The Christmas tree is, without exaggeration, the international symbol of the New Year, and it is also an image associated with childish carelessness, miracles and cute fairy tales. And if there is anything to give for this holiday, it is an original Christmas tree, which you can make yourself - for example, from cardboard.

We offer you original ideas: how to make a Christmas tree out of cardboard with your own hands, ready-made templates, step by step instructions with photos and videos.

Beautiful does not mean difficult, so many models of cardboard Christmas trees can really be made even by children. Although they look very impressive, they can serve not only as an excellent craft for kindergarten or school, but also as a nice addition to a gift to relatives and friends.

From cardboard and tinsel

For the manufacture we need quite a few materials:

• white cardboard (it is advisable to take different formats - traditional A4 and larger ones from A1 to A3);
• green or multi-colored tinsel - as anyone likes;
• glue stick;
• double sided tape;
• compass;
• sweets in beautiful wrappers - round truffles look especially impressive.

Here's how to make such a Christmas tree:

Step 1. First you need to make a cone. To do this, on cardboard, using a compass, draw a circle of arbitrary diameter, depending on the height of the Christmas tree: 15 cm, 20 cm, or even 30-40 cm. Then we cut off exactly a quarter from this circle and glue the remaining parts, forming a cone, as shown in the figure.

Step 2. You can immediately make cones of different sizes, but their shape should be approximately the same - the upper corner is quite sharp.

Step 3. Now, with the help of a glue stick or PVA, we simply stick the tinsel - in a circle to the very top of the head. For beauty, you can take 2 different tinsels of contrasting shades and simply alternate them in a spiral.

Step 4 Now let's attach the candies. This can be done with glue, but it is most convenient to use double-sided tape. It turns out that such a delicious beauty is a great gift for a baby, and he can make it on his own.

And once again we will repeat the entire sequence of actions in the photo.

From cardboard and cotton pads

This craft is made a little longer, because it requires more painstaking work. However, all the actions are simple enough for younger students to cope with them.

We again need:

• cone,
• lot cotton pads(100-200 pieces depending on model size),
• glue,
• stand. It can be made from some container, a pot, which is better to decorate with tinsel beforehand.

The sequence of actions is as follows:

Step 1. First, as in the previous case, we make a cone.

Step 2. And now we prepare cotton pads. They just need to be folded in half 2 times, then apply glue to the bends and fix them on the surface of the cone, as shown in the photo.

Step 3. And so we glue the cone with discs to the very top. This should be done quite carefully, in even rows. For convenience, on the surface of the cone, you can first (still on the circle) draw several even rows for reference with a compass.

Step 4. Now let's make a stand. To do this, take a small pot and wrap it with shiny paper or tinsel, fixing it with glue.

You will also need to make a "barrel" from a cardboard tube, on which to stick a circle of cardboard. It is attached to the inner side of the cone, after which the structure becomes quite stable.

Step 5. Well, now the most pleasant stage is to decorate the Christmas tree in the way that fantasy tells. Ribbons, bows, tinsel, sparkles, colored paper figurines will do. It turns out a real collective creativity, in which several kids can participate.

You can see the whole process visually here:

In general, making Christmas trees from cardboard based on a cone is a fairly popular technique that allows you to use creative imagination in all its glory. Indeed, along with cotton pads and tinsel, you can use the most different materials- for example, threads, self-adhesive rhinestones, etc.

10 inspiring ideas: how to make a Christmas tree with your own hands

And there are other ways to make Christmas trees - here are 10 ideas for inspiration.

Christmas tree made of cardboard - original photo stand

And now let's move on to a more complex cardboard Christmas tree model. For instance, original gift- photo stand You can make such a Christmas tree with your own hands and give it to colleagues, relatives and friends, and just please yourself. original decoration for your favorite holiday.

Each person has, perhaps, hundreds and thousands of photos in stock, but among them there will surely be that very favorite photo that creates in itself festive mood. Why not make a special stand for such a picture?

We will need:

• green cardboard - 1 sheet;
• a skein of thick threads of green or blue-green color;
• white boucle threads or cotton balls;
• glue;
• pencil;
• scissors;
• beads;
• glue gun.

