A true friend to your child.

The size: height about 12cm

Materials: propylene threads white color; threads "Iris" black; hook number 2.5; a piece of pink satin ribbon; foam rubber.

Technique: Crochet.

Work description:

* This toy consists of a main body, 2 front legs, a muzzle, 2 ears and a tail.

* The main part of the poodle is knitted starting from the top of the head (Fig. 27.1). Knit a chain of 4 air loops and lock it into a ring with a connecting post. Knit in a circle with long loops of 5-6 rows, gradually increasing the number of loops to 27 (for example, knit 8 columns in the 1st row, 14 in the 2nd, 19 in the 3rd, 23 in the 4th, in 5th - 27 columns). Continue to knit in single crochet, without making additions, to a height of 3-4 cm - this is the poodle's neck.

* To move to the chest, knit 2 rows with single crochets with an increase in the number of loops to 32 and start knitting the breast with long loops. Knit it not in a circle, but in short rows in the forward and reverse direction: knit with long loops from point A to point A1, then turn knitting reverse side to yourself and knit the next row in the same way, extending it by 1 loop (that is, attach 1 loop of the last row of the breast). Continue knitting, lengthening each row by 1 loop, until the loops converge, i.e. you get a circular row, and knit 2 more rows in a circle with long loops. The breast is ready.

* For the body of the poodle, knit 7 rows in a circle with single crochets, without changing the number of loops. Stuff the connected part of the main part with foam, as this will be difficult to do later.

* Knit the back of the body in short rows according to the description of the breast, only not with long loops, but with single crochets: knit from point B to B1 and 4 more rows, capturing 1 loop more in each row. Then knit a row from point B to B1 and knit in rows in the forward and reverse direction, capturing 1 loop in each row, until the loops converge, i.e. you get a circular row.

* Mark point G in the middle of the back, count an equal number of loops on both sides of it (in our case, 16 loops are obtained), the counting results should converge at point G1. Connect points G and G1 with 9 air loops. The resulting holes are the basis for knitting the dog's hind legs.

* Hind leg: knit in a circle 6 rows, gradually reducing the number of loops to 13, then another 6 rows straight. After that, in front of the paw, knit half a row and finally 1 circular row. Fill the back of the body and leg with pieces of foam rubber, then close the remaining hole by knitting 2 rows with a decrease in the number of loops. Similarly, knit the second paw, taking as a basis 16 loops + 9 loops from the 1st leg, stuff with foam rubber and close.

* Front paw: tie a chain of 16 stitches and lock it into a ring with a connecting post. Work in the round with single crochet 4 cm, then 2 rows with long loops and another 4-5 rows with single crochet. After that, in front of the paw, knit half a row and, finally, 1 circular row. Close the remaining hole by knitting 2 rows with a decrease in the number of loops, and stuff with foam rubber. Tie the second paw in the same way. Sew the legs to the front of the body.

* Muzzle: knit a chain of 19 air loops and close it into a ring using a connecting column. Knit in a circle with single crochets for 7 rows, gradually reducing the number of loops until they come to naught. Stuff the muzzle with foam rubber and sew to the main part of the body.

* Tail: tie a chain of 10 air loops and lock it into a ring with a connecting column. Work in the round with single crochet 3 cm, then 1.5 cm long loops, gradually reducing the number of loops. Sew the tail to the back of the body.

* Ears (2 pieces): Knit a chain of 6 stitches and work 2 rows of long stitches. Sew the ears to the head at the base of the “hat” from long loops.

* The eyes and nose of the poodle are embroidered with black thread. Tie a ribbon around the neck in the form of a bow. Trim the tops of the long loops and fluff.

knitted poodle

toy height about 12cm

Would need:

propylene threads of white color;

threads "Iris" black;

hook number 2.5;

a piece of pink satin ribbon;

foam rubber.

This toy consists of a main body, 2 front legs, a muzzle, 2 ears and a tail.

* The main part of the poodle is knitted starting from the top of the head (Fig. 27.1). Knit a chain of 4 air loops and close it into a ring using a connecting post. Knit in a circle with long loops of 5-6 rows, gradually increasing the number of loops to 27 (for example, knit 8 columns in the 1st row, 14 in the 2nd, 19 in the 3rd, 23 in the 4th, in 5th - 27 columns). Continue to knit in single crochet, without making additions, to a height of 3-4 cm - this is the poodle's neck.

