Confetti is of Italian origin, meaning a product made from sugar. In Italy, during street celebrations, confetti was made from candy and other sweets. Later in 1884, the owner of a street cafe decided to surprise his customers. He sprinkled them with chalk balls. After a while, he replaced the balls with paper mugs. Today, these multi-colored finely cut circles are used at balls, carnivals, triumphal processions and other holidays. Making your own confetti is very easy.

So how do you make your own confetti?

To make confetti at home you will need:

• hole puncher;
• scissors;
• double-sided multi-colored paper;
• cardboard;
• foil;
• glossy magazines;
• candy wrappers.

So let's get started. The first thing to do is cut a large number of paper circles with a hole punch. As a result, you will have beautiful multi-colored confetti at home. You can also add circles of white paper, foil, candy wrappers, or take an old glossy magazine and give it a second life. If you don't have a hole puncher, don't worry. You can take scissors and show your imagination, cut various diamonds, hearts, stars, squares, triangles. You can also thinly cut the paper into strips and wind it around the pen shaft. This is how curly confetti will turn out. If you don't want to use foil, you can use old film. As you can see, it is very easy to make homemade confetti. Even a child can handle it.

As previously reported, confetti always accompanies the celebration. Shop crackers hide a spring in themselves or are made using a vacuum system. Due to this, such a loud bang occurs. This great alternative firecrackers. But crackers can be made at home. So why not have a good time and make a New Year's cracker with your child? This method is based on a balloon. There is different ways making homemade crackers.

1 way

Materials:

• air balloons;
• tubes from toilet paper or paper towels;
• packing (gift) paper;
• scissors;
• sequins;
• multi-colored foil and paper;
• glue.

The first thing to do is tie a knot on the balloon and cut off the tip. Next, pull the cut off part of the ball on the tube from paper towels. Make sure it stays on tight. After that, wrap with gift paper and glue the edges. The flapper can be decorated with various stickers, wrapped with ribbons or cut out various figures. Now we fill our firecracker with confetti. For effect, you can pour decorative sparkles with a funnel. If it is not at hand, then make a funnel from a sheet of paper. That's it, the cracker is ready! In order to shoot from it, it is enough to lift the muzzle up and pull and release the tail of the ball. If you don't want to shoot the clapperboard now, then make a lid out of paper or a cut-off part of a balloon.

2 way

Materials:

• cylinder from paper towels;
• corrugated paper;
• adhesive tape: one-sided and two-sided;
• scissors;
• match or toothpick;
• cardboard;
• needle with thread;
• glue;
• confetti.

First you need to circle the tube on thin cardboard. For this, cardboard from the packaging of sweets or tea, chocolate is well suited. The resulting circle must be cut so that its diameter is less than the diameter of the cylinder. Next, cut out a 15x15 square and glue a cardboard circle into its center. After that, we make a hole with a needle and stretch the thread not to the end. At the end of the thread we tie a piece of a toothpick or a match.

We glue double-sided tape on the edge of the tube and glue the square so that the circle with the match (toothpick) is inside the cylinder.

The next thing to do is the decoration of the cracker. Wrapping paper over the flapper different colors. We make confetti.

The last thing to do is the flapper cap. Cut out a circle with a diameter of 15x15 from corrugated paper. Like the square, stick it with double-sided tape to the cylinder.

This type of cracker is reusable. It is enough just to change the used mechanism and fill it with confetti.

3 way

Materials:

• 2-sided colored paper for confetti;
• toilet paper sleeve;
• glue;
• scissors;
• hole puncher;
• corrugated paper;
• Double-sided tape.

First, we make confetti from colored paper. To do this, bend a sheet of paper in several layers and cut into strips of 5 cm. The cut strips must be cut into squares. For round confetti use a hole punch. Cut the toilet paper cylinder in half. The result is two equal parts. Next, cut out a rectangle of corrugated paper. Glue a strip of cardboard in the middle of the rectangle. Glue double-sided tape in the center of the strip. This is necessary in order to secure the bushings. We wrap the cylinders with corrugated paper. If necessary, you can fix the edges with glue. Fill the candy popper with confetti. We tie the edges like candy with threads or thin ribbons. Everything, the cracker is ready. To use it, simply bend it in half.

