Old nylon tights can not be thrown away. They make beautiful rugs, planters and even dolls.

Nylon tights are a wardrobe essential. modern woman. They are comfortable, pleasant to the body and sometimes crazy beautiful. But tights have one huge minus: no matter how high-quality and expensive they are, sooner or later they will still break. By the way, sometimes it happens in the most inopportune place at the most inopportune time. Disorder and only - an expensive and time to fall in love with a thing needs to be thrown away ...

If necessary? Craftsmen know how to give tights a second life by turning them into useful items household items, exquisite interior decorations and even cute dolls.

How can you use old tights?

If the tights are torn, let the arrows go, they can be successfully used in the dacha and household in a variety of ways.

1. As a cloth for wiping dust, shoes, removing animal hair from clothes. It is very good to clean glossy surfaces, glass, tiles with pantyhose
2. Not a broom as a cover so that it does not pour straw
3. Storage for onions and garlic
4. Like a vacuum cleaner attachment. If some small and necessary thing so that she is found, but she is not sucked into the vacuum cleaner, you can pull a piece of nylon fabric on it, which will act as a catcher
5. Like tow for window insulation. Foam rubber, which is often used to plug gaps in windows that have not been replaced with metal-plastic ones, soon begins to rot or crumble. Rolled tights hold heat well, do not fade and can last for years.
6. For painting surfaces. If the paint in the jar came in lumps, or rubbish got there, it can be saved. All this heterogeneity will remain inside if you put cans on the neck nylon tights. They will miss the paint, but not rubbish. Also, coloring can be done by the tights themselves, then the texture at the surface will turn out to be very interesting.
7. Make a sieve. Through it, you can sift flour, drain pasta, squeeze cottage cheese. Tights are even used for brewing tea so that the tea leaves do not fall into portioned cups. Through a sieve of pantyhose, you can also filter a solution of whitewash chalk, wallpaper paste, etc.
8. Tie up the tomatoes. Summer residents have long been used to using tights in such an unusual way. They are cut into strips, which subsequently play the role of strong and elastic ropes.
9. As patches for mosquito nets or instead of mosquito nets in general
10. Like chops. If the socket for the screw needs to be strengthened, the chop is not at hand, you can insert a nylon flap into the hole made in the surface and melt it. The screw will hold up perfectly

With old nylon tights, you can call up tomatoes.

Nozzle for a vacuum cleaner from old tights.

Bow net made from old tights.

IMPORTANT: It is obvious that recycled nylon tights must be clean. They need to be washed with powder at least. For some types of needlework, they are even boiled

If there is imagination and desire, there is no need to rush to throw away old, tattered nylon tights. They make very beautiful interior items, such as:

• decorative pillows
• pots
• rugs
• covers for furniture
• decorative bottles ladies
• lampshades for lamps
• half pens for pens and pencils
• butterflies
• baskets for sewing, toys, other household items
• photo frames

Decorative bottle from old tights.

Rug from old tights.

Butterflies from old tights.

Pillow toy made from old tights.

A flower from old tights.

Lampshade from old tights.

Cape on a chair from old tights.

Dress made from old tights.

Toy box made from old tights.

IMPORTANT: The fantasy of a needlewoman can go so far that an elegant cocktail dress will turn out of old tights

VIDEO: Flowers from nylon tights

Do-it-yourself dolls from nylon tights? Step-by-step instruction

dolls from old nylon tights and stockings are called stockings. They serve as an interior decoration, a talisman of housing (we are talking about cute little houses). Children also play with stocking dolls. In order to make such a charm, you need only basic sewing skills. Workshops with photos and videos will help beginner puppet masters.

The first thing to start with is to choose the type of stocking doll. There are:

1. Frame stocking dolls. From nylon, fillers and a dense frame (it can be made of cardboard, wire, foam, etc.) a toy is made with all parts of the body, which can even be movable. Frame dolls most often made for children
2. Dolls with a soft body. They come out like regular soft toys.
3. Doll head. Sometimes she is with her hands, in a magnificent dress. Such dolls are hung on the walls
4. Dolls-priests. They differ in that they have expressive faces and ... sirloin. Priests are designed to express the mood of their owner. If he is in the spirit - the doll looks at the guest with a pretty face, if not - he turns his fifth point to everyone

Stocking doll with a box.

Stocking doll on a pillow.

Wall stocking dolls.

Stylish stocking doll.

Doll - popik.

Stocking doll little mermaid.

• nylon tights
• scissors
• threads
• PVA glue or silicone in a gun
• frame (cardboard, wire, plastic bottle, etc.)
• stuffing (cotton wool, synthetic winterizer)
• fabric for tailoring
• decor for clothes (rhinestones, ribbons, lace, etc.)
• paints, cosmetics, brushes, toothpicks for painting the doll face

most simple doll from kapron you can do this:

1. The frame of the doll can be twisted from wire. You need to remember how in childhood they made wire men, make one, and already put on it the details of the toy from the stocking
2. The head is made first. To do this, stuffing is placed in the stocking, a ball is formed required size, knotted. Cut off the rest of the stocking. In place of the knot, you can make a seam, then the pupa will turn out to be more accurate. Leave a window for the wire frame
3. The doll's face is created with the help of stitches, with which the nylon is pulled together in the right places. This is how eyebrows, nose, nasolabial folds, lips and chin are obtained. Next, she gets her makeup done. The eyes of the doll can be drawn or sewn ready
4. The body of the doll is made simple, oval. If there is a desire, the chest, navel, ass are also made with the help of stitches
5. I want to make my hands beautiful, with fingers and even nails. On the legs, the feet can be drawn in the same way
6. Doll parts are put on the frame and sewn to the body
7. You can dream up with hair by making them from threads, synthetic fibers, etc.
8. Doll clothes and accessories are made

IMPORTANT: To get a doll with a natural complexion, it is not enough to choose flesh-colored tights. They need to be boiled using a special technology.

VIDEO: Master class kapron doll Splyushka

How to boil tights for making a stocking doll?

Puppet masters advise to give nylon a natural flesh color by boiling with a chlorine-containing agent. Such in stores household chemicals in bulk. But on needlework forums they say that some spoil the material itself, others make its color faded or dead.

• bleach ace
• Domestos
• Comet with chlorinol

The procedure itself is carried out in this way:

1. It is necessary to boil 1 liter of water in an enamel pan
2. About 20 ml of chlorine solution is added to it.
3. In a boiling solution, pantyhose are boiled for at least a quarter of an hour, stirring occasionally with a wooden spatula
4. Boiled bleached tights are rinsed and soaked in cold water with fabric softener for another 15 minutes

How to make doll hands out of tights?

The hands of a stocking doll can be soft, in which the fingers are marked with seams, but they turn out to be interconnected. In order for the hand to be complete, a frame is made for each of the fingers.

1. The frame is twisted from wire - a loop for each finger
2. For each finger, cut a strip of padding polyester, wrap it tightly around the frame
3. The palm is also stuffed
4. The capron is pulled onto the hoop, the base of the doll handle is applied to it, the outline is drawn, and a small allowance for the seam is left.
5. Cut handles from nylon in two copies
6. Pull the nylon over the frame of the handle and carefully sew it
7. Attach the doll's hand to the forearm. If the forearm and hand have one frame, the whole arm is attached to the body

Outlining the contours of the hand on capron.

Hand stitching.

How to sew a monkey out of tights?

Hosiery monkey doll is a symbol of the year and just a cute toy for children. She is made like an anthropomorphic doll.

1. Making a wire frame
2. Wrap the frame with double-sided adhesive tape, then the synthetic winterizer will stick to it well
3. Wrap the frame with synthetic winterizer, fix it with thread winding
4. According to the instructions above, monkey handles are made
5. They form the head of a monkey, draw her face with stitches
6. Shape the body of the toy
7. Connect body parts together
8. Sewing clothes for the monkey

Monkey frame.

Monkey stuffing.

Making a monkey face. Monkey from old tights.

IMPORTANT: If desired, you can use fur to make the monkey fur

How to make a brownie from nylon tights

They say that the figures of brownies, like the mystical creatures themselves, bring comfort and warmth to the home, protect it from fires, thefts, and other misfortunes, and contribute to the establishment of warm relations between family members. Brownie is easy to make from old nylon tights.

Stocking doll brownie Kuzya.

Funny brownie made of kapron.

Brownie-amulet from old tights.

VIDEO: Doll from tights "Domovikha"

How to make a blanket for a cat from pantyhose?

A blanket for a cat is by no means an ornament or a mockery of an animal, as many might think. It is extremely necessary for the animal in the postoperative period. Depending on what the operation was, what kind of seam and what it was made of, the veterinarian advises wearing a blanket in order to:

• the cat did not lick the seam
• the seam is not damaged
• infection (bacteria, fungi) did not get into the seam

Cat blankets are sold, but they are expensive and only needed for a short period of time. The product can also be made with old nylon tights using a pattern.