We will act in stages:

Step 1. First of all, we fold a sheet of green cardboard in half with the wrong side outward, after which we depict a half of the Christmas tree on it. To do this, you can simply print the template or draw from the sample.

Step 2. Cut out the workpiece along the contour (when folded).

Step 3. Now let's take up the threads. They need to be folded in layers several times and cut into small pieces (1-2 cm each), putting them in a previously prepared container.

Step 4. Now comes the rather painstaking stage of work. Lubricate the surface of the Christmas tree with glue-pencil and stick the skeins on it. It is better to do this in stages so that dust does not accumulate on the sheet.

Step 5. In this way, you need to decorate only the top 3 sections, since we will decorate the bottom one differently.

Step 6. Let the Christmas tree lie down for a few minutes, and the glue will dry a little. In the meantime, take a boucle thread or just roll up a few small lumps of snow-white cotton wool.

Step 7. These lumps can be glued with a glue gun or glue stick. The work must be done carefully enough so that no glue stains remain on the surface.

Step 8. And now you need to make tinsel for decoration. We will use a thread-grass or other similar material.

Step 9. We attach tinsel, glue other decorations - we get such a festive stand for a photo.

New Year in the office: Christmas tree in a hurry

There are cases when you need to make a Christmas tree literally in a matter of minutes - for example, a friendly company is ready to receive guests or the team is actively preparing for a festive corporate party, which is about to begin. For such situations, we can get by with the simplest version of the Christmas tree with our own hands.

We will need:

• sheets of colored cardboard or any cardboard and green paint;
• scissors;
• pencil;
• colored paper, sequins and other elements for decoration.

Creating such a model will not take much time:

Step 1. First, fold the cardboard in half and draw a half of a Christmas tree on it - literally 3 or 4 triangles of different sizes, as well as a small trunk. Cut out along the contour. We attach the blank to another sheet of cardboard, draw a pencil around the contour and cut out exactly the same model.

Step 2. Cut out the stand: cardboard circles with bases (2 or 3 intersecting lines). We make neat cuts along the lines.

Step 3. And now we bend the Christmas tree blanks in half and insert them one by one into these slots: 2 or 3 each, depending on how many lines are made at the base.

Step 4. It remains only to paint the Christmas tree in green color and dress her up with colored figurines, sparkles and other materials.

For example, here are such stars, which can also be cut out of cardboard.

By the way, a cardboard Christmas tree can withstand even the weight of a small garland - we will use this opportunity.

How to make a Christmas tree out of cardboard with your own hands: 10 ready-made templates

Of course, in the manufacture you can use ready template. Here are a few samples of the New Year's forest beauty that can be printed, cut out, and then made from cardboard in a matter of minutes.

Christmas tree 3D in papercraft technique

And here is another very interesting model of a forest guest, which, despite such an ornate name, is made quite simply. Although, of course, in this case you need to spend a little more time.

And the result will definitely please you, because ready product will look like this:

In order to make a Christmas tree from cardboard with your own hands using the papercraft technique, we will need:

• several thin sheets of cardboard (or thick sheets of colored paper). By the way, they can be alternated in color: dark and light green;
• glue;
• compass;
• ruler;
• pencil,
• and also a stick or wire.

We will act like this:

Step 1. The product is based on the same workpiece - this is a circle drawn by 6 lines and 2 circles. The largest circle is twice the diameter of the smaller one.

Step 2. Such blanks need to be made 5-6 pieces or even more. Each subsequent one is 1-2 cm smaller than the previous one in diameter.

Step 3. After all the models are prepared, we cut the circle inward to a smaller circle, as shown in the photo. We glue each fragment, making a cone out of it.

Step 4. At the last stage, we simply string each element onto a stick or wire (you first need to make a hole in the center with a needle).

Step 5. The crown can be made from a small cone of the same color. It remains only to decorate our Christmas tree and put it in the most prominent place.

In the papercraft technique, you can make several different Christmas trees- “thicker” and “leaner”. It will turn out a small forest, which will surely be able to create a cozy atmosphere of childhood in any home.