4 way

Materials:

• paper tubes of different colors;
• small sequins (multi-colored);
• paper;
• bowl (optional)
• scissors;
• Scotch;
• hot gun or glue sticks.

Take scissors and cut the paper tubes into even halves. Bend in half, you will get a bend. Cut them in half. Seal the opening of the tube on one side. For this we need a hot gun.

After the glue has hardened, you can pour the sparkles into the tube. Make a funnel out of paper, insert into the hole paper tube and add the required amount of glitter. Next, remove the excess glitter and seal the tube with glue, and let cool. Flapper tubes are ready. Pull both ends of the paper tube and your cracker will explode.

A bit of history. First Balloon IK was made by Michael Faraday, the material is rubber. It was created for experiments with hydrogen. Today, balloons are one of the favorite toys of children, which have little in common with their distant relatives. On holidays, more and more people use a surprise ball. What is a surprise ball? This is the same balloon familiar to all of us, inside of which are:

• wishes notes;
• sequins;
• confetti;
• serpentine;
• small items.

You can also put candy, paper money or small toys in the ball.

So, there are two proven ways to fill balloon.

First way

The only thing you need is a bottle. It is enough to cut off the neck and bottom of the bottle so that a tube is obtained. A large balloon is inflated a little and the balloon is put on the tube. Next, you still need to inflate and you can start pushing small balls. The balloon is then inflated with a pump. This method is also intended for small toys and small balls.

Second way

As in the previous method, you need to inflate a transparent balloon and fill it with confetti, serpentine, sparkles, wishes notes and much more. When everything you need is placed inside, just tie the tail with a thread. You can inflate the balloon with oxygen. For greater effect, it is better to use helium, and then attach the weight to the thread so that the balloon does not rise high or fly away.

There is also another method on how to make a do-it-yourself confetti balloon. It can be used as a perfect end to the holiday, solemn event or the child's birthday. So let's get started. The first thing you need is a mechanism that will blow up. To do this, we take six large batteries (crown or element 373) and solder them sequentially to each other both from above and from below. This is to get a voltage of 9 volts. Next, solder two wires 1-2 meters long. Now cut off two segments from the adhesive block. We connect on one side a 0.125 W resistor (sold in every electrical store), and on the other side - a wire that comes from batteries. Before making the connection of the wire, you need to make a break. Then pull out one part of the wire and strip off the insulation. The block is glued with adhesive tape. This must be done so that the resistor focuses on the surprise ball. The fuse is related to the distance that the wires allow. When you want to make a surprise explosion, wrap the wires with tape where the gap is. Voltage will go to the resistor, it will start to heat up, and burn through the electrical tape. And the whole surprise will fly.

Surprise is best hung from the ceiling. Just don't forget to warn your guests about the loud end of your evening!

The New Year holidays are ahead and we are already thinking about decorations and entertainment for winter holidays. And what a celebration without crackers! But many do not like the loud sound that is heard during its use ...

But there is a way out - to make a clapperboard with your own hands! So you can keep the silence, but at the same time create a festive atmosphere. And this article with detailed instructions will help you with this.

To make a cracker with your own hands, prepare:

• confectionery syringes;
• confetti, ribbon for decoration;
• paper with a pattern and corrugated;
• acrylic paint, scissors;
• narrow tape and a brush.

It is best to use transparent plastic pastry syringes, so you can get the desired shade.

Step 1. Disassemble the syringes, degrease the surface. So it will be much easier to work with it: the paint will lie down evenly, and the glue will quickly set between layers. Paint the plungers and syringe caps with acrylic paint.

Step 2 While the paint dries, make your own confetti. It's better for him to take corrugated paper- It is lighter, which means it will fall more slowly. Use a scrapbooking hole punch to punch circles out of paper. Make the edges of the blanks curly or leave them even. Cut colored paper into narrow strips.

Step 3 Fill the syringe container with the previously prepared confetti. Try to place all the sequins tightly, but at the same time, do not remember all the blanks.

Step 4 top the syringe must be covered with crepe paper. This is necessary so that the confetti does not fall out until the cracker is used. Cut out a square from paper, wrap around the syringe and tape the edges.

Step 5 Decorate the outside of the container with patterned paper. Glue a bright strip along the contour. So it will not be visible what is inside the crackers, and it will become beautiful.

To put the cracker into action, you need to take it by the container with one hand, and press the handle vertically with the other.

There is another simple version of the children's cracker. It can be done together with the children, and they, together with you, will be able to maintain a festive atmosphere.

She will need the following materials:

• air balloons;
• toilet paper sleeve;
• glue, acrylic paints and brush;
• glitter, scissors and confetti.

Step 1. Together with the children, paint the sleeve with paints and leave it to dry.

Step 2 Spread glue on the cardboard, and while it is still wet, sprinkle with glitter. Determine their number yourself, remove the extra ones.

Step 3 Cut off the round part of the balloon and put it on one side of the sleeve.

Step 4 Pour confetti into the open hole. To make the cracker work, you need to pull the ball and release it. Just explain to the children that you don’t need to pull hard on the ball, otherwise you can damage your fingers.

Such crackers will be a bright addition to the New Year's holiday, especially since you can use them several times!

We usually associate festive New Year's fun with the smell of pine needles, tangerines and, of course, bright colorful crackers. An explosion of brilliant confetti makes you forget about everything in the world and have fun from the heart. Of course, when we talk about crackers, we mean factory products, although it is quite possible to make them yourself from improvised means.

DIY Christmas cracker: all the pros and cons

Flapperboards on New Year are quite important, like all pyrotechnics. They can be easily found on any counter, and they cost mere pennies, but they have big disadvantages. First, the factory product has a small supply of gunpowder, which can be harmful to your health. Yes, it is negligible there, but the fact that it is there makes this pyrotechnics forbidden for children (who, however, regularly violate safety rules). Secondly, the same gunpowder gives a very loud sound during the explosion, so the product cannot be blown up in a room where there are very small children (otherwise the case may end in a strong fright). Thirdly, gunpowder can get damp and simply not explode, which will disappoint you very much. There is a fourth reason why it is worth abandoning factory pyrotechnics - increased fire hazard.

However, a real holiday cracker can be easily made with your own hands at home. At the same time, it will be completely safe and environmentally friendly. Today we will discuss how to make such a craft at home from improvised means. We present to your attention the most creative life hacks for making New Year's pyrotechnics, which you can take to the garden or place in the children's room. The only disadvantage of such products is that you still have to clean up after them.

How to make a paper clapperboard with your own hands?

You can make paper crafts from a newspaper, cardboard tubes, wrapping paper and filler.

To make a homemade confetti popper that shoots, you will need:

• thick cardboard tube. For the base, you can use the middle of paper towels or toilet paper, as well as the body of previously used production crackers;
• wrapping paper (or any other) for decorating the top of the future product;
• a small piece of cardboard to form the bottom and top of the cracker;
• glue gun or PVA;
• toffee thread;
• confetti.

In order to form a cracker, you first need to work on the bottom of the product. To do this, cut out a circle, in diameter it should be slightly larger than the hole in the base. Pull the thread into the center with a needle and secure it with a knot. Glue the bottom to one end of the tube, sealing it tightly. At the same time, do not forget to glue the edges well - they should securely fix the bottom without the slightest crack (it is easy enough to check this by simply looking through an open hole at any light source).

The next step is decoration. Wrap a cardboard cylinder with wrapping paper, decorate with ribbons, beads, sparkles.

Using a regular funnel for liquids, pour confetti inside the future cracker and close the tube with a paper cone. It also needs to be well sealed - the better you do it, the louder the cracker explodes. In order to put the mechanism into action, it is enough just to sharply pull the string and release a light cloud of confetti (if desired, it can be supplemented or replaced with serpentine).

Flappers from a sheet of paper

To make a cracker that shoots loudly, it’s not at all necessary to build cunning designs for a long time - for this, an ordinary A4 album sheet or a simple notebook sheet is quite enough (it depends mainly on what you have at hand at the moment). On the Internet you can find a whole diagram of how to make a double clapperboard with your own hands. Step-by-step instruction it looks something like this:

• the sheet must first be bent horizontally, dividing it in half. So you form an axis to which you need to bend all the corners of the leaf;
• then you should fold the leaf in half again and bend the corners so that they touch;
• bend the structure in the center and in a horizontal position;
• hide the corners inside and the cracker is ready.

By following all the instructions step by step, you will get a wonderful cracker with which you can play a trick on your friends or be the center of attention. If it is difficult for you to imagine the essence of what you read, step-by-step illustrations will come to the rescue, which are very easy to find on the Internet.

If you like simple, but at the same time interesting products made from plain paper, then you definitely need to take a closer look at how you can make an origami cracker. This ancient Chinese art of paper craft involves several forms of a fairly loud product at once. It can be an intricate cube that has the correct square shape, which real masters can do (or after long enough training), or you can make a simple frog that makes a loud "fart" sound.

How to make a cracker from a balloon?

The simplest and effective method make a loud cracker that explodes with a huge cloud of confetti - use an ordinary balloon. To do this, you need to fill it with small colored scales using a funnel, and inflate it properly. Further, during the New Year's holiday, one sharp pin will be enough for you to burst the balloon and throw up a whole sheaf of airy confetti into the air. A similar method of preparing festive mini-fireworks has long been used by the inhabitants of Mexico. These, of course, are the familiar piñatas (papier-mâché figures filled with multi-colored sparkles and sweets), which, although they are made without a ball, however, have a very similar principle of operation.

How to make a cracker from a syringe?

This type of cracker is rightfully considered the most spectacular and effective. In order to make one such cracker with your own hands, you will need two large syringes, a glue gun, a balloon and decor paper. The assembly principle is quite simple:

• a base pipe for the future product is made from one syringe (for this, it is cut off from the side of the main mechanism and the needle mount is completely removed);
• then both syringes are connected with hot glue, the cut syringe is filled with confetti and hermetically sealed with a rubber ball:
• the piston of the second syringe should be pulled out as much as possible;
• after minimal decoration, the cracker is completely ready for work.

The principle of operation of such a craft is the same as that of a conventional pneumatic cracker - by sharply pressing on the syringe valve, you create powerful air pressure that tears the ball and releases confetti. A similar principle of operation has a homemade cracker from plastic bottle, into which air is pumped using a conventional automobile nipple. It is he who serves as a trigger to release the contents of the bottle.

How to make a cracker from matches?

Such crackers do not dare to call either environmentally friendly or safe. The principle of operation is approximately as follows - matches are placed in the container according to the principle, the more the better (this applies only to match heads), then a fuse is made from a box of matches, which then need to be set on fire. But before you make such a cracker, you need to think about the fact that one careless or slow movement, and this explosive mixture of wood and sulfur can explode just in your hands. In addition to the damage caused by the blast, you also risk burns to your hands and face. That is why you should think carefully when making pyrotechnics with your own hands. For the same reasons, you should not make a cracker out of firecrackers or gunpowder. Remember, not only your health is at stake, but your life as well.

Clapperboards with gifts

You can surprise your guests with an original cracker with small souvenir gifts. For the first time, similar products began to be produced for wedding celebrations- in a small cracker they used to hide the bride's garter. However, over time, it became fashionable to use such pyrotechnics for the New Year. You can make it yourself by making a small piñata with a rope, pulling on which you can release the contents. When organizing children's holiday It is better to fill such a cracker with sweets.

