Slippers are, first of all, an attribute of the home. They are not intended for going outside. This type of shoe appeared a very long time ago. There are several types of slippers. The most common ones are homemade. They are usually soft. Moreover, they can be either with a closed nose or heel, or with an open one. They can have a hard or soft sole.

Types of DIY slippers

IN female models A small heel is allowed. They are made from various materials. They can be made entirely of fabric, leather, rubber, plastic, foam, or they can be combined.

Men's slippers are distinguished by laconic colors: all shades of gray, brown, blue, which can be combined with each other or with white and green. They are distinguished by the absence of jewelry, which women are so full of. Like women, they can also be in the form of animals.

Typically, the cut of such slippers requires a completely closed foot to the shin and the presence of elastic. In these slippers you will not freeze even in the harsh winter. Men prefer open heels and toes. This is due to the fact that moisture loss in the foot area is higher in men than in women.

Homemade slippers rarely have hard soles, unless the craftswoman has parts from old worn-out slippers. Such slippers are especially valuable, since the soul of the master is invested in them. They can be made of leather, suede, flannel, drape, wool, calico, with or without embroidery.

To make these slippers you will need the following tools: needles, awl, upper fabric, sole fabric, canvas, Moment glue.

At self-production For slippers, you can either rely on photos of knitted house slippers from the Internet, or come up with your own, unique ones.

Knitted slippers

In this article we will conduct a small master class “Knitting slippers with knitting needles.”

To begin, cast on the knitting needles a number of loops equal to the volume of the foot and a multiple of three plus two edge stitches. Knit 7 cm with an elastic band (knit 1 loop, purl 2). After this, divide all the loops into three equal parts, knit the first third with garter stitch (in the front and back rows all the loops are front), then 1 loop is knitted on the front side, and on the back side, respectively.

Now we collect all the loops from the elastic side onto a thread and tighten them. Using the same thread, we sew the edge to the required length to fit the leg. Fold the other end in half and sew it too. This way we will have a heel, and where the elastic will be there will be a toe.

Slippers without seams

A more complex model is house slippers without seams, knitted on five knitting needles. These slippers are knitted like socks. We cast on the required number of loops equal to the volume of the ankle and distribute them onto four knitting needles. The number of loops must be a multiple of four.

Next we knit an elastic band (knit 2, purl 2) in the round. After 2 cm, we begin to knit in garter stitch (all stitches are knit on the front and back sides), and we continue to knit one third with an elastic band. This part will later become the heel.

After 2 cm we knit only a third with an elastic band to the end of the heel of the foot. At the beginning of each row, we knit the last two loops together so that the elastic pattern is not disturbed. We do this until there are only 9 loops left on the knitting needles.

Now we pick up the missing loops from the sides and continue knitting in the round. Having knitted to the end of the little finger, we begin to decrease the loops. You can decrease it in two ways. The first is to divide all the loops into four parts and remove one loop at regular intervals. It turns out that there are 4 loops in each knitted row.

The second method allows you to get a more beautiful and even sock, similar in appearance to the tip of mittens. To do this, you need to divide all the loops into exactly two knitting needles, dividing the top and bottom of the trail. Then we knit two loops together at the beginning and end of each knitting needle.

Whatever method you choose, you need to knit this way until one loop remains, which we close. Your tracks are ready! Everyone will be happy with such a gift!

Photo of knitted slippers

Do you, dear needlewomen, have a lot of knitted items with which you can diversify your home environment? We present to your attention ideas of interesting and beautiful models for crochet for home.

The advantage of crocheting for the interior is that, firstly, it is easy, and secondly, crochet can do absolutely everything - any shapes, various textures, numerous patterns and absolutely different sizes. Using knitting patterns and master classes on crocheting items for the home, any craftswoman can literally knit the entire house without much difficulty. And it’s okay if you have very few ideas on how to use this very hook. As you know, the main thing is desire!

Let's think together about how you can decorate your home environment using knitted products. And we will not only think, but also bring to life crochet ideas for home interiors - our authors offer interesting master classes with diagrams and detailed description work.

Rules for using knitted items in decoration

• the most important rule is to make products so that they do not look like they were inherited from your grandmother (of course, if there is no such idea);
• in the interior it is not only possible, but also necessary to arrange a variety of knitted items for home decoration - but with one caveat: you should stick to one style, but the color and texture can be completely different;
• The knitting technique can be completely ordinary, but the material and the knitting tool will add a special touch to the products - namely, very thin or very thick yarn - our crochet master classes for the home are just about such unusual products;
• the way of using knitted items can be completely unusual, for example, covers for lamps or even watches - such things will surprise and will definitely cause a fit of envy among your girlfriends.

Blankets, pillows, bedspreads

Of course, this is the first thing that comes to mind when you want to knit something for your home. It’s clear that they bring a touch of idyll to the home environment and, in addition, these interior items are functional. Agree, it’s much more pleasant to cover yourself with a one-of-a-kind, hand-knitted blanket than a mass-produced Chinese one!

Covers for armchairs and ottomans

These covers, knitted from thick threads, in addition to changing the size of the armchairs and ottomans themselves, also make large-scale changes to the decor of the room. Such covers will make the atmosphere even more cozy and homely. And they are easy to knit, easy to change and create a feeling of newness in the decor of the room.

All kinds of knitted items

Potholders, coasters, teapot covers, napkins, fruit baskets... you can't list it all! These are not just some trinkets, these are real helpers for the hostess.

Decoration of interior items

This is a rather interesting trend in modern home design. A competent combination of knitted products and interior items will not only bring zest to your home, but will make it truly unique. Have you seen a lot of knitted watches or flowerpots? Be the first, surprise and make the hearts of your loved ones beat faster! Dare!

You can knit warm, durable socks by studying this master class with video. For knitting socks, a compacted stockinette pattern is used, which is knitted very simply in both circular rows and straight stitches.

Thanks to the knitting technique described below, the fabric turns out to be thick, but less elastic, so you need to accurately calculate the number of loops to start knitting so that the socks are the right size.

In the photo, the socks are knitted with medium-thick yarn and No. 4 knitting needles. The knitting density in width is 20 loops per 10 cm.

You can knit cute socks with longitudinal stripes using this video tutorial. The method of knitting socks is not complicated; for knitting you will need two straight needles or knitting needles on fishing line No. 3, as well as medium-thick yarn of 50 grams in two colors.

The socks are made in garter stitch. This pattern is elastic, so the knitted socks fit the foot, making them comfortable and warm.

Socks can be knitted using this method to any size, but first you need to calculate the number of loops for the initial row.

You need to take measurements from the heel to the desired cuff height and measure the length of the foot from the heel to the toes. For foot size 39 these parameters are 15 cm and 24 cm.

Knitting socks on two knitting needles is not difficult, follow a detailed master class + video, you get socks with a raised elastic pattern. Thanks to the elastic knitting, the socks fit tightly to the feet and at the same time they are comfortable and warm.

To knit socks you will need 200 grams. yarn Alize Superlana (100g/100m), knitting needles No. 4.5, a couple of extra knitting needles or pins.

If you use a different yarn and a different knitting needle number to knit socks, then you need to knit a sample and, based on the knitting density, calculate how many loops to cast on to start knitting the sock.

Even those who are just learning to knit can knit these stitches on two knitting needles without seams.. Footprints are knitted using this method easily, without complex patterns or decorations. Despite the fact that the footprints are simple, they look neat on the foot, fit tightly to the foot, and do not fly off the heel, so they are comfortable to wear at home.

To knit leopards you will need about 100 grams of yarn and 2 knitting needles No. 3.

Warm cozy slippers- socks are knitted on the base felt sole . To knit such slippers, you need to purchase footprints made of felt or other material.

To knit slippers you will need yarn 100 g Alize Lana Gold classic, double knitting needles No. 4.5, crochet hook No. 4.5, additional knitting needle, gypsy needle.

The slipper consists of two parts - a knitted felt sole and a knitted upper part.

Even if you use plain yarn to knit these socks, they will turn out interesting, as they are decorated with a pattern of patent loops.

Sizes: 38-39 (40-41)

You will need: 100 g of multi-colored yarn in autumn colors (75% wool, 25% polyamide, 420 m/100 g); stocking needles No. 2.5.

