When you want to make a small present as a sign of attention or gratitude, and the standard sets and packaging are already boring, you can give all the same candies, but in the original design: in the form of a bouquet, a car, and even a carriage. Such a sign of attention will be appreciated by everyone, and it will be appropriate for any celebration. And how to make, for example, the same carriage from sweets with your own hands, we will tell you in this article.

In order to create such a masterpiece, you do not need special knowledge and skills, although at first glance it may seem like a very difficult job. And from the financial point of view, such a present is very affordable, because only a little is needed to create it. delicious sweets and fantasy, and materials can be found in any home. But, as they say, fewer words and more action, we bring to your attention several detailed master classes.

Let's start simple

Materials for the carriage:

• plastic cup - 4 pcs.;
• toothpicks;
• cocktail tubes;
• foil;
• Moment glue or glue gun;
• scissors;
• Scotch.

Since the box of Rafaello chocolates will replace the cockpit, we only need to make the wheels. For this from plastic cups cut off four rings, they will serve us for the base of the wheel.

Using toothpicks, fix the spokes on the wheels.

On a note! If you want to add some color, you can paint the toothpicks or wrap them with satin ribbon.

We glue the foil onto the cardboard and cut out eight circles, about the size of a penny, glue them on our wheels in the center.

Now we need to make the bottom, on which, in fact, our booth with sweets will be located. To do this, take the straws for drinks and glue them to the center of the wheels.

Try to fix the straws well, because they will hold the entire weight of the candy. When the glue dries up, glue the bottom of the desired size, pre-cut from cardboard, to the tubes.

In principle, our carriage is ready on this, it remains only to place a box of chocolates on it, if you wish, you can decorate it with ribbons, flowers, both live and artificial, beads and whatever your heart desires.

Out of the candy box

If you need to make a present from assorted sweets, then ready-made boxes with sweets will not work, it is better to make the box yourself from the template. You can also more thoroughly approach the manufacture of the frame of the carriage itself.

We need:

• cardboard;
• two-core wire;
• nippers;
• wooden skewers;
• glue gun or Moment glue;
• corrugated paper;
• Scotch.

We need to bite off 4 pieces of a two-wire wire: 2 pieces. - 28 cm each, 2 pcs. - 40 cm each (the length of the wire depends on the desired wheel size, if the gift is small, it can be reduced).

We make the shape of the wheels.

Color corrugated paper glue over our future wheels.

Now we make knitting needles. To do this, cut the wooden skewers into 4 cm pieces and glue them to a circle cut out of cardboard.

We glue it with corrugated paper in the same way.

We connect 3 wooden skewers together and glue with corrugated paper in the same way.

We make a frame from a two-wire wire, which will hold our box of chocolates.

Make a carriage out of cardboard, Cinderella out of thread or paper with the children, giving them your attention and immersing them in Magic world creation.

How to make a carriage?

Make one so that it has a touch of antiquity. To do this, take:

• printing and ordinary cardboard;
• flat and rounded wooden sticks;
• glue "Moment Crystal";
• acrylic lacquer;
• pins;
• golden brown acrylic paint;
• beads with hats;
• transparent plastic;
• scissors;
• a candle;

If you do not have polygraphic cardboard, use regular, but take a dense one. From it you need to cut one sidewall for each side, which will be solid, the second consists of three parts - two windows and a door. Cut out two pieces for the bottom.

Place these two sheets of cardboard next to each other, glue them on top and bottom along a small rectangle made of the same material.

Paint the outside details. If you want the carriage to have an aged look, then use gold and brown acrylic paint. After it is completely dry, glue the elements of the crew. On each window, glue a piece of transparent rectangular plastic, which is 5 mm larger than these gaps. Attach them between the outside and inside of the cardboard sides.

Connect the sides of the carriage by gluing the rectangular cardboard blanks that you cut out before. When the glue is dry, paint the sides with gold acrylic paint.

While it dries, see how to make the carriage further. We will make wheels for her. Each consists of two identical round pieces, cut them out of cardboard using a pair of compasses or suitable round objects. To make the wheel axles, cut out small circles and stick 8 wooden sticks evenly on them. At the edges, put 1 and 2 sides of your wheel blanks on them, glue those. To keep these parts even, use glue to attach pieces of rope between adjacent axes.

From wooden sticks bigger size and diameter, which also need to be pre-painted in Brown color, assemble the base for the wheel system. Sharpen two parallel ends. To better secure these elements, make a hole with a small drill in the places where they join. Lubricate the wood spike with glue, paste here.

Put the wheels in place, from the outside secure the axles with glue beads.

Paint the assembled structure while the mortar dries, paint on the carriage as well.

To age the carriage, before covering with the last coat of paint, walk over some places with a candle, then apply brown acrylic paint.

After 2 hours, after the paint has dried, take a sponge or fine sandpaper, rub the carriage where you smeared it with a candle. You will get an aging effect. But you need to rub only to the previous gold layer, be careful not to inadvertently remove it.

After you have admired how wonderful the carriage turns out, you can and should arrange it inside. Make a bench out of strips of cardboard, folding them, as in the photo, glue the drapery in red.

In the center, attach a small rectangle of fabric that will become a rug. To make rollers on a sofa, cut out rectangles of the same size from soft red fabric and cardboard, stick one on top of the other. Roll this blank into a tube, glue it on the side. Determine the size of the resulting holes, cut a circle out of cardboard along it, cover it with a cloth, glue such round parts on both sides of the roller.

This carriage does not open, so you need to make the roof removable so that the child can put a toy princess, a prince or his other little dolls here. Make the cover 2 cm wider on all sides than the hole in the carriage ceiling. Cut out the decorations in the form of monograms, glue them to the lid, and paint the whole thing with acrylic paint.

The photo clearly demonstrates what the carriage will turn out. If you wish, you can make a bench for the coachman, covering it with the same red fabric as the sofa for the passengers.

DIY candy crafts for beginners

To do this, you need the following candies:

• 80 pcs. - "Golden Reseda";
• 66 Item (s) - "Golden Lily";
• 4 things. - "Autumn Waltz";
• 18 pieces - "Vanilla Masik";
• 3 pieces - "Roshen".

You will also need:

• thick cardboard for office equipment;
• wooden skewers;
• scissors;
• corrugated paper;
• gold paint;
• golden glue.

To make the base of the carriage, cut a circle out of cardboard, divide it into 6 triangles, bend the sidewalls, if necessary, cut them off a little, and then glue. Make the same shape, only of a larger size, from corrugated paper.

Runners 37 cm long, so that they are more durable, cut out 2 parts that need to be glued in pairs.

Cut 6 strips of cardboard 3 cm wide, on one side, glue them to the base of the carriage (to the edges of the triangles), on the other, connect them at the top, covering everything with a circle of cardboard. To make these elements stronger, you can make each part of two identical ones by gluing them in pairs.

Also make wheels and axles from double thick cardboard. Glue three wooden skewers together, cut off the excess so that the length of such parts is 13 cm. Make holes in the middle of the wheels, attach the pre-painted skewers here with golden glue. Glue candies on the wheels.

Connect the side parts of the carriage together with wooden skewers.

Cover the carriage itself with sweets.

Fasten it between the runners and you can send Cinderella to the ball.

But for this you need to make it yourself.

How to make Cinderella?

We will create a heroine in a very interesting technique... This is a shape-shifting doll. When necessary, she will be Cinderella, and at other times - a princess. To do this, her skirt must be straightened in one direction or the other. At this time, a second doll will be hiding under it.

This is what Cinderella and the princess will be like.

You will need the following materials and equipment:

• acrylic yarn in various colors;
• holofiber filler;
• circular knitting needles 4 and 3 mm;
• pins;
• row counter, if available.

Cast on 40 stitches using red yarn.

To make it easier to sew the workpiece later, leave a long tail of yarn when making loops, fold it several times, tie it in the center so that it does not get in the way.

1. We knit from the waist to the top. After a set of stitches in hosiery, make 12 rows, recall, performing this pattern, in all front rows do the front, and in the purl - purl loops.
2. Now attach the white thread, knit according to the scheme: 6 l.; 2 persons together - execute this fragment 5 times; 8 l.; 2 persons together - do this fragment 5 times, 6 p. This, after knitting this row, 13 loops should remain on the needles. Next, knit 5 rows in stocking.
3. The next piece is made up of flesh-colored yarn, so join this thread. We perform the 19th row with it, white front, 20th purl.
4. To take Cinderella further, move from the shoulders to her head. For this, 21 rows are made according to the scheme: 1 sheet, 2 loops from one front. As a result of this set, by the end of the row, you should have 45 loops on the spoke.
5. Perform the next 23 rows using a stocking knit.
6. After that, proceed to the crown. Knit 45 row according to the scheme: 1 l., 2 loops together l. As a result of this decrease, 30 loops should remain at the end of the row. Next, row 46, create with one purl.
7. 47th - knit every two loops knit together, as a result, at the end of the row you will have only 15 loops.
8. We thread here a thread of the same flesh color using a needle with a thick eye. To do this, we use a cut, but not completely, thread of this knitting. Tighten it, secure by tying the ends. Here's what happens at this stage.

This is the preparation of the head, shoulders, waist of Cinderella before the transformation. Now let's create the image of a girl when she has already become a princess.

Knit using the same technology, only first cast on 45 loops using blue threads, then knit with body yarn.

To make the Princess Cinderella doll volume, sew the halves of the girls along the edge loops, placing this seam at the back. Turn the blanks from the wrong side to the front side, fill with filler. In this case, the head will turn out to be about 21 cm in diameter. Connect the girls at the waist, sew them in this place. Add filler here to create a circumference of about 20 cm at the waist.

Separate the head from the neck, stitching here with a flesh-colored thread, and tighten it.

Using pins, mark the location of the eyes, one from the other will be at a distance of 4 loops, from the top of 11 rows. Sew them with black thread, mark the location of the mouth with a pin. In Cinderella, he can be a little sad, in the princess, smiling. Sew it with red thread.

1. In order for Cinderella to find a dress, you need to knit a skirt for her, under which the princess will hide for a while. We begin to make this piece of clothing from the bottom. To do this, cast on 129 loops with white yarn, knit 7 rows with hosiery.
2. In the 8th row, knit either 1 liter, then the combination "yarn over 2 liters. together". Ninth - knit all loops, purl ten.
3. Next, we use blue yarn, knit rows 11 and 13, and purl rows 12 and 14.
4. Take the red thread, knit 4 rows from 15 to 18 with it.
5. Make the next two rows with a dark yellow thread: knit 19, purl 20. Attaching a light yellow thread, knit 21 and purl 22. So, changing the color of the yarn every 2 rows, follow the same pattern to make the fabric up to 64 rows.
6. In the 65th, we begin to subtract for the waist, for this knit one l., Then 2 together l. At the end of the row, you have 86 stitches left.
7. In the 66th, do all of them with the purl, in the 67th, reduce them further, knitting 2 loops together with the front ones. At the end of this row, you should have 43 stitches left.

Sew the fabric along the edge loops, tuck the skirt at the bottom so that beautiful teeth form in this place. Turn it out there. Also with yarn different color make patches for the skirt, sew them to it.

The belt consists of 44 loops, is made with black threads in the front satin stitch. Sew the belt to the skirt. Here's how to make Cinderella.

We need to create a princess too. Knit using the same technique, but using different colors. 129 loops are recruited with white yarn, then you will knit with a blue thread from the 11th row, from 15 white, from 19 blue, from 29th white.

To make flowers for the princess, let's start with the first one. Cast on 14 stitches with pink thread. Perform the first row with the front ones, in the next you need to knit 2 purl loops each. Pass a thread through the remaining loops, pull it off, and tie it. Sew hem loops, sew flowers to the skirt, and sew it to the princess figurine.

For a belt with pink yarn, cast on 44 loops, knit only with knit stitches. Close the loops, sew the belt to the skirt.

1. Our doll princess Cinderella should get her hands. To do this, cast on 14 loops with pink thread, using hosiery, knit 14 rows.
2. We begin to decrease the 15th, knitting 2 front together, so that by the end of this row you have 7 loops. We collect them on a thread, tighten them tightly, tie its ends.
3. We make sleeves for Cinderella from white yarn, and for a princess from blue. To do this, cast on 12 loops with threads of the appropriate color, the first row is sewn with the purl, in the second, add 12 loops evenly to make 24 of them.
4. Tie the third with purl. For row 25, perform all rows in stocking knitting. In the 26th, change the thread to red. Follow this row according to the scheme: 1 l., 2 together l., Here you should have 16 loops at the end of the row.
5. We perform rows 27 and 28 with the front ones, then we close all of them.
6. Sew the sleeves and arms along the edge loops, turn the work over to your face, sew the inlaid edge. Fill these blanks with holofiber. Insert your arms into the sleeves so that the width of the junction is 4 loops.

When aligning the arms and sleeves, make sure that their seams are one after the other, on the same side.

Sew these blanks. Sew your arms to the armhole. Let's take care of the girls' hairstyles.

1. Cinderella has a hat in the shape of hair and two pigtails. Cast on 56 stitches using brown thread. The first row is knitted, alternating, 1 liter. from 1 out. Next, make 17 rows using a scarf pattern.
2. At the top of the head, you need to subtract, for this knit according to the scheme: 2 l., 2 l together. Create the next 7 rows shawl pattern... In the 27th, we decrease again, knitting according to the scheme: 1 l., 2 together l., So that at the end of this row you have 28 loops.
3. The next five rows are made with a scarf pattern. In 33rd, knit all loops according to the scheme: 2 together l.
4. Collect the loops on the thread, tie its ends. For braids, measure out threads of the same length so that each has three bundles. Weave braids from them, sew on one side to the hair, on the other, tie a blue thread.

To make the princess's hairstyle, cast on 12 loops with white yarn, knit 10 liters in the first row, turn the work, do the second row 8 liters, turn again, make the third and fourth rows knit. Repeat this combination of four rows 12 times, then close all the loops, sew the edge. Fill the blank with holofiber, pin it on the top of the head with pins.

At the back of the head, the hairstyle must be separated with a twisted cord. To do this, take green yarn, measure out two pieces of 120 cm each.Tie their ends, attach to doorknob, twist clockwise. Fold them in half again in the middle, sew to the princess's white hairstyle, forming a bow at the back.

Make four identical curls, let's see how they are created, using one as an example. Cast on 7 stitches with white thread, sew 11 rows in garter stitch. Gather on a thread, pull tight, twist into a tight roll. Follow the rest of the three curls like this. Sew on 2 pieces on both sides of the main hairstyle.

Make flowers to decorate your hair in the same way as for a skirt.

If you need to quickly make a Cinderella doll to send it to beautiful dress and the carriage to the ball, then check out the next idea.

How to make a Cinderella doll out of paper?

If you have a color copier, then print out our heroine and new clothes for her. If this is not the case, in this case you can print it in black and white, and then the child will color it with pleasure. If you do not have these devices at hand, it does not matter, attach a sheet of paper to the monitor, sketch. It is better to cut the doll itself out of cardboard so that it is durable. And make costumes out of paper. Moreover, the child will be able, both to paint them with pencils or paints, and to make them out of colored paper.

The soft blue dress looks great. As you can see, the girl's outfit consists not only of him, but also of high gloves, ornaments on her head.

All details of the outfit are attached using rectangular paper elements, which are also in the picture, do not forget to cut them out.

In another dress, Cinderella will shine, both in the carriage and at the ball.

Redraw it onto a white sheet of paper, cut it out. Then the child will stick on the details of red, yellow, orange, pink, you get a beautiful apparel. A flower and a fan complement the chic look.

If Cinderella goes to a ball in winter when she needs warm vestments, the next model will do the job just fine. It consists of:

• blue dresses trimmed with strips of white fur;
• capes;
• warm gloves;
• fur jewelry on the head.

