What is quilling, what is necessary for this skill and the technique of handicrafts. Easy quilling schemes, 29 photos and videos for creating shapes.

Quilling originated in the 14th century, now it is experiencing another birth. Many are attracted by the fact that such beauty can be created with your own hands from paper strips.

Quilling for beginners - what you need to prepare

For those who have never been involved in such creativity, it is better to start with simple crafts. It can be:

• postcards;
• snowflakes;
• flowers;
• panel;
• images.

They will tell you how to make a craft using the quilling technique for beginners. Below are the basic shapes that are used to create true pieces of fine art. First, you need to prepare everything you need for this type of creativity.

If you have the opportunity to buy a quilling kit, buy it. The basic kit includes:

• strips of colored paper;
• a template with a coordinate grid, radii, guides applied to it;
• a device with a bifurcated metal tip, with which paper tapes are twisted;
• glue;
• small scissors;
• tweezers.

More complete sets for quilling are also available. There is a ruler with round holes to make curling elements along it. the right size; pins for rough fastening of parts. Ready-made kits are also sold, in which there is a diagram, blanks for making flowers, a butterfly, a picture, and so on.

If you do not have the opportunity to buy a ready-made set, this should not stop those who want to create. Tape twisting quilling tools can be transformed into:

• nail scissors with straight ends;
• awl;
• kernel;
• gypsy igloo;
• a toothpick.

Cut off its sharp part from the toothpick, and bifurcate the resulting tip with a clerical knife. In this hole, you will insert the edge of the paper tape and twist it.

When using nail scissors, paper strips are placed between two blades. Next, the tape is wrapped around this tool and a spiral of the desired size is obtained.

When using an awl and a gypsy needle, the edge of the strip is superimposed on the metal part, adhered with two fingers free hand and twists. They also work with a rod, but in this case, the core of the workpiece may turn out to be larger than necessary, then any of the four tools listed above are used.

Quilling paper strips can also be replaced. To do this, cut them out of white or colored double-sided paper.

Quilling schemes

A detailed description of the manufacture of various elements of this needlework will help you create real masterpieces over time.

The main elements of quilling are:

• tight and loose spiral;
• curl;
• drop and curved drop;
• semicircle;
• eye;
• arrow;
• sheet;
• heart;
• triangle;
• crescent;
• square;
• foot;
• horns.

Almost all work begins with making a "tight spiral". Take a strip of quilling paper. If there is no such material, then lay a sheet of A4 paper horizontally in front of you, moving the scissors from bottom to top, cut a strip equal in width to 3-5 mm. Attach the tip between the blades of nail scissors, in the slot of a toothpick or a special quilling tool.

Hold the paper tape with your left hand and the tool with your right. If you have a double-sided strip, then its seamy part should look towards the rod. Rotate the tool clockwise, and with the fingers of your left hand, hold the spiral that begins to form at the top and bottom so that the curls are even and level.

When the tape runs out, drop a little glue on its free end and attach it to the spiral so that it does not unwind, and the workpiece looks neat. This is how you made one of the main quilling shapes. Many others are based on this very element. For those who are better at using the left hand, you need to carry out this process in a mirror image.

The next element is called a "free spiral", make it from the shape you just got. To do this, remove the spiral from the needle, let it unwind a little. You can do it differently - do not let go of the fingers of your left hand, but slightly rotate them in the center of this quilling element, and the spiral will weaken.

To make a "curl", you do not need to glue the free end of the curled tape to the spiral. To make a "drop" it is necessary to squeeze the "free spiral" on one side with your fingers for a few seconds. A "curved blob" is obtained if you bend the corner of the "blob".

The element called "eye" is also easy to make. To do this, the "free spiral" needs to be pulled slightly to the sides and clamped on two opposite sides, then released. The "leaf" shape will turn out if you bend the corners of the "eye", one - to the right, the second - to the left. To make a "semicircle", take a free spiral, press on it so that the upper side becomes rounded, and the lower one is even.

It clearly shows how the elements are made using the quilling photo technique. Looking at it, you will understand how to create an "arrow". To do this, press your fingers on 3 sides of the spiral to make a triangle, now press its two corners to each other, leave the third as it was.

To do greeting card using the quilling technique, you can decorate it with an element called "horns". To do this, you need to take a long paper tape, bend it in half, wind the right side in a spiral clockwise, and the left side counterclockwise.