In winter, everyone loves to wear knitted socks; needlewomen wrap themselves and their loved ones with warm gifts. But knitted socks have one drawback - they quickly wear out on the heel or sole. To strengthen these places, you can knit with an additional thread or knit socks with reinforced heel and sole with a denser pattern to extend the life of the socks.

These socks are knitted with a reinforced heel and sole in a dense pattern, and its upper part is made with stockinette stitch, it remains elastic. The technique of knitting socks with a reinforced heel and sole is slightly different from the classic knitting of socks on five knitting needles.

To knit socks you will need 5 stocking needles No. 2.5; medium thickness yarn 100-150 g (240m/100g). The description of knitting socks is presented for sizes 40-41.

This a way to knit socks on two knitting needles without seams very simple. The result is socks with relief pattern elastic and weave in the center. Knitting a sock occurs in stages, first the outer part is done, then, without interrupting work, the back of the sock is knitted from the toe to the heel and up to the edge of the cuff. Since the socks are knitted with elastic, they hug your feet well, and the weave pattern at the center makes them interesting.

To knit socks you will need 2 knitting needles No. 3.5 and thin acrylic yarn 150 g (two-ply thread is used).

Description of knitting socks on two knitting needles:

Do you have hand-knitted fragrant sachet pillows at home? And other pleasant and slightly unusual little things?

Homemade accessories that give your home a multi-colored aura of warmth and comfort:

• colorful panels made with stockinette stitch;
• knitted vases and boxes;
• covers for your favorite novels;
• candlesticks with Irish braids;
• colorful frames for watches and photographs;
• bags for nuts.

Have you forgotten about the kettle warmer? Have you got cozy covers ready for winter that will save heat for your mulled wine set and keep mugs of tea from getting cold? A little yarn and a couple of knitting needles will help the old one sofa cushion or a vase that has long lost its color can find a new birth and decorate the interior. Cute little things in a “homey” style, knitted by caring hands, can become a small designer masterpiece. Funny, fine workmanship or deliberately careless, knitted crafts always at the peak of fashion. Plus, it's a good gift.

In our selection of charming little things for the home you will see drawings and knitted patterns. You will read the descriptions, done carefully, loop by loop. This will push your imagination and allow you to calculate how much yarn, beads, beads you will need to realize the idea, and which knitting needles are more convenient to use.

What can be knitted from the remnants of different yarns - of course, indoor slippers with knitting needles. For the cold season, wool blend or wool yarn with several threads is suitable. Well, in the summer, of course, cotton threads, cord, and linen are better. Before knitting slippers, think about what is best to make the sole: you can buy a ready-made insole, or cut it from felt, fur, or leather.

Adorable pink slippers are knitted from thick wool yarn. The diagrams are given for three sizes: 22 cm. Foot length - size 35/37 (a), 24 cm. Foot length - size 38/39 (b), 26 cm. - 40/42 (c). We knit on two needles, the third - additional - is needed for the “braid” pattern. The main stitch is garter stitch (knit stitch).

To work you will need:

1. Thick wool blend yarn (50% wool, 50% synthetic) 100 g/100 m - 1 skein.
2. Knitting needles 5 mm thick.
3. Additional knitting needle for a pattern.
4. Circular knitting needles for convenience (optional).
5. 2 pins.

Knitting density: 10/10 cm = 13 sts/26 rows. Knitting patterns for the left slipper - pattern A 1, for the right slipper - pattern A 2. The pattern depends on the size.

Left slipper

We start knitting slippers on two knitting needles with the left slipper. Cast on 6 mm needles - 36/38/40 stitches - for a/b/c product sizes. Having distributed the loops along the knitting needle, we knit 4 cm in garter stitch. Next, we will knit only on the first 11/13/13 loops, and remove the remaining 25/25/27 stitches on additional stitches. knitting needle While we do not touch this part of the knitting, we work with the first loops. Next, we knit these individual first loops (the top of the slipper with the pattern) like this:

• 1st row: knit 11/13/13 sts.
• 2nd r: add 2 loops, it turns out 13/15/15 knit stitches.
• 3rd row: add 2 more loops, we get 15/17/17 stitches.
• 4th row: knit according to pattern A1 with edge loops, that is, 1 edge. p., drawing A1, 1 chrome. P.

In this way, we knit according to the pattern until we reach a height of 6.5/9/9.5 cm. We knit the last row so as to make 4 decreases. We should get 11/13/13 p.

Now is the hardest part. We have loops for extra. knitting needle, and top part products. Next we raise the loops of the sides of the top of the slipper, on one side - 12/14/16 sts, and on the other side of the top another 12/14/16 sts. Together with loops with additional. the knitting needles should be 60/66/72 sts. It is most convenient to knit further on circular knitting needles; in the absence of this, we knit on regular additional knitting needles. sp.

Next, we take measurements. We take 1 pin and mark the mark of the toes with it, with the second pin we mark the middle of the heel. Knit 2 cm, and start decreasing one stitch on both sides of each pin (knitting two stitches together). That is, in every r. we decrease 4 points. We make decreases until we reach the height. 5/5/6 cm. Close the loops.

We knit the second, right slipper in the same way as the left one, only knit the top of the slipper according to pattern A 2. Sew the seams on the foot of both slippers. That's all.

Knit slippers from squares - good idea. Knitting is exciting; you can make home slippers with knitting needles in one evening, sitting in front of the TV or listening to good music. Cute closed slippers tied simple pattern“grain” and “rice” will warm your feet and add comfort. Slippers on 2 knitting needles, crocheting parts. At the end of the work, the parts are sewn together, as in the diagram. Size 36-39.

To work you will need:

1. Thick yarn Pingouin (50 g/34 m.) 30% wool, 70% acrylic - 2 balls of black and orange.
2. Knitting needles 4 mm thick.
3. Hook 4 mm thick.

We knit strips in garter stitch: 2 rows of black yarn, 2 rows. orange We knit the main parts with a “rice” pattern and a “grain” pattern. Pattern density: square 10/10 cm = 15 p./15 r.

1st r.: 1 cr., 1 knit., 1 p., 1 k., 1 p., etc.
2nd and 4th rows: how the mating looks.
3rd r.: 1 cr., 1 p., 1 k., 1 p., 1 k., etc.

The second name of this pattern is pearl; there are simply alternating faces. and out. loops.

• Cast on 15 sts and knit 10 cm. 2 squares A with grain pattern using orange yarn. We thread the thread through the loops, but do not close the loops. This is necessary for the flexibility of the seam.
• Cast on 15 stitches on the needles and knit 1 square B with the “rice” pattern using orange yarn. We knit 10 cm. We also thread the thread into the stitch, and do not close the knitting.
• Dial 15 sts and knit 1 square C with the “rice” pattern, color black. We knit 10 cm, not closed. knitting - we thread the thread.
• Cast on 2 times 15 stitches and knit 2 times 10 cm 2 squares D in black garter stitch. Do not close the knitting - thread through it.
• We knit 2 squares. E garter stitch stripes in two colors. (We cast on 15 stitches, knit 10 cm each). Not closed knitting - we thread the thread.

We assemble the squares following the diagram. For the top of the slipper, sew side C to side D. After the slippers are sewn, on the sides of the squares E, make a crochet stitch with black yarn. First step: do RLS, but from left to right, and not vice versa. We knit the second slipper like the first. Knitted slippers knitting needles are ready. Both one and the other sneakers are suture, that is, sewn from squares.

Knitted house slippers are a comfortable and necessary thing. Such beautiful slippers knitted They are machine washable, comfortable and beautiful. Good for a gift, and for yourself, your loved one. A simple version of knitted slippers for beginners. The slippers are decorated with flowers, crocheted, and embroidery woolen threads. There is bead decoration. Product size - from 36 to 40.

Beginning of work

To work you will need:

1. Yarn of medium thickness (For example, “Violet” - in 3 threads).
2. Leftover wool for embroidered flowers.
3. Beads of different sizes.
4. Knitting needles 4 mm thick.
5. Hook for flowers 2 mm.

We begin to knit the base of the slipper. We cast on 34 loops on the knitting needles.

• 1st row: 1 chrome, 32 faces, 1 chrome.
• 2nd row: 1 chrome, 10 knits, 1 purl, 10 knits, 1 purl, 10 knits, 1 chrome.
• 3rd - 34th rows:

Odd rows - like 1st row.

Even rows - like the 2nd row.