Soon, the prince will propose to Cinderella, so you can't do without wedding dress... The next set consists of him, a veil, long gloves, and of course, a bridal bouquet.

This collection consists of:

• flirty pink dress;
• a hat of the same color;
• basket with flowers.

In such an outfit, our Cinderella will also be incomparable.

Now you know how to make a carriage out of candy or cardboard, make a Cinderella out of paper or knit from threads. But one of the main details of the image is missing - the shoes.

Watch an interesting story, from which you will learn how to make this item so that it is not only beautiful, but also edible.

And if you want to get acquainted with the process of making a pumpkin carriage, then watch the second video.

Surely everyone has a familiar sweet tooth and would like to please them not with banal boxes of sweets, but to do something interesting with their own hands so that it remains as a keepsake. Or the question arises, what to give the child? Crafts from sweets look very interesting, and in this master class we will tell you how to make a carriage with your own hands.

Princess candy carriage

Materials:

Sackcloth,

Two-core wire,

Corrugated paper,

Super glue and PVA,

Duct tape,

Toothpicks,

Hot glue,

Round wrapped candies.

Work description

We take a two-wire wire, give the shape of the wheel, making the front wheels larger than the rear ones. We fix the ends with super-glue, on top for better fastening we wrap the points of union with adhesive tape. We tap with strips of corrugated paper, for this we cut it lengthwise, making the effect of relief and roughness.

Now we take burlap and cut petals from it, smear them with PVA, to give the shape of a flower, we put the petals in a bowl, bend the edges and put oppression right in the center on top (you can take the bottle and put the bottom on the flower). The petals must be made in such a size that, when finished, the flower enters the carriage into the seat, but in the middle. We are waiting for it to dry and cut off the protruding threads.

Next, we make spokes for the wheels from toothpicks, having previously taped them with corrugation. We poke holes between the two wires of the wire and fix the knitting needles using super-glue. Now we connect the wheels with skewers, having previously wrapped the skewers with corrugated paper.

Cut out two circles from cardboard. To make the carriage frame, we take a piece of wire 35 cm long (6 pieces are required), wrap it in a corrugation and direct it between two cardboard circles glued to each other. We take corrugated paper and cut the petals out of it to fit the size of the burlap petals. Now we glue the petals to the mug, alternating burlap petals and corrugations. From above, we also glue the ends of the wire to two circles of cardboard, bending them into oval shape shaping the carriage.

Now we take a piece of wire and make curls on both sides, in the center a straight wire the size of the carriage itself and fix it on top of the wheels from the side parts of the carriage, as if fixing the wheels with the help of these curls (we make 2 such parts). In front of the carriage, we make a seat for the coachman from five skewers and fix it on the curls with twine.

Now we make a part for attaching the carriage itself:

Take a large piece of wire and bend it into a rectangle. On one part we bend it upward by making a ladder, on the other part we bend the wire into two ladders and make curls at the ends, as a result we get a structure that enters between the wheels and is fixed on both sides of the wheel parts.

Now we collect the whole frame. We put the oval frame of the carriage into a flower made of burlap and corrugated paper and fix it with glue. Now we take the corrugation and make a skirt at the bottom of the frame with a flower and wrap it with twine between them and tie a bow on the side.

How to decorate a candy carriage

To decorate the carriage, we wrap all the wire parts with twine at the same distance between the windings.

Now we fix the oval detail with a flower on a rectangular structure with wheels and start making flowers with sweets.

We take the wire and, with the help of scotch tape, fix the candy to it by the wrapper. Cut out rose petals from corrugated paper about 10 pcs. We fix the first petal to the base of the candy and wrap it with thread, attach the other petal opposite and then fix the rest of the petals in a circle. We make 5 of these roses with sweets and two buds. Buds are made similarly to a rose, but with fewer petals, you do not need to straighten the petals. Next, cut out different petals from green corrugated paper and fix them on a wire, which we pre-wrap with green corrugated paper.

Then we decorate the carriage with roses. We fix six roses, buds and petals on top of the carriage on an oval structure, and put one rose in the carriage itself.