By the way, this "forest" is easy to make suspended - for this you can take beautiful ribbon and attach it to the top of the trees with glue or a needle.

Details and comments can be seen here:

Folding Christmas tree made of cardboard - we make it easy and fast

Here's another option for hastily- such a Christmas tree is made from several cardboard circles, which are also mounted on a skewer.

Accordingly, we need:

• cardboard,
• wire or wooden stick,
• as well as a lid plastic bottle or another similar object - it will be a stand.

We will act like this:

Step 1. Cut out several circles of different diameters - each subsequent one should be 2 cm smaller than the previous one.

Step 3. After all the blanks are ready, we straighten them, make a small hole in the center and put them on a skewer.

Step 4. The last step is to make a hole in the stand (lid) and attach the skewer to it. We decorate our Christmas trees - that's all, the holiday is approaching!

Here are just a few examples of how to make a cardboard Christmas tree with your own hands. It is clear that the finished model can be completely different size- from small beauties on the table to quite large ones that can be placed on the floor or on the nightstand.

Create a festive mood and gifts - to the delight of yourself and your loved ones!

Happy New Year!

30.11.2018 154

Christmas tree made of paper - 5 options for how to make

Children want to see a green Christmas tree at home long before the long-awaited New Year. And making a copy of it with your own hands is a great alternative. A small fluffy Christmas tree will appear on the table if you pick up paper, scissors, glue and study our master classes. In this tutorial I will show several options for how to make a Christmas tree out of paper with your own hands with unique step by step photos. This is New Year's Eve preparation for your favorite winter holiday.

If to while away winter evenings, performing excellent ones, you will get a double benefit: you can brighten up the expectation, and have fun, and get wonderful souvenirs as a gift to your beloved relatives or friends.

Fluffy Christmas tree do it yourself

The proposed craft is a great option for creativity for kindergarten. For execution, the simplest and cheapest materials are used. There is an opportunity to practice, even if the child ruins something, there is always the opportunity to start over, because you don’t feel sorry for plain paper. Cardboard will form a cone-shaped base for the tree, and soft paper will become a covering - fluffy thorns.

To create a fluffy paper Christmas tree, prepare:

• Cardboard with a gray matte surface (not glossy);
• Green paper (regular soft sheets);
• Pencil and ruler;
• Scissors;
• Glue or double-sided tape;
• red paper;
• skewer;
• 2 crystal stones.

You can immediately cut a circle out of cardboard. Use a round saucer, circle its outlines with a pencil, then cut it out. The surface of the cardboard should be matte, rough, so that it quickly sticks to it. plain paper if it is glossy, then working with the central part, decorating it, will be quite difficult.

Cut the circle along one radius (to the center).

An incision is needed in order to form a cylinder. Roll the paper to the desired state. Lubricate the ends with glue and squeeze with your fingers or a clothespin, waiting for the glue to grab.

Cut green soft paper into long strips. Their length is arbitrary, and the width is approximately equal to 2 cm.

Each strip must be turned into a thick fringe. But you can speed up this process if you combine all the parts at once, then cut them at the same time, because the paper is thin, it is well cut with scissors and in several layers.

Make a few strips of fringe to further fill the surface of the cylinder.

Start attaching the fluffy crown to the cylinder. Be sure to move from the bottom up, layering more and more fringe rings. Lubricate with glue only that part of the strip that remained intact after incision. Double-sided tape can also help if you want a neater result.

First, glue the strips around the circumference in the right places, then remove the top protective film on the adhesive tape and press the green fluffy rings on top. Fill the entire cone with a fluffy crown.

Cut out 2 identical stars from red paper and prepare a stick.

Glue both stars, combining the surface, put a stick in the middle. Insert the stick into the top hole, which is sure to remain after the crown is formed. Glue sparkling crystals on both sides of the star. Christmas tree paper is ready!

Master class on creating an openwork paper Christmas tree

Anticipating the approach of the most long-awaited celebration - the New Year, people are trying in every possible way to decorate their homes. Everyone knows that the Christmas tree is the main attribute of the New Year holiday. Therefore, the very green beauty” or decorations in the form of this tree can be seen everywhere. An openwork Christmas tree cut out of paper will look very unusual and at the same time stylish in a festively decorated interior.

To make this craft, you will need:

• thick paper;
• sharp mock-up knife or nail scissors;
• ordinary scissors;
• stapler.

First of all, you need to make a pattern for the future Christmas tree. To do this, you can use the printer to print the sample you like from the Internet or use a carbon paper to transfer the template to paper. Creative people can try to draw a pattern on their own. But keep in mind that the smaller the internal pattern of the Christmas tree, the more delicate and beautiful it will turn out in the end.

Take two sheets of thick paper, place the template on top and fasten all three sheets together using a stapler.

First, cut out the pattern inside the Christmas tree. Start with the smallest details, gradually moving to larger ones. Cutting out tiny elements from paper is a very laborious job that requires perseverance and a lot of patience.

If you have not practiced the cutting technique with a breadboard knife, then it would be better to use sharp scissors. Place a board under sheets of paper in order to avoid damaging the surface of the table.

After finishing the inner pattern, move on to the outer contour.

As a result, you should get two Christmas trees.

By connecting them with slotted locks, you will get a very beautiful openwork Christmas tree that will certainly decorate festive table and add a touch of romance and magic to the New Year's Eve atmosphere.

Christmas tree from one sheet of paper

It is unlikely that anyone will argue that the main character of the New Year is the Christmas tree! The holiday would not be a holiday without her presence. Therefore, today we will make a festive beauty from colored paper. This craft is very easy to make, so you can safely attract children!

For crafts we need:

• Sheet of green and red paper;
• Scissors;
• Glue;
• Ruler;
• Pencil.

Please note that colored paper must be the same color on both sides. Otherwise, the tree will not work.

For work, we need a sheet of green colored paper. Cut out a square from it. The size of the future craft depends on its size. The larger the square, the larger the Christmas tree will be.

Now we fold this square into a triangle.

We place the triangle with the base towards us. Now we need a ruler and a pencil. We retreat from the edge 1 cm.

We draw a horizontal line with a simple pencil. Next, we need to line the triangle. All lines should be the same 1 cm.

Now, with scissors, carefully cut the triangle along each of the drawn lines.

We straighten the part back into a square and position it so that the very first horizontal line becomes vertical. It is important to put our blank with the drawn lines up. Take the bottom strip, fold it up and glue it.

Now take the strip on the right side and do the same with it. We impose it a little on the strip on the left side.

Now, in the same way, take the next strip on the left and glue it. Then take the strip on the right and also glue it.

So you need to collect the Christmas tree to the end. Be sure to always alternate in the same order. First the strip on the left, then on the right. Or vice versa, if the first strip was taken on the right. Due to the fact that we placed the part with lines from the pencil up, they became invisible when gluing.

Cut off the rest of the top with a little scissors.

Now let's make a star. We take a small sheet of red paper and draw a star on it. Or you can use a template, if available. You can initially cut out a template from cardboard, and then circle it on a sheet of red paper. Cut out the star.

Glue it to the top of the Christmas tree. Slightly go to the extreme strips. The paper Christmas tree is ready! It is perfect for decorating a festive interior.

Video lessons

Christmas tree from newspaper tubes do it yourself

Christmas tree from corrugated paper do it yourself

See how to do it here.

We will send the material to you by e-mail

Not everyone is born to be a great artist, and sometimes people are simply afraid to try their hand at handicrafts, and for good reason. If you follow the tips and instructions from the editors of the site, it will not be difficult at all to make beautiful and elegant Christmas trees out of paper and cardboard (volumetric) for the New Year!

Paper is always in demand, and especially on New Year's Eve, because it is such a wonderful material for applied art! paper products with careful handling and storage, they can last more than one holiday, but modern material- bright and colorful, which allows you to fully use such decorative crafts in the interior.

We offer you to learn how paper Christmas trees are made and make the same beauty yourself.

