Abroad, it is quite popular to use letters in interior design, which can be hung on ribbons, placed on shelves, etc. You can also add names or any phrases from them, or you can randomly “scatter” them on the wall to decipher anagrams. V Lately such volumetric letters began to use for photo shoots and decoration festive hall. Today we offer you to make such letters yourself from an unnecessary cardboard box.

To make volumetric letters you will need:

Corrugated cardboard (you can use an old box);
- design paper;
- regular and double-sided tape;
- ruler, pencil, cutter;
- marking board;
- decorative elements (ribbon, rhinestones, buttons, etc.).

Volumetric letters from cardboard step by step:

Take a cardboard sheet and draw a simple letter on it, without roundness. Then cut out the letter with scissors/paper cutter in duplicate (Pic 1). The cut out letter will look like in photo 2.

Make sides on one letter, for which cut strips of cardboard about 7 cm wide and as long as possible. Cut them into pieces so that it is enough for the entire perimeter of the letter. Bend 2 cm allowances on both sides and glue to these allowances along a strip of double-sided tape. Then glue the resulting "sides" to the part of the "letter" (photo 3).

Glue the second to the sides cardboard letter and press firmly, but be careful not to bend the corrugated board (photo 4-5). From above, you can fix it with strips of double-sided tape (photo 6).

Start decorating the letter. Trace it onto the design paper and roughly figure out how to cut out to cover the letter on all sides (its entire surface). The wrapper for the letter may not work the first time - it's okay, try again (Pic 7-9).

V kindergarten announced a craft contest, the theme of the letter is their own hands. What can be used to make a craft letter so that it is not quite banal and that the child participates by 90%?

I remembered the positive impressions of crafts from the base for toilet paper, very easy to perform and looks finished. Thanks to my imagination, I realized that the material is grateful in terms of design qualities and due to the presence capital letter"K" in the name of the child decided to do this particular letter.

For the effect of softness, they took kitchen napkins made of viscose among the people of RAG for decoration, for decoration, ribbons and flowers cut out with a hole punch. The flowers were cut out of broken wings from a doll, the plastic turned out to be thick for a hole puncher, but we did it.

Materials used:

1. Toilet paper cylinder (tubes) - 7 pcs.

2. Viscose cloth - 1 pc.

3. A4 paper ( plain paper for the printer) - 2 pcs.

4. PVA glue.

5. Glue brush.

6. Glue "liquid nails".

7. Cotton buds - a few pcs.

8. Scissors.

9. Decorative elements - ribbons, flowers, glitter glue, soft colored wire.

To begin with, I drew a sketch, discussed the stages of work with my daughter, and briefly told what my idea was. Katyusha agreed and we started with enthusiasm.

Following the sketch, three bases go to the vertical leg of the letter, and two to the rest. Separately, we fasten three tubes with A4 paper and two more tubes each with A4 halves. This is all for the strength of the structure, we apply PVA glue evenly over the entire surface of the paper, then “twist the sausage”, if the paper protrudes slightly beyond the edges, we cut it off or bend it inside the cylinder.

There is no need to wait for the glue to dry for a long time, because. during the process of gluing the cloth, the cylinders will in any case pick up moisture. Immediately wrapped in fabric, the principle is the same as with paper. We evenly apply glue, “twist the sausage”, cut off the excess. The format of the rags should be slightly larger than A4, try on and cut out, taking into account a slight overlap.

You can immediately apply the first decorative element with glitter glue, you can take several colors.

Next, we glued pieces of fabric of a different color on the inner surface of the resulting tubes, this made it possible to hide the ugly end of the cut and emphasized the concave part. Now I understand that it was possible to solve this problem in another, easier way. Those extra edges that we cut off could be tucked inward. We glue on the triple part on both sides, on the double part on one.

Now the most interesting and responsible. From the form of simple cylinders we turnour feet in elegant boots. From those sides where there is fabric on the inside.

1) make tucks on both sides, flattening the cylinder from above

2) make smooth folds along the edges (depth about 2 cm)

3) we bend a piece of fabric and fix it with “liquid nails” glue, for accuracy, cut the sharp corners with scissors.

