They invited us the other day to a party for the kids. It was necessary to come at least in a suit, but there was no suit at all due to unpreparedness. The best and fastest option for me was the transformation of Max into the White Tiger with the help of the remnants of striped fur. We had to leave in a few hours, so improvisation and ease of approach played a big role.

There was very little fur, so the costume consists of a tail, ears, a butterfly and paws. Cut out fabric rectangles.

Paws on the left, a butterfly at the top, ears at the bottom. Plus a long tail. We sew a rectangle for a butterfly, turn it inside out, collect it in the center on a thread and wrap it with a ribbon. The design is attached to the shirt using the same tape.

The tail is sewn, turned inside out, fastened to the white panties by the loop with a pin.

We cut out the ears in circles, sew them together, turn them inside out and fasten them with hot glue to the rim, bought in a stall for 30 rubles.

We collect the paws in the center, slightly tighten and fasten the tape for tying. My future Tiger Cub categorically refused to put on his paws, which saved his mother another 15 minutes of time.

It was planned to paint the face: draw a mustache and a black nose; but due to the small age of the model, this idea failed, and my mother's nerves became weaker by a couple of hundred nerve cells. Therefore, I drew a mustache in Photoshop for this master class 🙂 Well, our Tiger cub is ready.

In order to sew a tiger costume, we need tiger fabric. Next, the costume can be sewn according to detailed description on that website. The completion of the image will be tiger makeup on the child's face.

Many mothers are preoccupied with finding the right New Year's costume for their baby. Especially if the room is cold. Whom to dress up your baby, what would be warm and beautiful? The answer is simple - you need to sew a tiger costume. For example, like this

The basis of this costume is a jumpsuit made of tiger-colored fabric: thin plush, fleece, velor or faux fur. It is sewn according to a similar pattern:

Optionally, you can sew a yellow tummy, add a tail.

Pay attention to the headdress of the costume. After all, this is what most often causes difficulties. Here everything is done simply and interestingly - an ordinary cap was sheathed with the same fabric, two ears were sewn on.

Sew new Year costume Tiger for the New Year you can sew a suit like this as shown in the figure, starting from the top but with a hood, then from the pants, not forgetting to sew a tail in the back. When the hooded suit is sewn, you can start sewing on the ears.

If your child wants to go to a matinee in a tiger costume, then you can only rejoice. After all, the tiger costume is bright, beautiful, and most importantly, your baby likes it.

See what beauty? In such a suit, your baby will definitely not get lost among his peers, whether it's a matinee, birthday, New Year or other holiday.

How to do it? I advise you to watch the video on this link, where a review of the costume is made in great detail. This is to prevent a large number of errors. And this link made a review of such a suit with Aliexpress.

tiger costume can be made according to a simple pattern of overalls. It seems to me that the jumpsuit would be very appropriate here. You can use any pattern from the magazine. For example, if you sew a jumpsuit for a child, you can find a lot of patterns in the Ottobre magazine. For an adult, you can find a pattern in the magazine Burdaquot ;.

I suggest getting one.

Please note that the pattern is created using ready-made clothes, which sits freely on the figure. I signed everything and now it will be easier for you to build such a pattern on your own for any figure, height, age.

Also look at the hood pattern. She is very simple. But if we sew velor or artificial fur ears to the finished hood, it will be very beautiful, you must agree.

It also makes sense to sew a zipper on the back. In general, the fabric can be any. But I would choose something with a beautiful animal print. And this, of course, is only artificial fur).

It is easy to work with, but do not forget to remove the villi. The best way to do this is with a vacuum cleaner.

It is easy to make a tiger costume for a girl even from what is in the house and from clothes, that is, from improvised means - quickly and cheaply)

You will need black leggings, pants, trousers or tights at worst. The same color jacket, sweater or tunic. Additionally, orange / yellow material, from which to put on tiger stripes and sew on clothes. Separately sew the tail.

Attach cardboard ears to the headband. Make up on your face.

However, the suit can also suit a boy, only a boy can sew or knit a hat with ears instead of a rim.

There is another version of the tiger costume, it can be completely sewn. Costume patterns and description

Tigers have always been and will be in great demand on New Year's party, this is a bright costume that always arouses admiration and interest.

It is better to sew a suit from velor or fleece, you just need to find a yellow or white color.

And you can also make your own original costume and then the tiger will be the one and only.

We take plain shorts and a T-shirt and fingerless gloves. We make stripes, sew on an additional tail, apply makeup and the costume is basically ready.

You can wear orange shorts and a T-shirt, or you can make an elegant black and white tiger stripe and a striped bow tie. To add key chains in the form of deer and antelopes attached to the hand, it seems like a tiger came with prey.

Tips for choosing fabrics and accessories
Low pile faux fur; any soft fabric(velor, fleece, velvet) yellow or white color for the tummy and ears; fringe; synthetic winterizer; elastic band, long zipper, Velcro contact tape (Velcro).

Work description
1. Simulation
Can be used finished pattern overalls with a hood. can be modeled based on basic pattern. To do this, you need to combine the waist lines on the details of the shelves and trousers.

Pattern preparation.
Change the details of the basic pattern as shown in Figure 1.
Draw the missing parts (4 - 6 in Fig. 2) yourself.

As a result:
1. Front half - two parts
2. Back half - two parts
3. Hood - two parts
4. Sleeve - two parts
5. Ear outer and inner (5a) part - two parts each
6. Mane - two details
7. Tummy - one piece with a fold
8. Tail

2. Tailoring

Overalls.
Run the front curved seam up to the cross mark. Sew on a hidden zipper. Stitch side and shoulder seams. Then stitch the crotch seams. Sew a hood into the neck, after completing the middle seam. Stitch the seams of the sleeves, sew the sleeves into the armholes. Tuck the bottom of the product and the bottom of the sleeves and hem, decorate with a fringe. Tuck the hem allowance of the hood, topstitch, leaving the entrance to the drawstring open.
mane sew on. Insert an elastic band into the drawstring, choose the length, fasten. To the front of the jumpsuit in 4 places, sew Velcro (with eyelets) to attach the tummy. Tuck in the removable part "tummy", hem with a hidden seam. Sew the second halves of Velcro (with hooks) symmetrically.

Ears.
Cut out the outer part of the ear from fur, the inner part from velor. Sew erect ears according to the description

Tail.
The tail is sewn from fur, the tip is from velor. Not very tightly stuff with padding polyester and sew to the overalls.

Makeup.
For information on how to make makeup for a Tiger cub, see.

Mask.
The mask can be made of cardboard, attach a hat elastic to fix it on the head.
We offer two options for a life-size mask: color and black and white, for self-coloring.

Download mask pattern:

Note! For a mask worn on the face (with slits for the eyes), the distance between the drawn pupils should be 55-57 mm. If the dimensions are distorted when printing, adjust them yourself.

What an indescribable pleasure it is to prepare a New Year's costume for a boy! First, together with him, choose a character in which to dress up, then think through all the details ... A little imagination, work, desire - and now the New Year's costume for the boy is ready!

Groups of carnival outfits

Everything fancy dresses can be divided into several groups:

• people;
• flora representative;
• fauna representative;
• fabulous creatures;
• inanimate objects.

Carnival outfit from the category of "people"

The easiest New Year's costume for a boy to make is an outfit from the "people" section. Such can be the attire of a musketeer, a pirate, a robber, an elf, a gnome, Dunno, Pinocchio, Karabas-Barabas, superman, an astrologer, a sorcerer.

To create it, sometimes you don’t need to sew, glue or paint anything. It is enough to search in the pantry among the old things for suitable clothes, add the necessary accessories, make the appropriate makeup. In some cases, you need to take care of the manufacture of a beard, a crown, weapons, glasses, an eye patch, sockets for over the knee boots and other details of the costume.

For example, to make a New Year's costume for a boy who decides to be a king at a masquerade, you will need elegant pants and a blouse, a crown and a mantle. Actually, you will additionally need to make a crown. It is easy to cut and glue from paper, decorating Christmas decorations, foil, glass buttons and beads or rhinestones.

The cape is also quite easy to make. A rectangular piece of fabric is gathered on top of the drawstring and tied under the chin. Sometimes a high stand-up collar is required.

from cardboard

You can make a carnival outfit from almost everything that is at hand. For example, by disassembling cardboard boxes, it is easy to make knightly armor out of them by securing the parts with adhesive tape. The sword and shield can also be made from cardboard. But it may well turn out that there is a baby in the family who has a toy weapon.

To make the costume look more believable, it is recommended to paste over it with silver paper on top and decorate it accordingly (for example, apply heraldic patterns, paint a shield, etc.)

Carnival outfit from the category of "representatives of the flora"

Taking vegetables, fruits or berries as a prototype, you can make very beautiful New Year's costumes for boys. It can be Tomato, Cucumber, Radish, Pea, Banana, Peach, Mushroom and others.

Even the most inexperienced dressmaker will be able to sew which will depict Peach or Strawberry. To create volume, the outfit itself is made in the shape of a ball. Drawing patterns of New Year's costumes for a boy from the category "vegetables, fruits, berries" is very simple. This is a rectangle, one side of which is equal to the circumference at waist level, and the other is the height.

Having cut out the desired figure in size, the fabric is sewn together, folded face inward so that a "pipe" is obtained. On the top and bottom of this part, you can make several darts. Then both edges are hemmed, making drawstrings into which the laces are inserted.

In order for the roundness not to lose its shape, you can put inside a synthetic winterizer, foam rubber or inflated air balloons. Some craftsmen prefer to pre-quilt the fabric from which the suit is sewn with a synthetic winterizer or Then it is not necessary to put a filler inside.

Additionally, you will need to make hats or hoods for some outfits. Other costumes can be decorated with green collars that will imitate the sepals of berries.

Open carnival outfit from the category of "representative of the fauna"

To make the outfit for the carnival of high quality and comfortable to wear, you can sew a New Year's costume for a boy in the form of a jumpsuit. This option is suitable for any mammal, be it a Deer, Elephant, Bear, Tiger, Rooster, Dinosaur or even a flying Dragon. Overalls differ only in color and the presence of some details: bone protrusions in dinosaurs and dragons, horns, wings, trunk and crest.

To make a New Year's costume for a boy with your own hands, patterns of overalls details are simply necessary. They should be transferred to paper, cut out with scissors and laid out on fabric. The product will require four such parts. Moreover, two of them should be cut out, attaching the template with one side to the fabric, and the other two are cut out asymmetrically, since the fabric is first folded in half face inward.

It should also be noted that there will be a zipper on the back, so two asymmetrical parts must be cut out with this in mind and a special allowance should be provided. The front halves are cut along the line, which is signed on the drawing as "the middle of the front".

Sewing overalls for an animal costume

The details are first sewn in pairs face to face so that two halves of the product with one sleeve and one leg are obtained. Then the front seam is made, the edges of the sleeves and legs are hemmed, making drawstrings for gatherings in them, and the neck is treated with an inlay. Lastly, a "lightning" is sewn into the overalls.

In order to make a truly beautiful New Year's costume for a boy with your own hands, you need to sew or glue an animal mask. You can take the path of least resistance and get by with a banal half mask. There is an option to make a volumetric papier-mâché mask. Some craftswomen choose to sew a hat or hood with ears sewn on the top of the head with fabric horns stuffed with filler, and an overlay in the muzzle area, into which a synthetic winterizer or foam rubber is also placed. Eyes and a nose pip are made from large beads or buttons.

Carnival outfit from the category of "fairytale creatures"

These are, for example, New Year's for boys. There are several options for creating this outfit.

The easiest way to pick up white pants and from white coat build a health worker upper part outfit, cutting off the bottom half. The lower edge of the blouson obtained after shortening is hemmed so that a lace can be inserted inside the hem. Large black buttons, a bright striped hat and a scarf complete the snowman look.

Tailored snowman outfit

It is good for those who know how to sew. Indeed, with the help of scissors and a needle, needlework masters easily create professional New Year's snowman costumes for boys from white fabric.

For example, according to the algorithm for making spherical outfits for fruits and berries, you can make two or three parts different sizes. The ball with the largest diameter is placed down. A second, slightly smaller size is sewn to its upper part. The smallest one should be on top. A bucket glued from cardboard is put on the head of the child, a scarf is tied around the neck.

In the form of overalls, you can also sew a New Year's costume (for a boy) with your own hands. Patterns for him are the same ones that are offered as patterns when sewing animal costumes. The manufacturing algorithm is also no different from that described above.

Carnival costume from the series "inanimate objects"

Those wishing to be the most creative and unique at the holiday, experts advise dressing up as a Samovar, Teapot, Fire, Book or other inanimate object related to inanimate nature.

Making a Book costume is easy. You just need to make a giant cardboard cover, colorfully decorate it with the name of the printed publication, the name of the author, and place some pictures. This cover is attached to the front.

The Kettle costume must be sewn according to the principle of the fruit outfit. You should get a ball of bright red fabric, such as polka dots. A beret of the same color with a large eyelet can flaunt on the character's head. On one side, you can sew a handle made of white fabric, and on the other, a teapot spout. Both the handle and the spout are best stuffed tightly with filler.

smallfriendly.com

To turn a child into a magical creature with the body of a lion, the head and wings of an eagle, you will need:

• beige or yellow jacket and pants - this will be the body of a lion;
• fabric and thread brown or beige colour for the tail;
• two pieces of felt or fleece for the wings and chest: one is lighter, the other is darker;
• cardboard and paint for the mask;
• glue;
• stapler.

To make a ponytail, roll the fabric into a tube and glue the edge. Then sew or attach a thread tassel with a stapler suitable color. After that, the tail can be sewn to the pants.

incostume.ru

To make wings, draw a pattern on paper with sharp, torn feather edges. Then make two more templates for other layers, each narrower than the previous one. Transfer the templates to felt, cut out the wings and sew them together, placing the darker fabric between the lighter layers.

Sew the finished wings to the jacket. Make finger loops at the ends so that the child can flap his wings and they are constantly in motion, and not hanging behind his back.

smallfriendly.com

Using the same principle, make feathers on the chest from three layers of fabric.

smallfriendly.com

If you don't want to work with fabric, you can make wings out of cardboard and paper.

Next important point- mask. The photo below shows a variant of a beautiful cardboard griffin mask. Cut out the pieces first, then glue them together and color them in.

alphamom.com

An owl costume is easier to make. Take:

• black or gray long-sleeved T-shirt;
• several cuts of fabric in gray and brown shades;
• cardboard or paper and paint for the mask.

Download and print the template, transfer it to the fabric and cut out the feathers different colors. Sew them onto a T-shirt in a checkerboard pattern.

Owl feathers / alphamom.com

The owl also needs a mask with a beak. You can make a simple version of cardboard or complex paper masks. Here are some examples of colorful fantasy masks:

parents.com

For the sheep costume you will need:

• bodysuit or overalls;
• glue;
• about 50 white pom-poms (available at craft stores)
• white and black felt for the ears;
• hat or felt for a hood.

Cut off the sleeves of the bodysuit, glue the pompoms on it so that there is no free space left. Then cut out two black ears and two white ones from the felt. Glue the black felt on top of the white - this will be the inner layer of the ear.

Glue the ears onto a hat or hood, and then cover the entire surface with pompoms.

For the shark costume you need:

• gray hoodie;
• white, gray and black felt;
• thread or glue for fabric.

From gray or white felt, cut out the dorsal fin, from white - a row of teeth and a circle for the belly, from black - eyes.

livingwellonthecheap.com

Sew or glue all pieces to the sweatshirt. If the sweatshirt has a zipper, cut the white circle in half and sew the halves on either side of the zipper.

livingwellonthecheap.com

coolest-homemade-costumes.com, parents.com

You will need:

• wide-brimmed straw hat;
• fabric glue;
• stuffing for toys;
• red and white fabric: red felt or plain cotton can be used for the outside of the hat, white cotton or crepe is suitable for the inside;
• white lace.

Cut out a circle from the red fabric and sew it to the top of the hat, leaving room for the filler and a hole through which you will put it. Stuff the hat, evenly distributing the filling so that it takes the shape of a mushroom. Evenly distribute the filler inside the mushroom cap, and then sew up the hole.

Sew white fabric on the inside of the hat so that it resembles mushroom plates. Next to the head, sew several layers of lace, like a fringe around the leg of the fly agaric.

burdastyle.com

fairfieldworld.com, lets-explore.net

If your child loves the Harry Potter movies, you can make him a Hogwarts student robe. To do this, take:

• a piece of black fabric;
• a piece of fabric in the color of your favorite faculty;
• cardboard for faculty patches;
• tie or scarf in the colors of the faculty.

The gallery below shows the basic steps for making a mantle. The fabric of the top layer of the robe must be black, and the color of the lining depends on the faculty.

Sew a House badge onto your robe. You can cut it out of paper or order it, for example, at the Masters Fair. You can also complement the outfit with a striped tie or scarf from Gryffindor or another house. Both can be bought for 400-700 rubles.

Approximately according to the same scheme, you can make a wizard's mantle with stars. For her you will need:

• a piece of blue fabric;
• shiny yellow fabric or golden wrapping paper for stars;
• hard felt for the cap;
• Magic wand.

Sew the wizard's robe according to the pattern above, but without the front slit and lining. From above, randomly sew or glue the stars.

Cut out two triangles of the desired length from hard blue felt and sew them together, glue the stars and crescents, as on the mantle. Also, the cap can be made from a sheet of blue cardboard with stars from gold wrapping paper. And don't forget about magic wand!

You will need:

• yellow hoodie or yellow longsleeve and hat;
• blue denim jumpsuit;
• black gloves;
• swimming goggles or homemade minion goggles.

halloween-ideas.wonderhowto.com

To make glasses, take two pieces of PVC pipe with a diameter of 7.5-10 mm with an oblique cut and six small nuts.

youtube.com

Coat the pipe cuts and nuts with silver paint and let them dry. Then glue the pipe pieces to each other to make glasses. Top, bottom and sides decorate them with nuts.

youtube.com

Make a few holes on the sides with an awl and sew on an elastic band.

youtube.com

8 Rey From The New Star Wars Trilogy

thisisladyland.com

Rey's costume from the Star Wars universe can be made without thread and glue. The main thing is to find the right things:

• white or gray shirt;
• gray pants;
• brown leather belt;
• gray wool tights;
• black boots;
• long gray scarf

thisisladyland.com

From tights you can make armlets, from a scarf - a cape. Just throw it around your neck, cross over your chest and leave the ends to fall freely, securing at the waist with a belt.

You can complete the costume with a Jedi sword or a papier-mâché BB-8.

thisisladyland.com

The costume consists of wings and a hat with a mustache, the rest of the clothes are up to you. It can be a T-shirt with pants or a skirt or a smart dress. The main thing is that they are black or red with a black dot.

For the wings and hat you will need:

• two sheets of red A3 cardboard;
• black paint;
• foam sponge;
• red laces and tape;
• black nylon tights;
• flexible sticks for children's creativity (can be bought on AliExpress).

Cut out wings from cardboard, take a foam sponge cut in the shape of a circle, and put black dots.

thisisladyland.com

Make holes in the wings, thread the red string as shown in the picture below, and seal with tape. In the resulting loops, the child will thread his hands.

thisisladyland.com

To make a hat, cut off a thick stocking nylon tights, tie a knot at one end and turn inside out so that it is not visible. Toward the end, make two neat holes. Pass the black stick through one hole and pull it out of the other.

thisisladyland.com

Bend the tips of the stick to make insect antennae. The costume is ready.

triedandtrueblog.com

Toothless is the cute black dragon from How to Train Your Dragon. For this costume you will need:

• black hoodie and pants without logos or graphics;
• black fabric for horns, crest and tail: it should be at least approximately similar to the material of the sweatshirt;
• black and red felt and white paint for part of the tail;
• stuffing for toys;
• paints, old glasses or cardboard for the eyes.

Sew four horns: two larger and two smaller. Stuff and sew them to the hood.

Calculate the length of the crest and tail so that the tail just touches the ground. Sew a notched comb and tail.

triedandtrueblog.com

Cut out two blades from black and red felt and sew on either side of the end of the tail. On the red part with white paint, draw a horned helmet.

Cartoon Toothless Tail / vignette2.wikia.nocookie.net

When the comb and tail are ready, sew them to the back of the sweatshirt.

For the eyes, you can use lenses from old glasses. Draw Toothless's yellow eyes with vertical pupils on them and glue them to the hood. If there are no lenses, you can make eyes out of cardboard.

The main costume is ready, it remains to make the wings. For them you will need:

• flisofix;
• two wire hangers;
• black fleece;
• 45 cm gum;
• threads;
• scissors;
• wire cutters.

Print out the pattern and cut it out of paper. Transfer the template to the flesofix sheet.

feelincrafty.wordpress.com

Lay the fleece wings on the wrong side of the fleece with the adhesive side against the fabric and iron. Cut the fleece to the shape of the wings.

feelincrafty.wordpress.com
feelincrafty.wordpress.com

Remove the paper layer from the wings, spread the "bones" of the wings from the wire on the adhesive layer. Then lay the fleece on top and press firmly with an iron so that the glue and fleece adhere. Cut the fleece to the shape of the wings.

feelincrafty.wordpress.com

Sew the wings along the outline, and then around each "bone". Then sew on elastic bands so that the child can put on the wings.

feelincrafty.wordpress.com

Toothless costume is ready. And the wings can be used for other costumes, for example, a bat.

If you are not confident in your abilities, order.