Snowman with his own hands. Master class with step by step photos

New Year's decoration of the interior with your own hands

Master class "Snowman from a stocking"

Author: Bulankina Tamara Alexandrovna, teacher of the combined type of kindergarten No. 27 of Armavir.
snowman
Come on buddy, be brave buddy
Roll your snowball in the snow.
It will turn into a snowball
And it will become a snowman.
His smile is so bright!
Two eyes, a hat, a nose, a broom.
But the sun will bake a little -
Alas! - and no snowman.
V. Egorov

Target: make a gift, do-it-yourself interior decoration.
The master class will be of interest to educators, parents and teachers, to everyone who is fond of needlework.
I was inspired by the picture among the illustrations on the New Year theme for the craft. I decided to try to recreate what I saw, but it turned out to be a completely different snowman, but so dear (after all, the stocking was mine). The toy is very amusing: quite mobile, depending on how you turn it, the mood of the snowman also changes. The toy will definitely not leave children indifferent (checked), as a souvenir and for interior decoration for the new year, it will be very useful.
For work you will need: golf or part of pantyhose white color(the smaller the den, the better), synthetic winterizer or cotton wool, thread, needle, scissors, viscose napkins or pieces of fabric that does not fray, ready-made eyes or beads, a glue gun and ... a good mood.

1. Take a white golf and fill it with synthetic winterizer, not very tight. You should get an oblong figure, tie it into a knot from below. Cut the elastic band and cut it in half across

2.We make pens. Turn out the halves of the elastic band so that the seam is not visible, fill with padding polyester

3. Cut out mittens from napkins or fabric, sew with a decorative seam and put on the handles

4.Let's take the legs. Cut out legs - paws from thick cardboard (rectangle 10 by 12 cm) and put the cardboard into a sewn bag made of fabric of the same shape and size

On the one hand, which was left unsewn, we put a filler - synthetic winterizer and sew it up.

5. And now the most important thing - head. Form a head at the top of the golf course and pull it with a thread.

6. We cut a cap from fabric to the size of the head (from a rectangle 20 by 15 cm), sew it and decorate it along the edge with a contrasting fabric and attach a bubo to the edge of the cap

Cut out a scarf

Attach a hat and scarf

7. Sew on the handles

from an orange napkin or fabric we sew a nose-carrot

8. Sew on the snowman's legs

Glue the eyes and embroider the mouth. Snowman is ready!

May the New Year fulfill your most cherished desires!

Today, many are interested in the question of New Year's crafts with their own hands. So, making a snowman and surprising everyone is real. Craft from a snowman will extend good New Year spirit for a few months and decorate the house. If the snowman is small, then it can be hung on a Christmas tree. When a snowman is of solid size, they put him on skis, give him sticks in his hands, and he proudly stands on the table.

The snowman can be dressed in different ways at your discretion. He smiles and stands on skis with a bag of presents on his back. Thanks to step by step wizard it is not difficult for the class to sew it. This type of handicraft is called stocking doll. Now this technique is experiencing a real boom. After all, a hand-sewn doll brings good luck to the house.

Quick master class - how to make a snowman with your own hands

You will need the following materials and tools:

• White tights 20 - 40 den and a piece of orange nylon
• Sintepon Standard 150 - 250 g / m2
• Reinforced threads 35 LL or polyester 40/2 Gamma or Bestex
• Doll needles, pins
• Colorless nail polish
• Copper wire with a diameter of 1.5 mm and a length of 0.6 meters
• Fleece any color
• Piece of white fur
• Linen plumbing
• Eyes with a diameter of 21 mm
• Dry cosmetics: shadows, blush
• Strong hold hairspray
• Thick cardboard A4 (2 sheets) and corrugated cardboard
• Tape - brown ribbon
• Paper clip
• 2 bamboo sticks
• piece of twine
• Christmas tinsel
• Bell or bell
• Scissors
• Pliers
• Glue gun and sticks
• Tweezers
• Black CD marker

Step 1 Snowman Head

• 1. Separate a thin layer from a common piece of synthetic winterizer and lay it on the table with the fluffy side down.
• 2. Insert the workpiece into the nylon pipe and add two synthetic winterizer balls for the cheeks. Fasten the fabric with a thread, cut off the excess from the bottom with scissors.
• 3. Above one of the cheeks, enter the needle at point 1 and lower yourself to point 2, under the cheek.

• 4. From point 2 return to point 1.
• 5. And again go to point 2 to secure the tightening.
• 6. From point 2, lay the thread over the capron to point 3, enter it and exit at point 4. Pull the thread well, forming a mouth; point 3 and point 4 are symmetrical, respectively, point 1 and point 2.
• 7. From point 4 go to point 3.
• 8. For a more textured mouth from point 3, make a small stitch to point 5 and enter it.
• 9. And go to point 1, pull the thread.
• 10. From point 1, descend to point 2.
• 11. Stitch up to point 6, enter it with a needle.
• 12. And exit at point 4.

• 13. From point 4 go down
• 14. To point 7 near the lower node. Fasten the thread.
• 15. Drag a place for a nose - carrots. To do this, rise from point 7 to point 8.
• 16. Stitch up to point 9 and enter point 9.
• 19. Make a small stitch up to point 10 and enter it.
• 20. And again go down to point 7.
• 21. From point 7 rise to point 10.

• 22. Stitch up to point 8 and enter point 8.
• 23. And go to point 7, where you finally pull and fasten the thread.
• 24. Pull the peephole attachment point. From point 7, rise to point 11 in the area of ​​\u200b\u200bthe future eye sockets.
• 25. Stitch from point 11 to point 12 and return to point 7, tighten the thread well.
• 26. Then go up to point 13.
• 27. Stitch left to point 14 and enter it.
• 28. And exit at point 7.
• 29. Where to finally tighten the thread and secure it.
• 30. Finally fasten the nylon from above with a thread, cut off the excess nylon with scissors.

• 31. Apply dry makeup to the doll's face, working with shadows on the corners of the mouth, and with pink blush on the cheeks and chin. With dark terracotta blush, paint the lower lip and set the makeup by covering the face with strong hold hairspray twice.

• 32. Choose suitable eyes for the image of your doll and use pliers to bite off the thread. On the reverse side apply glue with a hot gun and stick them in place.
• 33. For the nose - carrots, tightly roll the synthetic winterizer with a cone 3.5 cm long, cut off the fluffy end with scissors. Wrap the workpiece with orange nylon folded in half and secure it with a thread. Do not cut the thread.
• 34. Enter the needle into the previously drawn-in place for the spout.
• 35. And bring it out at the back of the head.
• 36. Apply glue from a hot gun around the knot, put your nose in place and pull the thread well. Wait for the nose to stick.
• 37. Cut off the excess thread with scissors. Use a marker to draw dashes, imitating real carrots.

Step 2 Snowman Body

• 38. From the padding polyester, form a blank for the body with a diameter of 10 - 11 cm and wrap it with a piece of nylon, which is secured with a thread. Cut off excess fabric with scissors.
• 39. Try on the head to the body to determine the size. If everything suits you, then sew the head to the body in a circle twice.
• 40. For feet, roll up the sintepon rollers. Wrap with nylon and secure with thread. Cut off excess fabric with scissors.
• 41. On the finished feet of the snowman, apply glue from a hot gun and glue to the bottom of the body.
• 42. Further work on the feet and body. Enter the needle at point 14 and leave the end of the thread free.
• 43. And go up to point 15 - this is the place where the handles are attached.

• 44. From point 15
• 45. Get down to point 16
• 46. ​​Where tie both threads in a knot. Then cut off the excess with scissors.
• 47. Similarly, pull the second foot.
• 48. For handles, bend the copper wire frame and sew on sewing machine two thin pantyhose pipes (you can use your hands).
• 49. Wrap the frame with a thin strip of synthetic winterizer and put on nylon blanks.
• 50. From above, nylon collect on a thread.
• 51. Fold a small piece of fleece in half, cut out a blank for a mitten.
• 52. And stitch it on a typewriter. Unscrew with tweezers. Put mittens on the handles to keep the snowman warm and secure with a few drops of glue from a hot gun.

• 53. Wrap a thin strip of fur around the mittens and secure it, thus making the edge.
• 54. Finished handles attach to the body and sew or secure with a glue gun. The snowman smiles and is already pleased.

Step 3. Hat and bangs

• 55. For the hat, take a sheet of cardboard and cut out three blanks.
• 56. Glue the rectangular blank in the form of a cylinder, the diameter of which should be 2 mm less than the inner diameter of the ring.
• 57. Next, glue all the blanks with any floral fleece and then assemble them into a hat with a glue gun. To do this, put the circle on the cylinder and apply glue.
• 58. Then pull the brim of the hat to the very edge.

• 59. Glue the bottom of the hat on top.
• 60. With your hands, bend the finished hat in different places, giving it a crumpled look. Try on a hat for a snowman.
• 61. And glue the ribbon.
• 62. For bangs, take a piece of sanitary flax and apply a strip of glue on it. Allow the glue to cool slightly and squeeze the fibers together with your fingers. Cut the linen with scissors at the place of gluing.
• 63. Glue the finished bangs to the head, and fasten the hat on top. Additionally, decorate the hat with bells, bells. bows and other decorations.
• 64. Glue small buttons on the snowman's tummy.

Our snowman is ready.

Step 4. Skis and herringbone

• 65. For skis, cut out four identical blanks: two from corrugated cardboard and two from thick cardboard.
• 66. Unfold a paper clip and bend it so that it forms an angle at the top.
• 67. Attach it to the cardboard blank and secure with a glue gun.
• 68. Place and glue a thick cardboard blank on top.
• 69. While the glue has not dried, bend the sharp end of the ski. Make the second ski in the same way. Finished skis can be painted with paint. To give them a realistic look, stick a self-adhesive film under the tree on them. Glue the skis to the snowman's feet.
• 70. For ski poles, take two bamboo skewers and cut out two circles from corrugated cardboard. Cut the sticks to the desired length and put mugs on them.
• 71. For the wrist strap, take a small piece of twine. Make a loop of such a diameter that it is worn on a mitten. Fix it on a stick with glue, then make a few turns down. Secure the rope with glue.

• 72. Similarly, make the second ski pole. Put the straps on your mittens. The snowman smiles again and is pleased.
• 73. Cut a scarf out of fleece.
• 74. Tie it around the snowman's neck.
• 75. To make a small Christmas tree, you will need copper wire diameter 1.5 mm, Christmas tinsel, pliers and teip - tape Brown color. Make a loop at the end of the wire, insert the tip of the tinsel into it and squeeze the wire well with pliers.
• 76. Wind the tinsel on the wire, cut the desired length of the tinsel and fix the other end with glue.
• 77. top bend the wire with tinsel with a cone, and bite off the excess with pliers.

• 78. Bend the wire, as in the photo.
• 79. Wrap a straight section of teip with tape, thus obtaining a Christmas tree trunk.
• 80. Fasten the finished Christmas tree in a bag on the snowman's back. For the bag, cut a small circle of red fleece, gather its edge onto a thread and pull it off a little. Put a small piece of synthetic winterizer inside, inject hot glue from the gun into the same place and immediately insert the trunk of the Christmas tree. Let the glue cool. Then cut two thin strips of fleece for the straps, wrap them around the handles and fasten to your back. Glue a bag with a Christmas tree on top.
• 81. The snowman on skis is ready!
• 82. According to the same master class, you can make a snowman girl.

Thus, a wonderful appeared in your house new year friend made by hand.

On the eve of New Year holidays Build an adorable snowman out of scrap materials that I'm sure every home will have.

Such a cute snowman can be placed under the Christmas tree, decorate the Christmas table with it, or give it to your loved ones as a small present.

1. children's tights with lurex thread;
2. strong white threads;
3. sewing needle and beading needle;
4. fishing line;
5. decorative ribbon of olive shades 1 cm wide - about 1 meter;
6. 4 large white beads;
7. 2 half beads;
8. large round bead;
9. small red beads;
10. plastic snowflakes of different colors;
11. black, white and gray lacquer;
12. a piece of red ribbon about 20 cm long;
13. white threads for knitting;
14. silver sequins;
15. a small piece of curtains with embroidery;
16. cotton wool;
17. a piece of cardboard measuring 10x10 cm;
18. PVA glue and Dragon glue;
19. thin wire.

The process of doing work

Step 1: make balls from pantyhose and cotton

We take children's tights and cut off one side of them: one long golf should be obtained. We tie the end of the golf with threads.

We roll a ball from cotton wool and put it in golf. We tie a knot with threads, forming the first ball from golf and cotton wool. This will be the head of the snowman.

Again we take a piece of cotton wool approximately 2 times larger than the previous one and roll a ball out of it with our hands. We push the ball into the golf. We tie the end of the golf with threads. This will be the body of the snowman.

We take a large piece of cotton wool and again twist a ball out of it. We make sure that this ball is the largest and, at the same time, harmoniously fits into the image of a snowman. We tie the end of the third ball with threads. This will be the bottom of the snowman.

Step 2: Sewing the Snowman

We cut lower part golf. We sew the upper ball with the middle ball with threads, forming a stable and symmetrical figure from the craft.

In the same way, with a needle and thread, we hem the middle ball with the bottom one. You should end up with such a cute figure.

Step 3: Making the Handles

From a thin wire we twist two identical pieces about 10 cm long. Of course, you can take a thick wire, and then you don’t need to twist it anymore, but just take 2 identical pieces of 10 cm each. But I only had a thin wire, and I twisted it in several layers.

We cut off two identical pieces of fabric from the tights along the length of the wire. Leave gaps on the fabric for hemming.

Fold the fabric in half wrong side up. Sew pieces of fabric with a needle and thread. At the bottom, we narrow the seam, making it rounded. Turn the fabric right side out.

We take two long pieces of cotton wool and wrap them around the wire. Then we dip our palms in PVA glue and again twist the wire with cotton wool in our palms. After this procedure, cotton wool will better stick to the wire.

We put the wire with cotton wool into the fabric blanks for the handles. We sew handles to the snowman. Thanks to the wire, we can fold the snowman's arms in any way that suits us.

Step 4: Making the Snowman's Face

We sew two white semi-beads to the top ball of the snowman. In the middle we sew a large bead in the form of a spout. We sew the snowman's mouth with red beads, forming a smile.

We paint over the eyes and nose with black varnish. On the eyes we draw an iris with gray varnish, and on the nose we put a dot with white varnish, forming a highlight.

On the eyes we put black dots in the middle - pupils, and put highlights with white varnish.

Step 5: sew a hat

Cut off a piece of old curtains the width of the snowman's head. Sew a decorative ribbon to the curtain.

Sew the fabric into a tube and cut off the excess. We sew the top of the fabric, forming a hat.

We take a white woolen thread and twist it between two fingers. Tie a knot in the middle and cut the thread. We cut the twisted threads at the ends and form a pompom out of the craft. With scissors, cut off protruding and broken threads from the pompom.

Sew the pompom to the hat and put it on the snowman.

Step 6: make a vest and decorate the middle

From the old curtains cut off a piece of fabric with embroidery. The dimensions of the fabric should correspond to the width and length of the middle part of the snowman. We cut holes in the fabric for the handles.

We sew the fabric around the perimeter with decorative tape. Then we sheathe decorative tape holes for handles.

Sew 4 large white beads in the center of the middle part of the snowman. We put on a vest on a snowman. With a needle and thread, we sew the ends of the vest in the lower part in the middle.

Take a thin red ribbon and tie it around the snowman's neck 2 times. We tie the ends of the ribbon in the form of a tie.

Step 7: sew on the legs

From a piece of tights cut off two small identical pieces. Fold them in half wrong side up and sew. Cut off the excess fabric.

Turn the stitched pieces right side out. We twist two pieces of cotton wool in our fingers and put them inside the sewn bags. Sew the legs to the snowman.

Step 8: make the bottom

From a piece of cardboard we cut a piece measuring 10x10 cm. Using a glass or a reel for fishing line, draw a circle on the cardboard and cut it out.

Over the entire area of ​​\u200b\u200bthe circle we glue cotton wool on it. We leave the craft for a while to dry.

We nicely form a kind of “nest” for a snowman from cotton wool. We glue the snowman to the cotton wool with the Dragon glue.

Dip a thin brush into PVA glue. Then we dip the brush with glue in silver sparkles and cover all the protruding parts of the cotton wool with sparkles.

Glue plastic snowflakes of different colors on the bottom of the snowman.

Our snowman is ready!

Good luck to everyone, create and be inspired. Happy holidays to you!

Today another master class:

Would need:

- white nylon socks;

- a spool of white and red threads;

- bright sock for clothes;

- needle, hook;

- red threads for knitting;

- filler, for example, synthetic winterizer, you can cut an unnecessary children's jacket;

- red nose paper, super glue;

- buttons;

- satin ribbons;

- scissors;

- ready-made eyes, you can buy in needlework stores;

- a piece of cardboard for the stand.

Manufacturing:

Big snowman from a nylon sock in bright clothes

1. Cut off the edge of the sock, tighten the other edge with a thread. Inside we put a circle cut out of cardboard.

2. We fill the sock with filler, wrap the edge with a thread, tear off the thread.

3. We drag the body of the snowman in two places with a thread, tear off the thread.

4. Cut off the edge of the bright sock, tuck it, sew it with hidden stitches to the snowman's head. It turned out a hat, on the side you can glue the finished flower.

Glue the finished eyes, embroider the mouth with red threads. From a piece of red paper we fold a small cone for the spout, glue it. We apply blush on the cheeks.

We cut off a piece of the sock, put it on the body, sew the bottom with hidden stitches. We fix the waist and neck with satin ribbons.

We put a filler into a piece of nylon, wrap it with a thread, cut off the thread, we get a handle. Ready to sew the handles to the body of the snowman.

We glue or sew small buttons on the sweater of the toy.

A small snowman from a nylon sock in knitted clothes

1. Cut off a little more than half nylon sock, we tighten the bottom, inside - a cardboard circle, fill it with filler, tie it. We knit a scarf from red threads.

To do this, we knit 20 air loops, 2 loops for lifting, knit a double crochet in each loop, fasten the thread, cut it off. It turned out a bright cute scarf, we tie it around the neck.

2. In order to knit a hat for a snowman, we knit 16 air loops, close in a circle, knit in a circle 2 rows with double crochets, at the beginning of each row 2 air loops for lifting.

3, 4 row - single crochet in every second loop of the base, tighten the remaining loops. it turned out a hat, we put it on the head of a snowman, you can sew it with hidden stitches so that it does not fall off.

3. Glue the eyes.

4. Glue the nose, draw the cheeks.

For handles made of narrow satin ribbon crochet 20 air loops. On the extreme air loops we knit 6-7 air loops with red yarn, we break the thread, we fix it. Fold the red mitten in half and sew with blind stitches. We sew the handles to the neck of the snowman, we tie a scarf on top.

A couple of snowmen near the Christmas tree