We create a volumetric Christmas tree

For those who do not remember how to work with paper, we will remind you of a few simple rules:

• We do not allow any errors in paper sizes. If you need a square - it will be a figure with equal sides, you need a rectangle - let it be a rectangle, even and beautiful;
• all fold lines are usually carefully ironed with a fingernail - the accuracy of the folds allows you to assemble full-fledged high-quality products;
• paper should not be of poor quality and tear at the slightest attempt to bend or cut it.

To assemble a voluminous fluffy Christmas tree, you need scissors, colored paper and a little glue.

Illustration	Action Description
	We use green paper. We turn the sheet into a square, bending one corner so that the edges coincide with each other. Cut off the remaining strip and discard.
	We need fold lines, so we fold the sheet and iron the resulting folds, first along one diagonal of the square, then along the other. Then fold the paper in half.
	Unfold the product incompletely, leaving one corner folded.
	We bend a free corner to the folded part, as in the photo.
	Now the resulting trapezoid needs to be turned into a square by pulling it by the middle of the base and bending it to the right corner.
	It turns out such a figure in a turn.
	We bend sequentially each of the corners to the center. We turn the product over and do the same on the other side. Unfold one corner and bend it inward.
	So we do with every corner.
	Cut off the lower part of the resulting tie.
	It is necessary to make cuts on the sides of the product.
	At each side of the Christmas tree we bend upper part from notch to base.
	We straighten the branches of the fluffy beauty!

Funny prickly Christmas tree made of paper tubes

Everyone has heard about weaving from newspapers, but not everyone is ready to master it. But trying to make tubes out of paper and sticking them on the base of the Christmas tree is a simple and interesting task.

Those who wish to master weaving from newspaper tubes should be patient: first you need to prepare a considerable number of tubes. To do this, the newspaper is cut into strips 5 cm wide. Each strip is wound onto a thin knitting needle at an acute angle, gluing the free tip with a PVA tube at the end. After that, they decide how they will paint the product: immediately the tubes or the finished craft. Staining is done with any convenient way. Someone dips the blanks in paint, in stain, someone paints them with a brush on the grid. The finished Christmas tree can be painted from a spray gun.

Video: beautiful wicker tree

Cute fluffy Christmas tree for drop-down cards

Paper Christmas trees for the New Year can be made by a child under the guidance of an adult. For crafts, you need colored paper, a base for a postcard, PVA glue, a simple pencil and scissors.

How to make a Christmas tree box out of cardboard or thick paper: great gift wrapping

Sometimes you puzzle over what to pack New Year's souvenir or a nice gift. Handmade packaging will always touch the heart of the donee, so let's spend some time in creative work.

Advice! It is better to decorate the box with beads, snowflakes, sequins.

Let's make a voluminous Christmas tree out of paper and cardboard with our own hands and decorate the interior

There are many simple and great ideas to use a Christmas tree made of paper for decoration New Year's interior rooms. A voluminous beauty, even if not brought from a store and not grown in the forest, will serve wonderfully to lift the mood for the holiday.

Volumetric Christmas trees: conical base

First of all, we are wondering how best to make a cone for a Christmas tree out of cardboard. A dense, durable cone is a guarantee that the product will last all new year holidays without deformation.

Cardboard, thick paper and the remains of wallpaper are suitable for the cone.

How beautiful to decorate a cone base

A cardboard cone is easy to use different decorations turn into a fairy tree. The simplest solution available to everyone is braiding a cone with paper fringe. It is better to make a fringe from corrugated paper. But if it is absent, then ordinary colored paper will do: we cut the strips of the desired width, glue them into one long strip. If they are carefully folded several times without crushing the edges, then you can immediately cut a beautiful fringe along the entire length.

Christmas trees made of cardboard from the blades

Following the principle of creating a product from the blades, it is easy to make a Christmas tree of any size. The essence of the work is the preparation of two, three or four identical patterns of the silhouette of a New Year's tree with slots at the top and bottom. No glue is needed for assembly, the craft will stand without problems.

From two templates, a four-blade Christmas tree is obtained.

Volumetric Christmas trees: carved art of vytynanka

Many are familiar with the paper cutting technique called vytynanka. We suggest creating a Christmas tree of magical beauty using paper, a pencil (or a printed template), scissors and a cutter knife.

Christmas tree paper templates

It is worth taking a look at the idea of ​​a Christmas tree in such a wonderful technique:

Article

The New Year is already very close! And he must be met with full force! Ready to decorate with us? Today we will have many options! Choose what you like best and repeat each step according to the photo! So, let's get started - do-it-yourself paper Christmas tree!

CHRISTMAS FROM PAPER OWN HANDS

Let's start our work with such a wonderful Christmas tree! Here, it seems, every step is painted, but something is not right ... Apparently, only origami lovers can understand these works! After all, origami is an art!

CHRISTMAS FROM PAPER VOLUMETRIC

Christmas tree made of paper with your own hands from circles. Now this is a completely understandable option! Preparing a large number of circles of different diameters. We cut the circle, as shown in the figure, glue it into a flower. And he puts our blanks on the wire. Not bad! The tree turns out unusual and beautiful!

HOW TO MAKE A CHRISTMAS FROM PAPER

And this is an example of how to make a garland of Christmas trees! You may well not waste time on tinsel, but fix our blanks on the existing tinsel. We simply cut out an uncountable number of Christmas trees, fix them on threads and carefully hang them on tinsel. And the Christmas tree made of paper with your own hands is ready!

HOW TO MAKE A CHRISTMAS FROM PAPER WITH YOUR HANDS

And this is another one more difficult option work, which refers to such a type of creativity as origami. Fold, unbend, bend, fold, unfold ... In general, let's repeat all the steps in the photo and see what happened to someone? How do you like the idea?)) A little lower you can watch a video on how to make this Christmas tree out of paper with your own hands.

And this is a continuation of our Christmas tree made of paper. The Christmas tree, of course, turns out to be indescribably beautiful! No glue, no chemicals... With these Christmas trees, you can safely decorate a baby's room and be calm for his health!

AND HERE IS A VIDEO HOW TO MAKE THIS PAPER CHRISTMAS WITH YOUR HANDS!

3D PAPER CHRISTMAS

Below we have prepared for you 3 more options for Christmas trees made of paper. Agree that it turns out very elegant and beautiful! Such Christmas trees will decorate New Year's Eve and will give you a lot of positive emotions!

And this do-it-yourself paper Christmas tree is made of openwork details. Very nice!

The article was prepared specifically for the site

Click Class

Tell VK

We continue to decorate our home for the winter holiday. We have already made various ones, hung them on windows and walls. Now we want to give the holiday symbolism. And this, of course, is the main princess of the celebration - the Christmas tree. I know that many feel sorry for the trees and replace them with artificial counterparts. But sometimes you just want to make something with your own hands in order to get satisfaction from the action and accent in the decor.

All craft ideas are easy to do with the kids. To make it easier to do the job, make the basics in advance. And try not to skimp on decor. Buy more different beads, ribbons, ribbons, beautiful buttons. Collect small toys from kinders and decorate with them. And they will go into business and will not wallow.

You can create beauty from everything that is at hand. The main thing is to attach to this a share of imagination and all your accuracy. With modern devices, such as a glue gun, you can give the product original shapes and fix different textures and materials.

I know that wine bottle corks and ice cream sticks are also used. Well, we didn’t have traffic jams at home, and the sticks have long been sold for different needs, so we turn to materials that any housewife will definitely have - pasta and yarn.

Let's start with pasta. I know that various snowflakes are made from them. It turns out that they are also suitable for the Christmas tree.

We will need:

• A pack of pasta (better to take feathers)
• glue gun
• Cardboard sheet
• Dye
• Decor

It is better to prefer the shape of "feathers" or "spirals". choose good manufacturer so that all the little things are even and the same length.

First of all, we glue a cone out of cardboard. I do this by simply twisting the sheet around my hand. To prevent the workpiece from falling apart, we fasten it with a stapler.

And now we cut the base so that the tree stands straight, and not crooked.