35th row: 1 chrome, 11 knits, increase 1 (knit 2 from 1 stitch), 8 knits, increase 1, 11 knits, 1 chrome.

How to make 2 loops from one loop - adding 1 person. with a tilt to the left.

Row 36: knit 1, knit 10, knit 1, knit 12, knit 1, knit 10, knit 1.

37th row: 1 chrome, 34 faces, 1 chrome.

38th - 63rd:

Even rows - like 36 rubles.

Odd R. - like 37 rub.

64th - 72nd - rib 1 k/1 p.

We do not close the loops, leaving a tail. Where there was a series of increases is the place where the foot expands.

Let's start with the sock. Pull the remaining tail through the stitches on the last row. Pull the thread and secure it by tying a knot (Photos 2 and 3). Then sew the part that is knitted with an elastic band + another 8-9 rows (Photos 4 and 5).

You can make the tracks deeper or smaller - it all depends on the number of main loops cast on. Focus on the width of your feet.

Then we move on to the heel. We pass a thread through the middle of the beginning of our knitting (side A) and tighten this middle part. And we sew 2 parts next to each other (B and B) with a neat seam (Photo 7, 8, 9).

This way you get a slipper like this.

Close a chain of 4 VP half-columns into a ring. From the same loop, knit a trail. flail from 4 VP, closing a half-column in a ring (Hook in the 1st st. chain). Make 4 petals in this way. As a result, the connection 4th and 1st petal conn. pillar.

You can decorate your slippers in any way, it all depends on your imagination.
Felt or leather insoles are sewn on for warmth.

Beautiful, cozy slippers with knitting needles with a pompom can be knitted on 5 knitting needles, without a seam. The tracks are knitted quickly; they do not need to be sewn together at the end of knitting. A very simple master class: “Knitting slippers with description” - attached. It is especially relevant for beginner knitters.

To work you will need:

1. 5 knitting needles 4 mm thick.
2. Yarn of medium thickness (Troitskaya - 2 threads).

Knitting density: 10/10 cm = 20 p./24 r.

We will make such traces in the same way as knitting a sock.

We cast on 32 loops on the knitting needles.
1st row: all facial.
Row 2: knit 10, purl 1, knit 10, purl 1, knit 10.
3rd row: how the mating looks.
4th row: like 2nd.

For those who have never knitted socks with 5 knitting needles, here is a description of how to make a heel. Or maybe we knew how to do it before, but we forgot the details - let’s refresh our memory. We start forming the heel from the 16th row. For a beautiful heel you need to knit 10 faces. (This is the side), p1, k10, p2tog. (This is the central part). In the 16th row we attach 1 stitch to the side. Let's turn the work around.

Starting from 17 p.m. We continue to knit only the center of the heel (central part - 12 stitches), adding 2 side parts to it as we work.

So, 17 rubles: remove 1 p., 10 knits, 12th p. center. remove the first stitch, knit the side stitch. face, we transfer the removed one to the knitted one. Next, repeat the 16th and 17th rows, gradually adding 2 side parts. It turns out that in purl. rows of the last paragraph center. parts + first st. side part - knit 2 together purl. And in persons. rows - last point center. remove the first stitch without knitting, knit the 1st stitch of the side stitch, and transfer the removed stitch to the knitted stitch.

Now there are 12 stitches left on the knitting needle. Center. ch. Next - cast on 10 sts along the edge of the side ch. (Look at the photo).

Turn the part over to the other side. We knit all the stitches of the side section, the central section, then cast on 10 stitches along the edge of the other side section. We should have 32 stitches on our knitting needles (see photo).

We continue to knit. Purl r. - K10, p1, k10, p1, k10. Facial r. - facial. We knit to the bone on the leg, on the sole we get beautiful faces. braids. They tied it to the bone, at the end of the faces. row we put 8 loops on the knitting needle, close the knitting in the round.

Distribute all the stitches onto 4 knitting needles and knit in the round in garter stitch. before our little finger closes.

1st knitting needle: knit 1, knit 1, knit 1, knitted and knitted, then all knits.
2nd knitting needle: knit all stitches until there are 3 stitches left on the needle - knit (knit two together, knit 1).
3rd spoke: same as 1st.
4th: same as 2nd.

We knit a spout, cutting stitches every other row, then in each row until there is a stitch left for each. knitting needle 2 loops. We connect all the points. We fold the knitting needles in parallel, and remove 2 at a time. Pull the last stitch inward and secure with a knot.

We decorate the slippers with pompoms.

The video shows how to tie simple slippers, very fast.

These simple women's slippers can be knitted for beginners, even if you are not very good at knitting. It is enough to learn how to knit with stockinette stitch (alternating knit and purl) and garter stitch (knit stitch). This detailed master class will be useful specifically for beginners, since the master class has its own diagram for each stage. Knit your own shoes - it's so cool!

Beautiful slippers with two needles fit size 37-38. The main knitting is knit stitch (row - knit, row - purl). We don’t cut the threads, we just alternate them different colors.
Abbreviations: row - r., front loop - knits. p., purl loop - purl. P.,

1. The yarn used is Vintage Chunky (50% wool and 50% acrylic, 100 g. - 145 m., red and white- 1 skein.
2. The thickness of the spokes is 5 mm.
3. Sole, large needle, scissors.

Knitting density - 18 p./25 rows = 10/10 cm.

We knit the sole, alternating white and red thread (row - white yarn, row - red yarn). For the sole, cast on 11 stitches and knit in garter stitch (knit only).

How to make a set of loops.

1st row knit the entire row. With red thread: remove the 1st stitch, knit to the end of the row.

There are 11 stitches on the needles.

Adding a loop from the previous row.

2nd p. persons with white thread: remove the 1st st on the right knitting needle, without knitting, add a st from the previous row. (the diagram shows how to do this), knit until the penultimate stitch, we also add the penultimate stitch from the previous one. p., 1 p. It turned out to be 13 p.

3rd r. knit with red thread: knit without additions.

4th r. persons with white thread: remove the 1st stitch without knitting, increase stitch from the previous one. p., knit to the penultimate st., increase p. from the previous one. 1 purl. It turned out 15 stitches (we knit the last one in order to get beautiful region).
Repeat from 1st to 4th row. until there are 23 stitches on the needles.

Reducing loops along the edge of the product.

Next row: decrease 1 stitch from each edge (see diagram).

Cast on 35 sts on needles.

1st row: knit with red thread. Then comes the faces. smooth surface

Two rubles perform with white thread.

6th row: 12 persons. p., 2 persons together, 7 persons. p., 2 persons together, 12 persons. p. It turned out to be 33 p.

7th row: knit without decreasing.

8th row: 10 persons. p., 2 knits together, 7 knits, 2 knits together, 10 knits. It turned out to be 29 p.

Next p.: 2 knits together, 2 knits together, 7 knits, 2 knits together, 2 knits together. It turned out to be 11 p.

Next r.: 2 together, purl 7, 2 together, purl. It turned out to be 9 p. Close all p.

To make the top neater, you can twist the red and white rope and secure it by sewing it in several places.

With red thread we put 11 stitches on the knitting needles and knit a 20 cm strip in garter stitch (knit stitch).

We close all the loops. All that remains is to assemble and sew the details of the slippers.

We sew each end of the red stripe with a thick needle to the top of the sneaker. Pin the top of the sneaker to the sole so that the middle of the heel is in the middle of the back edge of the sole.

The middle of the top should be aligned with the middle of the toe. We chop and sew all the details. Sew on the bottom sole made of felt or leather. We knit the second pair in the same way.

Rose

We put 10 stitches on the knitting needles with red thread.

1st r.: persons. loops.

2nd row: *K1, 1 yarn over*, repeat until the end of the row.

3rd row: purl row.

4th: repeat 2nd row.

5th row: purl. R. Close all the stitches and wrap the resulting flower in a spiral. Sew the rosette onto the slipper. Slippers on 2 knitting needles are ready.

If you just can’t decide how to knit slippers and which option to choose, we offer this DIY knitting option. Everyone will like these slippers: you, your husband, your son, your mother-in-law - in short, no one will refuse such a gift. An excellent, albeit simple, model - slippers-socks on knitting needles with a description.

The master class is given for slippers using size 36 knitting needles. Let’s say that if we cast on 41 stitches for size 36 slippers, then for size 39 slippers we should cast on 50 stitches, for size 40 - 54 stitches, for size 42 - 60 stitches. We knit the top of the slippers with an elastic band 1/1 or 2/2, whichever you prefer. Women's and men's slippers are knitted on two needles, and then the cuff and sole are sewn together.

To work you will need:

1. Yarn Nako Sport Wool (25% wool, 75% acrylic, 100 g/120 m.)
2. Regular knitting needles 5.5 mm.
3. Stocking or circular knitting needles for making soles.
4. Markers or pins.
5. A needle with a large eye.
6. Knitting density: 11 p./17 r. = 10/10 cm.
7. Cuff

We start working with a cuff 14 cm high. Cast on 2 regular knitting needles 5.5 mm. 41 p. (40 + edge).

On the 1st We start doing 1/1 rib, knitting: edge, k1, p1, k1, p1, and so on until the end of the row. The last one is persons.

2nd row: edge, knit, purl, knit, purl. - until the end of the river Make sure the elastic doesn't get tangled.
This is how we knit 12 rows (6 cm)

7th r.: 41 sts. We need this row to bend the elastic.

Let's look at knitting. If you bend the cuff, then on which side the product looks better - we take that side as the face.

We knit another 16 r. (8 cm). We finished the cuff. Next, we will use the central 15 stitches to make the tongue.

Tongue

So, we have 41 sts on our knitting needles. Divide all the sts into 3 parts, it will turn out something like this: 13-15-13 sts. We will knit the central 15 sts with knit stitches (garter pattern).

This r. knit like this: knit 13, you can immediately remove them on an additional knitting needle, knit 28. to the end of the river Rotate the work. Next p.: 13 p. persons, and we also remove them for extra. sp. The central tongue remains. Here we need to make it up to a decrease of 11.5 cm (34 rubles). The entire tongue will be 14.5 cm (40 rubles). That is, the size of your slippers depends on the length of the tongue. The longer the tongue, the larger size and greater depth will be obtained.

So, we knit 34 r. - we must tie to the middle of the little finger.

35th row: chrome, knit 2 together, knit 9, knit 2 together, chrome.
36th row: (without decreases) chrome, knit 11, purl.
37th row: chrome, knit 2 together, knit 7, knit 2. face, back,
38th row: (without decreases) persons, last. - purl
39th r.: chrome, 2 vm. persons., 5 persons., 2 in., purl.
40th row: chrome, 7 faces, chrome.
Leave 9 stitches of the tongue on the pin, we will not cover them.

The result is a tongue of 14.5 cm.

It is most convenient to make a foot on circular knitting needles, but it is also possible on 3 stocking needles (one is in progress).

We started knitting: edge stitch, knit 12, pick up 20 stitches along the right side of the top of the foot, knit 9, pick up 20 stitches along the left side, knit 12, edge stitch. (75 p.)

Sole

We continue from where we left off.

1st r. - chrome, 2 knits together, 29 knits, 2 vm. persons., 3 persons., 2 vm. persons., 3 persons., 2 vm. l., 28 faces., 2 vm. l., edge (70 p.).
2nd row: knit all 70 sts.
3rd row: chrome, 2 vm. persons., 27 persons., 2 vm. persons., 2 persons., 2 vm. persons., 2 persons., 2 vm. persons., 27 persons., 2 vm. l., edge (65p.).
4th row: 65 sts.
5th row: chrome, 2 vm. l., 25 faces., 2 vm. l., 1 l., 2 vm. l., 1 l., 2 vm. l., 26 l., 2 vm. l., chrome. (60 p.).
6th row: 60 sts.
7th row: chrome, 2 vm. knits., 24 knits., (2 knits together) - 3 times, 24 knits., 2 vm. l., chrome. (55 p.)
8th row: chrome, 25 faces, 2 vm. l.
It turns out 27 stitches on both needles.

We take a needle and sew the seam of the sole from the wrong side with the same thread we used. Then we sew the cuff. That's all. The slippers are ready.

In the video - knitted slippers for any foot in one evening:

Many people like to knit boots, and knitting slippers and boots is not at all difficult. According to these descriptions you will get beautiful boots knitting needles To enlarge the photo, click the arrow in the lower right corner.