Best gift for women, k is flowers. And I want these flowers not to fade for a long time, pleased with their juicy appearance. Living plants, of course, die very quickly, but products are a completely different matter. From satin ribbons, you can simulate copies of any color using satin ribbons or other fabric. This tutorial shows step by step diagram creating a panel by March 8 on a disk decorated a bouquet of kanzashi roses. Roses were not chosen by chance, because all women prefer this particular variety of flowers.

The basis of the panel is an ordinary computer disk. At the first stage, you will need such accessories:

• - disk;
• - thin white satin ribbon 0.5 cm - length about 7.5 m;
• - a tire of gold (silver) color - the length must correspond to the circumference of the disk;
• - a gold lace for a loop (if there is a need to make a pendant) - about 15 cm;
• - hearts or half-beads with a diameter of 1 cm of red color for decoration - 6 pieces.

For a bouquet of three roses, you need:

• - cuts of satin ribbon 2.5 cm in pale, hot pink and red shades, 6 cm long - 17 pieces per rose;
• - cuts of green brocade 2 cm long 10 cm - 3 pieces;
• - cuts of satin ribbon 2.5 cm green 10 cm long - 6 pieces;
• - cuts of a thin green ribbon 0.5 cm long 5 cm - 3 pieces for loops;
• - complex stamens - 3 pieces;
• - green felt circle with a diameter of 4 cm - 1 piece.

Step-by-step instructions for creating a panel with kanzashi roses

1. Having prepared the disk, a thin white tape and everything you need to create the base, begin work. Wind the tape around the disk so as not to leave gaps, the rings should be even, overlapping and symmetrical. Gradually apply drops of glue to get a tight design. Glue the end too.

2. Cut off the required amount of tire and stick it on the outer edge of the rim.

3. Prepare cuts for bud petals. A combination of pink or any other shades will do. Slices of atlases are best immediately singe with a lighter.

4. The petal modeling scheme is clearly shown in the photo. Two adjoining corners go down like a house. Then the formed sharp corners are bent, combined with the previous lowered corners. A lighter will also help to fasten the workpiece in the required position.

5. Make 17 petals for each rose: soft pink, pink and red.

6. Twist the first petal into a tube, then stick the second, third and start modeling the bud. In this case, the inner side of the petal will be solid, and the outer side will be cut.

7. Stick the petals gradually around the circumference.

Like the product and want to order the same from the author? Write to us.

More interesting:

See also:

Wreath on the head "Apple blossom" (kanzashi)
Wreath with flowers in the technique of kanzashi "Apple blossom" A wreath with small leaves and flowers himself...

"Sweet Bouquet"
Sweet candy bouquet Your master class on making a sweet candy bouquet is presented by ...

Roses from maple leaves
I hope no one lost me? We had no internet for two days, but one day it was "Indian years ...

paper ball kusudama
Kusudama - a variety modular origami, balls assembled from paper flowers or geometric fi...

Based on the kanzashi technique from satin ribbons, you can make not only spectacular decorations with your own hands, but also delightful paintings and panels. Basically, these canvases consist of a variety of colors. The most popular are, of course, roses. Looking at such works, one gets the impression that we seem to be painting with ribbons.

We draw with ribbons - this can be said about the creation of such paintings. This master class will serve as a guide for beginners. Based on it, you can easily understand how such work is done with your own hands.

Because this picture will consist of flowers, namely roses, it is necessary, first of all, to prepare petals for them in three different sizes. For this, a satin ribbon of a suitable shade is taken and five by five centimeters squares are cut out of it. You can vary the size of the petals at your own discretion. For example, for one rose, you can make four narrow petals, five medium-sized and ten wide. The height of each such part must be the same.

By themselves, the petals are cut out obliquely. The edges of all elements must be melted using a candle or a lighter for this purpose. For beginners, this will not be easy to do the first time, so you should first practice and fill your hand. In the course of work, you will gradually understand how this process takes place and how the petals are given the necessary shape, as in the photo.

To make leaves for flowers, you can use organza, as well as silk ribbons in four different shades. Use different shades of green satin ribbon in your work. So your picture will have a more vibrant look. Such tonal diversity will bring interesting overflows to the picture. You can use three colors of tape in your work. This master class uses four tones - two from silk and two more from organza.