As you can see, making such crafts is simple; on the basis of this carriage, you can also make a wedding carriage. But only it is made from more delicate shades. For example, a carriage can be made white with gold wheels, roses can be made white and tinted with pink paints or pastels. A transparent veil is fixed on top of the carriage frame for a quarter of the frame. And on the frame you can still glue small candies in shiny red candy wrappers. And, of course, put dolls in the shape of a bride and groom with a coachman in front and three horses in the carriage.

Such carriages can be decorated with small candies that fit into the carriage, or you can make threads by attaching small candies to them. The threads are fixed on top of the carriage and hang down in the form of curtains.

Related videos

With your own hands. But it turns out that candy and other materials can be made amazing compositions, which will become wonderful sweet gifts for your loved ones and will delight the eye.

Candy compositions will do for any festive occasion and will please everyone: women, children, and men. We offer you several master classes on making the most popular do-it-yourself candy compositions. Knowing the basics can help you get a little creative and come up with your own compositions.

DIY candy basket

Candy basket- one of the simplest candy compositions that is easy to make using a paper base. To get a neat basket, they usually use sweets in the form long sticks.

To work you will need:

- Candy

Light colored cardboard

Double sided tape

- Scissors

Let's get to work:

1) Have long chocolates fold your ponytails by gluing them to the sides with double-sided tape.

2) For the basket, you need a cardboard base, which you can make yourself, or use a ready-made one. Measure the height of the candy and measure out a rectangle on a piece of cardboard width corresponding to the height of the candy, and long, depending on the size of your future basket.

Fasten a sheet of paper in a shape cylinder and secure the edges with a stapler. On the 300 grams chocolates, a basket with a diameter of 7-8 centimeters.

3) Glue to the bottom of the cylinder round bottom... To do this, you can use a circle of loose paper by folding the edges and gluing them on the outside with glue. Then glue on loose paper circle of cardboard, which corresponds to the diameter of the bottom of the cylinder.

4) Stick strips of double-sided tape at the top and lower parts outside of the cylinder.

5) Then, one at a time, begin to fasten candy.

6) You should get something like this uncomplicated basket:

7) Decorate the basket as an addition bow tying up a row of sweets. The basket is ready. Now you can put other candies in it or make several corrugated paper flowers.

Laptop made of candy

This original gift candy can be used as a basis for many other compositions. A laptop can be easily made out of the candy box, which is decorated with sweets on the outside. The box should have an opening and closing lid that will serve as a "monitor" for the notebook-composition. If you do not have a suitable box, the basis of the product can be made from a piece of styrofoam.

To work you will need:

- Sweets (flat and rectangular)

Styrofoam (thickness - 2 cm)

Glitter paper

Printed page showing the Windows splash screen

Paper knife

Thick wire

- Scissors

Let's get to work:

1) Lay out the flat candies to get outline of the future laptop and draw around the outline with a pen.

2) Cut from the foam around the contour two identical rectangles, then wrap each one in glitter paper or foil. These will be the main parts of the laptop - the monitor and the keyboard.

3) Take the first blank and glue in the center of it printout with a computer screen saver.

4) Lay out flat long candy from all sides of the picture.

5) Lay out the candies and glue them to the second blank, which will be keyboard... For example, like this, you can use more tall rectangular candy to get the keys:

6) Glue the candy to the outside of the laptop.

7) Cover with candy sides of workpieces, then only from three sides. You will need the fourth side of each to secure it. To do this, use thick wire, sticking it into the end of the monitor.

8) bend wire at the desired angle and insert the other end into the keyboard blank. To connect it to a monitor.

9) You will have an open laptop.

Here are some more options laptop made of candy, which will be a great gift for your beloved sweet-tooth men:

DIY candy tree

Very popular gifts for any special occasion - candy trees... There are several ways to make them, but the principle is the same: a round base, a leg and a pot.

Option 1:

This variant of the candy tree is the simplest. It will take you to make crafts no more than an hour... A variety of trees can be made on the basis of this product. It all depends on your imagination.

To work you will need:

- Candy different shapes(about 50 pieces)

Old newspapers

Wooden stick for the trunk

Glass or vase

Decorations (ribbons, colored paper)

- Scissors

Let's get to work:

1) Make from newspapers small ball of the desired diameter and wrap it with threads so that it does not unfold. From the bottom, stick a wooden stick that will serve as the trunk of your tree.

2) Stick the bottom end of the stick into a glass or vase and somehow strengthen to prevent the barrel from tilting. For example, you can fill a vase with the same newspaper or use a piece of styrofoam. The base for your tree is ready.

3) Make sure the barrel stood tightly in a vase and did not fall when you decorate your tree with sweets and other details. Start by attaching the candy. They can be glued with a glue gun. Better to use flat bottom candy, then it will be easy for you to unfold them right on the tree and eat.

As a basis for trees, you can take other, more professional materials, for example, foam ball and plastic stick which can be found in specialized handicraft stores:

As a basis, you can use liquid gypsum, which, when hardened, will firmly hold the trunk.

Working with plaster will take a little longer, although such a tree will eventually turn out more stable and reliable.

Option 2:

Original trees can be made from candies "Chupa Chups" or others chocolates on sticks... Moreover, these will not be simple candy trees: each such mini-tree will represent one candy.

To work you will need:

- Candy on sticks

Mastic (edible plasticine)

Spreading for cakes of different colors

Thimbles

Decorations for pots

Gypsum or hardening plastic

- Water

Let's get to work:

1) Insert the candy on a stick into the thimble and secure it with plaster or any other material that will work (for example, clay or salt dough). Let the base harden.

2) Unfold the candy, wrap it mastic and form a ball the correct shape.

3) After wetting with water, dip the candy in a container with sprinkles and roll it over so that small particles adhered to the tree.

4) Decorate the thimble ribbons or wrap in foil... Your candy tree is ready.

Similarly, you can do a big tree from round chewing gums.

Candy tree (master classes):

DIY candy cake

Candy cake- an original gift for a birthday or other holiday, as well beautiful craft which is easy to do. The composition is decorated candy flowers that can be made from corrugated paper. You can read more about candy flowers.

To work you will need:

- Candy

Corrugated paper

Styrofoam

Ribbons for decoration

Cardboard box

- Scissors

Let's get to work:

1) Cut out cake blanks from thick foam sheets: one larger, the other smaller. The size of the cakes will depend on you. Paste the blanks corrugated paper leaving beautiful edges on top.

2) Also cover with colored paper cardboard box which you will place on the topmost level and in which you can put small gifts and toys.

3) Cover with the same paper upper part foam blanks and set all levels one on top of the other securing them well.

This is the basis for your future cake. Now you can decorate it with sweets. For example, you can place candy flowers and bouquets on top of it, or sweeten the sides by placing sweets on glue or double-sided tape.

Such a composition can be made from the same foam base by cutting it out in the shape of a triangle. It will turn out piece of candy cake.

One-deck candy cake from long and round candies and paper flowers:

This original cake is made from broken chocolate bars Kitkat and decorated with dragee on top M&M "s... Not bad idea for children's party or birthday... The chocolate bars were probably used without a backing, but held together with the help of a ribbon.

Candy grapes master class

Bunch of grapes made of sweets is an excellent and very original gift for those with a sweet tooth. It can be used as a separate gift, or to decorate any composition with it: a cake, a bouquet, and so on.

Option 1:

To work you will need:

- Round wrapped candies

Wire for bouquets

Details for decoration - leaves, ribbons, ladybugs etc.

- Scissors

Let's get to work:

1) Make blanks for the bunch. To do this, use scotch tape for each candy attach the wire.

2) Then collect several candies (5-6 pieces) together and secure with tape or tape. For example, you can use colored tape to match the color of the wrapper, then the fasteners will not be visible.

3) Do several small bunches which you will then attach to the thicker wire.

4) When the whole bunch is ready, decorate it with leaves, ribbons and other decorations.

With the help of such bunches, you can decorate gift bottle of wine: