Knitting soles for slippers crochet lesson. Interesting and practical crochet slippers with felt sole. Knitting elements: how to knit air loops and crochet stitches
Crocheted slippers are best done on the sole or insole. The insole can be felt, leather, fur. You can cut the sole from the tops of old boots.
Home slippers are crocheted from individual 6-sided motifs. It is advisable to take the insole one size larger. If it is uncomfortable with a simple insole, buy an orthopedic one.
For work you will need:
- Cotton yarn like "Violet" - 150 grams.
- Hook 3 mm.
- Insoles.
- Scissors.
- Awl or thick needle.
The yarn must be connected in two strands, and if the yarn is thin - in three. The knit should be tight so that the slippers keep their shape and are comfortable. First, we tie the insoles, which we pre-pierce with an awl, stepping back from the edge 0.5 cm.The distance between the holes is 0.5 cm.
When tying, we use single crochet posts, two in each hole. Then you need to measure the length of the tied insole around the perimeter in order to calculate the length of the motive in the future.
A prerequisite is that the length of the side of the motif, multiplied by 8, must be equal to the length of the insole along the perimeter (if necessary, you can change the scheme by removing or adding rows to it).
We collect slippers. To do this, take three ready-made motifs and sew them according to the following scheme: sew the sides marked with the number 1 with one front seam. Sew the sides marked with the number 2, getting the back seam. In the future, we will sew the sides under the number 3 to the insole. Leave the sides marked with the number 4 not sewn.
You can crochet the motifs from the outside, or use a needle and sew them on the inside - as it is more convenient for anyone.
You should get this kind of work:
Chip the details together with the insole with pins or sweep them by moving the nose to the right or left of the central part. This will make the right and left slippers. We tie our sneaker to the insole. We got comfortable slippers.
For these variegated slippers, it's best to use a felt sole. Optionally, can be replaced with cut from leatherette or fur.
For work you will need:
- Yarn-wool or wool with acrylic - 150 grams.
- Hook 3.5 mm.
- Felt insoles.
We start knitting with a sock. The pattern can be any, the main thing is that it is convenient for adding. We knit with a crochet pattern. We make additions to the little finger, that is, 4-5 cm.
At the level of the rise, we go to the sidewalls and begin to knit like this.
This is how the canvas turns out. Similar to the letter P. Length is determined by attachment to the foot or insole.
Here is a knitting pattern for the beginning of a sneaker.
Sew back seam. We do this without breaking the thread, from bottom to top in single crochet columns.
We continue to knit in a circle. The height of the sneaker depends on your desire.
We attach the top to the sole, secure with pins for easier sewing.
Sew the top to the sole with an over-the-edge seam. Better to take a tighter thread.
These comfortable warm slippers are perfect for both children and adults. This model has a knitted and leather sole. For work, you need wool yarn (you can have leftovers) and a small hook. The scheme is given for 37-38 foot sizes. If you need a different size, add or subtract the quantity. air loops... We collect 22 air loops and knit a trace according to the scheme:
For one sneaker, we need two knitted footprints. Below is a trace for children's slippers, for them to dial 18 air loops (given for comparison).
To begin with, we take one footprint and begin to knit sneakers from a row of concave embossed columns.
Here's what you should get.
Back side view.
We begin to make reductions from the third row.
We do the subtractions like this: 3rd, 4th, 6th and 8th rows - subtractions on the central five columns. We knit the 1st, 3rd and 5th convex columns together, as incomplete, skip the 2nd and 4th.
5th and 7th rows - on the central nine columns, we make decreases, knitting the 1st, 3rd, 5th, 7th and 9th raised columns together, like unfinished columns. The 2nd, 4th, 6th and 8th are skipped.
We knit the second slipper like the first.
Cut out the sole from a piece of leather, a little less than a trace. Sew on the sole on a typewriter. If you don't have a typewriter, you can do it manually.
We attach the blank to the sneaker and sew it on.
Indoor slippers can be safely called the most demanded and popular type of footwear. Indeed, when we come home after work, we first of all change our casual shoes for home shoes. Putting on such familiar and beloved slippers on our feet, we immediately plunge into the sensation of peace and relaxation.On the market or in a store today there is a huge selection of various shoes for the home. But only slippers crocheted with a crochet can convey a truly feeling of warmth and comfort. self made.
Our today's article will be accompanied by diagrams. Using them, in a few hours you can knit original and unique indoor shoes.
Crochet slippers master class for beginners
If you have just recently picked up a crochet and thread in your hands, if you have just learned to knit the main types of loops, then this step by step master class just for you. Look at the photo below - you can knit such beauty too! But first, we advise you to repeat the basics of knitting with the help of the article
While knitting, carefully read the description and be guided by the diagram shown in the next photo.
Scheme:
The sequence of work in stages
The size of the slippers is 38.
Bottom part
Tie a chain of 33 vp. + 1 vp lifting.
1 circle. 31 st. b / n., 4 st. b / n. in the last chain loop (sock), 31 tbsp. b / n., 4 st. b / n. v last loop(heel)
2 circle. 15 Art. b / n., 3 half-st. s / n., 13 art. s / n., 2 tbsp. s / n. in one loop * 4 times (sock 8 tbsp. s / n.), 13 tbsp. s / n., 3 half-st. s / n., 15 tbsp. b / n., 2 st. b / n. in one loop * 4 times (heel 8 tbsp. b / n.).
3 circle. 15 Art. b / n., 3 half-st. s / n., 13 art. s / n., 2 tbsp. s / n. in 1 loop * 8 times (sock 16 tbsp. s / n.), 13 tbsp. s / n., 3 half-st. s / n., 15 tbsp. b / n., 2 st. b / n. in 1 loop * 8 times (heel 16 st. b / n.)
4 circle. Art. b / n. replace by half. s / n.
18 half s / n., 13 art. s / n., (2 tbsp. s / n. in 1 p., 1 tbsp. s / n.) * 8 times (sock 24 tbsp. s / n.), 13 tbsp. s / n., 18 half s / n., 16 half-st. s / n. (heel).
5 circle. 31 half s / n., 24 half-st. s / n. (sock) 31 half-st. s / n., 8 half-st. s / n. (half of the heel).
6 circle. 103 Art. b / n.
Top part
1 row. Begin knitting from the middle of the heel, purl embossed st. b / n., a row to knit freely so that the sole does not pull.
2 row. 103 Art. b / n.
3 row. 25 Art. b / n., 3 half-st. s / n., 47 art. s / n., 3 half-st. s / n., 25 art. b \ n.
4 row. 25 Art. b / n., 3 half-st. s / n., 1 tbsp. s / n., (2 tbsp. s / n. with one top, 1 tbsp. s / n.) * 15 times, 1 tbsp. s / n., 3 half-st. s / n., 25 art. b / n.
5 row. 25 Art. b / n., 3 half-st. s / n., 1 tbsp. s / n., (2 tbsp. s / n. with one top, 1 tbsp. s / n.) * 10 times, 1 tbsp. s / n., 3 half-st. s / n., 25 art. b / n.
6 row. 25 Art. b / n., 3 half-st. s / n., 1 tbsp. s / n., (2 tbsp. s / n. with one top, 1 tbsp. s / n.) * 7 times, 3 half-s. s / n., 25 art. b / n.
7 row. 25 Art. b / n., 3 half-st. s / n., (2 tbsp. s / n. with one top, 1 tbsp. s / n.) * 5 times, 3 half-s. s / n., 25 art. b / n.
8 row. 25 Art. b / n., 3 half-st. s / n., 1 tbsp. s / n., (2 tbsp. s / n. with one top, 1 tbsp. s / n.) * 3 times, 3 half-s. s / n., 25 art. b / n.
9 row and subsequent knit st. b / n. to the desired height. If necessary, make the deductions evenly.
Tie the edge of the sole and the last row with a "crustacean step", tie flowers or bows for decoration.
Warm and cozy crocheted knitted slippers with diagrams and descriptions are ready. Let your legs be happy.
Be sure to watch the tutorial video:
You can also knit if you prefer this kind of needlework.
We create cozy t DIY square boxes
In the cold winter evenings Crochet slippers made of squares will keep your feet warm. This type of knitted home shoes is distinguished by the originality of the model and simplicity in execution.
Step-by-step MK with a job description
We need remnants of medium-thick threads of different colors, hook number 2.5.
Knitting density: 8.5 X 8.5 cm square.
Top of the product. We knit 4 multi-colored squares according to the pattern shown in the next photo.
For the sole, we knit 2 solid squares. It is advisable to add a nylon thread to the main threads so that the sole does not rub. The thread thickens, so knit these squares from 4 rows. Tying the 4th row of the second square, connect it to the first by making a connection. column one of the corners.
The assembly of parts takes place according to this scheme.
Place the colored square (3) on the square of the soles (1) with the wrong sides to each other and tie on both sides of st. b / n. Insert a colored square (4) into the corner formed by the sides of squares 1 and 2 of the soles, tie them on one side. Place the last colored square (6) on the square of the sole (2) with the wrong sides together and tie them on both sides, forming the heel of the slipper. Then tie the free sides of squares 2 and 4, 1 and 5 together. Fasten the knitting, cut the thread. Turn the free halves of squares 4 and 5 to the sock and tie in pairs the sides of squares 3 and 5, 3 and 4 tbsp. b / n. To arrange all the connections of the squares and the free sides with a "rachis step" strapping and that's all - crocheted slippers from squares are already asking for your feet.
Beautiful handmade footsteps using knitting needles
Footprints are knitted slippers with soft soles; they can be crocheted or crocheted. This type of home shoes looks more like a low sock. If you make them from warm, but at the same time light yarn (cashmere or mohair), then they can be put on in boots, your feet will be very warm in cold weather.
The photo shows a variant of simple tracks, crocheted... It will take only a couple of hours of your time to make them.
Master class on the implementation of such a model
For knitting, you need a yarn of medium thickness, hook number 3.Start knitting with a toe, which is knitted in a circle pattern.
Starting from the 4th row, continue knitting without increments. Finish each row with a connecting post with the first loop of the row. Knit 10 rows without increments. It turns out a "glass".
Sole. Continue knitting in straight and back rows.
15 row. 3 vp lifting, 21 st. s / n., 3 v.p. lifting. Turn the product over and knit in the opposite direction in each loop, 1 tbsp. s / n. In this way, knit 7 rows. Turn the product to the wrong side and fold it in half. Knit a row of stitches connecting the two halves. It turns out a seam on the heel. We cut the thread, turn the sled onto the front side and tie it with 2 circles of st. b / n. Decorate with snowflakes or flowers according to your taste.
Such cute footprints, tied by your hands, can be a wonderful gift for relatives and friends. Watch the video for more details.
We master d Do-it-yourself cute slippers
Every mother knows how hard it is to teach a baby to wear indoor shoes. No matter how many pairs of indoor slippers a child has, he loses them and ends up running barefoot anyway. But we can say with confidence that nice slippers, tied by the hands of your beloved mom, will become favorite for the baby. He will wear them with great pleasure and pride. Therefore, dear mothers of babies, arm yourself with a crochet and thread, carefully study our master class on making children's slippers and start creating. The description and knitting pattern proposed in this section of the article will come to your aid.
In the photo above, you can see the original children's indoor shoes for a girl. This model is quite suitable for boys, you just need to change the jewelry to a more masculine one.
Work sequence
For knitting you need yarn - 60 g, hook number 2.5.
Sole. Knit 23 vp with a dark thread. Tie a chain on both sides of Art. s / n. according to the scheme number 1, which is shown in the next photo.
To round off the edges, add 6 tbsp. s / n. from each side. We knit up to the third row according to the scheme No. 1, we cut off the thread. Continue knitting with light thread. The fourth row knit in the direction of the heel, tying the entire foot, loop into loop, (it should turn out to be 57 tbsp. S / n.). Knit the fifth and sixth rows with a dark thread according to pattern number 2, making a decrease on the toe in the sixth row.
Knit the seventh row with a white thread, making decreases according to pattern No. 2. On the eighth row, change the color of the yarn and knit according to pattern No. 2, making decreases at the toe and heel. We tie the top of Art. b / n. Cut off the thread. We knit the second slippers in the same way. All - children's slippers are crocheted and waiting for decoration.
Tie these slippers for your child and be sure - he will never forget about them and never lose. And your efforts, warmth and love, invested in the work, will protect and warm the baby's legs.
Video tutorials for beginner masters
How to correctly calculate the number of loops, choose a yarn and a hook, which model of slippers to choose? You can get answers to all these questions by watching the training video. Here the whole knitting process is shown step by step, the whole technology is explained in detail. Even the most inexperienced knitter, relying on video tutorials, will be able to cope with this task without any problems.
Ballet slippers:
Home slippers deserve to look original and unique. After all, they not only warm your leg, but also decorate it. Inspiration for you in creativity, dear knitters!
Slippers-boots:
And as you improve your skills, you will soon be able to knit not only for home, but also for publication.
Knitted home slippers are an incredibly cozy and warm piece of home clothing. It is quite easy and quick to crochet them, and the imagination in their design is limitless. As one of original options design is presented below - crochet slippers with a buckle.
For knitting home slippers, materials are required:
- light purple and dark purple yarn,
- 2 buttons to match
- hook number 4.
How to crochet slippers, master class:
If you've ever knitted, you can easily knit these in a couple of evenings.
Crochet soles of slippers
First, you need to dial with a dark purple thread a chain of air loops in the calculation: leg length minus 8 cm. I have 26 air loops.
We knit the sole in a circle, making uniform increases along the edges of the chain. We knit 4 rows with double crochet, one row is done in half with crochet and single crochet (toe and heel parts) according to this pattern:
Top of sneakers
Then we change the thread to light purple, and knit one row straight on the back wall of the loop, and two rows with decreases from the toe (first remove 4 loops, then we make decreases through the loop).
Now we fix the thread on the side and continue to carry out the toe part: in two rows we remove every second column; in the next - we knit all the columns together.