IMPORTANT: A blanket can be sewn from several patches of nylon, or you can stretch the material and make a one-piece product

How to make a mermaid tail out of stockings?

A mermaid tail may be needed for a masquerade, for photography. Little girls often ask to do it too.

I must say that the mermaid tail of tights is rough. But you can try to skillfully decolorize it.

There are several options for creating a costume element.

1. Need to buy tights big size. One galosh is immediately cut off, it is not needed. A fin frame is inserted into the foot of the second. They insert both legs into a galosh with a fin, it turns out a tail. If you use a monofin for such a suit, it is quite possible to swim in it.
2. Take tights right size. Cut off from them lower part. The tights are cut along the inner seam of each ear and, after that, the front and back parts are sewn together to make a skirt. The fin is decorated with fabric or lace. In such a tail you can walk

IMPORTANT: The tail of the tights is sheathed with sequins, pebbles, lace, satin ribbons to get an imitation of scales. It can also be dyed with fabric paint.

How to cut tights in a spiral?

To make a rug, wicker bedspread or furniture cover out of tights, they need to be cut into yarn in a spiral. You need to understand right away that this is a rather long occupation.

1. Socks and upper part of tights are cut off
2. Tights are cut so that each strip is about 1 cm thick.
3. An incision is made on top of the canvas and a strip of “noodles” is slowly cut, trying not to cut it and keep the same length
4. The yarn obtained from both bootlegs is tied together with a neat knot

How to knit a rug from tights on your fingers

Using yarn from old tights with knitting needles or a crochet hook, you can knit an interesting and durable rug for the hallway, summer cottage and even the living room.
You can make it with your fingers. A detailed master class is in the video below.

VIDEO: There was a use for old tights! Cozy rug! Utilitarian needlework

Fairy-tale characters are ideal for those who want to make toys with their own hands. In this article, I will introduce you, my readers, to the design of a nylon flower dwarf doll. I named my toy Faya.

You can make a doll head out of nylon by watching the video below the article. Elena Lavrentieva gives detailed wizard-class, and I, using this video, make my own toy. Having learned how to make a head from kapron, you can also make your own author's doll according to your own design. Doll size 30 cm.

To work, you need to prepare the following materials:

1. Nylon tights or flesh-colored socks.
2. Sintepon.
3. Pastel oil or cosmetics.
4. Threads to match the color of tights and threads for sewing clothes.
5. The needle is thin and long for making the head.
6. Fabric for dress and beret.
7. Lace and braid.
8. Thick wire - 3-4 mm and copper with a section of 1.5 -2 mm for legs and arms.
9. Styrofoam egg 10 cm and a ball 3 cm.
10. Yarn.
11. Felt.
12. Buttons.
13. Sole cardboard.
14. Eyes.
15. Pastel oil or acrylic paints.
16. Hair purchased or from yarn (at your discretion).
17. Glue gun or second glue - gel.

Sequence of work.

1. Head.

We make a ball with a diameter of 9 cm from the padding polyester. The ball should be dense, but not very tight. We insert it into the capron and tighten the thread from above. We roll a ball for a nose measuring 2 cm and insert it from the bottom in the center of the face. We tighten the capron with a thread from below.

We do not cut off the excess, because it is useful for the body. We begin to pull the nylon on the video. This is not a quick job, so take your time, do it carefully. Threads use sewing No. 35-40. The needle is long. The video can be rewound if you do not understand, or do not have time for the master.

2. We begin to draw a face. We emphasize the lines where the nylon tightenings are made: the eye area, nasolabial folds. We paint lips and cheeks. Glue on the eyes. We draw eyebrows.

3. We do a hairstyle. There are many hair options. Which one you choose is up to you. I made from a ready-made wig that I bought in a store. The easiest option to make from yarn for knitting. Cut the threads of a certain length and sew along the parting on the head. You can make pigtails or tie ponytails.

4. Torso. Let's make it from an egg. Alternatively, it can be made from synthetic winterizer, which is placed in the lower part of the capron, and sewn up. I have an egg in. I twisted the neck with a felt roller around and glued it.

6. Legs. We measure a thick wire. (15 cm) - 2 pieces. With pliers we bend 4 cm for the foot at an angle of 90 degrees. Lubricate the ends of the yarn (any color) and wind it on the wire, not reaching 2-3 cm to the top. We make shoes from a foam ball cut in half. Cut off the sides from each half. We cut the grooves from below and glue them on top of the wire feet.

Spreading glue, wrap them with yarn. Glue the toes of the shoe with patches of felt. Glue a cardboard sole to the bottom. We decorate the joints with a cord or a strip of felt. From above we decorate with bows and glue flowers.

We insert the legs into the bottom of the egg, making holes with an awl and smearing the ends with glue.

7. Hands. We measure the wire 10 cm - 2 pcs. We wrap it with synthetic winterizer, fix it with a thread. We sew hands from kapron and insert the wire in the synthetic winterizer inside. We form fingers by stitching the capron with a needle and thread. We sew the arms to the body for the upper edge of the capron.

8. Clothes. Here you can show your own imagination and sew the outfit you want. I sewed the dress from a simple rectangle of fabric and sewed on a frill. Decorated with lace. The sleeves were sewn on by hand. Gathered the top with a needle and thread and tightened.

9. Beret. I used ready-made from a toy, so there is no description. You can knit a hat.

10. In the hands of my flower Fai, I gave a flower made of foamiran, but it can be any flower, even made of paper.

Everything! The doll is ready. Now she will take her place in the interior. I wish you creative inspiration!

Flowers have always been considered the most the best decoration for home. However, they have a huge drawback - they fade too quickly, and even the most luxurious bouquet has to be thrown away after 6-7 days. That is why at all times craftsmen sought to create a rose, tulip, daffodil, chrysanthemum, etc. from paper, fabrics, plastic, wax. Everyone remembers the fairy tale about how Danila the master made a flower of magical beauty from such a seemingly unsuitable material as malachite.

And today there is no shortage of craftsmen who can create beauty from anything, even from old nylon tights. Moreover, bouquets from this type of textile are often simply indistinguishable from real ones and even more beautiful. That is why there are always many who want to learn how to make flowers from nylon.

What will be needed?

To make such tender and beautiful crafts, first of all, you need a capron. Of course you can take upper part from stockings or tights of your own or your daughter, as children's models are brighter and you can find a variant of the desired color. In addition, in specialized stores today they sell skeins of nylon for crafts 50-80 cm long (both plain and with smooth or contrasting color transitions and patterns).

To make flowers from nylon, you also need to purchase 2 types of wire:

• rigid floristic, used to make stems;
• flexible different colors, designed to create the frame of the petals.

The first type of wire, in turn, comes with a plastic or paper coating. Usually its standard length is from 30 to 80 cm. As for flexible, it is sold by the footage, and there are options for different thicknesses, with numbers from 18 to 30.

You also need to get templates with a diameter of 1.7 to 7.5 cm. If they are not sold in your city, then you can glue such cylinders yourself from a sheet of fairly thick but easily bent cardboard.

In addition, to make flowers from nylon with your own hands, you will need a green teip tape, through which the parts will be fastened together and the stems will be formed.

Additional accessories and tools

In order for the flowers to turn out to be as similar as possible to real ones, it is also worth buying ready-made stamens and pistils made of plastic. It will be ideal if you can also find ready-made sepals and leaves.

As for what tools will be needed to make nylon flowers, their set is quite simple. These are round nose pliers, pliers, scissors. You will also need cotton wool, threads in the color of nylon and a glue gun.

Flowers from kapron: a master class on making violets

To create such a craft you need:

If you wish, you can make 4-5 such crafts and put them in a small vase or include them in various floral arrangements.

Bud making

When creating compositions based on capron flowers, you must also use buds. They can be made as follows:

• two identical wire loops are twisted from the wire;
• connect them together so that you get something like an egg beater for mixers;
• they put cotton wool inside the "bud";
• fit it with a nylon of the desired color and pull it together at the base with a thread;
• wrap the base with teip tape.

Gladiolus

Flowers made of nylon and wire can also look like gladioli. To do this, you just need to work a little more, since you need to place three or four flowers on one stem, each of which should consist of 6 petals. A feature of this craft is that the leaves of the "gladiolus" should be exactly the same as the petals, only green.

Cala

This is probably the most easy option crafts, based on flowers made of nylon and wire. Even a beginner can handle this job.

In addition to traditional materials, you will also need a piece of cotton wool for the stamen. This part is made as follows:

• make a small loop on the wire;
• wrap it with a piece of cotton;
• pull the yellow nylon on top and fix it at the bottom with a thread.

There is also an alternative. To make a stamen in this way, the edge of a piece of yellow nylon is clamped by bending a piece of wire a little larger details they want. Then the rod is tightly wrapped around it and fixed at the bottom with a thread.

• one large petal is made from white nylon and wire;
• insert a stamen into it;
• wrap the base with green teip tape and continue wrapping the stem, adding two or three leaves of a characteristic shape.

Wildflowers

Thanks to the properties of a flexible wire, it is possible to make the petals of the most different shapes. This means that it is possible to create flowers from almost any type of nylon. For example, blue poppies look very gentle and romantic.

In the manufacture important role bright yellow stamens play, which should be quite a lot. If you were unable to purchase them in the store, then try to make these parts yourself. To do this, you need to wind a wet piece of cotton wool on pieces of yellow wire (5-6 cm long) to make a rather dense ball. When the "stamen" dries up, it must be dipped in yellow gouache for a few seconds.

As for the petals, they must be formed on the basis of a template with a diameter of 4 cm. Then it is necessary to give the wire loop the shape of a petal with a zigzag edge. In addition, unlike the violet flower described in the previous master class, the blue poppy has a pronounced cup, which will need to be created by tightly wrapping the base of the flower with green tape.

Now you know how nylon flowers are made, and you can try your hand at the art of making beautiful compositions for decorating your home.

Not so long ago, needlewomen found an unusual use for old nylon tights. Of them began to make incredible beautiful toys. Unusual kapron dolls have already become decorations for many houses. Yes, kids love these crafts. After all, they have the opportunity to create the doll that they want the most.

Not so long ago, needlewomen found an unusual use for old nylon tights.

The simplest do-it-yourself stocking doll made of nylon or nylon socks: master class country

To make your baby happy new toy required minimum time and cost. A cute baby doll made of stockings can also be presented as a small present to someone close to you. Thus it is possible to do christmas dolls or for any other holiday as a gift. Such crafts will definitely find a special place in the house. Let's go over the course of action step by step.

What is necessary:

• kapron tights;
• synthetic winterizer;
• yarn;
• scissors;
• threads;
• wire;
• needle;
• fabric and ribbons;
• thimble.

Work progress step by step:

1. Take a synthetic winterizer and divide it into a couple of parts.
2. Fill the stocking and twist, thereby dividing it in half.
3. Roll an additional ball from a synthetic winterizer or foam rubber and insert it into a stocking - this will be a spout.
4. Fix the nose on the stocking with a thread.
5. Also highlight the mouth with threads.
6. Enhance your lips with lipstick.
7. Embroider eyes in this way.
8. Form eyelids from the remnants of nylon, and take bristles for eyebrows.
9. Make hair out of yarn.
10. From the second part of the workpiece, form the buttocks of the baby doll. For this purpose, sew a longitudinal recess with a thread.
11. Form a frame for the hands from the wire.
12. Wrap it with synthetic winterizer and cover it with nylon.
13. Make legs and be sure to highlight the fingers with dimples in the area of ​​\u200b\u200bthe feet.

Sew suitable clothes.

Gallery and records: do-it-yourself kapron dolls (25 photos)

Pantyhose doll: all the secrets of facial tightening and the formation of facial expressions (video)

Nylon stocking toy: step by step instructions and diagram for beginners

A small toy can be easily made in an evening. Then you can give such mini-baby dolls to all your friends on the eve of some significant event and even during the usual trip to a bar or beauty salon. And the kids will be incredibly pleased to receive such a gift from their mother.

A small toy can be easily made in an evening

Progress:

1. Cut off the sock from the tights and fill it with padding polyester.
2. Tie into a tight knot.
3. Mark the sections of the head and torso, and then drag the workpiece with threads.
4. Stretch the neck area as well.
5. Form the arms and legs of the baby doll by sewing a circle, making a basting stitch.
6. Pull the thread and end up with round limbs.
7. Additionally, form the navel and buttocks of the toy by pulling these places with threads.
8. Glue the hair on top.
9. Embroider or draw eyes and mouth.

Wrap the baby doll in a piece of cloth or sew clothes for him.

How to sew a face for a nylon doll

The most important part in the process of work is sewing the face of the future doll. It depends on him how good the finished craft will look. Naturally, this process must be approached as responsibly as possible.

What is necessary:

• tights;
• synthetic winterizer;
• needle;
• threads.

The most important part in the process of work is sewing the face of the future doll

Progress:

1. Insert the synthetic winterizer into the prepared capron.
2. Pull off the top and stab with a pin.
3. Fold a small piece of padding polyester into a strip, at the same time make it a little thinner in the upper part, and tuck it in the lower part.
4. Lay the formed nose in the center of the face being made.
5. Form eye sockets by slightly pressing these areas with your fingers.
6. With pins, stab those places where the tightening will be done (the area of ​​\u200b\u200bthe bridge of the nose and the middle of the nose).
7. Insert a needle with a thread folded in half where the first of the pins is fixed and bring it out at the second mark.
8. Go back and repeat the same steps, thread the thread through the loop that has formed.
9. Pass each segment at least three times.
10. In the nose area, make nostrils, initially marking these places with pins.
11. Pull the lower edge of the workpiece at the base, stretch the needle through the entire head and bring it out at the back of the head.
12. Grabbing a little synthetic winterizer with a thread to form lips.
13. Sew an additional nose bridge.
14. Break off the top edge and add a little more synthetic winterizer to the workpiece.
15. Form cheeks.
16. Twist small rollers and form eyebrows from them.
17. Draw out the ears.
18. From above, bend the workpiece and flash it.

Fix on the face of the future doll eyes made of buttons, painted with paint.

Doll from a bottle and a nylon sock

From plastic bottles and kapron create unusual and incredibly beautiful frame toys. The method of their manufacture is as simple and clear as possible. Children can also be involved in this process if desired. They will find it fun and easy to complete this task.

Progress:

1. Make a small hole in the bottle and then cut off the bottom.
2. Wrap it completely in a synthetic winterizer and place it in the part cut off from the tights.
3. Roll the filler into a ball and place it in a bottle to further shape the face.
4. Using a thread and a needle, make a nose for the doll.
5. In order for the toy to have cheeks, the area of ​​\u200b\u200bthe chin and forehead, put a little more padding polyester into the blank.
6. Attach eyes to the workpiece and form a neat mouth.
7. Pull the neck area with threads.
8. Slowly pull the lower part of the tights up and immediately pull it out through the neck.
9. Fix the material at the top.
10. Sew hair.
11. Make a reliable frame for future hands using wire.
12. Wrap the frame with padding polyester and pull capron over it.
13. Sew each finger.
14. Sew finished parts to the main workpiece.

Unusual and incredibly beautiful toys are created from plastic bottles and nylon

Sew clothes.

MK - do-it-yourself police doll

The method of sewing such a toy is in many ways similar to the manufacture of a baby doll. The only difference is that you must first make a frame. Thanks to this, the policeman will become mobile and it will be much more interesting to play with him.

Progress:

1. Make a wire frame, the length of which should be about thirty centimeters.
2. Separately wind the hands with electrical tape.
3. For shoes, small loops are twisted on the legs.
4. After that, make a head and draw a face.
5. Sew on the hair using yarn.
6. From small pieces of wire, make fingers and immediately wrap them with padding polyester.
7. Sew fingers and even nails.
8. Screw the finished palms to the main frame.
9. Wrap the entire structure with filler and place in pantyhose.
10. Sew on the head.

I was asked to make a present for Palm Sunday. This doll was supposed to have a bouquet of flowers in her hands as a gift for a bright holiday.

I live in Portugal and the main population of the country is Catholic. According to tradition, on Palm Sunday godchildren give bouquets of flowers to godparents. In order to keep the gift with flowers as long as possible, the client decided to present it in the form of a Doll with a bunch of flowers in her hands, made in stocking technique. And by the way, I really liked this gift.

Let's start making a doll from kapron.

We form balls from a synthetic winterizer for the head. One large head ball, one small nose ball and two cheek balls. Two small sausages, one for upper lip, smaller, and one for the lower lip more. If necessary, you can add a synthetic winterizer for the chin. We fit the ball for the head with nylon, put the balls and sausages under the nylon, and temporarily fix the tight stocking at the back with a thread or a pin.

Starting to do nose tightening dolls with a long needle and thread folded in half. We continue to make tightening of the cheeks, lips, bridge of the nose and eye fossae. Watch the video lesson.

The next stage is doll face makeup from stockings. To do this, use shadows of flesh tones, blush.

Fixing makeup face with hairspray twice and let dry.

Eyes for the doll can be done in different ways. In this case, glue the upper eyelid from a piece of stocking folded in half to the finished eye. Glue the eyes into the eye holes.

Making the feet for a kapron doll. We form two identical balls for the legs, fit with nylon, the knot should be located at the top of the foot. Sew the toes with thread.

Hands for a stocking doll. We form balls for the hands, we fit them with nylon, the knot should be on the side, and we sew the fingers of the hand.

See the most detailed master class on making a doll with a bouquet of nylon flowers.