In order to fasten the branches of leaves, use glue. Hot glue is more suitable for gluing roses.

We continue the master class and draw with ribbons further. Roses are made according to the following scheme: first, we form a core, which consists of narrow petals, after which, we fix the next medium ones and then the remaining wide ones. You can make the rose however you want by placing the petals in any order. See how such stunning flowers look in nature or in a photo and make an original rose with your own hands.

At the final stage, it is necessary to fix the flowers and leaves on the prepared canvas. Use hot glue from a special gun for these purposes.

As a result, you get a wonderful picture of satin ribbons, as in the photo. This product is perfect for the interior of your home or will become original gift for loved ones.

Panel with roses

Another master class will show you the steps for creating a wonderful do-it-yourself panel with lush roses, which is suitable for a classic interior.

To create such a cute panel, prepare:

• hoop frame;
• The material on which the roses will be placed;
• Satin or silk ribbons;
• Needle;
• Threads;
• Glue;
• Cardboard;
• Scissors;
• Decorative ribbon (can be replaced with a golden cord), to create a border for a vase;
• Pins.

A master class for beginners begins with the creation of roses from satin ribbons. In total, for the panel you will need seven of these elements.

Next, you need to fix the material that is taken as the basis for the frame. The frame itself can be put on a pillow and using pins, one after another, attach roses with leaves to the material.

You can sew on all the created flowers and leaves in any order, as it will be convenient for you. This way you will receive your own original product. First, the leaves are fixed on the canvas, and then proceed to attaching rose flowers. The vase is made last. For her, take a square template made on the basis of cardboard and wrap it with the selected material. You can also decorate a vase with beautiful ribbon or gold cord. At the final stage, glue the vase under the roses. Thus, you will get a wonderful panel that is suitable for the interior of a living room or a children's room.

Having considered all the stages of creating a picture from ribbons with your own hands, we will consider how its main elements are created.

We draw flowers with ribbons. To create a rose from a satin ribbon, take a ribbon of fifty millimeters and make eight pieces of it 10.5 centimeters long and nine pieces of 11.5 centimeters. Vary this amount at your own discretion. It all depends on how lush flower you want to receive. The borders of the tapes must be melted with a lighter or matches. Having made the required number of segments, we proceed to folding the bud.

Making a bud begins with the fact that you will need to bend the right edge of the tape and fix it with a pin. How to do it right can be seen in the photo. Next, you need to bend the edge data one more time and fix it with a thread in several additions.

The next step, you will need to bend the upper border of the ribbon and fold the bud. Fix the received part with a thread. As a result, we will train a bud for a rose, as in the photo.
Next, draw petals with ribbons. For this, we take upper part and bend it 0.7 centimeters and stab it with a pin. The next corner of the satin ribbon is tucked up and also stabbed with a pin. We do the same with the second corner. Then we take the thread in several additions and we outline the bottom edge with it. After that, the basting is pulled together.

Before sewing on the second petal, you need to pin it on a pin to the bud. This will help prevent it from shifting. The borders of the petal wrap around the bud and are fixed with threads along the bottom.

After the second petal, we create the next one - the third one in a row and fix it on a pin to the bud, after which it needs to be sewn.

All other petals are made on the basis of a similar scheme of actions. To make your rose look natural, use several shades of ribbon in your work. For example, make the petals inside the rose from a darker material. Ready-made buds can be further decorated by using beads for this. It remains only to sew leaves from a green ribbon and a rose will be made.

Now, let's look at how the leaves for the panel are created. Prepare ribbons, threads, a needle, a lighter, scissors, a ruler, and a simple pencil for work. If possible, you can also use a needle threader.

Leaves are also best made from satin ribbons of different colors and with different widths. They can be not only satin, but also nylon or organza. Choose any material of your choice. Try each of the above materials in your work and choose the option that is more convenient for you.

Rose leaves will make pointed shapes with ruffles. To do this, you need to take a ribbon, the width of which is five centimeters. Next, you need to take a ruler, measure eleven centimeters and cut them off. To avoid shedding of tape edges, they must be singeed. A lighter or a candle will help you do this. We just melt the edges over the tribe.

The resulting segment is folded in half, so that you can determine its center. Next, we bend the edges from the center to the bottom. A line is laid on the underside. Please note that when laying a stitch, you must grab all the tape layers with a needle.

Having laid a line, it must be pulled off. Tighten the thread tight enough, wrap the base of the sheet with it and fix it.

Having thus made all the necessary blanks, proceed to fixing the colors on the panel. For a classic interior, such a picture is perfect.

We have considered several options on the basis of which wonderful paintings are made using the kanzashi technique and panels with our own hands. For these products, everyone's favorite rose flowers were used using the kanzashi technique. In addition, there are many more colors from satin ribbons that can be used to decorate such works. Working with such pictures, we seem to draw with ribbons. Choose the appropriate master class for beginners, which is on our website, look for new ideas and create wonderful paintings in an interesting style for any interior.

Video: Making chic roses from ribbons for a picture

The kanzashi technique is available even for beginners, it allows you to short term and with great pleasure create voluminous bouquets of roses on the panel from ribbons, make beautiful New Year cards or autumn panel from tapes everything that is enough for desire and inspiration.

Kanzashi paintings. All women want to make their home cozy. Various paintings or panels help in creating a comfortable state for the home. In our article, we will provide you with a master class on making a kanzashi painting. Read how you can make such paintings with your own hands.

Kanzashi Style (Tsumami)

Thanks to our master class, you can create such a picture quite quickly, especially if you already have skills in this technique and new ideas. Surely you have already noticed such pictures in the photographs. You can use the panel created by your own kanzashi-style handles both to decorate your home and as a present to your relatives and friends. It will fit into almost any interior and will delight all the people living in your apartment. So, now we move on to our master class. Materials that will be required for work.

Kanzashi painting master class

The first step of the master class on creating crafts: a frame, flowers.

Gallery: kanzashi paintings (25 photos)

The second step of the master class: leaves

In order to create leaves for your flowers, we will cut out a leaf from a five-centimeter-wide green ribbon, previously depicting it on the material with a pencil or chalk. And then we just scorch it with the fire of a candle along the edges in order to accurately fix the outlines of the sheet. In the meantime, our sheet is cooling, bend its edge with your hand. You can create leaves in a different way. To do this, we take our green material and cut out a trapezoid from it with sides of 4 and 1 centimeter. Then we bend it in half, pressing two corners to each other. At the same time, the front side of the fabric should remain inside. Let's melt the corners, then sharply pressing the scorched edge with our fingers.

Then slowly turn the created leaflet. The leaf will come out in the form of a round arrow. Photos of leaves can also be found quickly, so you can see how they generally look.

The third step of the master class: making a kanzashi painting

When you definitely have flowers and leaves ready, all that remains is to lay everything out on the material in such a way that you get a gorgeous picture. Do this based on your thoughts about bouquets and flower arrangements. This is how you wish to arrange the flowers, so lay them out, give in to your imagination in this work.

• Then posting a picture, we will draw with a simple pencil or small stems to our flowers.
• And then, let's sew their green threads. Moreover, it is worth taking several threads so that the stalk is very noticeable.
• Now let's move on to gluing leaves and flowers to our canvas. First, of course, we glue the leaves, and only then the flowers themselves. Remember that the glue should be applied only to the middle of the leaves so that it does not spread and does not give the picture a bad appearance.
• Well, when you do all this, then you just have to make the final touch in your work. And it consists in gluing the base along the perimeter onto the back particle of the frame and placing the finished picture in this frame. So our unusual picture is ready.
• It can be hung to the most prominent place in the apartment. Let it please you, your loved ones, as well as the guests of your room.
• I hope the master class you liked it, and you can easily make a kanzashi picture with your own hands, to the delight of yourself and your loved ones. best idea to decorate the interior in the house, there will be a creation of a picture using the kanzashi technique from satin ribbon and fabric, because it will take very little material and effort. A handmade craft will always differ in some way from purchased items.

1. ELEMENTS OF KANSASHI FOR DECORATION OF PICTURES AND PHOTO FRAMES

One of the interesting trends in needlework, which has gained popularity in Lately- embroidery of pictures. Embroidering pictures with a cross or beads, many masters and craftswomen create real works of applied art! Pictures can be interesting to decorate. And here the popular comes to the aid of needlewomen decoration technique - kanzashi.

Usually, kanzashi-style decor elements are made from satin ribbons or bright multi-colored fabric. The most common crafts are flowers , butterflies, bows. In previous articles, we have already told you how to use the kanzashi technique to decorate popular women's hair accessories - brooch, automatic hairpin, bezel, crabs.

In this article, you will learn how to make your own elegant flowers in kanzashi style with round or sharp petals and decorate them with embroidery or photo frames. Via simple videos and photo master classes for beginners, you will quickly learn how to make graceful flowers that will decorate a picture with a frame using the kanzashi technique.

In general, in Japanese kanzashi there are many interesting ways production of decorative flowers from different materials . Japanese masters use the most different types colors for decorating jewelry: fan-shaped ogis, kushi combs, birabira pendants, kanokodome stone flowers, kogai hairpins, tama and kusudama. But our most common technique is hana (or tsumami). This is a direction in needlework. Only as a material for creating separate modules for crafts, not paper is used, but a satin ribbon. Square pieces are cut out of it and elements for jewelry are formed.

The most common elements are petals different shapes, with curls and without. Flowers are formed from them, and from flowers - compositions for decorating women's accessories. or paintings. The most popular flowers from ribbons in kanzashi among masters are irises, roses, chrysanthemums, lilies. Sometimes the central part of the flower is decorated with beads, rhinestones, buttons.

The easiest way to decorate a picture with kanzashi flowers:

Materials and tools for work: sharp scissors, hot glue gun, lighter, wide wooden frame, A-4 cardboard, large black beads, felt, burlap, gold braid, steel tape. Satin ribbon of yellow, green, orange, red colors (width - 5 cm)


Stages of work:

from satin ribbons cut out pieces of 5 by 5 cm.

We form round petals from orange, yellow and red squares using the kanzashi technique (below are separate MKs for making different petals and flowers)

We make round and sharp petals from green squares. Green petals will be single and double.

Now we make the core for the flower. To do this, carefully cut out a circle of 1.5 cm from felt with scissors. Then we cut out 4 more of the same circles.

The made petals are distributed around the circle of our core and glued with hot glue.

In the center of the core of the flower, beads must be glued, and along the edge - a golden braid.

We cut out sharp petals from a steel ribbon and distribute them between the petals from satin ribbons.

We make the basis for the kanzashi flower arrangement in the form of a picture. We stretch burlap on a sheet of cardboard and fix it with a wooden frame.

Now it remains to trust your taste and create a composition of kanzashi flowers on the canvas. Flowers can be glued with super glue.

3. MASTER CLASSES. DIFFERENT COLOR VARIANTS OF KANSASHI FROM RIBBONS FOR PICTURE DECORATION

Master class 1

ELEMENTS FOR BEGINNER NEEDLEWORKS. WITH THE HELP OF THIS INSTRUCTION WITH SCHEMES AND MK YOU WILL EASILY LEARN TO MAKE SEPARATE ELEMENTS FROM SATIN RIBBONS IN THE KANSASHI TECHNIQUE.

Master class 2

HOW TO MAKE AN ORIGINAL FLOWER WITH DOUBLE PETALS IN THE KANSASHI TECHNIQUE WITH YOUR HANDS. STEP LESSON WITH PHOTO.

Master class 3

How to make different petals and leaves to decorate kanzashi flowers and paintings:



4. VIDEO MK FOR BEGINNERS. DECORATION OF PICTURES IN KANSASHI TECHNIQUE

We can recreate a wide variety of flowers from satin fabric.

Today I want to present you a violet kanzashi panel. It took me a lot of time to make this panel, but I like to make panels - small original paintings of satin flowers.

1. satin fabric or satin ribbon 5x5 cm lilac;
2. satin ribbon 2.5 cm greenish-olive;
3. satin ribbon 2.5 cm blue;
4. satin ribbon 0.6 cm olive;
5. a rectangular piece of cardboard 20x30 cm for the base;
6. pink fabric for the base, slightly larger than cardboard;
7. jute;
8. ready-made centers for kanzashi or mother-of-pearl beads and large white beads;
9. glue "Dragon" or hot glue;
10. candle and lighter;
11. ruler.

The process of doing work

Step 1: make the base

We take cardboard and pink fabric for the base. We attach the fabric to the base. From the wrong side, we apply Dragon glue to the cardboard and glue the fabric to the base.

Step 2: Making Lilac Petals

To make petals, we need pieces of satin fabric 5x5 cm in lilac color.

We take one piece. Fold the fabric diagonally in half, and then four times.

We take the fabric folded four times with our fingers at the angle opposite from the double corners, retreating approximately 0.7 cm. We turn the fabric from front to back by 0.7 cm. Then we turn the fabric forward by 0.7 cm, and again back, also by 0 .7 cm

On one side of the craft, we have formed half of the petal. On the other side of the petal, we also retreat 0.7 cm back and forth until we get a pretty petal.

We fix the petal with tweezers. Cut off the excess fabric at the front of the petal. We melt this part over the candle. Then we cut off the protruding fabric from below, and melt the cut edge above the candle.

Working in this technique, we make the required number of petals. I decided to make 6 lilac violets, so I made 24 petals.

We glue the petals by 4 into neat flowers.

Step 3: make the center

You can take ready-made centers for kanzashi, but I made the centers myself from mother-of-pearl beads, large white beads and monofilament.

Glue the purple flowers to the base. Inside the flowers we glue the centers we made for kanzashi.

Step 4: make green leaves

For the manufacture of leaflets, we take a green ribbon of 2.5 cm. Cut the ribbon into pieces of 2.5x2.5 cm.

Take one of the pieces and fold it in half diagonally. Then fold it diagonally in four.

With your fingers, we take the folded fabric by the lower opposite corners. We put these corners together, forming a pretty petal out of them.

We take the petal with tweezers. We cut off the excess fabric in front and melt this part over the candle. We grab the melted area with our fingers or tweezers so that it sticks together well. Then we cut off the excess fabric from below and melt this area over the candle.

Working in this technique, we make a sufficient number of petals.

We glue the petals together into branches of 3 and 5 petals. Glue the branches to the base.

Step 5: Making Rose Petals

For the manufacture of petals we take satin ribbon 2.5 cm blue. Cut the tape into pieces 2.5x2.5 cm.

Take one of the pieces and fold it in half diagonally. Bend down the side corners to the central lower corner.

Fix the fabric with tweezers. We cut the fabric from below and melt this part over the candle. The petal is ready.

Working in this technique, we make a sufficient number of petals.

Step 6: Making Roses

To make a rose, take one of the petals and twist it with a tube. We fix the tube with glue. We take another petal and glue it around the tube.

Then we overlap other petals around the workpiece, forming a rosette from the petals.

In total, for the panel, I decided to make 3 roses.

We glue roses on the panel.

Step 7: Making the Rose Petals

To make petals for roses, we take a 0.6 cm olive-colored ribbon. We cut the tape into pieces of 5 cm.

Glue the ends of the tape as shown in the photo.

Glue the petals around the roses under their bottom.

Let's add some more green petal-twigs for symmetry.

The flower decoration for the panel is ready, it remains to make a frame.

Step 8: Weave the Frame

I decided to weave the frame for the panel from jute twine. Weaving is made of double flat knots for macrame.

For weaving, we cut the twine into 6 threads 2 meters long. We fasten the threads to a flat surface.

We take 4 threads on the left. We tuck the leftmost thread and put the fourth thread into it. We tighten the threads. Then we tuck the fourth thread and put the leftmost thread into it. We tie a knot.

Then we take four threads on the right. We tuck the extreme right thread and put the fourth thread on the right into it. Then we tuck the fourth thread and put the rightmost thread into it. We tie a knot. In a word, we remember that first you need to tuck the extreme left or right threads, and only then the fourth threads.

Working in this mode, we weave a ribbon around the perimeter of the panel. In my case, this length is 1 meter.

Glue the jute tape around the perimeter of the panel.

The panel in the technique of kanzashi "Violets" is ready.