Description

The arrangement of utilities and septic tanks in various sectors of the economy involves the use of special prefabricated wells that allow you to quickly put networks into operation. COP 10-9 - component designs. This reinforced concrete product is characterized by high strength and resistance to aggressive environments, which ensures its long service life in difficult conditions. Even taking into account the considerable weight (600 kg), the element is quickly mounted and provides ease of use of the well, and due to the optimal dimensions (outer diameter - 120 cm, height - 90 cm), its transportation is not difficult.

Product description

The wall ring of the well KS 10-9 is the main element of the design of the wells, which is used as the basis for the walls of underground wells of various communication networks and sewer septic tanks. Concrete rings are universal for the construction of the neck and shaft of the well, which are assembled by welding brackets.

Product marking

Like other reinforced concrete products, wall rings are marked with alphanumeric groups. The first group indicates the type of product, then (rounded to a whole number) indicate their inner diameter and height wall ring.

The second group carries additional information - special design characteristics ("a" - two holes for passing pipelines, "b" - four holes).

For an example of marking the wall ring of a well, consider KS 10-9a (1160x1000x890mm), where:

• KS (KC, K)the type of the element of the well is the wall ring;
• 10 - hole diameter;
• 9 - ring height;
• a- the presence of two holes.

Product types:

Rings are classified into ordinary and additional.

The diameter of the rings is: 70, 80, 100, 120, 150, 200, 250 centimeters.

Height ordinary rings: 30, 60, 90, 100

Height of additional rings: 10, 15, 20, 50

Underground utilities, as a rule, are long, and for their regulated or urgent maintenance, special access points are needed, which are wells. KS 10-9 is one of the constituent elements of this structure. With a length of 90 cm, the outer diameter of the well ring is 120 cm, the inner diameter is 100 cm, which guarantees ease of use of the finished structure. The product is made from heavy reinforced concrete according to state standards. Along with the highest strength, among its advantages are increased water resistance, resistance to temperature extremes and aggressive chemicals.

Question answer

- Shipping cost?
Delivery is calculated based on the remoteness of your object, from the warehouse, as well as the tonnage and dimensions of the products.

- Where are you taking it from?
Delivery is carried out directly from production. Production facilities are located throughout the central region, and before entering our network, it undergoes strict quality control by the legal, accounting and quality departments.

- Where is the post office?
For the convenience of users, we have made a system for distributing the load on managers, if mail is checked by 1 person, this significantly slows down work or even leads to the fact that read letters are lost. You can leave a request through the form at the top of the site “Leave a request”, it will go to a free manager and you will be called back within 5 minutes.

- Do you have a mobile number?
For the convenience of users, we have made a system for distributing the load on managers, if a mobile phone is specified, then only 1 person can talk on it, and it will be difficult to get through to him during the season.

- Why so expensive?
The price of a product consists of several components, the main of which is the cost of the material, which determines the quality of the final product. There is also a factory mark-up and a trading company mark-up, we work on the terms of a dealer discount, therefore we do not have a mark-up separate from the factory, we earn on the fact that the factory shares with us part of its profits, and we, in turn, provide the factory with volume to ensure uninterrupted operation .

- Why can't you order less than 15 thousand? Do you only work in wholesale?
Some items are made in nearby areas and the delivery of these items adds a significant cost to the product. We have calculated that when ordering more than 15 thousand, the benefit from purchasing products from us becomes greater. If you have a small request for products that are manufactured in your area, it will be cheaper to purchase products at the nearest factories. We unfortunately have this moment There is not a single plant in the Moscow region that has passed our quality control.

- Where can I pick it up?
The products are manufactured at different factories, the region and the city can tell you the manager, because the factory is different for each product.

- Why such an expensive delivery?
Delivery is calculated based on the distance of the object from the warehouse of the plant. The shipping cost is divided by the number of items based on the weight of the product, ordering 1 item, the entire shipping cost will fall on it, but if there are 10 items in the order, the shipping cost will be equally distributed among these 10 items.

- Do you work with VAT?
Yes, Beton Project LLC works for OSNO and is a VAT payer. All prices on the website are inclusive of VAT.

- Why is only the office listed on the site, and not the factory?
We are a dealer of factories and carry out our activities at the office address. Because in our list there is a solid number of plants that have passed our check, it is not rational to post all the addresses of plants with products in order to complicate the search for the right plant. If you are interested in where you can take out this or that product, you can always check with the Manager or use our delivery.

- Do you have a warehouse in Moscow?
We do not have a warehouse in Moscow or the Moscow region, because this will negatively affect the value of the goods, because it will entail additional costs.

- What kind of plant? What is the name of?
Products are manufactured at different factories, you can always come to the factory and see for yourself the quality of our products. Also, if you have any doubts, you can pay for the products directly to the factory.

Reinforced concrete rings KS 10-9 are used in the construction of wells. In the process of creating shafts for pipelines, sewers, cable networks, various risks arise associated with infiltration of groundwater, collapse or too much pressure of the soil, cracking of the structure under the influence of strong external loads, including vertical ones.

From concrete rings wells and other reinforced concrete products, a full-fledged mine is created - with a bottom, dense walls, and an upper floor slab. Our company manufactures and supplies such types of products.

Features of marking concrete rings

GOST establishes the rules for marking well rings, which must indicate their type, key characteristics. The marking is XXX-YY-ZZ, where YY indicates the internal section in dm, ZZ is the height, and XXX is the marking of a particular variety. Detailed breakdown in the table below:

Size range

Products made of concrete differ in the following ranges of basic characteristics:

• Height: 1-20 dm.
• Section: 7-20 dm.
• Wall thickness: 0.7-2 dm.
• Weight: 44-1470 kg.

Suitable well rings CS are selected for a specific type of work. Our website contains all the designations and characteristics of products.

Types and purpose of rings of wells KS 10-9

The choice of the size of well rings and their structure depends on their purpose. There are several main types:

• Wall. Are applied to construction of walls of mines under engineering communications. The surfaces and the edge are smooth, no additional lock is provided. Stacked on top of each other using special equipment. When installing, it is important to correctly combine them with each other, seal the seams, check the tightness of their contact.
• With a lock. Their design has a protrusion that allows you to increase the accuracy of docking and significantly improve the level of tightness of communication.
• Auxiliary. They differ in non-standard sizes and are made specifically to order. They are used when you need to get the height during the construction of a well, stormwater or other systems.
• With bottom. They solve the problem of sealing the bottom and eliminate the need to install an additional plate.

From above, the entire structure is covered with an overlap. It compensates for vertical loads and vibrations, the structure has openings for a maintenance hatch.

Production features

Wall reinforced concrete rings of wells are made from heavy concrete grade from M500 and above. Much attention is paid to the recipe - only purified water and well-sifted sand are used in the preparation. Plasticizers are added to increase frost resistance, water resistance.

Increased resistance to stress, cracking is achieved by using steel reinforcement, as well as aggregate - fine gravel. In production, vibrocompaction is used - this makes reinforced concrete products much stronger.

Installation, storage and transportation of well rings KS 10-9

Installation is carried out using special equipment. The design provides for metal brackets - hooks cling to them, and the ring moves to the installation site. If a lock is provided, the level of sealing increases. Workers monitor the correct alignment of the elements, and then coat the seams with mastics based on bitumen and other materials.

It is best to store concrete rings KS 10-9 in a dry room without strong exposure to high temperatures. They are installed on top of each other. Trucks are used for transportation. Unloading is carried out by a manipulator.

To buy KS well rings in Moscow, leave a request on our website or call. We supply goods from the manufacturer, without intermediary margins, with a guarantee of compliance with GOST and TU.

Description

The arrangement of utilities and septic tanks in various sectors of the economy involves the use of special prefabricated wells that allow you to quickly put networks into operation. KS 10-9h - an integral part of the design. This reinforced concrete product is characterized by high strength and resistance to aggressive environments, which ensures its long service life in difficult conditions. Even taking into account the considerable weight (600 kg), the element is quickly mounted and provides ease of use of the well, and due to the optimal dimensions (outer diameter - 120 cm, height - 90 cm), its transportation is not difficult.

Product description

The wall ring of a well with a quarter of KS 10-9h is the main element of the construction of wells, which is used as the basis for the walls of underground wells of various communication networks and sewer septic tanks. It differs from the usual wall ring in the presence of a seam connection, which allows you to securely fix the elements of the well, protecting them from horizontal displacement.

Product marking

Like other reinforced concrete products, wall rings are marked with alphanumeric groups. The first group indicates the type of product, then (rounded up to a whole number) indicate their inner diameter and the height of the wall ring.

The second group carries additional information - special design characteristics ("a" - two holes for passing pipelines, "b" - four holes).

For an example of marking the wall ring of a well, consider KS 10-9ch (1160x1000x890mm), where:

• KS (KC, K)the type of the element of the well is the wall ring;
• 10 - hole diameter;
• 9 - ring height;
• h-- the presence of a quarter (castle)

Product types:

Rings are classified into ordinary and additional.

The diameter of the rings is: 70, 80, 100, 120, 150, 200, 250 centimeters.

Height of regular rings: 30, 60, 90, 100

Height of additional rings: 10, 15, 20, 50

When laying engineering communications, it is important to organize convenient access to them for carrying out regulated work and urgent repairs if necessary. For this, special wells are being built that can withstand high mechanical loads and aggressive environmental influences. Well rings with a quarter are often used as the basis for prefabricated walls, for example, KS 10-9ch, which are very tightly fixed due to the geometry. These products are durable, tolerate difficult operating conditions and are quite easy to install, having exact dimensions that correspond to the current state standard: length - cm, outer diameter - 120 cm, inner - 100 cm.

Question answer

- Shipping cost?
Delivery is calculated based on the remoteness of your object, from the warehouse, as well as the tonnage and dimensions of the products.

- Where are you taking it from?
Delivery is carried out directly from production. Production facilities are located throughout the central region, and before entering our network, it undergoes strict quality control by the legal, accounting and quality departments.

- Where is the post office?
For the convenience of users, we have made a system for distributing the load on managers, if mail is checked by 1 person, this significantly slows down work or even leads to the fact that read letters are lost. You can leave a request through the form at the top of the site “Leave a request”, it will go to a free manager and you will be called back within 5 minutes.

- Do you have a mobile number?
For the convenience of users, we have made a system for distributing the load on managers, if a mobile phone is specified, then only 1 person can talk on it, and it will be difficult to get through to him during the season.

- Why so expensive?
The price of a product consists of several components, the main of which is the cost of the material, which determines the quality of the final product. There is also a factory mark-up and a trading company mark-up, we work on the terms of a dealer discount, therefore we do not have a mark-up separate from the factory, we earn on the fact that the factory shares with us part of its profits, and we, in turn, provide the factory with volume to ensure uninterrupted operation .

- Why can't you order less than 15 thousand? Do you only work in wholesale?
Some items are made in nearby areas and the delivery of these items adds a significant cost to the product. We have calculated that when ordering more than 15 thousand, the benefit from purchasing products from us becomes greater. If you have a small request for products that are manufactured in your area, it will be cheaper to purchase products at the nearest factories. Unfortunately, at the moment we do not have a single plant in the Moscow region that has passed our quality control.

- Where can I pick it up?
The products are manufactured at different factories, the region and the city can tell you the manager, because the factory is different for each product.

- Why such an expensive delivery?
Delivery is calculated based on the distance of the object from the warehouse of the plant. The shipping cost is divided by the number of items based on the weight of the product, ordering 1 item, the entire shipping cost will fall on it, but if there are 10 items in the order, the shipping cost will be equally distributed among these 10 items.

- Do you work with VAT?
Yes, Beton Project LLC works for OSNO and is a VAT payer. All prices on the website are inclusive of VAT.

- Why is only the office listed on the site, and not the factory?
We are a dealer of factories and carry out our activities at the office address. Because in our list there is a solid number of plants that have passed our check, it is not rational to post all the addresses of plants with products in order to complicate the search for the right plant. If you are interested in where you can take out this or that product, you can always check with the Manager or use our delivery.

- Do you have a warehouse in Moscow?
We do not have a warehouse in Moscow or the Moscow region, because this will negatively affect the value of the goods, because it will entail additional costs.

- What kind of plant? What is the name of?
Products are manufactured at different factories, you can always come to the factory and see for yourself the quality of our products. Also, if you have any doubts, you can pay for the products directly to the factory.

Well ring KS 10-9 it is used in private and industrial construction of wells, sewer systems, various inspection, drainage, gas communication networks. Due to high humidity, aggressive environment The ring KS 10-9 is made under strict quality control of GOST 8020-90 from heavy concrete grade not lower than B-15 by vibrocompression. The frame is made of steel reinforcement 6-10 mm thick, all embedded parts undergo preliminary anti-corrosion treatment. They are wall material for the construction of wells, underground sewer pipelines.

Specifications:

• Armature (steel) hardened class At-IIIC and At-IVC and A-I, A-II and A-III. All metal undergoes anti-corrosion treatment;
• used heavy concrete grades from M200 to M500, guaranteeing strength and crack resistance;
• Water resistance not less than W4;
• Frost resistance must be at least F400;
• The mass of KS 10-9 is 0.600 tons.

Wells are an essential part of the sewer system. Without them, it is impossible to inspect and maintain pipelines; they serve as a receiving device for wastewater.

The functional purpose of sewer wells is different, on this basis they can be divided into several large groups:

• revision (viewing) - with their help, the condition of sewer pipes is controlled;
• flushing - as the name implies, sewage is flushed through them;
• differential pipes serve as connecting links between pipes laid on terrain with difficult terrain;
• receiving (settling) - they accumulate, settling and clarification of wastewater;
• filters purify water before being released into the ground (if such an outlet is provided for by the sewer design);
• rotary allow you to mount the sewer line and bends and turns;
• nodal are the place of connection or suppression of several sewer pipes;
• straight-through are installed on a straight section of the highway.

In turn, direct-flow wells are divided into the following subspecies:

• linear connect an autonomous sewer with a central one;
• control allows you to monitor the level of sewage in some areas;
• flushing - straight sections of the sewer network are cleaned through them.

According to the type of effluent received, sewer wells are classified into industrial, storm, drainage and domestic. The material for the manufacture of sewer wells today is concrete (concrete rings), brick (brickwork), durable polymers (ready-made storage tanks for autonomous sewage).

Reinforced concrete wells include several elements: a bottom, rings, floor slabs and a road slab with a hole made in it, which closes the entire well directly at the surface. During installation, all components are connected into a single structure. Distinctive features of reinforced concrete wells are exceptional strength, long service life, ease of cleaning from any dirt and plaque. At the same time, the assembly process of such a structure is quite complicated and requires certain qualifications and the involvement of specialized equipment. Reinforced concrete wells are used in industrial and city sewers. The dimensions of the wells are standardized, and all their components are produced with certain parameters given in SNiP and GOSTs.

Installation of concrete wells

First you need to draw up a diagram of the entire sewer network and mark it on the ground. First of all, the place where the sewer pipe leaves the building is determined, and a sewerage plan is drawn up from it. In this case, you must follow several rules:

• the distance between the wells should be between 15 and 35 meters (depending on the sewerage scheme and the area adjacent to the building);
• the first well should be located 3-12 meters from the exit of the sewer pipe from the building;
• if the line is long enough, at least one manhole must be provided;
• if there are pipeline turns in the scheme, then a rotary well must be installed in these places;
• wells for filtration must be installed at a distance of at least 30 meters from residential buildings and water sources.

After marking the area at the locations of the wells, pits are dug, the sides of which are approximately 30 cm in each direction exceeding the dimensions of the wall rings. A reinforced concrete base is installed at the bottom of the well, while it should have a slope towards the hatch. Reinforced concrete rings are installed on top of each other on the base, which, for structural strength, are fastened with metal brackets at the points of contact, and the joints themselves are smeared with mortar.

Holes for pipes are cut out in the walls by a grinder, into which pipes are installed. If groundwater is present in the ground, then the joints from the inside and outside are sealed with special waterproofing compounds. At the final stage, the outer walls of the well are sprinkled, after which it is covered with soil up to the neck or a protective hatch.

Sewer wells need regular maintenance and cleaning, which is carried out in several ways:

• sludge machines;
• vacuum pumps;
• chemical treatment followed by washing;
• heat treatment (washing with boiling water);
• manual cleaning with scrapers and brushes.

City sewer or storm sewer wells need to be cleaned every 3-5 years, while industrial sewer wells, for example, need to be cleaned every six months or quarter (depending on the type and volume of production).

For right choice the type and material of the well, as well as its competent installation, it is necessary to clearly understand the purpose of the sewer system, know the features of the area in which it will be laid, and develop a detailed laying plan.