The "heart" shape is made in the same way, only the right half of the ribbon is wound counterclockwise, and the left half - clockwise. The junction of these two elements must be pinched with your fingers to get the corner of the heart.

The "crescent" is made of the "eye", its 2 opposite corners are bent in the form of the letter "C". The "triangle" will turn out when the "free spiral" is squeezed in three places, and to make a "square" it must be done from 4 sides.

For the "foot", you need to make a "triangle" shape, and then bend two opposite sides of it with your finger to the center.

How flowers are made using the quilling technique

Now that you know how to make the basic elements for this type of creativity, you can start the fun process and create original postcards... If you want to decorate them with these colors, then from the "free spiral" make a "drop" shape. To make the petals colorful, use different colored quilling paper. The middle of the flower will be formed from a "free spiral" shape.

Put glue on a card or cardboard, attach a "free spiral" here. Also, using glue, fix a few petals around it. The stem is glued in the same way. For it, take a strip of green paper. The middle leaf, as you can see, is made of the "drop" shape, and the top and bottom ones are made of the "eyes" elements. After the glue is dry, the work is complete.

You can make other postcards using the quilling technique. For beginners, another simple option is offered.

As you can see, the middle of the flowers is a "free spiral". The petals are made from the same element but in a different shade. Decorate the card with a heart element and an eye shape. A beautiful creation will be appreciated by the one to whom you present such a gift.

How snowflakes are made using the quilling technique

For the New Year, you can make a snowflake. For her you will need:

• quilling paper;
• stencil;
• tailor's pins;
• glue gun or PVA;
• quilling tool.

Cut 3 strips of paper in half, you need 5 cuts. Insert the tip of the first into the hole of the quilling tool, twist the tape tightly. Remove it and insert it into the hole of the stencil. Let's say it is 10 mm. You will have your first workpiece with this diameter. Make the next 4 elements the same size.

To remove the spiral from the stencil, pick it up in the center with a toothpick and remove it, pressing the workpiece with your finger. Let it unwind a little, glue the tip. You now have a "free spiral". Place all 5 blanks in the center of the template, it will be easy to align them with it.

If beginners make a snowflake using the quilling technique, then it is better to attach the elements to the template with a pin, and then glue them together. Then the parts will be arranged as needed.

As you can see in the photo, 10 parts of the “eyes” are located around the five elements of the “free spiral”. Make them and glue them together and with the center pieces of the snowflake.

The next 5 parts of the "free spiral" are made of solid strips, so they will be 2 times larger than similar ones glued to the center of the snowflake. A stencil will also help to achieve their evenness. Use a hole with a diameter of 2 cm. After gluing the tip to the spiral, let it unwind and attach each such blank to the previous row of parts.

To prevent the “free spiral” in the snowflake from unwinding, direct the center of the spiral to its edge, press down. You can apply a little glue here so that the middle of the workpiece moves to the edge.

As you can see, the "tight spiral" attribute of winter and New Years is being completed. You need 5 such elements, made using a stencil. Glue them in place. If you will be hanging a snowflake, pass a strong thread through the center of one "tight spiral" and pull it out through the middle of another. Tie a bow and hang it on the tree or on the wall.

The video clearly shows how to make a quilling of a snowflake:

You have read how to make flowers, a snowflake using the quilling technique, got acquainted with the main elements that are used to create works of such creativity. A lot of new and interesting things await you ahead, you will learn how to make a lake, pictures, animals using the quilling technique. You will also learn how to make candy bowls, which are almost as strong as glass ones, but, unlike them, will not break.

Other video tutorials on quilling (for beginners):

Other pictures of quilling works:

Paper products are very popular with most needlewomen. One of the types of creating paper crafts is quilling. Postcards, pictures, crafts will get original view... In most schools, in labor lessons, quilling classes are already taking place, teachers are writing a lesson outline.

The most common quilling product is a flower. It can be created in all kinds of shapes and sizes, made flat, or vice versa, voluminous. It is even possible to create a bouquet with your own hands. But this will require patience and perseverance, since the work is quite painstaking and requires your attention. Below is a small master class on creating flowers using the quilling technique.

