Those who are engaged in needlework know that needles and pins are lost all the time, crumble, or when working with them, you have to hold them with your hand, which is not very convenient. In order for these sharp objects to always be at hand, you need to have a needle bar. And so that she can decorate any interior with herself, you can make it yourself. We bring to your attention a do-it-yourself needle hat. Sewing it is quite simple, and you will always find the material for manufacturing.

Work materials

Dream up and come up with any kind of hat or find a photo on the Internet. Here are photos of hats in the form of a men's bowler hat or flirty veils. With your own hands you can make an object useful and beautiful. As a gift, this is simply an irreplaceable thing - your hand cut the material, cut it, sewed it, you put a piece of your warmth into it.

The do-it-yourself needle bar hat is the basis on which the bowler hat is sewn. For work you will need:

• fabric, any piece will do, there are also no restrictions on quality: chintz, synthetics, tapestry, wool;
• filler, foam rubber, synthetic winterizer, holofiber, cotton wool are useful;
• one CD, you can use a deodorant cap;
• decor, it can be braid, ribbon, lace.

Do-it-yourself master class on making a hat needle bar

The photo shows a satin hat with a rose. You can get your own version, and then you can share the same photo with your friends.

1. In order to sew a hat, we first make 2 patterns. They will be round. The size of the larger piece depends on the base, in our case it is a CD, which means with a radius of 10 cm. For a bowler hat, cut out twice the diameter of the cap minus a couple of centimeters.
2. On the wrong side of the base we put the disk and collect the fabric along the edge. To do this, you need a needle and thread. We tighten and fasten the thread well. Straighten the folds that have turned out. They should be approximately the same, as shown in the photo. In this case, the hat will turn out beautiful and neat.
3. Now you need a pattern of a smaller diameter, on its wrong side we put a cap, in which the filler was previously placed. There is a little secret here. The place where the needles will be stuck should be covered with material, and where the hard edge is, pull the fabric with a thread. Straighten the folds as well.
4. Now our hat should take on a real look. We connect the parts, carefully sewing them together with a hidden seam.
5. To make the hat look attractive, as in the photo, we suggest making your own decorative option. The hat can be decorated with ribbon, lace, flower, braid or sequins.

Manifest your Creative skills, and you will get an original pincushion hat that will decorate every home.

If you need to make your own small, but pleasant and useful souvenir, a perfect option is a pincushion-hat. It is easy to make it with your own hands. Even a child can handle this job. The product is perfect as a souvenir for mom or grandmother on March 8th. This thing can be made both at home on your own, and used as a task for technology or artistic skill and needlework at school or a specialized circle.

Manufacturing methods

It can be done in different ways. Use whichever method you like:

1. According to the pattern using cardboard circles.
2. Without templates, but with a ready-made base in the form of a circle (disk) for the margins and a plastic jar for the top (tulle).

In the first case, you do not have to draw details on paper, transfer them to fabric, but, on the other hand, you need to find the appropriate blanks. The downside is that you are limited by the size of the prepared base, such as the diameter of the CD.

In the second case, you can make a hat of any size and proportion. The only limit will be your imagination. But here you have to build a pattern with a compass and transfer it to the material, as well as independently make a base from cardboard.

What materials and tools to prepare

In order for you to get beautiful, you need to prepare the following:

• Textile.
• Scissors.
• Threads.
• Needle.
• Filler.
• Ribbon, braid, lace and other decor.

The rest of the accessories should be chosen depending on the method by which you will make a souvenir. If you need to draw a pattern, then you have to take a sheet of paper, a compass and a pencil. In the case of working with a finished base, you will need to find the workpiece itself (disk and jar). Whichever option you decide to use, nothing complicated and expensive is needed. All items can be found in every home.

It is worth remembering that it is better not to use foam rubber as a filler, since the needles in it quickly rust. Take holofiber, synthetic winterizer or the remnants of matter.

Do-it-yourself pincushion hat: master class

Let's analyze the simplest option, when not patterns are used, but blanks. For fields, look for a circle. The easiest way is to use an unnecessary computer disk. For the crown, take a plastic rounded jar.

The sequence of actions will be as follows:

1. Cut out two circles from the same fabric, such as fleece.
2. Glue the synthetic winterizer onto the disk.
3. On the wrong side of the fabric circle, place a disk with padding polyester (filler up).
4. Collect the edges of the material remaining outside the workpiece on a thread.
5. Cut off the bottom of the plastic jar and place the workpiece on the second circle of fabric;
6. Collect the fabric also on a thread.
7. Fill through the hole with stuffing material.
8. sew on upper part to the bottom.
9. Decorate the joint with tape or something else.

So, you have a beautiful do-it-yourself pincushion hat. The master class allows you to understand how easy it is to make such a souvenir. It is worth noting that the sizes of the circles are cut in accordance with the blanks that you found, with the addition of assembly allowances (about two centimeters each).

Symmetrical and asymmetrical

Do-it-yourself needle bed "Hat" can be made not only by different sewing methods, but also by several models. If you have opted for a product in which crowns and fields will be present, it is not difficult to arrange them relative to each other in two versions:

1. Strictly centered.
2. With offset.

In the first case, you will get a traditional hat, in the second - a model resembling a beach summer version when a visor is made that covers the face from the sun. Both models, even made from the same material, will look different. So if you like to experiment, try all the ideas.

Do-it-yourself needle bed: patterns

A hat is the easiest and safest option for such a functional item. It is easy to sew this souvenir without a template at all. It is enough just to cut out a circle according to the shape of a workpiece, for example, a CD, from which a three-dimensional thing will be formed in the future due to assembly. This option has been discussed step by step above.

If you want to sew the brim and tulle from several multi-colored parts, it is better to first draw patterns on paper. The basis will again be circles, and then divide them into the required number of elements of any size and shape.

The third option, when you definitely cannot do without a pattern, is the formation of the volumetric part of the hat not with the help of assembly on a thread, but with the use of several elements (from two, to six or eight).

Each detail will look like a petal cut off from one edge. For this option, it is better to take finished pattern, although it is possible to build it yourself if you have not found a sample with the right amount of parts or their proportions.

Exquisite mini beret

To make a do-it-yourself needle bed (hat) quickly, make it borderless. In this case, you will need to cut out two circles of the same diameter from cardboard. One will be used as the base-frame of the beret hat itself, and the second is used to close the assembly (thread tie) of the upper part. The principle of operation will correspond to that according to which the hat with fields was made, only here the lower part will be the same diameter as the upper one. The decorative "bottom" is easier and faster to sew on than the brim.

Difficult option

When you have enough time and you know how to sew, a beautiful do-it-yourself needle bed is obtained by making a hat, in which the crown is made of separate parts resembling petals in shape.

Usually the upper part of the product is made of six elements. They can be cut from the same material, but the alternation of contrasting tones or simply different shades looks much more impressive.

The principle of operation in this case will be as follows:

1. Cut out the detail of the crown from paper.
2. Cut out three petals from two types of fabric.
3. Start stitching consecutively adjacent on the wrong side. Use machine stitch or hand stitch.
4. Turn the product on the face, put the filler.
5. Margins or just the basis ( lower part) perform in any way that was described above.

How to decorate the product

So, you have learned how to make a do-it-yourself pincushion hat in several ways. Appearance souvenir depends not only on the method of sewing, but also on the decorative elements used. The combination of different and decorations will allow you to create a spectacular gift that will be not only functional, but also very beautiful.

The easiest way to decorate is to take a contrasting shade and sew at the junction of two elements (tulle and fields). On the one hand, this will close the junction of parts, on the other hand, it will decorate the craft. If you have a piece of ribbon or lace that is the right size, use that.

In the case when the length of the ribbon allows, tie a simple bow, leaving two hanging ends, or make a spectacular large bow from several loops and a decorative element in the middle.

You can use any available material (a flower from a hairpin or made using the kanzashi or beading technique, beads.

If you want to create a truly masterpiece, try using more than just braid or lace. Decorate the base itself, that is, the fabric. Firstly, it is easy to decorate it with the same beads, ribbons or floss. Secondly, you can make a blank using the patchwork technique. In this case, you will use the base pattern in the form of a circle, that is, you do not have to sew the petals together, creating a three-dimensional shape.

It will be enough to cut the paper blank into several parts, dividing the circle in any direction, of course, so that it looks harmonious and beautiful. Cut out the details from different patches. In this case, it is better to use shades that are close in shade, rather than contrasting tones. Sew all the elements into the plane of the circle. You can use decorative stitching on the front side or decorate the seams with an additional pattern, such as beaded embroidery. Fields, by the way, are easy to do in the same way. Receipt spectacular gift you are guaranteed.

As you can see, a do-it-yourself needle hat is made simply and quickly. All materials used are available and easy to process. Enough basic skills to work with fabric and a needle and thread. If you choose a beautiful material and decor, the souvenir will turn out great.

The needle case looks very nice in the form of a hat, which can be made from small pieces of fabric, and it takes very little time to make it. Beads, ribbons, feathers, brooch, flowers, lace, braid, fringe, etc. can be used as decorations. Such a needle will be a good gift relatives and friends, and your creativity will be appreciated! Let's make it ourselves!

Materials:fabric, damaged disc (can be cardboard), synthetic winterizer, satin ribbon 40 cm, threads in color, needle, scissors, iron.

Do-it-yourself needle bed "Hat", step-by-step master class:

1. We cut out two circles from the fabric, on one making allowances of 6 cm from the disk, on the other - allowances of 2 cm. We sew each circle along the edge with a running stitch, do not cut the threads. We put a disk in the first circle - it is the bottom of the cap.

2. We spread the synthetic winterizer on a large circle (on a disk), slightly pull the thread.

3. Evenly distributing the folds, pull the seam. We fasten the thread and cut it off. The bottom of the hat is ready.

4. We slightly collect the second circle, pulling the thread, fill it with padding polyester.

5. We tighten the seam, giving a rounded shape to the part. We fix the thread, but do not cut it. We got the top of the hat.

6. We sew both parts together.

7. The seam turned out to be nondescript, so you need to mask it. We use a satin ribbon, fixing it in a circle at the seam. Let's make a bow, the middle of which can also be decorated.

8. The hat is ready. But, we also decorated it with decorative roses, which were made of fabric. Agree, very beautiful!

9. To make a rose, you need a fabric strip 3 * 20 cm in size. We fold the strip along the length in half with the wrong side inward, iron it.

10. We bend inward the upper corner of the fabric strip, fix it with stitches.

11. Fold the bottom corner inside the fabric strip. After making a few turns, fasten with a thread.

12. We turn the fabric strip into a tube, while creating folds that look like petals. If necessary, we fix their position with a thread.

13. Hide the tip of the strip to the bottom of the flower. To get the base of the rose, we make a few stitches, cut the thread.

Neonila Berdnikova

I decided to prepare an unusual holiday for Mother's Day. Something like Parade hats". The question arose about a surprise gift for moms. We decided that if the theme of the holiday is "twisted" on hats, then the gift should look like hat.

I rummaged through the Internet and found interesting needle caps. We tried to do it. The result exceeded our expectations! I hasten to share with you, my dear, a master class on making such a needle bed. suddenly, someone will come in handy!

For such a needle bed, you need simple improvised materials and very little time.

We'll need: thick cardboard for the base, synthetic winterizer, fabric trimmings, lace, artificial flowers, ribbons, etc. (in short, everything that is available) for decoration.

Glue a synthetic winterizer onto a cut out circle of cardboard (or you can use thin foam rubber)

Cutting a circle out of fabric

and pull the thread.

Cut out another circle of fabric, put a piece of foam roller in the center of the circle,

and also pull on a thread. I have such rollers - the bases of paintings for diamond embroidery are wound on them. You can use any other material, for example, cut it out of a sponge, stuff a cardboard tube with padding polyester, etc. Everyone can use what is at hand. The main thing is that the needles fit tightly and hold well.

It turned out two details of the future hats - crowns and fields.

We connect them together with a hidden seam.

Basis for hats ready! Now let your imagination run wild! Use whatever is at hand!

These hats I did for a sample. preparatory group, with which we are preparing the holiday, made the needle beds even better and more interesting! The teacher prepared the bases for the needle beds, and the children themselves sewed flowers from satin ribbons for decoration hats glued them on. I wish you all the best in your creative endeavours!

Related publications:

I bring to your attention a master class on making a globe with your own hands. Of course, every child will not be able to do such a job. Can.

Do-it-yourself postcard for May 9. I propose to make carnations from napkins, colored cardboard and paper. Feature - the division of the flower into.

Dear colleagues, I bring to your attention a master class on making Easter souvenirs. Look what a miracle Mom put.

Adults love to receive gifts made by children, they bring them great joy. For our mothers, the guys and I decided to make.

A master class on making a hat - a needle case as a gift to mothers and grandmothers by March 8! Purpose Educational - the formation of special.

I offer a master class for those who like to make unusual gifts with children on March 8. Making such a hat does not take much time.

MK for the manufacture of a hat-headband, hat-hairpins Author: Educator of the Omsk region “Krasnoyarsk special (correctional) general education.

In the 19th century, a women's hat gained the peak of popularity, every fashionista had all kinds of styles and models. Hats were decorated with silk ribbons, ostrich feathers, fur, precious stones. Women usually did not even leave their room without headdresses. And to appear in public or go out into the street without a hat was considered bad form. We stock up on ribbons, beads, lace, feathers and enter the role of a "modiste" - a hat maker. Let's plunge into the atmosphere of past centuries and make a do-it-yourself “Hat” needle bed, an assistant from discs, yarn, fabric and other material.

Pincushion panama

For manufacturing you will need:

• the cloth;
• threads;
• CD-ROM;
• ribbons, lace and so on - for decoration;
• filler;
• cardboard (3 cm wide, 21 cm long) for the form, but not necessary;
• glue gun (optional)
• needle;
• scissors.

Let's start our master class. Step 1. We draw two circles on the cardboard, 19 cm and 13 cm. Then we apply the cardboard patterns to the fabric, circle with chalk (soap) and get two parts from the fabric.

Step 2. We take a large circle, sweep along the edge, indent from the edge we make about one centimeter. It is not necessary to fasten the thread, leave the tail about ten centimeters. We put the disk on the fabric and tighten the thread so that the disk remains inside the fabric, tie a knot. You can use thick cardboard instead of a disk.

Step 3. In the second circle, which is smaller, we also make a basting along the edge. We make a ring from a cardboard strip, the easiest way is to fasten it with a stapler. We put a ring and filler into the blank from the fabric. Cardboard will help to shape the hat, but if it is not there, then you can do without it. We finish the upper part of the hat, tightly tighten the fabric and completely sew up the hole.

Step 4. We glue the top of the hat, the crown, on the glue gun to the bottom, for reliability it is better to sew it with threads.

Step 5. Let's start decorating our hat. We close the seam line with lace, and tie a ribbon on top. We make a rose satin ribbon, or we take the finished one and sew it to the resulting headdress. It turned out to be a cute needle!

Knitted panama

Now let's look at how to crochet a needle hat.

To make it, you will need some bright yarn, as well as filler and braid for decoration. Yarn can be taken from two, three colors, design to your taste.

The hat is knitted in the round. We start knitting from five to six air loops. Then we connect the resulting chain into a circle. To do this, insert the hook into the first air loop, grab the working thread and drag it through the loop on the hook.

We make one air loop and then we make single crochets. We introduce the hook into the middle of the ring, grab the thread and pull it out of the circle. Two loops remain on the hook, and again grab the thread and pull it through the loop. It turns out a single crochet. We knit a circle of the desired diameter. Increases are made first in each loop, then through one and through two.

After the desired diameter is obtained, we knit a panama deep into. We knit loops without a crochet evenly in each line.

We stuff the "pouch" that we have obtained with synthetic winterizer or foam rubber. Again we knit a circle, in diameter as the main product, and connect it with the crown of the hat. Example in the photo:

The hat must have a brim. Hat fields are made with double crochets. You choose the width of the fields yourself. We make one air loop, then insert the hook into the first single crochet, pull out the working thread and knit the first single crochet. In the same first column, we again insert the hook and knit the second column without a crochet. In the next column we knit one column without an increase, and so on we will alternate the number of columns one or two. And so we knit to the end of the row.

If you want to make a panama hat multi-colored, then take a thread of a different color, tie it to the base and thread it through the lifting air loop, thus closing the row. Next, we make an air lift loop and knit one single crochet into each previous loop of the row. We knit the columns to the end of the row, we perform a connecting loop.

For convenience, you can make a loop on the needle bar so that you can hang it somewhere. We make several air loops (the number depends on the size of the loop). Next, we make a connecting column twice, now you can cut the thread.

We take a ribbon or braid and decorate it, the resulting hat. You can tie the ribbon for decoration yourself.

If there is a desire to make openwork fields at panama, you can focus on these schemes: