Modern fashion proclaims well-groomed men the standard of beauty, regardless of the stylistic design of the image. Based on this, many representatives of the stronger sex are actively trying to change their appearance. Its changes directly depend on the condition of the hairline on the head. Sometimes you need to cut a little, and sometimes a new haircut is a dramatic change in the image of a person. It is not always possible to set aside time for a visit to the hairdresser. In certain cases, it is easier to cut yourself. This can be done with a typewriter, without spending a lot of time and effort on this process.

Instructions

First step What needs to be done is to decide on a hairstyle model. There are two main options: for one nozzle and cascading with a transition. To make a regular haircut, you need to use only one nozzle, if a cascading one - 2 or more.

Before you cut yourself with a typewriter, you need to do it well. comb your hair with a fine comb.

The tool must be taken in working hand, if a man is left-handed, then he should hold the device with his left hand.

You need to start cutting your hair yourself from the back., bending your head slightly forward. This must be done in order to smooth out small folds and irregularities on the scalp, and the nozzle is in close contact with the hairline. This will ensure that there are no small gaps and protruding hair.

The movements of the machine should be smooth, without sudden jerks and turns.... It must be clearly understood that the movements should be directed against hair growth. It is necessary to walk on the trimmed section of the hairline with the machine again, so the haircut will be of better quality. From time to time it is recommended to comb the hair on the head to identify problem areas where the level is not even.

On the back of the head you need make a straight line and then remove the nozzle and shave the fluff on the neck... A razor can also be used to carry out this process.

After finishing processing the back of the head with a typewriter, you need to go to the temporal zone, and then to the crown and front.

You need to be careful at the temples, because around the ears you will need to make an even edging so as not to ruin the whole haircut. For this, it is advisable to use a mirror.

If the hair is too long, then first it is cut with the largest attachment, and only then the finish is leveled.

After the mission is completed, you need to use the cloth brush yourself from small hairs, so that they then do not inject and do not cause discomfort.

Care for trimmed curls

Any hairdressing procedure entails a stressful situation for the hair and scalp. When the strands become too short, the scalp's vulnerability is significantly increased, which opens up to the adverse influences of the external environment.

In order to increase the natural protective properties of the dermis of the head and prevent the occurrence of unwanted diseases, it is necessary to use nutritional cosmetics for the scalp. It is recommended to apply nourishing and moisturizing shampoos, and sometimes apply burdock or Castor oil in the form of a mask.

• The device must always be stored correctly in accordance with the manufacturer's recommendations.
• Before using the device, it is necessary to check its serviceability and cleanliness. If there is contamination, you need to clean it. It is worth remembering that you need to clean the blades after each use with a brush, which is almost always included with the tool.
• Before you start cutting, the blades are lubricated with special oil, and the device itself is turned on for a few minutes of idle operation for more effective lubrication.
• You can clean the device from dust particles accumulated there using a regular hair dryer.

Doing your own haircut is not a time consuming and complicated process. To perform this procedure, you need a desire to achieve a certain result, as well as the implementation of the above recommendations. This will provide an excellent opportunity to constantly have a well-groomed scalp.

After the decision was made to have a haircut only at home, all the necessary equipment was purchased and even the first victim for an experienced haircut was found, a logical question arises - how to cut with a machine so that the home-grown hairdresser is not conspicuous? Or how to cut yourself without fresh scars?

How to choose a hair clipper

Any simple or fashionable men's haircut starts with buying a typewriter. It seems like a common truth, but in reality, it is easy to get lost in the world of hair clippers - there are so many models in each row. The division of all devices into three main types according to the principle of operation will help to understand the assortment.

Vibrating machines

This type of device belongs to the most economical and noisy. In addition to the soundtrack, a small power - up to 15 watts and a short duration of continuous operation - up to 20 minutes will pay off for a small cost. At the same time, the hair clipper will independently tell when it gets tired, simply by turning off. For these reasons, experts will not cut hair with a machine of this rank, and by the end of the day the hand would be tired of the strong vibration that distinguishes such a device.

There is also a reason that clipping with a clipper at home with an economical appliance can be disappointing - these are fixed knives that are difficult to care for. Among the more expensive models of this series, there are semi-professional successful options, like the Oster 616, which solved this problem easily and gracefully.

Rotary hair clippers

Cutting with a rotary clipper is more pleasant due to the reduced vibration background, and a strong motor ensures uninterrupted operation of the device for more than one hour. The device is convenient for both specialists and beginners, it hardly vibrates in the hand, but it weighs much more than a vibration one.