What materials will be needed to make all kinds of colors:

1. First of all, it is, of course, special paper. It can be thin or wide. There are sets with all possible colors, and there are also solid colors. You should choose based on the color of your future product. You can make such paper yourself: cut the formatted colored sheets into strips of no more than 1 cm. This is the optimal size.
2. A thin rod, which is required for wrapping blanks. You can use a gypsy needle, an awl, an empty rod from a pen, a toothpick, etc.
3. Tweezers, which you will need to do painstaking work. For example, such as applying glue to a corner of paper.
4. Sharp scissors, PVA glue, compasses, pencil and ruler, as well as a small brush.

It is with the help of these materials and tools that we will create future products. Quilling is a fairly small technique, so in order for your work to look neat and beautiful, you need to use
with tweezers and a small brush.

Professionals have special machines for creating blanks, cutting strips and fringes. But most do it manually.

Before you start creating some serious crafts, you can practice creating a simple postcard. This will help you master the technique, understand its principles, and know what not to do.

Some useful tips for beginners:

1. In order for your blanks (rolls) to be of the same size, you need to purchase a special blank or ruler.
2. Do not use too much glue - it can ruin the look of your product. It can be applied using a thin brush or a toothpick.
3. You should not rush to do everything faster. Accuracy and accuracy are important here.

It can take a beginner an hour to create one flower! But do not rush, make your flower beautiful and neat. You will find small lessons in this article.

Basic shapes of figures:

• Foot;
• Arrow;
• Wing;
• Spiral;
• Eye;
• Triangle;
• Leaf;
• Month;
• Square;
• Rhombus;
• Semicircle;
• Tulip;
• Oval.

It is these shapes that are used to create flowers using the quilling technique. They can be combined with each other, modified, show your imagination.

How to make flowers using quilling

Using the quilling technique, you can make a wide variety of flowers: asters, dandelions, white daisies, roses, chrysanthemums, yellow daffodils, sunflowers, spring snowdrops, irises, cornflowers, orchids, various wildflowers, forget-me-nots, lilies, blue pansies, poppies, peonies ... The orchid will also be an adornment for any flower arrangement, as well as lotus and mimosa, carnation. There are a lot of flowers. You can use ready-made schemes with a detailed description.

Making dandelions step by step:

1. First of all, the yellow strip of paper needs to be cut into a fringe. Do this with manicure straight scissors. Then the fringe will be very thin and will give the flower the desired structure.
2. Prepare a green strip: cut it with a "fence", pointed upwards. Glue it very carefully to the end of the yellow strip. Make sure that the glue does not glue the lace edge.
3. We begin to twist a tight roll. As a result, you will get a small yellow bud with green leaves.
4. Now you need to add volume to the dandelion. Fluff it well.
5. With your finger, inside the roll, push through the cone. We glue the stem together with the leaves inside.

Dandelions are ready! They will remind you of spring, delight you with a good mood. Hand-made products bring much more positive emotions than purchased ones.

Daffodil manufacturing technology:

1. It is necessary to purchase or prepare 3mm tapes.
2. Prepare a suitable background.
3. We start making the first flower. It will consist of six petals, the form of manufacture is an eye. To make the eye, we make a spiral, squeeze the opposite edges and give the necessary shape.
4. The second flower will consist of only two petals. We twist the spiral and give it the shape of an eye. The core of this flower is a triangle. It is done very simply, the spiral of the strip is compressed in three places.
5. Now you need to make the stamen. It will be a wide ribbon (about 1 cm wide), twisted into a tight spiral.
6. We make the core of the first flower - cut a fringe on a strip and twist it into a roll, fluff it up.
7. Leaflets - paper ribbons different lengths... Lengths can be taken from 8 to 15 cm.
8. We start assembling the craft.
9. Leaves are double-folded ribbons, with glued together curved edges.
10. On our background we glue the core of the first flower - a spiral with a fringe. Lay three petals symmetrically around it. Then, between the already glued petals, we report the other three. The first flower is ready.
11. The second flower is laid out like this: the core-triangle is glued in the middle, and two petals-eyes are allowed from its edges.
12. Now the leaves are glued to the craft.

So the flower craft with daffodils is ready.

Making a flower using the quilling technique

Most craftsmen use a comb (loop quilling) to make shapes of blanks. A strip is attached to the comb, and then the figures are made using a special technique.

A wide variety of flowers can be made using this technique. The stages of implementation will also depend on the shape of the parts.

