Today, many are interested in the question of New Year's crafts with their own hands. So, making a snowman and surprising everyone is real. Craft from a snowman will extend new Year mood for a few months and decorate the house. If the snowman is small, then it can be hung on a Christmas tree. When a snowman is of solid size, they put it on skis, give sticks in their hands, and it proudly stands on the table.

The snowman can be dressed in different ways at your discretion. He smiles and stands on skis with a bag of presents on his back. Thanks to step by step wizard it is not difficult for the class to sew it. This type of handicraft is called stocking doll. Now this technique is experiencing a real boom. After all, a hand-sewn doll brings good luck to the house.

Quick master class - how to make a snowman with your own hands

You will need the following materials and tools:

• Tights white color 20 - 40 den and a piece of orange nylon
• Sintepon Standard 150 - 250 g / m2
• Reinforced threads 35 LL or polyester 40/2 Gamma or Bestex
• Doll needles, pins
• Colorless nail polish
• Copper wire with a diameter of 1.5 mm and a length of 0.6 meters
• Fleece any color
• Piece of white fur
• Linen plumbing
• Eyes with a diameter of 21 mm
• Dry cosmetics: shadows, blush
• Strong hold hairspray
• Thick cardboard A4 (2 sheets) and corrugated cardboard
• Tape - brown ribbon
• Paper clip
• 2 bamboo sticks
• piece of twine
• Christmas tinsel
• Bell or bell
• Scissors
• Pliers
• Glue gun and sticks
• Tweezers
• Black CD marker

Step 1 Snowman Head

• 1. Separate a thin layer from a common piece of synthetic winterizer and lay it on the table with the fluffy side down.
• 2. Insert the workpiece into the nylon pipe and add two synthetic winterizer balls for the cheeks. Fasten the fabric with a thread, cut off the excess from the bottom with scissors.
• 3. Above one of the cheeks, enter the needle at point 1 and lower yourself to point 2, under the cheek.

• 4. From point 2 return to point 1.
• 5. And again go to point 2 to secure the tightening.
• 6. From point 2, lay the thread over the capron to point 3, enter it and exit at point 4. Pull the thread well, forming a mouth; point 3 and point 4 are symmetrical, respectively, point 1 and point 2.
• 7. From point 4 go to point 3.
• 8. For a more textured mouth from point 3, make a small stitch to point 5 and enter it.
• 9. And go to point 1, pull the thread.
• 10. From point 1, descend to point 2.
• 11. Stitch up to point 6, enter it with a needle.
• 12. And exit at point 4.

• 13. From point 4 go down
• 14. To point 7 near the lower node. Fasten the thread.
• 15. Drag a place for a nose - carrots. To do this, rise from point 7 to point 8.
• 16. Stitch up to point 9 and enter point 9.
• 19. Make a small stitch up to point 10 and enter it.
• 20. And again go down to point 7.
• 21. From point 7 rise to point 10.

• 22. Stitch up to point 8 and enter point 8.
• 23. And go to point 7, where you finally pull and fasten the thread.
• 24. Pull the peephole attachment point. From point 7, rise to point 11 in the area of ​​\u200b\u200bthe future eye sockets.
• 25. Stitch from point 11 to point 12 and return to point 7, tighten the thread well.
• 26. Then go up to point 13.
• 27. Stitch left to point 14 and enter it.
• 28. And exit at point 7.
• 29. Where to finally tighten the thread and secure it.
• 30. Finally fasten the nylon from above with a thread, cut off the excess nylon with scissors.

• 31. Apply dry makeup to the doll's face, working with shadows on the corners of the mouth, and with pink blush on the cheeks and chin. With dark terracotta blush, paint the lower lip and set the makeup by covering the face with strong hold hairspray twice.

• 32. Choose suitable eyes for the image of your doll and use pliers to bite off the thread. On the reverse side apply glue with a hot gun and stick them in place.
• 33. For the nose - carrots, tightly roll the synthetic winterizer with a cone 3.5 cm long, cut off the fluffy end with scissors. Wrap the workpiece with orange nylon folded in half and secure it with a thread. Do not cut the thread.
• 34. Enter the needle into the previously drawn-in place for the spout.
• 35. And bring it out at the back of the head.
• 36. Apply glue from a hot gun around the knot, put your nose in place and pull the thread well. Wait for the nose to stick.
• 37. Cut off the excess thread with scissors. Use a marker to draw dashes, imitating real carrots.

Step 2 Snowman Body

• 38. From the padding polyester, form a blank for the body with a diameter of 10 - 11 cm and wrap it with a piece of nylon, which is secured with a thread. Cut off excess fabric with scissors.
• 39. Try on the head to the body to determine the size. If everything suits you, then sew the head to the body in a circle twice.
• 40. For feet, roll up the sintepon rollers. Wrap with nylon and secure with thread. Cut off excess fabric with scissors.
• 41. On the finished feet of the snowman, apply glue from a hot gun and glue to the bottom of the body.
• 42. Further work on the feet and body. Enter the needle at point 14 and leave the end of the thread free.
• 43. And go up to point 15 - this is the place where the handles are attached.

• 44. From point 15
• 45. Get down to point 16
• 46. ​​Where tie both threads in a knot. Then cut off the excess with scissors.
• 47. Similarly, pull the second foot.
• 48. For handles, bend the copper wire frame and sew on sewing machine two thin pantyhose pipes (you can use your hands).
• 49. Wrap the frame with a thin strip of synthetic winterizer and put on nylon blanks.
• 50. From above, nylon collect on a thread.
• 51. Fold a small piece of fleece in half, cut out a blank for a mitten.
• 52. And stitch it on a typewriter. Unscrew with tweezers. Put mittens on the handles to keep the snowman warm and secure with a few drops of glue from a hot gun.

• 53. Wrap a thin strip of fur around the mittens and secure it, thus making the edge.
• 54. Finished handles attach to the body and sew or secure with a glue gun. The snowman smiles and is already pleased.

Step 3. Hat and bangs

• 55. For the hat, take a sheet of cardboard and cut out three blanks.
• 56. Glue the rectangular blank in the form of a cylinder, the diameter of which should be 2 mm less than the inner diameter of the ring.
• 57. Next, glue all the blanks with any floral fleece and then assemble them into a hat with a glue gun. To do this, put the circle on the cylinder and apply glue.
• 58. Then pull the brim of the hat to the very edge.

• 59. Glue the bottom of the hat on top.
• 60. With your hands, bend the finished hat in different places, giving it a crumpled look. Try on a hat for a snowman.
• 61. And glue the ribbon.
• 62. For bangs, take a piece of sanitary flax and apply a strip of glue on it. Allow the glue to cool slightly and squeeze the fibers together with your fingers. Cut the linen with scissors at the place of gluing.
• 63. Glue the finished bangs to the head, and fasten the hat on top. Additionally, decorate the hat with bells, bells. bows and other decorations.
• 64. Glue small buttons on the snowman's tummy.

Our snowman is ready.

Step 4. Skis and herringbone

• 65. For skis, cut out four identical blanks: two from corrugated cardboard and two from thick cardboard.
• 66. Unfold a paper clip and bend it so that it forms an angle at the top.
• 67. Attach it to the cardboard blank and secure with a glue gun.
• 68. Place and glue a thick cardboard blank on top.
• 69. While the glue has not dried, bend the sharp end of the ski. Make the second ski in the same way. Finished skis can be painted with paint. To give them a realistic look, stick a self-adhesive film under the tree on them. Glue the skis to the snowman's feet.
• 70. For ski poles, take two bamboo skewers and cut out two circles from corrugated cardboard. Cut the sticks to the desired length and put mugs on them.
• 71. For the wrist strap, take a small piece of twine. Make a loop of such a diameter that it is worn on a mitten. Fix it on a stick with glue, then make a few turns down. Secure the rope with glue.

• 72. Similarly, make the second ski pole. Put the straps on your mittens. The snowman smiles again and is pleased.
• 73. Cut a scarf out of fleece.
• 74. Tie it around the snowman's neck.
• 75. To make a small Christmas tree, you will need copper wire diameter 1.5 mm, Christmas tinsel, pliers and teip - tape Brown color. Make a loop at the end of the wire, insert the tip of the tinsel into it and squeeze the wire well with pliers.
• 76. Wind the tinsel on the wire, cut the desired length of the tinsel and fix the other end with glue.
• 77. top bend the wire with tinsel with a cone, and bite off the excess with pliers.

• 78. Bend the wire, as in the photo.
• 79. Wrap a straight section of teip with tape, thus obtaining a Christmas tree trunk.
• 80. Fasten the finished Christmas tree in a bag on the snowman's back. For the bag, cut a small circle of red fleece, gather its edge onto a thread and pull it off a little. Put a small piece of synthetic winterizer inside, inject hot glue from the gun into the same place and immediately insert the trunk of the Christmas tree. Let the glue cool. Then cut two thin strips of fleece for the straps, wrap them around the handles and fasten to your back. Glue a bag with a Christmas tree on top.
• 81. The snowman on skis is ready!
• 82. According to the same master class, you can make a snowman girl.

Thus, a wonderful appeared in your house new year friend made by hand.

A wonderful holiday is coming New Year, which means it's time to prepare New Year's Eve in advance Christmas decorations with your own hands. It is not necessary to buy special materials and tools for toys. Much can be found at home, as they say, "at hand." For example, old or new children's socks, stockings, tights are an excellent material for creating various toys. Let's try to make an original snowman out of tights with our own hands. Such a toy will never break, will not cause allergies, and will be made to your liking.

All we need is:

How to make a snowman out of tights, master class:

Prepare white tights or stockings. You can take worn ones, because the spots will be invisible, because we will dress the snowman, and the white part will be only on the face. For a finished snowman about 15 cm high, cut the workpiece 18-21 cm long.

Tie the end tightly with thread and turn inside out. If the front/back side of the fabric is not pronounced, then do not turn it inside out.

Pour barley or similar cereal into the resulting bag. Pour a little, then tamp to stretch the fabric, then backfill and tamp.

Tie the remaining “tail” tightly with a thread. Separate the body and head of the snowman, pulling it with a rope just above the middle.

For a sweater, take tights of a different color and use the "sock" part.

Dress the snowman in a sock, roll up the neck like a real sweater.

Sew on buttons.

Knit a miniature scarf or sew, or you can simply cut it out of a beautiful fabric. Fantasize!

For the snowman's hat, cut off about 13 cm from the tights, tie one end and tuck the other.

Sew with white thread eyes and nose - beads. Instead of beads, I’ll come up with buttons and buttons - invent yourself!

In a few minutes we did a great job. Christmas decoration with your own hands, it turned out great from socks under the Christmas tree! And do not forget to invite baby helpers to such work! The jointly made toy will become the most-most beloved! Create a New Year's fairy tale together!

Today another master class:

Would need:

- white nylon socks;

- a spool of white and red threads;

- bright sock for clothes;

- needle, hook;

- red threads for knitting;

- filler, for example, synthetic winterizer, you can cut an unnecessary children's jacket;

- red nose paper, super glue;

- buttons;

- satin ribbons;

- scissors;

- ready-made eyes, you can buy in needlework stores;

- a piece of cardboard for the stand.

Manufacturing:

Big snowman from a nylon sock in bright clothes

1. Cut off the edge of the sock, tighten the other edge with a thread. Inside we put a circle cut out of cardboard.

2. We fill the sock with filler, wrap the edge with a thread, tear off the thread.

3. We drag the body of the snowman in two places with a thread, tear off the thread.

4. Cut off the edge of the bright sock, tuck it, sew it with hidden stitches to the snowman's head. It turned out a hat, on the side you can glue the finished flower.

Glue the finished eyes, embroider the mouth with red threads. From a piece of red paper we fold a small cone for the spout, glue it. We apply blush on the cheeks.

We cut off a piece of the sock, put it on the body, sew the bottom with hidden stitches. We fix the waist and neck with satin ribbons.

We put a filler into a piece of nylon, wrap it with a thread, cut off the thread, we get a handle. Ready to sew the handles to the body of the snowman.

We glue or sew small buttons on the sweater of the toy.

A small snowman from a nylon sock in knitted clothes

1. We cut off a little more than half of the nylon sock, tighten the bottom, inside - a cardboard circle, stuff it with filler, tie it. We knit a scarf from red threads.

To do this, we knit 20 air loops, 2 loops for lifting, in each loop we knit a double crochet, fasten the thread, cut it off. It turned out a bright cute scarf, we tie it around the neck.

2. In order to knit a hat for a snowman, we knit 16 air loops, close in a circle, knit in a circle 2 rows with double crochets, at the beginning of each row 2 air loops for lifting.

3, 4 row - single crochet in every second loop of the base, tighten the remaining loops. it turned out a hat, we put it on the head of a snowman, you can sew it with hidden stitches so that it does not fall off.

3. Glue the eyes.

4. Glue the nose, draw the cheeks.

For handles made of narrow satin ribbon crochet 20 air loops. On the extreme air loops we knit 6-7 air loops with red yarn, we break the thread, we fix it. Fold the red mitten in half and sew with blind stitches. We sew the handles to the neck of the snowman, we tie a scarf on top.

A couple of snowmen near the Christmas tree

The long-awaited holiday is coming Christmas trees and bright lights, which means that it's time to please yourself and the kids with magical creativity. Nothing is more delightful than a miracle created by one's own hands. Especially if this miracle is made from old, unnecessary things with minimal time.

Material for making snowmen:

old white tights;
long white sock;
unnecessary socks (can be holey, but always striped!);
synthetic winterizer for filling;
a little rice cereal;
beads for the eyes, spout and buttons;
scissors and thread with a needle;
a box in which the craft will "live";
great mood and little helpers.

Stages of making crafts

1. We will cut off a suitable part from the tights without visible damage, holes, scuffs.

2. On one side of the segment, we tie an ordinary marine knot.

3. Fill the resulting bag with padding polyester or other suitable material. At the very end, add a little rice cereal for the stability of the toy.

4. The resulting snowman blank is securely sewn up from below. We put the snowman and check how stable it is.

5. It's the turn to put striped socks to work. We will cut off part of the strips together with an elastic band and tie it from the side of the cut with a rope previously cut off from the tights. The result is a cute striped hat.

6. Cut out a striped scarf from the remnants of the sock. It may not be wrapped. The protruding threads will give a special mood.

7. Putting a hat on the snowman, we will clearly see where the neck should be. We drag this place with a strip from pantyhose.

8. We tie a scarf around the snowman's neck.

9. Now you need to "revive" the craft. Sew on the bead eyes and nose. Let's not forget the buttons. If you make a similar toy for a child under three years old, it is advisable not to sew on beads. Eyes, nose and buttons can be embroidered with multi-colored threads.

10. By the same principle, we collect a baby snowman, only instead of tights it is better to take a long white sock.

Nylon tights are a very convenient material for needlework, from which you can make all kinds of things. Working with them does not require special skills and tools, just take scissors, a needle and thread. Many parents sew toys for their children on their own, because finished goods environmentally friendly and creative. A pair of worn-out tights can turn into an original shell, snake or mouse. Fantasize and fill the interior of the children's room with unique handmade toys.

Nylon tights shell for beginners

In order to make a soft shell with a pearl you will need:

• Nylon tights;
• Aluminum wire or copper (any section 2 - 3 mm, which bends easily);
• Needle with thread to match the color of tights;
• Sintepon;
• large bead;
• Ready-made eyes or cardboard with paints to make eyes yourself.

Next, you need to pull the sashes with a thread and, without breaking the thread, stretch it inward and fasten it. With the same thread, make a few stitches over the edge, thus imitating the outlines of a shell. Sew the product along the contour, slightly tightening.

shell from nylon tights

Snake from nylon tights. Master class with photo

If your child is very fond of animals, try sewing a fabulous snake for him out of old tights or stockings. Choose bright materials to make the toy fun.

materials:

• Colored tights;
• Acrylic paints;
• Foam rubber;
• Sintepon;
• Wire from 3 mm, flexible - 1 m;
• Needle and thread;
• Beads for eyes and necklace.

First, a wire frame is prepared. To do this, bend it with rings so that the contours of the snake are obtained.

Do-it-yourself mouse from nylon tights

Children love fairy-tale characters, so you can sew any nylon toy for them. The more different characters from cartoons or fairy tales a child has, the more interesting it will be for him to play.

Material:

• Tights, light and black - 2 pairs;
• Stuffing material (foam rubber or synthetic winterizer);
• Wire;
• Eyes.

The mouse is made without a frame. The filler is tightly stuffed into the stocking, and the toy itself is formed by stitches and tightening in the right places.

Sew a nose from black nylon and attach to the muzzle. Stitches form the cheeks. Separately stuff the handles, legs with filler, and then stitch the fingers and folds with stitches. You can make a forelock from pieces of a fur coat, and antennae from thin wires.

Watch the video: Nylon dolls. Mice

A minimum of materials and a little imagination, and toys from old nylon tights are ready. Do not rush to throw out torn things, because they can be used in needlework. Nylon toys out of stockings and tights will become creative for your loved ones, and also can be used for home theater or creativity in kindergarten.