Complete with the model and separately, there is a large number of attachments with which any men's hairstyles are formed. Hair density and stiffness do not matter - any men's haircuts with this type of clipper turn out equally well.

Cordless hair clippers

One of the lightest and fastest devices and, of course, it costs accordingly. In addition, the power of such models is carried out both through the battery and through the network - a great advantage with a painstaking men's haircut with a clipper, especially for a beginner. The knives in the device change at the speed required by professionals, and the weight of the device - within 150 grams - makes it a toy compared to previous categories. You can cut, trim your hair with this battery mechanism both for yourself and for any other person.

What you need to know when starting a haircut

To start a career as a master of men's haircuts with a machine at home, it is better to form the most elementary models - boxing or semi-boxing. The schemes of both models are characteristic of a sporty style, that is, they imply a shortened back of the head and temples and an elongated crown. How to cut correctly, you can understand only by grasping the essence of what should be the result, and this requires not a single haircut for a typewriter.

When cutting a man with a typewriter in the absence of experience, there is no need to rush and strive to start the device, as soon as the "client" takes a chair. Perhaps before that, your counterpart had a model haircut and to redo this beauty, you first have to use scissors. The following is a fairly complete step-by-step instruction, for those who do not agree to be able to cut only bald.

Men's haircut step by step

The simplest men's haircuts for a typewriter begin with removing the excess length and only then - from work, directly, with the device. Step by step instructions steps, how to cut a man, as follows:

Using a razor after the clipper is finished is the final touch of the process, but this stage of trimming is required only if the hairline at the back of the head falls too low on the neck and it does not look aesthetically pleasing. Take a simple disposable machine and baldly remove the ugly growing hairs and stiff stubble below the border of the haircut.

How to cut your own hair with a clipper

How to cut yourself if you cannot turn to outside help, but you have a typewriter and a desire to learn how to do without a hairdresser? If you have not yet decided on a hairstyle, remember that the boxing half-boxing for most males is a men's haircut with a machine, contraindicated for bright representatives of a blond who have short haircuts will create the feeling of bald people and those who have focal thinning of the hair on their heads. The latter category of men is often advised to either grow their hair to a classic length, or shave their head baldly.

So, step-by-step instructions for those who cut their hair on their own:

• Wash your hair and dry it well. Strands middle length you also need to comb it well;
• If you have already had the opportunity to cut a man's hair with a typewriter, then it will not be difficult to transfer the same actions to yourself. First, prepare the appliance by putting on the knife that matches the desired length of the bangs hair. Then sit near the dressing table with a mirror and immediately prepare a second mirror on a stand, so that later it will be convenient to trim yourself with a machine from the back of the head;
• Try even with long hair ah, to do without scissors - it is inconvenient for self-haircuts. In extreme cases, if the technician fails, and the device cannot remove the required length in one go, first arrange the hairstyle on the maximum nozzle, and only then adjust the desired length;
• Bring the device with the attached attachment to the roots from the side of the bangs and, moving the device towards the crown, lay the first track along the central device, without deviating to the right or left side. The following paths will pass alternately to each ear, adhering to the angle of inclination of the knife, at which the nozzle is constantly in close contact with the head;
• You can trim yourself with a machine on the back of your head with the help of a second, smaller mirror, into which you need to look in such a way as to constantly see the entire back of your head and neck in the main mirror. Do not try to immediately organize smooth transitions, endlessly changing the length attachments - work with a small knife on the back of the head to the edging, give the desired length to the hairs on the temples and around the ears, and only then, using knife # 2 or # 3, soften the borders of the transitions wherever necessary.

Important! It is advisable, at the final stage, when a razor is applied and the neck space under the back of the head is outlined baldly, to seek the help of a third person.

How many times a month should a child, boy, boyfriend be cut?

1-2 or maybe 3? But every trip to the hairdresser is money, time and nerves.

The boy does not want to go to the hairdresser for a haircut and cannot be persuaded by any promises. Often, 2 hours of time and a bunch of your and the hairdresser's nerves are killed, but there is no result.

And the family decides that they need to look for another way out - this is the purchase of scissors or a typewriter.

When purchasing a hair clipper, parents think about saving time and money, as well as the nerves and practicality of acquiring this miracle of technology. Later, trying to cut the boy's hair with her, a lot of other difficulties are revealed.

How to seat a child so that he can sit quietly for 20-30 minutes.
Where to plant so that it is clearly visible and easy to cut?
How to cut to get a beautiful haircut?
How to start a haircut for beginners?

All these questions soon begin to worry the mother, as she begins to make attempts to cut the baby's hair.

Let's analyze practical experience mom's son. This article is for those who have never cut their hair, but want to learn how to cut their men: a child, boyfriend, husband with their own hands at home using a typewriter and or scissors.

How to cut a baby boy's hair at home with a clipper, scissors instructions for beginners?

For the child to sit quietly and not run away anywhere, there are 2 options, they are not the best for the eyes, but reliable.
- watch cartoons, make sure that there is a distance of at least a meter to the monitor or TV;
- play on your tablet or phone.

So the child will sit for 20 minutes, and during this time you need to make a haircut.

More suitable ideas are puzzles, crosswords, board games, but not requiring constant monitoring of the field where everything is happening, reading books or listening to audio stories.

Perfect for a boy: "Deniskin's stories", "Vitya Maleev at school and at home", Nosov's stories or stories about Dunno. Finding audio with high-quality voice acting on the Internet is a must.

And also toys anti-stress cats, pandas from a ball and starch can help out.

Important before starting a haircut

1. We put the child on a high chair, preferably with a back, otherwise the baby will get tired quickly and will slouch.
2. The height of the chair should be such that the baby's head is at the level of your hands.
3. The maximum amount of light at the window, so that it falls from all sides or illuminated with lamps, or ask him to turn to the light with the right side.
4. Read the article to the end first and practice on a more persistent model. for a child, you have a maximum of 15 minutes.

How to start a haircut for beginners?

If you've never cut a hair men's haircut, practice, but only after our little training course on an adult guy or a man. In this case, the person will sit patiently, which is extremely difficult with a child.

Prepare your tool:

• a typewriter;
• nozzles;
• comb;
• scissors;
• sheet;
• chair;
• spray with water if the haircut will be with scissors;
• hairdryer;
• mirror.

Make room for a chair. Make sure the wire from the clipper can easily reach the chair and also allow you to move around it.

Consider where you will have your tools so that you do not have to run to another room, place a chair or an additional table so that you can easily reach them.

The water in the baby spray should be warm. The prepared cape completely covers the child so that the hair does not get on the hands or feet.

In the process of cutting, if the light cannot be adjusted evenly, turn the boy to the light with the right side, asking him to turn so that he is more comfortable sitting on the chair, undress him to his panties, and put a towel on the chair itself.

After a haircut in the shower, it will help get rid of the remaining hair and they will not bite and prick him.

Do not rub off or sweep your bobbed hair out of the way for an even more stingy sensation.

What you need to know before cutting your hair?

A haircut consists of several stages:

• The main haircut by zones, shading - mixing.

  Each zone is approximately equal in height to the width of the machine blade, i.e. attach the side of the machine over the ear - this is the height of the temporal zone. Help yourself with a typewriter if you are worried that the zone will turn out to be uneven.

  In this case, the options for parting can be both horizontal, vertical, and at an angle.

• Edging.
• Examination.

Description of the whole process

After choosing the first haircut, trim your man with 1 attachment the entire head from the back of the head to the crown, for example 12 mm. When you finish this stage, you need to smooth the transition lines by making them shorter at the temples and at the back of the head.

To do this, change the nozzle by 1 number less and cut from the back of the head to the protrusion on the back of the head, take the next nozzle and cut it from the back of the head by 3-5 mm with a number 3 mm less.

There are transitions or shading, as well as the area above the ears and edging. This is just a description of the entire process, which we will discuss further in detail and step by step.

How should the car go?

The machine goes easily in a straight line without sticking to the head and without making a rounding, with light sliding movements from bottom to top. In this case, the movement goes in a straight line, with a guy pulling towards itself - this allows you to make the transitions smoother.

In this case, the fit does not go with the tip of the machine, but with the place where the cut will take place, i.e. the entire nozzle, passing the entire strand through the nozzle.

How to hold a typewriter?

Think about where it will turn on so that it can easily reach your model.

Hold the clipper so that only your hand is movable, and not your whole arm, because otherwise it will tire you quickly.

Try what works best for you? Keep tightly clasping and putting your index finger on it or otherwise, find the most comfortable position.