With the help of a comb, you can make various fantasy types and shapes, using them in subsequent crafts.

Interesting options for creating crafts with flowers:

• Riding a bicycle basket with flowers. This composition looks very romantic and cute. The bike is easy to make.
• Branch with sakura flowers.
• White winter flower.
• A vase filled with flowers.
• Hare with a bouquet of flowers.

Sakura is one of the options for creating a fake. It contains flowers and a tree trunk. To decorate the composition, you can add additional details to the background.

Quilling master class: flowers

Gerberas using the quilling technique - these voluminous quilling products look very beautiful. Such a complex flower will consist of 64 petals, and their core is a fringed nut. Before starting work, prepare a funnel with a radius of 2-2.5 cm.

Manufacturing instruction:

1. The flower can be made in any color: red, yellow, light pink. After you have chosen a color, you need to cut the stripes. Their width should be no more than 2 mm.
2. We twist rolls of the same diameter from them. (30 pieces - diameter 14mm, 16 pieces - diameter 9mm, 18 pieces - diameter 7mm), To do this, use a special ruler.
3. Each roll should be shaped like a drop: we pinch the edge of the roll with our fingers, and gradually pull it out with pressing movements.
4. After you have shaped all the blanks, we glue 15 large droplets together in a circle.
5. We glue our first circle to the funnel.
6. WITH back side workpieces need to glue the remaining large droplets. So your flower will acquire the required volume.
7. Now from blanks with a diameter of 9 mm, glue the circle. We also do the smallest workpieces.
8. Let's make the core of the flower. To do this, we need one black strip, 4 mm wide, and three strips, 8 mm wide, cut into a fringe. Twist the black strip into a tight spiral, and then glue the remaining strips with an openwork edge to it in turn. The core is ready. It remains only to fluff up the fringe a little;
9. Putting the flower together: insert the fringed core into the circle of the smallest petals, then also insert them into the circle of their middle details. Liberally grease the back of the flower with glue, and insert it into the blank with a funnel.

As a result, you should get a beautiful volumetric flower gerberas.

Craft quilling: mimosa

How to make fluffy silver acacia flowers? Many people associate this flower with the 8th of March.

Materials required for manufacturing:

• White cardboard;
• Yellow quilling paper;
• PVA glue;
• Special wooden rod.

The manufacturing steps are as follows. We make fringed cuts at the edge of the strip. We twist the strips into a tight spiral, fluff up the flowers. We make 10-15 of them.

Leaves can be made of two types. The first type: cut the green strip into a fringe, and then twist it with wave-like movements so that a spiral comes out.

Second type: We bend the strips and make small loops on them. We collect our parts in one composition. A sprig of mimosa is ready!

Original quilling bouquet

A quilling bouquet can be made from a wide variety of different colors... All elements of the bouquet should be done in the same style.

What can be used to make flowers for a bouquet:

1. Corrugated cardboard. Many craftsmen use it to create bouquets, crafts, postcards.
2. From special paper for quilling.
3. From homemade strips.

As a bouquet, you can make large flower balls standing in a pot or in a basket. But they will require perseverance from you, since you will need to make many small parts. But this product will decorate your home for many years.

Making chamomile quilling

The technique for making daisies is very similar to making daffodils.

How to make chamomile step by step:

1. Prepare required color stripes: white and yellow.
2. Cut the yellow stripes into fringes and twist them into a tight spiral. Let's fluff it up.
3. We spin rolls of white stripes of the same diameter.
4. We give the blanks the shape of a droplet.
5. Our chamomile will have 12 petals. We glue them in a circle, and place our core in the middle.

Your beautiful and neat daisies are ready! And most importantly, they are simple.

Quilling flowers (video)

Quilling develops well fine motor skills fingers of students, this activity brings pleasure, relaxes, and the result of the work pleases for a long time.

V Lately having a hobby has become very popular - the very idea of ​​having additional hobbies and skills has become fashionable and is being covered in every possible way both in social networks and on specialized sites. Many young women begin to master some types of needlework on maternity leave, as this is a great opportunity to escape from the monotonous routine with something interesting. And as the children grow up, it is reluctant to master a bunch of different techniques- from weaving macrame to modeling from salt dough, because competitions in kindergarten and school require a lot of crafts.