We bend the remaining ends without fabric and without boots a little differently, forming the letter “K”, apply “liquid nails” glue to these folds and fix in turn, first the lower part of the letter, after the upper one. At the same time, we put the letter in a vertical position and check its stability.

At this stage, we are waiting for the glue to be 100% fixed, everything is according to the instructions.

Let's get to the fun part, decorating. Here you can completely surrender to fantasy, use any available tricks. The legs of our letter were tied with a brown ribbon, fixing the ends, and flowers were glued on top in a free order. Katyusha and I also decided to make a crown for our letter, especially since the crown also begins with the letter “K” using soft wire. Without the help of parents, of course, this is not possible.

The letter is done! Hooray! We're done!

A little later, another idea came to my mind that the emptiness of the cylinders could also be somehow used, and we poured beans into the vertical part! Now our letter has acquired an additional function, now our letter is Rattle.

It seems to me that using this method, you can perform any letter of the alphabet.

Thanks everyone!

Volumetric letters have long been popular in home decor, at photo shoots, they are given and used as wedding decorations. If you decide to make them yourself, in this master class, I will show you one of the ways to make volumetric letters from cardboard with your own hands.

Do-it-yourself volumetric letters - materials and tools

For such letters, not very dense corrugated cardboard is well suited. Such cardboard is usually used for the manufacture of various boxes and for packaging. It holds its shape well and is easy to cut. You also shouldn't throw out paper towel (or toilet paper) tubes, although they can be replaced (wine corks, for example).

So, to make three-dimensional letters from cardboard, we need:

• Cardboard
• Scissors
• PVA glue
• White paper
• Pencil
• Tubes from paper towels
• Ruler
• Paints
• Tassel.

Volumetric letters made of cardboard - the progress of work

I decided to make the first English letters of my name and the name of my husband out of cardboard. And of course, nowhere without an ampersand. Let's get started.

1. Draw or print the desired size letter somewhere on A4 and cut it out.

2. We circle the letter and cut it out of cardboard in 2 copies.

3. Cut out a strip of paper about 2x cm wide. In general, the width depends on how voluminous your letter will be. If you are making really huge letters, you can use plastic or paper disposable cups.

4. We take a tube from paper towels, apply a strip to its edge and circle it with a pencil to make a ring 2 cm wide. Depending on the size of the letter, we need about 6 such rings.

5. Cut out the rings with scissors or a paper cutter.

6. We distribute the rings one by one of their letters. It is they who will give us the volume we need and fasten the halves of cardboard.

7. Warm up hot melt adhesive. We smear one of the sides of each ring and glue it to the letter.

8. Now we spread the upper sides of the rings and cover them with the second half of the letter. You need to do this quickly and carefully so that it turns out smoothly. Press the workpiece a little from above so that the glue grabs well.

9. Now we remember a little white paper, cut it into small strips and glue the sides of the letter.

10. As a result, the entire letter should be covered with a thick layer of paper. When the glue dries and hardens, you will get a fairly solid construction.

11. It remains only to paint our letters with acrylic paint. Acrylic paints densely cover many surfaces and are distinguished by good moisture resistance. I covered the initials with white paint, and the ampersand with rich coral.

So you can make any letters to make names or words from them. They won't take too long, but it's not the best either. fast way. One letter took me about 30-40 minutes.

Successful creativity!

A room decorated with voluminous inscriptions, letters or numbers will always look very stylish and impressive. It can be a love confession for the second half, a decorative element for wedding photo shoot, solemn date or age of the birthday man.

Many novice craftsmen have a question: how to make three-dimensional letters from cardboard? There are many various ways making this accessory.

The first way to make the base

First of all, you need to prepare a stencil of the selected number, letter, or the whole inscription. You can take it ready-made from the Internet, or you can draw it yourself. For beginners in this business, it is recommended to use the simplest template without curls - it will be much easier to work this way.

As for the sizes of three-dimensional letters made of cardboard, they can be very different. These can be very tiny items or large ones that can be mounted on a wall or placed on the floor. The most popular is the size of about half a meter high.

After the stencil is ready, it is transferred to cardboard, and then carefully cut out along the contour. The material for the base is recommended to take the most dense. For example, you can use an unnecessary box from household appliances.

Then you need to take the thread bright colors and wrap them around the craft very tightly. Experienced craftswomen recommend taking threads from synthetics. It will be much easier and more pleasant for a beginner to work with such material.

The basis for a three-dimensional letter or number is ready, it remains only to decorate it. Here the imagination of the master is boundless.

Second way

There are more difficult option making this accessory. For work you will need the following materials and tools:

1. Cardboard (packaging from household appliances or ordinary corrugated cardboard).
2. Double-sided tape.
3. adhesive tape.
4. Sharp knife.
5. Ruler and pencil.

Before you make three-dimensional letters from cardboard, you should prepare a template. Having decided on the desired style and size, the letters should be drawn on cardboard, and then cut along the contour with a sharp knife. It is worth remembering that for work you will need two blanks for each letter.

The next step is to measure the length of each side of the perimeter piece. Now make the sides. For example, if you plan to make a workpiece seven centimeters thick, then you need to cut a strip nine centimeters wide from cardboard, leaving some distance for bending. Passes must be carefully bent and glued to the workpiece with adhesive tape. Thus, a three-dimensional letter or number is formed. To make the parts more resistant to external influences, it is recommended to carefully glue them

Third way

The most common way to make three-dimensional letters from cardboard is to make them using paper rings. To do this, prepare the following:

1. Thick cardboard.
2. Toilet paper or paper towel roll.
3. Pencil.
4. Scissors.
5. Paper.
6. Glue.

First of all, the conceived letter or number must be transferred to cardboard. If you can’t draw the blank, it’s okay, you can use a ready-made stencil. Below are examples of do-it-yourself volumetric letter templates made of cardboard.

You just need to print the stencil you like, transfer it to cardboard in duplicate and carefully cut it out.

Then you should think about how large the letter will be. If it is supposed to make a workpiece with a volume of three centimeters, then rings of the appropriate thickness must be cut out of the sleeve. There should be about seven such details. The wider the thickness of the rings, the larger the letter will be.

Details must be applied to one letter and secured with glue. When everything is ready, you need to grease the other edge of the rings with glue and glue them to the second part of the letter. The resulting workpiece should be left for several hours until completely dry.

The next step is to tear the paper into small pieces and mix with glue. Paste the entire letter with such a mass. Thus, the product will become more durable and solid.

Do-it-yourself volumetric letter made of cardboard is ready, it remains only to decorate it.

Craft decoration options

There are many ways to decorate volumetric figures and letters. Considering the general style of decoration of the celebration, you can choose the most suitable decoration option:

1. Twine.
2. Colored paper.
3. Floral film.
4. Multicolored napkins.

Decoration with twine

Eco-style - interior design, which involves the use of natural materials. Such a stylish decor item will be a three-dimensional inscription, decorated with twine. It is not difficult to make it, it is enough to stock up on a bit of patience.

To begin with, the cardboard blank must be greased with glue, and then carefully wrap the outline of each letter with twine. The material can be left unpainted or painted in any color you like. And it is also allowed to decorate with any small things at hand: buttons, beads, beads or decorative feathers.

paper roses

Flowers made from corrugated paper They look very elegant and delicate. Particularly impressive are obtained with the effect of mother-of-pearl or metallic.

To create a bud, a square piece with a side of approximately seven centimeters should be cut out of paper. Then draw a spiral inside this blank and cut it along the contour. Do not be afraid to make small irregularities, this will give the flower splendor and originality.

The edges of the resulting spiral must be connected by first placing any solid object on them. When the bud folds, this item will be in the middle. The bottom edge of the workpiece should be fixed with glue so that the flower does not fall apart. Other flowers are made according to the same principle.

For one letter, you will need about 65 of these buds. When everything is ready, the cardboard base must be greased with glue and decorated with the resulting paper roses.

Funtiks from a floristic film

Many people ask themselves: how to make three-dimensional letters from cardboard with pounds? Such a product looks very beautiful, elegant and elegant - everything you need for a memorable holiday.

Funtiki can be easily made from floral film. To do this, the material should be cut into several square blanks. The parts should be folded unevenly in half, and then in half again and again unevenly. You should get a part with protruding edges on the sides.

The resulting pound must be fixed with glue or a stapler exactly in the middle. By the same principle, you can make other parts, and then paste over the cardboard base of letters or numbers with them.

Napkin flowers

Volumetric letters made of cardboard and napkins are perfect as decor for a wedding photo shoot.

Such jewelry always looks very gentle and airy.

To make a fluffy flower, you need to fold the napkin four times. The resulting workpiece must be fixed in the center with glue. Then cut the part so that you get a circle. Carefully cut through the edges, not reaching the center. Twist the leaves of the flower a little and lift up. In this way, airy flowers are created, with which you can then decorate the letters with glue.

Crafts made from this material are very beautiful and unusual. Photos of volumetric letters made of cardboard and napkins are given in this article.

In which the banquet and the actual celebration will take place. Have you rented a small, cozy cafe for this purpose? Then it is simply necessary to hang an appropriate inscription above the entrance so that the guests do not get lost, and the people passing by know: there is now a wedding here!

large styrofoam letters for wedding

How to make volume letters from polystyrene with your own hands?

• We draw letters on a pre-prepared foam using a regular ruler and a black marker and carefully cut them out with a sharp knife. Nuance: if you buy it (styrofoam, not a knife) specifically for this purpose, and do not use packaging material from equipment that has accumulated over the years in the attic, make sure that the width of the sheet matches the expected width of the letters: this will simplify the finish;

Stencil cut out letters from styrofoam

• We carefully clean the blanks, first with a large sandpaper, and then with a small one. Our task is to get as smooth a surface as possible;

Ready-made blanks of foam letters can be pasted over with paper or newspaper

• Now we beautifully color the resulting letters and leave them to dry. For this purpose, you can use bright colors, varnish, or you can paste over them with a film, both with a pattern and plain. Here, in fact, is all the wisdom!

Styrofoam letters in red as wedding decor

Illuminated 3D Styrofoam Letters

Want to make your styrofoam letters glow? It's easy to do it yourself!

Make a border with the usual thin garland that decorates Christmas trees on New Year. It can be simply glued around the perimeter with pieces of adhesive tape. Depending on its length and the size of the letters, you may need several of these garlands.

Make sure that there is an outlet nearby, and do not connect them into one, as self-confident craftsmen sometimes do.

There is a reason for this: if suddenly something happens to one light bulb in the process, then not the entire inscription will go out, but only one or two letters, it will be easier to eliminate the trouble. And the probability that it will go out, the less, the less you "chemically" do anything with it.

And it will be even easier to purchase an LED strip of the appropriate length in advance. Then the process of making three-dimensional foam letters with your own hands will be even easier and faster!

Production of three-dimensional letters from polystyrene foam using polyurethane foam

Here are the initial options:

• a) We make “molds” from cardboard into which we will “blow” the foam. We fill them with foam, wait until it hardens, and then take it out. If you filled it slowly, then there will be no voids and irregularities inside, and only one edge will need to be processed;
• b) Very large letters can simply be blown more or less evenly onto sheets of paper by placing cellophane on them (just cut a few bags). And you don't have to mess around with forms. The disadvantage of this method is that the subsequent processing of the resulting blanks will take almost more time than the manufacture of molds.

The further technique corresponds to how we worked with ordinary foam: with a sharp knife we ​​cut off the excess foam, carefully clean the bumps, paint, decorate.

Nuance: did the three-dimensional foam letters come out with holes? The effect of "Swiss cheese" can be removed with the help of ordinary mass for wall putty.

3D Styrofoam Letters with Silver Decoration for Wedding

What else besides three-dimensional foam letters?

With this simple method, you can make almost any foam shape, not just letters. They are definitely planning for a wedding. Prepare in advance for them some toys as prizes!

Instead of cardboard molds, you can also use silicone molds in which soap and homemade cookies are made. Color the blanks brighter, varnish them, draw funny faces.

Volumetric letters with decor in red

You can glue buttons, pebbles and shells, make eyes and a nose from pre-painted peas, buckwheat and semolina (semolina will have to be painted directly on the product). Guests will be delighted!

How to fix three-dimensional foam letters

Lightweight and easy to handle, they are attached very simply: using mounting glue or double-sided tape. Using adhesive tape, practice in advance: some of its types are glued only to a smooth surface. You polished the letters, but the walls are often rough.