How to hold a typewriter correctly according to Pavel Bazhenov, a master of hairdressing:

2nd video

How to cut and with what attachment?

The attachments we use go from largest to smallest. Behind the nozzle, not only the number is written, but also the length that it cuts in the photo - 1.

Start with the largest and work your way to the smallest length, i.e. from 12 mm to 3.

If you cut without a nozzle, it will turn out bald or toe.

An important nuance, the handle, which is on the side of the machine 2 in the photo, pushes the blade back, which allows you to save another 0.5 cm in length, a very necessary regulator for beginners, so as not to cut off the excess.

Move the lever and watch how the machine behaves, you will see the blade extend or retract, use this mechanism to experiment.

What other gadgets and secrets do you need?

Video lesson on hairstyling a boy, a guy at home with a typewriter:

What do you need: machine, attachments, comb, chair, mirror, scissors, drape or sheet.

The simplest haircut with a clipper, for beginners who cut for the first time.

Before starting a haircut, read the article and watch all the videos, this will help you understand how to set the clipper, how to move it and what result you will get in the end.

We always work from the largest tip to the smallest one so that mistakes can be corrected.

We cut with a clipper on dry hair.

Clipper instructions:

So that you understand which zone is being cut, look at the photo, here on the mannequin all hair is divided into 3 zones.
But since we are working with beginners, this theoretical course is for those who have completed at least 1 haircut and the rest can skip and move on.

We divide the haircut into 3 parts, each part is equal to the width of the machine in height, the blade.

• The zone from the edge of growth to the protruding bone is the width of the machine, put it sideways and you will understand how wide it will turn out.
• The area above the ears and gripping the back of the head, also the width of the machine.
• Upper from temples to crown.
  It is important to understand and see when cutting, each zone, starting from the bottom, is cut with a change in the attachment one less, namely:
• -1 - 3 mm
• -2 - 6 mm
• -3 to 9 mm or more.

To get your bearings, hold the comb and help yourself to keep a straight line in height.

Why is this?

To understand, when you master the first basics, deal with zones, places of transition from one zone to another, and also master shading and transitions - this information will help you know the dimensions.

For newbies:

We cut everything with a 12mm nozzle:

We lead leaning against the head in a smooth line, without pressure and jerks. Gently brought the nozzle into the hair from hair growth and brought it up, slightly pushing it towards ourselves, we lead in a straight line up.

Important: the entire plane of the nozzle leans against the head.

1. Make sure that the wire does not fall on your face to do this, put it on your hand or just move it away. So we go through the whole head.
2. When the main part of the hair has been removed and you have drawn each line from the edge several times, check for antennae - these are separately protruding hairs that have not been cut. To do this, constantly comb the client. Walk over the head again, cutting the antennas.
3. If you see that there are places where the hair is growing at an angle, comb again and go exactly these places against the growth of the hair, at an angle. This is required to trim the temporal area or at the base of the skull.
4. The simpler the haircut and the sooner it ends, the better.

   If your child has never had a haircut before, play hairdresser. Trim a couple of pretend dolls or other animals. Let the kid be the hairdresser.

How to cut a man's haircut with a clipper step by step video with training instructions from a hairdresser:

Part 2


5. Then remove the nozzle and make the edging, for the more experienced we go through the lowest zone with a height of 3 mm, the middle one - 6 mm.

The edging is done like this:

Video tutorial on trimming edging:

Whiskey

• It is necessary to make the shape of the temples, a corner, beveled or straight, lean against an inverted machine - it will be straight, or at the desired angle. We do the same for a guy or a man.
• Comb the haircut thoroughly, check if there are any antennas left. If the client requires a shorter one, walk again with the smaller nozzle.

For beginners, that's all.

• For the more experienced who have mastered the zones, it is necessary to make shading at the transition points with the help of thinning scissors. If there are none at home, then leave it unreported.

It is important to place the comb correctly when shading, and also to move only bottom scissors. Move the comb from the bottom slightly upward, with a brace towards you. Repeat information in each place.

Shading

A carcass is a transition from longer hair to short, the smoother it is, the more neat and well-groomed the haircut looks. It is made with ordinary scissors or thinning, and can be done with a typewriter.

When performing shading, it is important to correctly place the comb to the child's head at an angle, and not lean and slowly lead, while cutting off those hairs that fall on the edge of the comb.

Shading at home with ordinary scissors, training lesson:

Video how the shading is performed:

Going from 0 and beyond

Haircut with scissors

You need: scissors, clipper, comb, spray with water.