Then we knit one row round through the loop: double crochet, 1 air loop, etc.The last row is performed with dark purple thread in single crochet columns. We fix the thread.
Knitted sneaker buckles
Now we knit the buckles with a dark-colored thread: we tie a chain of 15 loops with single crochets (3 rows), making on one side increments as on the sole for rounding. The finished buckle can be crocheted with single crochet posts or with a crustacean step.
And the final moment - we tie the soles of the slippers with a dark purple thread with connecting posts, while fixing the buckles on the sides. We fix the ends of the buckles with buttons.
Knitted slippers are ready! Wear it with pleasure!
Despite the abundance of clothing and footwear of various styles, colors and brands in stores, knitting is still the favorite female pastime. This is more than a hobby! For a woman, this is relaxation, creativity, self-expression, a manifestation of love and care for loved ones and for herself. One of the most popular knitting items is footwear in different varieties and hosiery. Novice needlewomen often have a natural question of how to knit the sole, since it is with it that knitting of these products begins.
Since the outsole is that part knitted shoes, which wears out first of all, you need to carefully approach the choice of thread and pattern for it. For knitting adult slippers, a stronger thread is usually used, like a hemp rope, and for children - acrylic. To knit the sole strong, you can add synthetic thread to the knitting. A special heat-adhesive lining material will help you to give the sole extra rigidity. A rectangle is cut out of it according to the size of the foot, ironed to the sole and cut along the contour. Before tying the sole of your chosen product, you need to measure your foot. To do this, use a regular A4 sheet of paper, on which you need to circle the contour of the foot. Then you can start knitting. Shoes and hosiery can be knitted or crocheted. There are many options for knitting. Let's dwell on those that will be available to beginners.
Crocheted slippers add coziness and neatness to the house, and give its inhabitants warmth and keep them healthy. In addition, these home shoes not only save you from the cold floor, but can also perfectly cheer you up. In addition, products like crochet slippers will be a wonderful gift for the most different holidays, including New Year's. Therefore, learning to crochet slippers is a must.
Beautiful crochet slippers: diagrams and description
Crocheted slippers are not a thing of the past, as many novice knitters think! These home shoes are happily knitted in our time for the whole family, it is enough just to choose the most suitable model for everyone and an interesting knitting pattern. Beautiful and simple models of crochet slippers can be selected for girls with boys, and for women and men of the most of different ages and taste preferences. Moreover, all this can be done by novice masters.
Home slippers with felt sole
Indoor slippers should be warm first. There are several ways to insulate the soles of knitted shoes, for example, choose a ready-made dense insole and sew it to the knitted top of the slippers, or start sewing the top from the insole. We will crochet home slippers with felt soles, but you can also use leather or fur insoles. How slippers crochet on a felt sole are knitted - diagrams and descriptions will tell you how to cope with this for novice knitters.
Materials for work:
- yarn (wool or wool with acrylic) - 150 grams;
- hook - 3.5 mm;
- felt insoles.
Pattern for starting knitting sneaker:
Popular articles:
Progress:
We start knitting with a sock. The pattern can be any, the main thing is that it is convenient for adding. We knit with a crochet pattern. We make additions to the little finger, that is, 4-5 cm.
At the level of the rise, go to the sidewalls and start knitting according to the pattern. The result should be a canvas similar to the letter P. The required length is determined by attachment to the foot or insole.
Sew back seam. We do this without breaking the thread, from bottom to top in single crochet columns.
We continue to knit in a circle. The height of the sneaker can be whatever you like.
We attach the top to the sole, secure with pins for easier sewing.
Sew the top to the sole with an over-the-edge seam. Better to take a tighter thread.
When the slippers are almost ready, you can decorate it with feathers, or leave it in its original form - then you can already start wearing it.
Simple mens
Every novice knitter includes simple crochet men's slippers in the list of must-have items. It could be good gift and a pleasant sign of attention to all dear men. The description will help to knit these simple crochet slippers. Calculations are suitable for sizes 39 and 40.
Materials for work:
- yarn "Kable" (100% cotton, 430 m / 100 g) - 200 g brown;
- hook number 4.
Designations for the scheme of work:
vp- air loop;
runway- air lifting loop;
ssn- double crochet;
c2n- a column with two crochets;
ps- lush column (3 PRS together in one loop of the base);
ps2- a lush column with 2 yarns (3 c2n together in one loop of the base).
Upper part of knitted men's slippers
2 details. Knit with 3-fold yarn in lush stitches with 2 yarns.
Dial 29 runways + 3 runways (dial 3 runways in each row). Knit, expanding the knit.
1st row: in the 4th st. from the hook, knit ps2, vp, skip 1 st, ps2 and so on to the end of the row. You should get 15 ps2.
Row 2-13: knit ps2 between ps2 of the previous row, subtracting 1 ps2 in each row. There should be 2 ps2 left.
Tie the resulting triangle around the entire perimeter with 2 rows of ps2, knitting at the corners of 2 ps2 in one loop. Tie one piece for each slipper.
Sole of knitted men's slippers
4 details. Knit with a thread in two folds with lush stitches.
Dial a chain of 8 runways + 2 runways (dial 2 runways in each row). Knit, expanding the knit.
1-3 row: at the beginning and at the end of each row, add 1 ps (14);
4-12 row: knit straight;
13 row: add 1 ps at the end of the row (15);
14-16 row: knit straight;
17 row: add 1 ps at the end of the row (16);
Row 18-20: knit straight;
Row 21: add 1 ps at the end of the row (17);
22-26 row: knit straight;
27-31 row: at the beginning and at the end of each row, subtract 1 p. (7).
Tie 2 pieces for each slipper.
Fold 2 sole parts, tie around the entire perimeter with lush posts. You can insert a leather or hard insole inside.
Assembling knitted men's slippers
Sew on with a needle upper part to the sole with a blind seam. Tie a chain from VP and sew in the form of a dollar or ruble.
Beautiful of squares
Slippers made of motifs are very beautiful and original home shoes that all women of fashion in the family will wear with pleasure. Motives can be either square or polygonal. The last option will look the most original of all. How to make beautiful home crochet slippers from squares with your own hands - we will consider in detail right now.
Materials for work:
- cotton yarn like "Violet" - 150 grams;
- hook 3 mm;
- insoles;
- scissors;
- awl or thick needle.
Pattern of knitting motive:
Progress:
The yarn must be connected in two strands, and if the yarn is thin - in three. The knit should be tight so that the slippers keep their shape and are comfortable. First, we tie the insoles, which we pre-pierce with an awl, stepping back from the edge 0.5 cm.The distance between the holes is 0.5 cm.
When tying, we use single crochet posts, two in each hole. Then you need to measure the length of the tied insole around the perimeter in order to calculate the length of the motive in the future.
Important: the length of the side of the motif, multiplied by 8, should be equal to the length of the insole along the perimeter (if necessary, you can change the pattern by removing or adding rows to it).
Assembly
We collect slippers. To do this, take three ready-made motifs and sew them according to the following scheme: sew the sides marked with the number 1 with one front seam. Sew the sides marked with the number 2, getting the back seam. In the future, we will sew the sides under the number 3 to the insole. Leave the sides marked with the number 4 not sewn.
You can crochet the motifs from the outside, or use a needle and sew them on the inside - as it is more convenient for anyone.
Chip the details together with the insole with pins or sweep them by moving the nose to the right or left of the central part. This will make the right and left slippers. We tie our sneaker to the insole. We got comfortable slippers.
Women's knitted ballerinas
Femininity at home cannot be ignored! And beauty and comfort are exactly what crocheted slippers in the form of ballet flats offer. Let's consider in detail how to create women's crocheted ballet slippers with your own hands.
Dimensions:
S - 10 cm wide and 20 cm long;
M - 11 cm wide and 23 cm long;
L - 11 cm wide and 25 cm long.
Materials for work:
- 1 skein of yarn (wool, 200 m / 100 g);
- hook number 5.
Knitting method:
air p., art. b / n, conn. Art., half-st. s / n, convex st. b / n.
Group (Gr):
holding the last arcs of each loop on the hook, knit 2 tbsp. s / n, as indicated in the instructions, yarn over, pull it through all the loops on the hook.
Important:
Mark the first loop at the beginning of each circle. row, so as not to get confused in the process.
Do not sew into buttonholes. columns at the end of the circle. row.
On the sides, when the instructions tell you to knit into the upper part of the group 2 rows lower, insert the crochet under the 2 threads that arise from the upper part of the group.
Knitting density:
4 tbsp. b / n and 4 rows from st. b / n = 2.5 x 2.5 cm.
Progress:
1st row(persons.): 7 (7, 9) air. etc., knit behind the back arcs; Art. b / n in the 2nd air. from the hook and into each of the next 3 (3, 5) air. n., 2 tbsp. b / n in the next. air p., art. b / n in the next. air etc., knit from the opposite side of the air. etc., skip the last knitted air. n., 2 tbsp. b / n in the next. air p., art. b / n in each of the last 4 (4, 6) air. p., turn. ...
2nd row: 1 air. p., art. b / n in each of the first 4 (4, 6) st. b / n, (2 st. b / n in the next st. b / n, st. b / n in the next st. b / n) 2 times, 2 st. b / n in the next. Art. b / n, st. b / n in each of the last 4 (4, 6) st. b / n, turn. ...
3rd row: 1 air. p., art. b / n in each of the first 3 (3, 5) st. b / n, (2 st. b / n in the next st. b / n, st. b / n in each of the next 2 st. b / n) 3 times, 2 st. b / n in the next. Art. b / n, st. b / n in each of the last 3 (3, 5) st. b / n, turn. ...