* To move to the chest, knit 2 rows with single crochets with an increase in the number of loops to 32 and start knitting the breast with long loops. Knit it not in a circle, but in short rows in the forward and reverse direction: knit with long loops from point A to point A1, then turn the knitting with the reverse side towards you and knit the next row in the same way, extending it by 1 loop (that is, attach 1 loop the last row of the breast). Continue knitting, lengthening each row by 1 loop, until the loops converge, i.e. you get a circular row, and knit 2 more rows in a circle with long loops. The breast is ready.

* For the body of the poodle, knit 7 rows in a circle with single crochets, without changing the number of loops. Stuff the connected part of the main part with foam, as this will be difficult to do later.

* Knit the back of the body in short rows according to the description of the breast, only not with long loops, but with single crochets: knit from point B to B1 and 4 more rows, capturing 1 loop more in each row. Then knit a row from point B to B1 and knit in rows in the forward and reverse direction, capturing 1 loop in each row, until the loops converge, i.e. you get a circular row.

* In the middle of the back, mark point G, count an equal number of loops on both sides of it (in our case, 16 loops are obtained), the counting results should converge at point G1 (Fig. 27.2). Connect points G and G1 with 9 air loops. The resulting holes are the basis for knitting the dog's hind legs.

* Hind leg: knit in a circle 6 rows, gradually reducing the number of loops to 13, then another 6 rows straight. After that, in front of the paw, knit half a row and finally 1 circular row. Fill the back of the body and leg with pieces of foam rubber, then close the remaining hole by knitting 2 rows with a decrease in the number of loops. Similarly, knit the second paw, taking as a basis 16 loops + 9 loops from the 1st leg, stuff with foam rubber and close.

* Front paw (fig. 27.3): tie a chain of 16 stitches and lock it into a ring with a connecting post. Work in the round with single crochet 4 cm, then 2 rows with long loops and another 4-5 rows with single crochet. After that, in front of the paw, knit half a row and, finally, 1 circular row. Close the remaining hole by knitting 2 rows with a decrease in the number of loops, and stuff with foam rubber. Tie the second paw in the same way. Sew the legs to the front of the body.

* Muzzle (fig. 27.4): tie a chain of 19 air loops and close it into a ring using a connecting post. Knit in a circle with single crochets for 7 rows, gradually reducing the number of loops until they come to naught. Stuff the muzzle with foam rubber and sew to the main part of the body.

* Tail (fig. 27.5): tie a chain of 10 air loops and lock it into a ring with a connecting post. Work in the round with single crochet 3 cm, then 1.5 cm long loops, gradually reducing the number of loops. Sew the tail to the back of the body.

* Ears (2 parts, fig. 27.6): tie a chain of 6 stitches and make 2 rows of long loops. Sew the ears to the head at the base of the “hat” from long loops.

* The eyes and nose of the poodle are embroidered with black thread. Tie a ribbon around the neck in the form of a bow. Trim the tops of the long loops and fluff.

Patterns for knitting a poodle:

knitted poodle

toy height about 12cm

Would need:

propylene threads of white color;

threads "Iris" black;

hook number 2.5;

a piece of pink satin ribbon;

foam rubber.

This toy consists of a main body, 2 front legs, a muzzle, 2 ears and a tail.

* The main part of the poodle is knitted starting from the top of the head (Fig. 27.1). Knit a chain of 4 air loops and close it into a ring using a connecting post. Knit in a circle with long loops of 5-6 rows, gradually increasing the number of loops to 27 (for example, knit 8 columns in the 1st row, 14 in the 2nd, 19 in the 3rd, 23 in the 4th, in 5th - 27 columns). Continue to knit in single crochet, without making additions, to a height of 3-4 cm - this is the poodle's neck.

* To move to the chest, knit 2 rows with single crochets with an increase in the number of loops to 32 and start knitting the breast with long loops. Knit it not in a circle, but in short rows in the forward and reverse direction: knit with long loops from point A to point A1, then turn the knitting with the reverse side towards you and knit the next row in the same way, extending it by 1 loop (that is, attach 1 loop the last row of the breast). Continue knitting, lengthening each row by 1 loop, until the loops converge, i.e. you get a circular row, and knit 2 more rows in a circle with long loops. The breast is ready.

* For the body of the poodle, knit 7 rows in a circle with single crochets, without changing the number of loops. Stuff the connected part of the main part with foam, as this will be difficult to do later.

* Knit the back of the body in short rows according to the description of the breast, only not with long loops, but with single crochets: knit from point B to B1 and 4 more rows, capturing 1 loop more in each row. Then knit a row from point B to B1 and knit in rows in the forward and reverse direction, capturing 1 loop in each row, until the loops converge, i.e. you get a circular row.

* In the middle of the back, mark point G, count an equal number of loops on both sides of it (in our case, 16 loops are obtained), the counting results should converge at point G1 (Fig. 27.2). Connect points G and G1 with 9 air loops. The resulting holes are the basis for knitting the dog's hind legs.

* Hind leg: knit in a circle 6 rows, gradually reducing the number of loops to 13, then another 6 rows straight. After that, in front of the paw, knit half a row and finally 1 circular row. Fill the back of the body and leg with pieces of foam rubber, then close the remaining hole by knitting 2 rows with a decrease in the number of loops. Similarly, knit the second paw, taking as a basis 16 loops + 9 loops from the 1st leg, stuff with foam rubber and close.

* Front paw (fig. 27.3): tie a chain of 16 stitches and lock it into a ring with a connecting post. Work in the round with single crochet 4 cm, then 2 rows with long loops and another 4-5 rows with single crochet. After that, in front of the paw, knit half a row and, finally, 1 circular row. Close the remaining hole by knitting 2 rows with a decrease in the number of loops, and stuff with foam rubber. Tie the second paw in the same way. Sew the legs to the front of the body.

* Muzzle (fig. 27.4): tie a chain of 19 air loops and close it into a ring using a connecting post. Knit in a circle with single crochets for 7 rows, gradually reducing the number of loops until they come to naught. Stuff the muzzle with foam rubber and sew to the main part of the body.

* Tail (fig. 27.5): tie a chain of 10 air loops and lock it into a ring with a connecting post. Work in the round with single crochet 3 cm, then 1.5 cm long loops, gradually reducing the number of loops. Sew the tail to the back of the body.

* Ears (2 parts, fig. 27.6): tie a chain of 6 stitches and make 2 rows of long loops. Sew the ears to the head at the base of the “hat” from long loops.

* The eyes and nose of the poodle are embroidered with black thread. Tie a ribbon around the neck in the form of a bow. Trim the tops of the long loops and fluff.

Patterns for knitting a poodle:

For a finished poodle, you will need 7 balls and one tube: head, muzzle, hat, lower body, upper body, paws and ears. For a poodle, you will need hook number 3 and threads (you can take any you like).

Seven, different sizes ball, crocheted and stuffed with padding polyester - this is the head, muzzle of the poodle, the lower body and paws. The muzzle is the most small ball, but the head is the largest. Bottom part torso - medium ball and four paws. Thus, five medium-sized balls are required.

Knitting begins with the ball itself big size. The rest of the balls fit in the same way. Nose, tongue are made of fabric. You can take thin felt.

The nose is done like this. A small circle is cut out of a black fabric and, with the help of a thread with a needle, is gathered along the edge onto a thread and tightened - it turns out a pimpochka. If the pimpochka is small, then you can put a small piece of cotton wool inside, so that the pimpochka straightens out and becomes more voluminous. The nose is ready.

Red is suitable for making tongue soft felt. You need to cut a semicircle with a diameter of 1 cm.

Knitting a poodle head

Subsequent knitting begins with these four loops.

1 row - 8 st.b / n. A ring of 4 loops is tied with 8 b / n columns, the hook is drawn to the center of the ring. This is done like this: 1 ch is knitted. for lifting and then 7 columns b / n. The hook and loop from the last column is carried out at the beginning of the row through the air loop. It turns out 2 loops. Which are knitted with a half-column b / n - the thread is intercepted and pulled through 3 loops on the hook. The result was the first closed row of a circle of 8 st.b / n.

2 row - 16 tbsp. b/n. In the first row, 2 st.b / n are knitted on each loop. First, one air loop is knitted for lifting and then 15 sc / n. The row ends with a half-column b / n.

3 row - 24 tbsp. b/n. starts with one air loop for lifting. Then, on the 2nd loop of the previous row, 2 st.b / n are knitted, on the third - one, on the fourth - two, etc. Thus, the columns alternate and 24 loops are knitted. It ends with a half-column b / n.

