy layered bow that can be used to decorate hair.

In the next accessory, nylon ribbon is used only as an additional accessory, decorating the base made of fabric. You can create such beauty in a few minutes, and decorated with a nylon ribbon, it will look even richer.

The next bow belongs to the gift category, but I decided to put it in this section, because it is made of nylon ribbon. For it, you will need to fold the tape in many layers, and make an incision in the middle, which will need to be tied with a thin fishing line, around which the ends should be tied. The most important step is coming: you need to pull out all the ends of the folded tape to get a very magnificent design.

Such a bow will decorate a Christmas tree or simply decorate an apartment.

A similar accessory can be made from a denser ribbon and even from burlap. It will be more difficult to pull out the ends, but the effect will turn out to be more unexpected and extraordinary.

Photos of other beautiful bows

How are they not made out! In the form of elegant brooches, bracelets and much more. For example, the accessory below will be an interesting addition to a festive outfit.

Another lace bow with a bead inside.

In general, thanks to lace, even the simplest design begins to look more original and festive.

Just look how you can spruce up your pen by adding layers of lace and satin ribbons to it.

A bow on the rim will turn an ordinary girl into a doll hurrying to the ball.

Roses as bows. Great, isn't it?

The bow on the dress looks very impressive and original.

Sincerely, Anastasia Skoreva

Ribbon bows can be used anywhere. Their use will add originality to everyday life, decorate gifts for the holidays, help create a unique hairstyle. There are many options for tying bows, from the simplest to the most complex and incredibly beautiful.

Bows are made from specially designed ribbons.

Tape materials:

• atlas;
• organza;
• tulle;
• reps;
• capron;
• paper;
• lace;
• cotton material.

Table of features of materials for tapes:

Material name	Positive sides	disadvantages
Atlas	strength; durability; with proper care, the material does not lose shape; completely safe; absorbs moisture; not electrified.	The fabric is heavy, shrinks when washed in hot water, the raw edge crumbles rapidly
Organza	strength; dimensional stability; tissue deformation is completely excluded; rich appearance; does not require special care.	it costs expensive; unpleasant to the body; does not pass air well; working with such a fabric is quite difficult.
tulle	elastic fabric; light and durable; does not wrinkle; keeps heat well and passes air; dries quickly; affordable.	The material does not tolerate high temperatures, electrifies
Reps	strength; density; keeps its shape well; passes air and absorbs moisture; does not wrinkle.	Cotton fabric shrinks when washed in hot water, silk and woolen fabrics should be washed by hand only and dried in a horizontal position.
Kapron	strength; ease; smoothness; the material repels pollution; does not deform; does not wrinkle.	fully synthetic material; fades in the sun; does not absorb moisture; does not warm.
Paper	Great variety in color scheme, high gloss, easy to work with	Wrinkles and does not smooth out, easily damaged
Lace	Elegant appearance, elasticity, the fabric is breathable	Requires special care: do not squeeze, do not overdry
cotton material	Natural, warm, durable, pleasant to the touch fabric.	Easy to wrinkle, difficult to smooth, shrink, fade after washing

Instruments

To make your own ribbon bow, you will need:

• ribbons as the main material;
• ruler for measurements;
• well-sharpened scissors;
• tweezers for fixing the ends of the tape;
• a source of fire for singeing the ends;
• glue.

beads and rhinestones are used for decoration

Before making bows from ribbons, the following nuances should be considered:

• for a correctly made product, the front side of the tape should be visible, the wrong side - hidden;
• slices must be singeed;
• in order not to spoil the shape of the material, it is not recommended to leave the ribbons tied for a long time;
• if the bow will be used as a decorative element for clothes, the material of the bow must be compatible with the material of the clothes in its texture;
• to determine the correct length of the ribbon for wrapping the box, you need to make 2 turns of the ribbon around the box and add at least 60 cm for the bow;
• when tying a bow, it is important to leave the free ends of the ribbon as long as possible, and then shorten it with scissors;
• You can shorten the ends in one of 2 options: cut diagonally or in a V-shape.

for gift boxes and bouquet arrangements, it is more convenient to use a ribbon with a wire inside, the product will retain its original appearance for a long time.

How beautiful to tie a bow from a satin ribbon

How to tie a bow from a satin ribbon in a classic variation:

• determine the middle of the tape;
• put the tape on the index fingers, the loops should be equal, the bottom of each loop is clamped with the thumb;
• cross loops;
• pass one loop into another;
• tighten the knot.

To make a strict bow from a satin ribbon, you must:

• lay out a strip of material on the table and determine the middle;
• each edge of the tape is fixed with glue in the middle of the tape (with the correct addition, the side view resembles an infinity sign), smooth;
• a small piece of tape (you can use a different color) wraps the joint;
• glue the ends on the back of the bow.

To tie a double bow, you will need 2 ribbons of the same length.

1. The ribbons are folded together.
2. Throw 1 loop on the index fingers.
3. Cross the loops.
4. Pass one of the loops into the ring formed from below, tighten.
5. Smooth out the finished bow, straighten the ends of the ribbon, you can hide them inside the bow loops.

The double bow can be done in a different way, and it will look a little different:

• take wide and narrow tapes of the same length;
• place a narrow tape on a wide one, glue the ends;
• fold the tape around, fasten the ends;
• the junction of glued opposite ends is located in the middle of the bow, the junction is fastened to the parallel part of the future bow;
• wrap the place of contact with a thin tape.

On the neck

You can tie a bow in the shape of a butterfly around your neck from a ribbon in one of 2 ways:

1. Throw the ribbon over the neck, cross the ends.
2. Pass up the right end of the tape, lower it down. The right side of the tape should wrap around the left side before crossing.
3. Now the left half of the tape wraps around the right, which is in a horizontal position, and is passed into the loop. At the end, the knot is tightened.
4. Position the ribbon around your neck so that its ends are of different lengths. Cross (and the longer part should be on top).
5. Grasp the short part of the tape with this part and lower it down.
6. Fold the short end in a semicircle.
7. The long part is located in front and also folds in a semicircle.
8. Pass through the loop behind the 1st half bow.
9. Tighten, straighten.

A voluminous bow around the neck is tied like this:

• wrap the neck with a ribbon;
• form loops;
• weave and tie;
• straighten the bow.

On the dress

How to tie a ribbon bow on a dress:

• the ends of the decorative strip are folded in loops, crossed;
• the place of crossing is fixed with glue (in this case, rhinestones are glued on top) or with a decorative pin;
• attach the accessory to the dress.

On the belt

To beautifully tie a bow at the waist, you must follow this procedure:

• wrap a ribbon around the waist;
• fold the ends with 2 loops, cross;
• skip 1 element into the formed loop;
• tighten.

An original solution for decorating the waist would be a bow with one loop.

Order of execution:

• the tape wraps around the waist, its ends should be different in length;
• a loop is formed from a long piece of tape and crosses with a short end;
• the loop goes down, wrapping around the short end of the tape;
• drags on;
• the length of the tape ends is adjustable.

How to tie a beautiful ribbon bow on chairs

IN Lately it became fashionable to decorate the backs of chairs with bows. The decoration of chairs should be treated very carefully: the color of the bow should match the nature of the event. In order for the bow to retain its shape for a long time, it is better to choose hard materials (organza), the edges of which must be well processed.

Most often, the backs of chairs are decorated with classic bows.

It ties like this:

• wrap the back of the chair with tape;
• make 2 loops at the free ends, cross;
• with one loop wrap the other with a movement towards you;
• tighten, stretch.

Another option for tying a ribbon on the back of a chair involves placing the decoration under the top bar.

Description:

• the tape is folded in half;
• hang the tape on the upper crossbar, while the loop is located on the inside;
• the tails are threaded into the loop, tightened.

How beautiful to tie bows on September 1

You can tie it in one of 3 ways:

• pleated bow;
• 4 petals;
• luxury flower.

For the 1st option, you will need a wide ribbon and an elastic band.

1. The hair is gathered together and tied with an elastic band.
2. Then the hair is wrapped with a ribbon, one edge of the ribbon is left long, the other short.
3. The long end is folded several times and tied with a short one. The bow is ready.

Bow "4 petals" is done like this:

• the collected hair is wrapped with a ribbon and tied into a single knot, the ends of the ribbon should be the same;
• loops are folded from the tails and tied with a classic bow;
• the remaining ends are also folded and tied.

Before creating the next hairstyle, the tape must be prepared:

• sew the tape along the center;
• assemble with an accordion;
• give the ribbon the shape of a bow or flower and sew.

Attach the bow to the elastic band, gather the hair together, pull it off with an elastic band.

Bow on a gift box

Volumetric bows will always be appropriate on gift boxes.

Making a bow-ball:

• fold the tape in several layers;
• cut the corners of the resulting rectangle;
• move the slices to the center by gently moving the tape;
• tighten the narrowest part of the tape well;
• pull out all the loops in turn, forming a ball.

To create a lush bow, you will need 3 ribbons of different widths.

1. Lay a strip of medium width in 4 layers, the layers should be located one above the other.
2. Also fold a wide strip and arrange the tiers crosswise.
3. Place the 1st bow on top of the 2nd.
4. Pull the center with a thin tape.

Large fluffy ribbon bow

To create a large bow, you will need a very wide ribbon, from which a square is cut first.

1. It is necessary to place the base (a small strong box) in the center of the square.
2. Top and bottom cover the base with the edges of the tape.
3. On the short sides of the resulting rectangle, make several folds.
4. In the middle, where the base is located, collect the tape and tie it.
5. Straighten the loops of the bow.

Wide ribbon bow

A bow made of a wide plain ribbon will look very beautiful and original if a narrow strip with an ornament runs along the central line along the entire length.

Bow creation scheme:

• lay out a wide strip of tape on the table;
• along the middle line and along the edges, attach a narrow bright strip or a strip with a pattern with hidden stitches;
• wind the finished strip of fabric around your hand;
• tie;
• remove from hand and straighten.

From thin tape

For lush bows, a decorative strip of thin fabric is more suitable.

How to tie a bow from a ribbon is clearly shown in the photo

For crafts you need:

• lay a strip of fabric over its entire length in turns, the turns should be located one above the other. The more turns, the more magnificent the bow;
• tie tightly in the center;
• straighten;
• arrange the rings in a circle.

From a narrow band

How to tie a small ribbon bow in the shape of a flower:

• cut the tape of the desired length (at least 100 cm);
• measure 20 cm from one of the ends and form the 1st loop about 3 cm long;
• Make the 2nd loop in the same way from the opposite end;
• Make the 3rd loop from the opposite side near the 1st, continue until the entire strip of fabric is involved;
• carefully tie the center of the folded strip of fabric with a special wire;
• wrap the wire with tape;
• spread the loops around.

From kapron tape

To make a magnificent bow from kapron, the ribbon must first be well ironed and treated with fire.

1. Now the tape is folded along the center line and sewn with small stitches along the fold. In this case, the thread should be strongly tightened.
2. Twist the stitched tape spirally.
3. Sew the edge gathered with an accordion.
4. Attach the finished bow to the elastic.

A voluminous nylon bow can simply be tied on the hair.

For this you need:

• collect hair in a ponytail and wrap it with a ribbon;
• tie a single knot (cross the ends of the ribbon, wrap the upper end of the ribbon with the lower end);
• make loops at both ends of the nylon strip, leave both free parts of the tape long, tie;
• form one more loop from the remaining long ends, tie.

From paper tape

To make a bow "Star" from paper tape, you must do the following:

• cut the tape like this: The 1st 3 will be the longest, the 2nd 3 stripes will be a little shorter, the 3rd will be just as short as the 2nd stripes;
• each strip is folded into a figure eight, the ends are fixed;
• the first three largest elements are stacked in a circle, making up the lower tier;
• a tier of medium-sized elements is laid on it in exactly the same way, the petals should be staggered, in the center the tiers are fastened together;
• small petals are attached last in a similar arrangement.

wrap a small piece of tape in a ring and attach in the center of the craft.

How to make a bow from a ribbon for an extract

In order for the ribbon bow to look elegant, it is better to use ribbons of several matching colors and decorative elements. Such a bow will be multi-tiered.

Manufacturing instruction:

• work begins from the lower tier, the tape is cut into pieces 20 cm long, the ends of each piece are singeed and sewn together;
• the petals are laid out in a circle and connected to each other;
• for the petals of the next tier, cut off strips 15 cm long, also make petals out of them and fasten in a circle;
• place the upper circle of petals on the lower one, sew at the center point;
• decorate the middle of the flower-bow with beads and rhinestones.

The plot of creating a bow for a newborn boy:

You can make a bow of 3-4 tiers. It is important to remember: the higher the petals, the smaller they are.

Bicolor

To make a two-color bow, you will need 2 multi-colored ribbons of different widths. A wider ribbon will form the basis and background, it should be solid. A narrow ribbon can be taken bright with an ornament.

Work process:

• cut 2 pieces of the same length of a wide and narrow tape;
• place a narrow tape on a wide one along the center line, fasten the ends;
• roll into a ring;
• glue the joint;
• smooth out;
• pull the bow in the middle with a narrow ribbon, hiding the joint under it, tie;
• adjust the ends.

Openwork "Dior"

The Dior bow is somewhat different from other ribbon crafts with loops and knots. It is a semicircular half of the bow, lying in the same plane. For its manufacture, you can choose any ribbon, including lace.

Procedure:

• rings are made from ribbons of different lengths;
• rings are superimposed on one another from largest to smallest;
• in the middle they are fixed with a stapler, so each ring takes the form of a figure eight;
• superimposed on top small ring, fixed;
• hide the fixation point under the tape that passes through the small ring.

With a fork

To make a bow on a fork with your own hands, you will need a ribbon with a length of 15 cm and a table fork with 4 prongs.

Procedure:

• wrap the tines of the fork with a ribbon, cross on the inside;
• determine the length of the ends of the tape, one of them should be much longer than the other;
• long end stretch through the middle gap between the teeth;
• the same end is brought up between the 2nd and 3rd teeth;
• the resulting small loop does not need to be tightened yet;
• the tape is threaded into the loop inside;
• pull the end of the workpiece out of the loop, tighten the knot;
• remove the finished bow from the cutlery;
• adjust the ends.

Kanzashi technique

How to make a ribbon bow using the kanzashi technique:

• first you need to cut the ribbon into small rectangles, the more rectangles (for example, 15), the more voluminous the bow, a petal will be made from each rectangle;
• put the tape on the table face down;
• bend the upper corner to the bottom line and fix with a safety pin;
• flip the rectangle
• on the front side, bend an acute angle to the bottom;
• hide the end
• fix with a pin;
• do the same on the opposite side;
• fold the workpiece so that the bent corners are inside;
• sew the bottom edge, tighten the thread;
• turn over, straighten;
• perform all the petals in a similar way;
• for the lower tier, put on a thread and close 7 petals in a circle, for the middle - 5, for the top - 3;
• glue the base to the middle of the lower tier from the wrong side;
• on the front side, glue the middle one to the lower tier, then the upper one.

decorate the middle with a large bead.

From rep ribbons

How to tie a bow from a rep ribbon:

1. Fold the ribbon into a figure eight, secure the ends with pins.
2. Bend the middle of each loop to the middle of the bow, fix it, you get 4 small loops.
3. Both bows are stitched in the center, the thread is tightened, the place of the stitch is wrapped with a thread, the thread is fixed.

From ribbons of different materials, you can create a wide variety of bows to decorate clothes, gifts and interior items with them. The technique of tying bows is extremely simple, anyone can handle it.

Article formatting: E. Chaikina

A useful video clip on how to make a beautiful bow yourself

How to make an elegant two-tone bow can be found in this video:

Almost every day in our life is a holiday. You won’t have time to spend the New Year, and then Valentine’s Day is on the way, and after it is March 8, and even friends celebrate their name days. All these dates have something in common - gifts. Select perfect present- this is only half the battle, but its packaging is a whole art. At the same time, it is important not only to find the right paper and ribbon, but also to wrap the box beautifully with them. Let's figure it out

Preparatory work

We use bows not only during the holidays, but also in everyday life. They can decorate the house (for example, cling to curtains), decorate hairpins, clothes, use in needlework. There are a lot of options for their use, as well as ways to do it. First you need to choose the most suitable material for your craft.

Choosing a tape

First of all, you must clearly define what you are going to make a bow for and what color it should be. If you are wrapping a gift, the width of the ribbon must be chosen depending on the size of the box: wide ones are better for large presents, and narrow ones for small ones. Although, if you decide to go against the rules and tie a huge wide bow on a small package, it can look very good.

Remember the golden rules

If you are planning to make a beautiful ribbon bow for a dress, pay attention to
its texture. It should go well with the fabric from which the clothes are sewn.

To determine the length of the ribbon for a gift box, you can use the following method: wrap the gift twice and add about 60 cm to the resulting length for the bow itself.

Most often, satin fabric is used to tie a beautiful ribbon bow. But if you do not have experience in this matter, this material may seem too slippery and inconvenient for you to create. In this case, it is better to objectively assess your abilities and give preference to a rougher material.

A very convenient option for bows for gifts and bouquets is a ribbon, along the edges of which a thin wire is attached. It allows you to give the product any shape and keep it for a long time.

Always remember the most important rule when choosing ribbon: if you can tie it into a tight knot that won't fall apart, then it's perfect for your creation.

Gathering other materials

To make a bow, you will also need:

• glue (test it in advance for the ability to fix the fabric);
• sharp scissors that will clearly cut the tape and not chew on its edges;
• floristic wire (this material is not always necessary, but in the manufacture of some models you can’t do without it);
• additional decor elements - beads, flowers, stars and any other trinkets that you want to decorate your product with.

So, we picked up the materials to make a ribbon bow. A master class on its creation can be mastered by everyone, regardless of their experience in needlework.

Classics of the genre

To begin with, let's try to make the most ordinary bow, without extra layers and details. But do not think that if it is simple in execution, it will look less advantageous than its magnificent counterparts.

So, how to tie a beautiful ribbon bow? You must do the following:

1. Measure the required length and cut the desired piece. It is better to take the material with a margin so that it is sure to be enough, and the tails of the bow were long and graceful, and not microscopic and sticking out in different directions.
2. Remove everything superfluous from the table and lay out the tape on it (you can do this on the floor or bed - this does not matter, the main thing is that you have a flat surface in front of you, not cluttered with foreign objects).
3. Unfold it and lay it out in front of you. If there is such a need - iron it with an iron.
4. Cross the ends of the ribbon in the center to properly tie the satin ribbon bow. If you did it right, you should end up with two even droplets of the same size. This will be the ears.
5. Before taking the next step, carefully check the dimensions of the parts so that one half does not turn out to be larger than the other. Do the same measurements with the ponytails - they should also be perfectly the same (unless, of course, you conceived the concept of a bow with ends of different lengths).
6. Now we cross the droplets, while laying them on top of each other.
7. Wrap the left eye around the right and pass through the loop that appeared in the central part.

Tighten the resulting knot tightly so that it does not come loose at the most inopportune moment. Correct each part of it - and that's it, our decoration is ready!

Fork help!

If you want to make a beautiful little bow out of thin tape, it is very convenient to use auxiliary items when creating it. Since it is quite difficult to tie it by hand, the most ordinary fork will come in handy for this purpose.

This cutlery, which is in any home, will help you make even the smallest beautiful ribbon bow. You can independently adjust the size of the future product by increasing the width of the teeth with cardboard. To make a beautiful bow with a fork, you must follow these steps:

1. Unfold the tape and wrap it around the appliance.
2. Make a twist with one end and pull it under the ribbon between the middle tines of the fork.
3. Pick up this end on the opposite side. This way you wind the entire plug.
4. Pass the same part of the tape in the upper zone, stretch it to the front of the cutlery.
5. On the one hand, you have a loop that so far does not need to be touched.
6. Continue working with the same tip. Wrap it to the right and stick it through lower part inside the loop.

Now tighten the resulting composition, carefully remove it from the fork - and that's it, the miniature bow is ready.

Wire won't hurt either.

Another useful assistant when creating bows is floral wire. With its help, you can make both classic single-tiered and lush crafts.

For gifts, bouquets, hair ornaments, clothes and interior decor - you can use this ribbon bow anywhere. The master class on its creation is extremely simple:

1. Cut the tape to the length you need.
2. Lay it out on a flat surface and smooth it out.
3. Bend the material on both sides and cross the tips in the central part. Lay them on top of each other. This way you will form the ears of the future bow. Do not forget that their ends should hang freely in the form of ponytails.
4. Hold the resulting composition in the central part so that all its elements remain in place.
5. In the middle, wrap the workpiece tightly with wire.
6. Cover the connection with a piece of tape of the same color or goes well with the main one. Fix with glue or sew with thread.
7. Tidy up the ears and tails, adjusting them and spreading them symmetrically.