4th row: 2 air. n., half-st. s / n in each of the tracks. 3 (3, 5) Art. b / n, (2 half-s / n in the next article b / n, half-s / n in each of the next 2 items b / n) 4 times, half-s / n. s / n in each of the last 4 (4, 6) st. b / n, turn. ...
5th row: 1 air. p., art. b / n in the first half. s / n, Gr in st. b / n 2 rows lower, skip half. s / n in this row after the group, (st. b / n in the next half-st. s / n, Gr in the next st. b / n 2 rows lower, skip half-st. s / n in this row behind Gr) 1 (1, 2) times, st. b / n in each of the tracks. 2 half s / n, (Gr in st. b / n 2 rows lower, do not skip half-st. s / n in this row behind Gr, st. b / n in each of the next 2 half-st. s / n) 2 times, (Gr in st. B / n 2 rows lower, skip half-st. S / n in this row behind Gr, st. B / n in the next half-st. S / n) 2 times, Gr in the next. Art. b / n 2 rows lower, skip half. s / n in this row behind Gr, (st. b / n in each of the next 2 half-s / n, Gr in st. b / n 2 rows lower, do not skip half-s / n behind Gr) 2 times, st. b / n in the next. halfway s / n, (Gr in st.b / n 2 rows lower, skip half-st. s / n in this row behind Gr, st. b / n in the next half-st. s / n) 2 (2, 3) times , to turn. ...
6th row: 2 air. n., half-st. s / n in each of the tracks. 5 (5, 7) p., (2 half-s / n in the next loop, half-s / n in each of the next 2 p.) 5 times, 2 half-s / n. s / n in the next. loop, half-st. s / n in each of the last 6 (6, 8) p., turn.
For sizes S and M only... At the end of the last row, fasten the thread and cut off.
For size L only... 7th row: 1 air. p., st.b / n in each loop. Cut and secure the thread.
Sole knitted slippers crochet (2 parts):
1st circle. row: 16 (20, 24) air. etc., knit behind the back arcs; 2 tbsp. b / n in the 2nd air. n. from the hook, art. b / n in each of the tracks. 4 (5, 6) air. n., half-st. s / n in each of the tracks. 3 (3, 4) air. p., art. s / n in each of the tracks. 6 (9, 11) air. n., 5 tbsp. b / n in the last air. P.; knit on the opposite side of the chain from air. n. in both remaining arcs, st. s / n in each of the tracks. 6 (9, 11) air. n., half-st. s / n in each of the tracks. 3 (3, 4) air. p., art. b / n in each of the tracks. 4 (5, 6) air. n., 2 tbsp. b / n in the last air. n., conn. Art. in the first st. b / n. ...
2nd circle. row: 1 air. n., 2 tbsp. b / n in each of the first 2 p., art. b / n in each of the tracks. 13 (17, 21) sts., Place the marker in the last knitted loop, (2 st. B / n in the next loop, st. B / n in the next loop) 2 times, 2 st. b / n in the next. loop, st. b / n in each of the tracks. 17 (21, 25) p., 2 st. b / n in each of the last 2 p., conn. Art. in the first st. b / n. ...
3rd circle. row: 1 air. n., 2 tbsp. b / n in the first loop, 2 tbsp. b / n in the next. loop, st. b / n in each loop to the marker, 2 tbsp. b / n in the next. loop, st. b / n in the next. loop, place a marker in the last knitted loop, st. b / n in the next. loop, (2 st. b / n in the next loop, st. b / n in each of the next 2 sts.) 2 times, 2 st. b / n in the next. loop, st. b / n in each loop until the last 2 sts, 2 tbsp. b / n in each of the last 2 p., conn. Art. in the first st. b / n. ...
4th circle. row: 1 air. n., 2 tbsp. b / n in each of the first 2 p., half-st. s / n in each of the tracks. 13 p., Art. s / n in each loop to the marker, 2 tbsp. b / n in the next. loop, st. b / n in the next. loop, place a marker in the last knitted loop, st. b / n in the next. loop, (2 st. b / n in the next loop, st. b / n in each of the next 2 sts.) 2 times, 2 st. b / n in the next. loop, st. s / n in each of the tracks. 13 p., Half-st. s / n in each of the tracks. 18 p., 2 tbsp. b / n in each of the last 2 p., conn. Art. in the first st. b / n. ...
Crochet side of knitted slippers
5th circle. row: 1 air. n., convex st. b / n (for the front arc) around each loop to the marker, (st.b / n in the next loop, convex st.b / n around the same loop, convex st.b / n around each of the next 2 sts. ) 3 times, Art. b / n in the next. loop, convex st. b / n around the same loop, convex st. b / n around each in a circle, conn. Art. in the first convex st. b / n.
6th circle. row: 2 air. n., half-st. s / n in each of the tracks. 25 (29, 34) p., (2 half-s / n in the next loop, half-s / n in each of the next 2 p.) 3 times, 2 half-s / n. s / n in the next. loop, half-st. s / n in each loop in a circle, conn. Art. in the 2nd of the initial 2 air. p., turn. ...
7th circle. row: 1 air. p., art. b / n in each of the first 2 sts, (st.b / n in the next loop, Gr in st. b / n 2 rows lower, skip the next loop in this row behind Gr) 16 times, (st. b / n in each of the next 2 sts, Gr in st. b / n 2 rows lower, skip the loop behind Gr in this row) 5 times, (st. b / n in the next loop, Gr in st. b / n 2 rows lower, skip the next.loop in this row behind Gr) 16 times, st. b / n in the last loop, conn. Art. in the first st. b / n, turn.
8th circle. row: 2 air. n., half-st. s / n in each loop in a circle, conn. Art. in the 2nd of the initial 2 air. p., turn.
9th circle. row: 1 air. p., art. b / n in each of the first 2 p., (st.b / n in the next loop, Gr in the top of the group 2 rows lower, skip the next loop in this row behind Gr) 16 times, (st. b / n in each of the next 2 sts, Gr in the next Gr 2 rows lower, skip the next loop in this row behind Gr) 5 times, (st.b / n in the next loop, Gr in the next Gr by 2 rows below, skip the next.loop in this row behind Gr) 16 times, st. b / n in the last loop, conn. Art. in the first st. b / n, turn.
Assembling crochet knitted slippers
The last circle. row: conn. a column in each of the first 13 (17, 22) sts, by persons. side of the lifting part, knit through both layers, conn. column in the first loop at the right edge of the lift part and in the next. loop on the sidewall at the same time, (connecting st. in the next loop on the lifting part and the sidewall) repeat until the lifting part is connected completely to the sides and toe, continue to knit the connection. posts in each loop around the sidewalls, conn. Art. in the first connection Art. Cut the thread and secure.
Crochet slippers - video
Another popular type of home slippers crochet are footprints. They are knitted in the image of the now popular socks, and as a result they are light and neat, while performing the main function of keeping your feet warm. To make it easier for beginner knitters to understand the intricacies of knitting footprints, it is worth watching a video master class before starting work.
How to crochet slippers - for beginners video:
Master class - crochet children's slippers
Crochet slippers are especially popular among children. You can link several different models so that boys and girls don't get bored wearing them - it's easy to do and it won't take long. But it will bring joy to everyone: both the mother, who will be sure that the children's feet are warm, and the children, who will be happy to put on bright funny slippers.
Children's slippers can be crocheted not only in the traditional way. There are many interesting models of slippers for children, reminiscent of sneakers, boots, ugg boots, slippers, sandals, ballet flats, socks and much more. You can always please your child with voluminous stripes on slippers with animals, like bunnies, or with your favorite cartoon characters, like minions. But first of all, you should take care of convenience - that is, choose suitable for the child model of slippers, and only then grab the hook.
A master class on crocheting children's slippers will help to understand the intricacies of knitting models of room shoes for boys and girls.
Openwork knitting for girls
Any girl will love these beautiful crochet laced slippers. For example, you can choose a model in the form of summer light ballet flats so that crocheting slippers for a girl turns into interesting activity and for the knitter.
Dimensions:
32/33-34/35-36/37-38/39-40/41.
Outsole length:
20-21-22.5-23.5-25.5 cm (after the first wear, ballet flats are stretched by 1-1.5 cm).
Materials for work:
- 150-150-200-200-200 g of Schachenmayr SMC Catania Grande purple yarn (100% cotton, 180 m / 50 g);
- hook number 5.
Knitting the main pattern:
Art. b / n and st. s / n. If there are no other instructions, perform according to 1 tbsp. b / n or 1 tbsp. s / n in 1 p. of the previous p.
Doubling the loop:
perform 2 tbsp. b / n in 1 p. of the previous p.
Knitting density, b / n columns:
17 p. And 18 p. = 10 x 10 cm.
Progress:
The outsole knits from heel to toe. Tie a chain of 6-6-6-7-7 air. p. and knit st. b / n, perform the 1st Art. b / n in the 2nd air. p. from the hook = 5-5-5-6-6 p. Each p. start with 1 air. n. lifting and 1 n. in the last item of the previous p. Air n. lifting in the following rivers. not knitted. In both the next p. double the 1st and last p. = 9-9-9-10-10 p. In the 9-9-10-10-11th p. double the 5th p. = 10-10-10-11-11 p. At 17-19-21-23-25 r. and then 2 times in every 2nd p. double the 1st and last p. = 16-16-16-17-17 p. At 31-33-35-39-41 r. knit the first 2 and last 2 sts of the row together. Repeat these reductions 3 more times in each p. = 8-8-8-9-9 p. After 34-36-38-40-44th p. turn the work and tie the sole 1 in a circular p. Art. b / n and close the circular river. 1 conn. Art. = 80-84-88-94-102 p., Mark 4-4-4-5-5-th p. And 44-46-48-52-56-th p.