4-7 rows - 24 tbsp. b/n. The row begins with an air loop for lifting and then on each loop of the previous row, 1 sc / n. Close as before.

8 row - 16 st.b. / n. Reducing loops. Starts with an air loop. After that, the first loop of the previous row is skipped. On the next two loops, it is knitted according to st.b / n, then the loop is skipped again and again by 2 according to st.b / n. etc. it turns out 16 st.b / n.

9 row - 8 st.b. / n. One loop for lifting, then skip, then st.b / n, then skip and st.b / n. etc. to end. It turns out 8 st.b. / n. closes with a half-column b. / n.

The result is a connected bag. Which needs to be filled with synthetic winterizer and close 10 next.

10 row - 4 tbsp. b./n. One air loop for lifting, 1 loop is skipped, st.b / n. etc. to end. It ends with a half-column b. / n. The remaining loops (there are 4 of them) are tightened with a thread and fixed. The head is ready.

Knitting the legs and body of a poodle

It is necessary to tie 6 balls of medium size - 4 for the legs and 1 for the body.

Knitting begins with 4 air. loops that close into a ring. Then knit in the same way as the head.

1 row - 8 tbsp. b./n.;
2 row - 16 tbsp. b./n.;
3-6 rows - 16 st.b. / n.;
7 row - 8 tbsp. b./n.

At the end, the balls are stuffed with filler and tightened.

Knitting a muzzle of a poodle

Start as usual. Then:
1 row - 8 tbsp. b / n .;
2-5 rows - 8 st. b./n.;
6 row - 4 tbsp. b./n.

Knitting the upper body

The beginning is similar to the previous ones.

1 row - 8 st.b / n.
2 row - 16 st.b / n.
3-12 rows - 16 st.b / n.
13 row - long loops.
14 row - 16 st.b / n.
15 row - long loops.
16 row - 16 st.b / n.
17 row - long loops.
18 row - 16 st.b / n.
19 row - long loops.
20 row - 16 st.b / n.
21 row - long loops.
22 row - 16 st.b / n.

After 22 rows, the bag is stuffed. For stability, a wire frame is inserted.

23 row - 8 st.b / n.
24 row - 4 st.b / n.

Collect 4 received loops on a thread, pull them off and fasten. Top part body is ready.

Poodle hat

A chain of 4 air loops is knitted and connected into a ring.

1 row - 8 st.b / n.
2-5 rows - 8 st. st.b / n in each row.
6 row - long loops.
7 row - 8 st.b / n.
8 row - long loops.
9 row - 8 st.b / n.
10 row - long loops.
11 row - 8 st.b / n.
12 row - 4 st.b / n.

The loops are assembled and tightened. The poodle hat is ready.

Knitting ears for a poodle

The ears are knitted back and forth in rows. Knitting begins with 5 air loops. Then so.

1 row - 5 st.b / n;
2 row - long loops;
3rd row - 5 st.b / n;
4 row - long loops;
5 row - 5 st.b / n;
6 row - long loops;
7 row - 5 st.b / n;
8 row - long loops;
9 row - 5 st.b / n;
10 row - long loops;
11 row - 5 st.b / n;
12 row - long loops;
13 row - 5 st.b / n.

poodle assembly

The upper and lower parts of the body are sewn together. Paws are sewn to the body, a muzzle is sewn to the head. A tongue, nose, ears are sewn to the muzzle. The eyes are made from buttons. A hat is put on. Crocheted poodle is ready!

Hello to all! Today I want to offer you an unusual topic, or rather, even this applies to one of my favorite hobbies. Once upon a time, I was fond of knitting and crocheting. With the birth of babies, I rarely began to knit, but then the moment came when the children grew up a little and I had time to make souvenirs with my own hands.

I suggest you today to tie funny puppies, you can say the little animals of the dogs, which will be made in amigurumi technique. Especially not far off New Year, but the symbol next year there will be a dog. I hope you enjoy my selection.

I will say right away that I took all the pictures and photos that you will see here exclusively from the Internet, selected exactly those that I liked the most, and those that are in the public domain for everyone.

I’ll start with the simplest and most uncomplicated job descriptions to help beginners figure out how to knit such wonderful creations, because they are only at the very beginning of the needlework journey.

I certainly understand that many people like certain breeds of dogs and therefore you would probably want to knit the one that you love the most. Perhaps such a pet lives with you, but unfortunately, I cannot provide you with so many diagrams and step by step descriptions all breeds of dogs.

1. I propose to tie you, for starters, the easiest dog in my opinion in the style of amigurumi.

Such a mischievous blue puppy that any child will be delighted with.

Stages of knitting:

1. First of all, prepare all the tools and materials for work. Tie the legs and body first.

2. Then proceed to the design and knitting of the head.

3. All other parts of the body are knitted separately. Read the instructions and follow all instructions.

2. For the little ones, I want to suggest knitting such a wonderful masterpiece, just lovely, see for yourself:

3. The next option, generally funny, such little cuties can live in your house. They are cute and very small. Yarn will leave absolutely nothing, you can impose a whole bunch of these:

4. You can also crochet a dog keychain.

Do not forget to glue the nose and eyes, ears and paws. Also embroider with a needle and thread the place where the nose, a vertical strip, you can make eyebrows. To make a ponytail, you can simply tie a regular lace from eyelets, and then sew it where the dog's ass is))).

5. You can see a rather simple version of a dog for beginners in this step-by-step photo instruction:

Crocheted amigurumi dogs for the New Year with a description and work patterns

I could not get past this topic, because the holidays are coming, and this is what I found:

All these four options just sunk into my soul, I share one of them on the pages of my website in more detail with all the job descriptions, you can use these pictures to knit such a wonderful little dog. If you have any questions, write your comments, reviews.

Start the craft with the paws, tie two identical paws, and then connect them together.

Thus, they will not be sewn separately.

After you tie the body, tie two paws and ears, and then a muzzle and a red cap, like Santa Claus or Santa Claus.

But the other three master classes, who need to write to me, I will send you to your mail absolutely free, for this, just leave a comment at the bottom of this article))). I will definitely answer.

And you know that the coolest thing is that from a brown dog, or rather a template and schemes, you can make not only a puppy, but other animals, such as a deer, a koala, a bear and a lamb, see for yourself:

The body and head are the same, such a universal layout, just the design is different. Cool and just a great idea!

Master class amigurumi dog toys crochet. footage

Since crocheting puppies is already relevant this year, the time has come when 2018 is just around the corner, so I offer you such detailed stories with such bright multi-colored dogs:

I also suggest you knit an unusual dog or you can say crafts in the form of a ball on a Christmas tree:

And here is another video showing step by step and in detail how to tie a little pug:

White and yellow dog - do-it-yourself symbol of 2018

In fact, the symbol of the upcoming year will be a dog in light yellow colors, this information is taken from Eastern calendar. Although some sources refer specifically to a white dog. I think that in any case, every needlewoman can make such a souvenir of a toy, or a talisman.

Since there were different opinions, I found two master classes in two different color schemes. One is quite easy, the other is a little more difficult, choose the one that you like best.

1. White and so affectionate in the face, a puppy named Bobik will decorate any Christmas tree or act as a decoration on the festive table.

2. Well, in the golden color of yellow shades, here is such a cool and super cute little dog named Chamomile can live in your house:

That's all for me, and in conclusion, I want to offer you a bunch of pictures and photos with knitted dogs from young craftswomen. Do you want one like this??? Bow-wow)))

Perhaps you did not like the options that I showed you before, so choose from these, but here step by step instructions and descriptions with diagrams, I can send you free of charge to your mail, just write a comment below with a request to send master classes of little animals in the form of dogs.

I got such a mischievous family, just super in my opinion!

The selection is large, but what a variety it is.

There are dogs of different breeds, almost all, well, or most))).

These are pugs, poodles, mongrels, chihuahuas, bulldogs, dolmatians, dachshunds, huskies, dogs in the form of a tilde doll and even the hero Druzhok from the cartoon about the Barboskins, Snoopy. And there is a rattle knitting pattern for little babies.

I don't know about you, but I like it.

Look at these charming cuties, there are Bobby and Balls, and even Barbosik with a smile.

DIY crocheted toys have always been valued and will be the most original gifts and, most importantly, safe for children and adults.

I think that all fans of dogs will certainly be happy with such a selection. In addition, I got it for free, of course I had to go to different sites and collect it, so I am happy to share it with you, dear guests and readers of the blog. I hope it will be useful to someone))).

By the way, you can send me your photographs of animals through feedback, just write a letter and I will gladly publish your work here on this site.

That's all for me, I got such a plush and soft selection of toys! See you all! Bye Bye!

Sincerely, Ekaterina Mantsurova