For a haircut with scissors, it is important to moisten the hair; for a simple haircut, select 1 control strand in the crown of the head and cut all the hair along it.

• We move from the crown of the head in a circle, take thin strands with a brace, when choosing strands, our hand rests on the client's head, and the palm itself slightly moves away from the head.
• We cut, each time grabbing the trimmed strand and a new one in order to level it according to the standard. You can cut with an even cut, perpendicular to the selected strand, or you can cut it with teeth. Straight cuts can also be made with a typewriter if you don't have scissors, but you have a typewriter.
• So we move from the top of the head to the area above the ears.
• If you have a clipper and plan to trim the back of your head with it, then select the desired nozzle number, for example 6 mm, and treat the area above the ears and the back of the head to the lower occipital area.
• We recall 3 zones and work out the middle zone and then the lower one.

  It remains to do mixing and shading, as well as edging and whiskey using a typewriter as described above.

• We check our work, take any strand and pull the next one to it, visually look at there are no protruding hairs.

The haircut is ready.

Video tutorial on how to cut a boy's hair at home:

Children's haircut

How to cut other haircuts?

With one-sided extension on the bangs:

Bangs, rules for haircuts in short hairstyles:

How to cut a spider web for a boy?

Video on a boy's haircut with scissors:

Educational video without words, the master shows everything on the model:

Now you have already mastered the minimum set of methods and knowledge for cutting your son, boyfriend or husband, now only practice and the more there is, the faster you will bring your skills to perfection.

We wish you good luck and inspiration! You will definitely succeed!

Leave your comment

Few representatives of the stronger sex visit the hairdresser with pleasure. Fortunately, they can also opt for home hair care: clippers for men are currently available thanks to wide range and the prevalence of such devices.

Choosing a clipper

For home use it is better to purchase a vibration (if your budget is limited) or rotary machine. The vibration device has a number of disadvantages (noise, low power, etc.), the main one of which is that it turns off after 20 minutes of continuous cutting.

The rotary machine with two speeds is more reliable and convenient. The low speed will allow you to clear difficult areas. Such a machine is suitable for hair of varying degrees of density and stiffness, with its help, with a certain skill, you can perform almost all male model haircuts - from classic to youth.

Information for the home hairdresser

Before getting started, there are some theoretical issues worth getting to know. This includes, for example, dividing the head into zones such as:

• parietal;
• two temporo-lateral;
• superior occipital;
• lower occipital.

When trimming each of these areas, consider the direction of hair growth.

Hair should be washed, dried and combed thoroughly before cutting. If you have never done men's haircuts for a typewriter at home, follow these recommendations (and do not forget to watch the video posted after the article).

• Hair should be cut against its growth.
• Start any men's haircut from the back of the head.
• Move the clipper smoothly, without sudden movements.
• Use a fine-toothed comb to trim individual strands.
• After finishing your haircut, do not forget about the edging, which is made on the other side of the clipper without a nozzle.

The best models for a hair clipper

For a non-professional just starting to use a clipper, men's haircuts without length transitions are ideal.

To perform the simplest model, select the nozzle (it is better to give preference to the largest one, so that later there will be an opportunity to correct the shortcomings) and process all the above zones one by one - from the back of the head to the temporo-lateral and parietal areas.

Simple haircut with length transition

Many model men's haircuts are distinguished by smooth or deliberately sharp transitions in hair length. If you've never used a typewriter before, start with the smooth transition option. When doing this, observe the following rules.

1. With the help of a 9 mm nozzle, the occipital zone is processed (in the direction first to the temples, then to the crown). We must strive to cover as much area as possible in one movement.
2. Hair on the crown zone is removed with an 11 or 12 mm nozzle, without a firm hold on the head.
3. The edging is made with one of the smaller attachments.

Common short mens haircut boxing belongs to the category of universal (it can be called youth, and at the same time it is worn by men of respectable age), so it is worth learning how to perform it at home. You will need 1.5 and 3 mm attachments.

1. Hair on the top of the head is cut using the “on the toes” method.
2. The occipital and temporo-lateral regions are removed to the desired height.
3. To make the length transition less pronounced, the haircut is corrected with scissors.

For such male model as a semi-box, a 4 mm nozzle is used.

The difference between this haircut and the previous one is that the length transition must necessarily be smooth. In addition, the hedgehog looks perfect only on thick and coarse hair. This men's haircut is performed according to the following scheme.

1. The hair on the top of the head is cut “on the toes”, keeping the length up to 4 cm.
2. With the help of wax and a hair dryer, the hair on the treated crown area is styled so that it stands upright.
3. The temporal-lateral zones and the back of the head are treated with a typewriter in strips that are on top of each other.
4. In the neck area, the hair should fade smoothly.

You can learn how to operate a hair clipper not only for the sake of saving time and money, but also then to learn the intricacies of hairdressing from the inside. Then in any salon you will be able to distinguish an average master from a real professional.

Perhaps not every man visits a hairdresser, preferring to carry out all the procedures at home on his own. Well, or with the help of his wife, for example. In turn, the girls are wondering how to cut a man with a typewriter so that he likes it and has it to taste. There are several simple tips to help with this problem.

How to cut a man with a typewriter. General rules

First of all, figure out what kind of tool you will have to use. See what modes are available on the machine, what attachments. Be sure to make sure that the tool head is well lubricated with special oil. Otherwise, the hair clipper will rip, not cut. Which is clearly not to your client's taste.

Remember: the original length of the hair plays a huge role. As well as the desired result. Discuss in advance both the final length of the haircut and bangs (or its complete absence), and whether the hairstyle is meant for transitions, or whether it will be "under one nozzle." All these key points will significantly save time in the process, as well as the nerves after the haircut. So, before you cut a man with a machine, discuss all your questions.

If he has long hair

No electric hairdressing tool is able to cut very long lengths. Therefore, if your man has an idea to radically change his hairstyle, prepare scissors for a start. They must be sharp. Buying a professional tool for this, by the way, is not at all necessary, because in the end the hair will be cut with a machine. However, the sharpness of the scissors should not be in doubt, so as not to tear or tug at the hairs.

Spray your hair lightly with water, comb through with a medium-toothed comb. Use scissors to remove the length so that it can be "gripped" by the largest attachment of the machine. Do not touch the bangs, it is better to cut it off at the last moment. If you are wondering how to cut a man with a typewriter at home, you can spy on the technology in the salon or watch training materials for novice male craftsmen. This is a last resort if you are not at all confident in your own abilities. But, most likely, this will not be needed, since there is nothing complicated in this process.

After the length is removed, you can start cutting with the attachments. Pay attention to where and which one will be used. It is better to start from the back of the head and move to the top of the head, since this is the easiest area to fill your hand. You need to cut from the bottom up. Do not ignore the top of the head. Trim it against the direction of hair growth so you don't miss a thing.

Haircut of the temples

When the excess hair is removed from the back, proceed to the sides. The temples are usually trimmed with a shallower nozzle, gently passing the area behind the ears. Be careful not to leave extra hair. Let it be necessary to spend one more time with a typewriter, but the haircut will come out even. To minimize the transitions between the attachments, hold the instrument at a slight angle and not close to your head. After the temples, you can immediately cut off the excess hair on the back of the neck, if this was originally intended. Be sure to brush off any hairs when changing attachments. First, it will extend the life of the tool. Secondly, the haircut will be smoother and smoother.

Bang. How to cut it?

There are three options: do not touch at all, use scissors, use the same machine. If everything is more or less simple with the first two, then the last one needs to be dealt with. When wondering how to cut a man's bangs with a typewriter, remember the golden rule: it is better to use a large attachment first than to cut everything to zero. Hold the instrument at a 45 degree angle for more comfort. If initially the bangs are too large, then remove the length with scissors, and then grab the machine. Move it smoothly and carefully, slightly thinning the bangs.

End of haircut

Are you done? Take a close look at the result. Are there any missing hairs, is there nothing sticking out? If not, remove the attachment and without it, make the edging, leveling the haircut. How to cut a man with a clipper if there are not enough skills? Follow this simple instruction. You will succeed. If this is your first haircut, then ask how the man had his hair cut in the salon before, where did they start and how they ended. Be careful. A tool without a tip is sharp and can cut. For example, the ear. Or the skin behind the ears.

To know how to properly cut a man with a clipper, it is enough to try once. The most important thing is to choose a good tool. For example, Thick hair it is impossible to cut with a machine with low power. But such devices are indispensable when cutting children, whose hairs are still thin and light. Too powerful devices are better left for professionals in their field. Even the most budgetary one does their job well at home. And justifies the cost to itself in just a few months with regular use.