So if you need beautiful autumn - or spring - bouquets ... Why not make them using the quilling technique? Quilling crafts always look especially advantageous, even if it's just a lonely flower. Let's analyze together step by step - how to work in this style step by step.

Often women and girls who have not yet begun to engage in some specific type creativity, sort out different options before settling on one thing that you like the most or work out best. An important factor is the cost of consumables, because many types of creativity require serious investments in materials and tools.

Materials and tools

For those who would like to create amazingly beautiful things at a minimum cost, we can recommend this type of creativity as quilling. In order to get started for a sample, neither expensive tools nor hard-to-find materials are required. All that is needed is colored paper cut into strips of the same width, stationery glue and a needle inserted into an eraser. The paper should be fairly heavy- the one that is not suitable for children's creativity. In terms of density, it should be approximately like office paper. Such a simple set is enough to take the first steps in the art of quilling.

In addition, you will need a layout of the elements and one or two master classes that would describe how to make flowers with your own hands using the quilling technique for beginners. For those who find it uninteresting to make simple and voluminous flowers using the quilling technique, lettering can be offered. This is the execution of abstract and not only abstract pictures and letters using the paper-rolling technique.

Those who like the quilling technique will also not have to spend too much on additional tools and look for a place for all this. To facilitate work and speed up the process of creating paintings and other things, it will help special ruler, in which the mass of holes different forms and diameters to create the basic shapes and elements needed for the job. There are also tweezers sets for a more convenient arrangement of elements on the base, and a special handle, on which it is convenient to wind strips of paper.

In many specialized departments, and just in stationery, special sets of paper for quilling are sold, with which you can make amazing pictures, postcards and voluminous crafts with your own hands.

For those who decide to try themselves in the art of paper rolling, it is better to start with master classes on how to make a flower using the quilling technique, or quilling volumetric flowers.

Gallery: quilling flowers (25 photos)

Master class for beginners - flower quilling for beginners

Quilling flowers for beginners are distinguished by their simplicity of forms, but at the same time they are graceful and attractive. Largely beauty depends on the harmony of the composition, the correct arrangement of paper parts. The master class is designed for inexperienced craftswomen, according to the instructions with the diagrams, not only an adult, but also a child with a certain amount of patience can make such a flower with their own hands.

To work you will need:

• Good quality colored paper 5 colors - blue, cyan, lilac, green and yellow - special for quilling, or plain paper
• PVA glue and a thin brush
• Ruler, pencil, stationery knife
• The basis is a sheet of cardboard, a blank for a postcard, etc.
• A pen for twisting the strips, or a needle inserted into an eraser so that the end with the eye protrudes at least one and a half centimeters.

First stage. To make a simple flower, you don't need a diagram, it's pretty simple. Therefore, you will need 10 strips of blue paper, 10 strips of blue and 15 strips of lilac for flowers, and five strips for buds, 7 strips of paper yellow color, and 15 strips of green paper.

For the composition, strips of 3 mm wide are required. These can be special strips for quilling, otherwise can be marked and cut colored paper on one's own, it is best to do this not with nonnits, but stationery knife... Otherwise, the strip of paper will be uneven, and the work will look sloppy afterwards.

Second phase. Using a twisting tool, or a needle, twist each strip into a tight roll. After that, holding the tip with your fingers, loosen the twist a little. The total width of the element should not exceed 1 cm. Fix the tip with glue. Dissolve yellow stripes less than all the others, these are the future cores of flowers. Twist 9 elements of green paper, leave the rest of the stripes. For all colors, except for yellow, give the shape of a drop, holding one side with one hand, and flatten the other edge between the index and thumb of the other hand. Drops are petals

Stage three. Formation of the composition. Lay out the elements on the base, combining 5 pieces in flowers. A yellow element is placed in the center, from it along the circumference of the drop, with sharp tips outward.

There should be 6 flowers on the first layer, and one top on top of the lower flowers. If the composition suits you, you can fix it with glue. Place the green drops near the flowers. The buds are formed as follows. A strip of green color, on both sides of which there are drops, two on each side, with sharp tips to the stem.

Twist the remaining green stripes into a roll in half, so that the paper turns out to be a spiral on the leg. Place near the stems of the buds. Ready!