We always start from the bottom. “Lay” the first two rows, i.e. glue them so that they lie on the surface, so the product will be more stable.

And the next rows need to be raised exactly on the previous one by an amount equal to half the “spiral”.

When you finish the top, we begin to cover the entire craft with paint.

You can take green, or you can buy gold or silver paint in a spray can. Only then you need to spray it not at home.

I really like the result. It doesn't take much time, but it looks very elegant.

Now it's the turn of yarn and cord.

To make a Christmas tree out of yarn, you need to paper cone wind the thread evenly over each other. Periodically fastening it with hot glue to the base.

Decorate with decor.

This product is made even faster than pasta.

You can decorate them with buttons.

We will need:

• Wire
• Decor

First, we select the wire. It should be firm and not thin. From it we turn a cone-shaped spiral. We check for stability. The bottom can be wrapped twice.

We begin to string the cord on the wire.

Dry and decorate.

Glue will give the structure additional strength and will not allow the cord to slide down the frame.

Volumetric Christmas tree made of paper

Paper is always the first thing that the word "craft" is associated with. And from it you can create not one Christmas tree, but a whole spruce forest in which not a single tree will be repeated!

Let's say we want a paper tree to delight us on the kitchen table. Then you need to make it fluffy and voluminous. And also the most stable.

So, I picked up a few detailed master classes with a clear description of the process.

Option 1

We will need:

• cardboard cone
• Paper of green color of different shades.

We cut out many circles of the same size from paper.

And we begin to glue their edges to the cone, observing the rows.

The first layer always goes at the base.

This craft is available in terms of difficulty, even two year old. And it looks quite rich because of the different shades of the same color.

Option 2. Terry cone herringbone

Cut out 4 half circles. Each of them is smaller than the previous one in diameter by 2 centimeters.

We glue the blanks into a cone and cut the edges around the perimeter a little to get the volume. Fold the terry edges a little.

Now glue a smaller cone on the largest workpiece. And so in the direction of decreasing.

That's the whole easy process.

Option 3. Let's make a Christmas tree from paper circles

Cut out 4 circles. Each of them is 1 centimeter smaller than the previous one.

Then we fold each circle 3-4 times in half.

We also make the base out of paper. You can wrap green paper around a pencil or a kebab stick.

We string round blanks on the barrel in descending order of size.

To give stability, you can plant the trunk in plasticine, wax or a wine cork.

Option 4

We mark 15 circles, each time reducing the diameter by 1 centimeter. Then we divide each circle into 12 equal parts, drawing lines through the center.

From the center mark half the radius and draw a circle. Now we cut the lines clearly to the drawn circle.

Glue the tips on each petal.

When you have completed all the levels, start collecting the Christmas tree from the widest row to the smallest.

How do you like the ideas, I think that you will find ideas for yourself.

Craft from cotton pads for the new year in kindergarten

The child was taken aback by the task that tomorrow you need to bring crafts to kindergarten? And outside the window, of course, it is already night. Then you can use the packaging of cotton pads. In most families, they are actively used.

We will need:

• Packing of cotton pads
• Cardboard for the cone base
• PVA glue
• Decor

We fold the cardboard frame, connect the edges with a stapler.

Take a cotton pad and fold it in half.

Then, on a harmless PVA glue, we plant two tips of a cotton semicircle.

And we glue the workpiece to the base, after smearing its fold with the same PVA glue.

So we do row by row. It is better to glue cotton pads closer to each other so that there is a minimum of gaps.

It remains only to decorate the delicate beauty!

To the kids in kindergarten you will definitely like your product, and you will not be ashamed in front of other parents.

DIY craft from napkins

Another very affordable material is napkins. You can use the most inexpensive and monophonic.

We take white, red, blue and green festive shades.

We fold the napkin several times to get the shape of a square, then cut the fold points and cross-fasten the middle with a stapler.

Now we bend each layer, forming a pompom.

Lay out the first row on the frame with these balls. Then we glue balls and other Christmas tree decorations on double-sided tape.

And fill the entire surface of the frame with napkins.

Everything is pretty fast.

By the way, you can see how to make from napkins here. It also turns out very nice.