Factory pyrotechnics are products of increased danger, so there is a reason to replace them with simple and absolutely safe firecrackers that you can make at home.

Difficulty level: Easy

What you will need:

• Multi-colored paper / foil / cardboard / oilcloth
• sketchbook
• paints
• hole puncher

1 step

First you need to prepare the material. If you have the right multi-colored paper/foil/oilcloth, then go straight to Step 3.

2 step

If you do not have the above listed, then take an album for drawing and paint. Color the sheets of paper in the saturated colors you need. Let the paints dry.

3 step

Take a hole puncher and start punching holes in the paper (or whatever you chose as your candy blank). Circles of multi-colored confetti will be collected in a special compartment in the hole punch (if there is one) or immediately fall out onto the table (in this case, place a newspaper, plate or something under the hole punch where pieces of material will collect).

4 step

You can also make symmetrical drawings on paper using a hole punch. Fold a sheet of paper in four and punch it with a hole punch in some sequence (line, snake, spiral, etc.). Now expand the sheet and see how interesting it turned out.

• The game of "confetti" may appeal to children. If you do not have time to use a hole punch, then the kids will be happy to make confetti themselves. Especially later, when they can throw colorful decorations in the air, they will be convinced that their labors are rewarded with embodied fun.
• Also, children will like to "perforate" the drawings.
• If you want to speed up the process of creating confetti, then get a hole puncher with a lot of punched holes.

New Year is an exciting and fantastic holiday. Every time I want to celebrate it in my own way, to bring an original zest to the celebration of this day. To surprise and delight your children, you can buy firecrackers at the store. However, their use is dangerous, and unforeseen situations can overshadow the fun. Try to create simple and bright products yourself. very easy to do by hand. However, it will definitely become a great decoration for the holiday.

What materials will be needed?

For the manufacture of beautiful crafts you need to prepare a cardboard roll, for example, from used toilet paper, colored and papyrus paper, adhesive tape, glue, thread, rhinestones for decoration and confetti. As filling, you can use mugs of bright colored paper made with a hole punch, small sweets or paper money. In general, what is enough for your imagination.

How to make a clapperboard out of paper?

1. Start making crafts from the bottom cover of the cracker. To do this, you need to cut a circle out of cardboard so that it completely covers the hole in the pipe. Paste it on colored paper to then attach the remaining ends to the workpiece.

2. Now we thread the thread through the center of our cardboard circle, fasten it inside with adhesive tape. This is the very part that you will need to pull so that a surprise spills out of the craft.

3. To understand how to make a cracker out of paper, it remains to fill the pipe with confetti and make the top cover. Cut out a circle, cut it along the radius and connect it into a cone. This is the future clapperboard cover. It remains to glue it with the pipe.

4. Our double clapperboard from paper will look original if you decorate it with colored or papyrus details on the outside. You can use rhinestones, ribbons or beads of various colors, sizes and textures. We attach all the details of the decor with glue or tape. Here's how to make a paper clapperboard with your own hands in just a few minutes.

How to use the clapperboard?

Made multi-colored firecrackers can be hung over your head on a rope, at a sufficient distance so that the child can reach the thread. That is why you should not use heavy elements for filling. In the event of an "explosion", they can get into the eyes or in the respiratory tract. It is best to use light confetti. And then, pulling the rope, enjoy the charming view of fluttering paper. Surprise confetti can be purchased at the Stationery store or made on your own using a regular hole punch.

Conclusion

Now you know, the manufacturing process will be more interesting if you create with the whole family. Children will be happy to make colorful confetti with an ordinary hole punch. Such a cracker can be made of any size: from miniature to huge, it all depends on which pipe will be used in its basis. If you do everything right, then New Year's celebration sure to succeed, and guests and friends will be surprised and satisfied.