So we make a beautiful ribbon bow. Feel free to use it for any decorative purpose.

Two in one

If you want to make a simple bow, but not with two ears, but with four, folded in two layers, you do not need to cut out each of its elements separately. To create this craft, as in the case of a regular bow, you also need one complete ribbon.

This jewelry is perfect for decorating gifts, as well as for decorating hairstyles and any other type of decor. So, let's get down to business.

1. Cut off a large piece of tape and lay it out in front of you.
2. Bend the first loop, then the second. Do not let the central part out of your hands so that the composition does not fall apart. If you find it difficult to hold the tape and work with it at the same time, ask someone to help you until you learn how to do it yourself. When you get the hang of working with the tape, you can make multi-level decorations in this way, but for now it is better to limit yourself to a two-layer craft.
3. Cut off the excess parts of the tape, and drag the rest in the center with a wire or sew with a thread.
4. Wrap the center part with a matching tape so that the fixing point is not visible. Secure it with glue or sew it on too.

You've made a beautiful two-layer bow. Now you can hook it wherever your heart desires!

Making a curvaceous bow

To make a beautiful bow from a wide ribbon, it is best to use material along the edges of which a wire is stretched. In this case, it will be much more convenient for you to give the decoration a shape and volume. This craft is perfect for gift boxes.

For a medium-sized presentation, you will need the following materials:

• about 2 meters of tape;
• glue gun;
• double sided tape.

So, your actions in order to make a beautiful ribbon bow:

1. Wrap the box in gift paper;
2. Cut off the desired amount of ribbon and wrap it around the present.
3. Fix the future bow on the box with glue. In this case, you can not cut the ends of the tape, as you will need them for further creativity.
4. Bend one end of the material to make a loop. Glue the resulting drop to the box in the central part.
5. Fold the loop several times to create folds from it. Each of them is a separate ear of the future bow.
6. Fasten the loops together and glue them to the package.
7. Similarly, you can make even more of these drops and fix them on the box.
8. Follow the same steps to create the second half of the bow.
9. Use scissors to trim the hanging ponytails.

To hide the place of fixation of all elements in the center of the craft, cover it with a separate piece of fabric.

Finishing the ends of the tape

When creating any bow, it is very important role plays every element. Not only the ears of the craft, but also its ponytails should look neat and symmetrical.

When we tie a bow from a satin ribbon (or any other), we need to ensure that its hanging ends are as long as possible. You can shorten them at any time, but to increase them without untying the loops is extremely difficult and virtually impossible.

To make the bow look neat, you need to cut the ends of the ribbon correctly. Thanks to this, the material will not crumble, you will remove excess threads sticking out of the edges, and the whole appearance of the product will become much more presentable.

For best results, use sharp scissors that won't chew through the fabric. To trim the tips, you can choose one of the two most common methods:

1. Diagonally: Run the scissors over the tape at any angle you like.
2. V-shape: find a point in the center of the ribbon near its end, mark it with a pencil or pen, cut two lines coming from the corners of the tail towards it. If the triangle you cut didn't come off the fabric on its own, carefully peel it off where it's still attached.

Choosing additional decorations

Finishing the ends can be the last step on how to tie a beautiful ribbon bow, unless you want to decorate it with extra trinkets. Depending on the occasion, your tastes and the content of the gift, these can be a variety of elements.

For example, a bow for New Year's present can be decorated with a small decorative snowflake, bell, Santa Claus. Rhinestones, beads, flowers, stars, hearts, etc. are suitable for crafts for a hairpin or clothes.

We decorate wisely!

In any needlework store you can find a lot of suitable parts. They can be attached not only to the ribbon itself, but also to the wrapper next to it, if we are talking about presentations.

When choosing additional elements for a bow, it is very important not to overdo it. It's better to just tie a beautiful ribbon bow and decorate it with one cute trinket than to wrap it around with a bunch of all sorts of decorations that together will look cheap and tasteless. Create with wisdom and inspiration. And you will definitely succeed!