Volumetric quilling - master class on spring dandelions

How to make a flower using the quilling technique with your own hands? It's not that hard. To work you will need:

• Colored paper in sheets - yellow, preferably of several shades, and corrugated paper Green colour
• Nail scissors
• PVA glue, toothpick or thin skewer for twisting
• A strip of thick cardboard 1 cm wide and 30 cm long stationery clip
• Pencil, ruler, stationery knife.
• Floral flexible wire
• The base is a sheet of cardboard, etc.

First stage. Cut out of yellow paper with a strip of length 5. You need 3 long strips, 5-7 short strips, on the contrary, it depends on your desire. Next, you need to cut the fringe. To do this, take a yellow strip, fasten a strip of cardboard from one edge with stationery clips. Using nail scissors, finely chop the rest of the paper, not cutting it all the way through. In this case, the cardboard acts as a stopper.

Second phase. At the tip of a toothpick, start twisting the fringe. Fix the edge with glue. The strips 30 cm long must be fluffed up, giving them a dandelion-like appearance. Shorter stripes do not need fluff, these are buds.

Stage three. Cut leaves 5 cm long from green corrugated paper, fold them in half along the length and gather them a little, for this it is convenient to use a ruler. For a rich composition, 8-10 leaves will be enough. Further, from the same green paper, cut out strips 4 cm wide, 10-15 cm long. Twist the base of the flower from one edge along the width, forming a sepal. Insert the wire, wind the rest of the paper on it along the length, fix it with glue. The wire is inserted only into the buds.

Stage four. Formation of the composition. Place a large flower in the central part, frame it with three leaves, on one side, and four on the other. Place three buds on top, hide the ends of the stems under big flower... Arrange the rest of the elements in the same way, linking them into a single whole. Ready!

To make such delicate flowers, you need to create several blanks.

1. To make the middle, cut into the fringe. In this example, 11 large flowers and 4 buds are used.

2. To make the center of a large flower, prepare a paper strip peach blossom(1cm wide and 30cm long), and green (1cm wide and 10cm long).

* To make buds, the width of the paper strips must be left, and the length must be halved.

3. Start curling around the fringed centers of the flowers. Glue the green strip to the first peach-colored strip.

4. Prepare 3 orange elements and make a leaf shape out of them. These blanks need to be glued at the base - use just a drop of PVA glue.

* Do not glue the petals together, they need to be fixed only at the bottom.

5. Prepare 4 peach-colored pieces of paper and make a drop shape out of them. Next, you need to glue 2 "droplets" into the gaps that you find between the orange "petals". The remaining 2 "drops" need to be glued on top - you will need to step back from the edge of the base by about 5mm.

6. Now you need to glue the petal on top with an orange edging (all elements have the same width - 3mm). There will be 5 of them for one flower in total. The same number for buds but smaller in size.

7. Use a heat gun to pick flowers.

8. Making leaves. Prepare 4 strips approximately 3mm wide and 30cm long. These strips need to be twisted into a tight roll, and then the roll should be rolled between the thumb and forefinger so that it takes the shape of a cone.

You need to prepare 4 cones and grease each with glue in order to glue the petals of the buds and the middle into it.

9. We collect the leaf. Prepare 5 blanks and give them an "eye" shape. Next, you need to glue all these blanks together, applying glue only at the base.

10. Insert 4 more blanks between the leaves. Above you need to add 3 more blanks elongated shape... Squeeze the sides of the paper.

Several shades of green can be used.

The more greenery you use, the more beautiful the composition will look.

Fringed flowers using quilling technique (master class)

For these colors you will need strips 10mm and 5mm wide, and no more than 25cm long.

1. Start slicing the fringe. Its size is 2/3 of the width of a 10mm strip. It is worth noting that the thinner the fringe, the fluffier your flower will be.

You can cut the fringe into several strips at the same time.

2. Glue one 10mm and one 5mm paper strip and start winding the spiral, starting with a narrow strip.

Continue twisting even as you get to the fringed strip. At the end, simply secure the ponytail with glue.

3. After the glue has dried, the fringe can be folded back.

Here's what happens if you only twist the fringed strip. Yellow flowers can play the role of dandelions, pink flowers - daisies, and green centers for flowers.

You can safely change the length and color of the fringed stripes by gluing them in advance.

Volumetric flower using quilling technique

First you need to choose the color of your item. If you want a two-tone flower, you can choose two similar shades.

For one petal, choose a strip of 65cm length. You need to prepare 22 such strips by gluing several small strips into one long one.