Candy Christmas tree

A wonderful gift would be a candy craft: buy a box of good candies in a beautiful package at the grocery store.

It is made of two parts - a base for sweets and a barrel.

We glue the base with a side of 23 centimeters. When cutting, indent along the bottom edge and at one edge 1 cm. We will apply glue to them.

Decorate beautiful paper or film. Glue the bottom to its base.

We make the trunk, decorate it and glue it with the frame.

Now we evenly put sweets, braid or Christmas tree beads on the hot glue.

Use the same color scheme for the base and candies.

We make a Christmas tree for the New Year from pine cones

Natural material always gives the desired zest to the decor. It immediately smells of freshness and resin at home. Will give a symbolic meaning to this winter holiday.

Cones are also suitable for various crafts.

You can create a Christmas tree from only cones, or you can dilute them with sisal balls, decorative flowers or fir branches.
The combination of cones and dried citruses also looks unusual.

Glue the cones onto the base with hot glue. You can not think about the side that you have them. This will give a slight bewitching negligence to the product.

Alternating bumps with Christmas balls or other decor.

We cover with artificial snow or white enamel from the sprayer.

Everything is quite easy, and the result is incredibly beautiful.

Light tinsel Christmas tree

We can't imagine the New Year without tinsel! There are no decorations on it now: stars with balls, and multi-colored tips. It decorates windows, curtains, walls and, of course, is used as a material for crafts: wreaths and Christmas trees.

Since most tinsel manufacturers thread it on a thin wire, it is easy to bend and shape in all sorts of ways.

A spruce tree is made from it in three minutes!

We will need:

• Tinsel
• Cardboard sheet
• Double sided tape.

From cardboard we make a base in the form of a cone and glue it with double-sided tape.

We remove the protective film from the first row and begin to glue the end of the tinsel, tightly wrapping the frame.

If you didn’t have enough tinsel, then glue the end with tape, and put the next fluffy ribbon of the same color on top of it.

Fluffy pom-pom beauty

Pompoms have also long been loved by our craftswomen. Previously, we made a dog out of them, now we will create a fluffy beauty.

The balls themselves can be made in two different ways: winding 20 layers on a fork or use two round blanks.

We will go with the second method.

We take cardboard or plastic, cut out two identical rings.

Now stepping back from the edge of the thread 5 centimeters, we begin to wind the yarn very tightly.

Then cut the outer fold between the blanks.

With the thread end left, we tie the middle of the pompom so as not to lose all the threads.

Now we are looking for a thick wire and turn it into a spiral. Leave the base wide. We string pom-poms on it.

If the wire is not found, then we use the experience of previous products and form a triangular or conical base.

Felt Christmas Tree Ideas

Felt is also popular with our craftswomen. No matter what they do, educational toys and Christmas tree decorations. Today I will give a few ideas for creating a spruce tree.

From the most simple options to complex.

Option 1. Cut out 10 Christmas trees of the same size from felt. Fold in half and glue the fold to the trunk.
We use branches, saw cuts of trees (preferably spruce or pine).

Option 2. Cut out many identical triangles from felt.

Glue them to the frame in rows. The upper triangle lies between the two lower ones!

Option 3. Prepare 5 squares different sizes: 9 cm, 7 cm, 5 cm, 3 cm, 1 cm.

We make five of each size.

Now we string the largest squares onto the thick one, distributing them diagonally to each other so that there are no voids.

We pass all the squares like this.

New Year's beauty from fabric

And two more ideas of fabric beauties in the piggy bank. Ends can be finished decorative seam thick contrast thread. Sew buttons or beads onto symbolic branches.

Use several colors of fabrics and textures. For example, take velvet on one side and linen on the other.

You can also choose different patterns in one color scheme or vice versa to play with flowers - companions.

You can fill the Christmas tree with holofiber, synthetic winterizer or cuts, the remnants of your creativity.

If the product is small, fill it with cotton wool.

My dear, I tried to find for you the most interesting and affordable materials for creativity. I'd love to hear your opinion in the comments!

tweet

Tell VK