Start the upper part with a new thread on the left side of the sole at 16-17-17-18-18th p. and knit art. s / n circular p., instead of the 1st st. s / n knit 2 air. n. lifting and close the circular p. 1 conn. Art. In the 1st circular river. introduce a hook for art. b / n soles so that the links of st. b / n. This circular river. knit very tight. Then turn the work and continue to knit st. s / n. Knit to 8-8-8-10-10 sts before the marked sts on the toe, knit 8-8-8-10-10 x 2 tbsp. s / n together, then knit st. s / n, close the circular river. 1 conn. Art. = 72-76-80-84-92 p.
Turn the work and on the first 37-39-39-42-42 sts knit the heel with straight and reverse p., Skip the rest of the sts. * Perform 2 air. p. rise, skip 2 p. of the previous p., both next st. s / n knit together, marked with Art. s / n on the heel, knit together with the next st. s / n together, knit until the 4th st. s / n from the end, knit 2 x 2 tbsp. s / n together, turn work. Repeat from * 2 more times = 22-24-24-27-27 p. Total heel height = 5 p.
For a flower, tie a chain of 5 air. n. and close in a ring 1 connection. Art. Run the 2nd and 3rd circular p. scheme. In the 4th circular river. perform for the arches of the first 2 air. item 5 of Art. b / n, for the arches of the other 6 air. n. to combine a flower with a ballet. To do this, from the marked loop on the toe, count 16 points to the right side of the ballet flats and connect the flower with 1 tbsp. b / n with this loop (see the arrow on the diagram). Then behind the arch of each air. p. execute 5 tbsp. b / n, insert the hook behind the air arch. n. and in the corresponding item ballet shoes. The beginning of the circular river. flower also combine with ballet flats 1 tbsp. b / n. Then, on the straight edge and bevel of the heel, knit st. b / n. For the 1st tie, tie a chain of 27-28-29-30-31 air. etc. and tie st. b / n. Next, knit art. b / n on the back edge of the heel, tie the 2nd tie in the same way, tie the bevel of the heel and the straight edge to the flower with st. b / n.
Sneakers for a boy
Active young man you can knit slippers in the form of sneakers. Such a youth accessory will not only be happy to be used daily for its intended purpose, but also reliably protect the boy's legs from the cold floor. So, let's look at how to crochet slippers for a boy.
The size:
Materials for work:
- semi-woolen yarn of average thickness 150 g black and 50 g white;
- hook number 3;
- the laces are white.
Progress:
We start knitting with white thread.
Connect 5 air loops in a ring with a connecting loop.
3 lifting loops, 14 double crochet stitches in a ring, connecting loop.
3 lifting loops, 2 double crochets to the underlying column, 1 double crochet to the underlying column (so we knit, alternating to the end).
3 lifting loops, 42 double crochets, connecting loop.
Now we knit with a black thread. 3 lifting loops. 42 double crochets. So we knit 5 rows.
Knitting tongue
3 lifting loops, 13 double crochets.
So we knit 14 rows.
Knitting the main part
Attach a thread to the side of the tongue and knit like this:
3 lifting loops and in the same loop 1 double crochet, 29 double crochet, 2 double crochet loop of the underlying column.
3 lifting loops, 32 double crochets.
3 lifting loops and 1 double crochet in one loop, 31 double crochets, 2 double crochets in one loop.
3 lifting loops, 34 double crochets.
3 lifting loops and 1 double crochet in one loop, 33 double crochets, 2 double crochets in one loop.
3 lifting loops, 36 double crochets.
3 lifting loops and 1 double crochet in one loop, 35 double crochets, 2 double crochets in one loop.
3 lifting loops, 38 double crochets.
3 lifting loops and 1 double crochet in one loop, 37 double crochets, 2 double crochets in one loop.
3 lifting loops, 40 double crochets.
- We knit 18 rows like 10 rows.
Decor
We knit with a white thread.
Connect 4 air loops in a circle.
3 lifting loops, 14 double crochet stitches in a circle, connecting loop.
3 lifting loops, 2 columns with a crochet in each underlying column, connecting loop.
We knit 2 such parts.
Assembly
Sew back. Tie the edges of the main part with single crochet stitches. Sew the decor onto the outer sides of the product. Lace up and “sneakers” are ready.