1. Roll all prepared strips into tight rolls.

2. Dissolve each roll to a diameter of 2cm.

From the resulting elements, you can create many beautiful, and at the same time not very complex flowers.

You can complicate the task by slightly improving each diamond with a knitting needle, awl, toothpick, or a special quilling tool. Just twist the corner of each element a little.

4. Cooking the middle. To do this, you need to tightly twist a strip 10.5 cm long. If you want to make the middle in two colors, glue two strips of different colors together.

5. Prepare a wider paper strip. You can also make it two-tone by gluing two strips together.

6. Make a few small cuts in the new strip.

7. Now you need to wrap the middle with a wide strip and glue.

8. Making the base of the flower. The base will be in the shape of a cone. ...

Here simple instruction for the base: cut out a circle with a diameter of about 3cm. Draw a radius with a pencil and cut along the radius line. Now you can make a cone from the circle - use glue for fastening.

9. Glue 2 rows of petals into the cone along with the middle.

10. You can make 10 leaves following the same instructions as the petals and glue to the back of the cone.

Quilling paper flowers. Carnations.

1. Make vertical cuts in the wide red strip.

2. Wrap a toothpick in green paper and secure with glue.

3. Glue the beginning of the strip to the stem and start winding it. Finally, secure it with glue.

4. After that you have completely wrapped the paper tape, start straightening the flower.

5. Make petals out of strips of green paper and glue them to the stems.

If you make not vertical, but diagonal cuts on the strip. Then you get this version of the flower.

Do-it-yourself quilling flowers. Asters.

Prepare double-sided colored paper, scissors, rhinestones, quilling tool, glue.

1. Prepare a paper strip 30cm long and 2.5-4cm wide and fold it in half lengthwise.

2. Make a few small cuts in the strip.

3. Using a quilling tool (as already mentioned, it can be replaced with a toothpick, awl, needle, etc.), twist the strip.

4. After you have twisted the roll, carefully from the outside, begin to unscrew the fringe.

You should have a flower like this.

For different sizes of flowers, vary the size of the stripes.

How to make flowers using the quilling technique. Dandelions.

Prepare strips of yellow thick paper of two shades (for flowers), green paper strips (for leaves), crumpled paper (for stems and buds), scissors, tweezers, glue.

Each strip should be 3.5cm wide. Two strips of A4 length are enough for one flower.

1. Prepare 3 strips to cut into petals. Fold each strip in half lengthwise and fold into each other as shown in the picture. Next, you need to cut the petals about 0.5 mm in size.

2. Using a quilling tool, twist one yellow strip and secure the tip with glue. Next, wind two orange stripes on top of the yellow strip, after gluing them into one long strip.

* You can fix the flower underneath with glue.

* Gently straighten the petals.

3. Making leaves.

Prepare a small green paper rectangle. Fold it in half and cut out the shape of a leaf.

4. Squeeze the leaf into an accordion to make it look more realistic.

5. Making a bud.

Cook 1/3 paper strip and cut the petals. Roll the strip and secure with glue.

From crumpled paper, cut a strip 1.5 - 2 cm wide. Glue its edge, put a bud on it and wrap the paper. Twist the rest of the stem.

6. If you want to make a beautiful arrangement of flowers and buds, prepare a base from thick paper or cardboard.

Glue all the elements to the base. The first thing to glue is the flowers, and then the rest, smaller details.

How to make flowers using the quilling technique. Roses.

As always, you will need quilling paper, a ruler, glue, as well as wax paper and safety pins.

1. Make a "droplet" shape from the previously prepared element. This will be your bud.

2. Glue 5 petals together to make a flower.

3. Now make another same flower for the second layer of the paper rose, but make the petals smaller. To achieve this, simply do not unwind the workpiece too much.

4. Prepare a strip of yellow or green paper and fold it accordion as shown in the picture. You will get stalks.

5. Glue the stems to the paper.

DIY flower arrangement. Step-by-step instruction with photo

Maslienko Larisa Anatolyevna, physics teacher
Place of work: MBOU SOSH № 96 Barnaul Altai Territory
Description: A master class will help make paper out of paper beautiful flowers that will not fade for a long time and create good mood.
The master class is intended for teachers of additional education and technology working in grades 5-7 and for all those who liked the flower arrangement in May.
Appointment: A basket of flowers will decorate the interior of any room or will be a wonderful gift for any occasion.

