Perhaps you will find it useful for crafts and such a master class or video tutorial origami from modules eternal flame on may 9... Everything here is a beautiful star and a fire without anything. The eternal flame is not a monument.

We stock up on colored paper and waste. Ogrigami is a complex technique and making origami the Eternal Flame with your own hands is not an easy task. But on the other hand, how nice it is to present such a masterpiece for the holiday on May 9!

You can try the following way to make Eternal flame.

Or, according to the scheme, you can make such an origami craft Eternal flame.



Take 105 yellow triangular modules,

60 orange triangular modules.

35 red triangular modules.

The modules should be 1/32 of the landscape sheet, the color of the star can be solid.

Two rows of orange modules. A total of 30 modules in one row, the chain of modules closes into a ring.





Let's start assembling the first ray of the star.

In the first row there are 6 yellow modules.

In the second row there are 5 yellow modules.

In the third row there are 4 yellow ones and in each next circle there is 1 module less. At the end there should be one module left.











Collect 4 more beams for a full star.



Build fire.

Only three rows. Each row has 9 red modules.

The assembled three rows must be turned out so that the star looks towards us with the short sides of the modules.

Tie or glue the modules so that they do not fall apart. After complete drying, we add eight modules in places to make it look like tongues of flame.





Origami Eternal flame assembled.



In technology modular origami you can do any crafts with your own hands. In this technique ready product assembled from separate paper blanks - modules that are superimposed one on top of the other.

To collect the craft eternal flame from modules, you must first prepare the modules and find the assembly diagram, then proceed with the assembly.

To make an eternal flame one must show a star and also fire.

Let's make an eternal flame craft from origami modules:



For this craft, you need modules of white, yellow and of blue color 25, 25 and 75 pieces, respectively.

First, let's make the modules:



We look at the assembly technique in stages:





Add each color one at a time:



Then you need to fix the extreme modules together to get a ring:



We continue assembling, making rays.

1st row - blue module plus three red plus blue module (five modules together), 2nd row - one blue, two red, one blue (together 4), 3rd row - blue, red, blue (total 3 pieces of modules), 4th row - a pair of blue modules, 5th row - take the blue module, attach the blue module to it. We fix red modules between the beams.



Fire can be made by stitching red modules together or by taking paper and cutting a flame out of it.

Wonderful creativity!

And here I propose to you to make such an eternal fire with tongues of flame.



We swami will need materials for work: 9 sheets of orange paper, 6 sheets of beige paper, 4 sheets of red paper and 5 sheets of yellow paper.

From the tools we need: stationery knife or scissors (at your discretion).

In total we need 90 beige modules, 130 orange modules, 55 red modules and 70 yellow modules.

We collect the first and second rows of our five-pointed star, 10 beige modules each. It should look like this



We proceed to the third row, here we need to add 10 modules, in total we get 20 beige modules. At each corner of the module of the previous row, we put one pocket on the module of our third row.



Our star has five rays in total. We collect each beam separately, in this way: the fourth row is 4 modules in total, the fifth row is 3 modules, the sixth row is 2 modules and the seventh row is only 1 module. We make the entire beam with beige modules. It should look like this



We collect the rest of the rays in the same way. Each process is not shown separately. But in general it should look like this:



Now we will surround each ray along the edge with orange modules. It will take us 9 modules for each beam. Attention, we put the orange modules upside down. Like this



We make another row of orange modules. We have 10 orange modules for each beam.

For the first row of fire, we need 20 red modules. Modules must be inserted with their pockets facing up.



The second row is again 20 red modules.



We cover each tongue of our flame with 7 orange modules.



All five of our flames will be different lengths, so we need a different number of yellow modules, and we will still collect them in different ways. For the first tongue, we need 35 yellow modules.



The next second flame is made from 8 yellow modules



The third tongue of our flame, we are already making them 13 yellow modules



The fourth tongue of flame will be with you from 9 yellow modules



The fifth flame of 5 yellow modules.

All our Eternal Flame is ready



The modules themselves resemble tongues of flame, so it will be quite easy to make an eternal flame out of them - it is important to choose colors with transitions so that the craft does not look `` blind '', as well as something to follow detailed instructions, which can be found here on this site. Or here it is.



I suggest to look

video how it is very simple to make an eternal flame. It can easily be done by a preschooler with a little help from parents or a younger student. After all, such tasks for Victory Day or Defender of the Fatherland Day are often given to children.

And one more video

For this we need multi-colored paper.

The origami technique is crafts using paper without the use of scissors.

The Eternal Flame craft paper folding pattern is shown below.



For the main one, we take green paper. The fire will be multi-colored - yellow and red





The eternal flame can be made from origami modules in many variations and shapes. Before starting work, you need to consider the options finished works, already taken by many authors with the kindly posted results in the form of photographs, on the network.

All crafts consist of the following modules:



We add the resulting modules like this, in a circle:



By adding rows we get a big star:



As a result, we get this kind of craft:



In addition, the finished product may look like this:



How to make such an Eternal Flame in your hand, a torch, you can see and read in more detail in the question on BV here.



Here is such original craft almost entirely made of orange paper. Very, in my opinion, looks good.



Another idea to make a star out of blue paper.



But such a modular origami was made by a very patient and diligent author.



And here is a very beautiful combination of colors and shades.



And you can make a somewhat simplified, stylized in form, product, for example, like this:

If you still at school and in the summer on vacation were making crafts, for example, from candy wrappers (the so-called snakes), then it will not be difficult for you to deal with this task of making the Eternal Flame by May 9 or February 23. Remember, there are more challenging tasks. For example, you can again make a whole portrait of a Red Army soldier from origami modules.



If you want to practice first and just draw the Eternal Flame with a simple pencil, then the following video will help you with this:

And at the end of my answer, I would like to draw your attention in more detail to how to correctly make origami modules from paper.

This is how a triangular module looks and turns out:



The module can also be folded out of plain paper:



In the end, you should get this, different colors and in a large number, for the convenience of work:



If it is not clear, then we look carefully again:



And in the end, if you want to decorate the finished gift with letters and numbers, as well as a drawing, then my next video with the simplest example of a drawing, accessible in its complexity, even to an inexperienced, novice artist, will help you with this.

Read more about all the ideas of preparation and preparation for the holiday in the question on BV here.



I propose a simpler version using the origami technique.

We bend the resulting triangle in half, it should look like this:



Now we insert the resulting parts into each other.



From toothpicks and corrugated paper making flowers. If necessary, coat with glue.

We collect everything and the Eternal Flame is ready!

The eternal memory of all the soldiers who fell victim to the Great Patriotic War is symbolized by Eternal flame.

For origami Eternal flame you need yellow (105 pieces), orange (60 pieces) and red (35 pieces) triangular modules... The size of the modules is 1/32 of an A4 sheet, you can make more.



The first 2 rows are made of orange modules (30 modules in each row), assembled in a chain, connected in a ring.



Then the first ray of the star is collected, for which the 1st row is made of 6 yellow modules,

2nd row - out of 5, with each row decreasing the number by 1 module until only one remains.





The remaining 4 beams are collected in the same way.



Now you can start assembling the fire. 3 rows are made of red modules (9 pieces in a row), then these 3 rows are turned inside out so that the short sides of the modules turn towards you.



To secure the structure, the modules can be glued together. After the glue dries, you need to add 8 more modules selectively in a circle, forming a flame tongues.

Almost all children love to do something with their own hands. it is important to encourage such a desire, because crafts develop the imagination, fine motor skills are trained during the creative process, various skills and abilities are acquired. The article will focus on crafts from various materials.

Crafts from various materials can be done by any child. The task of parents is to interest the baby and provide him with everything necessary for creativity.

Crafts for May 9 from paper: tank, plane, carnation, star

By May 9, a tank made of paper is perfect as a gift for your grandfather or dad. Despite its fragility, such a craft is not inferior to other materials in terms of realism.

Moreover, paper requires attention and perseverance, so that sometimes it is more difficult to make a model from paper, and not from other materials.

A colored paper tank won't take much materials or time from you. You will need colored paper, ruler, pencil, scissors and PVA glue.

• Make 2 rings from strips of colored paper (3cm wide, 22cm long). These will be the tracks of the tank.
• Cut out a rectangle 8X14cm. Draw lines, departing from both edges by 0.5 cm. Draw 2 more lines from these lines, retreating 3 cm to the center of the rectangle. Bend the shape along the lines
• Make a model similar to the previous one. Take a rectangle 8x10cm and mark the lines, retreating by 0.5cm and 2cm, bend
• Make a triangular muzzle

You can build a tank from materials that are found in almost every home - from toilet paper rolls (3 pcs.) Or from a foil tube.

1. Cut the foil tube into 3 equal parts or take 3 rolls of toilet paper
2. Glue them sides or wrap with tape
3. Make a blank for the tower. You can paste over a suitable box or fold a cardboard layout
4. Glue the base and on the sides glue strips of corrugated cardboard - caterpillars
5. Connect tower and base
6. You can make a muzzle from a juice straw, rolled paper, or even a pen.

It will take very little time to make a tank out of corrugated cardboard. To do this, you will need: corrugated cardboard of different colors, scissors and glue.

• Cut into long strips 1cm wide
• Twist the dark stripes in a circle. Make 4 small wheels (from one strip) and 4 large ones (glue the two strips before winding)
• Glue 4 wheels to the green strip - 2 large and 2 small on the sides
• Coat the strip with glue and wind it around the wheels in several layers
• Make a rectangular platform and glue the tracks to it

Craft - a tank by May 9

• On top of the base, glue dark stripes 1.5 cm wide
• Twist the tank tower from 4-5 strips glued together
• Complete details - fuel tanks and muzzle

A lot more complicated technique origami. In order to make such a tank, first figure out the scheme yourself, and then explain it to your child.

• Fold A4 sheet in half and mark fold lines with all corners

• Fold on both sides along fold lines and smooth

• Fold in the middle from the sides
• Next, divide the sheets bent in the middle in half and bend to the outside

• Bend the corners of one of the triangles to the top and turn the workpiece

• Divide the workpiece into three parts and along these lines, first bend the edge with the folded ends, the second on top

• In an untouched triangle, fold the ends inward.

• Connect the corners by sticking the ends into the pockets formed.

How to assemble a paper tank?

• Make a barrel and stick it in the tower
• You can paint the resulting tank

Even the smallest designers can make an airplane from paper and a matchbox. In addition, such a craft will take very little time.

• From colored paper or cardboard, cut 2 strips to the width of the matchbox
• Cut a long thin strip and fold it in half, glue the edges to the matchbox
• Make a tail out of two small strips. Round off one strip and insert into the fold of the part glued to the box. Glue the second small strip on top, having previously folded it into a triangle
• Round off the wide stripes and glue the top and bottom of the box

Surely you remember the glider planes that flew around the classroom when you were in school. I suggest you a few simple schemes how to fold a glider plane.

Or try a more complex scheme:

Crafts from dough and plasticine by May 9: tank, plane

Children love to sculpt from plasticine. So why not immortalize some of the crafts by replacing plasticine salt dough... You can decorate such crafts ready-made or add to the dough. food colorings in advance. The recipe is pretty simple:

• Mix flour and fine salt in a 2: 1 ratio
• Dilute with water and knead until the consistency of plasticine
• You can add some vegetable oil for plasticity.

Use a brush dampened with water to join dough pieces.

Important: For a longer life of the product, preheat it in the oven at a temperature of up to 100 °. It is important not to bake the piece, but to dry it out.

So, the dough or plasticine is ready, but you still need a board (on which you will sculpt) and a knife (when working with the dough).

• Sculpt individual parts of the tank: 6 wheels (make a sausage and cut it), hull, turret and muzzle
• Connect the parts: attach 3 wheels to the body on the sides, the tower on top, and the muzzle to it
• Roll up a thin long sausage and wrap it around the wheels to form caterpillars

Plasticine or salt dough tank for toddlers

You can make the tank bigger by preparing the necessary parts. You can make it easier for yourself. For example, to make the tower a regular rectangular shape, take a matchbox as a base, wrapping it with plasticine. A tube or rod from the handle in the middle will give stability to the muzzle.

Plasticine or salt dough tank

Aircraft modeling is no less exciting activity:

• Sculpt details of the hull, fenders, cockpit
• Connect the parts. For realism, you can pre-mix the details of the body and wings with a yellow plasticine sausage - this is how you get camouflage
• Blind the propeller and the stars

Another version of an airplane made of dough (you can also use plasticine)

• Blind the airplane body, at the base, bend the part slightly up
• Make the details of the wheels and fenders
• Connect the parts
• When working with the dough, secure the parts additionally using toothpicks
• Make some propeller parts, connect and attach with a toothpick

Craft eternal flame by May 9

The most simple and quick way make a mockup of an eternal flame:

• Cut a star out of cardboard using the template below (star by May 9)
• Make a hole in the center
• From orange and red corrugated paper, cut random pieces of different sizes and assemble them into a bun
• Pass the paper through the hole in the star so that the base of the bundle is on the inside, straighten the paper. Sharpen the edges with scissors if necessary, like a flame
• Stick the star on the base

You can make a composition from a toilet paper roll.

• Wrap a cardboard roll with foil
• Cut fire and number 9 from red corrugated paper to fit the roll
• Insert the fire on top, stick the number in front
• You can decorate with paper cut or fabric cut St. George ribbon

Crafts pigeons by May 9

Making the birds of the world is not that difficult, just be patient and basic necessary materials: paper, glue, scissors.

• In order to make a volumetric dove out of paper, cut out the blank according to the template:

• Cut the feathers along the lines
• By dotted lines make folds
• Glue the triangle near the tail to the body, planting the bird
• Glue the head and torso together
• Make the feathers curled, gently run along them with scissors, pulling the paper. Be careful not to tear the workpiece
• Glue the wings to your torso

A roll of toilet paper can be an excellent support for a pigeon. For this craft, in addition to the roll, you will need feathers, White paper, glue and scissors

• Wrap the roll with paper, wrap the ends inward and glue
• Cut out the body of a bird from thick white paper
• Fold a sheet of paper like an accordion, make an incision in the middle and glue it to the body - the tail
• Glue the feathers on the sides
• Make 2 cuts in the roll opposite each other and insert the torso
• Draw the eyes with a marker

If you wish, you can decorate the craft by gluing the St.George ribbon, and glue a twig to the dove's beak. It is very simple to make it.

Cut a twig and leaves out of colored paper. It is better to use corrugated paper, it is denser and will hold its shape better.

Dove of Peace - origami video

Crafts for May 9 paper flowers

It is easier to make artificial flowers from corrugated paper. It is easy to use, besides, some mistakes or imperfections typical of beginners are not so noticeable.

So, you will need: corrugated paper in red and green colors, glue, a ruler, scissors, tape and wire for the stem.

• For one carnation, cut a 45X8cm strip of paper
• Fold the edge 3 cm inward, stretch the paper a little - this will make the flower wavy
• Wind the resulting ribbon around the edge of the wire, straighten loose paper, form a flower
• Secure in the middle or at the base by tying with fine wire or thread
• Cut the bottom edge obliquely on both sides, forming a corner at the bottom
• Wrap the bottom edge with glue-smeared green paper and continue winding down the wire

A carnation made in the following way will look very beautiful:

• Cut 2-3 strips of red paper 2.5 cm wide
• Cut them into even squares
• Fold each square in four and cut the outer edges in a semicircle
• Make frequent incisions on the outer semicircular side
• Prepare the center of the flower. To do this, wrap a little red corrugated paper on the edge of the wire and secure it with green, smoothly moving to the stem
• String the flower blanks, squeezing each circle a little and straightening the edges
• Wrap the stalk wire with glue-smeared green paper. You can also cut leaves from it.

I suggest you get acquainted with another way to make a carnation:

• Prepare 6 wide strips of paper and fold them together
• Bend the sheets with an accordion and tie them with wire in the middle (it is better to take chenille green, then you can glue the usual one with green corrugated paper)
• Use scissors to scissor paper
• Fluff up the flower by lifting the edges of the paper up

Carnation for Victory Day

Crafts for May 9 star

Surprisingly, making a three-dimensional five-pointed star out of paper is not so difficult.

Paper star pattern

• Cut 2 pieces from the template
• Make folds along the dotted lines
• Fold back wings for gluing
• Lubricate the wings with glue and connect the parts

What else can you make a craft - a tank, an airplane?

The tank can be made from a wide variety of materials, such as paper or plasticine. Making a tank from matchboxes perfectly develops creative thinking and fine motor skills... You will need:

• A piece of wallpaper (colored cardboard, notebook cover - any thick paper of a suitable color)
• Matchboxes
• A sheet from the magazine (you can also use the rest of the cover)
• Colored paper
• Corrugated cardboard or corrugated paper
• Bottle cap

We start building a tank with a layout:

1. Cover two matchboxes with wallpaper or green thick paper
2. Paste one box separately - this will be the tower of the tank
3. Glue the two pieces together. You should have a model of the tank.
4. On the sides, stick 2 strips of corrugated cardboard or paper - these will be caterpillars
5. Cut out the circles of the wheel from colored paper and glue
6. Twist a tube from a journal sheet (or you can cut a juice tube) and attach to the tower. It will hold better if you make a hole in the tower box
7. Attach the bottle cap on top

In the absence of colored paper, you can make a tank by simply gluing the boxes, and then decorate it.

• You don't even need to buy materials for crafts. For example, you can make such a nice tank out of sponges.
• To do this, you will need 2 dishwashing sponges, a juice straw and glue.
• Tear off a hard surface from one sponge. Cut out the turret of the tank and the end of the muzzle from the sponge, and use a hard surface for the wheels

You can please dad or grandfather by congratulating them on Victory Day with sweets. And you can put them in the shape of a tank.

An equally important symbol of Victory Day is the plane, which is easy to make with a child, spending very little time and materials.

For example, to make very small models, you will need wooden clothespins for linen, ice cream sticks, glue and paint.

• Very interesting planes are obtained on the basis of shampoo bottles, plastic bottle caps, electrical tape and cardboard
• First, wrap the bottle with electrical tape of different colors, then glue the caps to the bottom of the bottle and cut out the missing parts from the cardboard (wings and tail)
• The details will hold well if you do not glue them, but make suitable slots in the bottle.

From plastic bottle you can build an airplane. Option for kindergarten: Cut out the wings, tail and propeller from cardboard.

If you stick on the wings, then make 2 separate parts, but if you make a slot in the bottle, then it will be more convenient to prepare a one-piece model.

Or paste over the resulting model using the papier-mâché technique and, after drying, decorate it.

This option will take more time, but you will also get an airplane that looks very realistic.

Video: Crafts for May 9

May 9? There are many ideas for crafts. Their main difference lies only in whether the work will be voluminous or flat. If in the case of a flat craft, everything is more or less clear (you can make an application), then how to make a model of an eternal flame with your own hands so that it is voluminous? In fact, everything turns out to be simple.

How to make a model of an eternal flame with your own hands?

The model of the eternal flame must necessarily consist of a star and a flame. Large crafts also contain a pedestal, which can be decorated with appropriate symbols (for example, the years of the Great Patriotic War and St. George's ribbon) and flowers (for example, red carnations that are relevant for this occasion).

We bring to your attention a master class on how to make paper out of paper with your own hands. Step by step we will write out the instructions and post photos.

Tools and materials

To make an eternal fire from paper you will need:

1. star pattern;
2. cardboard (large sheets);
3. red napkins or tissue paper;
4. scissors or clerical knife;
5. red or bronze paint (it is better to take gouache);
6. brush;
7. glue;
8. ruler;
9. pencil;
10. Scotch;
11. wallpaper with a pattern in marble.

When you have stocked up with materials, you can start a master class on how to make an eternal flame with your own hands, gradually making every detail of the craft, and then combining everything into one whole.

Stage 1 - star layout

Master class on how to make a model of a star for eternal flame with your own hands:

1. Take big leaf cardboard, scissors, glue or tape, pencil, ruler, paint and brush.
2. Place a dot in the center of the cardboard.
3. Draw two perpendicular lines through the dotted line.
4. Draw two more lines with a dotted line, which, when crossed, form the letter "X". They should be half the length of the first two.
5. Connect all the vertices. You will have a star.
6. Place a dot in the center of each side of the star, a few centimeters apart.
7. Connect the vertices and the set points with a solid line.

As a result, you should have a shape like the one in the picture above. Cut it out along solid lines.

Stage 2 - star

Master class on how to make a star for eternal flame with your own hands:

1. Take a star mockup and cut it out.
2. Bend the star layout inward along the long axes.
3. Spread out the layout.
4. Bend the star layout outward along the short axes.
5. Spread out the layout.
6. Give your layout a shape volumetric star thanks to the resulting fold lines.
7. Connect the protruding parts together, which should serve as a support for the star. This can be done either with glue if the tabs overlap, or with tape.
8. Flip the star and paint it red or

Stage 3 - fire

1. Take three napkins or
2. Draw a mock-up of fire on one piece of paper. Its shape can be different, for example, as in the picture.
3. Stack the paper.
4. Cut out the layout of the fire along the contour.
5. Fold the resulting sheets together in layers. Each next layer should be slightly lower than the previous one.
6. Cut off the leftovers at the bottom.
7. Twist the bottom of the paper and secure it with thread or tape.

The flame for the star is ready!

Stage 4 - pedestal

Despite the fact that instructions have already been given on how to make an eternal flame with your own hands, the master class will be incomplete if you do not mention how to make a pedestal. After all, it is also part of the layout. In our case, the pedestal consists of two parts: the first will stand, the other will lie. It is on the latter that the star with the flame will be located.

Instructions on how to make an eternal flame with your own hands - the first part of the pedestal:

1. Take a piece of cardboard, pencil, ruler, and scissors.
2. Lay the sheet upright in front of you.
3. Draw a strip from the edge, small in width, but long, for the entire height of the sheet. You will have the first strip.
4. Mark the distance from the line, which will be equal to the width of the finished star (or will be slightly larger).
5. By plotting this width, you get the second strip.
6. Make another strip, which will be the same width as the first. Stripe number 3 will come out.
7. Draw a fourth strip that is the same width as the second.
8. Make stripe # 5 equal to strips # 1 and 3.
9. Fold all 5 strips.
10. Make a box along the folds, only without the top and bottom.
11. Glue strips 1 and 5 together.
12. Make small cuts on one side at the folds of the thin sides of the box.
13. Close the box.

The first part of the pedestal is ready. It can be either painted or pasted over with marbled wallpaper.

The second part of the pedestal is done similarly to the first, only there are a number of features:

• The width of the second part should be equal to the width of the first.
• The height should be slightly higher than the first one. This is done quite simply: increase the size of the side walls.
• The second box must be closed on both sides.

After you assemble the second part of the pedestal, decorate it with paint or wallpaper.

Stage 5 - collecting all the details

When all the components - the flame, the star and two parts of the pedestal - are completely dry, you can start assembling them.

Operating procedure:

1. Place the second piece of plinth on a table or other surface.
2. Place the first piece on the second, close to the edge. You can fix it with tape.
3. Make a small hole in the center of the star. This is most conveniently done with a thick needle or awl.
4. Insert the flame into the resulting hole. This must be done carefully so as not to tear the parts. To do this, you can help yourself with a needle or a toothpick.
5. Place a star in the center of the lower part of the pedestal, having previously greased its support with glue.
6. Spread out the flame.

The eternal flame is almost ready.

Completing the "Eternal Flame" craft

The above master class on how to make an eternal fire out of paper with your own hands in stages, also implies decorating the craft with flowers and inscriptions.

Instructions on how to make paper carnations:

1. Take the red corrugated or tissue paper red and green, wire.
2. Wrap the wire tightly with green paper, securing the ends with glue. The stalk is ready.
3. Fold several sheets of red paper into a stack (about three to five).
4. Fold the paper into an accordion fold.
5. Wrap a stem around the middle of the accordion.
6. Trim the edges of the accordion, giving it a sharp shape.
7. Carefully smooth out each accordion layer.
8. Fluff up the flower.

One clove is ready. Do a few more as shown.

Now you can decorate the pedestal with an inscription.

Operating procedure:

1. Take cardboard, ruler, pencil, scissors and red paint with a brush.
2. Draw two parallel straight lines on the cardboard, keeping in mind that the distance between them is equal to the size of the future letters and numbers.
3. Draw the following and numbers between the resulting lines, which should be the same in width: 1, 9, 4, 1, 1, 9, 4, 5, P, O, M, H, I, M, G, O, R, D , I, M, S, Ya.
4. Cut out all numbers and letters.
5. Paint the parts with red paint.
6. Let the parts dry well.
7. Print out an image of the order with the St. George ribbon, or find such an image on postcards.
8. Cut the image along the outline.
9. Glue numbers and letters in correct order on a pedestal (for example, as in the photo), and also place a picture of the order and St. George's ribbon.

Place the carnations next to the star. Paper craft The Eternal Flame is ready! To prevent the craft from spoiling:

• Place it on a flat board.
• It is better to wipe the dust from the craft not with a cloth, but with a special brush. Then the parts will not be damaged.
• Choose a place where there will be an eternal flame, without straight lines. Otherwise, the paper will burn out and lose its brightness.

We hope that you understand everything in step-by-step description how to make an eternal flame with your own hands. The master class is over!

Add your own ideas to your craft, such as print out pictures of soldiers, stick them onto cardboard and cut them out, leaving a support. Place the resulting figures next to the eternal flame.

Useful Tips

For Victory Day, I would like to make our veterans, grandmothers and grandfathers a do-it-yourself gift.

There are many crafts for such a day, but perhaps the most popular is the eternal flame.

This symbol can be made from paper and cardboard.

Here are some options for how you can make an eternal flame with your own hands:

Do-it-yourself eternal flame. Option 1.

Having made such beautiful craft, you can use it to decorate any room for Victory Day.

You will need:

2 sheets of colored cardboard

Ruler and pencil

Red napkin

1. Draw a large star on colored cardboard and draw auxiliary lines (see image).

2. Cut out the star and fold it where the fold lines are shown.

3. Make a small hole in the center of the star.

4. Glue the star to a piece of colored cardboard.

5. Insert a neatly folded red napkin into the hole of the star, which will act as a fire.

How to make a 3D star:

How to make a star (kirigami)

Do-it-yourself eternal flame made of paper: eternal flame made of paper. Option 2.

You will need:

Cardboard box

Colored paper or colored cardboard (red, orange, gray, yellow)

PVA glue or double-sided tape

Blue wire

Paper cups for muffins (cupcakes)

Red

Brush

Full-length photograph of a soldier.

1. Prepare the base. Take a small cardboard box and glue it onto the cardboard (preferably gray) to create a pedestal.

2. The pedestal can be pasted over with red paper or just initially use a red box.

3. Glue a piece of cardboard underneath so that the edges form a stand for the soldier. You can make two coasters.

4. Making a star.

Take a gray sheet of paper and draw or print some stars different sizes... Cut and glue these stars to the base and on top of each other, starting with the larger star and ending with the smaller one.

5. To make a fire draw a flame and cut it out. If you like, you can make the fire more believable by using three layers of paper or cardboard: red, orange, and yellow.

Just glue the layers together.

6. Now the fire can be glued to the stand, which can be made by only slightly bending the lower part with your hands.

7. Cut out the images of the soldiers at the post and use double-sided tape to glue them to a strip of cardboard, which is slightly longer than the picture itself. This strip then needs to be bent like a triangle and glued to the base (see image).

8. Now you can make carnations. Take paper baskets for muffins, make small holes in them and insert blue wire or cardboard strips into them. Paint the flowers with red paint.

To find out how else you can make paper flowers, check out our articles:

9. Make a flag and a helmet and glue them on.

10. Use flowers to decorate the pedestal. You can fix them with double-sided tape.

Craft "Eternal Flame" with your own hands from modules. Option 3.

How to make a module:

Start folding paper modules round:

Add rows until you get a big star.