Target: make flowers.
Tasks:
-develop Creative skills and aesthetic perception,
- to educate artistic taste and accuracy.

Safety precautions when working with scissors:
- Observe the cutting direction of the scissors.
- The scissors must be sharp.
- Do not hold the tool with the blade up.
- Do not leave it with open blades.
- Do not cut with scissors while walking.
- During work, do not approach your comrade and do not distract him.
- The scissors can only be passed closed and rings forward.

Safety precautions when working with glue:
- During operation, the glue should not come into contact with hands and face.
- If glue gets into your eyes, rinse them immediately with a large number water.
- After work, wash your hands with soap and water.

To work, you will need the following tools and materials:
Colored office paper, thin aluminum wire, a piece of film, styrofoam, a basket, scissors and glue.

Progress:

The central part of my flower arrangement will be tulips - very beautiful and bright flowers... Native tulips from Central Asia, India, Turkey, found in the southern parts of Kazakhstan. In Russia, tulips can be found in Altai. The name tulip comes from the word "turban", as the inhabitants of the East call the hat, and indeed, the tulip buds are similar in shape to it. Florists like to add these flowers to a bouquet, then the bouquets turn out to be delicate and bright.
A proud look and a stern figure -
This is a sunny tulip.
He settled in a flower bed
And in the spring it blossomed.
Before making a flower, let's take a close look at it.

Let's select a sheet of paper to match the color of the tulip. You need to cut it lengthwise into strips 5mm wide. Wrap the strips in a loose roller, remove and form a ring about 3 cm in size.To prevent it from unwinding, glue the end and give it the shape of a leaf.

As you can see in the pictures, a tulip has 6 petals, so you need to make 6 leaves. To fasten them into a flower, we will make dense rollers.

Roll the film into a roller, wrap a strip of paper around it and glue the ends of the strip.

Lubricate the strip generously with glue and glue dense rollers on top.

Glue 6 petals tightly to them.

On the other side of the rollers, glue the second row of rollers.
Let's make stamens for our flower.
Cut off a 2mm strip from the yellow paper. Wrap half of this strip and grease with glue. Bend the other half of the strip in half and glue it together. We need three stamens, which need to be glued together at the bottom.

We slightly bend the junction of the stamens and glue it to a dense roller, which we wind from two strips.

We will place this structure inside the tulip and glue it.

We will make leaves for our flowers.
Fold a strip of green paper in half. Glue the free ends together. We will do the same with the second and third shelves, but they need to be glued 1 cm higher from the place where the previous strip was glued. Let's give the blank a pointed sheet shape.

We pinch the workpiece on both sides.

To get a different sheet shape, the upper end of the workpiece must be wound. You can glue together 2 or three blanks.

We will roll dense rollers from green paper, which will be sepals of flowers.

Take a thin aluminum wire and wrap it in a tight green strip of paper up to the middle. Press the sheet to the wire and continue winding the strip. Glue the lower end of the strip. We get a stalk of a flower, on which we put on a dense roll, stretching it slightly.

Insert the stem into the tulip, grease liberally lower part glue and connect to the sepal.

Let's make three of these tulips.

Cut the foam to the size of the basket and glue it on top with green paper, leaving 2-3 mm allowances.

Place the styrofoam at the bottom of the basket.

Use a toothpick to make a small hole in the paper and insert the tulips into the foam.

Let's make chrysanthemums.
Cut off three strips of paper of different colors 2cm, 2.5cm and 3cm wide. Cut the strips, stepping back 0.5cm from the edge.

Wind a brush from the smaller strip. Glue the middle strip to it and continue winding. Do the same with the third strip. Remove the bud and open it into a flower.
We will get beautiful blanks of chrysanthemums.

We attach the stalks to the chrysanthemums as we attached them for tulips.

Let's make chrysanthemums of different colors.

Place chrysanthemums of the same color in a basket.

Distribute the remaining flowers evenly. We will tie several multi-colored stripes to the handle of the basket, giving them small curls with the help of scissors.

Decorate the handle of the basket with a butterfly using a pattern.

Print and cut two butterflies of the same size. On the reverse side of one half, glue strips of colored paper to the edge.

Stick the second half of the butterfly on it. Make the torso, head and antennae of the butterfly.